mtd: onenand: use mtd_ooblayout_xxx() helpers where appropriate

The mtd_ooblayout_xxx() helper functions have been added to avoid direct
accesses to the ecclayout field, and thus ease for future reworks.
Use these helpers in all places where the oobfree[] and eccpos[] arrays
where directly accessed.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drivers/mtd/onenand/onenand_base.c

@@ -1024,34 +1024,15 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col
 				int thislen)
 {
 	struct onenand_chip *this = mtd->priv;
-	struct nand_oobfree *free;
-	int readcol = column;
-	int readend = column + thislen;
-	int lastgap = 0;
-	unsigned int i;
-	uint8_t *oob_buf = this->oob_buf;
+	int ret;
+
+	this->read_bufferram(mtd, ONENAND_SPARERAM, this->oob_buf, 0,
+			     mtd->oobsize);
+	ret = mtd_ooblayout_get_databytes(mtd, buf, this->oob_buf,
+					  column, thislen);
+	if (ret)
+		return ret;
 
-	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
-		if (readcol >= lastgap)
-			readcol += free->offset - lastgap;
-		if (readend >= lastgap)
-			readend += free->offset - lastgap;
-		lastgap = free->offset + free->length;
-	}
-	this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
-	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
-		int free_end = free->offset + free->length;
-		if (free->offset < readend && free_end > readcol) {
-			int st = max_t(int,free->offset,readcol);
-			int ed = min_t(int,free_end,readend);
-			int n = ed - st;
-			memcpy(buf, oob_buf + st, n);
-			buf += n;
-		} else if (column == 0)
-			break;
-	}
 	return 0;
 }
 
@@ -1808,34 +1789,7 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
 static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
 				  const u_char *buf, int column, int thislen)
 {
-	struct onenand_chip *this = mtd->priv;
-	struct nand_oobfree *free;
-	int writecol = column;
-	int writeend = column + thislen;
-	int lastgap = 0;
-	unsigned int i;
-
-	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
-		if (writecol >= lastgap)
-			writecol += free->offset - lastgap;
-		if (writeend >= lastgap)
-			writeend += free->offset - lastgap;
-		lastgap = free->offset + free->length;
-	}
-	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
-		int free_end = free->offset + free->length;
-		if (free->offset < writeend && free_end > writecol) {
-			int st = max_t(int,free->offset,writecol);
-			int ed = min_t(int,free_end,writeend);
-			int n = ed - st;
-			memcpy(oob_buf + st, buf, n);
-			buf += n;
-		} else if (column == 0)
-			break;
-	}
-	return 0;
+	return mtd_ooblayout_set_databytes(mtd, buf, oob_buf, column, thislen);
 }
 
 /**
@@ -4037,10 +3991,11 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	 * The number of bytes available for a client to place data into
 	 * the out of band area
 	 */
-	mtd->oobavail = 0;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
-	    this->ecclayout->oobfree[i].length; i++)
-		mtd->oobavail += this->ecclayout->oobfree[i].length;
+	ret = mtd_ooblayout_count_freebytes(mtd);
+	if (ret < 0)
+		ret = 0;
+
+	mtd->oobavail = ret;
 
 	mtd->ecclayout = this->ecclayout;
 	mtd->ecc_strength = 1;