From d206f66177ab7cd69d79c7e01b43f45d935f43dd Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 27 Nov 2014 13:01:59 -0200 Subject: [PATCH] ASoC: mxs-sgtl5000: Remove MCLK restriction According to the sgtl5000 datasheet the MCLK frequency range restriction of 8 to 27 MHz only applies when the PLL is used - synchronous SYS_MCLK input mode. mxs-sgtl5000 machine sets the codec as slave, and mx28 generates MCLK in the range of 256*fs, 384*fs or 512*fs, which is called asynchronous SYS_MCLK input. In asynchronous SYS_MCLK we cannot have the 8 to 27 MHz check because if we want to play a 8KHz sample rate track, with a MCLK of 8k * 512 = 4.096MHz the current check would return -EINVAL, which is not correct. Remove the 8 to 27MHz frequency check, since this only applies to the synchronous SYS_MCLK input case. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-sgtl5000.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c index 61822cc53bd3..3bba6cfe4f29 100644 --- a/sound/soc/mxs/mxs-sgtl5000.c +++ b/sound/soc/mxs/mxs-sgtl5000.c @@ -49,13 +49,6 @@ static int mxs_sgtl5000_hw_params(struct snd_pcm_substream *substream, break; } - /* Sgtl5000 sysclk should be >= 8MHz and <= 27M */ - if (mclk < 8000000 || mclk > 27000000) { - dev_err(codec_dai->dev, "Invalid mclk frequency: %u.%03uMHz\n", - mclk / 1000000, mclk / 1000 % 1000); - return -EINVAL; - } - /* Set SGTL5000's SYSCLK (provided by SAIF MCLK) */ ret = snd_soc_dai_set_sysclk(codec_dai, SGTL5000_SYSCLK, mclk, 0); if (ret) {