Merge remote-tracking branch 'regulator/topic/pwm' into regulator-drivers
Conflicts: drivers/regulator/Kconfig
This commit is contained in:
Коммит
d1c3f7ca15
|
@ -0,0 +1,27 @@
|
||||||
|
pwm regulator bindings
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible: Should be "pwm-regulator"
|
||||||
|
- pwms: OF device-tree PWM specification (see PWM binding pwm.txt)
|
||||||
|
- voltage-table: voltage and duty table, include 2 members in each set of
|
||||||
|
brackets, first one is voltage(unit: uv), the next is duty(unit: percent)
|
||||||
|
|
||||||
|
Any property defined as part of the core regulator binding defined in
|
||||||
|
regulator.txt can also be used.
|
||||||
|
|
||||||
|
Example:
|
||||||
|
pwm_regulator {
|
||||||
|
compatible = "pwm-regulator;
|
||||||
|
pwms = <&pwm1 0 8448 0>;
|
||||||
|
|
||||||
|
voltage-table = <1114000 0>,
|
||||||
|
<1095000 10>,
|
||||||
|
<1076000 20>,
|
||||||
|
<1056000 30>,
|
||||||
|
<1036000 40>,
|
||||||
|
<1016000 50>;
|
||||||
|
|
||||||
|
regulator-min-microvolt = <1016000>;
|
||||||
|
regulator-max-microvolt = <1114000>;
|
||||||
|
regulator-name = "vdd_logic";
|
||||||
|
};
|
|
@ -449,6 +449,13 @@ config REGULATOR_PFUZE100
|
||||||
Say y here to support the regulators found on the Freescale
|
Say y here to support the regulators found on the Freescale
|
||||||
PFUZE100/PFUZE200 PMIC.
|
PFUZE100/PFUZE200 PMIC.
|
||||||
|
|
||||||
|
config REGULATOR_PWM
|
||||||
|
tristate "PWM voltage regulator"
|
||||||
|
depends on PWM
|
||||||
|
help
|
||||||
|
This driver supports PWM controlled voltage regulators. PWM
|
||||||
|
duty cycle can increase or decrease the voltage.
|
||||||
|
|
||||||
config REGULATOR_QCOM_RPM
|
config REGULATOR_QCOM_RPM
|
||||||
tristate "Qualcomm RPM regulator driver"
|
tristate "Qualcomm RPM regulator driver"
|
||||||
depends on MFD_QCOM_RPM
|
depends on MFD_QCOM_RPM
|
||||||
|
@ -495,12 +502,6 @@ config REGULATOR_S5M8767
|
||||||
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
|
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
|
||||||
supports DVS mode with 8bits of output voltage control.
|
supports DVS mode with 8bits of output voltage control.
|
||||||
|
|
||||||
config REGULATOR_ST_PWM
|
|
||||||
tristate "STMicroelectronics PWM voltage regulator"
|
|
||||||
depends on ARCH_STI
|
|
||||||
help
|
|
||||||
This driver supports ST's PWM controlled voltage regulators.
|
|
||||||
|
|
||||||
config REGULATOR_TI_ABB
|
config REGULATOR_TI_ABB
|
||||||
tristate "TI Adaptive Body Bias on-chip LDO"
|
tristate "TI Adaptive Body Bias on-chip LDO"
|
||||||
depends on ARCH_OMAP
|
depends on ARCH_OMAP
|
||||||
|
|
|
@ -58,6 +58,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
|
||||||
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
|
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
|
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
|
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
|
||||||
|
obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
|
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
|
obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
|
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
|
||||||
|
@ -66,7 +67,6 @@ obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
|
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
|
||||||
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
|
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
|
||||||
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
|
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
|
||||||
obj-$(CONFIG_REGULATOR_ST_PWM) += st-pwm.o
|
|
||||||
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
|
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
|
||||||
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
|
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
|
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
|
||||||
|
|
|
@ -0,0 +1,197 @@
|
||||||
|
/*
|
||||||
|
* Regulator driver for PWM Regulators
|
||||||
|
*
|
||||||
|
* Copyright (C) 2014 - STMicroelectronics Inc.
