microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: Merge for-2635-4/s5pc1xx-removal 

Merge branch 'for-2635-4/s5pc1xx-removal' into for-2635-4/partial1
This commit is contained in:
Ben Dooks 2010-05-20 18:51:31 +09:00
Родитель 0df04f820b a73e3e6f8f
Коммит d48562abe2
38 изменённых файлов: 371 добавлений и 3244 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

9
arch/arm/Kconfig
Просмотреть файл

@ -699,14 +699,14 @@ config ARCH_S5P6442
help
Samsung S5P6442 CPU based systems
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
config ARCH_S5PC100
bool "Samsung S5PC100"
select GENERIC_GPIO
select HAVE_CLK
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
help
Samsung S5PC1XX series based systems
Samsung S5PC100 series based systems
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
@ -890,7 +890,6 @@ source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
@ -909,9 +908,7 @@ source "arch/arm/mach-s5p6440/Kconfig"
source "arch/arm/mach-s5p6442/Kconfig"
if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif
source "arch/arm/mach-s5pv210/Kconfig"

3
arch/arm/Makefile
Просмотреть файл

@ -167,7 +167,7 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
@ -192,7 +192,6 @@ plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung
plat-$(CONFIG_PLAT_S5P) := s5p samsung
ifeq ($(CONFIG_ARCH_EBSA110),y)

25
arch/arm/mach-s5pc100/Kconfig
Просмотреть файл

@ -5,10 +5,12 @@
# Configuration options for the S5PC100 CPU
if ARCH_S5PC100
config CPU_S5PC100
bool
select CPU_S5PC100_INIT
select CPU_S5PC100_CLOCK
select PLAT_S5P
select S5P_EXT_INT
help
Enable S5PC100 CPU support
@ -17,17 +19,22 @@ config S5PC100_SETUP_FB_24BPP
help
Common setup code for S5PC1XX with an 24bpp RGB display helper.
config S5PC100_SETUP_SDHCI
bool
select S5PC1XX_SETUP_SDHCI_GPIO
help
Internal helper functions for S5PC100 based SDHCI systems
config S5PC100_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config S5PC100_SETUP_SDHCI
bool
select S5PC100_SETUP_SDHCI_GPIO
help
Internal helper functions for S5PC100 based SDHCI systems
config S5PC100_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
@ -41,3 +48,5 @@ config MACH_SMDKC100
select S5PC100_SETUP_SDHCI
help
Machine support for the Samsung SMDKC100
endif

6
arch/arm/mach-s5pc100/Makefile
Просмотреть файл

@ -11,14 +11,16 @@ obj- :=
# Core support for S5PC100 system
obj-$(CONFIG_CPU_S5PC100) += cpu.o gpiolib.o
obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o irq-gpio.o
obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
# Helper and device support
obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# machine support
obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o

56
arch/arm/mach-s5pc100/cpu.c
Просмотреть файл

@ -22,47 +22,53 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/proc-fns.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <plat/regs-power.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/sdhci.h>
#include <plat/s5pc100.h>
/* Initial IO mappings */
static struct map_desc s5pc100_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)VA_VIC2,
.pfn = __phys_to_pfn(S5PC100_PA_VIC2),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC100_VA_OTHERS,
.pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
.length = SZ_4K,
.type = MT_DEVICE,
}
};
static void s5pc100_idle(void)
{
unsigned long tmp;
if (!need_resched())
cpu_do_idle();
tmp = __raw_readl(S5PC100_PWR_CFG);
tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
__raw_writel(tmp, S5PC100_PWR_CFG);
tmp = __raw_readl(S5PC100_OTHERS);
tmp |= S5PC100_PMU_INT_DISABLE;
__raw_writel(tmp, S5PC100_OTHERS);
cpu_do_idle();
local_irq_enable();
}
/* s5pc100_map_io
@ -86,22 +92,23 @@ void __init s5pc100_map_io(void)
void __init s5pc100_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s5pc1xx_register_clocks();
s5p_register_clocks(xtal);
s5pc100_register_clocks();
s5pc100_setup_clocks();
}
void __init s5pc100_init_irq(void)
{
u32 vic_valid[] = {~0, ~0, ~0};
u32 vic[] = {~0, ~0, ~0};
/* VIC0, VIC1, and VIC2 are fully populated. */
s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
struct sysdev_class s5pc100_sysclass = {
static struct sysdev_class s5pc100_sysclass = {
.name = "s5pc100-core",
};
@ -118,9 +125,10 @@ core_initcall(s5pc100_core_init);
int __init s5pc100_init(void)
{
printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
printk(KERN_INFO "S5PC100: Initializing architecture\n");
s5pc1xx_idle = s5pc100_idle;
/* set idle function */
pm_idle = s5pc100_idle;
return sysdev_register(&s5pc100_sysdev);
}

36
arch/arm/mach-s5pc100/gpiolib.c
Просмотреть файл

@ -1,10 +1,10 @@
/*
* arch/arm/plat-s5pc1xx/gpiolib.c
* arch/arm/plat-s5pc100/gpiolib.c
*
* Copyright 2009 Samsung Electronics Co
* Kyungmin Park <kyungmin.park@samsung.com>
*
* S5PC1XX - GPIOlib support
* S5PC100 - GPIOlib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -61,13 +61,12 @@
* L3 8 4Bit None
*/
#if 0
static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
{
return S3C_IRQ_GPIO(chip->base + offset);
}
static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
{
int base;
@ -85,7 +84,7 @@ static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
return IRQ_EINT(24 + offset);
return -EINVAL;
}
#endif
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
@ -382,31 +381,30 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
};
/* FIXME move from irq-gpio.c */
extern struct irq_chip s5pc1xx_gpioint;
extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
extern struct irq_chip s5pc100_gpioint;
extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
{
#if 0
/* Interrupt */
if (chip->config == &gpio_cfg) {
int i, irq;
chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
chip->chip.to_irq = s5pc100_gpiolib_to_irq;
for (i = 0; i < chip->chip.ngpio; i++) {
irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
set_irq_chip(irq, &s5pc1xx_gpioint);
set_irq_chip(irq, &s5pc100_gpioint);
set_irq_data(irq, &chip->chip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
} else if (chip->config == &gpio_cfg_eint)
chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
#endif
} else if (chip->config == &gpio_cfg_eint) {
chip->chip.to_irq = s5pc100_gpiolib_to_eint;
}
}
static __init int s5pc1xx_gpiolib_init(void)
static __init int s5pc100_gpiolib_init(void)
{
struct s3c_gpio_chip *chip;
int nr_chips;
@ -419,10 +417,10 @@ static __init int s5pc1xx_gpiolib_init(void)
samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
ARRAY_SIZE(s5pc100_gpio_chips));
#if 0
/* Interrupt */
set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
#endif
set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
return 0;
}
core_initcall(s5pc1xx_gpiolib_init);
core_initcall(s5pc100_gpiolib_init);

6
arch/arm/mach-s5pc100/include/mach/debug-macro.S
Просмотреть файл

@ -22,12 +22,14 @@
* aligned and add in the offset when we load the value here.
*/
.macro addruart, rx, tmp
.macro addruart, rx, rtmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
ldrne \rx, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
/* include the reset of the code which will do the work, we're only

8
arch/arm/mach-s5pc100/include/mach/entry-macro.S
Просмотреть файл

@ -20,7 +20,7 @@
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =S3C_VA_VIC0
ldr \base, =VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
@ -29,18 +29,18 @@
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check the vic0
mov \irqnr, # S3C_IRQ_OFFSET + 31
mov \irqnr, # S5P_IRQ_OFFSET + 31
ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
teq \irqstat, #0
@ otherwise try vic1
addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
addeq \irqnr, \irqnr, #32
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0
@ otherwise try vic2
addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
addeq \irqnr, \irqnr, #32
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0

7
arch/arm/mach-s5pc100/include/mach/gpio.h
Просмотреть файл

@ -146,6 +146,13 @@ enum s5p_gpio_number {
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
#define EINT_MODE S3C_GPIO_SFN(0x2)
#define EINT_GPIO_0(x) S5PC100_GPH0(x)
#define EINT_GPIO_1(x) S5PC100_GPH1(x)
#define EINT_GPIO_2(x) S5PC100_GPH2(x)
#define EINT_GPIO_3(x) S5PC100_GPH3(x)
#include <asm-generic/gpio.h>
#endif /* __ASM_ARCH_GPIO_H */

99
arch/arm/mach-s5pc100/include/mach/irqs.h
Просмотреть файл

@ -11,9 +11,104 @@
#include <plat/irqs.h>
/* LCD */
/* VIC0: system, DMA, timer */
#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
#define IRQ_BATF S5P_IRQ_VIC0(17)
#define IRQ_MDMA S5P_IRQ_VIC0(18)
#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
#define IRQ_WDT S5P_IRQ_VIC0(27)
#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
/* VIC1: ARM, power, memory, connectivity */
#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
#define IRQ_ONENAND S5P_IRQ_VIC1(7)
#define IRQ_NFC S5P_IRQ_VIC1(8)
#define IRQ_CFC S5P_IRQ_VIC1(9)
#define IRQ_UART0 S5P_IRQ_VIC1(10)
#define IRQ_UART1 S5P_IRQ_VIC1(11)
#define IRQ_UART2 S5P_IRQ_VIC1(12)
#define IRQ_UART3 S5P_IRQ_VIC1(13)
#define IRQ_IIC S5P_IRQ_VIC1(14)
#define IRQ_SPI0 S5P_IRQ_VIC1(15)
#define IRQ_SPI1 S5P_IRQ_VIC1(16)
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
#define IRQ_CAN0 S5P_IRQ_VIC1(19)
#define IRQ_CAN1 S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
#define IRQ_OTG S5P_IRQ_VIC1(24)
#define IRQ_MSM S5P_IRQ_VIC1(25)
#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
/* VIC2: multimedia, audio, security */
#define IRQ_LCD0 S5P_IRQ_VIC2(0)
#define IRQ_LCD1 S5P_IRQ_VIC2(1)
#define IRQ_LCD2 S5P_IRQ_VIC2(2)
#define IRQ_LCD3 S5P_IRQ_VIC2(3)
#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
#define IRQ_JPEG S5P_IRQ_VIC2(8)
#define IRQ_2D S5P_IRQ_VIC2(9)
#define IRQ_3D S5P_IRQ_VIC2(10)
#define IRQ_MIXER S5P_IRQ_VIC2(11)
#define IRQ_HDMI S5P_IRQ_VIC2(12)
#define IRQ_IIC1 S5P_IRQ_VIC2(13)
#define IRQ_MFC S5P_IRQ_VIC2(14)
#define IRQ_TVENC S5P_IRQ_VIC2(15)
#define IRQ_I2S0 S5P_IRQ_VIC2(16)
#define IRQ_I2S1 S5P_IRQ_VIC2(17)
#define IRQ_I2S2 S5P_IRQ_VIC2(18)
#define IRQ_AC97 S5P_IRQ_VIC2(19)
#define IRQ_PCM0 S5P_IRQ_VIC2(20)
#define IRQ_PCM1 S5P_IRQ_VIC2(21)
#define IRQ_SPDIF S5P_IRQ_VIC2(22)
#define IRQ_ADC S5P_IRQ_VIC2(23)
#define IRQ_PENDN S5P_IRQ_VIC2(24)
#define IRQ_TC IRQ_PENDN
#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
#define IRQ_CG S5P_IRQ_VIC2(26)
#define IRQ_SEC S5P_IRQ_VIC2(27)
#define IRQ_SECRX S5P_IRQ_VIC2(28)
#define IRQ_SECTX S5P_IRQ_VIC2(29)
#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
#define IRQ_VIC_END S5P_IRQ_VIC2(31)
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
#define IRQ_LCD_VSYNC IRQ_LCD1
#define IRQ_LCD_SYSTEM IRQ_LCD2
#endif /* __ASM_ARCH_IRQ_H */
#endif /* __ASM_ARCH_IRQS_H */

146
arch/arm/mach-s5pc100/include/mach/map.h
Просмотреть файл

@ -3,9 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* Based on mach-s3c6400/include/mach/map.h
*
* S5PC1XX - Memory map definitions
* S5PC100 - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -16,135 +14,59 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
#include <plat/map-s5p.h>
/*
* map-base.h has already defined virtual memory address
* S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s)
* S3C_VA_SYS S3C_ADDR(0x00100000) system control
* S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used)
* S3C_VA_TIMER S3C_ADDR(0x00300000) timer block
* S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog
* S3C_VA_UART S3C_ADDR(0x01000000) UART
*
* S5PC100 specific virtual memory address can be defined here
* S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO
*
*/
/* Chip ID */
#define S5PC100_PA_CHIPID (0xE0000000)
#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID
#define S5PC1XX_VA_CHIPID S3C_VA_SYS
#define S5P_PA_CHIPID S5PC100_PA_CHIPID
/* System */
#define S5PC100_PA_CLK (0xE0100000)
#define S5PC100_PA_CLK_OTHER (0xE0200000)
#define S5PC100_PA_PWR (0xE0108000)
#define S5PC1XX_PA_CLK S5PC100_PA_CLK
#define S5PC1XX_PA_PWR S5PC100_PA_PWR
#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER
#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000)
#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000)
#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000)
#define S5PC100_PA_SYSCON (0xE0100000)
#define S5P_PA_SYSCON S5PC100_PA_SYSCON
#define S5PC100_PA_OTHERS (0xE0200000)
#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
/* GPIO */
#define S5PC100_PA_GPIO (0xE0300000)
#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO
#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000)
#define S5P_PA_GPIO S5PC100_PA_GPIO
/* Interrupt */
#define S5PC100_PA_VIC (0xE4000000)
#define S5PC100_VA_VIC S3C_VA_IRQ
#define S5PC100_PA_VIC_OFFSET 0x100000
#define S5PC100_VA_VIC_OFFSET 0x10000
#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
#define S5PC100_PA_VIC0 (0xE4000000)
#define S5P_PA_VIC0 S5PC100_PA_VIC0
/* DMA */
#define S5PC100_PA_MDMA (0xE8100000)
#define S5PC100_PA_PDMA0 (0xE9000000)
#define S5PC100_PA_PDMA1 (0xE9200000)
#define S5PC100_PA_VIC1 (0xE4100000)
#define S5P_PA_VIC1 S5PC100_PA_VIC1
#define S5PC100_PA_VIC2 (0xE4200000)
#define S5P_PA_VIC2 S5PC100_PA_VIC2
/* Timer */
#define S5PC100_PA_TIMER (0xEA000000)
#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER
#define S5PC1XX_VA_TIMER S3C_VA_TIMER
#define S5P_PA_TIMER S5PC100_PA_TIMER
/* RTC */
#define S5PC100_PA_RTC (0xEA300000)
#define S5PC100_PA_SYSTIMER (0xEA100000)
/* UART */
#define S5PC100_PA_UART (0xEC000000)
#define S5PC1XX_PA_UART S5PC100_PA_UART
#define S5PC1XX_VA_UART S3C_VA_UART
/* I2C */
#define S5PC100_PA_I2C (0xEC100000)
#define S5PC100_PA_I2C1 (0xEC200000)
#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0)
#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400)
#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800)
#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00)
#define S5P_SZ_UART SZ_256
/* USB HS OTG */
#define S5PC100_PA_USB_HSOTG (0xED200000)
#define S5PC100_PA_USB_HSPHY (0xED300000)
#define S5PC100_PA_IIC0 (0xEC100000)
#define S5PC100_PA_IIC1 (0xEC200000)
/* SD/MMC */
#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0)
#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1)
#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2)
/* LCD */
#define S5PC100_PA_FB (0xEE000000)
/* Multimedia */
#define S5PC100_PA_G2D (0xEE800000)
#define S5PC100_PA_JPEG (0xEE500000)
#define S5PC100_PA_ROTATOR (0xEE100000)
#define S5PC100_PA_G3D (0xEF000000)
#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
/* I2S */
#define S5PC100_PA_I2S0 (0xF2000000)
#define S5PC100_PA_I2S1 (0xF2100000)
#define S5PC100_PA_I2S2 (0xF2200000)
/* KEYPAD */
#define S5PC100_PA_KEYPAD (0xF3100000)
/* ADC & TouchScreen */
#define S5PC100_PA_TSADC (0xF3000000)
/* ETC */
#define S5PC100_PA_SDRAM (0x20000000)
#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM
#define S5P_PA_SDRAM S5PC100_PA_SDRAM
/* compatibility defines. */
#define S3C_PA_RTC S5PC100_PA_RTC
/* compatibiltiy defines. */
#define S3C_PA_UART S5PC100_PA_UART
#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0)
#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400)
#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800)
#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00)
#define S3C_VA_UART0 (S3C_VA_UART + 0x0)
#define S3C_VA_UART1 (S3C_VA_UART + 0x400)
#define S3C_VA_UART2 (S3C_VA_UART + 0x800)
#define S3C_VA_UART3 (S3C_VA_UART + 0xC00)
#define S3C_UART_OFFSET 0x400
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#define S3C_PA_IIC S5PC100_PA_IIC0
#define S3C_PA_IIC1 S5PC100_PA_IIC1
#define S3C_PA_FB S5PC100_PA_FB
#define S3C_PA_G2D S5PC100_PA_G2D
#define S3C_PA_G3D S5PC100_PA_G3D
#define S3C_PA_JPEG S5PC100_PA_JPEG
#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000)
#define S3C_PA_IIC S5PC100_PA_I2C
#define S3C_PA_IIC1 S5PC100_PA_I2C1
#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0
#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1
#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2
#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
#define S3C_PA_TSADC S5PC100_PA_TSADC
#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
#endif /* __ASM_ARCH_C100_MAP_H */
#endif /* __ASM_ARCH_MAP_H */

6
arch/arm/mach-s5pc100/include/mach/regs-clock.h
Просмотреть файл

@ -17,6 +17,8 @@
#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x))
#define S5P_APLL_LOCK S5P_CLKREG(0x00)
#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
@ -68,4 +70,8 @@
#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
#define S5PC100_SWRESET_RESETVAL 0xc100
#endif /* __ASM_ARCH_REGS_CLOCK_H */

37
arch/arm/mach-s5pc100/include/mach/regs-gpio.h
Просмотреть файл

@ -1,4 +1,4 @@
/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
@ -12,7 +12,7 @@
#include <mach/map.h>
/* S5PC100 */
#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO
#define S5PC100_GPIO_BASE S5P_VA_GPIO
#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000)
#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020)
#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040)
@ -47,24 +47,29 @@
#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360)
#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380)
#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0)
#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00)
#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68)
#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80)
#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00)
#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4))
/* PDNEN */
#define S5PC100_PDNEN_CFG_PDNEN (1 << 1)
#define S5PC100_PDNEN_CFG_AUTO (0 << 1)
#define S5PC100_PDNEN_POWERDOWN (1 << 0)
#define S5PC100_PDNEN_NORMAL (0 << 0)
#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4))
/* Common part */
/* External interrupt base is same at both s5pc100 and s5pc110 */
#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE)
#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00)
#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4))
#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4))
#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4))
#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40)
#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4))
#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
/* values for S5P_EXTINT0 */
#define S5P_EXTINT_LOWLEV (0x00)
#define S5P_EXTINT_HILEV (0x01)
#define S5P_EXTINT_FALLEDGE (0x02)
#define S5P_EXTINT_RISEEDGE (0x03)
#define S5P_EXTINT_BOTHEDGE (0x04)
#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */

7
arch/arm/mach-s5pc100/include/mach/regs-irq.h
Просмотреть файл

@ -3,7 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX - IRQ register definitions
* S5PC100 - IRQ register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -16,9 +16,4 @@
#include <mach/map.h>
#include <asm/hardware/vic.h>
/* interrupt controller */
#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0))
#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1))
#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2))
#endif /* __ASM_ARCH_REGS_IRQ_H */

9
arch/arm/mach-s5pc100/include/mach/system.h
Просмотреть файл

@ -3,7 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX - system implementation
* S5PC100 - system implementation
*
* Based on mach-s3c6400/include/mach/system.h
*/
@ -13,14 +13,11 @@
#include <linux/io.h>
#include <mach/map.h>
#include <plat/regs-clock.h>
void (*s5pc1xx_idle)(void);
#include <mach/regs-clock.h>
static void arch_idle(void)
{
if (s5pc1xx_idle)
s5pc1xx_idle();
/* nothing here yet */
}
static void arch_reset(char mode, const char *cmd)

4
arch/arm/mach-s5pc100/include/mach/tick.h
Просмотреть файл

@ -20,8 +20,8 @@
*/
static inline u32 s3c24xx_ostimer_pending(void)
{
u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0));
u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
}
#define TICK_MAX (0xffffffff)

7
arch/arm/plat-s5pc1xx/s5pc100-init.c → arch/arm/mach-s5pc100/init.c
Просмотреть файл

@ -1,9 +1,8 @@
/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC100 - CPU initialisation (common with other S5PC1XX chips)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -19,9 +18,7 @@
#include <plat/s5pc100.h>
/* uart registration process */
void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */
s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}

78
arch/arm/plat-s5pc1xx/irq-gpio.c → arch/arm/mach-s5pc100/irq-gpio.c
Просмотреть файл

@ -1,9 +1,9 @@
/*
* arch/arm/plat-s5pc1xx/irq-gpio.c
* arch/arm/mach-s5pc100/irq-gpio.c
*
* Copyright (C) 2009 Samsung Electronics
*
* S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
* S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -19,7 +19,7 @@
#include <mach/map.h>
#include <plat/gpio-cfg.h>
#define S5PC1XX_GPIOREG(x) (S5PC1XX_VA_GPIO + (x))
#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x))
#define CON_OFFSET 0x700
#define MASK_OFFSET 0x900
@ -49,7 +49,7 @@ static int group_to_pend_offset(int group)
return group << 2;
}
static int s5pc1xx_get_start(unsigned int group)
static int s5pc100_get_start(unsigned int group)
{
switch (group) {
case 0: return S5PC100_GPIO_A0_START;
@ -80,7 +80,7 @@ static int s5pc1xx_get_start(unsigned int group)
return -EINVAL;
}
static int s5pc1xx_get_group(unsigned int irq)
static int s5pc100_get_group(unsigned int irq)
{
irq -= S3C_IRQ_GPIO(0);
@ -134,67 +134,67 @@ static int s5pc1xx_get_group(unsigned int irq)
return -EINVAL;
}
static int s5pc1xx_get_offset(unsigned int irq)
static int s5pc100_get_offset(unsigned int irq)
{
struct gpio_chip *chip = get_irq_data(irq);
return irq - S3C_IRQ_GPIO(chip->base);
}
static void s5pc1xx_gpioint_ack(unsigned int irq)
static void s5pc100_gpioint_ack(unsigned int irq)
{
int group, offset, pend_offset;
unsigned int value;
group = s5pc1xx_get_group(irq);
offset = s5pc1xx_get_offset(irq);
group = s5pc100_get_group(irq);
offset = s5pc100_get_offset(irq);
pend_offset = group_to_pend_offset(group);
value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
value |= 1 << offset;
__raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
__raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
}
static void s5pc1xx_gpioint_mask(unsigned int irq)
static void s5pc100_gpioint_mask(unsigned int irq)
{
int group, offset, mask_offset;
unsigned int value;
group = s5pc1xx_get_group(irq);
offset = s5pc1xx_get_offset(irq);
group = s5pc100_get_group(irq);
offset = s5pc100_get_offset(irq);
mask_offset = group_to_mask_offset(group);
value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
value |= 1 << offset;
__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
}
static void s5pc1xx_gpioint_unmask(unsigned int irq)
static void s5pc100_gpioint_unmask(unsigned int irq)
{
int group, offset, mask_offset;
unsigned int value;
group = s5pc1xx_get_group(irq);
offset = s5pc1xx_get_offset(irq);
group = s5pc100_get_group(irq);
offset = s5pc100_get_offset(irq);
mask_offset = group_to_mask_offset(group);
value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
value &= ~(1 << offset);
__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
}
static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
static void s5pc100_gpioint_mask_ack(unsigned int irq)
{
s5pc1xx_gpioint_mask(irq);
s5pc1xx_gpioint_ack(irq);
s5pc100_gpioint_mask(irq);
s5pc100_gpioint_ack(irq);
}
static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
{
int group, offset, con_offset;
unsigned int value;
group = s5pc1xx_get_group(irq);
offset = s5pc1xx_get_offset(irq);
group = s5pc100_get_group(irq);
offset = s5pc100_get_offset(irq);
con_offset = group_to_con_offset(group);
switch (type) {
@ -221,24 +221,24 @@ static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
}
value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
value &= ~(0xf << (offset * 0x4));
value |= (type << (offset * 0x4));
__raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
__raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
return 0;
}
struct irq_chip s5pc1xx_gpioint = {
struct irq_chip s5pc100_gpioint = {
.name = "GPIO",
.ack = s5pc1xx_gpioint_ack,
.mask = s5pc1xx_gpioint_mask,
.mask_ack = s5pc1xx_gpioint_mask_ack,
.unmask = s5pc1xx_gpioint_unmask,
.set_type = s5pc1xx_gpioint_set_type,
.ack = s5pc100_gpioint_ack,
.mask = s5pc100_gpioint_mask,
.mask_ack = s5pc100_gpioint_mask_ack,
.unmask = s5pc100_gpioint_unmask,
.set_type = s5pc100_gpioint_set_type,
};
void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
{
int group, offset, pend_offset, mask_offset;
int real_irq, group_end;
@ -248,17 +248,17 @@ void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
for (group = 0; group < group_end; group++) {
pend_offset = group_to_pend_offset(group);
pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
if (!pend)
continue;
mask_offset = group_to_mask_offset(group);
mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
pend &= ~mask;
for (offset = 0; offset < 8; offset++) {
if (pend & (1 << offset)) {
real_irq = s5pc1xx_get_start(group) + offset;
real_irq = s5pc100_get_start(group) + offset;
generic_handle_irq(S3C_IRQ_GPIO(real_irq));
}
}

54
arch/arm/mach-s5pc100/mach-smdkc100.c
Просмотреть файл

@ -43,38 +43,48 @@
#include <plat/fb.h>
#include <plat/iic.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5PC100_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5PC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S3C2440_UFCON_RXTRIG8 | \
S3C2440_UFCON_TXTRIG16)
static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
},
};
@ -118,8 +128,7 @@ static struct platform_device smdkc100_lcd_powerdev = {
static struct s3c_fb_pd_win smdkc100_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 70,
.pixclock = (8+13+3+800)*(7+5+1+480),
.pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80),
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
@ -140,8 +149,6 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
.setup_gpio = s5pc100_fb_gpio_setup_24bpp,
};
static struct map_desc smdkc100_iodesc[] = {};
static struct platform_device *smdkc100_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
@ -154,7 +161,7 @@ static struct platform_device *smdkc100_devices[] __initdata = {
static void __init smdkc100_map_io(void)
{
s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
}
@ -178,10 +185,9 @@ static void __init smdkc100_machine_init(void)
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
.phys_io = S5PC100_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S5PC100_PA_SDRAM + 0x100,
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,

4
arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c → arch/arm/mach-s5pc100/setup-sdhci-gpio.c
Просмотреть файл

@ -1,8 +1,8 @@
/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
*
* Copyright 2009 Samsung Eletronics
*
* S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
* S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as

2
arch/arm/plat-s5p/Kconfig
Просмотреть файл

@ -7,7 +7,7 @@
config PLAT_S5P
bool
depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
default y
select ARM_VIC
select NO_IOPORT

10
arch/arm/plat-s5p/cpu.c
Просмотреть файл

@ -19,12 +19,14 @@
#include <plat/cpu.h>
#include <plat/s5p6440.h>
#include <plat/s5p6442.h>
#include <plat/s5pc100.h>
#include <plat/s5pv210.h>
/* table of supported CPUs */
static const char name_s5p6440[] = "S5P6440";
static const char name_s5p6442[] = "S5P6442";
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static struct cpu_table cpu_ids[] __initdata = {
@ -44,6 +46,14 @@ static struct cpu_table cpu_ids[] __initdata = {
.init_uarts = s5p6442_init_uarts,
.init = s5p6442_init,
.name = name_s5p6442,
}, {
.idcode = 0x43100000,
.idmask = 0xfffff000,
.map_io = s5pc100_map_io,
.init_clocks = s5pc100_init_clocks,
.init_uarts = s5pc100_init_uarts,
.init = s5pc100_init,
.name = name_s5pc100,
}, {
.idcode = 0x43110000,
.idmask = 0xfffff000,

33
arch/arm/plat-s5p/include/plat/s5pc100.h Normal file
Просмотреть файл

@ -0,0 +1,33 @@
/* arch/arm/plat-s5p/include/plat/s5pc100.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Header file for s5pc100 cpu support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* Common init code for S5PC100 related SoCs */
extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s5pc100_register_clocks(void);
extern void s5pc100_setup_clocks(void);
#ifdef CONFIG_CPU_S5PC100
extern int s5pc100_init(void);
extern void s5pc100_init_irq(void);
extern void s5pc100_map_io(void);
extern void s5pc100_init_clocks(int xtal);
#define s5pc100_init_uarts s5pc100_common_init_uarts
#else
#define s5pc100_init_clocks NULL
#define s5pc100_init_uarts NULL
#define s5pc100_map_io NULL
#define s5pc100_init NULL
#endif

47
arch/arm/plat-s5pc1xx/Kconfig
Просмотреть файл

@ -1,47 +0,0 @@
# Copyright 2009 Samsung Electronics Co.
# Byungho Min <bhmin@samsung.com>
#
# Licensed under GPLv2
config PLAT_S5PC1XX
bool
depends on ARCH_S5PC1XX
default y
select PLAT_S3C
select ARM_VIC
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_UART
select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
select S5P_GPIO_DRVSTR
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
select SAMSUNG_GPIOLIB_4BIT
help
Base platform code for any Samsung S5PC1XX device
if PLAT_S5PC1XX
# Configuration options shared by all S3C64XX implementations
config CPU_S5PC100_INIT
bool
help
Common initialisation code for the S5PC1XX
config CPU_S5PC100_CLOCK
bool
help
Common clock support code for the S5PC1XX
# platform specific device setup
config S5PC1XX_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
endif

26
arch/arm/plat-s5pc1xx/Makefile
Просмотреть файл

@ -1,26 +0,0 @@
# arch/arm/plat-s5pc1xx/Makefile
#
# Copyright 2009 Samsung Electronics Co.
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n := dummy.o
obj- :=
# Core files
obj-y += dev-uart.o
obj-y += cpu.o
obj-y += irq.o
obj-y += clock.o
# CPU support
obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o
obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
# Device setup
obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o

709
arch/arm/plat-s5pc1xx/clock.c
Просмотреть файл

@ -1,709 +0,0 @@
/* linux/arch/arm/plat-s5pc1xx/clock.c
*
* Copyright 2009 Samsung Electronics Co.
*
* S5PC1XX Base clock support
*
* Based on plat-s3c64xx/clock.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <plat/regs-clock.h>
#include <plat/devs.h>
#include <plat/clock.h>
struct clk clk_27m = {
.name = "clk_27m",
.id = -1,
.rate = 27000000,
};
static int clk_48m_ctrl(struct clk *clk, int enable)
{
unsigned long flags;
u32 val;
/* can't rely on clock lock, this register has other usages */
local_irq_save(flags);
val = __raw_readl(S5PC100_CLKSRC1);
if (enable)
val |= S5PC100_CLKSRC1_CLK48M_MASK;
else
val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
__raw_writel(val, S5PC100_CLKSRC1);
local_irq_restore(flags);
return 0;
}
struct clk clk_48m = {
.name = "clk_48m",
.id = -1,
.rate = 48000000,
.enable = clk_48m_ctrl,
};
struct clk clk_54m = {
.name = "clk_54m",
.id = -1,
.rate = 54000000,
};
struct clk clk_hd0 = {
.name = "hclkd0",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
.ops = &clk_ops_def_setrate,
};
struct clk clk_pd0 = {
.name = "pclkd0",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
.ops = &clk_ops_def_setrate,
};
static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
{
unsigned int ctrlbit = clk->ctrlbit;
u32 con;
con = __raw_readl(reg);
if (enable)
con |= ctrlbit;
else
con &= ~ctrlbit;
__raw_writel(con, reg);
return 0;
}
static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
}
static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
}
static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
}
static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
}
static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
}
static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
}
static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
}
static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
}
static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
}
static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
}
int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
}
int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
{
return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
}
static struct clk s5pc100_init_clocks_disable[] = {
{
.name = "dsi",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_DSI,
}, {
.name = "csi",
.id = -1,
.parent = &clk_h,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_CSI,
}, {
.name = "ccan",
.id = 0,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
}, {
.name = "ccan",
.id = 1,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
}, {
.name = "keypad",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
}, {
.name = "hclkd2",
.id = -1,
.parent = NULL,
.enable = s5pc100_clk_d20_ctrl,
.ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
}, {
.name = "iis-d2",
.id = -1,
.parent = NULL,
.enable = s5pc100_clk_d20_ctrl,
.ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
},
};
static struct clk s5pc100_init_clocks[] = {
/* System1 (D0_0) devices */
{
.name = "intc",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d00_ctrl,
.ctrlbit = S5PC100_CLKGATE_D00_INTC,
}, {
.name = "tzic",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d00_ctrl,
.ctrlbit = S5PC100_CLKGATE_D00_TZIC,
}, {
.name = "cf-ata",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d00_ctrl,
.ctrlbit = S5PC100_CLKGATE_D00_CFCON,
}, {
.name = "mdma",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d00_ctrl,
.ctrlbit = S5PC100_CLKGATE_D00_MDMA,
}, {
.name = "g2d",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d00_ctrl,
.ctrlbit = S5PC100_CLKGATE_D00_G2D,
}, {
.name = "secss",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d00_ctrl,
.ctrlbit = S5PC100_CLKGATE_D00_SECSS,
}, {
.name = "cssys",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d00_ctrl,
.ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
},
/* Memory (D0_1) devices */
{
.name = "dmc",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d01_ctrl,
.ctrlbit = S5PC100_CLKGATE_D01_DMC,
}, {
.name = "sromc",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d01_ctrl,
.ctrlbit = S5PC100_CLKGATE_D01_SROMC,
}, {
.name = "onenand",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d01_ctrl,
.ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
}, {
.name = "nand",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d01_ctrl,
.ctrlbit = S5PC100_CLKGATE_D01_NFCON,
}, {
.name = "intmem",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d01_ctrl,
.ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
}, {
.name = "ebi",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d01_ctrl,
.ctrlbit = S5PC100_CLKGATE_D01_EBI,
},
/* System2 (D0_2) devices */
{
.name = "seckey",
.id = -1,
.parent = &clk_pd0,
.enable = s5pc100_clk_d02_ctrl,
.ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
}, {
.name = "sdm",
.id = -1,
.parent = &clk_hd0,
.enable = s5pc100_clk_d02_ctrl,
.ctrlbit = S5PC100_CLKGATE_D02_SDM,
},
/* File (D1_0) devices */
{
.name = "pdma",
.id = 0,
.parent = &clk_h,
.enable = s5pc100_clk_d10_ctrl,
.ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
}, {
.name = "pdma",
.id = 1,
.parent = &clk_h,
.enable = s5pc100_clk_d10_ctrl,
.ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
}, {
.name = "usb-host",
.id = -1,
.parent = &clk_h,
.enable = s5pc100_clk_d10_ctrl,
.ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
}, {
.name = "otg",
.id = -1,
.parent = &clk_h,
.enable = s5pc100_clk_d10_ctrl,
.ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
}, {
.name = "modem",
.id = -1,
.parent = &clk_h,
.enable = s5pc100_clk_d10_ctrl,
.ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
}, {
.name = "hsmmc",
.id = 0,
.parent = &clk_48m,
.enable = s5pc100_clk_d10_ctrl,
.ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
}, {
.name = "hsmmc",
.id = 1,
.parent = &clk_48m,
.enable = s5pc100_clk_d10_ctrl,
.ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
}, {
.name = "hsmmc",
.id = 2,
.parent = &clk_48m,
.enable = s5pc100_clk_d10_ctrl,
.ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
},
/* Multimedia1 (D1_1) devices */
{
.name = "lcd",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_LCD,
}, {
.name = "rotator",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
}, {
.name = "fimc",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
}, {
.name = "fimc",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
}, {
.name = "fimc",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
}, {
.name = "jpeg",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_JPEG,
}, {
.name = "g3d",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d11_ctrl,
.ctrlbit = S5PC100_CLKGATE_D11_G3D,
},
/* Multimedia2 (D1_2) devices */
{
.name = "tv",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d12_ctrl,
.ctrlbit = S5PC100_CLKGATE_D12_TV,
}, {
.name = "vp",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d12_ctrl,
.ctrlbit = S5PC100_CLKGATE_D12_VP,
}, {
.name = "mixer",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d12_ctrl,
.ctrlbit = S5PC100_CLKGATE_D12_MIXER,
}, {
.name = "hdmi",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d12_ctrl,
.ctrlbit = S5PC100_CLKGATE_D12_HDMI,
}, {
.name = "mfc",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d12_ctrl,
.ctrlbit = S5PC100_CLKGATE_D12_MFC,
},
/* System (D1_3) devices */
{
.name = "chipid",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d13_ctrl,
.ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
}, {
.name = "gpio",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d13_ctrl,
.ctrlbit = S5PC100_CLKGATE_D13_GPIO,
}, {
.name = "apc",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d13_ctrl,
.ctrlbit = S5PC100_CLKGATE_D13_APC,
}, {
.name = "iec",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d13_ctrl,
.ctrlbit = S5PC100_CLKGATE_D13_IEC,
}, {
.name = "timers",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d13_ctrl,
.ctrlbit = S5PC100_CLKGATE_D13_PWM,
}, {
.name = "systimer",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d13_ctrl,
.ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
}, {
.name = "watchdog",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d13_ctrl,
.ctrlbit = S5PC100_CLKGATE_D13_WDT,
}, {
.name = "rtc",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d13_ctrl,
.ctrlbit = S5PC100_CLKGATE_D13_RTC,
},
/* Connectivity (D1_4) devices */
{
.name = "uart",
.id = 0,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_UART0,
}, {
.name = "uart",
.id = 1,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_UART1,
}, {
.name = "uart",
.id = 2,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_UART2,
}, {
.name = "uart",
.id = 3,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_UART3,
}, {
.name = "i2c",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_IIC,
}, {
.name = "hdmi-i2c",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
}, {
.name = "spi",
.id = 0,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_SPI0,
}, {
.name = "spi",
.id = 1,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_SPI1,
}, {
.name = "spi",
.id = 2,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_SPI2,
}, {
.name = "irda",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_IRDA,
}, {
.name = "hsitx",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_HSITX,
}, {
.name = "hsirx",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d14_ctrl,
.ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
},
/* Audio (D1_5) devices */
{
.name = "iis",
.id = 0,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_IIS0,
}, {
.name = "iis",
.id = 1,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_IIS1,
}, {
.name = "iis",
.id = 2,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_IIS2,
}, {
.name = "ac97",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_AC97,
}, {
.name = "pcm",
.id = 0,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_PCM0,
}, {
.name = "pcm",
.id = 1,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_PCM1,
}, {
.name = "spdif",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
}, {
.name = "adc",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_TSADC,
}, {
.name = "cg",
.id = -1,
.parent = &clk_p,
.enable = s5pc100_clk_d15_ctrl,
.ctrlbit = S5PC100_CLKGATE_D15_CG,
},
/* Audio (D2_0) devices: all disabled */
/* Special Clocks 0 */
{
.name = "sclk_hpm",
.id = -1,
.parent = NULL,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = S5PC100_CLKGATE_SCLK0_HPM,
}, {
.name = "sclk_onenand",
.id = -1,
.parent = NULL,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
}, {
.name = "spi_48",
.id = 0,
.parent = &clk_48m,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
}, {
.name = "spi_48",
.id = 1,
.parent = &clk_48m,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
}, {
.name = "spi_48",
.id = 2,
.parent = &clk_48m,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
}, {
.name = "mmc_48",
.id = 0,
.parent = &clk_48m,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
}, {
.name = "mmc_48",
.id = 1,
.parent = &clk_48m,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
}, {
.name = "mmc_48",
.id = 2,
.parent = &clk_48m,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
},
/* Special Clocks 1 */
};
static struct clk *clks[] __initdata = {
&clk_ext,
&clk_epll,
&clk_pd0,
&clk_hd0,
&clk_27m,
&clk_48m,
&clk_54m,
};
void __init s5pc1xx_register_clocks(void)
{
struct clk *clkp;
int ret;
int ptr;
int size;
s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
s3c_register_clocks(s5pc100_init_clocks,
ARRAY_SIZE(s5pc100_init_clocks));
clkp = s5pc100_init_clocks_disable;
size = ARRAY_SIZE(s5pc100_init_clocks_disable);
for (ptr = 0; ptr < size; ptr++, clkp++) {
ret = s3c24xx_register_clock(clkp);
if (ret < 0) {
printk(KERN_ERR "Failed to register clock %s (%d)\n",
clkp->name, ret);
}
(clkp->enable)(clkp, 0);
}
s3c_pwmclk_init();
}

122
arch/arm/plat-s5pc1xx/cpu.c
Просмотреть файл

@ -1,122 +0,0 @@
/* linux/arch/arm/plat-s5pc1xx/cpu.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX CPU Support
*
* Based on plat-s3c64xx/cpu.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <asm/mach/map.h>
#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5pc100.h>
/* table of supported CPUs */
static const char name_s5pc100[] = "S5PC100";
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x43100000,
.idmask = 0xfffff000,
.map_io = s5pc100_map_io,
.init_clocks = s5pc100_init_clocks,
.init_uarts = s5pc100_init_uarts,
.init = s5pc100_init,
.name = name_s5pc100,
},
};
/* minimal IO mapping */
/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
#define UART_OFFS (S3C_PA_UART & 0xffff)
static struct map_desc s5pc1xx_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER,
.pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC1XX_VA_GPIO,
.pfn = __phys_to_pfn(S5PC100_PA_GPIO),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC1XX_VA_CHIPID,
.pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
.length = SZ_16,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC1XX_VA_CLK,
.pfn = __phys_to_pfn(S5PC1XX_PA_CLK),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC1XX_VA_PWR,
.pfn = __phys_to_pfn(S5PC1XX_PA_PWR),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)(S5PC1XX_VA_UART),
.pfn = __phys_to_pfn(S5PC1XX_PA_UART),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC1XX_VA_VIC(0),
.pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC1XX_VA_VIC(1),
.pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC1XX_VA_VIC(2),
.pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC1XX_VA_TIMER,
.pfn = __phys_to_pfn(S5PC1XX_PA_TIMER),
.length = SZ_256,
.type = MT_DEVICE,
},
};
/* read cpu identification code */
void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
{
unsigned long idcode;
/* initialise the io descriptors we need for initialisation */
iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
iotable_init(mach_desc, size);
idcode = __raw_readl(S5PC1XX_VA_CHIPID);
s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
}

145
arch/arm/plat-s5pc1xx/dev-uart.c
Просмотреть файл

@ -1,145 +0,0 @@
/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* Based on plat-s3c64xx/dev-uart.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <plat/devs.h>
/* Serial port registrations */
/* 64xx uarts are closer together */
static struct resource s5pc1xx_uart0_resource[] = {
[0] = {
.start = S3C_PA_UART0,
.end = S3C_PA_UART0 + 0x100,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX0,
.end = IRQ_S3CUART_RX0,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX0,
.end = IRQ_S3CUART_TX0,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR0,
.end = IRQ_S3CUART_ERR0,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s5pc1xx_uart1_resource[] = {
[0] = {
.start = S3C_PA_UART1,
.end = S3C_PA_UART1 + 0x100,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX1,
.end = IRQ_S3CUART_RX1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX1,
.end = IRQ_S3CUART_TX1,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR1,
.end = IRQ_S3CUART_ERR1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource s5pc1xx_uart2_resource[] = {
[0] = {
.start = S3C_PA_UART2,
.end = S3C_PA_UART2 + 0x100,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX2,
.end = IRQ_S3CUART_RX2,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX2,
.end = IRQ_S3CUART_TX2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR2,
.end = IRQ_S3CUART_ERR2,
.flags = IORESOURCE_IRQ,
},
};
static struct resource s5pc1xx_uart3_resource[] = {
[0] = {
.start = S3C_PA_UART3,
.end = S3C_PA_UART3 + 0x100,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX3,
.end = IRQ_S3CUART_RX3,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX3,
.end = IRQ_S3CUART_TX3,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR3,
.end = IRQ_S3CUART_ERR3,
.flags = IORESOURCE_IRQ,
},
};
struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
[0] = {
.resources = s5pc1xx_uart0_resource,
.nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
},
[1] = {
.resources = s5pc1xx_uart1_resource,
.nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
},
[2] = {
.resources = s5pc1xx_uart2_resource,
.nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
},
[3] = {
.resources = s5pc1xx_uart3_resource,
.nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
},
};

44
arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
Просмотреть файл

@ -1,44 +0,0 @@
/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
*
* Copyright 2009 Samsung Electronics Co.
*
* External Interrupt (GPH0 ~ GPH3) control register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0)
#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4)
#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8)
#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC)
#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80)
#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84)
#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88)
#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C)
#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90)
#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94)
#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98)
#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C)
#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100)
#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104)
#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108)
#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C)
#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140)
#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144)
#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148)
#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C)
#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
#define S5PC1XX_WKUP_INT_LOWLEV (0x00)
#define S5PC1XX_WKUP_INT_HILEV (0x01)
#define S5PC1XX_WKUP_INT_FALLEDGE (0x02)
#define S5PC1XX_WKUP_INT_RISEEDGE (0x03)
#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04)

198
arch/arm/plat-s5pc1xx/include/plat/irqs.h
Просмотреть файл

@ -1,198 +0,0 @@
/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX - Common IRQ support
*
* Based on plat-s3c64xx/include/plat/irqs.h
*/
#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
/* we keep the first set of CPU IRQs out of the range of
* the ISA space, so that the PC104 has them to itself
* and we don't end up having to do horrible things to the
* standard ISA drivers....
*
* note, since we're using the VICs, our start must be a
* mulitple of 32 to allow the common code to work
*/
#define S3C_IRQ_OFFSET (32)
#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
#define S3C_VIC0_BASE S3C_IRQ(0)
#define S3C_VIC1_BASE S3C_IRQ(32)
#define S3C_VIC2_BASE S3C_IRQ(64)
/* UART interrupts, each UART has 4 intterupts per channel so
* use the space between the ISA and S3C main interrupts. Note, these
* are not in the same order as the S3C24XX series! */
#define IRQ_S3CUART_BASE0 (16)
#define IRQ_S3CUART_BASE1 (20)
#define IRQ_S3CUART_BASE2 (24)
#define IRQ_S3CUART_BASE3 (28)
#define UART_IRQ_RXD (0)
#define UART_IRQ_ERR (1)
#define UART_IRQ_TXD (2)
#define UART_IRQ_MODEM (3)
#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
/* VIC based IRQs */
#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x))
/*
* VIC0: system, DMA, timer
*/
#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0)
#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1)
#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2)
#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3)
#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4)
#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5)
#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6)
#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7)
#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8)
#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9)
#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10)
#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11)
#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12)
#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13)
#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14)
#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15)
#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16)
#define IRQ_BATF S5PC1XX_IRQ_VIC0(17)
#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21)
#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22)
#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23)
#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24)
#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25)
#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29)
#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30)
/*
* VIC1: ARM, power, memory, connectivity
*/
#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0)
#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1)
#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2)
#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3)
#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4)
#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5)
#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6)
#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7)
#define IRQ_NFC S5PC1XX_IRQ_VIC1(8)
#define IRQ_CFC S5PC1XX_IRQ_VIC1(9)
#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10)
#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11)
#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12)
#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13)
#define IRQ_IIC S5PC1XX_IRQ_VIC1(14)
#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15)
#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16)
#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17)
#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18)
#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19)
#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20)
#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21)
#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22)
#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23)
#define IRQ_OTG S5PC1XX_IRQ_VIC1(24)
#define IRQ_MSM S5PC1XX_IRQ_VIC1(25)
#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26)
#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27)
#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28)
#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29)
#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30)
/*
* VIC2: multimedia, audio, security
*/
#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0)
#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1)
#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2)
#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3)
#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4)
#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5)
#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6)
#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7)
#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8)
#define IRQ_2D S5PC1XX_IRQ_VIC2(9)
#define IRQ_3D S5PC1XX_IRQ_VIC2(10)
#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11)
#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12)
#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13)
#define IRQ_MFC S5PC1XX_IRQ_VIC2(14)
#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15)
#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16)
#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17)
#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18)
#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19)
#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20)
#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21)
#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22)
#define IRQ_ADC S5PC1XX_IRQ_VIC2(23)
#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24)
#define IRQ_TC IRQ_PENDN
#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25)
#define IRQ_CG S5PC1XX_IRQ_VIC2(26)
#define IRQ_SEC S5PC1XX_IRQ_VIC2(27)
#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28)
#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29)
#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x))
#define IRQ_TIMER0 IRQ_TIMER(0)
#define IRQ_TIMER1 IRQ_TIMER(1)
#define IRQ_TIMER2 IRQ_TIMER(2)
#define IRQ_TIMER3 IRQ_TIMER(3)
#define IRQ_TIMER4 IRQ_TIMER(4)
/* External interrupt */
#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6)
#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16))
#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
/* GPIO interrupt */
#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
/*
* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
*/
#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */

38
arch/arm/plat-s5pc1xx/include/plat/pll.h
Просмотреть файл

@ -1,38 +0,0 @@
/* arch/arm/plat-s5pc1xx/include/plat/pll.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX PLL code
*
* Based on plat-s3c64xx/include/plat/pll.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
#define S5P_PLL_MDIV_SHIFT (16)
#define S5P_PLL_PDIV_SHIFT (8)
#define S5P_PLL_SDIV_SHIFT (0)
#include <asm/div64.h>
static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
u32 pllcon)
{
u32 mdiv, pdiv, sdiv;
u64 fvco = baseclk;
mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
fvco *= mdiv;
do_div(fvco, (pdiv << sdiv));
return (unsigned long)fvco;
}

252
arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
Просмотреть файл

@ -1,252 +0,0 @@
/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX clock register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __PLAT_REGS_CLOCK_H
#define __PLAT_REGS_CLOCK_H __FILE__
#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x))
#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x))
/* s5pc100 register for clock */
#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00)
#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04)
#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08)
#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C)
#define S5PC100_APLL_CON S5PC100_CLKREG(0x100)
#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104)
#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108)
#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C)
#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200)
#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204)
#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208)
#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C)
#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300)
#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304)
#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308)
#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C)
#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310)
#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400)
#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500)
#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504)
#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508)
#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520)
#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524)
#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528)
#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C)
#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530)
#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534)
#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540)
#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560)
#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564)
/* EPLL_CON */
#define S5PC100_EPLL_EN (1<<31)
#define S5PC100_EPLL_MASK 0xffffffff
#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
/* CLKDIV0 */
#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0)
#define S5PC100_CLKDIV0_APLL_SHIFT (0)
#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
#define S5PC100_CLKDIV0_ARM_SHIFT (4)
#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
#define S5PC100_CLKDIV0_D0_SHIFT (8)
#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12)
#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12)
#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
/* CLKDIV1 (OneNAND clock only used in one place, removed) */
#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0)
#define S5PC100_CLKDIV1_APLL2_SHIFT (0)
#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
#define S5PC100_CLKDIV1_MPLL2_SHIFT (8)
#define S5PC100_CLKDIV1_D1_MASK (0x7<<12)
#define S5PC100_CLKDIV1_D1_SHIFT (12)
#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
#define S5PC100_CLKDIV1_CAM_SHIFT (24)
/* CLKDIV2 => removed in clksrc update */
/* CLKDIV3 => removed in clksrc update, or not needed */
/* CLKDIV4 => removed in clksrc update, or not needed */
/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
#define S5PC100_CLKGATE_D00_INTC (1<<0)
#define S5PC100_CLKGATE_D00_TZIC (1<<1)
#define S5PC100_CLKGATE_D00_CFCON (1<<2)
#define S5PC100_CLKGATE_D00_MDMA (1<<3)
#define S5PC100_CLKGATE_D00_G2D (1<<4)
#define S5PC100_CLKGATE_D00_SECSS (1<<5)
#define S5PC100_CLKGATE_D00_CSSYS (1<<6)
/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
#define S5PC100_CLKGATE_D01_DMC (1<<0)
#define S5PC100_CLKGATE_D01_SROMC (1<<1)
#define S5PC100_CLKGATE_D01_ONENAND (1<<2)
#define S5PC100_CLKGATE_D01_NFCON (1<<3)
#define S5PC100_CLKGATE_D01_INTMEM (1<<4)
#define S5PC100_CLKGATE_D01_EBI (1<<5)
/* PCLKD0 Clock Gate 2 Registers */
#define S5PC100_CLKGATE_D02_SECKEY (1<<1)
#define S5PC100_CLKGATE_D02_SDM (1<<2)
/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
#define S5PC100_CLKGATE_D10_PDMA0 (1<<0)
#define S5PC100_CLKGATE_D10_PDMA1 (1<<1)
#define S5PC100_CLKGATE_D10_USBHOST (1<<2)
#define S5PC100_CLKGATE_D10_USBOTG (1<<3)
#define S5PC100_CLKGATE_D10_MODEMIF (1<<4)
#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5)
#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6)
#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7)
/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
#define S5PC100_CLKGATE_D11_LCD (1<<0)
#define S5PC100_CLKGATE_D11_ROTATOR (1<<1)
#define S5PC100_CLKGATE_D11_FIMC0 (1<<2)
#define S5PC100_CLKGATE_D11_FIMC1 (1<<3)
#define S5PC100_CLKGATE_D11_FIMC2 (1<<4)
#define S5PC100_CLKGATE_D11_JPEG (1<<5)
#define S5PC100_CLKGATE_D11_DSI (1<<6)
#define S5PC100_CLKGATE_D11_CSI (1<<7)
#define S5PC100_CLKGATE_D11_G3D (1<<8)
/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
#define S5PC100_CLKGATE_D12_TV (1<<0)
#define S5PC100_CLKGATE_D12_VP (1<<1)
#define S5PC100_CLKGATE_D12_MIXER (1<<2)
#define S5PC100_CLKGATE_D12_HDMI (1<<3)
#define S5PC100_CLKGATE_D12_MFC (1<<4)
/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
#define S5PC100_CLKGATE_D13_CHIPID (1<<0)
#define S5PC100_CLKGATE_D13_GPIO (1<<1)
#define S5PC100_CLKGATE_D13_APC (1<<2)
#define S5PC100_CLKGATE_D13_IEC (1<<3)
#define S5PC100_CLKGATE_D13_PWM (1<<6)
#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7)
#define S5PC100_CLKGATE_D13_WDT (1<<8)
#define S5PC100_CLKGATE_D13_RTC (1<<9)
/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
#define S5PC100_CLKGATE_D14_UART0 (1<<0)
#define S5PC100_CLKGATE_D14_UART1 (1<<1)
#define S5PC100_CLKGATE_D14_UART2 (1<<2)
#define S5PC100_CLKGATE_D14_UART3 (1<<3)
#define S5PC100_CLKGATE_D14_IIC (1<<4)
#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5)
#define S5PC100_CLKGATE_D14_SPI0 (1<<6)
#define S5PC100_CLKGATE_D14_SPI1 (1<<7)
#define S5PC100_CLKGATE_D14_SPI2 (1<<8)
#define S5PC100_CLKGATE_D14_IRDA (1<<9)
#define S5PC100_CLKGATE_D14_CCAN0 (1<<10)
#define S5PC100_CLKGATE_D14_CCAN1 (1<<11)
#define S5PC100_CLKGATE_D14_HSITX (1<<12)
#define S5PC100_CLKGATE_D14_HSIRX (1<<13)
/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
#define S5PC100_CLKGATE_D15_IIS0 (1<<0)
#define S5PC100_CLKGATE_D15_IIS1 (1<<1)
#define S5PC100_CLKGATE_D15_IIS2 (1<<2)
#define S5PC100_CLKGATE_D15_AC97 (1<<3)
#define S5PC100_CLKGATE_D15_PCM0 (1<<4)
#define S5PC100_CLKGATE_D15_PCM1 (1<<5)
#define S5PC100_CLKGATE_D15_SPDIF (1<<6)
#define S5PC100_CLKGATE_D15_TSADC (1<<7)
#define S5PC100_CLKGATE_D15_KEYIF (1<<8)
#define S5PC100_CLKGATE_D15_CG (1<<9)
/* HCLKD2 Clock Gate 0 Registers */
#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0)
#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
/* Special Clock Gate 0 Registers */
#define S5PC100_CLKGATE_SCLK0_HPM (1<<0)
#define S5PC100_CLKGATE_SCLK0_PWI (1<<1)
#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5)
#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6)
#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7)
#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8)
#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9)
#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10)
#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11)
#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12)
#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13)
#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14)
#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15)
#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16)
#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17)
/* Special Clock Gate 1 Registers */
#define S5PC100_CLKGATE_SCLK1_LCD (1<<0)
#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1)
#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2)
#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3)
#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4)
#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5)
#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6)
#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7)
#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8)
#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9)
#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10)
#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000)
#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008)
#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100)
#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104)
#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200)
#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300)
#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304)
#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308)
#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400)
#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414)
#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420)
#define S5PC100_SWRESET_RESETVAL 0xc100
#define S5PC100_OTHER_SYS_INT 24
#define S5PC100_OTHER_STA_TYPE 23
#define STA_TYPE_EXPON 0
#define STA_TYPE_SFR 1
#define S5PC100_SLEEP_CFG_OSC_EN 0
/* OTHERS Resgister */
#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
/* MIPI D-PHY Control Register 0 */
#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1)
#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0)
#endif /* _PLAT_REGS_CLOCK_H */

84
arch/arm/plat-s5pc1xx/include/plat/regs-power.h
Просмотреть файл

@ -1,84 +0,0 @@
/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
*
* Copyright 2009 Samsung Electronics Co.
* Jongse Won <jongse.won@samsung.com>
*
* S5PC1XX clock register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_REGS_PWR
#define __ASM_ARM_REGS_PWR __FILE__
#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x))
/* s5pc100 (0xE0108000) register for power management */
#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0)
#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4)
#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10)
#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14)
#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18)
#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C)
#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100)
#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104)
#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108)
#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110)
#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114)
#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200)
#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300)
#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304)
#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308)
#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400)
#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404)
#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408)
#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C)
#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410)
#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414)
#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418)
#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C)
#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500)
#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504)
#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508)
#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C)
#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510)
#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514)
#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518)
#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C)
#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520)
#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600)
#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604)
#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608)
#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C)
#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610)
#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614)
#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618)
#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C)
#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620)
#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700)
#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704)
#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708)
#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C)
#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710)
#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714)
#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718)
#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C)
#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724)
/* PWR_CFG */
#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31)
#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5)
#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5)
#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5)
#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5)
#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5)
/* SLEEP_CFG */
#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0)
/* OTHERS */
#define S5PC100_PMU_INT_DISABLE (1 << 24)
#endif /* __ASM_ARM_REGS_PWR */

64
arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
Просмотреть файл

@ -1,64 +0,0 @@
/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* Header file for s5pc100 cpu support
*
* Based on plat-s3c64xx/include/plat/s3c6400.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* Common init code for S5PC100 related SoCs */
extern int s5pc100_init(void);
extern void s5pc100_map_io(void);
extern void s5pc100_init_clocks(int xtal);
extern int s5pc100_register_baseclocks(unsigned long xtal);
extern void s5pc100_init_irq(void);
extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s5pc100_register_clocks(void);
extern void s5pc100_setup_clocks(void);
extern struct sysdev_class s5pc100_sysclass;
#define s5pc100_init_uarts s5pc100_common_init_uarts
/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
extern struct clk clk_hpll;
extern struct clk clk_hd0;
extern struct clk clk_pd0;
extern struct clk clk_54m;
extern void s5pc1xx_register_clocks(void);
extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
extern struct platform_device s3c_device_g2d;
extern struct platform_device s3c_device_g3d;
extern struct platform_device s3c_device_vpp;
extern struct platform_device s3c_device_tvenc;
extern struct platform_device s3c_device_tvscaler;
extern struct platform_device s3c_device_rotator;
extern struct platform_device s3c_device_jpeg;
extern struct platform_device s3c_device_onenand;
extern struct platform_device s3c_device_usb_otghcd;
extern struct platform_device s3c_device_keypad;
extern struct platform_device s3c_device_ts;
extern struct platform_device s3c_device_g3d;
extern struct platform_device s3c_device_smc911x;
extern struct platform_device s3c_device_fimc0;
extern struct platform_device s3c_device_fimc1;
extern struct platform_device s3c_device_mfc;
extern struct platform_device s3c_device_ac97;
extern struct platform_device s3c_device_fimc0;
extern struct platform_device s3c_device_fimc1;
extern struct platform_device s3c_device_fimc2;

281
arch/arm/plat-s5pc1xx/irq-eint.c
Просмотреть файл

@ -1,281 +0,0 @@
/*
* linux/arch/arm/plat-s5pc1xx/irq-eint.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
* Kyungin Park <kyungmin.park@samsung.com>
*
* Based on plat-s3c64xx/irq-eint.c
*
* S5PC1XX - Interrupt handling for IRQ_EINT(x)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/pm.h>
#include <linux/gpio.h>
#include <asm/hardware/vic.h>
#include <mach/map.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-ext.h>
#include <plat/pm.h>
#include <plat/regs-gpio.h>
#include <plat/regs-irqtype.h>
/*
* bank is a group of external interrupt
* bank0 means EINT0 ... EINT7
* bank1 means EINT8 ... EINT15
* bank2 means EINT16 ... EINT23
* bank3 means EINT24 ... EINT31
*/
static inline int s3c_get_eint(unsigned int irq)
{
int real;
if (irq < IRQ_EINT16_31)
real = (irq - IRQ_EINT0);
else
real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
return real;
}
static inline int s3c_get_bank(unsigned int irq)
{
return s3c_get_eint(irq) >> 3;
}
static inline int s3c_eint_to_bit(unsigned int irq)
{
int real, bit;
real = s3c_get_eint(irq);
bit = 1 << (real & (8 - 1));
return bit;
}
static inline void s3c_irq_eint_mask(unsigned int irq)
{
u32 mask;
u32 bank = s3c_get_bank(irq);
mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
mask |= s3c_eint_to_bit(irq);
__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
}
static void s3c_irq_eint_unmask(unsigned int irq)
{
u32 mask;
u32 bank = s3c_get_bank(irq);
mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
mask &= ~(s3c_eint_to_bit(irq));
__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
}
static inline void s3c_irq_eint_ack(unsigned int irq)
{
u32 bank = s3c_get_bank(irq);
__raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
}
static void s3c_irq_eint_maskack(unsigned int irq)
{
/* compiler should in-line these */
s3c_irq_eint_mask(irq);
s3c_irq_eint_ack(irq);
}
static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
{
u32 bank = s3c_get_bank(irq);
int real = s3c_get_eint(irq);
int gpio, shift, sfn;
u32 ctrl, con = 0;
switch (type) {
case IRQ_TYPE_NONE:
printk(KERN_WARNING "No edge setting!\n");
break;
case IRQ_TYPE_EDGE_RISING:
con = S5PC1XX_WKUP_INT_RISEEDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
con = S5PC1XX_WKUP_INT_FALLEDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
con = S5PC1XX_WKUP_INT_BOTHEDGE;
break;
case IRQ_TYPE_LEVEL_LOW:
con = S5PC1XX_WKUP_INT_LOWLEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
con = S5PC1XX_WKUP_INT_HILEV;
break;
default:
printk(KERN_ERR "No such irq type %d", type);
return -EINVAL;
}
gpio = real & (8 - 1);
shift = gpio << 2;
ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
ctrl &= ~(0x7 << shift);
ctrl |= con << shift;
__raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
switch (real) {
case 0 ... 7:
gpio = S5PC100_GPH0(gpio);
break;
case 8 ... 15:
gpio = S5PC100_GPH1(gpio);
break;
case 16 ... 23:
gpio = S5PC100_GPH2(gpio);
break;
case 24 ... 31:
gpio = S5PC100_GPH3(gpio);
break;
default:
return -EINVAL;
}
sfn = S3C_GPIO_SFN(0x2);
s3c_gpio_cfgpin(gpio, sfn);
return 0;
}
static struct irq_chip s3c_irq_eint = {
.name = "EINT",
.mask = s3c_irq_eint_mask,
.unmask = s3c_irq_eint_unmask,
.mask_ack = s3c_irq_eint_maskack,
.ack = s3c_irq_eint_ack,
.set_type = s3c_irq_eint_set_type,
.set_wake = s3c_irqext_wake,
};
/* s3c_irq_demux_eint
*
* This function demuxes the IRQ from external interrupts,
* from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
* the specific handlers s3c_irq_demux_eintX_Y.
*/
static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
{
u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
unsigned int irq;
status &= ~mask;
status &= (1 << (end - start + 1)) - 1;
for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
if (status & 1)
generic_handle_irq(irq);
status >>= 1;
}
}
static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
s3c_irq_demux_eint(16, 23);
s3c_irq_demux_eint(24, 31);
}
/*
* Handle EINT0 ... EINT15 at VIC directly
*/
static void s3c_irq_vic_eint_mask(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
unsigned int real;
s3c_irq_eint_mask(irq);
real = s3c_get_eint(irq);
writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
}
static void s3c_irq_vic_eint_unmask(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
unsigned int real;
s3c_irq_eint_unmask(irq);
real = s3c_get_eint(irq);
writel(1 << real, base + VIC_INT_ENABLE);
}
static inline void s3c_irq_vic_eint_ack(unsigned int irq)
{
u32 bit;
u32 bank = s3c_get_bank(irq);
bit = s3c_eint_to_bit(irq);
__raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
}
static void s3c_irq_vic_eint_maskack(unsigned int irq)
{
/* compiler should in-line these */
s3c_irq_vic_eint_mask(irq);
s3c_irq_vic_eint_ack(irq);
}
static struct irq_chip s3c_irq_vic_eint = {
.name = "EINT",
.mask = s3c_irq_vic_eint_mask,
.unmask = s3c_irq_vic_eint_unmask,
.mask_ack = s3c_irq_vic_eint_maskack,
.ack = s3c_irq_vic_eint_ack,
.set_type = s3c_irq_eint_set_type,
.set_wake = s3c_irqext_wake,
};
static int __init s5pc1xx_init_irq_eint(void)
{
int irq;
for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
set_irq_chip(irq, &s3c_irq_vic_eint);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
set_irq_chip(irq, &s3c_irq_eint);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
return 0;
}
arch_initcall(s5pc1xx_init_irq_eint);

75
arch/arm/plat-s5pc1xx/irq.c
Просмотреть файл

@ -1,75 +0,0 @@
/* arch/arm/plat-s5pc1xx/irq.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX - Interrupt handling
*
* Based on plat-s3c64xx/irq.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <mach/map.h>
#include <plat/irq-vic-timer.h>
#include <plat/irq-uart.h>
#include <plat/cpu.h>
/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
* are consecutive when looking up the interrupt in the demux routines.
*/
static struct s3c_uart_irq uart_irqs[] = {
[0] = {
.regs = (void *)S3C_VA_UART0,
.base_irq = IRQ_S3CUART_BASE0,
.parent_irq = IRQ_UART0,
},
[1] = {
.regs = (void *)S3C_VA_UART1,
.base_irq = IRQ_S3CUART_BASE1,
.parent_irq = IRQ_UART1,
},
[2] = {
.regs = (void *)S3C_VA_UART2,
.base_irq = IRQ_S3CUART_BASE2,
.parent_irq = IRQ_UART2,
},
[3] = {
.regs = (void *)S3C_VA_UART3,
.base_irq = IRQ_S3CUART_BASE3,
.parent_irq = IRQ_UART3,
},
};
void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
{
int i;
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */
for (i = 0; i < num; i++)
vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
vic_valid[i], 0);
/* add the timer sub-irqs */
s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}

876
arch/arm/plat-s5pc1xx/s5pc100-clock.c
Просмотреть файл

@ -1,876 +0,0 @@
/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
*
* Copyright 2009 Samsung Electronics, Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC100 based common clock support
*
* Based on plat-s3c64xx/s3c6400-clock.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/sysdev.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <plat/cpu-freq.h>
#include <plat/regs-clock.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/devs.h>
#include <plat/s5pc100.h>
/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
* ext_xtal_mux for want of an actual name from the manual.
*/
static struct clk clk_ext_xtal_mux = {
.name = "ext_xtal",
.id = -1,
};
#define clk_fin_apll clk_ext_xtal_mux
#define clk_fin_mpll clk_ext_xtal_mux
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fin_hpll clk_ext_xtal_mux
#define clk_fout_mpll clk_mpll
#define clk_vclk_54m clk_54m
/* APLL */
static struct clk clk_fout_apll = {
.name = "fout_apll",
.id = -1,
.rate = 27000000,
};
static struct clk *clk_src_apll_list[] = {
[0] = &clk_fin_apll,
[1] = &clk_fout_apll,
};
static struct clksrc_sources clk_src_apll = {
.sources = clk_src_apll_list,
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
static struct clksrc_clk clk_mout_apll = {
.clk = {
.name = "mout_apll",
.id = -1,
},
.sources = &clk_src_apll,
.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
};
static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_apll = {
.name = "dout_apll",
.id = -1,
.parent = &clk_mout_apll.clk,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_apll_get_rate,
},
};
static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
return rate / (ratio + 1);
}
static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
unsigned long rate)
{
unsigned long parent = clk_get_rate(clk->parent);
u32 div;
if (parent < rate)
return rate;
div = (parent / rate) - 1;
if (div > S5PC100_CLKDIV0_ARM_MASK)
div = S5PC100_CLKDIV0_ARM_MASK;
return parent / (div + 1);
}
static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long parent = clk_get_rate(clk->parent);
u32 div;
u32 val;
if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
return -EINVAL;
rate = clk_round_rate(clk, rate);
div = clk_get_rate(clk->parent) / rate;
val = __raw_readl(S5PC100_CLKDIV0);
val &= S5PC100_CLKDIV0_ARM_MASK;
val |= (div - 1);
__raw_writel(val, S5PC100_CLKDIV0);
return 0;
}
static struct clk clk_arm = {
.name = "armclk",
.id = -1,
.parent = &clk_dout_apll,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_arm_get_rate,
.set_rate = s5pc100_clk_arm_set_rate,
.round_rate = s5pc100_clk_arm_round_rate,
},
};
static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_d0_bus = {
.name = "dout_d0_bus",
.id = -1,
.parent = &clk_arm,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_d0_bus_get_rate,
},
};
static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_pclkd0 = {
.name = "dout_pclkd0",
.id = -1,
.parent = &clk_dout_d0_bus,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_pclkd0_get_rate,
},
};
static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_apll2 = {
.name = "dout_apll2",
.id = -1,
.parent = &clk_mout_apll.clk,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_apll2_get_rate,
},
};
/* MPLL */
static struct clk *clk_src_mpll_list[] = {
[0] = &clk_fin_mpll,
[1] = &clk_fout_mpll,
};
static struct clksrc_sources clk_src_mpll = {
.sources = clk_src_mpll_list,
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
static struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
.id = -1,
},
.sources = &clk_src_mpll,
.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
};
static struct clk *clkset_am_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_dout_apll2,
};
static struct clksrc_sources clk_src_am = {
.sources = clkset_am_list,
.nr_sources = ARRAY_SIZE(clkset_am_list),
};
static struct clksrc_clk clk_mout_am = {
.clk = {
.name = "mout_am",
.id = -1,
},
.sources = &clk_src_am,
.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
};
static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_d1_bus = {
.name = "dout_d1_bus",
.id = -1,
.parent = &clk_mout_am.clk,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_d1_bus_get_rate,
},
};
static struct clk *clkset_onenand_list[] = {
[0] = &clk_dout_d0_bus,
[1] = &clk_dout_d1_bus,
};
static struct clksrc_sources clk_src_onenand = {
.sources = clkset_onenand_list,
.nr_sources = ARRAY_SIZE(clkset_onenand_list),
};
static struct clksrc_clk clk_mout_onenand = {
.clk = {
.name = "mout_onenand",
.id = -1,
},
.sources = &clk_src_onenand,
.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
};
static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_pclkd1 = {
.name = "dout_pclkd1",
.id = -1,
.parent = &clk_dout_d1_bus,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_pclkd1_get_rate,
},
};
static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_mpll2 = {
.name = "dout_mpll2",
.id = -1,
.parent = &clk_mout_am.clk,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_mpll2_get_rate,
},
};
static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_cam = {
.name = "dout_cam",
.id = -1,
.parent = &clk_dout_mpll2,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_cam_get_rate,
},
};
static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned int ratio;
printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
return rate / (ratio + 1);
}
static struct clk clk_dout_mpll = {
.name = "dout_mpll",
.id = -1,
.parent = &clk_mout_am.clk,
.ops = &(struct clk_ops) {
.get_rate = s5pc100_clk_dout_mpll_get_rate,
},
};
/* EPLL */
static struct clk clk_fout_epll = {
.name = "fout_epll",
.id = -1,
};
static struct clk *clk_src_epll_list[] = {
[0] = &clk_fin_epll,
[1] = &clk_fout_epll,
};
static struct clksrc_sources clk_src_epll = {
.sources = clk_src_epll_list,
.nr_sources = ARRAY_SIZE(clk_src_epll_list),
};
static struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
.id = -1,
},
.sources = &clk_src_epll,
.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
};
/* HPLL */
static struct clk clk_fout_hpll = {
.name = "fout_hpll",
.id = -1,
};
static struct clk *clk_src_hpll_list[] = {
[0] = &clk_27m,
[1] = &clk_fout_hpll,
};
static struct clksrc_sources clk_src_hpll = {
.sources = clk_src_hpll_list,
.nr_sources = ARRAY_SIZE(clk_src_hpll_list),
};
static struct clksrc_clk clk_mout_hpll = {
.clk = {
.name = "mout_hpll",
.id = -1,
},
.sources = &clk_src_hpll,
.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
};
/* Peripherals */
/*
* The peripheral clocks are all controlled via clocksource followed
* by an optional divider and gate stage. We currently roll this into
* one clock which hides the intermediate clock from the mux.
*
* Note, the JPEG clock can only be an even divider...
*
* The scaler and LCD clocks depend on the S5PC100 version, and also
* have a common parent divisor so are not included here.
*/
static struct clk clk_iis_cd0 = {
.name = "iis_cdclk0",
.id = -1,
};
static struct clk clk_iis_cd1 = {
.name = "iis_cdclk1",
.id = -1,
};
static struct clk clk_iis_cd2 = {
.name = "iis_cdclk2",
.id = -1,
};
static struct clk clk_pcm_cd0 = {
.name = "pcm_cdclk0",
.id = -1,
};
static struct clk clk_pcm_cd1 = {
.name = "pcm_cdclk1",
.id = -1,
};
static struct clk *clkset_audio0_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_fin_epll,
&clk_iis_cd0,
&clk_pcm_cd0,
&clk_mout_hpll.clk,
};
static struct clksrc_sources clkset_audio0 = {
.sources = clkset_audio0_list,
.nr_sources = ARRAY_SIZE(clkset_audio0_list),
};
static struct clk *clkset_spi_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll2,
&clk_fin_epll,
&clk_mout_hpll.clk,
};
static struct clksrc_sources clkset_spi = {
.sources = clkset_spi_list,
.nr_sources = ARRAY_SIZE(clkset_spi_list),
};
static struct clk *clkset_uart_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
};
static struct clksrc_sources clkset_uart = {
.sources = clkset_uart_list,
.nr_sources = ARRAY_SIZE(clkset_uart_list),
};
static struct clk *clkset_audio1_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_fin_epll,
&clk_iis_cd1,
&clk_pcm_cd1,
&clk_mout_hpll.clk,
};
static struct clksrc_sources clkset_audio1 = {
.sources = clkset_audio1_list,
.nr_sources = ARRAY_SIZE(clkset_audio1_list),
};
static struct clk *clkset_audio2_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_fin_epll,
&clk_iis_cd2,
&clk_mout_hpll.clk,
};
static struct clksrc_sources clkset_audio2 = {
.sources = clkset_audio2_list,
.nr_sources = ARRAY_SIZE(clkset_audio2_list),
};
static struct clksrc_clk clksrc_audio[] = {
{
.clk = {
.name = "audio-bus",
.id = 0,
.ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
.enable = s5pc100_sclk1_ctrl,
},
.sources = &clkset_audio0,
.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
}, {
.clk = {
.name = "audio-bus",
.id = 1,
.ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
.enable = s5pc100_sclk1_ctrl,
},
.sources = &clkset_audio1,
.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
}, {
.clk = {
.name = "audio-bus",
.id = 2,
.ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
.enable = s5pc100_sclk1_ctrl,
},
.sources = &clkset_audio2,
.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
},
};
static struct clk *clkset_spdif_list[] = {
&clksrc_audio[0].clk,
&clksrc_audio[1].clk,
&clksrc_audio[2].clk,
};
static struct clksrc_sources clkset_spdif = {
.sources = clkset_spdif_list,
.nr_sources = ARRAY_SIZE(clkset_spdif_list),
};
static struct clk *clkset_lcd_fimc_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_mout_hpll.clk,
&clk_vclk_54m,
};
static struct clksrc_sources clkset_lcd_fimc = {
.sources = clkset_lcd_fimc_list,
.nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list),
};
static struct clk *clkset_mmc_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_fin_epll,
&clk_mout_hpll.clk ,
};
static struct clksrc_sources clkset_mmc = {
.sources = clkset_mmc_list,
.nr_sources = ARRAY_SIZE(clkset_mmc_list),
};
static struct clk *clkset_usbhost_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_mout_hpll.clk,
&clk_48m,
};
static struct clksrc_sources clkset_usbhost = {
.sources = clkset_usbhost_list,
.nr_sources = ARRAY_SIZE(clkset_usbhost_list),
};
static struct clksrc_clk clksrc_clks[] = {
{
.clk = {
.name = "spi_bus",
.id = 0,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
.enable = s5pc100_sclk0_ctrl,
},
.sources = &clkset_spi,
.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
}, {
.clk = {
.name = "spi_bus",
.id = 1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
.enable = s5pc100_sclk0_ctrl,
},
.sources = &clkset_spi,
.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
}, {
.clk = {
.name = "spi_bus",
.id = 2,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
.enable = s5pc100_sclk0_ctrl,
},
.sources = &clkset_spi,
.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
}, {
.clk = {
.name = "uclk1",
.id = -1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
.enable = s5pc100_sclk0_ctrl,
},
.sources = &clkset_uart,
.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
}, {
.clk = {
.name = "spdif",
.id = -1,
},
.sources = &clkset_spdif,
.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
}, {
.clk = {
.name = "lcd",
.id = -1,
.ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
.enable = s5pc100_sclk1_ctrl,
},
.sources = &clkset_lcd_fimc,
.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
}, {
.clk = {
.name = "fimc",
.id = 0,
.ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
.enable = s5pc100_sclk1_ctrl,
},
.sources = &clkset_lcd_fimc,
.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
}, {
.clk = {
.name = "fimc",
.id = 1,
.ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
.enable = s5pc100_sclk1_ctrl,
},
.sources = &clkset_lcd_fimc,
.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
}, {
.clk = {
.name = "fimc",
.id = 2,
.ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
.enable = s5pc100_sclk1_ctrl,
},
.sources = &clkset_lcd_fimc,
.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
}, {
.clk = {
.name = "mmc_bus",
.id = 0,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
.enable = s5pc100_sclk0_ctrl,
},
.sources = &clkset_mmc,
.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
}, {
.clk = {
.name = "mmc_bus",
.id = 1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
.enable = s5pc100_sclk0_ctrl,
},
.sources = &clkset_mmc,
.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
}, {
.clk = {
.name = "mmc_bus",
.id = 2,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
.enable = s5pc100_sclk0_ctrl,
},
.sources = &clkset_mmc,
.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
}, {
.clk = {
.name = "usbhost",
.id = -1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
.enable = s5pc100_sclk0_ctrl,
},
.sources = &clkset_usbhost,
.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
}
};
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
&clk_mout_apll,
&clk_mout_mpll,
&clk_mout_am,
&clk_mout_onenand,
&clk_mout_epll,
&clk_mout_hpll,
};
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
void __init_or_cpufreq s5pc100_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long xtal;
unsigned long armclk;
unsigned long hclkd0;
unsigned long hclk;
unsigned long pclkd0;
unsigned long pclk;
unsigned long apll, mpll, epll, hpll;
unsigned int ptr;
u32 clkdiv0, clkdiv1;
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
xtal_clk = clk_get(NULL, "xtal");
BUG_ON(IS_ERR(xtal_clk));
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
print_mhz(apll), print_mhz(mpll),
print_mhz(epll), print_mhz(hpll));
armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
" PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
" PCLK=%ld.%03ld MHz\n",
print_mhz(armclk), print_mhz(hclkd0),
print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
clk_fout_apll.rate = apll;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
clk_fout_hpll.rate = hpll;
clk_h.rate = hclk;
clk_p.rate = pclk;
clk_f.rate = armclk;
for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
s3c_set_clksrc(init_parents[ptr], true);
for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
s3c_set_clksrc(clksrc_audio + ptr, true);
for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
s3c_set_clksrc(clksrc_clks + ptr, true);
}
static struct clk *clks[] __initdata = {
&clk_ext_xtal_mux,
&clk_dout_apll,
&clk_dout_d0_bus,
&clk_dout_pclkd0,
&clk_dout_apll2,
&clk_mout_apll.clk,
&clk_mout_mpll.clk,
&clk_mout_epll.clk,
&clk_mout_hpll.clk,
&clk_mout_am.clk,
&clk_dout_d1_bus,
&clk_mout_onenand.clk,
&clk_dout_pclkd1,
&clk_dout_mpll2,
&clk_dout_cam,
&clk_dout_mpll,
&clk_fout_epll,
&clk_iis_cd0,
&clk_iis_cd1,
&clk_iis_cd2,
&clk_pcm_cd0,
&clk_pcm_cd1,
&clk_arm,
};
void __init s5pc100_register_clocks(void)
{
struct clk *clkp;
int ret;
int ptr;
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
clkp = clks[ptr];
ret = s3c24xx_register_clock(clkp);
if (ret < 0) {
printk(KERN_ERR "Failed to register clock %s (%d)\n",
clkp->name, ret);
}
}
s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
}

2
arch/arm/plat-samsung/Kconfig
Просмотреть файл

@ -6,7 +6,7 @@
config PLAT_SAMSUNG
bool
depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
select NO_IOPORT
default y
help