ASoC: Convert WM8903 driver to register at I2C probe time
The driver now registers the codec and DAI when probed as an I2C device. Also convert the driver to use a single dynamic allocation to simplify error handling. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Mark Brown
Родитель
78e19a39d3
Коммит
d58d5d5567
|
|
@ -33,19 +33,6 @@
|
|||
|
||||
#include "wm8903.h"
|
||||
|
||||
struct wm8903_priv {
|
||||
int sysclk;
|
||||
|
||||
/* Reference counts */
|
||||
int charge_pump_users;
|
||||
int class_w_users;
|
||||
int playback_active;
|
||||
int capture_active;
|
||||
|
||||
struct snd_pcm_substream *master_substream;
|
||||
struct snd_pcm_substream *slave_substream;
|
||||
};
|
||||
|
||||
/* Register defaults at reset */
|
||||
static u16 wm8903_reg_defaults[] = {
|
||||
0x8903, /* R0 - SW Reset and ID */
|
||||
|
|
@ -223,6 +210,23 @@ static u16 wm8903_reg_defaults[] = {
|
|||
0x0000, /* R172 - Analogue Output Bias 0 */
|
||||
};
|
||||
|
||||
struct wm8903_priv {
|
||||
struct snd_soc_codec codec;
|
||||
u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)];
|
||||
|
||||
int sysclk;
|
||||
|
||||
/* Reference counts */
|
||||
int charge_pump_users;
|
||||
int class_w_users;
|
||||
int playback_active;
|
||||
int capture_active;
|
||||
|
||||
struct snd_pcm_substream *master_substream;
|
||||
struct snd_pcm_substream *slave_substream;
|
||||
};
|
||||
|
||||
|
||||
static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec,
|
||||
unsigned int reg)
|
||||
{
|
||||
|
|
@ -360,6 +364,8 @@ static void wm8903_sync_reg_cache(struct snd_soc_codec *codec, u16 *cache)
|
|||
static void wm8903_reset(struct snd_soc_codec *codec)
|
||||
{
|
||||
wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0);
|
||||
memcpy(codec->reg_cache, wm8903_reg_defaults,
|
||||
sizeof(wm8903_reg_defaults));
|
||||
}
|
||||
|
||||
#define WM8903_OUTPUT_SHORT 0x8
|
||||
|
|
@ -1563,17 +1569,43 @@ static int wm8903_resume(struct platform_device *pdev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* initialise the WM8903 driver
|
||||
* register the mixer and dsp interfaces with the kernel
|
||||
*/
|
||||
static int wm8903_init(struct snd_soc_device *socdev)
|
||||
static struct snd_soc_codec *wm8903_codec;
|
||||
|
||||
static int wm8903_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct snd_soc_codec *codec = socdev->codec;
|
||||
struct i2c_client *i2c = codec->control_data;
|
||||
int ret = 0;
|
||||
struct wm8903_priv *wm8903;
|
||||
struct snd_soc_codec *codec;
|
||||
int ret;
|
||||
u16 val;
|
||||
|
||||
wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
|
||||
if (wm8903 == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
codec = &wm8903->codec;
|
||||
|
||||
mutex_init(&codec->mutex);
|
||||
INIT_LIST_HEAD(&codec->dapm_widgets);
|
||||
INIT_LIST_HEAD(&codec->dapm_paths);
|
||||
|
||||
codec->dev = &i2c->dev;
|
||||
codec->name = "WM8903";
|
||||
codec->owner = THIS_MODULE;
|
||||
codec->read = wm8903_read;
|
||||
codec->write = wm8903_write;
|
||||
codec->hw_write = (hw_write_t)i2c_master_send;
|
||||
codec->bias_level = SND_SOC_BIAS_OFF;
|
||||
codec->set_bias_level = wm8903_set_bias_level;
|
||||
codec->dai = &wm8903_dai;
|
||||
codec->num_dai = 1;
|
||||
codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
|
||||
codec->reg_cache = &wm8903->reg_cache[0];
|
||||
codec->private_data = wm8903;
|
||||
|
||||
i2c_set_clientdata(i2c, codec);
|
||||
codec->control_data = i2c;
|
||||
|
||||
val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
|
||||
if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
|
||||
dev_err(&i2c->dev,
|
||||
|
|
@ -1581,36 +1613,12 @@ static int wm8903_init(struct snd_soc_device *socdev)
|
|||
return -ENODEV;
|
||||
}
|
||||
|
||||
codec->name = "WM8903";
|
||||
codec->owner = THIS_MODULE;
|
||||
codec->read = wm8903_read;
|
||||
codec->write = wm8903_write;
|
||||
codec->bias_level = SND_SOC_BIAS_OFF;
|
||||
codec->set_bias_level = wm8903_set_bias_level;
|
||||
codec->dai = &wm8903_dai;
|
||||
codec->num_dai = 1;
|
||||
codec->reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults);
|
||||
codec->reg_cache = kmemdup(wm8903_reg_defaults,
|
||||
sizeof(wm8903_reg_defaults),
|
||||
GFP_KERNEL);
|
||||
if (codec->reg_cache == NULL) {
|
||||
dev_err(&i2c->dev, "Failed to allocate register cache\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
val = wm8903_read(codec, WM8903_REVISION_NUMBER);
|
||||
dev_info(&i2c->dev, "WM8903 revision %d\n",
|
||||
val & WM8903_CHIP_REV_MASK);
|
||||
|
||||
wm8903_reset(codec);
|
||||
|
||||
/* register pcms */
|
||||
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
|
||||
if (ret < 0) {
|
||||
dev_err(&i2c->dev, "failed to create pcms\n");
|
||||
goto pcm_err;
|
||||
}
|
||||
|
||||
/* SYSCLK is required for pretty much anything */
|
||||
wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA);
|
||||
|
||||
|
|
@ -1648,47 +1656,45 @@ static int wm8903_init(struct snd_soc_device *socdev)
|
|||
val |= WM8903_DAC_MUTEMODE;
|
||||
wm8903_write(codec, WM8903_DAC_DIGITAL_1, val);
|
||||
|
||||
wm8903_add_controls(codec);
|
||||
wm8903_add_widgets(codec);
|
||||
ret = snd_soc_init_card(socdev);
|
||||
if (ret < 0) {
|
||||
dev_err(&i2c->dev, "wm8903: failed to register card\n");
|
||||
goto card_err;
|
||||
wm8903_dai.dev = &i2c->dev;
|
||||
wm8903_codec = codec;
|
||||
|
||||
ret = snd_soc_register_codec(codec);
|
||||
if (ret != 0) {
|
||||
dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
|
||||
goto err;
|
||||
}
|
||||
|
||||
ret = snd_soc_register_dai(&wm8903_dai);
|
||||
if (ret != 0) {
|
||||
dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret);
|
||||
goto err_codec;
|
||||
}
|
||||
|
||||
return ret;
|
||||
|
||||
card_err:
|
||||
snd_soc_free_pcms(socdev);
|
||||
snd_soc_dapm_free(socdev);
|
||||
pcm_err:
|
||||
kfree(codec->reg_cache);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct snd_soc_device *wm8903_socdev;
|
||||
|
||||
static int wm8903_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct snd_soc_device *socdev = wm8903_socdev;
|
||||
struct snd_soc_codec *codec = socdev->codec;
|
||||
int ret;
|
||||
|
||||
i2c_set_clientdata(i2c, codec);
|
||||
codec->control_data = i2c;
|
||||
|
||||
ret = wm8903_init(socdev);
|
||||
if (ret < 0)
|
||||
dev_err(&i2c->dev, "Device initialisation failed\n");
|
||||
|
||||
err_codec:
|
||||
snd_soc_unregister_codec(codec);
|
||||
err:
|
||||
wm8903_codec = NULL;
|
||||
kfree(wm8903);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int wm8903_i2c_remove(struct i2c_client *client)
|
||||
{
|
||||
struct snd_soc_codec *codec = i2c_get_clientdata(client);
|
||||
kfree(codec->reg_cache);
|
||||
|
||||
snd_soc_unregister_dai(&wm8903_dai);
|
||||
snd_soc_unregister_codec(codec);
|
||||
|
||||
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
||||
|
||||
kfree(codec->private_data);
|
||||
|
||||
wm8903_codec = NULL;
|
||||
wm8903_dai.dev = NULL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -1712,75 +1718,37 @@ static struct i2c_driver wm8903_i2c_driver = {
|
|||
static int wm8903_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
||||
struct wm8903_setup_data *setup;
|
||||
struct snd_soc_codec *codec;
|
||||
struct wm8903_priv *wm8903;
|
||||
struct i2c_board_info board_info;
|
||||
struct i2c_adapter *adapter;
|
||||
struct i2c_client *i2c_client;
|
||||
int ret = 0;
|
||||
|
||||
setup = socdev->codec_data;
|
||||
|
||||
if (!setup->i2c_address) {
|
||||
dev_err(&pdev->dev, "No codec address provided\n");
|
||||
return -ENODEV;
|
||||
if (!wm8903_codec) {
|
||||
dev_err(&pdev->dev, "I2C device not yet probed\n");
|
||||
goto err;
|
||||
}
|
||||
|
||||
codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
|
||||
if (codec == NULL)
|
||||
return -ENOMEM;
|
||||
socdev->codec = wm8903_codec;
|
||||
|
||||
wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
|
||||
if (wm8903 == NULL) {
|
||||
ret = -ENOMEM;
|
||||
goto err_codec;
|
||||
/* register pcms */
|
||||
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "failed to create pcms\n");
|
||||
goto err;
|
||||
}
|
||||
|
||||
codec->private_data = wm8903;
|
||||
socdev->codec = codec;
|
||||
mutex_init(&codec->mutex);
|
||||
INIT_LIST_HEAD(&codec->dapm_widgets);
|
||||
INIT_LIST_HEAD(&codec->dapm_paths);
|
||||
wm8903_add_controls(socdev->codec);
|
||||
wm8903_add_widgets(socdev->codec);
|
||||
|
||||
wm8903_socdev = socdev;
|
||||
|
||||
codec->hw_write = (hw_write_t)i2c_master_send;
|
||||
ret = i2c_add_driver(&wm8903_i2c_driver);
|
||||
if (ret != 0) {
|
||||
dev_err(&pdev->dev, "can't add i2c driver\n");
|
||||
goto err_priv;
|
||||
} else {
|
||||
memset(&board_info, 0, sizeof(board_info));
|
||||
strlcpy(board_info.type, "wm8903", I2C_NAME_SIZE);
|
||||
board_info.addr = setup->i2c_address;
|
||||
|
||||
adapter = i2c_get_adapter(setup->i2c_bus);
|
||||
if (!adapter) {
|
||||
dev_err(&pdev->dev, "Can't get I2C bus %d\n",
|
||||
setup->i2c_bus);
|
||||
ret = -ENODEV;
|
||||
goto err_adapter;
|
||||
}
|
||||
|
||||
i2c_client = i2c_new_device(adapter, &board_info);
|
||||
i2c_put_adapter(adapter);
|
||||
if (i2c_client == NULL) {
|
||||
dev_err(&pdev->dev,
|
||||
"I2C driver registration failed\n");
|
||||
ret = -ENODEV;
|
||||
goto err_adapter;
|
||||
}
|
||||
ret = snd_soc_init_card(socdev);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "wm8903: failed to register card\n");
|
||||
goto card_err;
|
||||
}
|
||||
|
||||
return ret;
|
||||
|
||||
err_adapter:
|
||||
i2c_del_driver(&wm8903_i2c_driver);
|
||||
err_priv:
|
||||
kfree(codec->private_data);
|
||||
err_codec:
|
||||
kfree(codec);
|
||||
card_err:
|
||||
snd_soc_free_pcms(socdev);
|
||||
snd_soc_dapm_free(socdev);
|
||||
err:
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
|
@ -1795,10 +1763,6 @@ static int wm8903_remove(struct platform_device *pdev)
|
|||
|
||||
snd_soc_free_pcms(socdev);
|
||||
snd_soc_dapm_free(socdev);
|
||||
i2c_unregister_device(socdev->codec->control_data);
|
||||
i2c_del_driver(&wm8903_i2c_driver);
|
||||
kfree(codec->private_data);
|
||||
kfree(codec);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1813,13 +1777,13 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
|
|||
|
||||
static int __init wm8903_modinit(void)
|
||||
{
|
||||
return snd_soc_register_dai(&wm8903_dai);
|
||||
return i2c_add_driver(&wm8903_i2c_driver);
|
||||
}
|
||||
module_init(wm8903_modinit);
|
||||
|
||||
static void __exit wm8903_exit(void)
|
||||
{
|
||||
snd_soc_unregister_dai(&wm8903_dai);
|
||||
i2c_del_driver(&wm8903_i2c_driver);
|
||||
}
|
||||
module_exit(wm8903_exit);
|
||||
|
||||
|
|
|
|||
|
|
@ -18,11 +18,6 @@
|
|||
extern struct snd_soc_dai wm8903_dai;
|
||||
extern struct snd_soc_codec_device soc_codec_dev_wm8903;
|
||||
|
||||
struct wm8903_setup_data {
|
||||
int i2c_bus;
|
||||
int i2c_address;
|
||||
};
|
||||
|
||||
#define WM8903_MCLK_DIV_2 1
|
||||
#define WM8903_CLK_SYS 2
|
||||
#define WM8903_BCLK 3
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче