staging: mt7621-dts: add dts files

Add device tree source for mt7621 and gnubee1 to
make testing easier.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
NeilBrown 2018-03-15 07:22:36 +11:00 коммит произвёл Greg Kroah-Hartman
Родитель 792c11c819
Коммит d59578da2b
7 изменённых файлов: 630 добавлений и 0 удалений

Просмотреть файл

@ -130,4 +130,6 @@ source "drivers/staging/mt7621-mmc/Kconfig"
source "drivers/staging/mt7621-eth/Kconfig"
source "drivers/staging/mt7621-dts/Kconfig"
endif # STAGING

Просмотреть файл

@ -56,3 +56,4 @@ obj-$(CONFIG_SOC_MT7621) += mt7621-spi/
obj-$(CONFIG_SOC_MT7621) += mt7621-dma/
obj-$(CONFIG_SOC_MT7621) += mt7621-mmc/
obj-$(CONFIG_SOC_MT7621) += mt7621-eth/
obj-$(CONFIG_SOC_MT7621) += mt7621-dts/

Просмотреть файл

@ -0,0 +1,5 @@
config DTB_GNUBEE1
bool "GnuBee1 NAS"
depends on SOC_MT7621 && DTB_RT_NONE
select BUILTIN_DTB

Просмотреть файл

@ -0,0 +1,3 @@
dtb-$(CONFIG_DTB_GNUBEE1) += gbpc1.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))

Просмотреть файл

@ -0,0 +1,5 @@
- ensure all usage matches code
- ensure all features used are documented
Cc: NeilBrown <neil@brown.name>

Просмотреть файл

@ -0,0 +1,143 @@
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc";
model = "GB-PC1";
memory@0 {
device_type = "memory";
reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
palmbus: palmbus@1E000000 {
i2c@900 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
system {
label = "gb-pc1:green:system";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
status {
label = "gb-pc1:green:status";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "gb-pc1:green:lan1";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "gb-pc1:green:lan2";
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
};
};
&sdhci {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xFB0000>;
};
};
};
&sysclock {
compatible = "fixed-clock";
clock-frequency = <90000000>;
};
&cpuclock {
compatible = "fixed-clock";
clock-frequency = <900000000>;
};
&pcie {
status = "okay";
};
&ethernet {
//mtd-mac-address = <&factory 0xe000>;
gmac1: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-handle = <&phy1>;
};
mdio-bus {
phy1: ethernet-phy@1 {
reg = <1>;
phy-mode = "rgmii";
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "rgmii2", "uart3";
ralink,function = "gpio";
};
};
};

Просмотреть файл

@ -0,0 +1,471 @@
#include <dt-bindings/interrupt-controller/mips-gic.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mediatek,mt7621-soc";
cpus {
cpu@0 {
compatible = "mips,mips1004Kc";
};
cpu@1 {
compatible = "mips,mips1004Kc";
};
};
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
aliases {
serial0 = &uartlite;
};
cpuclock: cpuclock@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
/* FIXME: there should be way to detect this */
clock-frequency = <880000000>;
};
sysclock: sysclock@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
/* FIXME: there should be way to detect this */
clock-frequency = <50000000>;
};
palmbus: palmbus@1E000000 {
compatible = "palmbus";
reg = <0x1E000000 0x100000>;
ranges = <0x0 0x1E000000 0x0FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
sysc: sysc@0 {
compatible = "mtk,mt7621-sysc";
reg = <0x0 0x100>;
};
wdt: wdt@100 {
compatible = "mtk,mt7621-wdt";
reg = <0x100 0x100>;
};
gpio@600 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mtk,mt7621-gpio";
reg = <0x600 0x100>;
gpio0: bank@0 {
reg = <0>;
compatible = "mtk,mt7621-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
};
gpio1: bank@1 {
reg = <1>;
compatible = "mtk,mt7621-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
};
gpio2: bank@2 {
reg = <2>;
compatible = "mtk,mt7621-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
};
};
i2c: i2c@900 {
compatible = "mediatek,mt7621-i2c";
reg = <0x900 0x100>;
clocks = <&sysclock>;
resets = <&rstctrl 16>;
reset-names = "i2c";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins>;
};
i2s: i2s@a00 {
compatible = "mediatek,mt7621-i2s";
reg = <0xa00 0x100>;
clocks = <&sysclock>;
resets = <&rstctrl 17>;
reset-names = "i2s";
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>;
txdma-req = <2>;
rxdma-req = <3>;
dmas = <&gdma 4>,
<&gdma 6>;
dma-names = "tx", "rx";
status = "disabled";
};
memc: memc@5000 {
compatible = "mtk,mt7621-memc";
reg = <0x300 0x100>;
};
cpc: cpc@1fbf0000 {
compatible = "mtk,mt7621-cpc";
reg = <0x1fbf0000 0x8000>;
};
mc: mc@1fbf8000 {
compatible = "mtk,mt7621-mc";
reg = <0x1fbf8000 0x8000>;
};
uartlite: uartlite@c00 {
compatible = "ns16550a";
reg = <0xc00 0x100>;
clocks = <&sysclock>;
clock-frequency = <50000000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
no-loopback-test;
};
spi0: spi@b00 {
status = "disabled";
compatible = "ralink,mt7621-spi";
reg = <0xb00 0x100>;
clocks = <&sysclock>;
resets = <&rstctrl 18>;
reset-names = "spi";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>;
};
gdma: gdma@2800 {
compatible = "ralink,rt3883-gdma";
reg = <0x2800 0x800>;
resets = <&rstctrl 14>;
reset-names = "dma";
interrupt-parent = <&gic>;
interrupts = <0 13 4>;
#dma-cells = <1>;
#dma-channels = <16>;
#dma-requests = <16>;
status = "disabled";
};
hsdma: hsdma@7000 {
compatible = "mediatek,mt7621-hsdma";
reg = <0x7000 0x1000>;
resets = <&rstctrl 5>;
reset-names = "hsdma";
interrupt-parent = <&gic>;
interrupts = <0 11 4>;
#dma-cells = <1>;
#dma-channels = <1>;
#dma-requests = <1>;
status = "disabled";
};
};
pinctrl: pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinctrl0 {
};
i2c_pins: i2c {
i2c {
ralink,group = "i2c";
ralink,function = "i2c";
};
};
spi_pins: spi {
spi {
ralink,group = "spi";
ralink,function = "spi";
};
};
uart1_pins: uart1 {
uart1 {
ralink,group = "uart1";
ralink,function = "uart1";
};
};
uart2_pins: uart2 {
uart2 {
ralink,group = "uart2";
ralink,function = "uart2";
};
};
uart3_pins: uart3 {
uart3 {
ralink,group = "uart3";
ralink,function = "uart3";
};
};
rgmii1_pins: rgmii1 {
rgmii1 {
ralink,group = "rgmii1";
ralink,function = "rgmii1";
};
};
rgmii2_pins: rgmii2 {
rgmii2 {
ralink,group = "rgmii2";
ralink,function = "rgmii2";
};
};
mdio_pins: mdio {
mdio {
ralink,group = "mdio";
ralink,function = "mdio";
};
};
pcie_pins: pcie {
pcie {
ralink,group = "pcie";
ralink,function = "pcie rst";
};
};
nand_pins: nand {
spi-nand {
ralink,group = "spi";
ralink,function = "nand1";
};
sdhci-nand {
ralink,group = "sdhci";
ralink,function = "nand2";
};
};
sdhci_pins: sdhci {
sdhci {
ralink,group = "sdhci";
ralink,function = "sdhci";
};
};
};
rstctrl: rstctrl {
compatible = "ralink,rt2880-reset";
#reset-cells = <1>;
};
clkctrl: clkctrl {
compatible = "ralink,rt2880-clock";
#clock-cells = <1>;
};
sdhci: sdhci@1E130000 {
status = "disabled";
compatible = "ralink,mt7620-sdhci";
reg = <0x1E130000 0x4000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
};
xhci: xhci@1E1C0000 {
status = "okay";
compatible = "mediatek,mt8173-xhci";
reg = <0x1e1c0000 0x1000
0x1e1d0700 0x0100>;
reg-names = "mac", "ippc";
clocks = <&sysclock>;
clock-names = "sys_ck";
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
};
gic: interrupt-controller@1fbc0000 {
compatible = "mti,gic";
reg = <0x1fbc0000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
mti,reserved-cpu-vectors = <7>;
timer {
compatible = "mti,gic-timer";
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
clocks = <&cpuclock>;
};
};
nand: nand@1e003000 {
status = "disabled";
compatible = "mtk,mt7621-nand";
bank-width = <2>;
reg = <0x1e003000 0x800
0x1e003800 0x800>;
#address-cells = <1>;
#size-cells = <1>;
};
ethsys: syscon@1e000000 {
compatible = "mediatek,mt7621-ethsys",
"syscon";
reg = <0x1e000000 0x1000>;
#clock-cells = <1>;
};
ethernet: ethernet@1e100000 {
compatible = "mediatek,mt7621-eth";
reg = <0x1e100000 0x10000>;
clocks = <&sysclock>;
clock-names = "ethif";
#address-cells = <1>;
#size-cells = <0>;
resets = <&rstctrl 6 &rstctrl 23>;
reset-names = "fe", "eth";
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
mediatek,ethsys = <&ethsys>;
mediatek,switch = <&gsw>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
phy1f: ethernet-phy@1f {
reg = <0x1f>;
phy-mode = "rgmii";
};
};
};
gsw: gsw@1e110000 {
compatible = "mediatek,mt7621-gsw";
reg = <0x1e110000 0x8000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
};
pcie: pcie@1e140000 {
compatible = "mediatek,mt7621-pci";
reg = <0x1e140000 0x100
0x1e142000 0x100>;
#address-cells = <3>;
#size-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
device_type = "pci";
bus-range = <0 255>;
ranges = <
0x02000000 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */
0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH
GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
reset-names = "pcie0", "pcie1", "pcie2";
clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
clock-names = "pcie0", "pcie1", "pcie2";
pcie0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
};
pcie1 {
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
};
pcie2 {
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
};
};
};