Merge branch 'master' into upstream

2006-06-08 15:24:46 -04:00 · 2006-06-08 15:24:46 -04:00 · d15a88fc21
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@ -214,12 +214,13 @@ hardware.
 	The interaction of the iflag bits is as follows (parity error
 	given as an example):
 	Parity error	INPCK	IGNPAR
-	None		n/a	n/a	character received
-	Yes		n/a	0	character discarded
-	Yes		0	1	character received, marked as
+	n/a		0	n/a	character received, marked as
 					TTY_NORMAL
-	Yes		1	1	character received, marked as
+	None		1	n/a	character received, marked as
+					TTY_NORMAL
+	Yes		1	0	character received, marked as
 					TTY_PARITY
+	Yes		1	1	character discarded

 	Other flags may be used (eg, xon/xoff characters) if your
 	hardware supports hardware "soft" flow control.
--- a/17
+++ b/17
@ -568,6 +568,18 @@ L:	linuxppc-dev@ozlabs.org
 W:	http://www.penguinppc.org/ppc64/
 S:	Supported

+BROADCOM BNX2 GIGABIT ETHERNET DRIVER
+P:	Michael Chan
+M:	mchan@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
+BROADCOM TG3 GIGABIT ETHERNET DRIVER
+P:	Michael Chan
+M:	mchan@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
 BTTV VIDEO4LINUX DRIVER
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org
@ -1883,6 +1895,11 @@ L:	linux-kernel@vger.kernel.org
 W:	http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
 S:	Maintained

+MULTIMEDIA CARD SUBSYSTEM
+P:	Russell King
+M:	rmk+mmc@arm.linux.org.uk
+S:	Maintained
+
 MULTISOUND SOUND DRIVER
 P:	Andrew Veliath
 M:	andrewtv@usa.net
--- a/4
+++ b/4
@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 17
-EXTRAVERSION =-rc5
-NAME=Lordi Rules
+EXTRAVERSION =-rc6
+NAME=Crazed Snow-Weasel

 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
--- a/arch/alpha/kernel/alpha_ksyms.c
+++ b/arch/alpha/kernel/alpha_ksyms.c
@ -182,7 +182,6 @@ EXPORT_SYMBOL(smp_num_cpus);
 EXPORT_SYMBOL(smp_call_function);
 EXPORT_SYMBOL(smp_call_function_on_cpu);
 EXPORT_SYMBOL(_atomic_dec_and_lock);
-EXPORT_SYMBOL(cpu_present_mask);
 #endif /* CONFIG_SMP */

 /*
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@ -94,7 +94,7 @@ common_shutdown_1(void *generic_ptr)
 	if (cpuid != boot_cpuid) {
 		flags |= 0x00040000UL; /* "remain halted" */
 		*pflags = flags;
-		clear_bit(cpuid, &cpu_present_mask);
+		cpu_clear(cpuid, cpu_present_map);
 		halt();
 	}
 #endif
@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)

 #ifdef CONFIG_SMP
 	/* Wait for the secondaries to halt. */
-	cpu_clear(boot_cpuid, cpu_possible_map);
-	while (cpus_weight(cpu_possible_map))
+	cpu_clear(boot_cpuid, cpu_present_map);
+	while (cpus_weight(cpu_present_map))
 		barrier();
 #endif

--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@ -68,7 +68,6 @@ enum ipi_message_type {
 static int smp_secondary_alive __initdata = 0;

 /* Which cpus ids came online.  */
-cpumask_t cpu_present_mask;
 cpumask_t cpu_online_map;

 EXPORT_SYMBOL(cpu_online_map);
@ -439,7 +438,7 @@ setup_smp(void)
 			if ((cpu->flags & 0x1cc) == 0x1cc) {
 				smp_num_probed++;
 				/* Assume here that "whami" == index */
-				cpu_set(i, cpu_present_mask);
+				cpu_set(i, cpu_present_map);
 				cpu->pal_revision = boot_cpu_palrev;
 			}

@ -450,11 +449,10 @@ setup_smp(void)
 		}
 	} else {
 		smp_num_probed = 1;
-		cpu_set(boot_cpuid, cpu_present_mask);
 	}

-	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
-	       smp_num_probed, cpu_possible_map.bits[0]);
+	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n",
+	       smp_num_probed, cpu_present_map.bits[0]);
 }

 /*
@ -473,7 +471,7 @@ smp_prepare_cpus(unsigned int max_cpus)

 	/* Nothing to do on a UP box, or when told not to.  */
 	if (smp_num_probed == 1 || max_cpus == 0) {
-		cpu_present_mask = cpumask_of_cpu(boot_cpuid);
+		cpu_present_map = cpumask_of_cpu(boot_cpuid);
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		return;
 	}
@ -486,10 +484,6 @@ smp_prepare_cpus(unsigned int max_cpus)
 void __devinit
 smp_prepare_boot_cpu(void)
 {
-	/*
-	 * Mark the boot cpu (current cpu) as online
-	 */ 
-	cpu_set(smp_processor_id(), cpu_online_map);
 }

 int __devinit
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@ -66,7 +66,7 @@ titan_update_irq_hw(unsigned long mask)
 	register int bcpu = boot_cpuid;

 #ifdef CONFIG_SMP
-	cpumask_t cpm = cpu_present_mask;
+	cpumask_t cpm = cpu_present_map;
 	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
 	unsigned long mask0, mask1, mask2, mask3, dummy;

--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@ -101,7 +101,7 @@ config DEBUG_S3C2410_UART
 	help
 	  Choice for UART for kernel low-level using S3C2410 UARTS,
 	  should be between zero and two. The port must have been
-	  initalised by the boot-loader before use.
+	  initialised by the boot-loader before use.

 	  The uncompressor code port configuration is now handled
 	  by CONFIG_S3C2410_LOWLEVEL_UART_PORT.
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@ -178,8 +178,12 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)

 static void ixp23xx_irq_mask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;

+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg &= ~(1 << (irq % 32));
 }

@ -199,17 +203,25 @@ static void ixp23xx_irq_ack(unsigned int irq)
 */
 static void ixp23xx_irq_level_unmask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;

 	ixp23xx_irq_ack(irq);

+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg |= (1 << (irq % 32));
 }

 static void ixp23xx_irq_edge_unmask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;

+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg |= (1 << (irq % 32));
 }

--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@ -141,7 +141,7 @@ config IXP4XX_INDIRECT_PCI
          2) If > 64MB of memory space is required, the IXP4xx can be 
 	     configured to use indirect registers to access PCI This allows 
 	     for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-	     The disadvantadge of this is that every PCI access requires 
+	     The disadvantage of this is that every PCI access requires 
 	     three local register accesses plus a spinlock, but in some 
 	     cases the performance hit is acceptable. In addition, you cannot 
 	     mmap() PCI devices in this case due to the indirect nature
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@ -493,6 +493,7 @@ static void __init mainstone_map_io(void)
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
 	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
 	.init_irq	= mainstone_init_irq,
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@ -170,7 +170,7 @@ config S3C2410_PM_DEBUG
 	depends on ARCH_S3C2410 && PM
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.

 config S3C2410_PM_CHECK
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@ -376,7 +376,7 @@ void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}

-	if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
+	if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			if (mem_types[i].prot_l1)
 				mem_types[i].prot_l1 |= PMD_BIT4;
@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode)
 		pgd = init_mm.pgd;

 	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
 		base_pmdval |= PMD_BIT4;

 	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@ -427,12 +427,13 @@ __xsc3_setup:
 #endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	bic	r0, r0, #0x0002			@ .... .... .... ..A.
 	orr	r0, r0, #0x0005			@ .... .... .... .C.M
 #if BTB_ENABLE
+	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	orr	r0, r0, #0x3900			@ ..VI Z..S .... ....
 #else
+	bic	r0, r0, #0x0a00			@ .... Z.R. .... ....
 	orr	r0, r0, #0x3100			@ ..VI ...S .... ....
 #endif
 #if L2_CACHE_ENABLE
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@ -1066,14 +1066,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
-	{
-	 .callback = disable_acpi_pci,
-	 .ident = "HP xw9300",
-	 .matches = {
-		    DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		    DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
-		    },
-	},
 	{}
 };

--- a/arch/i386/mach-generic/probe.c
+++ b/arch/i386/mach-generic/probe.c
@ -93,9 +93,11 @@ int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 
@ -107,9 +109,11 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@ -13,7 +13,7 @@ choice
 	default SGI_IP22

 config MIPS_MTX1
-	bool "Support for 4G Systems MTX-1 board"
+	bool "4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SOC_AU1500
@ -120,7 +120,7 @@ config MIPS_MIRAGE
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config MIPS_COBALT
-	bool "Support for Cobalt Server"
+	bool "Cobalt Server"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select I8259
@ -132,7 +132,7 @@ config MIPS_COBALT
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config MACH_DECSTATION
-	bool "Support for DECstations"
+	bool "DECstations"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select EARLY_PRINTK
@ -158,7 +158,7 @@ config MACH_DECSTATION
 	  otherwise choose R3000.

 config MIPS_EV64120
-	bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+	bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@ -175,7 +175,7 @@ config MIPS_EV64120
 	  kernel for this platform.

 config MIPS_EV96100
-	bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+	bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@ -195,7 +195,7 @@ config MIPS_EV96100
 	  here if you wish to build a kernel for this platform.

 config MIPS_IVR
-	bool "Support for Globespan IVR board"
+	bool "Globespan IVR board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select ITE_BOARD_GEN
@ -211,7 +211,7 @@ config MIPS_IVR
 	  build a kernel for this platform.

 config MIPS_ITE8172
-	bool "Support for ITE 8172G board"
+	bool "ITE 8172G board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select ITE_BOARD_GEN
@ -228,7 +228,7 @@ config MIPS_ITE8172
 	  a kernel for this platform.

 config MACH_JAZZ
-	bool "Support for the Jazz family of machines"
+	bool "Jazz family of machines"
 	select ARC
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
@ -246,7 +246,7 @@ config MACH_JAZZ
 	 Olivetti M700-10 workstations.

 config LASAT
-	bool "Support for LASAT Networks platforms"
+	bool "LASAT Networks platforms"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_GT64120
@ -258,7 +258,7 @@ config LASAT
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config MIPS_ATLAS
-	bool "Support for MIPS Atlas board"
+	bool "MIPS Atlas board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select IRQ_CPU
@ -283,7 +283,7 @@ config MIPS_ATLAS
 	  board.

 config MIPS_MALTA
-	bool "Support for MIPS Malta board"
+	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select HAVE_STD_PC_SERIAL_PORT
@ -311,7 +311,7 @@ config MIPS_MALTA
 	  board.

 config MIPS_SEAD
-	bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+	bool "MIPS SEAD board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select IRQ_CPU
 	select DMA_NONCOHERENT
@ -328,7 +328,7 @@ config MIPS_SEAD
 	  board.

 config MIPS_SIM
-	bool 'Support for MIPS simulator (MIPSsim)'
+	bool 'MIPS simulator (MIPSsim)'
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
@ -341,7 +341,7 @@ config MIPS_SIM
 	  emulator.

 config MOMENCO_JAGUAR_ATX
-	bool "Support for Momentum Jaguar board"
+	bool "Momentum Jaguar board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX
 	  Momentum Computer <http://www.momenco.com/>.

 config MOMENCO_OCELOT
-	bool "Support for Momentum Ocelot board"
+	bool "Momentum Ocelot board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@ -378,7 +378,7 @@ config MOMENCO_OCELOT
 	  Momentum Computer <http://www.momenco.com/>.

 config MOMENCO_OCELOT_3
-	bool "Support for Momentum Ocelot-3 board"
+	bool "Momentum Ocelot-3 board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3
 	  PMC-Sierra Rm79000 core.

 config MOMENCO_OCELOT_C
-	bool "Support for Momentum Ocelot-C board"
+	bool "Momentum Ocelot-C board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C
 	  Momentum Computer <http://www.momenco.com/>.

 config MOMENCO_OCELOT_G
-	bool "Support for Momentum Ocelot-G board"
+	bool "Momentum Ocelot-G board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G
 	  Momentum Computer <http://www.momenco.com/>.

 config MIPS_XXS1500
-	bool "Support for MyCable XXS1500 board"
+	bool "MyCable XXS1500 board"
 	select DMA_NONCOHERENT
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config PNX8550_V2PCI
-	bool "Support for Philips PNX8550 based Viper2-PCI board"
+	bool "Philips PNX8550 based Viper2-PCI board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config PNX8550_JBS
-	bool "Support for Philips PNX8550 based JBS board"
+	bool "Philips PNX8550 based JBS board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config DDB5074
-	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+	bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
@ -465,7 +465,7 @@ config DDB5074
 	  evaluation board.

 config DDB5476
-	bool "Support for NEC DDB Vrc-5476"
+	bool "NEC DDB Vrc-5476"
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HAVE_STD_PC_SERIAL_PORT
@ -486,7 +486,7 @@ config DDB5476
 	  IDE controller, PS2 keyboard, PS2 mouse, etc.

 config DDB5477
-	bool "Support for NEC DDB Vrc-5477"
+	bool "NEC DDB Vrc-5477"
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@ -504,13 +504,13 @@ config DDB5477
 	  ether port USB, AC97, PCI, etc.

 config MACH_VR41XX
-	bool "Support for NEC VR4100 series based machines"
+	bool "NEC VR41XX-based machines"
 	select SYS_HAS_CPU_VR41XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL

 config PMC_YOSEMITE
-	bool "Support for PMC-Sierra Yosemite eval board"
+	bool "PMC-Sierra Yosemite eval board"
 	select DMA_COHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@ -527,7 +527,7 @@ config PMC_YOSEMITE
 	  manufactured by PMC-Sierra.

 config QEMU
-	bool "Support for Qemu"
+	bool "Qemu"
 	select DMA_COHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_STD_PC_SERIAL_PORT
@ -547,7 +547,7 @@ config QEMU
 	  can be found at http://www.linux-mips.org/wiki/Qemu.

 config SGI_IP22
-	bool "Support for SGI IP22 (Indy/Indigo2)"
+	bool "SGI IP22 (Indy/Indigo2)"
 	select ARC
 	select ARC32
 	select BOOT_ELF32
@ -567,7 +567,7 @@ config SGI_IP22
 	  that runs on these, say Y here.

 config SGI_IP27
-	bool "Support for SGI IP27 (Origin200/2000)"
+	bool "SGI IP27 (Origin200/2000)"
 	select ARC
 	select ARC64
 	select BOOT_ELF64
@ -583,7 +583,7 @@ config SGI_IP27
 	  here.

 config SGI_IP32
-	bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+	bool "SGI IP32 (O2) (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select ARC
 	select ARC32
@ -604,7 +604,7 @@ config SGI_IP32
 	  If you want this kernel to run on SGI O2 workstation, say Y here.

 config SIBYTE_BIGSUR
-	bool "Support for Sibyte BCM91480B-BigSur"
+	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select PCI_DOMAINS
@ -615,7 +615,7 @@ config SIBYTE_BIGSUR
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SIBYTE_SWARM
-	bool "Support for Sibyte BCM91250A-SWARM"
+	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select SIBYTE_SB1250
@ -626,7 +626,7 @@ config SIBYTE_SWARM
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SIBYTE_SENTOSA
-	bool "Support for Sibyte BCM91250E-Sentosa"
+	bool "Sibyte BCM91250E-Sentosa"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@ -637,7 +637,7 @@ config SIBYTE_SENTOSA
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SIBYTE_RHONE
-	bool "Support for Sibyte BCM91125E-Rhone"
+	bool "Sibyte BCM91125E-Rhone"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@ -648,7 +648,7 @@ config SIBYTE_RHONE
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SIBYTE_CARMEL
-	bool "Support for Sibyte BCM91120x-Carmel"
+	bool "Sibyte BCM91120x-Carmel"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@ -659,7 +659,7 @@ config SIBYTE_CARMEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SIBYTE_PTSWARM
-	bool "Support for Sibyte BCM91250PT-PTSWARM"
+	bool "Sibyte BCM91250PT-PTSWARM"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@ -671,7 +671,7 @@ config SIBYTE_PTSWARM
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SIBYTE_LITTLESUR
-	bool "Support for Sibyte BCM91250C2-LittleSur"
+	bool "Sibyte BCM91250C2-LittleSur"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SIBYTE_CRHINE
-	bool "Support for Sibyte BCM91120C-CRhine"
+	bool "Sibyte BCM91120C-CRhine"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@ -694,7 +694,7 @@ config SIBYTE_CRHINE
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SIBYTE_CRHONE
-	bool "Support for Sibyte BCM91125C-CRhone"
+	bool "Sibyte BCM91125C-CRhone"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@ -706,7 +706,7 @@ config SIBYTE_CRHONE
 	select SYS_SUPPORTS_LITTLE_ENDIAN

 config SNI_RM200_PCI
-	bool "Support for SNI RM200 PCI"
+	bool "SNI RM200 PCI"
 	select ARC
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
@ -732,7 +732,7 @@ config SNI_RM200_PCI
 	  support this machine type.

 config TOSHIBA_JMR3927
-	bool "Support for Toshiba JMR-TX3927 board"
+	bool "Toshiba JMR-TX3927 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_TX3927
@ -743,7 +743,7 @@ config TOSHIBA_JMR3927
 	select TOSHIBA_BOARDS

 config TOSHIBA_RBTX4927
-	bool "Support for Toshiba TBTX49[23]7 board"
+	bool "Toshiba TBTX49[23]7 board"
 	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927
 	  support this machine type

 config TOSHIBA_RBTX4938
-	bool "Support for Toshiba RBTX4938 board"
+	bool "Toshiba RBTX4938 board"
 	select HAVE_STD_PC_SERIAL_PORT
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
@ -1411,13 +1411,12 @@ config PAGE_SIZE_8KB

 config PAGE_SIZE_16KB
 	bool "16kB"
-	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
+	depends on !CPU_R3000 && !CPU_TX39XX
 	help
 	  Using 16kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
-	  all non-R3000 family processor.  Not that at the time of this
-	  writing this option is still high experimental; there are also
-	  issues with compatibility of user applications.
+	  all non-R3000 family processors.  Note that you will need a suitable
+	  Linux distribution to support this.

 config PAGE_SIZE_64KB
 	bool "64kB"
@ -1426,8 +1425,7 @@ config PAGE_SIZE_64KB
 	  Using 64kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
 	  all non-R3000 family processor.  Not that at the time of this
-	  writing this option is still high experimental; there are also
-	  issues with compatibility of user applications.
+	  writing this option is still high experimental.

 endchoice

--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@ -68,6 +68,7 @@

 extern void set_debug_traps(void);
 extern irq_cpustat_t irq_stat [NR_CPUS];
+extern void mips_timer_interrupt(struct pt_regs *regs);

 static void setup_local_irq(unsigned int irq, int type, int int_req);
 static unsigned int startup_irq(unsigned int irq);
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@ -1,10 +1,9 @@
 /*
 *
 * BRIEF MODULE DESCRIPTION
- *    PROM library initialisation code, assuming a version of
- *    pmon is the boot code.
+ *    PROM library initialisation code, assuming YAMON is the boot loader.
 *
- * Copyright 2000,2001 MontaVista Software Inc.
+ * Copyright 2000, 2001, 2006 MontaVista Software Inc.
 * Author: MontaVista Software, Inc.
 *         	ppopov@mvista.com or source@mvista.com
 *
@ -49,9 +48,9 @@ extern char **prom_argv, **prom_envp;

 typedef struct
 {
-    char *name;
-/*    char *val; */
-}t_env_var;
+	char *name;
+	char *val;
+} t_env_var;


 char * prom_getcmdline(void)
@ -85,21 +84,16 @@ char *prom_getenv(char *envname)
 {
 	/*
 	 * Return a pointer to the given environment variable.
-	 * Environment variables are stored in the form of "memsize=64".
 	 */

 	t_env_var *env = (t_env_var *)prom_envp;
-	int i;

-	i = strlen(envname);
-
-	while(env->name) {
-		if(strncmp(envname, env->name, i) == 0) {
-			return(env->name + strlen(envname) + 1);
-		}
+	while (env->name) {
+		if (strcmp(envname, env->name) == 0)
+			return env->val;
 		env++;
 	}
-	return(NULL);
+	return NULL;
 }

 inline unsigned char str2hexnum(unsigned char c)
--- a/arch/mips/au1000/common/sleeper.S
+++ b/arch/mips/au1000/common/sleeper.S
@ -112,6 +112,11 @@ sdsleep:
 	mtc0	k0, CP0_PAGEMASK
 	lw	k0, 0x14(sp)
 	mtc0	k0, CP0_CONFIG
+
+	/* We need to catch the ealry Alchemy SOCs with
+	 * the write-only Config[OD] bit and set it back to one...
+	 */
+	jal	au1x00_fixup_config_od
 	lw	$1, PT_R1(sp)
 	lw	$2, PT_R2(sp)
 	lw	$3, PT_R3(sp)
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@ -116,6 +116,7 @@ void mips_timer_interrupt(struct pt_regs *regs)

 null:
 	ack_r4ktimer(0);
+	irq_exit();
 }

 #ifdef CONFIG_PM
--- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c
+++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
        /* disable interrupts */
        UART16550_WRITE(OFS_INTR_ENABLE, 0);

-        /* set up buad rate */
+        /* set up baud rate */
        {
                uint32 divisor;

--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
        /* disable interrupts */
        UART16550_WRITE(OFS_INTR_ENABLE, 0);

-        /* set up buad rate */
+        /* set up baud rate */
        {
                uint32 divisor;

--- a/arch/mips/gt64120/ev64120/serialGT.c
+++ b/arch/mips/gt64120/ev64120/serialGT.c
@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud)
 #else
 	/*
 	 * Note: Set baud rate, hardcoded here for rate of 115200
-	 * since became unsure of above "buad rate" algorithm (??).
+	 * since became unsure of above "baud rate" algorithm (??).
 	 */
 	outreg(channel, LCR, 0x83);
 	outreg(channel, DLM, 0x00);	// See note above
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);

-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;

--- a/arch/mips/ite-boards/generic/dbg_io.c
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);

-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;

--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@ -272,8 +272,8 @@ void output_sc_defines(void)
 	text("/* Linux sigcontext offsets. */");
 	offset("#define SC_REGS       ", struct sigcontext, sc_regs);
 	offset("#define SC_FPREGS     ", struct sigcontext, sc_fpregs);
-	offset("#define SC_MDHI       ", struct sigcontext, sc_hi);
-	offset("#define SC_MDLO       ", struct sigcontext, sc_lo);
+	offset("#define SC_MDHI       ", struct sigcontext, sc_mdhi);
+	offset("#define SC_MDLO       ", struct sigcontext, sc_mdlo);
 	offset("#define SC_PC         ", struct sigcontext, sc_pc);
 	offset("#define SC_FPC_CSR    ", struct sigcontext, sc_fpc_csr);
 	linefeed;
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@ -206,7 +206,7 @@ static inline void check_daddi(void)
 		"daddi	%0, %1, %3\n\t"
 		".set	pop"
 		: "=r" (v), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 	set_except_vector(12, handler);
 	local_irq_restore(flags);

@ -224,7 +224,7 @@ static inline void check_daddi(void)
 		"dsrl	%1, %1, 1\n\t"
 		"daddi	%0, %1, %3"
 		: "=r" (v), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 	set_except_vector(12, handler);
 	local_irq_restore(flags);

@ -280,7 +280,7 @@ static inline void check_daddiu(void)
 		"daddu	%1, %2\n\t"
 		".set	pop"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));

 	if (v == w) {
 		printk("no.\n");
@ -296,7 +296,7 @@ static inline void check_daddiu(void)
 		"addiu	%1, $0, %4\n\t"
 		"daddu	%1, %2"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));

 	if (v == w) {
 		printk("yes.\n");
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@ -121,6 +121,7 @@ static inline void check_wait(void)
 	case CPU_24K:
 	case CPU_25KF:
 	case CPU_34K:
+	case CPU_74K:
 	case CPU_PR4450:
 		cpu_wait = r4k_wait;
 		printk(" available.\n");
@ -432,6 +433,15 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 		             MIPS_CPU_LLSC;
 		c->tlbsize = 64;
 		break;
+	case PRID_IMP_R14000:
+		c->cputype = CPU_R14000;
+		c->isa_level = MIPS_CPU_ISA_IV;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+		             MIPS_CPU_LLSC;
+		c->tlbsize = 64;
+		break;
 	}
 }

@ -593,6 +603,9 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 	case PRID_IMP_34K:
 		c->cputype = CPU_34K;
 		break;
+	case PRID_IMP_74K:
+		c->cputype = CPU_74K;
+		break;
 	}
 }

@ -642,7 +655,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
 		/* FPU in pass1 is known to have issues. */
-		if ((c->processor_id & 0xff) < 0x20)
+		if ((c->processor_id & 0xff) < 0x02)
 			c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 		break;
 	case PRID_IMP_SB1A:
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@ -101,7 +101,7 @@ FEXPORT(restore_all)			# restore full frame
 	EMT
 1:
 	mfc0	v1, CP0_TCSTATUS
-	/* We set IXMT above, XOR should cler it here */
+	/* We set IXMT above, XOR should clear it here */
 	xori	v1, v1, TCSTATUS_IXMT
 	or	v1, v0, v1
 	mtc0	v1, CP0_TCSTATUS
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@ -54,9 +54,11 @@
 		 */
 		mfc0	k0, CP0_CAUSE
 		andi	k0, k0, 0x7c
-		add	k1, k1, k0
-		PTR_L	k0, saved_vectors(k1)
-		jr	k0
+#ifdef CONFIG_64BIT
+		dsll	k0, k0, 1
+#endif
+		PTR_L	k1, saved_vectors(k0)
+		jr	k1
 		nop
 1:
 		move	k0, sp
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@ -288,6 +288,9 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
 		if (!sym->st_value) {
+			/* Ignore unresolved weak symbol */
+			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+				continue;
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",
 			       me->name, strtab + sym->st_name);
 			return -ENOENT;
@ -325,6 +328,9 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
 		if (!sym->st_value) {
+			/* Ignore unresolved weak symbol */
+			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+				continue;
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",
 			       me->name, strtab + sym->st_name);
 			return -ENOENT;
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@ -42,6 +42,7 @@ static const char *cpu_name[] = {
 	[CPU_R8000]	= "R8000",
 	[CPU_R10000]	= "R10000",
 	[CPU_R12000]	= "R12000",
+	[CPU_R14000]	= "R14000",
 	[CPU_R4300]	= "R4300",
 	[CPU_R4650]	= "R4650",
 	[CPU_R4700]	= "R4700",
@ -74,6 +75,7 @@ static const char *cpu_name[] = {
 	[CPU_24K]	= "MIPS 24K",
 	[CPU_25KF]	= "MIPS 25Kf",
 	[CPU_34K]	= "MIPS 34K",
+	[CPU_74K]	= "MIPS 74K",
 	[CPU_VR4111]	= "NEC VR4111",
 	[CPU_VR4121]	= "NEC VR4121",
 	[CPU_VR4122]	= "NEC VR4122",
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@ -209,7 +209,7 @@ sys_call_table:
 	PTR	sys_fork
 	PTR	sys_read
 	PTR	sys_write
-	PTR	sys_open			/* 4005 */
+	PTR	compat_sys_open			/* 4005 */
 	PTR	sys_close
 	PTR	sys_waitpid
 	PTR	sys_creat
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@ -246,7 +246,7 @@ static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_en
 #ifdef CONFIG_64BIT
 	/* HACK: Guess if the sign extension was forgotten */
 	if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
-		start |= 0xffffffff00000000;
+		start |= 0xffffffff00000000UL;
 #endif

 	end = start + size;
@ -355,8 +355,6 @@ static inline void bootmem_init(void)
 	}
 #endif

-	memory_present(0, first_usable_pfn, max_low_pfn);
-
 	/* Initialize the boot-time allocator with low memory only.  */
 	bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);

@ -410,6 +408,7 @@ static inline void bootmem_init(void)

 		/* Register lowmem ranges */
 		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+		memory_present(0, curr_pfn, curr_pfn + size - 1);
 	}

 	/* Reserve the bootmap memory.  */
@ -419,17 +418,20 @@ static inline void bootmem_init(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 	initrd_below_start_ok = 1;
 	if (initrd_start) {
-		unsigned long initrd_size = ((unsigned char *)initrd_end) - ((unsigned char *)initrd_start);
+		unsigned long initrd_size = ((unsigned char *)initrd_end) -
+			((unsigned char *)initrd_start);
+		const int width = sizeof(long) * 2;
+
 		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
 		       (void *)initrd_start, initrd_size);

 		if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
 			printk("initrd extends beyond end of memory "
 			       "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
-			       sizeof(long) * 2,
-			       (unsigned long long)CPHYSADDR(initrd_end),
-			       sizeof(long) * 2,
-			       (unsigned long long)PFN_PHYS(max_low_pfn));
+			       width,
+			       (unsigned long long) CPHYSADDR(initrd_end),
+			       width,
+			       (unsigned long long) PFN_PHYS(max_low_pfn));
 			initrd_start = initrd_end = 0;
 			initrd_reserve_bootmem = 0;
 		}
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@ -31,7 +31,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	save_gp_reg(31);
 #undef save_gp_reg

-#ifdef CONFIG_32BIT
 	err |= __put_user(regs->hi, &sc->sc_mdhi);
 	err |= __put_user(regs->lo, &sc->sc_mdlo);
 	if (cpu_has_dsp) {
@ -43,20 +42,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 		err |= __put_user(mflo3(), &sc->sc_lo3);
 		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
 	}
-#endif
-#ifdef CONFIG_64BIT
-	err |= __put_user(regs->hi, &sc->sc_hi[0]);
-	err |= __put_user(regs->lo, &sc->sc_lo[0]);
-	if (cpu_has_dsp) {
-		err |= __put_user(mfhi1(), &sc->sc_hi[1]);
-		err |= __put_user(mflo1(), &sc->sc_lo[1]);
-		err |= __put_user(mfhi2(), &sc->sc_hi[2]);
-		err |= __put_user(mflo2(), &sc->sc_lo[2]);
-		err |= __put_user(mfhi3(), &sc->sc_hi[3]);
-		err |= __put_user(mflo3(), &sc->sc_lo[3]);
-		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
-	}
-#endif

 	err |= __put_user(!!used_math(), &sc->sc_used_math);

@ -92,7 +77,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;

 	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
-#ifdef CONFIG_32BIT
 	err |= __get_user(regs->hi, &sc->sc_mdhi);
 	err |= __get_user(regs->lo, &sc->sc_mdlo);
 	if (cpu_has_dsp) {
@ -104,20 +88,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
 		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
 	}
-#endif
-#ifdef CONFIG_64BIT
-	err |= __get_user(regs->hi, &sc->sc_hi[0]);
-	err |= __get_user(regs->lo, &sc->sc_lo[0]);
-	if (cpu_has_dsp) {
-		err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
-		err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
-		err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
-		err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
-		err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
-		err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
-		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
-	}
-#endif

 #define restore_gp_reg(i) do {						\
 	err |= __get_user(regs->regs[i], &sc->sc_regs[i]);		\
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@ -247,6 +247,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	current_thread_info()->cpu = 0;
 	smp_tune_scheduling();
 	plat_prepare_cpus(max_cpus);
+#ifndef CONFIG_HOTPLUG_CPU
+	cpu_present_map = cpu_possible_map;
+#endif
 }

 /* preload SMP state for boot cpu */
@ -442,7 +445,7 @@ static int __init topology_init(void)
 	int cpu;
 	int ret;

-	for_each_cpu(cpu) {
+	for_each_present_cpu(cpu) {
 		ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
 		if (ret)
 			printk(KERN_WARNING "topology_init: register_cpu %d "
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@ -276,31 +276,9 @@ void sys_set_thread_area(unsigned long addr)

 asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 {
-	int	tmp, len;
-	char	__user *name;
+	int	tmp;

 	switch(cmd) {
-	case SETNAME: {
-		char nodename[__NEW_UTS_LEN + 1];
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EPERM;
-
-		name = (char __user *) arg1;
-
-		len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
-		if (len < 0)
-			return -EFAULT;
-
-		down_write(&uts_sem);
-		strncpy(system_utsname.nodename, nodename, len);
-		nodename[__NEW_UTS_LEN] = '\0';
-		strlcpy(system_utsname.nodename, nodename,
-		        sizeof(system_utsname.nodename));
-		up_write(&uts_sem);
-		return 0;
-	}
-
 	case MIPS_ATOMIC_SET:
 		printk(KERN_CRIT "How did I get here?\n");
 		return -EINVAL;
@ -313,9 +291,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 	case FLUSH_CACHE:
 		__flush_cache_all();
 		return 0;
-
-	case MIPS_RDNVRAM:
-		return -EIO;
 	}

 	return -EINVAL;
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@ -819,15 +819,30 @@ asmlinkage void do_watch(struct pt_regs *regs)

 asmlinkage void do_mcheck(struct pt_regs *regs)
 {
+	const int field = 2 * sizeof(unsigned long);
+	int multi_match = regs->cp0_status & ST0_TS;
+
 	show_regs(regs);
-	dump_tlb_all();
+
+	if (multi_match) {
+		printk("Index   : %0x\n", read_c0_index());
+		printk("Pagemask: %0x\n", read_c0_pagemask());
+		printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
+		printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
+		printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
+		printk("\n");
+		dump_tlb_all();
+	}
+
+	show_code((unsigned int *) regs->cp0_epc);
+
 	/*
 	 * Some chips may have other causes of machine check (e.g. SB1
 	 * graduation timer)
 	 */
 	panic("Caught Machine Check exception - %scaused by multiple "
 	      "matching entries in the TLB.",
-	      (regs->cp0_status & ST0_TS) ? "" : "not ");
+	      (multi_match) ? "" : "not ");
 }

 asmlinkage void do_mt(struct pt_regs *regs)
@ -902,6 +917,7 @@ static inline void parity_protection_init(void)
 {
 	switch (current_cpu_data.cputype) {
 	case CPU_24K:
+	case CPU_34K:
 	case CPU_5KC:
 		write_c0_ecc(0x80000000);
 		back_to_back_c0_hazard();
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@ -151,23 +151,13 @@ SECTIONS

  /* This is the MIPS specific mdebug section.  */
  .mdebug : { *(.mdebug) }
-  /* These are needed for ELF backends which have not yet been
-     converted to the new style linker.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  /* DWARF debug sections.
-     Symbols in the .debug DWARF section are relative to the beginning of the
-     section so we begin .debug at 0.  It's not clear yet what needs to happen
-     for the others.   */
-  .debug          0 : { *(.debug) }
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  .line           0 : { *(.line) }
+
+  STABS_DEBUG
+
+  DWARF_DEBUG
+
  /* These must appear regardless of  .  */
  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-  .comment : { *(.comment) }
  .note : { *(.note) }
 }
--- a/arch/mips/math-emu/dp_fint.c
+++ b/arch/mips/math-emu/dp_fint.c
@ -29,7 +29,9 @@

 ieee754dp ieee754dp_fint(int x)
 {
-	COMPXDP;
+	u64 xm;
+	int xe;
+	int xs;

 	CLEARCX;

--- a/arch/mips/math-emu/dp_flong.c
+++ b/arch/mips/math-emu/dp_flong.c
@ -29,7 +29,9 @@

 ieee754dp ieee754dp_flong(s64 x)
 {
-	COMPXDP;
+	u64 xm;
+	int xe;
+	int xs;

 	CLEARCX;

--- a/arch/mips/math-emu/sp_fint.c
+++ b/arch/mips/math-emu/sp_fint.c
@ -29,7 +29,9 @@

 ieee754sp ieee754sp_fint(int x)
 {
-	COMPXSP;
+	unsigned xm;
+	int xe;
+	int xs;

 	CLEARCX;

--- a/arch/mips/math-emu/sp_flong.c
+++ b/arch/mips/math-emu/sp_flong.c
@ -29,7 +29,9 @@

 ieee754sp ieee754sp_flong(s64 x)
 {
-	COMPXDP;		/* <--- need 64-bit mantissa temp */
+	u64 xm;		/* <--- need 64-bit mantissa temp */
+	int xe;
+	int xs;

 	CLEARCX;

--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@ -29,6 +29,27 @@
 #include <asm/war.h>
 #include <asm/cacheflush.h> /* for run_uncached() */

+
+/*
+ * Special Variant of smp_call_function for use by cache functions:
+ *
+ *  o No return value
+ *  o collapses to normal function call on UP kernels
+ *  o collapses to normal function call on systems with a single shared
+ *    primary cache.
+ */
+static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
+                                   int retry, int wait)
+{
+	preempt_disable();
+
+#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+	smp_call_function(func, info, retry, wait);
+#endif
+	func(info);
+	preempt_enable();
+}
+
 /*
 * Must die.
 */
@ -299,7 +320,7 @@ static void r4k_flush_cache_all(void)
 	if (!cpu_has_dc_aliases)
 		return;

-	on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
 }

 static inline void local_r4k___flush_cache_all(void * args)
@ -314,13 +335,14 @@ static inline void local_r4k___flush_cache_all(void * args)
 	case CPU_R4400MC:
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		r4k_blast_scache();
 	}
 }

 static void r4k___flush_cache_all(void)
 {
-	on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
+	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
 }

 static inline void local_r4k_flush_cache_range(void * args)
@ -341,7 +363,7 @@ static inline void local_r4k_flush_cache_range(void * args)
 static void r4k_flush_cache_range(struct vm_area_struct *vma,
 	unsigned long start, unsigned long end)
 {
-	on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
 }

 static inline void local_r4k_flush_cache_mm(void * args)
@ -370,7 +392,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 	if (!cpu_has_dc_aliases)
 		return;

-	on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
 }

 struct flush_cache_page_args {
@ -461,7 +483,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
 	args.addr = addr;
 	args.pfn = pfn;

-	on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
 }

 static inline void local_r4k_flush_data_cache_page(void * addr)
@ -471,7 +493,7 @@ static inline void local_r4k_flush_data_cache_page(void * addr)

 static void r4k_flush_data_cache_page(unsigned long addr)
 {
-	on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
 }

 struct flush_icache_range_args {
@ -514,7 +536,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;

-	on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
 	instruction_hazard();
 }

@ -590,7 +612,7 @@ static void r4k_flush_icache_page(struct vm_area_struct *vma,
 	args.vma = vma;
 	args.page = page;

-	on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
 }


@ -689,7 +711,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)

 static void r4k_flush_cache_sigtramp(unsigned long addr)
 {
-	on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
 }

 static void r4k_flush_icache_all(void)
@ -812,6 +834,7 @@ static void __init probe_pcache(void)

 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
 		c->icache.linesz = 64;
 		c->icache.ways = 2;
@ -965,9 +988,11 @@ static void __init probe_pcache(void)
 		c->dcache.flags |= MIPS_CACHE_PINDEX;
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 	case CPU_SB1:
 		break;
 	case CPU_24K:
+	case CPU_34K:
 		if (!(read_c0_config7() & (1 << 16)))
 	default:
 			if (c->dcache.waysize > PAGE_SIZE)
@ -1091,6 +1116,7 @@ static void __init setup_scache(void)

 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
 		c->scache.linesz = 64 << ((config >> 13) & 1);
 		c->scache.ways = 2;
@ -1135,6 +1161,31 @@ static void __init setup_scache(void)
 	c->options |= MIPS_CPU_SUBSET_CACHES;
 }

+void au1x00_fixup_config_od(void)
+{
+	/*
+	 * c0_config.od (bit 19) was write only (and read as 0)
+	 * on the early revisions of Alchemy SOCs.  It disables the bus
+	 * transaction overlapping and needs to be set to fix various errata.
+	 */
+	switch (read_c0_prid()) {
+	case 0x00030100: /* Au1000 DA */
+	case 0x00030201: /* Au1000 HA */
+	case 0x00030202: /* Au1000 HB */
+	case 0x01030200: /* Au1500 AB */
+	/*
+	 * Au1100 errata actually keeps silence about this bit, so we set it
+	 * just in case for those revisions that require it to be set according
+	 * to arch/mips/au1000/common/cputable.c
+	 */
+	case 0x02030200: /* Au1100 AB */
+	case 0x02030201: /* Au1100 BA */
+	case 0x02030202: /* Au1100 BC */
+		set_c0_config(1 << 19);
+		break;
+	}
+}
+
 static inline void coherency_setup(void)
 {
 	change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
@ -1155,6 +1206,15 @@ static inline void coherency_setup(void)
 	case CPU_R4400MC:
 		clear_c0_config(CONF_CU);
 		break;
+	/*
+	 * We need to catch the ealry Alchemy SOCs with
+	 * the write-only co_config.od bit and set it back to one...
+	 */
+	case CPU_AU1000: /* rev. DA, HA, HB */
+	case CPU_AU1100: /* rev. AB, BA, BC ?? */
+	case CPU_AU1500: /* rev. AB */
+		au1x00_fixup_config_od();
+		break;
 	}
 }

--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@ -227,7 +227,7 @@ void __init mem_init(void)
 	for (tmp = 0; tmp < max_low_pfn; tmp++)
 		if (page_is_ram(tmp)) {
 			ram++;
-			if (PageReserved(mem_map+tmp))
+			if (PageReserved(pfn_to_page(tmp)))
 				reservedpages++;
 		}

--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@ -357,6 +357,7 @@ void __init build_clear_page(void)

 		case CPU_R10000:
 		case CPU_R12000:
+		case CPU_R14000:
 			pref_src_mode = Pref_LoadStreamed;
 			pref_dst_mode = Pref_StoreStreamed;
 			break;
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@ -875,6 +875,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,

 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 	case CPU_4KC:
 	case CPU_SB1:
 	case CPU_SB1A:
@ -906,6 +907,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_4KEC:
 	case CPU_24K:
 	case CPU_34K:
+	case CPU_74K:
 		i_ehb(p);
 		tlbw(p);
 		break;
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ b/arch/mips/momentum/jaguar_atx/dbg_io.c
@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);

-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;

--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ b/arch/mips/momentum/ocelot_c/dbg_io.c
@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);

-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;

--- a/arch/mips/momentum/ocelot_g/dbg_io.c
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);

-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;

--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@ -14,8 +14,8 @@

 #include "op_impl.h"

-extern struct op_mips_model op_model_mipsxx __attribute__((weak));
-extern struct op_mips_model op_model_rm9000 __attribute__((weak));
+extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
+extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));

 static struct op_mips_model *model;

@ -80,13 +80,14 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_24K:
 	case CPU_25KF:
 	case CPU_34K:
+	case CPU_74K:
 	case CPU_SB1:
 	case CPU_SB1A:
-		lmodel = &op_model_mipsxx;
+		lmodel = &op_model_mipsxx_ops;
 		break;

 	case CPU_RM9000:
-		lmodel = &op_model_rm9000;
+		lmodel = &op_model_rm9000_ops;
 		break;
 	};

--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@ -23,7 +23,7 @@

 #define M_COUNTER_OVERFLOW		(1UL    << 31)

-struct op_mips_model op_model_mipsxx;
+struct op_mips_model op_model_mipsxx_ops;

 static struct mipsxx_register_config {
 	unsigned int control[4];
@ -34,7 +34,7 @@ static struct mipsxx_register_config {

 static void mipsxx_reg_setup(struct op_counter_config *ctr)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 	int i;

 	/* Compute the performance counter control word.  */
@ -62,7 +62,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr)

 static void mipsxx_cpu_setup (void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;

 	switch (counters) {
 	case 4:
@ -83,7 +83,7 @@ static void mipsxx_cpu_setup (void *args)
 /* Start all counters on current CPU */
 static void mipsxx_cpu_start(void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;

 	switch (counters) {
 	case 4:
@ -100,7 +100,7 @@ static void mipsxx_cpu_start(void *args)
 /* Stop all counters on current CPU */
 static void mipsxx_cpu_stop(void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;

 	switch (counters) {
 	case 4:
@ -116,7 +116,7 @@ static void mipsxx_cpu_stop(void *args)

 static int mipsxx_perfcount_handler(struct pt_regs *regs)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 	unsigned int control;
 	unsigned int counter;
 	int handled = 0;
@ -187,33 +187,37 @@ static int __init mipsxx_init(void)

 	reset_counters(counters);

-	op_model_mipsxx.num_counters = counters;
+	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_data.cputype) {
 	case CPU_20KC:
-		op_model_mipsxx.cpu_type = "mips/20K";
+		op_model_mipsxx_ops.cpu_type = "mips/20K";
 		break;

 	case CPU_24K:
-		op_model_mipsxx.cpu_type = "mips/24K";
+		op_model_mipsxx_ops.cpu_type = "mips/24K";
 		break;

 	case CPU_25KF:
-		op_model_mipsxx.cpu_type = "mips/25K";
+		op_model_mipsxx_ops.cpu_type = "mips/25K";
 		break;

 #ifndef CONFIG_SMP
 	case CPU_34K:
-		op_model_mipsxx.cpu_type = "mips/34K";
+		op_model_mipsxx_ops.cpu_type = "mips/34K";
+		break;
+
+	case CPU_74K:
+		op_model_mipsxx_ops.cpu_type = "mips/74K";
 		break;
 #endif

 	case CPU_5KC:
-		op_model_mipsxx.cpu_type = "mips/5K";
+		op_model_mipsxx_ops.cpu_type = "mips/5K";
 		break;

 	case CPU_SB1:
 	case CPU_SB1A:
-		op_model_mipsxx.cpu_type = "mips/sb1";
+		op_model_mipsxx_ops.cpu_type = "mips/sb1";
 		break;

 	default:
@ -229,12 +233,12 @@ static int __init mipsxx_init(void)

 static void mipsxx_exit(void)
 {
-	reset_counters(op_model_mipsxx.num_counters);
+	reset_counters(op_model_mipsxx_ops.num_counters);

 	perf_irq = null_perf_irq;
 }

-struct op_mips_model op_model_mipsxx = {
+struct op_mips_model op_model_mipsxx_ops = {
 	.reg_setup	= mipsxx_reg_setup,
 	.cpu_setup	= mipsxx_cpu_setup,
 	.init		= mipsxx_init,
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@ -126,7 +126,7 @@ static void rm9000_exit(void)
 	free_irq(rm9000_perfcount_irq, NULL);
 }

-struct op_mips_model op_model_rm9000 = {
+struct op_mips_model op_model_rm9000_ops = {
 	.reg_setup	= rm9000_reg_setup,
 	.cpu_setup	= rm9000_cpu_setup,
 	.init		= rm9000_init,
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@ -31,12 +31,12 @@
 /* issue a PIO read to make sure no PIO writes are pending */
 static void inline flush_crime_bus(void)
 {
-	volatile unsigned long junk = crime->control;
+	crime->control;
 }

 static void inline flush_mace_bus(void)
 {
-	volatile unsigned long junk = mace->perif.ctrl.misc;
+	mace->perif.ctrl.misc;
 }

 #undef DEBUG_IRQ
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@ -1157,6 +1157,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
 /* some quirks for platform function decoding */
 enum {
 	pmac_i2c_quirk_invmask = 0x00000001u,
+	pmac_i2c_quirk_skip = 0x00000002u,
 };

 static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
@ -1172,6 +1173,15 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
 		/* XXX Study device-tree's & apple drivers are get the quirks
 		 * right !
 		 */
+		/* Workaround: It seems that running the clockspreading
+		 * properties on the eMac will cause lockups during boot.
+		 * The machine seems to work fine without that. So for now,
+		 * let's make sure i2c-hwclock doesn't match about "imic"
+		 * clocks and we'll figure out if we really need to do
+		 * something special about those later.
+		 */
+		{ "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
+		{ "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
 		{ "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
 		{ "i2c-cpu-voltage", NULL, 0},
 		{  "temp-monitor", NULL, 0 },
@ -1198,6 +1208,8 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
 				if (p->compatible &&
 				    !device_is_compatible(np, p->compatible))
 					continue;
+				if (p->quirks & pmac_i2c_quirk_skip)
+					break;
 				callback(np, p->quirks);
 				break;
 			}
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
+#include <linux/mutex.h>

 #include <asm/semaphore.h>
 #include <asm/prom.h>
@ -546,6 +547,7 @@ struct pmf_device {

 static LIST_HEAD(pmf_devices);
 static spinlock_t pmf_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_MUTEX(pmf_irq_mutex);

 static void pmf_release_device(struct kref *kref)
 {
@ -864,15 +866,17 @@ int pmf_register_irq_client(struct device_node *target,

 	spin_lock_irqsave(&pmf_lock, flags);
 	func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN);
-	if (func == NULL) {
-		spin_unlock_irqrestore(&pmf_lock, flags);
+	if (func)
+		func = pmf_get_function(func);
+	spin_unlock_irqrestore(&pmf_lock, flags);
+	if (func == NULL)
 		return -ENODEV;
-	}
+	mutex_lock(&pmf_irq_mutex);
 	if (list_empty(&func->irq_clients))
 		func->dev->handlers->irq_enable(func);
 	list_add(&client->link, &func->irq_clients);
 	client->func = func;
-	spin_unlock_irqrestore(&pmf_lock, flags);
+	mutex_unlock(&pmf_irq_mutex);

 	return 0;
 }
@ -881,16 +885,16 @@ EXPORT_SYMBOL_GPL(pmf_register_irq_client);
 void pmf_unregister_irq_client(struct pmf_irq_client *client)
 {
 	struct pmf_function *func = client->func;
-	unsigned long flags;

 	BUG_ON(func == NULL);

-	spin_lock_irqsave(&pmf_lock, flags);
+	mutex_lock(&pmf_irq_mutex);
 	client->func = NULL;
 	list_del(&client->link);
 	if (list_empty(&func->irq_clients))
 		func->dev->handlers->irq_disable(func);
-	spin_unlock_irqrestore(&pmf_lock, flags);
+	mutex_unlock(&pmf_irq_mutex);
+	pmf_put_function(func);
 }
 EXPORT_SYMBOL_GPL(pmf_unregister_irq_client);

--- a/arch/ppc/kernel/asm-offsets.c
+++ b/arch/ppc/kernel/asm-offsets.c
@ -134,7 +134,7 @@ main(void)
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
 	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
 	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));

--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@ -10,6 +10,7 @@
 #include <linux/config.h>
 #include <linux/version.h>
 #include <linux/errno.h>
+#include <linux/threads.h>
 #include <asm/thread_info.h>
 #include <asm/asi.h>
 #include <asm/pstate.h>
@ -493,6 +494,35 @@ tlb_fixup_done:
 	call	prom_init
 	 mov	%l7, %o0			! OpenPROM cif handler

+	/* Initialize current_thread_info()->cpu as early as possible.
+	 * In order to do that accurately we have to patch up the get_cpuid()
+	 * assembler sequences.  And that, in turn, requires that we know
+	 * if we are on a Starfire box or not.  While we're here, patch up
+	 * the sun4v sequences as well.
+	 */
+	call	check_if_starfire
+	 nop
+	call	per_cpu_patch
+	 nop
+	call	sun4v_patch
+	 nop
+
+#ifdef CONFIG_SMP
+	call	hard_smp_processor_id
+	 nop
+	cmp	%o0, NR_CPUS
+	blu,pt	%xcc, 1f
+	 nop
+	call	boot_cpu_id_too_large
+	 nop
+	/* Not reached... */
+
+1:
+#else
+	mov	0, %o0
+#endif
+	stb	%o0, [%g6 + TI_CPU]
+
 	/* Off we go.... */
 	call	start_kernel
 	 nop
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@ -220,7 +220,7 @@ char reboot_command[COMMAND_LINE_SIZE];

 static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 };

-static void __init per_cpu_patch(void)
+void __init per_cpu_patch(void)
 {
 	struct cpuid_patch_entry *p;
 	unsigned long ver;
@ -280,7 +280,7 @@ static void __init per_cpu_patch(void)
 	}
 }

-static void __init sun4v_patch(void)
+void __init sun4v_patch(void)
 {
 	struct sun4v_1insn_patch_entry *p1;
 	struct sun4v_2insn_patch_entry *p2;
@ -315,6 +315,15 @@ static void __init sun4v_patch(void)
 	}
 }

+#ifdef CONFIG_SMP
+void __init boot_cpu_id_too_large(int cpu)
+{
+	prom_printf("Serious problem, boot cpu id (%d) >= NR_CPUS (%d)\n",
+		    cpu, NR_CPUS);
+	prom_halt();
+}
+#endif
+
 void __init setup_arch(char **cmdline_p)
 {
 	/* Initialize PROM console and command line. */
@ -332,16 +341,6 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &prom_con;
 #endif

-	/* Work out if we are starfire early on */
-	check_if_starfire();
-
-	/* Now we know enough to patch the get_cpuid sequences
-	 * used by trap code.
-	 */
-	per_cpu_patch();
-
-	sun4v_patch();
-
 	boot_flags_init(*cmdline_p);

 	idprom_init();
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@ -1264,7 +1264,6 @@ void __init smp_tick_init(void)
 	boot_cpu_id = hard_smp_processor_id();
 	current_tick_offset = timer_tick_offset;

-	cpu_set(boot_cpu_id, cpu_online_map);
 	prof_counter(boot_cpu_id) = prof_multiplier(boot_cpu_id) = 1;
 }

@ -1345,18 +1344,6 @@ void __init smp_setup_cpu_possible_map(void)

 void __devinit smp_prepare_boot_cpu(void)
 {
-	int cpu = hard_smp_processor_id();
-
-	if (cpu >= NR_CPUS) {
-		prom_printf("Serious problem, boot cpu id >= NR_CPUS\n");
-		prom_halt();
-	}
-
-	current_thread_info()->cpu = cpu;
-	__local_per_cpu_offset = __per_cpu_offset(cpu);
-
-	cpu_set(smp_processor_id(), cpu_online_map);
-	cpu_set(smp_processor_id(), phys_cpu_present_map);
 }

 int __devinit __cpu_up(unsigned int cpu)
@ -1433,4 +1420,7 @@ void __init setup_per_cpu_areas(void)

 	for (i = 0; i < NR_CPUS; i++, ptr += size)
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+
+	/* Setup %g5 for the boot cpu.  */
+	__local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
 }
--- a/arch/sparc64/lib/checksum.S
+++ b/arch/sparc64/lib/checksum.S
@ -165,8 +165,9 @@ csum_partial_end_cruft:
 	sll		%g1, 8, %g1
 	or		%o5, %g1, %o4

-1:	add		%o2, %o4, %o2
+1:	addcc		%o2, %o4, %o2
+	addc		%g0, %o2, %o2

 csum_partial_finish:
 	retl
-	 mov		%o2, %o0
+	 srl		%o2, 0, %o0
--- a/arch/sparc64/lib/csum_copy.S
+++ b/arch/sparc64/lib/csum_copy.S
@ -221,11 +221,12 @@ FUNC_NAME:		/* %o0=src, %o1=dst, %o2=len, %o3=sum */
 	sll		%g1, 8, %g1
 	or		%o5, %g1, %o4

-1:	add		%o3, %o4, %o3
+1:	addcc		%o3, %o4, %o3
+	addc		%g0, %o3, %o3

 70:
 	retl
-	 mov		%o3, %o0
+	 srl		%o3, 0, %o0

 95:	mov		0, GLOBAL_SPARE
 	brlez,pn	%o2, 4f
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@ -33,5 +33,9 @@ include $(srctree)/arch/i386/Makefile.cpu
 # prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
 cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)

+# Prevent sprintf in nfsd from being converted to strcpy and resulting in
+# an unresolved reference.
+cflags-y += -ffreestanding
+
 CFLAGS += $(cflags-y)
 USER_CFLAGS += $(cflags-y)
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/kern_util.h
@ -120,20 +120,11 @@ extern int is_syscall(unsigned long addr);
 extern void free_irq(unsigned int, void *);
 extern int cpu(void);

+extern void time_init_kern(void);
+
 /* Are we disallowed to sleep? Used to choose between GFP_KERNEL and GFP_ATOMIC. */
 extern int __cant_sleep(void);
 extern void segv_handler(int sig, union uml_pt_regs *regs);
 extern void sigio_handler(int sig, union uml_pt_regs *regs);

 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
--- a/arch/um/kernel/time_kern.c
+++ b/arch/um/kernel/time_kern.c
@ -84,6 +84,16 @@ void timer_irq(union uml_pt_regs *regs)
 	}
 }

+
+void time_init_kern(void)
+{
+	unsigned long long nsecs;
+
+	nsecs = os_nsecs();
+	set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
+				-nsecs % BILLION);
+}
+
 void do_boot_timer_handler(struct sigcontext * sc)
 {
 	struct pt_regs regs;
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@ -59,7 +59,7 @@ static __init void do_uml_initcalls(void)
 	initcall_t *call;

 	call = &__uml_initcall_start;
-	while (call < &__uml_initcall_end){;
+	while (call < &__uml_initcall_end){
 		(*call)();
 		call++;
 	}
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@ -81,20 +81,12 @@ void uml_idle_timer(void)
 	set_interval(ITIMER_REAL);
 }

-extern void ktime_get_ts(struct timespec *ts);
-#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts)
-
 void time_init(void)
 {
-	struct timespec now;
-
 	if(signal(SIGVTALRM, boot_timer_handler) == SIG_ERR)
 		panic("Couldn't set SIGVTALRM handler");
 	set_interval(ITIMER_VIRTUAL);
-
-	do_posix_clock_monotonic_gettime(&now);
-	wall_to_monotonic.tv_sec = -now.tv_sec;
-	wall_to_monotonic.tv_nsec = -now.tv_nsec;
+	time_init_kern();
 }

 unsigned long long os_nsecs(void)
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@ -99,11 +99,12 @@ long sys_ipc (uint call, int first, int second,

 	switch (call) {
 	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf *) ptr, second,
-				      NULL);
+		return sys_semtimedop(first, (struct sembuf __user *) ptr,
+				      second, NULL);
 	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf *) ptr, second,
-				      (const struct timespec *) fifth);
+		return sys_semtimedop(first, (struct sembuf __user *) ptr,
+				      second,
+				      (const struct timespec __user *) fifth);
 	case SEMGET:
 		return sys_semget (first, second, third);
 	case SEMCTL: {
--- a/arch/um/sys-x86_64/signal.c
+++ b/arch/um/sys-x86_64/signal.c
@ -21,7 +21,7 @@
 #include "skas.h"

 static int copy_sc_from_user_skas(struct pt_regs *regs,
-                                 struct sigcontext *from)
+                                 struct sigcontext __user *from)
 {
       int err = 0;

@ -54,7 +54,8 @@ static int copy_sc_from_user_skas(struct pt_regs *regs,
       return(err);
 }

-int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
+int copy_sc_to_user_skas(struct sigcontext __user *to,
+			 struct _fpstate __user *to_fp,
 			 struct pt_regs *regs, unsigned long mask,
 			 unsigned long sp)
 {
@ -106,10 +107,11 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
 #endif

 #ifdef CONFIG_MODE_TT
-int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
+int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from,
 			 int fpsize)
 {
-	struct _fpstate *to_fp, *from_fp;
+	struct _fpstate *to_fp;
+	struct _fpstate __user *from_fp;
 	unsigned long sigs;
 	int err;

@ -124,13 +126,14 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
 	return(err);
 }

-int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp,
+int copy_sc_to_user_tt(struct sigcontext __user *to, struct _fpstate __user *fp,
 		       struct sigcontext *from, int fpsize, unsigned long sp)
 {
-	struct _fpstate *to_fp, *from_fp;
+	struct _fpstate __user *to_fp;
+	struct _fpstate *from_fp;
 	int err;

-	to_fp = (fp ? fp : (struct _fpstate *) (to + 1));
+	to_fp = (fp ? fp : (struct _fpstate __user *) (to + 1));
 	from_fp = from->fpstate;
 	err = copy_to_user(to, from, sizeof(*to));
 	/* The SP in the sigcontext is the updated one for the signal
@ -158,7 +161,8 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from)
       return(ret);
 }

-static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
+static int copy_sc_to_user(struct sigcontext __user *to,
+			   struct _fpstate __user *fp,
 			   struct pt_regs *from, unsigned long mask,
 			   unsigned long sp)
 {
@ -169,7 +173,7 @@ static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,

 struct rt_sigframe
 {
-       char *pretcode;
+       char __user *pretcode;
       struct ucontext uc;
       struct siginfo info;
 };
@ -188,7 +192,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig,

 	frame = (struct rt_sigframe __user *)
 		round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8;
-        frame = (struct rt_sigframe *) ((unsigned long) frame - 128);
+        frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128);

 	if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
 		goto out;
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@ -45,7 +45,7 @@ static long arch_prctl_tt(int code, unsigned long addr)
 	case ARCH_GET_GS:
 		ret = arch_prctl(code, (unsigned long) &tmp);
 		if(!ret)
-			ret = put_user(tmp, &addr);
+			ret = put_user(tmp, (long __user *)addr);
 		break;
 	default:
 		ret = -EINVAL;
--- a/arch/x86_64/ia32/ia32_binfmt.c
+++ b/arch/x86_64/ia32/ia32_binfmt.c
@ -339,7 +339,7 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top,
 	struct mm_struct *mm = current->mm;
 	int i, ret;

-	stack_base = IA32_STACK_TOP - MAX_ARG_PAGES * PAGE_SIZE;
+	stack_base = stack_top - MAX_ARG_PAGES * PAGE_SIZE;
 	mm->arg_start = bprm->p + stack_base;

 	bprm->p += stack_base;
@ -357,7 +357,7 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top,
 	{
 		mpnt->vm_mm = mm;
 		mpnt->vm_start = PAGE_MASK & (unsigned long) bprm->p;
-		mpnt->vm_end = IA32_STACK_TOP;
+		mpnt->vm_end = stack_top;
 		if (executable_stack == EXSTACK_ENABLE_X)
 			mpnt->vm_flags = VM_STACK_FLAGS |  VM_EXEC;
 		else if (executable_stack == EXSTACK_DISABLE_X)
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@ -149,7 +149,7 @@ unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsi
 			addr = start;
 		if (addr > ei->addr + ei->size) 
 			continue; 
-		while (bad_addr(&addr, size) && addr+size < ei->addr + ei->size)
+		while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size)
 			;
 		last = addr + size;
 		if (last > ei->addr + ei->size)
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@ -281,12 +281,7 @@ tracesys:
 	ja  1f
 	movq %r10,%rcx	/* fixup for C */
 	call *sys_call_table(,%rax,8)
-	movq %rax,RAX-ARGOFFSET(%rsp)
-1:	SAVE_REST
-	movq %rsp,%rdi
-	call syscall_trace_leave
-	RESTORE_TOP_OF_STACK %rbx
-	RESTORE_REST
+1:	movq %rax,RAX-ARGOFFSET(%rsp)
 	/* Use IRET because user could have changed frame */
 	jmp int_ret_from_sys_call
 	CFI_ENDPROC
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@ -54,6 +54,10 @@ dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
 	else
 #endif
 		node = numa_node_id();
+
+	if (node < first_node(node_online_map))
+		node = first_node(node_online_map);
+
 	page = alloc_pages_node(node, gfp, order);
 	return page ? page_address(page) : NULL;
 }
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@ -631,10 +631,8 @@ static int __init pci_iommu_init(void)
 		printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
 		if (end_pfn > MAX_DMA32_PFN) {
 			printk(KERN_ERR "WARNING more than 4GB of memory "
-					"but IOMMU not compiled in.\n"
-			       KERN_ERR "WARNING 32bit PCI may malfunction.\n"
-			       KERN_ERR "You might want to enable "
-					"CONFIG_GART_IOMMU\n");
+					"but IOMMU not available.\n"
+			       KERN_ERR "WARNING 32bit PCI may malfunction.\n");
 		}
 		return -1;
 	}
--- a/arch/x86_64/kernel/pmtimer.c
+++ b/arch/x86_64/kernel/pmtimer.c
@ -68,7 +68,7 @@ int pmtimer_mark_offset(void)
 	offset_delay = delta % (USEC_PER_SEC / HZ);

 	rdtscll(tsc);
-	vxtime.last_tsc = tsc - offset_delay * cpu_khz;
+	vxtime.last_tsc = tsc - offset_delay * (u64)cpu_khz / 1000;

 	/* don't calculate delay for first run,
 	   or if we've got less then a tick */
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@ -1051,7 +1051,7 @@ static void srat_detect_node(void)
 	   for now. */
 	node = apicid_to_node[hard_smp_processor_id()];
 	if (node == NUMA_NO_NODE)
-		node = 0;
+		node = first_node(node_online_map);
 	numa_set_node(cpu, node);

 	if (acpi_numa > 0)
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@ -399,8 +399,10 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 	/* First clean up the node list */
 	for (i = 0; i < MAX_NUMNODES; i++) {
 		cutoff_node(i, start, end);
-		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE)
+		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
 			unparse_node(i);
+			node_set_offline(i);
+		}
 	}

 	if (acpi_numa <= 0)
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@ -33,7 +33,7 @@ static int cfq_slice_idle = HZ / 70;

 #define CFQ_KEY_ASYNC		(0)

-static DEFINE_RWLOCK(cfq_exit_lock);
+static DEFINE_SPINLOCK(cfq_exit_lock);

 /*
 * for the hash of cfqq inside the cfqd
@ -133,6 +133,7 @@ struct cfq_data {
 	mempool_t *crq_pool;

 	int rq_in_driver;
+	int hw_tag;

 	/*
 	 * schedule slice state info
@ -500,10 +501,13 @@ static void cfq_resort_rr_list(struct cfq_queue *cfqq, int preempted)

 	/*
 	 * if queue was preempted, just add to front to be fair. busy_rr
-	 * isn't sorted.
+	 * isn't sorted, but insert at the back for fairness.
 	 */
 	if (preempted || list == &cfqd->busy_rr) {
-		list_add(&cfqq->cfq_list, list);
+		if (preempted)
+			list = list->prev;
+
+		list_add_tail(&cfqq->cfq_list, list);
 		return;
 	}

@ -664,6 +668,15 @@ static void cfq_activate_request(request_queue_t *q, struct request *rq)
 	struct cfq_data *cfqd = q->elevator->elevator_data;

 	cfqd->rq_in_driver++;
+
+	/*
+	 * If the depth is larger 1, it really could be queueing. But lets
+	 * make the mark a little higher - idling could still be good for
+	 * low queueing, and a low queueing number could also just indicate
+	 * a SCSI mid layer like behaviour where limit+1 is often seen.
+	 */
+	if (!cfqd->hw_tag && cfqd->rq_in_driver > 4)
+		cfqd->hw_tag = 1;
 }

 static void cfq_deactivate_request(request_queue_t *q, struct request *rq)
@ -878,6 +891,13 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
 	if (!list_empty(&cfqd->cur_rr) || cfq_get_next_prio_level(cfqd) != -1)
 		cfqq = list_entry_cfqq(cfqd->cur_rr.next);

+	/*
+	 * If no new queues are available, check if the busy list has some
+	 * before falling back to idle io.
+	 */
+	if (!cfqq && !list_empty(&cfqd->busy_rr))
+		cfqq = list_entry_cfqq(cfqd->busy_rr.next);
+
 	/*
 	 * if we have idle queues and no rt or be queues had pending
 	 * requests, either allow immediate service if the grace period
@ -1284,7 +1304,7 @@ static void cfq_exit_io_context(struct io_context *ioc)
 	/*
 	 * put the reference this task is holding to the various queues
 	 */
-	read_lock_irqsave(&cfq_exit_lock, flags);
+	spin_lock_irqsave(&cfq_exit_lock, flags);

 	n = rb_first(&ioc->cic_root);
 	while (n != NULL) {
@ -1294,7 +1314,7 @@ static void cfq_exit_io_context(struct io_context *ioc)
 		n = rb_next(n);
 	}

-	read_unlock_irqrestore(&cfq_exit_lock, flags);
+	spin_unlock_irqrestore(&cfq_exit_lock, flags);
 }

 static struct cfq_io_context *
@ -1400,17 +1420,17 @@ static int cfq_ioc_set_ioprio(struct io_context *ioc, unsigned int ioprio)
 	struct cfq_io_context *cic;
 	struct rb_node *n;

-	write_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);

 	n = rb_first(&ioc->cic_root);
 	while (n != NULL) {
 		cic = rb_entry(n, struct cfq_io_context, rb_node);
- 
+
 		changed_ioprio(cic);
 		n = rb_next(n);
 	}

-	write_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);

 	return 0;
 }
@ -1458,7 +1478,8 @@ retry:
 		 * set ->slice_left to allow preemption for a new process
 		 */
 		cfqq->slice_left = 2 * cfqd->cfq_slice_idle;
-		cfq_mark_cfqq_idle_window(cfqq);
+		if (!cfqd->hw_tag)
+			cfq_mark_cfqq_idle_window(cfqq);
 		cfq_mark_cfqq_prio_changed(cfqq);
 		cfq_init_prio_data(cfqq);
 	}
@ -1475,9 +1496,10 @@ out:
 static void
 cfq_drop_dead_cic(struct io_context *ioc, struct cfq_io_context *cic)
 {
-	read_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 	rb_erase(&cic->rb_node, &ioc->cic_root);
-	read_unlock(&cfq_exit_lock);
+	list_del_init(&cic->queue_list);
+	spin_unlock(&cfq_exit_lock);
 	kmem_cache_free(cfq_ioc_pool, cic);
 	atomic_dec(&ioc_count);
 }
@ -1545,11 +1567,11 @@ restart:
 			BUG();
 	}

-	read_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 	rb_link_node(&cic->rb_node, parent, p);
 	rb_insert_color(&cic->rb_node, &ioc->cic_root);
 	list_add(&cic->queue_list, &cfqd->cic_list);
-	read_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);
 }

 /*
@ -1648,7 +1670,7 @@ cfq_update_idle_window(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 {
 	int enable_idle = cfq_cfqq_idle_window(cfqq);

-	if (!cic->ioc->task || !cfqd->cfq_slice_idle)
+	if (!cic->ioc->task || !cfqd->cfq_slice_idle || cfqd->hw_tag)
 		enable_idle = 0;
 	else if (sample_valid(cic->ttime_samples)) {
 		if (cic->ttime_mean > cfqd->cfq_slice_idle)
@ -1739,14 +1761,24 @@ cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,

 	cfqq->next_crq = cfq_choose_req(cfqd, cfqq->next_crq, crq);

+	cic = crq->io_context;
+
 	/*
 	 * we never wait for an async request and we don't allow preemption
 	 * of an async request. so just return early
 	 */
-	if (!cfq_crq_is_sync(crq))
+	if (!cfq_crq_is_sync(crq)) {
+		/*
+		 * sync process issued an async request, if it's waiting
+		 * then expire it and kick rq handling.
+		 */
+		if (cic == cfqd->active_cic &&
+		    del_timer(&cfqd->idle_slice_timer)) {
+			cfq_slice_expired(cfqd, 0);
+			cfq_start_queueing(cfqd, cfqq);
+		}
 		return;
-
-	cic = crq->io_context;
+	}

 	cfq_update_io_thinktime(cfqd, cic);
 	cfq_update_io_seektime(cfqd, cic, crq);
@ -2164,10 +2196,9 @@ static void cfq_idle_class_timer(unsigned long data)
 	 * race with a non-idle queue, reset timer
 	 */
 	end = cfqd->last_end_request + CFQ_IDLE_GRACE;
-	if (!time_after_eq(jiffies, end)) {
-		cfqd->idle_class_timer.expires = end;
-		add_timer(&cfqd->idle_class_timer);
-	} else
+	if (!time_after_eq(jiffies, end))
+		mod_timer(&cfqd->idle_class_timer, end);
+	else
 		cfq_schedule_dispatch(cfqd);

 	spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
@ -2187,7 +2218,7 @@ static void cfq_exit_queue(elevator_t *e)

 	cfq_shutdown_timer_wq(cfqd);

-	write_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 	spin_lock_irq(q->queue_lock);

 	if (cfqd->active_queue)
@ -2210,7 +2241,7 @@ static void cfq_exit_queue(elevator_t *e)
 	}

 	spin_unlock_irq(q->queue_lock);
-	write_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);

 	cfq_shutdown_timer_wq(cfqd);

--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@ -8,7 +8,6 @@
 *
 */

-#include <linux/vt_kern.h>
 #include <linux/device.h>
 #include <linux/kallsyms.h>
 #include <linux/pm.h>
@ -66,6 +65,7 @@ int suspend_device(struct device * dev, pm_message_t state)
 	return error;
 }

+
 /**
 *	device_suspend - Save state and stop all devices in system.
 *	@state:		Power state to put each device in.
@ -85,9 +85,6 @@ int device_suspend(pm_message_t state)
 {
 	int error = 0;

-	if (!is_console_suspend_safe())
-		return -EINVAL;
-
 	down(&dpm_sem);
 	down(&dpm_list_sem);
 	while (!list_empty(&dpm_active) && error == 0) {
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@ -86,7 +86,7 @@ config AGP_NVIDIA

 config AGP_SIS
 	tristate "SiS chipset support"
-	depends on AGP && X86_32
+	depends on AGP
 	help
 	  This option gives you AGP support for the GLX component of
 	  X on Silicon Integrated Systems [SiS] chipsets.
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@ -617,6 +617,9 @@ static int agp_amd64_resume(struct pci_dev *pdev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);

+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA)
+		nforce3_agp_init(pdev);
+
 	return amd_8151_configure();
 }

--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@ -345,6 +345,12 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata =
 		.chipset_name	= "PT880",
 	},

+	/* PT880 Ultra */
+	{
+		.device_id	= PCI_DEVICE_ID_VIA_PT880ULTRA,
+		.chipset_name	= "PT880 Ultra",
+	},
+
 	/* PT890 */
 	{
 		.device_id	= PCI_DEVICE_ID_VIA_8783_0,
@ -511,6 +517,7 @@ static struct pci_device_id agp_via_pci_table[] = {
 	ID(PCI_DEVICE_ID_VIA_8763_0),
 	ID(PCI_DEVICE_ID_VIA_8378_0),
 	ID(PCI_DEVICE_ID_VIA_PT880),
+	ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
 	ID(PCI_DEVICE_ID_VIA_8783_0),
 	ID(PCI_DEVICE_ID_VIA_PX8X0_0),
 	ID(PCI_DEVICE_ID_VIA_3269_0),
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@ -1184,20 +1184,20 @@ static void port_outl(struct si_sm_io *io, unsigned int offset,
 static void port_cleanup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;

 	if (addr) {
-		mapsize = ((info->io_size * info->io.regspacing)
-			   - (info->io.regspacing - info->io.regsize));
-
-		release_region (addr, mapsize);
+	  	for (idx = 0; idx < info->io_size; idx++) {
+			release_region(addr + idx * info->io.regspacing,
+				       info->io.regsize);
+		}
 	}
 }

 static int port_setup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;

 	if (!addr)
 		return -ENODEV;
@ -1225,16 +1225,22 @@ static int port_setup(struct smi_info *info)
 		return -EINVAL;
 	}

-	/* Calculate the total amount of memory to claim.  This is an
-	 * unusual looking calculation, but it avoids claiming any
-	 * more memory than it has to.  It will claim everything
-	 * between the first address to the end of the last full
-	 * register. */
-	mapsize = ((info->io_size * info->io.regspacing)
-		   - (info->io.regspacing - info->io.regsize));
-
-	if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
-		return -EIO;
+	/* Some BIOSes reserve disjoint I/O regions in their ACPI
+	 * tables.  This causes problems when trying to register the
+	 * entire I/O region.  Therefore we must register each I/O
+	 * port separately.
+	 */
+  	for (idx = 0; idx < info->io_size; idx++) {
+		if (request_region(addr + idx * info->io.regspacing,
+				   info->io.regsize, DEVICE_NAME) == NULL) {
+			/* Undo allocations */
+			while (idx--) {
+				release_region(addr + idx * info->io.regspacing,
+					       info->io.regsize);
+			}
+			return -EIO;
+		}
+	}
 	return 0;
 }

--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@ -149,7 +149,7 @@ struct cm4000_dev {
 #define	ZERO_DEV(dev)  						\
 	memset(&dev->atr_csum,0,				\
 		sizeof(struct cm4000_dev) - 			\
-		/*link*/ sizeof(struct pcmcia_device) - 	\
+		/*link*/ sizeof(struct pcmcia_device *) - 	\
 		/*node*/ sizeof(dev_node_t) - 			\
 		/*atr*/ MAX_ATR*sizeof(char) - 			\
 		/*rbuf*/ 512*sizeof(char) - 			\
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@ -105,6 +105,12 @@ static const char* tcpa_event_type_strings[] = {
 	"Non-Host Info"
 };

+struct tcpa_pc_event {
+	u32 event_id;
+	u32 event_size;
+	u8 event_data[0];
+};
+
 enum tcpa_pc_event_ids {
 	SMBIOS = 1,
 	BIS_CERT,
@ -114,14 +120,15 @@ enum tcpa_pc_event_ids {
 	NVRAM,
 	OPTION_ROM_EXEC,
 	OPTION_ROM_CONFIG,
-	OPTION_ROM_MICROCODE,
+	OPTION_ROM_MICROCODE = 10,
 	S_CRTM_VERSION,
 	S_CRTM_CONTENTS,
 	POST_CONTENTS,
+	HOST_TABLE_OF_DEVICES,
 };

 static const char* tcpa_pc_event_id_strings[] = {
-	""
+	"",
 	"SMBIOS",
 	"BIS Certificate",
 	"POST BIOS ",
@ -130,11 +137,12 @@ static const char* tcpa_pc_event_id_strings[] = {
 	"NVRAM",
 	"Option ROM",
 	"Option ROM config",
-	"Option ROM microcode",
+	"",
+	"Option ROM microcode ",
 	"S-CRTM Version",
-	"S-CRTM Contents",
-	"S-CRTM POST Contents",
-	"POST Contents",
+	"S-CRTM Contents ",
+	"POST Contents ",
+	"Table of Devices",
 };

 /* returns pointer to start of pos. entry of tcg log */
@ -206,7 +214,7 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 	const char *name = "";
 	char data[40] = "";
 	int i, n_len = 0, d_len = 0;
-	u32 event_id;
+	struct tcpa_pc_event *pc_event;

 	switch(event->event_type) {
 	case PREBOOT:
@ -235,31 +243,32 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 		}
 		break;
 	case EVENT_TAG:
-		event_id = be32_to_cpu(*((u32 *)event_entry));
+		pc_event = (struct tcpa_pc_event *)event_entry;

 		/* ToDo Row data -> Base64 */

-		switch (event_id) {
+		switch (pc_event->event_id) {
 		case SMBIOS:
 		case BIS_CERT:
 		case CMOS:
 		case NVRAM:
 		case OPTION_ROM_EXEC:
 		case OPTION_ROM_CONFIG:
-		case OPTION_ROM_MICROCODE:
 		case S_CRTM_VERSION:
-		case S_CRTM_CONTENTS:
-		case POST_CONTENTS:
-			name = tcpa_pc_event_id_strings[event_id];
+			name = tcpa_pc_event_id_strings[pc_event->event_id];
 			n_len = strlen(name);
 			break;
+		/* hash data */
 		case POST_BIOS_ROM:
 		case ESCD:
-			name = tcpa_pc_event_id_strings[event_id];
+		case OPTION_ROM_MICROCODE:
+		case S_CRTM_CONTENTS:
+		case POST_CONTENTS:
+			name = tcpa_pc_event_id_strings[pc_event->event_id];
 			n_len = strlen(name);
 			for (i = 0; i < 20; i++)
-				d_len += sprintf(data, "%02x",
-						event_entry[8 + i]);
+				d_len += sprintf(&data[2*i], "%02x",
+						pc_event->event_data[i]);
 			break;
 		default:
 			break;
@ -275,53 +284,13 @@ static int get_event_name(char *dest, struct tcpa_event *event,

 static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v)
 {
+	struct tcpa_event *event = v;
+	char *data = v;
+	int i;

-	char *eventname;
-	char data[4];
-	u32 help;
-	int i, len;
-	struct tcpa_event *event = (struct tcpa_event *) v;
-	unsigned char *event_entry =
-	    (unsigned char *) (v + sizeof(struct tcpa_event));
-
-	eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL);
-	if (!eventname) {
-		printk(KERN_ERR "%s: ERROR - No Memory for event name\n ",
-		       __func__);
-		return -ENOMEM;
-	}
-
-	/* 1st: PCR used is in little-endian format (4 bytes) */
-	help = le32_to_cpu(event->pcr_index);
-	memcpy(data, &help, 4);
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < sizeof(struct tcpa_event) + event->event_size; i++)
 		seq_putc(m, data[i]);

-	/* 2nd: SHA1 (20 bytes) */
-	for (i = 0; i < 20; i++)
-		seq_putc(m, event->pcr_value[i]);
-
-	/* 3rd: event type identifier (4 bytes) */
-	help = le32_to_cpu(event->event_type);
-	memcpy(data, &help, 4);
-	for (i = 0; i < 4; i++)
-		seq_putc(m, data[i]);
-
-	len = 0;
-
-	len += get_event_name(eventname, event, event_entry);
-
-	/* 4th:  filename <= 255 + \'0' delimiter */
-	if (len > TCG_EVENT_NAME_LEN_MAX)
-		len = TCG_EVENT_NAME_LEN_MAX;
-
-	for (i = 0; i < len; i++)
-		seq_putc(m, eventname[i]);
-
-	/* 5th: delimiter */
-	seq_putc(m, '\0');
-
-	kfree(eventname);
 	return 0;
 }

--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@ -3238,14 +3238,6 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org)
 	}
 }

-int is_console_suspend_safe(void)
-{
-	/* It is unsafe to suspend devices while X has control of the
-	 * hardware. Make sure we are running on a kernel-controlled console.
-	 */
-	return vc_cons[fg_console].d->vc_mode == KD_TEXT;
-}
-
 /*
 *	Visible symbols for modules
 */
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@ -345,17 +345,17 @@ sgiioc4_resetproc(ide_drive_t * drive)
 static u8
 sgiioc4_INB(unsigned long port)
 {
-	u8 reg = (u8) inb(port);
+	u8 reg = (u8) readb((void __iomem *) port);

 	if ((port & 0xFFF) == 0x11C) {	/* Status register of IOC4 */
 		if (reg & 0x51) {	/* Not busy...check for interrupt */
 			unsigned long other_ir = port - 0x110;
-			unsigned int intr_reg = (u32) inl(other_ir);
+			unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);

 			/* Clear the Interrupt, Error bits on the IOC4 */
 			if (intr_reg & 0x03) {
-				outl(0x03, other_ir);
-				intr_reg = (u32) inl(other_ir);
+				writel(0x03, (void __iomem *) other_ir);
+				intr_reg = (u32) readl((void __iomem *) other_ir);
 			}
 		}
 	}
@ -606,6 +606,12 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
 	hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
 	hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
 	hwif->ide_dma_timeout = &__ide_dma_timeout;
+
+	/*
+	 * The IOC4 uses MMIO rather than Port IO.
+	 * It also needs special workarounds for INB.
+	 */
+	default_hwif_mmiops(hwif);
 	hwif->INB = &sgiioc4_INB;
 }

@ -743,6 +749,6 @@ ioc4_ide_exit(void)
 module_init(ioc4_ide_init);
 module_exit(ioc4_ide_exit);

-MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)");
+MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 MODULE_LICENSE("GPL");
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@ -845,7 +845,7 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 			&sbp2_highlevel, ud->ne->host, &sbp2_ops,
 			sizeof(struct sbp2_status_block), sizeof(quadlet_t),
 			0x010000000000ULL, CSR1212_ALL_SPACE_END);
-	if (!scsi_id->status_fifo_addr) {
+	if (scsi_id->status_fifo_addr == ~0ULL) {
 		SBP2_ERR("failed to allocate status FIFO address range");
 		goto failed_alloc;
 	}
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@ -275,6 +275,7 @@ static void ipoib_ib_handle_wc(struct net_device *dev,
 		spin_lock_irqsave(&priv->tx_lock, flags);
 		++priv->tx_tail;
 		if (netif_queue_stopped(dev) &&
+		    test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags) &&
 		    priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1)
 			netif_wake_queue(dev);
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@ -589,7 +589,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 	struct sw *sw;
 	struct input_dev *input_dev;
 	int i, j, k, l;
-	int err;
+	int err = 0;
 	unsigned char *buf = NULL;	/* [SW_LENGTH] */
 	unsigned char *idbuf = NULL;	/* [SW_LENGTH] */
 	unsigned char m = 1;
@ -776,7 +776,10 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 			goto fail4;
 	}

-	return 0;
+ out:	kfree(buf);
+	kfree(idbuf);
+
+	return err;

 fail4:	input_free_device(sw->dev[i]);
 fail3:	while (--i >= 0)
@ -784,9 +787,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 fail2:	gameport_close(gameport);
 fail1:	gameport_set_drvdata(gameport, NULL);
 	kfree(sw);
-	kfree(buf);
-	kfree(idbuf);
-	return err;
+	goto out;
 }

 static void sw_disconnect(struct gameport *gameport)
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@ -245,9 +245,9 @@ static void corgikbd_hinge_timer(unsigned long data)
 		if (hinge_count >= HINGE_STABLE_COUNT) {
 			spin_lock_irqsave(&corgikbd_data->lock, flags);

-			input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
-			input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
-			input_report_switch(corgikbd_data->input, SW_2, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
+			input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
+			input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
+			input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
 			input_sync(corgikbd_data->input);

 			spin_unlock_irqrestore(&corgikbd_data->lock, flags);
@ -340,9 +340,9 @@ static int __init corgikbd_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
 		set_bit(corgikbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
-	set_bit(SW_0, input_dev->swbit);
-	set_bit(SW_1, input_dev->swbit);
-	set_bit(SW_2, input_dev->swbit);
+	set_bit(SW_LID, input_dev->swbit);
+	set_bit(SW_TABLET_MODE, input_dev->swbit);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);

 	input_register_device(corgikbd->input);

--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@ -299,9 +299,9 @@ static void spitzkbd_hinge_timer(unsigned long data)
 	if (hinge_count >= HINGE_STABLE_COUNT) {
 		spin_lock_irqsave(&spitzkbd_data->lock, flags);

-		input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
-		input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
-		input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
 		input_sync(spitzkbd_data->input);

 		spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
@ -398,9 +398,9 @@ static int __init spitzkbd_probe(struct platform_device *dev)
 	for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
 		set_bit(spitzkbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
-	set_bit(SW_0, input_dev->swbit);
-	set_bit(SW_1, input_dev->swbit);
-	set_bit(SW_2, input_dev->swbit);
+	set_bit(SW_LID, input_dev->swbit);
+	set_bit(SW_TABLET_MODE, input_dev->swbit);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);

 	input_register_device(input_dev);

--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@ -318,6 +318,16 @@ static struct key_entry keymap_acer_travelmate_240[] = {
 	{ KE_END, 0 }
 };

+static struct key_entry keymap_aopen_1559as[] = {
+	{ KE_KEY,  0x01, KEY_HELP },
+	{ KE_KEY,  0x06, KEY_PROG3 },
+	{ KE_KEY,  0x11, KEY_PROG1 },
+	{ KE_KEY,  0x12, KEY_PROG2 },
+	{ KE_WIFI, 0x30, 0 },
+	{ KE_KEY,  0x31, KEY_MAIL },
+	{ KE_KEY,  0x36, KEY_WWW },
+};
+
 /*
 * If your machine is not here (which is currently rather likely), please send
 * a list of buttons and their key codes (reported when loading this module
@ -369,6 +379,15 @@ static struct dmi_system_id dmi_ids[] = {
 		},
 		.driver_data = keymap_acer_travelmate_240
 	},
+        {
+		.callback = dmi_matched,
+		.ident = "AOpen 1559AS",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2U"),
+			DMI_MATCH(DMI_BOARD_NAME, "E2U"),
+		},
+		.driver_data = keymap_aopen_1559as
+	},
 	{ NULL, }
 };

--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@ -100,8 +100,8 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
 	}

 	if (priv->i->flags & ALPS_OLDPROTO) {
-		left = packet[2] & 0x08;
-		right = packet[2] & 0x10;
+		left = packet[2] & 0x10;
+		right = packet[2] & 0x08;
 		middle = 0;
 		x = packet[1] | ((packet[0] & 0x07) << 7);
 		y = packet[4] | ((packet[3] & 0x07) << 7);
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@ -21,12 +21,36 @@
 #include "lifebook.h"

 static struct dmi_system_id lifebook_dmi_table[] = {
+       {
+               .ident = "LifeBook B",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
+               },
+       },
       {
               .ident = "Lifebook B",
               .matches = {
                       DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
               },
       },
+       {
+               .ident = "Lifebook B213x/B2150",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
+               },
+       },
+       {
+               .ident = "Zephyr",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
+               },
+       },
+       {
+               .ident = "CF-18",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+               },
+       },
       {
               .ident = "Lifebook B142",
               .matches = {
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@ -19,6 +19,7 @@
 #define PS2PP_KIND_WHEEL	1
 #define PS2PP_KIND_MX		2
 #define PS2PP_KIND_TP3		3
+#define PS2PP_KIND_TRACKMAN	4

 /* Logitech mouse features */
 #define PS2PP_WHEEL		0x01
@ -223,6 +224,7 @@ static struct ps2pp_info *get_model_info(unsigned char model)
 		{ 73,	0,			PS2PP_SIDE_BTN },
 		{ 75,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 76,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
+		{ 79,	PS2PP_KIND_TRACKMAN,	PS2PP_WHEEL },		/* TrackMan with wheel */
 		{ 80,	PS2PP_KIND_WHEEL,	PS2PP_SIDE_BTN | PS2PP_WHEEL },
 		{ 81,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 83,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
@ -298,6 +300,10 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_inf
 			psmouse->name = "TouchPad 3";
 			break;

+		case PS2PP_KIND_TRACKMAN:
+			psmouse->name = "TrackMan";
+			break;
+
 		default:
 			/*
 			 * Set name to "Mouse" only when using PS2++,
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@ -167,6 +167,15 @@ void md_new_event(mddev_t *mddev)
 }
 EXPORT_SYMBOL_GPL(md_new_event);

+/* Alternate version that can be called from interrupts
+ * when calling sysfs_notify isn't needed.
+ */
+void md_new_event_inintr(mddev_t *mddev)
+{
+	atomic_inc(&md_event_count);
+	wake_up(&md_event_waiters);
+}
+
 /*
 * Enables to iterate over all existing md arrays
 * all_mddevs_lock protects this list.
@ -4149,7 +4158,7 @@ void md_error(mddev_t *mddev, mdk_rdev_t *rdev)
 	set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	md_wakeup_thread(mddev->thread);
-	md_new_event(mddev);
+	md_new_event_inintr(mddev);
 }

 /* seq_file implementation /proc/mdstat */
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@ -1605,6 +1605,21 @@ mpt_resume(struct pci_dev *pdev)
 }
 #endif

+static int
+mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase)
+{
+	if ((MptDriverClass[index] == MPTSPI_DRIVER &&
+	     ioc->bus_type != SPI) ||
+	    (MptDriverClass[index] == MPTFC_DRIVER &&
+	     ioc->bus_type != FC) ||
+	    (MptDriverClass[index] == MPTSAS_DRIVER &&
+	     ioc->bus_type != SAS))
+		/* make sure we only call the relevant reset handler
+		 * for the bus */
+		return 0;
+	return (MptResetHandlers[index])(ioc, reset_phase);
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
 *	mpt_do_ioc_recovery - Initialize or recover MPT adapter.
@ -1885,14 +1900,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			if ((ret == 0) && MptResetHandlers[ii]) {
 				dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n",
 						ioc->name, ii));
-				rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET);
+				rc += mpt_signal_reset(ii, ioc, MPT_IOC_POST_RESET);
 				handlers++;
 			}

 			if (alt_ioc_ready && MptResetHandlers[ii]) {
 				drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
 						ioc->name, ioc->alt_ioc->name, ii));
-				rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
+				rc += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_POST_RESET);
 				handlers++;
 			}
 		}
@ -3267,11 +3282,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 				if (MptResetHandlers[ii]) {
 					dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n",
 							ioc->name, ii));
-					r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET);
+					r += mpt_signal_reset(ii, ioc, MPT_IOC_PRE_RESET);
 					if (ioc->alt_ioc) {
 						dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n",
 								ioc->name, ioc->alt_ioc->name, ii));
-						r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET);
+						r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_PRE_RESET);
 					}
 				}
 			}
@ -5706,11 +5721,11 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 			if (MptResetHandlers[ii]) {
 				dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n",
 						ioc->name, ii));
-				r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET);
+				r += mpt_signal_reset(ii, ioc, MPT_IOC_SETUP_RESET);
 				if (ioc->alt_ioc) {
 					dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n",
 							ioc->name, ioc->alt_ioc->name, ii));
-					r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET);
+					r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
 				}
 			}
 		}
--- a/Показать больше
+++ b/Показать больше