Merge remote-tracking branches 'spi/topic/adi-v3', 'spi/topic/atmel', 'spi/topic/cleanup' and 'spi/topic/davinci' into spi-next
This commit is contained in:
Коммит
d1345c524e
|
@ -8,7 +8,8 @@ Required properties:
|
|||
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
|
||||
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
|
||||
- reg: Offset and length of SPI controller register space
|
||||
- num-cs: Number of chip selects
|
||||
- num-cs: Number of chip selects. This includes internal as well as
|
||||
GPIO chip selects.
|
||||
- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
|
||||
IP to the interrupt controller within the SoC. Possible values
|
||||
are 0 and 1. Manual says one of the two possible interrupt
|
||||
|
@ -17,6 +18,12 @@ Required properties:
|
|||
- interrupts: interrupt number mapped to CPU.
|
||||
- clocks: spi clk phandle
|
||||
|
||||
Optional:
|
||||
- cs-gpios: gpio chip selects
|
||||
For example to have 3 internal CS and 2 GPIO CS, user could define
|
||||
cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
|
||||
where first three are internal CS and last two are GPIO CS.
|
||||
|
||||
Example of a NOR flash slave device (n25q032) connected to DaVinci
|
||||
SPI controller device over the SPI bus.
|
||||
|
||||
|
|
|
@ -660,10 +660,9 @@ static int adi_spi_setup(struct spi_device *spi)
|
|||
struct adi_spi3_chip *chip_info = spi->controller_data;
|
||||
|
||||
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
|
||||
if (!chip) {
|
||||
dev_err(&spi->dev, "can not allocate chip data\n");
|
||||
if (!chip)
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
if (chip_info) {
|
||||
if (chip_info->control & ~ctl_reg) {
|
||||
dev_err(&spi->dev,
|
||||
|
|
|
@ -597,21 +597,15 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
|
|||
goto err_exit;
|
||||
|
||||
/* Send both scatterlists */
|
||||
rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
|
||||
&as->dma.sgrx,
|
||||
1,
|
||||
DMA_FROM_DEVICE,
|
||||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK,
|
||||
NULL);
|
||||
rxdesc = dmaengine_prep_slave_sg(rxchan, &as->dma.sgrx, 1,
|
||||
DMA_FROM_DEVICE,
|
||||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
||||
if (!rxdesc)
|
||||
goto err_dma;
|
||||
|
||||
txdesc = txchan->device->device_prep_slave_sg(txchan,
|
||||
&as->dma.sgtx,
|
||||
1,
|
||||
DMA_TO_DEVICE,
|
||||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK,
|
||||
NULL);
|
||||
txdesc = dmaengine_prep_slave_sg(txchan, &as->dma.sgtx, 1,
|
||||
DMA_TO_DEVICE,
|
||||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
||||
if (!txdesc)
|
||||
goto err_dma;
|
||||
|
||||
|
@ -1018,7 +1012,7 @@ static int atmel_spi_setup(struct spi_device *spi)
|
|||
csr |= SPI_BF(DLYBCT, 0);
|
||||
|
||||
/* chipselect must have been muxed as GPIO (e.g. in board setup) */
|
||||
npcs_pin = (unsigned int)spi->controller_data;
|
||||
npcs_pin = (unsigned long)spi->controller_data;
|
||||
|
||||
if (gpio_is_valid(spi->cs_gpio))
|
||||
npcs_pin = spi->cs_gpio;
|
||||
|
@ -1253,7 +1247,7 @@ msg_done:
|
|||
static void atmel_spi_cleanup(struct spi_device *spi)
|
||||
{
|
||||
struct atmel_spi_device *asd = spi->controller_state;
|
||||
unsigned gpio = (unsigned) spi->controller_data;
|
||||
unsigned gpio = (unsigned long) spi->controller_data;
|
||||
|
||||
if (!asd)
|
||||
return;
|
||||
|
|
|
@ -664,7 +664,7 @@ static int __maybe_unused cdns_spi_resume(struct device *dev)
|
|||
static SIMPLE_DEV_PM_OPS(cdns_spi_dev_pm_ops, cdns_spi_suspend,
|
||||
cdns_spi_resume);
|
||||
|
||||
static struct of_device_id cdns_spi_of_match[] = {
|
||||
static const struct of_device_id cdns_spi_of_match[] = {
|
||||
{ .compatible = "xlnx,zynq-spi-r1p6" },
|
||||
{ .compatible = "cdns,spi-r1p6" },
|
||||
{ /* end of table */ }
|
||||
|
|
|
@ -184,8 +184,6 @@ static int spi_clps711x_probe(struct platform_device *pdev)
|
|||
}
|
||||
master->max_speed_hz = clk_get_rate(hw->spi_clk);
|
||||
|
||||
platform_set_drvdata(pdev, master);
|
||||
|
||||
hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3");
|
||||
if (IS_ERR(hw->syscon)) {
|
||||
ret = PTR_ERR(hw->syscon);
|
||||
|
|
|
@ -30,6 +30,7 @@
|
|||
#include <linux/edma.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/spi_bitbang.h>
|
||||
#include <linux/slab.h>
|
||||
|
@ -38,8 +39,6 @@
|
|||
|
||||
#define SPI_NO_RESOURCE ((resource_size_t)-1)
|
||||
|
||||
#define SPI_MAX_CHIPSELECT 2
|
||||
|
||||
#define CS_DEFAULT 0xFF
|
||||
|
||||
#define SPIFMT_PHASE_MASK BIT(16)
|
||||
|
@ -142,7 +141,7 @@ struct davinci_spi {
|
|||
void (*get_rx)(u32 rx_data, struct davinci_spi *);
|
||||
u32 (*get_tx)(struct davinci_spi *);
|
||||
|
||||
u8 bytes_per_word[SPI_MAX_CHIPSELECT];
|
||||
u8 *bytes_per_word;
|
||||
};
|
||||
|
||||
static struct davinci_spi_config davinci_spi_default_cfg;
|
||||
|
@ -213,13 +212,16 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
|
|||
u8 chip_sel = spi->chip_select;
|
||||
u16 spidat1 = CS_DEFAULT;
|
||||
bool gpio_chipsel = false;
|
||||
int gpio;
|
||||
|
||||
dspi = spi_master_get_devdata(spi->master);
|
||||
pdata = &dspi->pdata;
|
||||
|
||||
if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
|
||||
pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
|
||||
if (spi->cs_gpio >= 0) {
|
||||
/* SPI core parse and update master->cs_gpio */
|
||||
gpio_chipsel = true;
|
||||
gpio = spi->cs_gpio;
|
||||
}
|
||||
|
||||
/*
|
||||
* Board specific chip select logic decides the polarity and cs
|
||||
|
@ -227,9 +229,9 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
|
|||
*/
|
||||
if (gpio_chipsel) {
|
||||
if (value == BITBANG_CS_ACTIVE)
|
||||
gpio_set_value(pdata->chip_sel[chip_sel], 0);
|
||||
gpio_set_value(gpio, spi->mode & SPI_CS_HIGH);
|
||||
else
|
||||
gpio_set_value(pdata->chip_sel[chip_sel], 1);
|
||||
gpio_set_value(gpio, !(spi->mode & SPI_CS_HIGH));
|
||||
} else {
|
||||
if (value == BITBANG_CS_ACTIVE) {
|
||||
spidat1 |= SPIDAT1_CSHOLD_MASK;
|
||||
|
@ -392,17 +394,40 @@ static int davinci_spi_setup(struct spi_device *spi)
|
|||
int retval = 0;
|
||||
struct davinci_spi *dspi;
|
||||
struct davinci_spi_platform_data *pdata;
|
||||
struct spi_master *master = spi->master;
|
||||
struct device_node *np = spi->dev.of_node;
|
||||
bool internal_cs = true;
|
||||
unsigned long flags = GPIOF_DIR_OUT;
|
||||
|
||||
dspi = spi_master_get_devdata(spi->master);
|
||||
pdata = &dspi->pdata;
|
||||
|
||||
if (!(spi->mode & SPI_NO_CS)) {
|
||||
if ((pdata->chip_sel == NULL) ||
|
||||
(pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))
|
||||
set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
|
||||
flags |= (spi->mode & SPI_CS_HIGH) ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
|
||||
|
||||
if (!(spi->mode & SPI_NO_CS)) {
|
||||
if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) {
|
||||
retval = gpio_request_one(spi->cs_gpio,
|
||||
flags, dev_name(&spi->dev));
|
||||
internal_cs = false;
|
||||
} else if (pdata->chip_sel &&
|
||||
spi->chip_select < pdata->num_chipselect &&
|
||||
pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) {
|
||||
spi->cs_gpio = pdata->chip_sel[spi->chip_select];
|
||||
retval = gpio_request_one(spi->cs_gpio,
|
||||
flags, dev_name(&spi->dev));
|
||||
internal_cs = false;
|
||||
}
|
||||
}
|
||||
|
||||
if (retval) {
|
||||
dev_err(&spi->dev, "GPIO %d setup failed (%d)\n",
|
||||
spi->cs_gpio, retval);
|
||||
return retval;
|
||||
}
|
||||
|
||||
if (internal_cs)
|
||||
set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
|
||||
|
||||
if (spi->mode & SPI_READY)
|
||||
set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
|
||||
|
||||
|
@ -414,6 +439,12 @@ static int davinci_spi_setup(struct spi_device *spi)
|
|||
return retval;
|
||||
}
|
||||
|
||||
static void davinci_spi_cleanup(struct spi_device *spi)
|
||||
{
|
||||
if (spi->cs_gpio >= 0)
|
||||
gpio_free(spi->cs_gpio);
|
||||
}
|
||||
|
||||
static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
|
||||
{
|
||||
struct device *sdev = dspi->bitbang.master->dev.parent;
|
||||
|
@ -812,6 +843,8 @@ static int spi_davinci_get_pdata(struct platform_device *pdev,
|
|||
|
||||
/*
|
||||
* default num_cs is 1 and all chipsel are internal to the chip
|
||||
* indicated by chip_sel being NULL or cs_gpios being NULL or
|
||||
* set to -ENOENT. num-cs includes internal as well as gpios.
|
||||
* indicated by chip_sel being NULL. GPIO based CS is not
|
||||
* supported yet in DT bindings.
|
||||
*/
|
||||
|
@ -850,7 +883,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
|
|||
struct resource *r;
|
||||
resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
|
||||
resource_size_t dma_tx_chan = SPI_NO_RESOURCE;
|
||||
int i = 0, ret = 0;
|
||||
int ret = 0;
|
||||
u32 spipc0;
|
||||
|
||||
master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
|
||||
|
@ -876,6 +909,14 @@ static int davinci_spi_probe(struct platform_device *pdev)
|
|||
/* pdata in dspi is now updated and point pdata to that */
|
||||
pdata = &dspi->pdata;
|
||||
|
||||
dspi->bytes_per_word = devm_kzalloc(&pdev->dev,
|
||||
sizeof(*dspi->bytes_per_word) *
|
||||
pdata->num_chipselect, GFP_KERNEL);
|
||||
if (dspi->bytes_per_word == NULL) {
|
||||
ret = -ENOMEM;
|
||||
goto free_master;
|
||||
}
|
||||
|
||||
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (r == NULL) {
|
||||
ret = -ENOENT;
|
||||
|
@ -915,6 +956,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
|
|||
master->num_chipselect = pdata->num_chipselect;
|
||||
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
|
||||
master->setup = davinci_spi_setup;
|
||||
master->cleanup = davinci_spi_cleanup;
|
||||
|
||||
dspi->bitbang.chipselect = davinci_spi_chipselect;
|
||||
dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
|
||||
|
@ -962,14 +1004,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
|
|||
spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
|
||||
iowrite32(spipc0, dspi->base + SPIPC0);
|
||||
|
||||
/* initialize chip selects */
|
||||
if (pdata->chip_sel) {
|
||||
for (i = 0; i < pdata->num_chipselect; i++) {
|
||||
if (pdata->chip_sel[i] != SPI_INTERN_CS)
|
||||
gpio_direction_output(pdata->chip_sel[i], 1);
|
||||
}
|
||||
}
|
||||
|
||||
if (pdata->intr_line)
|
||||
iowrite32(SPI_INTLVL_1, dspi->base + SPILVL);
|
||||
else
|
||||
|
|
|
@ -425,8 +425,6 @@ static int falcon_sflash_probe(struct platform_device *pdev)
|
|||
master->unprepare_transfer_hardware = falcon_sflash_unprepare_xfer;
|
||||
master->dev.of_node = pdev->dev.of_node;
|
||||
|
||||
platform_set_drvdata(pdev, priv);
|
||||
|
||||
ret = devm_spi_register_master(&pdev->dev, master);
|
||||
if (ret)
|
||||
spi_master_put(master);
|
||||
|
|
|
@ -58,7 +58,7 @@ static struct fsl_spi_match_data of_fsl_spi_grlib_config = {
|
|||
.type = TYPE_GRLIB,
|
||||
};
|
||||
|
||||
static struct of_device_id of_fsl_spi_match[] = {
|
||||
static const struct of_device_id of_fsl_spi_match[] = {
|
||||
{
|
||||
.compatible = "fsl,spi",
|
||||
.data = &of_fsl_spi_fsl_config,
|
||||
|
|
|
@ -420,8 +420,6 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
|
|||
master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
|
||||
master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
|
||||
|
||||
platform_set_drvdata(pdev, master);
|
||||
|
||||
spi100k = spi_master_get_devdata(master);
|
||||
|
||||
/*
|
||||
|
|
|
@ -304,7 +304,7 @@ static int hspi_remove(struct platform_device *pdev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static struct of_device_id hspi_of_match[] = {
|
||||
static const struct of_device_id hspi_of_match[] = {
|
||||
{ .compatible = "renesas,hspi", },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
|
|
|
@ -680,8 +680,6 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
|
|||
|
||||
p = spi_master_get_devdata(master);
|
||||
|
||||
platform_set_drvdata(pdev, p);
|
||||
|
||||
of_id = of_match_device(sh_msiof_match, &pdev->dev);
|
||||
if (of_id) {
|
||||
p->chipdata = of_id->data;
|
||||
|
|
Загрузка…
Ссылка в новой задаче