Input: ALPS - move protocol information to Documentation
In preparation for new protocol support, move the protocol information currently documented in alps.c to Documentation/input/alps.txt, where it can be expanded without cluttering up the driver. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
Seth Forshee
Dmitry Torokhov
Родитель
5a6c865d98
Коммит
d4b347b29b
|
|
@ -0,0 +1,75 @@
|
|||
ALPS Touchpad Protocol
|
||||
----------------------
|
||||
|
||||
Introduction
|
||||
------------
|
||||
|
||||
Currently the ALPS touchpad driver supports two protocol versions in use by
|
||||
ALPS touchpads, the "old" and "new" protocol versions. Fundamentally these
|
||||
differ only in the format of their event packets (in reality many features may
|
||||
be found on new protocol devices that aren't found on the old protocol
|
||||
devices, but these are handled transparently as feature differences rather
|
||||
than protocol differences).
|
||||
|
||||
Detection
|
||||
---------
|
||||
|
||||
All ALPS touchpads should respond to the "E6 report" command sequence:
|
||||
E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
|
||||
00-00-64.
|
||||
|
||||
If the E6 report is successful, the touchpad model is identified using the "E7
|
||||
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
|
||||
matched against known models in the alps_model_data_array.
|
||||
|
||||
Packet Format
|
||||
-------------
|
||||
|
||||
In the following tables, the following notation us used.
|
||||
|
||||
CAPITALS = stick, miniscules = touchpad
|
||||
|
||||
?'s can have different meanings on different models, such as wheel rotation,
|
||||
extra buttons, stick buttons on a dualpoint, etc.
|
||||
|
||||
PS/2 packet format
|
||||
------------------
|
||||
|
||||
byte 0: 0 0 YSGN XSGN 1 M R L
|
||||
byte 1: X7 X6 X5 X4 X3 X2 X1 X0
|
||||
byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
|
||||
|
||||
Note that the device never signals overflow condition.
|
||||
|
||||
ALPS Absolute Mode - Old Format
|
||||
-------------------------------
|
||||
|
||||
byte 0: 1 0 0 0 1 x9 x8 x7
|
||||
byte 1: 0 x6 x5 x4 x3 x2 x1 x0
|
||||
byte 2: 0 ? ? l r ? fin ges
|
||||
byte 3: 0 ? ? ? ? y9 y8 y7
|
||||
byte 4: 0 y6 y5 y4 y3 y2 y1 y0
|
||||
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
|
||||
|
||||
ALPS Absolute Mode - New Format
|
||||
-------------------------------
|
||||
|
||||
byte 0: 1 ? ? ? 1 ? ? ?
|
||||
byte 1: 0 x6 x5 x4 x3 x2 x1 x0
|
||||
byte 2: 0 x10 x9 x8 x7 ? fin ges
|
||||
byte 3: 0 y9 y8 y7 1 M R L
|
||||
byte 4: 0 y6 y5 y4 y3 y2 y1 y0
|
||||
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
|
||||
|
||||
Dualpoint device -- interleaved packet format
|
||||
---------------------------------------------
|
||||
|
||||
byte 0: 1 1 0 0 1 1 1 1
|
||||
byte 1: 0 x6 x5 x4 x3 x2 x1 x0
|
||||
byte 2: 0 x10 x9 x8 x7 0 fin ges
|
||||
byte 3: 0 0 YSGN XSGN 1 1 1 1
|
||||
byte 4: X7 X6 X5 X4 X3 X2 X1 X0
|
||||
byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
|
||||
byte 6: 0 y9 y8 y7 1 m r l
|
||||
byte 7: 0 y6 y5 y4 y3 y2 y1 y0
|
||||
byte 8: 0 z6 z5 z4 z3 z2 z1 z0
|
||||
|
|
@ -67,42 +67,7 @@ static const struct alps_model_info alps_model_data[] = {
|
|||
* isn't valid per PS/2 spec.
|
||||
*/
|
||||
|
||||
/*
|
||||
* PS/2 packet format
|
||||
*
|
||||
* byte 0: 0 0 YSGN XSGN 1 M R L
|
||||
* byte 1: X7 X6 X5 X4 X3 X2 X1 X0
|
||||
* byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
|
||||
*
|
||||
* Note that the device never signals overflow condition.
|
||||
*
|
||||
* ALPS absolute Mode - new format
|
||||
*
|
||||
* byte 0: 1 ? ? ? 1 ? ? ?
|
||||
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
|
||||
* byte 2: 0 x10 x9 x8 x7 ? fin ges
|
||||
* byte 3: 0 y9 y8 y7 1 M R L
|
||||
* byte 4: 0 y6 y5 y4 y3 y2 y1 y0
|
||||
* byte 5: 0 z6 z5 z4 z3 z2 z1 z0
|
||||
*
|
||||
* Dualpoint device -- interleaved packet format
|
||||
*
|
||||
* byte 0: 1 1 0 0 1 1 1 1
|
||||
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
|
||||
* byte 2: 0 x10 x9 x8 x7 0 fin ges
|
||||
* byte 3: 0 0 YSGN XSGN 1 1 1 1
|
||||
* byte 4: X7 X6 X5 X4 X3 X2 X1 X0
|
||||
* byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
|
||||
* byte 6: 0 y9 y8 y7 1 m r l
|
||||
* byte 7: 0 y6 y5 y4 y3 y2 y1 y0
|
||||
* byte 8: 0 z6 z5 z4 z3 z2 z1 z0
|
||||
*
|
||||
* CAPITALS = stick, miniscules = touchpad
|
||||
*
|
||||
* ?'s can have different meanings on different models,
|
||||
* such as wheel rotation, extra buttons, stick buttons
|
||||
* on a dualpoint, etc.
|
||||
*/
|
||||
/* Packet formats are described in Documentation/input/alps.txt */
|
||||
|
||||
static bool alps_is_valid_first_byte(const struct alps_model_info *model,
|
||||
unsigned char data)
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче