ARM: LPC32xx: Fix missing and bad LPC32XX macros
Some of the LPC32XX_* macros were typed ("LCP32XX_*"), which is fixed by this
patch. (Besides another LCP doc typo.)
Further, the LPC32XX_GPIO_P2_MUX_SET/CLR/STATE macros were missing.
Signed-off-by: Roland Stigge <stigge@antcom.de>
This commit is contained in:
Roland Stigge
Родитель
6b21d18ed5
Коммит
cfac337b0f
|
|
@ -591,42 +591,42 @@
|
|||
/*
|
||||
* Timer/counter register offsets
|
||||
*/
|
||||
#define LCP32XX_TIMER_IR(x) io_p2v((x) + 0x00)
|
||||
#define LCP32XX_TIMER_TCR(x) io_p2v((x) + 0x04)
|
||||
#define LCP32XX_TIMER_TC(x) io_p2v((x) + 0x08)
|
||||
#define LCP32XX_TIMER_PR(x) io_p2v((x) + 0x0C)
|
||||
#define LCP32XX_TIMER_PC(x) io_p2v((x) + 0x10)
|
||||
#define LCP32XX_TIMER_MCR(x) io_p2v((x) + 0x14)
|
||||
#define LCP32XX_TIMER_MR0(x) io_p2v((x) + 0x18)
|
||||
#define LCP32XX_TIMER_MR1(x) io_p2v((x) + 0x1C)
|
||||
#define LCP32XX_TIMER_MR2(x) io_p2v((x) + 0x20)
|
||||
#define LCP32XX_TIMER_MR3(x) io_p2v((x) + 0x24)
|
||||
#define LCP32XX_TIMER_CCR(x) io_p2v((x) + 0x28)
|
||||
#define LCP32XX_TIMER_CR0(x) io_p2v((x) + 0x2C)
|
||||
#define LCP32XX_TIMER_CR1(x) io_p2v((x) + 0x30)
|
||||
#define LCP32XX_TIMER_CR2(x) io_p2v((x) + 0x34)
|
||||
#define LCP32XX_TIMER_CR3(x) io_p2v((x) + 0x38)
|
||||
#define LCP32XX_TIMER_EMR(x) io_p2v((x) + 0x3C)
|
||||
#define LCP32XX_TIMER_CTCR(x) io_p2v((x) + 0x70)
|
||||
#define LPC32XX_TIMER_IR(x) io_p2v((x) + 0x00)
|
||||
#define LPC32XX_TIMER_TCR(x) io_p2v((x) + 0x04)
|
||||
#define LPC32XX_TIMER_TC(x) io_p2v((x) + 0x08)
|
||||
#define LPC32XX_TIMER_PR(x) io_p2v((x) + 0x0C)
|
||||
#define LPC32XX_TIMER_PC(x) io_p2v((x) + 0x10)
|
||||
#define LPC32XX_TIMER_MCR(x) io_p2v((x) + 0x14)
|
||||
#define LPC32XX_TIMER_MR0(x) io_p2v((x) + 0x18)
|
||||
#define LPC32XX_TIMER_MR1(x) io_p2v((x) + 0x1C)
|
||||
#define LPC32XX_TIMER_MR2(x) io_p2v((x) + 0x20)
|
||||
#define LPC32XX_TIMER_MR3(x) io_p2v((x) + 0x24)
|
||||
#define LPC32XX_TIMER_CCR(x) io_p2v((x) + 0x28)
|
||||
#define LPC32XX_TIMER_CR0(x) io_p2v((x) + 0x2C)
|
||||
#define LPC32XX_TIMER_CR1(x) io_p2v((x) + 0x30)
|
||||
#define LPC32XX_TIMER_CR2(x) io_p2v((x) + 0x34)
|
||||
#define LPC32XX_TIMER_CR3(x) io_p2v((x) + 0x38)
|
||||
#define LPC32XX_TIMER_EMR(x) io_p2v((x) + 0x3C)
|
||||
#define LPC32XX_TIMER_CTCR(x) io_p2v((x) + 0x70)
|
||||
|
||||
/*
|
||||
* ir register definitions
|
||||
*/
|
||||
#define LCP32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
|
||||
#define LCP32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
|
||||
#define LPC32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
|
||||
#define LPC32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
|
||||
|
||||
/*
|
||||
* tcr register definitions
|
||||
*/
|
||||
#define LCP32XX_TIMER_CNTR_TCR_EN 0x1
|
||||
#define LCP32XX_TIMER_CNTR_TCR_RESET 0x2
|
||||
#define LPC32XX_TIMER_CNTR_TCR_EN 0x1
|
||||
#define LPC32XX_TIMER_CNTR_TCR_RESET 0x2
|
||||
|
||||
/*
|
||||
* mcr register definitions
|
||||
*/
|
||||
#define LCP32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
|
||||
#define LCP32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
|
||||
#define LCP32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
|
||||
#define LPC32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
|
||||
#define LPC32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
|
||||
#define LPC32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
|
||||
|
||||
/*
|
||||
* Standard UART register offsets
|
||||
|
|
@ -690,5 +690,8 @@
|
|||
#define LPC32XX_GPIO_P1_MUX_SET _GPREG(0x130)
|
||||
#define LPC32XX_GPIO_P1_MUX_CLR _GPREG(0x134)
|
||||
#define LPC32XX_GPIO_P1_MUX_STATE _GPREG(0x138)
|
||||
#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
|
||||
#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
|
||||
#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
/*
|
||||
* LPC32XX CPU and system power management
|
||||
*
|
||||
* The LCP32XX has three CPU modes for controlling system power: run,
|
||||
* The LPC32XX has three CPU modes for controlling system power: run,
|
||||
* direct-run, and halt modes. When switching between halt and run modes,
|
||||
* the CPU transistions through direct-run mode. For Linux, direct-run
|
||||
* mode is not used in normal operation. Halt mode is used when the
|
||||
|
|
|
|||
|
|
@ -34,11 +34,11 @@
|
|||
static int lpc32xx_clkevt_next_event(unsigned long delta,
|
||||
struct clock_event_device *dev)
|
||||
{
|
||||
__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
|
||||
LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
|
||||
LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
|
||||
LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
|
||||
LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -58,7 +58,7 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
|
|||
* disable the timer to wait for the first call to
|
||||
* set_next_event().
|
||||
*/
|
||||
__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_UNUSED:
|
||||
|
|
@ -81,8 +81,8 @@ static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
|
|||
struct clock_event_device *evt = &lpc32xx_clkevt;
|
||||
|
||||
/* Clear match */
|
||||
__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
|
||||
LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
|
||||
LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
|
||||
|
||||
evt->event_handler(evt);
|
||||
|
||||
|
|
@ -128,14 +128,14 @@ static void __init lpc32xx_timer_init(void)
|
|||
clkrate = clkrate / clk_get_pclk_div();
|
||||
|
||||
/* Initial timer setup */
|
||||
__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
|
||||
LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
|
||||
LCP32XX_TIMER_CNTR_MCR_STOP(0) |
|
||||
LCP32XX_TIMER_CNTR_MCR_RESET(0),
|
||||
LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
|
||||
LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
|
||||
__raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
|
||||
LPC32XX_TIMER_CNTR_MCR_STOP(0) |
|
||||
LPC32XX_TIMER_CNTR_MCR_RESET(0),
|
||||
LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
|
||||
|
||||
/* Setup tick interrupt */
|
||||
setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
|
||||
|
|
@ -151,14 +151,14 @@ static void __init lpc32xx_timer_init(void)
|
|||
clockevents_register_device(&lpc32xx_clkevt);
|
||||
|
||||
/* Use timer1 as clock source. */
|
||||
__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
|
||||
LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
|
||||
__raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
|
||||
__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
|
||||
__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
|
||||
LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
|
||||
__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
|
||||
LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
|
||||
__raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
|
||||
__raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
|
||||
__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
|
||||
LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
|
||||
|
||||
clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
|
||||
clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
|
||||
"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
|
||||
}
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче