microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

regulator: arizona-micsupp: Correct wm5110 voltage selection 

wm5110 provides different voltage configurations than the other Arizona
parts, this patch adds support for this into the regulator driver. Also
fixup the default for the configuration register for wm5110.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org (v3.12)
This commit is contained in:
Charles Keepax 2013-11-15 13:48:23 +00:00 коммит произвёл Mark Brown
Родитель d4d5cef649
Коммит d2e7491e24
1 изменённых файлов: 52 добавлений и 2 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

54
drivers/regulator/arizona-micsupp.c
Просмотреть файл

@ -174,6 +174,33 @@ static const struct regulator_desc arizona_micsupp = {
.owner = THIS_MODULE,
};
static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000),
REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
};
static const struct regulator_desc arizona_micsupp_ext = {
.name = "MICVDD",
.supply_name = "CPVDD",
.type = REGULATOR_VOLTAGE,
.n_voltages = 40,
.ops = &arizona_micsupp_ops,
.vsel_reg = ARIZONA_LDO2_CONTROL_1,
.vsel_mask = ARIZONA_LDO2_VSEL_MASK,
.enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
.enable_mask = ARIZONA_CPMIC_ENA,
.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
.bypass_mask = ARIZONA_CPMIC_BYPASS,
.linear_ranges = arizona_micsupp_ext_ranges,
.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
.enable_time = 3000,
.owner = THIS_MODULE,
};
static const struct regulator_init_data arizona_micsupp_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
@ -186,9 +213,22 @@ static const struct regulator_init_data arizona_micsupp_default = {
.num_consumer_supplies = 1,
};
static const struct regulator_init_data arizona_micsupp_ext_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_BYPASS,
.min_uV = 900000,
.max_uV = 3300000,
},
.num_consumer_supplies = 1,
};
static int arizona_micsupp_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_micsupp *micsupp;
int ret;
@ -207,7 +247,17 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
* default init_data for it. This will be overridden with
* platform data if provided.
*/
micsupp->init_data = arizona_micsupp_default;
switch (arizona->type) {
case WM5110:
desc = &arizona_micsupp_ext;
micsupp->init_data = arizona_micsupp_ext_default;
break;
default:
desc = &arizona_micsupp;
micsupp->init_data = arizona_micsupp_default;
break;
}
micsupp->init_data.consumer_supplies = &micsupp->supply;
micsupp->supply.supply = "MICVDD";
micsupp->supply.dev_name = dev_name(arizona->dev);
@ -226,7 +276,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
ARIZONA_CPMIC_BYPASS, 0);
micsupp->regulator = devm_regulator_register(&pdev->dev,
&arizona_micsupp,
desc,
&config);
if (IS_ERR(micsupp->regulator)) {
ret = PTR_ERR(micsupp->regulator);