hwmon: (gl518sm) Avoid forward declaration
Reorder functions to avoid forward declaration. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Axel Lin
Guenter Roeck
Родитель
6579d589ea
Коммит
d4a972a339
|
|
@ -137,33 +137,98 @@ struct gl518_data {
|
|||
u8 beep_enable; /* Boolean */
|
||||
};
|
||||
|
||||
static int gl518_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id);
|
||||
static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info);
|
||||
static void gl518_init_client(struct i2c_client *client);
|
||||
static int gl518_remove(struct i2c_client *client);
|
||||
static int gl518_read_value(struct i2c_client *client, u8 reg);
|
||||
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
|
||||
static struct gl518_data *gl518_update_device(struct device *dev);
|
||||
/*
|
||||
* Registers 0x07 to 0x0c are word-sized, others are byte-sized
|
||||
* GL518 uses a high-byte first convention, which is exactly opposite to
|
||||
* the SMBus standard.
|
||||
*/
|
||||
static int gl518_read_value(struct i2c_client *client, u8 reg)
|
||||
{
|
||||
if ((reg >= 0x07) && (reg <= 0x0c))
|
||||
return i2c_smbus_read_word_swapped(client, reg);
|
||||
else
|
||||
return i2c_smbus_read_byte_data(client, reg);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id gl518_id[] = {
|
||||
{ "gl518sm", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, gl518_id);
|
||||
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
|
||||
{
|
||||
if ((reg >= 0x07) && (reg <= 0x0c))
|
||||
return i2c_smbus_write_word_swapped(client, reg, value);
|
||||
else
|
||||
return i2c_smbus_write_byte_data(client, reg, value);
|
||||
}
|
||||
|
||||
/* This is the driver that will be inserted */
|
||||
static struct i2c_driver gl518_driver = {
|
||||
.class = I2C_CLASS_HWMON,
|
||||
.driver = {
|
||||
.name = "gl518sm",
|
||||
},
|
||||
.probe = gl518_probe,
|
||||
.remove = gl518_remove,
|
||||
.id_table = gl518_id,
|
||||
.detect = gl518_detect,
|
||||
.address_list = normal_i2c,
|
||||
};
|
||||
static struct gl518_data *gl518_update_device(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct gl518_data *data = i2c_get_clientdata(client);
|
||||
int val;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
||||
|| !data->valid) {
|
||||
dev_dbg(&client->dev, "Starting gl518 update\n");
|
||||
|
||||
data->alarms = gl518_read_value(client, GL518_REG_INT);
|
||||
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
|
||||
data->voltage_min[0] = val & 0xff;
|
||||
data->voltage_max[0] = (val >> 8) & 0xff;
|
||||
val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
|
||||
data->voltage_min[1] = val & 0xff;
|
||||
data->voltage_max[1] = (val >> 8) & 0xff;
|
||||
val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
|
||||
data->voltage_min[2] = val & 0xff;
|
||||
data->voltage_max[2] = (val >> 8) & 0xff;
|
||||
val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
|
||||
data->voltage_min[3] = val & 0xff;
|
||||
data->voltage_max[3] = (val >> 8) & 0xff;
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_FAN_COUNT);
|
||||
data->fan_in[0] = (val >> 8) & 0xff;
|
||||
data->fan_in[1] = val & 0xff;
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
|
||||
data->fan_min[0] = (val >> 8) & 0xff;
|
||||
data->fan_min[1] = val & 0xff;
|
||||
|
||||
data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
|
||||
data->temp_max =
|
||||
gl518_read_value(client, GL518_REG_TEMP_MAX);
|
||||
data->temp_hyst =
|
||||
gl518_read_value(client, GL518_REG_TEMP_HYST);
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_MISC);
|
||||
data->fan_div[0] = (val >> 6) & 0x03;
|
||||
data->fan_div[1] = (val >> 4) & 0x03;
|
||||
data->fan_auto1 = (val >> 3) & 0x01;
|
||||
|
||||
data->alarms &= data->alarm_mask;
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_CONF);
|
||||
data->beep_enable = (val >> 2) & 1;
|
||||
|
||||
if (data->type != gl518sm_r00) {
|
||||
data->voltage_in[0] =
|
||||
gl518_read_value(client, GL518_REG_VDD);
|
||||
data->voltage_in[1] =
|
||||
gl518_read_value(client, GL518_REG_VIN1);
|
||||
data->voltage_in[2] =
|
||||
gl518_read_value(client, GL518_REG_VIN2);
|
||||
}
|
||||
data->voltage_in[3] =
|
||||
gl518_read_value(client, GL518_REG_VIN3);
|
||||
|
||||
data->last_updated = jiffies;
|
||||
data->valid = 1;
|
||||
}
|
||||
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
/*
|
||||
* Sysfs stuff
|
||||
|
|
@ -539,6 +604,26 @@ static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Called when we have found a new GL518SM.
|
||||
* Note that we preserve D4:NoFan2 and D2:beep_enable.
|
||||
*/
|
||||
static void gl518_init_client(struct i2c_client *client)
|
||||
{
|
||||
/* Make sure we leave D7:Reset untouched */
|
||||
u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
|
||||
|
||||
/* Comparator mode (D3=0), standby mode (D6=0) */
|
||||
gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
|
||||
|
||||
/* Never interrupts */
|
||||
gl518_write_value(client, GL518_REG_MASK, 0x00);
|
||||
|
||||
/* Clear status register (D5=1), start (D6=1) */
|
||||
gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
|
||||
gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
|
||||
}
|
||||
|
||||
static int gl518_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
|
|
@ -584,27 +669,6 @@ exit_remove_files:
|
|||
return err;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Called when we have found a new GL518SM.
|
||||
* Note that we preserve D4:NoFan2 and D2:beep_enable.
|
||||
*/
|
||||
static void gl518_init_client(struct i2c_client *client)
|
||||
{
|
||||
/* Make sure we leave D7:Reset untouched */
|
||||
u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
|
||||
|
||||
/* Comparator mode (D3=0), standby mode (D6=0) */
|
||||
gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
|
||||
|
||||
/* Never interrupts */
|
||||
gl518_write_value(client, GL518_REG_MASK, 0x00);
|
||||
|
||||
/* Clear status register (D5=1), start (D6=1) */
|
||||
gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
|
||||
gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
|
||||
}
|
||||
|
||||
static int gl518_remove(struct i2c_client *client)
|
||||
{
|
||||
struct gl518_data *data = i2c_get_clientdata(client);
|
||||
|
|
@ -617,98 +681,23 @@ static int gl518_remove(struct i2c_client *client)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Registers 0x07 to 0x0c are word-sized, others are byte-sized
|
||||
* GL518 uses a high-byte first convention, which is exactly opposite to
|
||||
* the SMBus standard.
|
||||
*/
|
||||
static int gl518_read_value(struct i2c_client *client, u8 reg)
|
||||
{
|
||||
if ((reg >= 0x07) && (reg <= 0x0c))
|
||||
return i2c_smbus_read_word_swapped(client, reg);
|
||||
else
|
||||
return i2c_smbus_read_byte_data(client, reg);
|
||||
}
|
||||
static const struct i2c_device_id gl518_id[] = {
|
||||
{ "gl518sm", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, gl518_id);
|
||||
|
||||
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
|
||||
{
|
||||
if ((reg >= 0x07) && (reg <= 0x0c))
|
||||
return i2c_smbus_write_word_swapped(client, reg, value);
|
||||
else
|
||||
return i2c_smbus_write_byte_data(client, reg, value);
|
||||
}
|
||||
|
||||
static struct gl518_data *gl518_update_device(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct gl518_data *data = i2c_get_clientdata(client);
|
||||
int val;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
||||
|| !data->valid) {
|
||||
dev_dbg(&client->dev, "Starting gl518 update\n");
|
||||
|
||||
data->alarms = gl518_read_value(client, GL518_REG_INT);
|
||||
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
|
||||
data->voltage_min[0] = val & 0xff;
|
||||
data->voltage_max[0] = (val >> 8) & 0xff;
|
||||
val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
|
||||
data->voltage_min[1] = val & 0xff;
|
||||
data->voltage_max[1] = (val >> 8) & 0xff;
|
||||
val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
|
||||
data->voltage_min[2] = val & 0xff;
|
||||
data->voltage_max[2] = (val >> 8) & 0xff;
|
||||
val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
|
||||
data->voltage_min[3] = val & 0xff;
|
||||
data->voltage_max[3] = (val >> 8) & 0xff;
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_FAN_COUNT);
|
||||
data->fan_in[0] = (val >> 8) & 0xff;
|
||||
data->fan_in[1] = val & 0xff;
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
|
||||
data->fan_min[0] = (val >> 8) & 0xff;
|
||||
data->fan_min[1] = val & 0xff;
|
||||
|
||||
data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
|
||||
data->temp_max =
|
||||
gl518_read_value(client, GL518_REG_TEMP_MAX);
|
||||
data->temp_hyst =
|
||||
gl518_read_value(client, GL518_REG_TEMP_HYST);
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_MISC);
|
||||
data->fan_div[0] = (val >> 6) & 0x03;
|
||||
data->fan_div[1] = (val >> 4) & 0x03;
|
||||
data->fan_auto1 = (val >> 3) & 0x01;
|
||||
|
||||
data->alarms &= data->alarm_mask;
|
||||
|
||||
val = gl518_read_value(client, GL518_REG_CONF);
|
||||
data->beep_enable = (val >> 2) & 1;
|
||||
|
||||
if (data->type != gl518sm_r00) {
|
||||
data->voltage_in[0] =
|
||||
gl518_read_value(client, GL518_REG_VDD);
|
||||
data->voltage_in[1] =
|
||||
gl518_read_value(client, GL518_REG_VIN1);
|
||||
data->voltage_in[2] =
|
||||
gl518_read_value(client, GL518_REG_VIN2);
|
||||
}
|
||||
data->voltage_in[3] =
|
||||
gl518_read_value(client, GL518_REG_VIN3);
|
||||
|
||||
data->last_updated = jiffies;
|
||||
data->valid = 1;
|
||||
}
|
||||
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
return data;
|
||||
}
|
||||
static struct i2c_driver gl518_driver = {
|
||||
.class = I2C_CLASS_HWMON,
|
||||
.driver = {
|
||||
.name = "gl518sm",
|
||||
},
|
||||
.probe = gl518_probe,
|
||||
.remove = gl518_remove,
|
||||
.id_table = gl518_id,
|
||||
.detect = gl518_detect,
|
||||
.address_list = normal_i2c,
|
||||
};
|
||||
|
||||
module_i2c_driver(gl518_driver);
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче