Merge 4.20-rc5 into staging-next

We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 07:55:28 +01:00 · 2018-12-03 07:55:28 +01:00 · d5d12ce229
--- a/.mailmap
+++ b/.mailmap
@ -159,6 +159,7 @@ Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
+Punit Agrawal <punitagrawal@gmail.com> <punit.agrawal@arm.com>
 Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
 Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>
 Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>
--- a/8
+++ b/8
@ -2138,6 +2138,10 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA

+N: Jarkko Lavinen
+E: jarkko.lavinen@nokia.com
+D: OMAP MMC support
+
 N: Jonathan Layes
 D: ARPD support

@ -2200,6 +2204,10 @@ S: Post Office Box 371
 S: North Little Rock, Arkansas 72115
 S: USA

+N: Christopher Li
+E: sparse@chrisli.org
+D: Sparse maintainer 2009 - 2018
+
 N: Stephan Linz
 E: linz@mazet.de
 E: Stephan.Linz@gmx.de
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
@ -37,8 +37,8 @@ Description:
 		  0-|   /             \/             \/
 		    +---0----1----2----3----4----5----6------------> time (s)

-		2. To make the LED go instantly from one brigntess value to another,
-		we should use use zero-time lengths (the brightness must be same as
+		2. To make the LED go instantly from one brightness value to another,
+		we should use zero-time lengths (the brightness must be same as
 		the previous tuple's). So the format should be:
 		"brightness_1 duration_1 brightness_1 0 brightness_2 duration_2
 		brightness_2 0 ...". For example:
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -856,7 +856,8 @@
 			causing system reset or hang due to sending
 			INIT from AP to BSP.

-	disable_counter_freezing [HW]
+	perf_v4_pmi=	[X86,INTEL]
+			Format: <bool>
 			Disable Intel PMU counter freezing feature.
 			The feature only exists starting from
 			Arch Perfmon v4 (Skylake and newer).
@ -3504,6 +3505,10 @@
 			before loading.
 			See Documentation/blockdev/ramdisk.txt.

+	psi=		[KNL] Enable or disable pressure stall information
+			tracking.
+			Format: <bool>
+
 	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
 			probe for; one of (bare|imps|exps|lifebook|any).
 	psmouse.rate=	[HW,MOUSE] Set desired mouse report rate, in reports
@ -4194,9 +4199,13 @@

 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
+			The default operation protects the kernel from
+			user space attacks.

-			on   - unconditionally enable
-			off  - unconditionally disable
+			on   - unconditionally enable, implies
+			       spectre_v2_user=on
+			off  - unconditionally disable, implies
+			       spectre_v2_user=off
 			auto - kernel detects whether your CPU model is
 			       vulnerable

@ -4206,6 +4215,12 @@
 			CONFIG_RETPOLINE configuration option, and the
 			compiler with which the kernel was built.

+			Selecting 'on' will also enable the mitigation
+			against user space to user space task attacks.
+
+			Selecting 'off' will disable both the kernel and
+			the user space protections.
+
 			Specific mitigations can also be selected manually:

 			retpoline	  - replace indirect branches
@ -4215,6 +4230,48 @@
 			Not specifying this option is equivalent to
 			spectre_v2=auto.

+	spectre_v2_user=
+			[X86] Control mitigation of Spectre variant 2
+		        (indirect branch speculation) vulnerability between
+		        user space tasks
+
+			on	- Unconditionally enable mitigations. Is
+				  enforced by spectre_v2=on
+
+			off     - Unconditionally disable mitigations. Is
+				  enforced by spectre_v2=off
+
+			prctl   - Indirect branch speculation is enabled,
+				  but mitigation can be enabled via prctl
+				  per thread.  The mitigation control state
+				  is inherited on fork.
+
+			prctl,ibpb
+				- Like "prctl" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different user
+				  space processes.
+
+			seccomp
+				- Same as "prctl" above, but all seccomp
+				  threads will enable the mitigation unless
+				  they explicitly opt out.
+
+			seccomp,ibpb
+				- Like "seccomp" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different
+				  user space processes.
+
+			auto    - Kernel selects the mitigation depending on
+				  the available CPU features and vulnerability.
+
+			Default mitigation:
+			If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+			Not specifying this option is equivalent to
+			spectre_v2_user=auto.
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
@ -4713,6 +4770,8 @@
 					prevent spurious wakeup);
 				n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
 					pause after every control message);
+				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
+					delay after resetting its port);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij

 	usbhid.mousepoll=
--- a/Documentation/admin-guide/pm/cpufreq.rst
+++ b/Documentation/admin-guide/pm/cpufreq.rst
@ -150,7 +150,7 @@ data structures necessary to handle the given policy and, possibly, to add
 a governor ``sysfs`` interface to it.  Next, the governor is started by
 invoking its ``->start()`` callback.

-That callback it expected to register per-CPU utilization update callbacks for
+That callback is expected to register per-CPU utilization update callbacks for
 all of the online CPUs belonging to the given policy with the CPU scheduler.
 The utilization update callbacks will be invoked by the CPU scheduler on
 important events, like task enqueue and dequeue, on every iteration of the
--- a/Documentation/admin-guide/security-bugs.rst
+++ b/Documentation/admin-guide/security-bugs.rst
@ -32,16 +32,17 @@ Disclosure and embargoed information
 The security list is not a disclosure channel.  For that, see Coordination
 below.

-Once a robust fix has been developed, our preference is to release the
-fix in a timely fashion, treating it no differently than any of the other
-thousands of changes and fixes the Linux kernel project releases every
-month.
+Once a robust fix has been developed, the release process starts.  Fixes
+for publicly known bugs are released immediately.

-However, at the request of the reporter, we will postpone releasing the
-fix for up to 5 business days after the date of the report or after the
-embargo has lifted; whichever comes first.  The only exception to that
-rule is if the bug is publicly known, in which case the preference is to
-release the fix as soon as it's available.
+Although our preference is to release fixes for publicly undisclosed bugs
+as soon as they become available, this may be postponed at the request of
+the reporter or an affected party for up to 7 calendar days from the start
+of the release process, with an exceptional extension to 14 calendar days
+if it is agreed that the criticality of the bug requires more time.  The
+only valid reason for deferring the publication of a fix is to accommodate
+the logistics of QA and large scale rollouts which require release
+coordination.

 Whilst embargoed information may be shared with trusted individuals in
 order to develop a fix, such information will not be published alongside
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@ -57,6 +57,7 @@ stable kernels.
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 | ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
 | ARM            | Cortex-A76      | #1188873        | ARM64_ERRATUM_1188873       |
+| ARM            | Cortex-A76      | #1286807        | ARM64_ERRATUM_1286807       |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |
--- a/Documentation/core-api/xarray.rst
+++ b/Documentation/core-api/xarray.rst
@ -74,7 +74,8 @@ using :c:func:`xa_load`.  xa_store will overwrite any entry with the
 new entry and return the previous entry stored at that index.  You can
 use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a
 ``NULL`` entry.  There is no difference between an entry that has never
-been stored to and one that has most recently had ``NULL`` stored to it.
+been stored to, one that has been erased and one that has most recently
+had ``NULL`` stored to it.

 You can conditionally replace an entry at an index by using
 :c:func:`xa_cmpxchg`.  Like :c:func:`cmpxchg`, it will only succeed if
@ -105,23 +106,44 @@ may result in the entry being marked at some, but not all of the other
 indices.  Storing into one index may result in the entry retrieved by
 some, but not all of the other indices changing.

+Sometimes you need to ensure that a subsequent call to :c:func:`xa_store`
+will not need to allocate memory.  The :c:func:`xa_reserve` function
+will store a reserved entry at the indicated index.  Users of the normal
+API will see this entry as containing ``NULL``.  If you do not need to
+use the reserved entry, you can call :c:func:`xa_release` to remove the
+unused entry.  If another user has stored to the entry in the meantime,
+:c:func:`xa_release` will do nothing; if instead you want the entry to
+become ``NULL``, you should use :c:func:`xa_erase`.
+
+If all entries in the array are ``NULL``, the :c:func:`xa_empty` function
+will return ``true``.
+
 Finally, you can remove all entries from an XArray by calling
 :c:func:`xa_destroy`.  If the XArray entries are pointers, you may wish
 to free the entries first.  You can do this by iterating over all present
 entries in the XArray using the :c:func:`xa_for_each` iterator.

-ID assignment
-------------
+Allocating XArrays
+------------------
+
+If you use :c:func:`DEFINE_XARRAY_ALLOC` to define the XArray, or
+initialise it by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
+the XArray changes to track whether entries are in use or not.

 You can call :c:func:`xa_alloc` to store the entry at any unused index
 in the XArray.  If you need to modify the array from interrupt context,
 you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable
-interrupts while allocating the ID.  Unlike :c:func:`xa_store`, allocating
-a ``NULL`` pointer does not delete an entry.  Instead it reserves an
-entry like :c:func:`xa_reserve` and you can release it using either
-:c:func:`xa_erase` or :c:func:`xa_release`.  To use ID assignment, the
-XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised
-by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
+interrupts while allocating the ID.
+
+Using :c:func:`xa_store`, :c:func:`xa_cmpxchg` or :c:func:`xa_insert`
+will mark the entry as being allocated.  Unlike a normal XArray, storing
+``NULL`` will mark the entry as being in use, like :c:func:`xa_reserve`.
+To free an entry, use :c:func:`xa_erase` (or :c:func:`xa_release` if
+you only want to free the entry if it's ``NULL``).
+
+You cannot use ``XA_MARK_0`` with an allocating XArray as this mark
+is used to track whether an entry is free or not.  The other marks are
+available for your use.

 Memory allocation
 -----------------
@ -158,6 +180,8 @@ Takes RCU read lock:

 Takes xa_lock internally:
 * :c:func:`xa_store`
+ * :c:func:`xa_store_bh`
+ * :c:func:`xa_store_irq`
 * :c:func:`xa_insert`
 * :c:func:`xa_erase`
 * :c:func:`xa_erase_bh`
@ -167,6 +191,9 @@ Takes xa_lock internally:
 * :c:func:`xa_alloc`
 * :c:func:`xa_alloc_bh`
 * :c:func:`xa_alloc_irq`
+ * :c:func:`xa_reserve`
+ * :c:func:`xa_reserve_bh`
+ * :c:func:`xa_reserve_irq`
 * :c:func:`xa_destroy`
 * :c:func:`xa_set_mark`
 * :c:func:`xa_clear_mark`
@ -177,6 +204,7 @@ Assumes xa_lock held on entry:
 * :c:func:`__xa_erase`
 * :c:func:`__xa_cmpxchg`
 * :c:func:`__xa_alloc`
+ * :c:func:`__xa_reserve`
 * :c:func:`__xa_set_mark`
 * :c:func:`__xa_clear_mark`

@ -234,7 +262,8 @@ Sharing the XArray with interrupt context is also possible, either
 using :c:func:`xa_lock_irqsave` in both the interrupt handler and process
 context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock`
 in the interrupt handler.  Some of the more common patterns have helper
-functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`.
+functions such as :c:func:`xa_store_bh`, :c:func:`xa_store_irq`,
+:c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`.

 Sometimes you need to protect access to the XArray with a mutex because
 that lock sits above another mutex in the locking hierarchy.  That does
@ -322,7 +351,8 @@ to :c:func:`xas_retry`, and retry the operation if it returns ``true``.
     - :c:func:`xa_is_zero`
     - Zero entries appear as ``NULL`` through the Normal API, but occupy
       an entry in the XArray which can be used to reserve the index for
-       future use.
+       future use.  This is used by allocating XArrays for allocated entries
+       which are ``NULL``.

 Other internal entries may be added in the future.  As far as possible, they
 will be handled by :c:func:`xas_retry`.
--- a/Documentation/cpu-freq/cpufreq-stats.txt
+++ b/Documentation/cpu-freq/cpufreq-stats.txt
@ -86,9 +86,11 @@ transitions.
 This will give a fine grained information about all the CPU frequency
 transitions. The cat output here is a two dimensional matrix, where an entry
 <i,j> (row i, column j) represents the count of number of transitions from 
-Freq_i to Freq_j. Freq_i is in descending order with increasing rows and 
-Freq_j is in descending order with increasing columns. The output here also 
-contains the actual freq values for each row and column for better readability.
+Freq_i to Freq_j. Freq_i rows and Freq_j columns follow the sorting order in
+which the driver has provided the frequency table initially to the cpufreq core
+and so can be sorted (ascending or descending) or unsorted.  The output here
+also contains the actual freq values for each row and column for better
+readability.

 If the transition table is bigger than PAGE_SIZE, reading this will
 return an -EFBIG error.
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@ -27,7 +27,7 @@ SoCs:
    compatible = "renesas,r8a77470"
  - RZ/G2M (R8A774A1)
    compatible = "renesas,r8a774a1"
-  - RZ/G2E (RA8774C0)
+  - RZ/G2E (R8A774C0)
    compatible = "renesas,r8a774c0"
  - R-Car M1A (R8A77781)
    compatible = "renesas,r8a7778"
--- a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
+++ b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
@ -1,65 +0,0 @@
-Generic ARM big LITTLE cpufreq driver's DT glue
-----------------------------------------------
-
-This is DT specific glue layer for generic cpufreq driver for big LITTLE
-systems.
-
-Both required and optional properties listed below must be defined
-under node /cpus/cpu@x. Where x is the first cpu inside a cluster.
-
-FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster
-must be present contiguously. Generic DT driver will check only node 'x' for
-cpu:x.
-
-Required properties:
- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt
-  for details
-
-Optional properties:
- clock-latency: Specify the possible maximum transition latency for clock,
-  in unit of nanoseconds.
-
-Examples:
-
-cpus {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	cpu@0 {
-		compatible = "arm,cortex-a15";
-		reg = <0>;
-		next-level-cache = <&L2>;
-		operating-points = <
-			/* kHz    uV */
-			792000  1100000
-			396000  950000
-			198000  850000
-		>;
-		clock-latency = <61036>; /* two CLK32 periods */
-	};
-
-	cpu@1 {
-		compatible = "arm,cortex-a15";
-		reg = <1>;
-		next-level-cache = <&L2>;
-	};
-
-	cpu@100 {
-		compatible = "arm,cortex-a7";
-		reg = <100>;
-		next-level-cache = <&L2>;
-		operating-points = <
-			/* kHz    uV */
-			792000  950000
-			396000  750000
-			198000  450000
-		>;
-		clock-latency = <61036>; /* two CLK32 periods */
-	};
-
-	cpu@101 {
-		compatible = "arm,cortex-a7";
-		reg = <101>;
-		next-level-cache = <&L2>;
-	};
-};
--- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
@ -1,8 +1,12 @@
 I2C for OMAP platforms

 Required properties :
- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
-  or "ti,omap4-i2c"
+- compatible : Must be
+	"ti,omap2420-i2c" for OMAP2420 SoCs
+	"ti,omap2430-i2c" for OMAP2430 SoCs
+	"ti,omap3-i2c" for OMAP3 SoCs
+	"ti,omap4-i2c" for OMAP4+ SoCs
+	"ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs
 - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
 - #address-cells = <1>;
 - #size-cells = <0>;
--- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
+++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
@ -17,7 +17,7 @@ Example:
 		reg = <1>;
 		clocks = <&clk32m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
 	};
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@ -5,6 +5,7 @@ Required properties:
 - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
 	      "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
+	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@ -14,26 +15,32 @@ Required properties:
 	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
 	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
 	      "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
+	      "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
 	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
 	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
 	      compatible device.
-	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
+	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
+	      compatible device.
 	      When compatible with the generic version, nodes must list the
 	      SoC-specific version corresponding to the platform first
 	      followed by the generic version.

 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
- clocks: phandles and clock specifiers for 3 CAN clock inputs.
- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
+	  devices.
+	  phandles and clock specifiers for 3 CAN clock inputs for every other
+	  SoC.
+- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
+	       3 clock input name strings for every other SoC: "clkp1", "clkp2",
+	       "can_clk".
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".

-Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
-compatible:
-In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
-and can be used by both CAN and CAN FD controller at the same time. It needs to
-be scaled to maximum frequency if any of these controllers use it. This is done
+Required properties for R8A7795, R8A7796 and R8A77965:
+For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
+be used by both CAN and CAN FD controller at the same time. It needs to be
+scaled to maximum frequency if any of these controllers use it. This is done
 using the below properties:

 - assigned-clocks: phandle of clkp2(CANFD) clock.
@ -42,8 +49,9 @@ using the below properties:
 Optional properties:
 - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
 			    <0x0> (default) : Peripheral clock (clkp1)
-			    <0x1> : Peripheral clock (clkp2)
-			    <0x3> : Externally input clock
+			    <0x1> : Peripheral clock (clkp2) (not supported by
+				    RZ/G2 devices)
+			    <0x3> : External input clock

 Example
 -------
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@ -7,7 +7,7 @@ limitations.
 Current Binding
 ---------------

-Switches are true Linux devices and can be probes by any means. Once
+Switches are true Linux devices and can be probed by any means. Once
 probed, they register to the DSA framework, passing a node
 pointer. This node is expected to fulfil the following binding, and
 may contain additional properties as required by the device it is
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@ -40,24 +40,36 @@ Required properties:
 		"ref" for 19.2 MHz ref clk,
 		"com_aux" for phy common block aux clock,
 		"ref_aux" for phy reference aux clock,
+
+		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
-		For "qcom,qmp-v3-usb3-phy" must contain:
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".

 - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
 - reset-names: "phy" for reset of phy block,
 		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset (Optional).
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-		 "phy", "common", "cfg".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-		 "phy", "common".
+		"cfg" for phy's ahb cfg block reset.
+
 		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-		 "phy", "common".
+			"phy", "common".
+		For "qcom,msm8996-qmp-pcie-phy" must contain:
+			"phy", "common", "cfg".
+		For "qcom,msm8996-qmp-usb3-phy" must contain
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-ufs-phy": no resets are listed.

 - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
 - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@ -79,9 +91,10 @@ Required properties for child node:

 - #phy-cells: must be 0

+Required properties child node of pcie and usb3 qmp phys:
 - clocks: a list of phandles and clock-specifier pairs,
 	   one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
+ - clock-names: Must contain following:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
 - clock-output-names: Name of the PHY clock that will be the parent for
 		       the above pipe clock.
@ -91,9 +104,11 @@ Required properties for child node:
 			(or)
 		  "pcie20_phy1_pipe_clk"

+Required properties for child node of PHYs with lane reset, AKA:
+	"qcom,msm8996-qmp-pcie-phy"
 - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
+ - reset-names: Must contain following:
 		 "lane<lane-number>" for reset specific to each lane.

 Example:
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
 - compatible: should be "socionext,uniphier-scssi"
 - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - clocks: A phandle to the clock for the device.
- - resets: A phandle to the reset control for the device.
+ - interrupts: a single interrupt specifier
+ - pinctrl-names: should be "default"
+ - pinctrl-0: pin control state for the default mode
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device

 Example:

 spi0: spi@54006000 {
 	compatible = "socionext,uniphier-scssi";
 	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
+	interrupts = <0 39 4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
 	clocks = <&peri_clk 11>;
 	resets = <&peri_rst 11>;
 };
--- a/Documentation/i2c/busses/i2c-nvidia-gpu
+++ b/Documentation/i2c/busses/i2c-nvidia-gpu
@ -0,0 +1,18 @@
+Kernel driver i2c-nvidia-gpu
+
+Datasheet: not publicly available.
+
+Authors:
+	Ajay Gupta <ajayg@nvidia.com>
+
+Description
+-----------
+
+i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing
+and later GPUs and it is used to communicate with Type-C controller on GPUs.
+
+If your 'lspci -v' listing shows something like the following,
+
+01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1)
+
+then this driver should support the I2C controller of your GPU.
--- a/Documentation/input/event-codes.rst
+++ b/Documentation/input/event-codes.rst
@ -190,16 +190,7 @@ A few EV_REL codes have special meanings:
 * REL_WHEEL, REL_HWHEEL:

  - These codes are used for vertical and horizontal scroll wheels,
-    respectively. The value is the number of "notches" moved on the wheel, the
-    physical size of which varies by device. For high-resolution wheels (which
-    report multiple events for each notch of movement, or do not have notches)
-    this may be an approximation based on the high-resolution scroll events.
-
-* REL_WHEEL_HI_RES:
-
-  - If a vertical scroll wheel supports high-resolution scrolling, this code
-    will be emitted in addition to REL_WHEEL. The value is the (approximate)
-    distance travelled by the user's finger, in microns.
+    respectively.

 EV_ABS
 ------
--- a/Documentation/media/uapi/v4l/dev-meta.rst
+++ b/Documentation/media/uapi/v4l/dev-meta.rst
@ -40,7 +40,7 @@ To use the :ref:`format` ioctls applications set the ``type`` field of the
 the desired operation. Both drivers and applications must set the remainder of
 the :c:type:`v4l2_format` structure to 0.

-.. _v4l2-meta-format:
+.. c:type:: v4l2_meta_format

 .. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}|

--- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
@ -132,6 +132,11 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical
      - ``sdr``
      - Definition of a data format, see :ref:`pixfmt`, used by SDR
 	capture and output devices.
+    * -
+      - struct :c:type:`v4l2_meta_format`
+      - ``meta``
+      - Definition of a metadata format, see :ref:`meta-formats`, used by
+	metadata capture devices.
    * -
      - __u8
      - ``raw_data``\ [200]
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@ -1056,18 +1056,23 @@ The kernel interface functions are as follows:

 	u32 rxrpc_kernel_check_life(struct socket *sock,
 				    struct rxrpc_call *call);
+	void rxrpc_kernel_probe_life(struct socket *sock,
+				     struct rxrpc_call *call);

-     This returns a number that is updated when ACKs are received from the peer
-     (notably including PING RESPONSE ACKs which we can elicit by sending PING
-     ACKs to see if the call still exists on the server).  The caller should
-     compare the numbers of two calls to see if the call is still alive after
-     waiting for a suitable interval.
+     The first function returns a number that is updated when ACKs are received
+     from the peer (notably including PING RESPONSE ACKs which we can elicit by
+     sending PING ACKs to see if the call still exists on the server).  The
+     caller should compare the numbers of two calls to see if the call is still
+     alive after waiting for a suitable interval.

     This allows the caller to work out if the server is still contactable and
     if the call is still alive on the server whilst waiting for the server to
     process a client operation.

-     This function may transmit a PING ACK.
+     The second function causes a ping ACK to be transmitted to try to provoke
+     the peer into responding, which would then cause the value returned by the
+     first function to change.  Note that this must be called in TASK_RUNNING
+     state.

 (*) Get reply timestamp.

--- a/Documentation/userspace-api/spec_ctrl.rst
+++ b/Documentation/userspace-api/spec_ctrl.rst
@ -92,3 +92,12 @@ Speculation misfeature controls
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
+
+- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes
+                        (Mitigate Spectre V2 style attacks against user processes)
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@ -61,18 +61,6 @@ Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
 	 	to struct boot_params for loading bzImage and ramdisk
 		above 4G in 64bit.

-Protocol 2.13:	(Kernel 3.14) Support 32- and 64-bit flags being set in
-		xloadflags to support booting a 64-bit kernel from 32-bit
-		EFI
-
-Protocol 2.14:	(Kernel 4.20) Added acpi_rsdp_addr holding the physical
-		address of the ACPI RSDP table.
-		The bootloader updates version with:
-		0x8000 | min(kernel-version, bootloader-version)
-		kernel-version being the protocol version supported by
-		the kernel and bootloader-version the protocol version
-		supported by the bootloader.
-
 **** MEMORY LAYOUT

 The traditional memory map for the kernel loader, used for Image or
@ -209,7 +197,6 @@ Offset	Proto	Name		Meaning
 0258/8	2.10+	pref_address	Preferred loading address
 0260/4	2.10+	init_size	Linear memory required during initialization
 0264/4	2.11+	handover_offset	Offset of handover entry point
-0268/8	2.14+	acpi_rsdp_addr	Physical address of RSDP table

 (1) For backwards compatibility, if the setup_sects field contains 0, the
    real value is 4.
@ -322,7 +309,7 @@ Protocol:	2.00+
  Contains the magic number "HdrS" (0x53726448).

 Field name:	version
-Type:		modify
+Type:		read
 Offset/size:	0x206/2
 Protocol:	2.00+

@ -330,12 +317,6 @@ Protocol:	2.00+
  e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
  10.17.

-  Up to protocol version 2.13 this information is only read by the
-  bootloader. From protocol version 2.14 onwards the bootloader will
-  write the used protocol version or-ed with 0x8000 to the field. The
-  used protocol version will be the minimum of the supported protocol
-  versions of the bootloader and the kernel.
-
 Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
@ -763,17 +744,6 @@ Offset/size:	0x264/4

  See EFI HANDOVER PROTOCOL below for more details.

-Field name:	acpi_rsdp_addr
-Type:		write
-Offset/size:	0x268/8
-Protocol:	2.14+
-
-  This field can be set by the boot loader to tell the kernel the
-  physical address of the ACPI RSDP table.
-
-  A value of 0 indicates the kernel should fall back to the standard
-  methods to locate the RSDP.
-

 **** THE IMAGE CHECKSUM

--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@ -34,23 +34,24 @@ __________________|____________|__________________|_________|___________________
 ____________________________________________________________|___________________________________________________________
                  |            |                  |         |
 ffff800000000000 | -128    TB | ffff87ffffffffff |    8 TB | ... guard hole, also reserved for hypervisor
- ffff880000000000 | -120    TB | ffffc7ffffffffff |   64 TB | direct mapping of all physical memory (page_offset_base)
- ffffc80000000000 |  -56    TB | ffffc8ffffffffff |    1 TB | ... unused hole
+ ffff880000000000 | -120    TB | ffff887fffffffff |  0.5 TB | LDT remap for PTI
+ ffff888000000000 | -119.5  TB | ffffc87fffffffff |   64 TB | direct mapping of all physical memory (page_offset_base)
+ ffffc88000000000 |  -55.5  TB | ffffc8ffffffffff |  0.5 TB | ... unused hole
 ffffc90000000000 |  -55    TB | ffffe8ffffffffff |   32 TB | vmalloc/ioremap space (vmalloc_base)
 ffffe90000000000 |  -23    TB | ffffe9ffffffffff |    1 TB | ... unused hole
 ffffea0000000000 |  -22    TB | ffffeaffffffffff |    1 TB | virtual memory map (vmemmap_base)
 ffffeb0000000000 |  -21    TB | ffffebffffffffff |    1 TB | ... unused hole
 ffffec0000000000 |  -20    TB | fffffbffffffffff |   16 TB | KASAN shadow memory
+__________________|____________|__________________|_________|____________________________________________________________
+                                                            |
+                                                            | Identical layout to the 56-bit one from here on:
+____________________________________________________________|____________________________________________________________
+                  |            |                  |         |
 fffffc0000000000 |   -4    TB | fffffdffffffffff |    2 TB | ... unused hole
                  |            |                  |         | vaddr_end for KASLR
 fffffe0000000000 |   -2    TB | fffffe7fffffffff |  0.5 TB | cpu_entry_area mapping
- fffffe8000000000 |   -1.5  TB | fffffeffffffffff |  0.5 TB | LDT remap for PTI
+ fffffe8000000000 |   -1.5  TB | fffffeffffffffff |  0.5 TB | ... unused hole
 ffffff0000000000 |   -1    TB | ffffff7fffffffff |  0.5 TB | %esp fixup stacks
-__________________|____________|__________________|_________|____________________________________________________________
-                                                            |
-                                                            | Identical layout to the 47-bit one from here on:
-____________________________________________________________|____________________________________________________________
-                  |            |                  |         |
 ffffff8000000000 | -512    GB | ffffffeeffffffff |  444 GB | ... unused hole
 ffffffef00000000 |  -68    GB | fffffffeffffffff |   64 GB | EFI region mapping space
 ffffffff00000000 |   -4    GB | ffffffff7fffffff |    2 GB | ... unused hole
@ -83,7 +84,7 @@ Notes:
 __________________|____________|__________________|_________|___________________________________________________________
                  |            |                  |         |
 0000800000000000 |  +64    PB | ffff7fffffffffff | ~16K PB | ... huge, still almost 64 bits wide hole of non-canonical
-                  |            |                  |         |     virtual memory addresses up to the -128 TB
+                  |            |                  |         |     virtual memory addresses up to the -64 PB
                  |            |                  |         |     starting offset of kernel mappings.
 __________________|____________|__________________|_________|___________________________________________________________
                                                            |
@ -91,23 +92,24 @@ __________________|____________|__________________|_________|___________________
 ____________________________________________________________|___________________________________________________________
                  |            |                  |         |
 ff00000000000000 |  -64    PB | ff0fffffffffffff |    4 PB | ... guard hole, also reserved for hypervisor
- ff10000000000000 |  -60    PB | ff8fffffffffffff |   32 PB | direct mapping of all physical memory (page_offset_base)
- ff90000000000000 |  -28    PB | ff9fffffffffffff |    4 PB | LDT remap for PTI
+ ff10000000000000 |  -60    PB | ff10ffffffffffff | 0.25 PB | LDT remap for PTI
+ ff11000000000000 |  -59.75 PB | ff90ffffffffffff |   32 PB | direct mapping of all physical memory (page_offset_base)
+ ff91000000000000 |  -27.75 PB | ff9fffffffffffff | 3.75 PB | ... unused hole
 ffa0000000000000 |  -24    PB | ffd1ffffffffffff | 12.5 PB | vmalloc/ioremap space (vmalloc_base)
 ffd2000000000000 |  -11.5  PB | ffd3ffffffffffff |  0.5 PB | ... unused hole
 ffd4000000000000 |  -11    PB | ffd5ffffffffffff |  0.5 PB | virtual memory map (vmemmap_base)
 ffd6000000000000 |  -10.5  PB | ffdeffffffffffff | 2.25 PB | ... unused hole
 ffdf000000000000 |   -8.25 PB | fffffdffffffffff |   ~8 PB | KASAN shadow memory
- fffffc0000000000 |   -4    TB | fffffdffffffffff |    2 TB | ... unused hole
-                  |            |                  |         | vaddr_end for KASLR
- fffffe0000000000 |   -2    TB | fffffe7fffffffff |  0.5 TB | cpu_entry_area mapping
- fffffe8000000000 |   -1.5  TB | fffffeffffffffff |  0.5 TB | ... unused hole
- ffffff0000000000 |   -1    TB | ffffff7fffffffff |  0.5 TB | %esp fixup stacks
 __________________|____________|__________________|_________|____________________________________________________________
                                                            |
                                                            | Identical layout to the 47-bit one from here on:
 ____________________________________________________________|____________________________________________________________
                  |            |                  |         |
+ fffffc0000000000 |   -4    TB | fffffdffffffffff |    2 TB | ... unused hole
+                  |            |                  |         | vaddr_end for KASLR
+ fffffe0000000000 |   -2    TB | fffffe7fffffffff |  0.5 TB | cpu_entry_area mapping
+ fffffe8000000000 |   -1.5  TB | fffffeffffffffff |  0.5 TB | ... unused hole
+ ffffff0000000000 |   -1    TB | ffffff7fffffffff |  0.5 TB | %esp fixup stacks
 ffffff8000000000 | -512    GB | ffffffeeffffffff |  444 GB | ... unused hole
 ffffffef00000000 |  -68    GB | fffffffeffffffff |   64 GB | EFI region mapping space
 ffffffff00000000 |   -4    GB | ffffffff7fffffff |    2 GB | ... unused hole
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@ -25,7 +25,7 @@ Offset	Proto	Name		Meaning
 0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
-1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
+1E0/004	ALL	alt_mem_k	Alternative mem check, in KB
 1E4/004	ALL	scratch		Scratch field for the kernel setup code
 1E8/001	ALL	e820_entries	Number of entries in e820_table (below)
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
--- a/208
+++ b/208
@ -180,6 +180,7 @@ F:	drivers/net/hamradio/6pack.c

 8169 10/100/1000 GIGABIT ETHERNET DRIVER
 M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
+M:	Heiner Kallweit <hkallweit1@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c
@ -717,7 +718,7 @@ F:	include/linux/mfd/altera-a10sr.h
 F:	include/dt-bindings/reset/altr,rst-mgr-a10sr.h

 ALTERA TRIPLE SPEED ETHERNET DRIVER
-M:	Vince Bridgers <vbridger@opensource.altera.com>
+M:	Thor Thayer <thor.thayer@linux.intel.com>
 L:	netdev@vger.kernel.org
 L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
@ -1930,7 +1931,6 @@ ARM/QUALCOMM SUPPORT
 M:	Andy Gross <andy.gross@linaro.org>
 M:	David Brown <david.brown@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
-L:	linux-soc@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom-*.dts
@ -2498,7 +2498,7 @@ F:	drivers/net/wireless/ath/*
 ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
-M:	"Luis R. Rodriguez" <mcgrof@do-not-panic.com>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
@ -2808,7 +2808,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
 Q:	https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
 S:	Supported
-F:	arch/x86/net/bpf_jit*
+F:	arch/*/net/*
 F:	Documentation/networking/filter.txt
 F:	Documentation/bpf/
 F:	include/linux/bpf*
@ -2828,6 +2828,67 @@ F:	tools/bpf/
 F:	tools/lib/bpf/
 F:	tools/testing/selftests/bpf/

+BPF JIT for ARM
+M:	Shubham Bansal <illusionist.neo@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/arm/net/
+
+BPF JIT for ARM64
+M:	Daniel Borkmann <daniel@iogearbox.net>
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Zi Shen Lim <zlim.lnx@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	arch/arm64/net/
+
+BPF JIT for MIPS (32-BIT AND 64-BIT)
+M:	Paul Burton <paul.burton@mips.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/mips/net/
+
+BPF JIT for NFP NICs
+M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/ethernet/netronome/nfp/bpf/
+
+BPF JIT for POWERPC (32-BIT AND 64-BIT)
+M:	Naveen N. Rao <naveen.n.rao@linux.ibm.com>
+M:	Sandipan Das <sandipan@linux.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/powerpc/net/
+
+BPF JIT for S390
+M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
+M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/s390/net/
+X:	arch/s390/net/pnet.c
+
+BPF JIT for SPARC (32-BIT AND 64-BIT)
+M:	David S. Miller <davem@davemloft.net>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/sparc/net/
+
+BPF JIT for X86 32-BIT
+M:	Wang YanQing <udknight@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/x86/net/bpf_jit_comp32.c
+
+BPF JIT for X86 64-BIT
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Daniel Borkmann <daniel@iogearbox.net>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	arch/x86/net/
+X:	arch/x86/net/bpf_jit_comp32.c
+
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Michael Chan <michael.chan@broadcom.com>
 L:	netdev@vger.kernel.org
@ -2868,7 +2929,7 @@ F:	drivers/staging/vc04_services
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/mips/brcm/
 F:	arch/mips/bcm47xx/*
@ -2877,7 +2938,6 @@ F:	arch/mips/include/asm/mach-bcm47xx/*
 BROADCOM BCM5301X ARM ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
@ -2932,7 +2992,7 @@ F:	drivers/cpufreq/bmips-cpufreq.c
 BROADCOM BMIPS MIPS ARCHITECTURE
 M:	Kevin Cernekee <cernekee@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
 F:	arch/mips/bmips/*
@ -3023,7 +3083,6 @@ F:	drivers/net/ethernet/broadcom/genet/
 BROADCOM IPROC ARM ARCHITECTURE
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/broadcom/cygnus-linux.git
@ -3070,7 +3129,7 @@ F:	include/uapi/rdma/bnxt_re-abi.h

 BROADCOM NVRAM DRIVER
 M:	Rafał Miłecki <zajec5@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/firmware/broadcom/*

@ -3284,6 +3343,12 @@ F:	include/uapi/linux/caif/
 F:	include/net/caif/
 F:	net/caif/

+CAKE QDISC
+M:	Toke Høiland-Jørgensen <toke@toke.dk>
+L:	cake@lists.bufferbloat.net (moderated for non-subscribers)
+S:	Maintained
+F:	net/sched/sch_cake.c
+
 CALGARY x86-64 IOMMU
 M:	Muli Ben-Yehuda <mulix@mulix.org>
 M:	Jon Mason <jdmason@kudzu.us>
@ -4166,7 +4231,7 @@ F:	net/decnet/

 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/wiki/DECstation
 S:	Maintained
 F:	arch/mips/dec/
@ -5257,7 +5322,7 @@ EDAC-CAVIUM OCTEON
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	David Daney <david.daney@cavium.com>
 L:	linux-edac@vger.kernel.org
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	drivers/edac/octeon_edac*

@ -5536,6 +5601,7 @@ F:	net/bridge/
 ETHERNET PHY LIBRARY
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Heiner Kallweit <hkallweit1@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-mdio
@ -5774,7 +5840,7 @@ F:	include/uapi/linux/firewire*.h
 F:	tools/firewire/

 FIRMWARE LOADER (request_firmware)
-M:	Luis R. Rodriguez <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware_class/
@ -6307,6 +6373,7 @@ F:	tools/testing/selftests/gpio/

 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
+M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 L:	linux-gpio@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
 S:	Maintained
@ -6615,9 +6682,9 @@ F:	arch/*/include/asm/suspend*.h

 HID CORE LAYER
 M:	Jiri Kosina <jikos@kernel.org>
-R:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
+M:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
 L:	linux-input@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 S:	Maintained
 F:	drivers/hid/
 F:	include/linux/hid*
@ -6869,6 +6936,13 @@ L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-core-acpi.c

+I2C CONTROLLER DRIVER FOR NVIDIA GPU
+M:	Ajay Gupta <ajayg@nvidia.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-nvidia-gpu
+F:	drivers/i2c/busses/i2c-nvidia-gpu.c
+
 I2C MUXES
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-i2c@vger.kernel.org
@ -7437,6 +7511,20 @@ S:	Maintained
 F:	Documentation/fb/intelfb.txt
 F:	drivers/video/fbdev/intelfb/

+INTEL GPIO DRIVERS
+M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
+F:	drivers/gpio/gpio-ich.c
+F:	drivers/gpio/gpio-intel-mid.c
+F:	drivers/gpio/gpio-lynxpoint.c
+F:	drivers/gpio/gpio-merrifield.c
+F:	drivers/gpio/gpio-ml-ioh.c
+F:	drivers/gpio/gpio-pch.c
+F:	drivers/gpio/gpio-sch.c
+F:	drivers/gpio/gpio-sodaville.c
+
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
 M:	Zhenyu Wang <zhenyuw@linux.intel.com>
 M:	Zhi Wang <zhi.a.wang@intel.com>
@ -7447,12 +7535,6 @@ T:	git https://github.com/intel/gvt-linux.git
 S:	Supported
 F:	drivers/gpu/drm/i915/gvt/

-INTEL PMIC GPIO DRIVER
-R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-S:	Maintained
-F:	drivers/gpio/gpio-*cove.c
-F:	drivers/gpio/gpio-msic.c
-
 INTEL HID EVENT DRIVER
 M:	Alex Hung <alex.hung@canonical.com>
 L:	platform-driver-x86@vger.kernel.org
@ -7540,12 +7622,6 @@ W:	https://01.org/linux-acpi
 S:	Supported
 F:	drivers/platform/x86/intel_menlow.c

-INTEL MERRIFIELD GPIO DRIVER
-M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-L:	linux-gpio@vger.kernel.org
-S:	Maintained
-F:	drivers/gpio/gpio-merrifield.c
-
 INTEL MIC DRIVERS (mic)
 M:	Sudeep Dutt <sudeep.dutt@intel.com>
 M:	Ashutosh Dixit <ashutosh.dixit@intel.com>
@ -7578,6 +7654,13 @@ F:	drivers/platform/x86/intel_punit_ipc.c
 F:	arch/x86/include/asm/intel_pmc_ipc.h
 F:	arch/x86/include/asm/intel_punit_ipc.h

+INTEL PMIC GPIO DRIVERS
+M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
+F:	drivers/gpio/gpio-*cove.c
+F:	drivers/gpio/gpio-msic.c
+
 INTEL MULTIFUNCTION PMIC DEVICE DRIVERS
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
@ -7686,7 +7769,7 @@ F:	Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt

 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/sgi/ioc3-eth.c

@ -8057,7 +8140,7 @@ F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*

 KERNEL USERMODE HELPER
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/umh.c
@ -8114,7 +8197,7 @@ F:	arch/arm64/kvm/

 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
 M:	James Hogan <jhogan@kernel.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/include/asm/kvm*
@ -8233,7 +8316,7 @@ F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c

 KMOD KERNEL MODULE LOADER - USERMODE HELPER
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/kmod.c
@ -8287,7 +8370,7 @@ F:	drivers/net/dsa/lantiq_gswip.c

 LANTIQ MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/lantiq
 F:	drivers/soc/lantiq
@ -8375,7 +8458,7 @@ F:	drivers/media/dvb-frontends/lgdt3305.*
 LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
 M:	Viresh Kumar <vireshk@kernel.org>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
 F:	include/linux/pata_arasan_cf_data.h
 F:	drivers/ata/pata_arasan_cf.c
@ -8392,7 +8475,7 @@ F:	drivers/ata/ata_generic.c
 LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
 F:	drivers/ata/pata_ftide010.c
 F:	drivers/ata/sata_gemini.c
@ -8411,7 +8494,7 @@ F:	include/linux/ahci_platform.h
 LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
 M:	Mikael Pettersson <mikpelinux@gmail.com>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
 F:	drivers/ata/sata_promise.*

@ -8850,7 +8933,7 @@ S:	Maintained

 MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
 M:	Rahul Bedarkar <rahulbedarkar89@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/img/pistachio_marduk.dts

@ -9809,7 +9892,7 @@ F:	drivers/dma/at_xdmac.c

 MICROSEMI MIPS SOCS
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/generic/board-ocelot.c
 F:	arch/mips/configs/generic/board-ocelot.config
@ -9849,7 +9932,7 @@ MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	Paul Burton <paul.burton@mips.com>
 M:	James Hogan <jhogan@kernel.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/
 T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
@ -9862,7 +9945,7 @@ F:	drivers/platform/mips/

 MIPS BOSTON DEVELOPMENT BOARD
 M:	Paul Burton <paul.burton@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/img,boston-clock.txt
 F:	arch/mips/boot/dts/img/boston.dts
@ -9872,7 +9955,7 @@ F:	include/dt-bindings/clock/boston-clock.h

 MIPS GENERIC PLATFORM
 M:	Paul Burton <paul.burton@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 F:	arch/mips/generic/
@ -9880,7 +9963,7 @@ F:	arch/mips/tools/generic-board-config.sh

 MIPS/LOONGSON1 ARCHITECTURE
 M:	Keguang Zhang <keguang.zhang@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson32/
 F:	arch/mips/include/asm/mach-loongson32/
@ -9889,7 +9972,7 @@ F:	drivers/*/*/*loongson1*

 MIPS/LOONGSON2 ARCHITECTURE
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/fuloong-2e/
 F:	arch/mips/loongson64/lemote-2f/
@ -9899,7 +9982,7 @@ F:	drivers/*/*/*loongson2*

 MIPS/LOONGSON3 ARCHITECTURE
 M:	Huacai Chen <chenhc@lemote.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/
 F:	arch/mips/include/asm/mach-loongson64/
@ -9909,7 +9992,7 @@ F:	drivers/*/*/*loongson3*

 MIPS RINT INSTRUCTION EMULATION
 M:	Aleksandar Markovic <aleksandar.markovic@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/math-emu/sp_rint.c
 F:	arch/mips/math-emu/dp_rint.c
@ -10792,6 +10875,14 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod.*

+OMAP I2C DRIVER
+M:	Vignesh R <vigneshr@ti.com>
+L:	linux-omap@vger.kernel.org
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-omap.txt
+F:	drivers/i2c/busses/i2c-omap.c
+
 OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS)
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
@ -10801,9 +10892,9 @@ F:	drivers/media/platform/omap3isp/
 F:	drivers/staging/media/omap4iss/

 OMAP MMC SUPPORT
-M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
+M:	Aaro Koskinen <aaro.koskinen@iki.fi>
 L:	linux-omap@vger.kernel.org
-S:	Maintained
+S:	Odd Fixes
 F:	drivers/mmc/host/omap.c

 OMAP POWER MANAGEMENT SUPPORT
@ -10886,7 +10977,7 @@ F:	include/linux/platform_data/i2c-omap.h

 ONION OMEGA2+ BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ralink/omega2p.dts

@ -11738,6 +11829,7 @@ F:	Documentation/devicetree/bindings/pinctrl/fsl,*
 PIN CONTROLLER - INTEL
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
 S:	Maintained
 F:	drivers/pinctrl/intel/

@ -11794,7 +11886,7 @@ F:	drivers/pinctrl/spear/

 PISTACHIO SOC SUPPORT
 M:	James Hartley <james.hartley@sondrel.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Odd Fixes
 F:	arch/mips/pistachio/
 F:	arch/mips/include/asm/mach-pistachio/
@ -11981,7 +12073,7 @@ F:	kernel/printk/
 F:	include/linux/printk.h

 PRISM54 WIRELESS DRIVER
-M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
@ -11995,9 +12087,10 @@ S:	Maintained
 F:	fs/proc/
 F:	include/linux/proc_fs.h
 F:	tools/testing/selftests/proc/
+F:	Documentation/filesystems/proc.txt

 PROC SYSCTL
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 M:	Kees Cook <keescook@chromium.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
@ -12460,7 +12553,7 @@ F:	drivers/media/usb/rainshadow-cec/*

 RALINK MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/ralink

@ -12480,7 +12573,7 @@ F:	drivers/block/brd.c

 RANCHU VIRTUAL BOARD FOR MIPS
 M:	Miodrag Dinic <miodrag.dinic@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/generic/board-ranchu.c
 F:	arch/mips/configs/generic/board-ranchu.config
@ -13931,6 +14024,7 @@ S:	Supported
 F:	Documentation/devicetree/bindings/sound/
 F:	Documentation/sound/soc/
 F:	sound/soc/
+F:	include/dt-bindings/sound/
 F:	include/sound/soc*

 SOUNDWIRE SUBSYSTEM
@ -13978,11 +14072,10 @@ F:	drivers/tty/serial/sunzilog.h
 F:	drivers/tty/vcc.c

 SPARSE CHECKER
-M:	"Christopher Li" <sparse@chrisli.org>
+M:	"Luc Van Oostenryck" <luc.vanoostenryck@gmail.com>
 L:	linux-sparse@vger.kernel.org
 W:	https://sparse.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/devel/sparse/sparse.git
-T:	git git://git.kernel.org/pub/scm/devel/sparse/chrisl/sparse.git
 S:	Maintained
 F:	include/linux/compiler.h

@ -14087,6 +14180,7 @@ F:	Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt

 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Sasha Levin <sashal@kernel.org>
 L:	stable@vger.kernel.org
 S:	Supported
 F:	Documentation/process/stable-kernel-rules.rst
@ -15224,7 +15318,7 @@ F:	arch/um/os-Linux/drivers/
 TURBOCHANNEL SUBSYSTEM
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 M:	Ralf Baechle <ralf@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Maintained
 F:	drivers/tc/
@ -15460,9 +15554,9 @@ F:	include/linux/usb/gadget*

 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
 M:	Jiri Kosina <jikos@kernel.org>
-R:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
+M:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 S:	Maintained
 F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
@ -16045,7 +16139,7 @@ F:	drivers/net/vmxnet3/

 VOCORE VOCORE2 BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ralink/vocore2.dts

--- a/4
+++ b/4
@ -2,8 +2,8 @@
 VERSION = 4
 PATCHLEVEL = 20
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
-NAME = "People's Front"
+EXTRAVERSION = -rc5
+NAME = Shy Crocodile

 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
--- a/arch/alpha/include/asm/termios.h
+++ b/arch/alpha/include/asm/termios.h
@ -73,9 +73,15 @@
 })

 #define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
+	copy_from_user(k, u, sizeof(struct termios2))

 #define kernel_termios_to_user_termios(u, k) \
+	copy_to_user(u, k, sizeof(struct termios2))
+
+#define user_termios_to_kernel_termios_1(k, u) \
+	copy_from_user(k, u, sizeof(struct termios))
+
+#define kernel_termios_to_user_termios_1(u, k) \
 	copy_to_user(u, k, sizeof(struct termios))

 #endif	/* _ALPHA_TERMIOS_H */
--- a/arch/alpha/include/uapi/asm/ioctls.h
+++ b/arch/alpha/include/uapi/asm/ioctls.h
@ -32,6 +32,11 @@
 #define TCXONC		_IO('t', 30)
 #define TCFLSH		_IO('t', 31)

+#define TCGETS2		_IOR('T', 42, struct termios2)
+#define TCSETS2		_IOW('T', 43, struct termios2)
+#define TCSETSW2	_IOW('T', 44, struct termios2)
+#define TCSETSF2	_IOW('T', 45, struct termios2)
+
 #define TIOCSWINSZ	_IOW('t', 103, struct winsize)
 #define TIOCGWINSZ	_IOR('t', 104, struct winsize)
 #define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
--- a/arch/alpha/include/uapi/asm/termbits.h
+++ b/arch/alpha/include/uapi/asm/termbits.h
@ -26,6 +26,19 @@ struct termios {
 	speed_t c_ospeed;		/* output speed */
 };

+/* Alpha has identical termios and termios2 */
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
 /* Alpha has matching termios and ktermios */

 struct ktermios {
@ -152,6 +165,7 @@ struct ktermios {
 #define B3000000  00034
 #define B3500000  00035
 #define B4000000  00036
+#define BOTHER    00037

 #define CSIZE	00001400
 #define   CS5	00000000
@ -169,6 +183,9 @@ struct ktermios {
 #define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */

+#define CIBAUD	07600000
+#define IBSHIFT	16
+
 /* c_lflag bits */
 #define ISIG	0x00000080
 #define ICANON	0x00000100
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@ -228,7 +228,7 @@
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 };

 &mmc3 {
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@ -163,7 +163,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@ -492,12 +492,6 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@ -55,7 +55,7 @@
 	};

 	chosen {
-		stdout-path = "&uart1:115200n8";
+		stdout-path = "serial0:115200n8";
 	};

 	memory@70000000 {
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@ -740,7 +740,7 @@
 			i2c1: i2c@21a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_I2C1>;
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@ -117,7 +117,9 @@
 		regulator-name = "enet_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
 	};

 	reg_pcie_gpio: regulator-pcie-gpio {
@ -180,6 +182,7 @@
 	phy-supply = <&reg_enet_3v3>;
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	status = "okay";

 	mdio {
@ -373,6 +376,8 @@
 				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
 				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
 				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+				/* phy reset */
+				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
 			>;
 		};

--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@ -129,7 +129,7 @@
 };

 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@ -35,7 +35,7 @@
 * jumpering combinations for the long run.
 */
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@ -10,7 +10,11 @@
 #include "rk3288.dtsi"

 / {
-	memory@0 {
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@ -314,7 +314,7 @@
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
 				  0x3 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&h32ck>;
 			status = "disabled";

 			nand_controller: nand-controller {
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@ -50,8 +50,8 @@
 	compatible = "fsl,vf610m4";

 	chosen {
-		bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
-		stdout-path = "&uart2";
+		bootargs = "clk_ignore_unused init=/linuxrc rw";
+		stdout-path = "serial2:115200";
 	};

 	memory@8c000000 {
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@ -1,7 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@ -111,6 +111,7 @@
 #include <linux/kernel.h>

 extern unsigned int processor_id;
+struct proc_info_list *lookup_processor(u32 midr);

 #ifdef CONFIG_CPU_CP15
 #define read_cpuid(reg)							\
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@ -10,7 +10,7 @@
 #ifndef _ASM_PGTABLE_2LEVEL_H
 #define _ASM_PGTABLE_2LEVEL_H

-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1

 /*
 * Hardware-wise, we have a two level page table structure, where the first
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@ -23,7 +23,7 @@ struct mm_struct;
 /*
 * Don't change this structure - ASM code relies on it.
 */
-extern struct processor {
+struct processor {
 	/* MISC
 	 * get data abort address/flags
 	 */
@ -79,9 +79,13 @@ extern struct processor {
 	unsigned int suspend_size;
 	void (*do_suspend)(void *);
 	void (*do_resume)(void *);
-} processor;
+};

 #ifndef MULTI_CPU
+static inline void init_proc_vtable(const struct processor *p)
+{
+}
+
 extern void cpu_proc_init(void);
 extern void cpu_proc_fin(void);
 extern int cpu_do_idle(void);
@ -98,17 +102,50 @@ extern void cpu_reset(unsigned long addr, bool hvc) __attribute__((noreturn));
 extern void cpu_do_suspend(void *);
 extern void cpu_do_resume(void *);
 #else
-#define cpu_proc_init			processor._proc_init
-#define cpu_proc_fin			processor._proc_fin
-#define cpu_reset			processor.reset
-#define cpu_do_idle			processor._do_idle
-#define cpu_dcache_clean_area		processor.dcache_clean_area
-#define cpu_set_pte_ext			processor.set_pte_ext
-#define cpu_do_switch_mm		processor.switch_mm

-/* These three are private to arch/arm/kernel/suspend.c */
-#define cpu_do_suspend			processor.do_suspend
-#define cpu_do_resume			processor.do_resume
+extern struct processor processor;
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+#include <linux/smp.h>
+/*
+ * This can't be a per-cpu variable because we need to access it before
+ * per-cpu has been initialised.  We have a couple of functions that are
+ * called in a pre-emptible context, and so can't use smp_processor_id()
+ * there, hence PROC_TABLE().  We insist in init_proc_vtable() that the
+ * function pointers for these are identical across all CPUs.
+ */
+extern struct processor *cpu_vtable[];
+#define PROC_VTABLE(f)			cpu_vtable[smp_processor_id()]->f
+#define PROC_TABLE(f)			cpu_vtable[0]->f
+static inline void init_proc_vtable(const struct processor *p)
+{
+	unsigned int cpu = smp_processor_id();
+	*cpu_vtable[cpu] = *p;
+	WARN_ON_ONCE(cpu_vtable[cpu]->dcache_clean_area !=
+		     cpu_vtable[0]->dcache_clean_area);
+	WARN_ON_ONCE(cpu_vtable[cpu]->set_pte_ext !=
+		     cpu_vtable[0]->set_pte_ext);
+}
+#else
+#define PROC_VTABLE(f)			processor.f
+#define PROC_TABLE(f)			processor.f
+static inline void init_proc_vtable(const struct processor *p)
+{
+	processor = *p;
+}
+#endif
+
+#define cpu_proc_init			PROC_VTABLE(_proc_init)
+#define cpu_check_bugs			PROC_VTABLE(check_bugs)
+#define cpu_proc_fin			PROC_VTABLE(_proc_fin)
+#define cpu_reset			PROC_VTABLE(reset)
+#define cpu_do_idle			PROC_VTABLE(_do_idle)
+#define cpu_dcache_clean_area		PROC_TABLE(dcache_clean_area)
+#define cpu_set_pte_ext			PROC_TABLE(set_pte_ext)
+#define cpu_do_switch_mm		PROC_VTABLE(switch_mm)
+
+/* These two are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend			PROC_VTABLE(do_suspend)
+#define cpu_do_resume			PROC_VTABLE(do_resume)
 #endif

 extern void cpu_resume(void);
--- a/arch/arm/kernel/bugs.c
+++ b/arch/arm/kernel/bugs.c
@ -6,8 +6,8 @@
 void check_other_bugs(void)
 {
 #ifdef MULTI_CPU
-	if (processor.check_bugs)
-		processor.check_bugs();
+	if (cpu_check_bugs)
+		cpu_check_bugs();
 #endif
 }