|
||||||
|
*
|
||||||
|
* Author: Lee Jones <lee.jones@linaro.org>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/err.h>
|
||||||
|
#include <linux/regulator/driver.h>
|
||||||
|
#include <linux/regulator/machine.h>
|
||||||
|
#include <linux/regulator/of_regulator.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
#include <linux/of_device.h>
|
||||||
|
#include <linux/pwm.h>
|
||||||
|
|
||||||
|
struct pwm_regulator_data {
|
||||||
|
struct regulator_desc desc;
|
||||||
|
struct pwm_voltages *duty_cycle_table;
|
||||||
|
struct pwm_device *pwm;
|
||||||
|
bool enabled;
|
||||||
|
int state;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct pwm_voltages {
|
||||||
|
unsigned int uV;
|
||||||
|
unsigned int dutycycle;
|
||||||
|
};
|
||||||
|
|
||||||
|
static int pwm_regulator_get_voltage_sel(struct regulator_dev *dev)
|
||||||
|
{
|
||||||
|
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
|
||||||
|
|
||||||
|
return drvdata->state;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
|
||||||
|
unsigned selector)
|
||||||
|
{
|
||||||
|
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
|
||||||
|
unsigned int pwm_reg_period;
|
||||||
|
int dutycycle;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
pwm_reg_period = pwm_get_period(drvdata->pwm);
|
||||||
|
|
||||||
|
dutycycle = (pwm_reg_period *
|
||||||
|
drvdata->duty_cycle_table[selector].dutycycle) / 100;
|
||||||
|
|
||||||
|
ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(&dev->dev, "Failed to configure PWM\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
drvdata->state = selector;
|
||||||
|
|
||||||
|
if (!drvdata->enabled) {
|
||||||
|
ret = pwm_enable(drvdata->pwm);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(&dev->dev, "Failed to enable PWM\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
drvdata->enabled = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int pwm_regulator_list_voltage(struct regulator_dev *dev,
|
||||||
|
unsigned selector)
|
||||||
|
{
|
||||||
|
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
|
||||||
|
|
||||||
|
if (selector >= drvdata->desc.n_voltages)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
return drvdata->duty_cycle_table[selector].uV;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct regulator_ops pwm_regulator_voltage_ops = {
|
||||||
|
.set_voltage_sel = pwm_regulator_set_voltage_sel,
|
||||||
|
.get_voltage_sel = pwm_regulator_get_voltage_sel,
|
||||||
|
.list_voltage = pwm_regulator_list_voltage,
|
||||||
|
.map_voltage = regulator_map_voltage_iterate,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct regulator_desc pwm_regulator_desc = {
|
||||||
|
.name = "pwm-regulator",
|
||||||
|
.ops = &pwm_regulator_voltage_ops,
|
||||||
|
.type = REGULATOR_VOLTAGE,
|
||||||
|
.owner = THIS_MODULE,
|
||||||
|
.supply_name = "pwm",
|
||||||
|
};
|
||||||
|
|
||||||
|
static int pwm_regulator_probe(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct pwm_regulator_data *drvdata;
|
||||||
|
struct property *prop;
|
||||||
|
struct regulator_dev *regulator;
|
||||||
|
struct regulator_config config = { };
|
||||||
|
struct device_node *np = pdev->dev.of_node;
|
||||||
|
int length, ret;
|
||||||
|
|
||||||
|
if (!np) {
|
||||||
|
dev_err(&pdev->dev, "Device Tree node missing\n");
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
|
||||||
|
if (!drvdata)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(pwm_regulator_desc));
|
||||||
|
|
||||||
|
/* determine the number of voltage-table */
|
||||||
|
prop = of_find_property(np, "voltage-table", &length);
|
||||||
|
if (!prop) {
|
||||||
|
dev_err(&pdev->dev, "No voltage-table\n");
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
if ((length < sizeof(*drvdata->duty_cycle_table)) ||
|
||||||
|
(length % sizeof(*drvdata->duty_cycle_table))) {
|
||||||
|
dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
|
||||||
|
length);
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
drvdata->desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
|
||||||
|
|
||||||
|
drvdata->duty_cycle_table = devm_kzalloc(&pdev->dev,
|
||||||
|
length, GFP_KERNEL);
|
||||||
|
if (!drvdata->duty_cycle_table)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
/* read voltage table from DT property */
|
||||||
|
ret = of_property_read_u32_array(np, "voltage-table",
|
||||||
|
(u32 *)drvdata->duty_cycle_table,
|
||||||
|
length / sizeof(u32));
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(&pdev->dev, "read voltage-table failed\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
config.init_data = of_get_regulator_init_data(&pdev->dev, np);
|
||||||
|
if (!config.init_data)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
config.of_node = np;
|
||||||
|
config.dev = &pdev->dev;
|
||||||
|
config.driver_data = drvdata;
|
||||||
|
|
||||||
|
drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
|
||||||
|
if (IS_ERR(drvdata->pwm)) {
|
||||||
|
dev_err(&pdev->dev, "Failed to get PWM\n");
|
||||||
|
return PTR_ERR(drvdata->pwm);
|
||||||
|
}
|
||||||
|
|
||||||
|
regulator = devm_regulator_register(&pdev->dev,
|
||||||
|
&drvdata->desc, &config);
|
||||||
|
if (IS_ERR(regulator)) {
|
||||||
|
dev_err(&pdev->dev, "Failed to register regulator %s\n",
|
||||||
|
drvdata->desc.name);
|
||||||
|
return PTR_ERR(regulator);
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct of_device_id pwm_of_match[] = {
|
||||||
|
{ .compatible = "pwm-regulator" },
|
||||||
|
{ },
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, pwm_of_match);
|
||||||
|
|
||||||
|
static struct platform_driver pwm_regulator_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = "pwm-regulator",
|
||||||
|
.owner = THIS_MODULE,
|
||||||
|
.of_match_table = of_match_ptr(pwm_of_match),
|
||||||
|
},
|
||||||
|
.probe = pwm_regulator_probe,
|
||||||
|
};
|
||||||
|
|
||||||
|
module_platform_driver(pwm_regulator_driver);
|
||||||
|
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
|
MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>");
|
||||||
|
MODULE_DESCRIPTION("PWM Regulator Driver");
|
||||||
|
MODULE_ALIAS("platform:pwm-regulator");
|
|
@ -1,190 +0,0 @@
|
||||||
/*
|
|
||||||
* Regulator driver for ST's PWM Regulators
|
|
||||||
*
|
|
||||||
* Copyright (C) 2014 - STMicroelectronics Inc.
|
|
||||||
*
|
|
||||||
* Author: Lee Jones <lee.jones@linaro.org>
|
|
||||||
*
|
|
||||||
* This program is free software; you can redistribute it and/or modify
|
|
||||||
* it under the terms of the GNU General Public License version 2 as
|
|
||||||
* published by the Free Software Foundation.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <linux/module.h>
|
|
||||||
#include <linux/init.h>
|
|
||||||
#include <linux/err.h>
|
|
||||||
#include <linux/regulator/driver.h>
|
|
||||||
#include <linux/regulator/machine.h>
|
|
||||||
#include <linux/regulator/of_regulator.h>
|
|
||||||
#include <linux/of.h>
|
|
||||||
#include <linux/of_device.h>
|
|
||||||
#include <linux/pwm.h>
|
|
||||||
|
|
||||||
#define ST_PWM_REG_PERIOD 8448
|
|
||||||
|
|
||||||
struct st_pwm_regulator_pdata {
|
|
||||||
const struct regulator_desc *desc;
|
|
||||||
struct st_pwm_voltages *duty_cycle_table;
|
|
||||||
};
|
|
||||||
|
|
||||||
struct st_pwm_regulator_data {
|
|
||||||
const struct st_pwm_regulator_pdata *pdata;
|
|
||||||
struct pwm_device *pwm;
|
|
||||||
bool enabled;
|
|
||||||
int state;
|
|
||||||
};
|
|
||||||
|
|
||||||
struct st_pwm_voltages {
|
|
||||||
unsigned int uV;
|
|
||||||
unsigned int dutycycle;
|
|
||||||
};
|
|
||||||
|
|
||||||
static int st_pwm_regulator_get_voltage_sel(struct regulator_dev *dev)
|
|
||||||
{
|
|
||||||
struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
|
|
||||||
|
|
||||||
return drvdata->state;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int st_pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
|
|
||||||
unsigned selector)
|
|
||||||
{
|
|
||||||
struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
|
|
||||||
int dutycycle;
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
dutycycle = (ST_PWM_REG_PERIOD / 100) *
|
|
||||||
drvdata->pdata->duty_cycle_table[selector].dutycycle;
|
|
||||||
|
|
||||||
ret = pwm_config(drvdata->pwm, dutycycle, ST_PWM_REG_PERIOD);
|
|
||||||
if (ret) {
|
|
||||||
dev_err(&dev->dev, "Failed to configure PWM\n");
|
|
||||||
return ret;
|
|
||||||
}
|
|
||||||
|
|
||||||
drvdata->state = selector;
|
|
||||||
|
|
||||||
if (!drvdata->enabled) {
|
|
||||||
ret = pwm_enable(drvdata->pwm);
|
|
||||||
if (ret) {
|
|
||||||
dev_err(&dev->dev, "Failed to enable PWM\n");
|
|
||||||
return ret;
|
|
||||||
}
|
|
||||||
drvdata->enabled = true;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int st_pwm_regulator_list_voltage(struct regulator_dev *dev,
|
|
||||||
unsigned selector)
|
|
||||||
{
|
|
||||||
struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
|
|
||||||
|
|
||||||
if (selector >= dev->desc->n_voltages)
|
|
||||||
return -EINVAL;
|
|
||||||
|
|
||||||
return drvdata->pdata->duty_cycle_table[selector].uV;
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct regulator_ops st_pwm_regulator_voltage_ops = {
|
|
||||||
.set_voltage_sel = st_pwm_regulator_set_voltage_sel,
|
|
||||||
.get_voltage_sel = st_pwm_regulator_get_voltage_sel,
|
|
||||||
.list_voltage = st_pwm_regulator_list_voltage,
|
|
||||||
.map_voltage = regulator_map_voltage_iterate,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct st_pwm_voltages b2105_duty_cycle_table[] = {
|
|
||||||
{ .uV = 1114000, .dutycycle = 0, },
|
|
||||||
{ .uV = 1095000, .dutycycle = 10, },
|
|
||||||
{ .uV = 1076000, .dutycycle = 20, },
|
|
||||||
{ .uV = 1056000, .dutycycle = 30, },
|
|
||||||
{ .uV = 1036000, .dutycycle = 40, },
|
|
||||||
{ .uV = 1016000, .dutycycle = 50, },
|
|
||||||
/* WARNING: Values above 50% duty-cycle cause boot failures. */
|
|
||||||
};
|
|
||||||
|
|
||||||
static const struct regulator_desc b2105_desc = {
|
|
||||||
.name = "b2105-pwm-regulator",
|
|
||||||
.ops = &st_pwm_regulator_voltage_ops,
|
|
||||||
.type = REGULATOR_VOLTAGE,
|
|
||||||
.owner = THIS_MODULE,
|
|
||||||
.n_voltages = ARRAY_SIZE(b2105_duty_cycle_table),
|
|
||||||
.supply_name = "pwm",
|
|
||||||
};
|
|
||||||
|
|
||||||
static const struct st_pwm_regulator_pdata b2105_info = {
|
|
||||||
.desc = &b2105_desc,
|
|
||||||
.duty_cycle_table = b2105_duty_cycle_table,
|
|
||||||
};
|
|
||||||
|
|
||||||
static const struct of_device_id st_pwm_of_match[] = {
|
|
||||||
{ .compatible = "st,b2105-pwm-regulator", .data = &b2105_info, },
|
|
||||||
{ },
|
|
||||||
};
|
|
||||||
MODULE_DEVICE_TABLE(of, st_pwm_of_match);
|
|
||||||
|
|
||||||
static int st_pwm_regulator_probe(struct platform_device *pdev)
|
|
||||||
{
|
|
||||||
struct st_pwm_regulator_data *drvdata;
|
|
||||||
struct regulator_dev *regulator;
|
|
||||||
struct regulator_config config = { };
|
|
||||||
struct device_node *np = pdev->dev.of_node;
|
|
||||||
const struct of_device_id *of_match;
|
|
||||||
|
|
||||||
if (!np) {
|
|
||||||
dev_err(&pdev->dev, "Device Tree node missing\n");
|
|
||||||
return -EINVAL;
|
|
||||||
}
|
|
||||||
|
|
||||||
drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
|
|
||||||
if (!drvdata)
|
|
||||||
return -ENOMEM;
|
|
||||||
|
|
||||||
of_match = of_match_device(st_pwm_of_match, &pdev->dev);
|
|
||||||
if (!of_match) {
|
|
||||||
dev_err(&pdev->dev, "failed to match of device\n");
|
|
||||||
return -ENODEV;
|
|
||||||
}
|
|
||||||
drvdata->pdata = of_match->data;
|
|
||||||
|
|
||||||
config.init_data = of_get_regulator_init_data(&pdev->dev, np);
|
|
||||||
if (!config.init_data)
|
|
||||||
return -ENOMEM;
|
|
||||||
|
|
||||||
config.of_node = np;
|
|
||||||
config.dev = &pdev->dev;
|
|
||||||
config.driver_data = drvdata;
|
|
||||||
|
|
||||||
drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
|
|
||||||
if (IS_ERR(drvdata->pwm)) {
|
|
||||||
dev_err(&pdev->dev, "Failed to get PWM\n");
|
|
||||||
return PTR_ERR(drvdata->pwm);
|
|
||||||
}
|
|
||||||
|
|
||||||
regulator = devm_regulator_register(&pdev->dev,
|
|
||||||
drvdata->pdata->desc, &config);
|
|
||||||
if (IS_ERR(regulator)) {
|
|
||||||
dev_err(&pdev->dev, "Failed to register regulator %s\n",
|
|
||||||
drvdata->pdata->desc->name);
|
|
||||||
return PTR_ERR(regulator);
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct platform_driver st_pwm_regulator_driver = {
|
|
||||||
.driver = {
|
|
||||||
.name = "st-pwm-regulator",
|
|
||||||
.owner = THIS_MODULE,
|
|
||||||
.of_match_table = of_match_ptr(st_pwm_of_match),
|
|
||||||
},
|
|
||||||
.probe = st_pwm_regulator_probe,
|
|
||||||
};
|
|
||||||
|
|
||||||
module_platform_driver(st_pwm_regulator_driver);
|
|
||||||
|
|
||||||
MODULE_LICENSE("GPL");
|
|
||||||
MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>");
|
|
||||||
MODULE_DESCRIPTION("ST PWM Regulator Driver");
|
|
||||||
MODULE_ALIAS("platform:st_pwm-regulator");
|
|
Загрузка…
Ссылка в новой задаче