SERIAL: AR933X: Add driver for the built-in UART of the SoC
This patch adds the driver for the built-in UART of the Atheros AR933X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Kathy Giori <kgiori@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2526/ Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Gabor Juhos
Ralf Baechle
Родитель
c279b77596
Коммит
d57f341ba0
|
|
@ -0,0 +1,18 @@
|
|||
/*
|
||||
* Platform data definition for Atheros AR933X UART
|
||||
*
|
||||
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef _AR933X_UART_PLATFORM_H
|
||||
#define _AR933X_UART_PLATFORM_H
|
||||
|
||||
struct ar933x_uart_platform_data {
|
||||
unsigned uartclk;
|
||||
};
|
||||
|
||||
#endif /* _AR933X_UART_PLATFORM_H */
|
||||
|
|
@ -1610,4 +1610,27 @@ config SERIAL_XILINX_PS_UART_CONSOLE
|
|||
help
|
||||
Enable a Xilinx PS UART port to be the system console.
|
||||
|
||||
config SERIAL_AR933X
|
||||
bool "AR933X serial port support"
|
||||
depends on SOC_AR933X
|
||||
select SERIAL_CORE
|
||||
help
|
||||
If you have an Atheros AR933X SOC based board and want to use the
|
||||
built-in UART of the SoC, say Y to this option.
|
||||
|
||||
config SERIAL_AR933X_CONSOLE
|
||||
bool "Console on AR933X serial port"
|
||||
depends on SERIAL_AR933X=y
|
||||
select SERIAL_CORE_CONSOLE
|
||||
help
|
||||
Enable a built-in UART port of the AR933X to be the system console.
|
||||
|
||||
config SERIAL_AR933X_NR_UARTS
|
||||
int "Maximum number of AR933X serial ports"
|
||||
depends on SERIAL_AR933X
|
||||
default "2"
|
||||
help
|
||||
Set this to the number of serial ports you want the driver
|
||||
to support.
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
|
|||
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
|
||||
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
|
||||
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
|
||||
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,688 @@
|
|||
/*
|
||||
* Atheros AR933X SoC built-in UART driver
|
||||
*
|
||||
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/sysrq.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/tty_flip.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
|
||||
#include <asm/mach-ath79/ar933x_uart.h>
|
||||
#include <asm/mach-ath79/ar933x_uart_platform.h>
|
||||
|
||||
#define DRIVER_NAME "ar933x-uart"
|
||||
|
||||
#define AR933X_DUMMY_STATUS_RD 0x01
|
||||
|
||||
static struct uart_driver ar933x_uart_driver;
|
||||
|
||||
struct ar933x_uart_port {
|
||||
struct uart_port port;
|
||||
unsigned int ier; /* shadow Interrupt Enable Register */
|
||||
};
|
||||
|
||||
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
|
||||
int offset)
|
||||
{
|
||||
return readl(up->port.membase + offset);
|
||||
}
|
||||
|
||||
static inline void ar933x_uart_write(struct ar933x_uart_port *up,
|
||||
int offset, unsigned int value)
|
||||
{
|
||||
writel(value, up->port.membase + offset);
|
||||
}
|
||||
|
||||
static inline void ar933x_uart_rmw(struct ar933x_uart_port *up,
|
||||
unsigned int offset,
|
||||
unsigned int mask,
|
||||
unsigned int val)
|
||||
{
|
||||
unsigned int t;
|
||||
|
||||
t = ar933x_uart_read(up, offset);
|
||||
t &= ~mask;
|
||||
t |= val;
|
||||
ar933x_uart_write(up, offset, t);
|
||||
}
|
||||
|
||||
static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up,
|
||||
unsigned int offset,
|
||||
unsigned int val)
|
||||
{
|
||||
ar933x_uart_rmw(up, offset, 0, val);
|
||||
}
|
||||
|
||||
static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up,
|
||||
unsigned int offset,
|
||||
unsigned int val)
|
||||
{
|
||||
ar933x_uart_rmw(up, offset, val, 0);
|
||||
}
|
||||
|
||||
static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up)
|
||||
{
|
||||
up->ier |= AR933X_UART_INT_TX_EMPTY;
|
||||
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
||||
}
|
||||
|
||||
static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up)
|
||||
{
|
||||
up->ier &= ~AR933X_UART_INT_TX_EMPTY;
|
||||
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
||||
}
|
||||
|
||||
static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch)
|
||||
{
|
||||
unsigned int rdata;
|
||||
|
||||
rdata = ch & AR933X_UART_DATA_TX_RX_MASK;
|
||||
rdata |= AR933X_UART_DATA_TX_CSR;
|
||||
ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata);
|
||||
}
|
||||
|
||||
static unsigned int ar933x_uart_tx_empty(struct uart_port *port)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
unsigned long flags;
|
||||
unsigned int rdata;
|
||||
|
||||
spin_lock_irqsave(&up->port.lock, flags);
|
||||
rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
|
||||
spin_unlock_irqrestore(&up->port.lock, flags);
|
||||
|
||||
return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT;
|
||||
}
|
||||
|
||||
static unsigned int ar933x_uart_get_mctrl(struct uart_port *port)
|
||||
{
|
||||
return TIOCM_CAR;
|
||||
}
|
||||
|
||||
static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
||||
{
|
||||
}
|
||||
|
||||
static void ar933x_uart_start_tx(struct uart_port *port)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
|
||||
ar933x_uart_start_tx_interrupt(up);
|
||||
}
|
||||
|
||||
static void ar933x_uart_stop_tx(struct uart_port *port)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
|
||||
ar933x_uart_stop_tx_interrupt(up);
|
||||
}
|
||||
|
||||
static void ar933x_uart_stop_rx(struct uart_port *port)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
|
||||
up->ier &= ~AR933X_UART_INT_RX_VALID;
|
||||
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
||||
}
|
||||
|
||||
static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&up->port.lock, flags);
|
||||
if (break_state == -1)
|
||||
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
|
||||
AR933X_UART_CS_TX_BREAK);
|
||||
else
|
||||
ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
|
||||
AR933X_UART_CS_TX_BREAK);
|
||||
spin_unlock_irqrestore(&up->port.lock, flags);
|
||||
}
|
||||
|
||||
static void ar933x_uart_enable_ms(struct uart_port *port)
|
||||
{
|
||||
}
|
||||
|
||||
static void ar933x_uart_set_termios(struct uart_port *port,
|
||||
struct ktermios *new,
|
||||
struct ktermios *old)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
unsigned int cs;
|
||||
unsigned long flags;
|
||||
unsigned int baud, scale;
|
||||
|
||||
/* Only CS8 is supported */
|
||||
new->c_cflag &= ~CSIZE;
|
||||
new->c_cflag |= CS8;
|
||||
|
||||
/* Only one stop bit is supported */
|
||||
new->c_cflag &= ~CSTOPB;
|
||||
|
||||
cs = 0;
|
||||
if (new->c_cflag & PARENB) {
|
||||
if (!(new->c_cflag & PARODD))
|
||||
cs |= AR933X_UART_CS_PARITY_EVEN;
|
||||
else
|
||||
cs |= AR933X_UART_CS_PARITY_ODD;
|
||||
} else {
|
||||
cs |= AR933X_UART_CS_PARITY_NONE;
|
||||
}
|
||||
|
||||
/* Mark/space parity is not supported */
|
||||
new->c_cflag &= ~CMSPAR;
|
||||
|
||||
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
|
||||
scale = (port->uartclk / (16 * baud)) - 1;
|
||||
|
||||
/*
|
||||
* Ok, we're now changing the port state. Do it with
|
||||
* interrupts disabled.
|
||||
*/
|
||||
spin_lock_irqsave(&up->port.lock, flags);
|
||||
|
||||
/* Update the per-port timeout. */
|
||||
uart_update_timeout(port, new->c_cflag, baud);
|
||||
|
||||
up->port.ignore_status_mask = 0;
|
||||
|
||||
/* ignore all characters if CREAD is not set */
|
||||
if ((new->c_cflag & CREAD) == 0)
|
||||
up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
|
||||
|
||||
ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
|
||||
scale << AR933X_UART_CLOCK_SCALE_S | 8192);
|
||||
|
||||
/* setup configuration register */
|
||||
ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
|
||||
|
||||
/* enable host interrupt */
|
||||
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
|
||||
AR933X_UART_CS_HOST_INT_EN);
|
||||
|
||||
spin_unlock_irqrestore(&up->port.lock, flags);
|
||||
|
||||
if (tty_termios_baud_rate(new))
|
||||
tty_termios_encode_baud_rate(new, baud, baud);
|
||||
}
|
||||
|
||||
static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
|
||||
{
|
||||
struct tty_struct *tty;
|
||||
int max_count = 256;
|
||||
|
||||
tty = tty_port_tty_get(&up->port.state->port);
|
||||
do {
|
||||
unsigned int rdata;
|
||||
unsigned char ch;
|
||||
|
||||
rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
|
||||
if ((rdata & AR933X_UART_DATA_RX_CSR) == 0)
|
||||
break;
|
||||
|
||||
/* remove the character from the FIFO */
|
||||
ar933x_uart_write(up, AR933X_UART_DATA_REG,
|
||||
AR933X_UART_DATA_RX_CSR);
|
||||
|
||||
if (!tty) {
|
||||
/* discard the data if no tty available */
|
||||
continue;
|
||||
}
|
||||
|
||||
up->port.icount.rx++;
|
||||
ch = rdata & AR933X_UART_DATA_TX_RX_MASK;
|
||||
|
||||
if (uart_handle_sysrq_char(&up->port, ch))
|
||||
continue;
|
||||
|
||||
if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0)
|
||||
tty_insert_flip_char(tty, ch, TTY_NORMAL);
|
||||
} while (max_count-- > 0);
|
||||
|
||||
if (tty) {
|
||||
tty_flip_buffer_push(tty);
|
||||
tty_kref_put(tty);
|
||||
}
|
||||
}
|
||||
|
||||
static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
|
||||
{
|
||||
struct circ_buf *xmit = &up->port.state->xmit;
|
||||
int count;
|
||||
|
||||
if (uart_tx_stopped(&up->port))
|
||||
return;
|
||||
|
||||
count = up->port.fifosize;
|
||||
do {
|
||||
unsigned int rdata;
|
||||
|
||||
rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
|
||||
if ((rdata & AR933X_UART_DATA_TX_CSR) == 0)
|
||||
break;
|
||||
|
||||
if (up->port.x_char) {
|
||||
ar933x_uart_putc(up, up->port.x_char);
|
||||
up->port.icount.tx++;
|
||||
up->port.x_char = 0;
|
||||
continue;
|
||||
}
|
||||
|
||||
if (uart_circ_empty(xmit))
|
||||
break;
|
||||
|
||||
ar933x_uart_putc(up, xmit->buf[xmit->tail]);
|
||||
|
||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||||
up->port.icount.tx++;
|
||||
} while (--count > 0);
|
||||
|
||||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||||
uart_write_wakeup(&up->port);
|
||||
|
||||
if (!uart_circ_empty(xmit))
|
||||
ar933x_uart_start_tx_interrupt(up);
|
||||
}
|
||||
|
||||
static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct ar933x_uart_port *up = dev_id;
|
||||
unsigned int status;
|
||||
|
||||
status = ar933x_uart_read(up, AR933X_UART_CS_REG);
|
||||
if ((status & AR933X_UART_CS_HOST_INT) == 0)
|
||||
return IRQ_NONE;
|
||||
|
||||
spin_lock(&up->port.lock);
|
||||
|
||||
status = ar933x_uart_read(up, AR933X_UART_INT_REG);
|
||||
status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
|
||||
|
||||
if (status & AR933X_UART_INT_RX_VALID) {
|
||||
ar933x_uart_write(up, AR933X_UART_INT_REG,
|
||||
AR933X_UART_INT_RX_VALID);
|
||||
ar933x_uart_rx_chars(up);
|
||||
}
|
||||
|
||||
if (status & AR933X_UART_INT_TX_EMPTY) {
|
||||
ar933x_uart_write(up, AR933X_UART_INT_REG,
|
||||
AR933X_UART_INT_TX_EMPTY);
|
||||
ar933x_uart_stop_tx_interrupt(up);
|
||||
ar933x_uart_tx_chars(up);
|
||||
}
|
||||
|
||||
spin_unlock(&up->port.lock);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int ar933x_uart_startup(struct uart_port *port)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
unsigned long flags;
|
||||
int ret;
|
||||
|
||||
ret = request_irq(up->port.irq, ar933x_uart_interrupt,
|
||||
up->port.irqflags, dev_name(up->port.dev), up);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
spin_lock_irqsave(&up->port.lock, flags);
|
||||
|
||||
/* Enable HOST interrupts */
|
||||
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
|
||||
AR933X_UART_CS_HOST_INT_EN);
|
||||
|
||||
/* Enable RX interrupts */
|
||||
up->ier = AR933X_UART_INT_RX_VALID;
|
||||
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
||||
|
||||
spin_unlock_irqrestore(&up->port.lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ar933x_uart_shutdown(struct uart_port *port)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
|
||||
/* Disable all interrupts */
|
||||
up->ier = 0;
|
||||
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
||||
|
||||
/* Disable break condition */
|
||||
ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
|
||||
AR933X_UART_CS_TX_BREAK);
|
||||
|
||||
free_irq(up->port.irq, up);
|
||||
}
|
||||
|
||||
static const char *ar933x_uart_type(struct uart_port *port)
|
||||
{
|
||||
return (port->type == PORT_AR933X) ? "AR933X UART" : NULL;
|
||||
}
|
||||
|
||||
static void ar933x_uart_release_port(struct uart_port *port)
|
||||
{
|
||||
/* Nothing to release ... */
|
||||
}
|
||||
|
||||
static int ar933x_uart_request_port(struct uart_port *port)
|
||||
{
|
||||
/* UARTs always present */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ar933x_uart_config_port(struct uart_port *port, int flags)
|
||||
{
|
||||
if (flags & UART_CONFIG_TYPE)
|
||||
port->type = PORT_AR933X;
|
||||
}
|
||||
|
||||
static int ar933x_uart_verify_port(struct uart_port *port,
|
||||
struct serial_struct *ser)
|
||||
{
|
||||
if (ser->type != PORT_UNKNOWN &&
|
||||
ser->type != PORT_AR933X)
|
||||
return -EINVAL;
|
||||
|
||||
if (ser->irq < 0 || ser->irq >= NR_IRQS)
|
||||
return -EINVAL;
|
||||
|
||||
if (ser->baud_base < 28800)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct uart_ops ar933x_uart_ops = {
|
||||
.tx_empty = ar933x_uart_tx_empty,
|
||||
.set_mctrl = ar933x_uart_set_mctrl,
|
||||
.get_mctrl = ar933x_uart_get_mctrl,
|
||||
.stop_tx = ar933x_uart_stop_tx,
|
||||
.start_tx = ar933x_uart_start_tx,
|
||||
.stop_rx = ar933x_uart_stop_rx,
|
||||
.enable_ms = ar933x_uart_enable_ms,
|
||||
.break_ctl = ar933x_uart_break_ctl,
|
||||
.startup = ar933x_uart_startup,
|
||||
.shutdown = ar933x_uart_shutdown,
|
||||
.set_termios = ar933x_uart_set_termios,
|
||||
.type = ar933x_uart_type,
|
||||
.release_port = ar933x_uart_release_port,
|
||||
.request_port = ar933x_uart_request_port,
|
||||
.config_port = ar933x_uart_config_port,
|
||||
.verify_port = ar933x_uart_verify_port,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_SERIAL_AR933X_CONSOLE
|
||||
|
||||
static struct ar933x_uart_port *
|
||||
ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
|
||||
|
||||
static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up)
|
||||
{
|
||||
unsigned int status;
|
||||
unsigned int timeout = 60000;
|
||||
|
||||
/* Wait up to 60ms for the character(s) to be sent. */
|
||||
do {
|
||||
status = ar933x_uart_read(up, AR933X_UART_DATA_REG);
|
||||
if (--timeout == 0)
|
||||
break;
|
||||
udelay(1);
|
||||
} while ((status & AR933X_UART_DATA_TX_CSR) == 0);
|
||||
}
|
||||
|
||||
static void ar933x_uart_console_putchar(struct uart_port *port, int ch)
|
||||
{
|
||||
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
||||
|
||||
ar933x_uart_wait_xmitr(up);
|
||||
ar933x_uart_putc(up, ch);
|
||||
}
|
||||
|
||||
static void ar933x_uart_console_write(struct console *co, const char *s,
|
||||
unsigned int count)
|
||||
{
|
||||
struct ar933x_uart_port *up = ar933x_console_ports[co->index];
|
||||
unsigned long flags;
|
||||
unsigned int int_en;
|
||||
int locked = 1;
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
if (up->port.sysrq)
|
||||
locked = 0;
|
||||
else if (oops_in_progress)
|
||||
locked = spin_trylock(&up->port.lock);
|
||||
else
|
||||
spin_lock(&up->port.lock);
|
||||
|
||||
/*
|
||||
* First save the IER then disable the interrupts
|
||||
*/
|
||||
int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
|
||||
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0);
|
||||
|
||||
uart_console_write(&up->port, s, count, ar933x_uart_console_putchar);
|
||||
|
||||
/*
|
||||
* Finally, wait for transmitter to become empty
|
||||
* and restore the IER
|
||||
*/
|
||||
ar933x_uart_wait_xmitr(up);
|
||||
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en);
|
||||
|
||||
ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS);
|
||||
|
||||
if (locked)
|
||||
spin_unlock(&up->port.lock);
|
||||
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static int ar933x_uart_console_setup(struct console *co, char *options)
|
||||
{
|
||||
struct ar933x_uart_port *up;
|
||||
int baud = 115200;
|
||||
int bits = 8;
|
||||
int parity = 'n';
|
||||
int flow = 'n';
|
||||
|
||||
if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS)
|
||||
return -EINVAL;
|
||||
|
||||
up = ar933x_console_ports[co->index];
|
||||
if (!up)
|
||||
return -ENODEV;
|
||||
|
||||
if (options)
|
||||
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||||
|
||||
return uart_set_options(&up->port, co, baud, parity, bits, flow);
|
||||
}
|
||||
|
||||
static struct console ar933x_uart_console = {
|
||||
.name = "ttyATH",
|
||||
.write = ar933x_uart_console_write,
|
||||
.device = uart_console_device,
|
||||
.setup = ar933x_uart_console_setup,
|
||||
.flags = CON_PRINTBUFFER,
|
||||
.index = -1,
|
||||
.data = &ar933x_uart_driver,
|
||||
};
|
||||
|
||||
static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
|
||||
{
|
||||
ar933x_console_ports[up->port.line] = up;
|
||||
}
|
||||
|
||||
#define AR933X_SERIAL_CONSOLE (&ar933x_uart_console)
|
||||
|
||||
#else
|
||||
|
||||
static inline void ar933x_uart_add_console_port(struct ar933x_uart_port *up) {}
|
||||
|
||||
#define AR933X_SERIAL_CONSOLE NULL
|
||||
|
||||
#endif /* CONFIG_SERIAL_AR933X_CONSOLE */
|
||||
|
||||
static struct uart_driver ar933x_uart_driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.driver_name = DRIVER_NAME,
|
||||
.dev_name = "ttyATH",
|
||||
.nr = CONFIG_SERIAL_AR933X_NR_UARTS,
|
||||
.cons = AR933X_SERIAL_CONSOLE,
|
||||
};
|
||||
|
||||
static int __devinit ar933x_uart_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct ar933x_uart_platform_data *pdata;
|
||||
struct ar933x_uart_port *up;
|
||||
struct uart_port *port;
|
||||
struct resource *mem_res;
|
||||
struct resource *irq_res;
|
||||
int id;
|
||||
int ret;
|
||||
|
||||
pdata = pdev->dev.platform_data;
|
||||
if (!pdata)
|
||||
return -EINVAL;
|
||||
|
||||
id = pdev->id;
|
||||
if (id == -1)
|
||||
id = 0;
|
||||
|
||||
if (id > CONFIG_SERIAL_AR933X_NR_UARTS)
|
||||
return -EINVAL;
|
||||
|
||||
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!mem_res) {
|
||||
dev_err(&pdev->dev, "no MEM resource\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
||||
if (!irq_res) {
|
||||
dev_err(&pdev->dev, "no IRQ resource\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL);
|
||||
if (!up)
|
||||
return -ENOMEM;
|
||||
|
||||
port = &up->port;
|
||||
port->mapbase = mem_res->start;
|
||||
|
||||
port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE);
|
||||
if (!port->membase) {
|
||||
ret = -ENOMEM;
|
||||
goto err_free_up;
|
||||
}
|
||||
|
||||
port->line = id;
|
||||
port->irq = irq_res->start;
|
||||
port->dev = &pdev->dev;
|
||||
port->type = PORT_AR933X;
|
||||
port->iotype = UPIO_MEM32;
|
||||
port->uartclk = pdata->uartclk;
|
||||
|
||||
port->regshift = 2;
|
||||
port->fifosize = AR933X_UART_FIFO_SIZE;
|
||||
port->ops = &ar933x_uart_ops;
|
||||
|
||||
ar933x_uart_add_console_port(up);
|
||||
|
||||
ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
|
||||
if (ret)
|
||||
goto err_unmap;
|
||||
|
||||
platform_set_drvdata(pdev, up);
|
||||
return 0;
|
||||
|
||||
err_unmap:
|
||||
iounmap(up->port.membase);
|
||||
err_free_up:
|
||||
kfree(up);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit ar933x_uart_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct ar933x_uart_port *up;
|
||||
|
||||
up = platform_get_drvdata(pdev);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
if (up) {
|
||||
uart_remove_one_port(&ar933x_uart_driver, &up->port);
|
||||
iounmap(up->port.membase);
|
||||
kfree(up);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver ar933x_uart_platform_driver = {
|
||||
.probe = ar933x_uart_probe,
|
||||
.remove = __devexit_p(ar933x_uart_remove),
|
||||
.driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init ar933x_uart_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ar933x_uart_driver.nr = CONFIG_SERIAL_AR933X_NR_UARTS;
|
||||
ret = uart_register_driver(&ar933x_uart_driver);
|
||||
if (ret)
|
||||
goto err_out;
|
||||
|
||||
ret = platform_driver_register(&ar933x_uart_platform_driver);
|
||||
if (ret)
|
||||
goto err_unregister_uart_driver;
|
||||
|
||||
return 0;
|
||||
|
||||
err_unregister_uart_driver:
|
||||
uart_unregister_driver(&ar933x_uart_driver);
|
||||
err_out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void __exit ar933x_uart_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&ar933x_uart_platform_driver);
|
||||
uart_unregister_driver(&ar933x_uart_driver);
|
||||
}
|
||||
|
||||
module_init(ar933x_uart_init);
|
||||
module_exit(ar933x_uart_exit);
|
||||
|
||||
MODULE_DESCRIPTION("Atheros AR933X UART driver");
|
||||
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("platform:" DRIVER_NAME);
|
||||
|
|
@ -207,6 +207,10 @@
|
|||
/* Xilinx PSS UART */
|
||||
#define PORT_XUARTPS 98
|
||||
|
||||
/* Atheros AR933X SoC */
|
||||
#define PORT_AR933X 99
|
||||
|
||||
|
||||
#ifdef __KERNEL__
|
||||
|
||||
#include <linux/compiler.h>
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче