usb: dwc3: Add Exynos Specific Glue layer

Adds Exynos Specific Glue layer to support USB peripherals
on Samsung Exynos5 chips.

[ balbi@ti.com : prevent compilation of Exynos glue layer
	on platforms which don't provide clk API implementation ]

Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Anton Tikhomirov 2012-02-15 17:04:56 +09:00 коммит произвёл Felipe Balbi
Родитель f6bafc6a1c
Коммит d28a9689c9
3 изменённых файлов: 188 добавлений и 0 удалений

Просмотреть файл

@ -28,6 +28,19 @@ endif
obj-$(CONFIG_USB_DWC3) += dwc3-omap.o
##
# REVISIT Samsung Exynos platform needs the clk API which isn't
# defined on all architectures. If we allow dwc3-exynos.c compile
# always we will fail the linking phase on those architectures
# which don't provide clk api implementation and that's unnaceptable.
#
# When Samsung's platform start supporting pm_runtime, this check
# for HAVE_CLK should be removed.
##
ifneq ($(CONFIG_HAVE_CLK),)
obj-$(CONFIG_USB_DWC3) += dwc3-exynos.o
endif
ifneq ($(CONFIG_PCI),)
obj-$(CONFIG_USB_DWC3) += dwc3-pci.o
endif

Просмотреть файл

@ -0,0 +1,151 @@
/**
* dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dwc3-exynos.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/clk.h>
#include "core.h"
struct dwc3_exynos {
struct platform_device *dwc3;
struct device *dev;
struct clk *clk;
};
static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
{
struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
struct platform_device *dwc3;
struct dwc3_exynos *exynos;
struct clk *clk;
int devid;
int ret = -ENOMEM;
exynos = kzalloc(sizeof(*exynos), GFP_KERNEL);
if (!exynos) {
dev_err(&pdev->dev, "not enough memory\n");
goto err0;
}
platform_set_drvdata(pdev, exynos);
devid = dwc3_get_device_id();
if (devid < 0)
goto err1;
dwc3 = platform_device_alloc("dwc3", devid);
if (!dwc3) {
dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
goto err2;
}
clk = clk_get(&pdev->dev, "usbdrd30");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "couldn't get clock\n");
ret = -EINVAL;
goto err3;
}
dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask);
dwc3->dev.parent = &pdev->dev;
dwc3->dev.dma_mask = pdev->dev.dma_mask;
dwc3->dev.dma_parms = pdev->dev.dma_parms;
exynos->dwc3 = dwc3;
exynos->dev = &pdev->dev;
exynos->clk = clk;
clk_enable(exynos->clk);
/* PHY initialization */
if (!pdata) {
dev_dbg(&pdev->dev, "missing platform data\n");
} else {
if (pdata->phy_init)
pdata->phy_init(pdev, pdata->phy_type);
}
ret = platform_device_add_resources(dwc3, pdev->resource,
pdev->num_resources);
if (ret) {
dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
goto err4;
}
ret = platform_device_add(dwc3);
if (ret) {
dev_err(&pdev->dev, "failed to register dwc3 device\n");
goto err4;
}
return 0;
err4:
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, pdata->phy_type);
clk_disable(clk);
clk_put(clk);
err3:
platform_device_put(dwc3);
err2:
dwc3_put_device_id(devid);
err1:
kfree(exynos);
err0:
return ret;
}
static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
{
struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
platform_device_unregister(exynos->dwc3);
dwc3_put_device_id(exynos->dwc3->id);
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, pdata->phy_type);
clk_disable(exynos->clk);
clk_put(exynos->clk);
kfree(exynos);
return 0;
}
static struct platform_driver dwc3_exynos_driver = {
.probe = dwc3_exynos_probe,
.remove = __devexit_p(dwc3_exynos_remove),
.driver = {
.name = "exynos-dwc3",
},
};
module_platform_driver(dwc3_exynos_driver);
MODULE_ALIAS("platform:exynos-dwc3");
MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer");

Просмотреть файл

@ -0,0 +1,24 @@
/**
* dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _DWC3_EXYNOS_H_
#define _DWC3_EXYNOS_H_
struct dwc3_exynos_data {
int phy_type;
int (*phy_init)(struct platform_device *pdev, int type);
int (*phy_exit)(struct platform_device *pdev, int type);
};
#endif /* _DWC3_EXYNOS_H_ */