drm: mali-dp: Fix smart layer not going to composition

Use rectangle 1 as a generic plane. Existing code already sets the smart
layer bounding box size + offset. The rectangles' offsets are relative
to the bounding box, so there is no need to set R1's offset (reset value
is 0), just its size which is the same as the bounding box.

Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drivers/gpu/drm/arm/malidp_hw.c

@@ -83,7 +83,7 @@ static const struct malidp_layer malidp550_layers[] = {
 	{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE, MALIDP_DE_LV_STRIDE0 },
 	{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE, MALIDP_DE_LG_STRIDE },
 	{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE, MALIDP_DE_LV_STRIDE0 },
-	{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, 0 },
+	{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, MALIDP550_DE_LS_R1_STRIDE },
 };
 
 #define MALIDP_DE_DEFAULT_PREFETCH_START	5

drivers/gpu/drm/arm/malidp_planes.c

@@ -37,6 +37,8 @@
 #define   LAYER_V_VAL(x)		(((x) & 0x1fff) << 16)
 #define MALIDP_LAYER_COMP_SIZE		0x010
 #define MALIDP_LAYER_OFFSET		0x014
+#define MALIDP550_LS_ENABLE		0x01c
+#define MALIDP550_LS_R1_IN_SIZE		0x020
 
 /*
  * This 4-entry look-up-table is used to determine the full 8-bit alpha value
@@ -242,6 +244,11 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 			LAYER_V_VAL(plane->state->crtc_y),
 			mp->layer->base + MALIDP_LAYER_OFFSET);
 
+	if (mp->layer->id == DE_SMART)
+		malidp_hw_write(mp->hwdev,
+				LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h),
+				mp->layer->base + MALIDP550_LS_R1_IN_SIZE);
+
 	/* first clear the rotation bits */
 	val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL);
 	val &= ~LAYER_ROT_MASK;
@@ -330,9 +337,16 @@ int malidp_de_planes_init(struct drm_device *drm)
 		plane->hwdev = malidp->dev;
 		plane->layer = &map->layers[i];
 
-		/* Skip the features which the SMART layer doesn't have */
-		if (id == DE_SMART)
+		if (id == DE_SMART) {
+			/*
+			 * Enable the first rectangle in the SMART layer to be
+			 * able to use it as a drm plane.
+			 */
+			malidp_hw_write(malidp->dev, 1,
+					plane->layer->base + MALIDP550_LS_ENABLE);
+			/* Skip the features which the SMART layer doesn't have. */
 			continue;
+		}
 
 		drm_plane_create_rotation_property(&plane->base, DRM_ROTATE_0, flags);
 		malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT,

drivers/gpu/drm/arm/malidp_regs.h

@@ -84,6 +84,7 @@
 /* Stride register offsets relative to Lx_BASE */
 #define MALIDP_DE_LG_STRIDE		0x18
 #define MALIDP_DE_LV_STRIDE0		0x18
+#define MALIDP550_DE_LS_R1_STRIDE	0x28
 
 /* macros to set values into registers */
 #define MALIDP_DE_H_FRONTPORCH(x)	(((x) & 0xfff) << 0)