--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@ -183,9 +183,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
-	struct ftrace_graph_ent trace;
 	unsigned long old;
-	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
@ -193,21 +191,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	old = *parent;
 	*parent = return_hooker;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
+	if (function_graph_enter(old, self_addr, frame_pointer, NULL))
 		*parent = old;
-		return;
-	}
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-	if (err == -EBUSY) {
-		*parent = old;
-		return;
-	}
 }

 #ifdef CONFIG_DYNAMIC_FTRACE
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@ -145,6 +145,9 @@ __mmap_switched_data:
 #endif
 	.size	__mmap_switched_data, . - __mmap_switched_data

+	__FINIT
+	.text
+
 /*
 * This provides a C-API version of __lookup_processor_type
 */
@ -156,9 +159,6 @@ ENTRY(lookup_processor_type)
 	ldmfd	sp!, {r4 - r6, r9, pc}
 ENDPROC(lookup_processor_type)

-	__FINIT
-	.text
-
 /*
 * Read processor ID register (CP#15, CR0), and look up in the linker-built
 * supported processor list.  Note that we can't use the absolute addresses
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@ -114,6 +114,11 @@ EXPORT_SYMBOL(elf_hwcap2);

 #ifdef MULTI_CPU
 struct processor processor __ro_after_init;
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+struct processor *cpu_vtable[NR_CPUS] = {
+	[0] = &processor,
+};
+#endif
 #endif
 #ifdef MULTI_TLB
 struct cpu_tlb_fns cpu_tlb __ro_after_init;
@ -666,28 +671,33 @@ static void __init smp_build_mpidr_hash(void)
 }
 #endif

+/*
+ * locate processor in the list of supported processor types.  The linker
+ * builds this table for us from the entries in arch/arm/mm/proc-*.S
+ */
+struct proc_info_list *lookup_processor(u32 midr)
+{
+	struct proc_info_list *list = lookup_processor_type(midr);
+
+	if (!list) {
+		pr_err("CPU%u: configuration botched (ID %08x), CPU halted\n",
+		       smp_processor_id(), midr);
+		while (1)
+		/* can't use cpu_relax() here as it may require MMU setup */;
+	}
+
+	return list;
+}
+
 static void __init setup_processor(void)
 {
-	struct proc_info_list *list;
-
-	/*
-	 * locate processor in the list of supported processor
-	 * types.  The linker builds this table for us from the
-	 * entries in arch/arm/mm/proc-*.S
-	 */
-	list = lookup_processor_type(read_cpuid_id());
-	if (!list) {
-		pr_err("CPU configuration botched (ID %08x), unable to continue.\n",
-		       read_cpuid_id());
-		while (1);
-	}
+	unsigned int midr = read_cpuid_id();
+	struct proc_info_list *list = lookup_processor(midr);

 	cpu_name = list->cpu_name;
 	__cpu_architecture = __get_cpu_architecture();

-#ifdef MULTI_CPU
-	processor = *list->proc;
-#endif
+	init_proc_vtable(list->proc);
 #ifdef MULTI_TLB
 	cpu_tlb = *list->tlb;
 #endif
@ -699,7 +709,7 @@ static void __init setup_processor(void)
 #endif

 	pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
-		cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
+		list->cpu_name, midr, midr & 15,
 		proc_arch[cpu_architecture()], get_cr());

 	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@ -42,6 +42,7 @@
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
+#include <asm/procinfo.h>
 #include <asm/processor.h>
 #include <asm/sections.h>
 #include <asm/tlbflush.h>
@ -102,6 +103,30 @@ static unsigned long get_arch_pgd(pgd_t *pgd)
 #endif
 }

+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+static int secondary_biglittle_prepare(unsigned int cpu)
+{
+	if (!cpu_vtable[cpu])
+		cpu_vtable[cpu] = kzalloc(sizeof(*cpu_vtable[cpu]), GFP_KERNEL);
+
+	return cpu_vtable[cpu] ? 0 : -ENOMEM;
+}
+
+static void secondary_biglittle_init(void)
+{
+	init_proc_vtable(lookup_processor(read_cpuid_id())->proc);
+}
+#else
+static int secondary_biglittle_prepare(unsigned int cpu)
+{
+	return 0;
+}
+
+static void secondary_biglittle_init(void)
+{
+}
+#endif
+
 int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
@ -109,6 +134,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	if (!smp_ops.smp_boot_secondary)
 		return -ENOSYS;

+	ret = secondary_biglittle_prepare(cpu);
+	if (ret)
+		return ret;
+
 	/*
 	 * We need to tell the secondary core where to find
 	 * its stack and the page tables.
@ -359,6 +388,8 @@ asmlinkage void secondary_start_kernel(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu;

+	secondary_biglittle_init();
+
 	/*
 	 * The identity mapping is uncached (strongly ordered), so
 	 * switch away from it before attempting any exclusive accesses.
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@ -759,7 +759,9 @@ static struct davinci_id da830_ids[] = {
 };

 static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.ngpio = 128,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 128,
 };

 int __init da830_register_gpio(void)
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@ -719,7 +719,9 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 }

 static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.ngpio = 144,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 144,
 };

 int __init da850_register_gpio(void)
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@ -701,6 +701,46 @@ static struct resource da8xx_gpio_resources[] = {
 	},
 	{ /* interrupt */
 		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO1,
+		.end	= IRQ_DA8XX_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO2,
+		.end	= IRQ_DA8XX_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO3,
+		.end	= IRQ_DA8XX_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO4,
+		.end	= IRQ_DA8XX_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO5,
+		.end	= IRQ_DA8XX_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO6,
+		.end	= IRQ_DA8XX_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO7,
+		.end	= IRQ_DA8XX_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO8,
 		.end	= IRQ_DA8XX_GPIO8,
 		.flags	= IORESOURCE_IRQ,
 	},
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@ -548,12 +548,44 @@ static struct resource dm355_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK1,
+		.end	= IRQ_DM355_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK2,
+		.end	= IRQ_DM355_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK3,
+		.end	= IRQ_DM355_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK4,
+		.end	= IRQ_DM355_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK5,
+		.end	= IRQ_DM355_GPIOBNK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK6,
 		.end	= IRQ_DM355_GPIOBNK6,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 };

--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@ -267,12 +267,49 @@ static struct resource dm365_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO1,
+		.end	= IRQ_DM365_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO2,
+		.end	= IRQ_DM365_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO3,
+		.end	= IRQ_DM365_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO4,
+		.end	= IRQ_DM365_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO5,
+		.end	= IRQ_DM365_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO6,
+		.end	= IRQ_DM365_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO7,
 		.end	= IRQ_DM365_GPIO7,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 	.gpio_unbanked	= 8,
 };
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@ -492,12 +492,34 @@ static struct resource dm644_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK1,
+		.end	= IRQ_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK2,
+		.end	= IRQ_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK3,
+		.end	= IRQ_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK4,
 		.end	= IRQ_GPIOBNK4,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 71,
 };

--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@ -442,12 +442,24 @@ static struct resource dm646x_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK1,
+		.end	= IRQ_DM646X_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK2,
 		.end	= IRQ_DM646X_GPIOBNK2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 43,
 };

--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@ -750,6 +750,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
 	struct modem_private_data *priv = port->private_data;
 	int ret;

+	if (!priv)
+		return;
+
 	if (IS_ERR(priv->regulator))
 		return;

--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@ -209,11 +209,61 @@ static int __init omapdss_init_fbdev(void)

 	return 0;
 }
-#else
-static inline int omapdss_init_fbdev(void)
+
+static const char * const omapdss_compat_names[] __initconst = {
+	"ti,omap2-dss",
+	"ti,omap3-dss",
+	"ti,omap4-dss",
+	"ti,omap5-dss",
+	"ti,dra7-dss",
+};
+
+static struct device_node * __init omapdss_find_dss_of_node(void)
 {
-	return 0;
+	struct device_node *node;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) {
+		node = of_find_compatible_node(NULL, NULL,
+			omapdss_compat_names[i]);
+		if (node)
+			return node;
+	}
+
+	return NULL;
 }
+
+static int __init omapdss_init_of(void)
+{
+	int r;
+	struct device_node *node;
+	struct platform_device *pdev;
+
+	/* only create dss helper devices if dss is enabled in the .dts */
+
+	node = omapdss_find_dss_of_node();
+	if (!node)
+		return 0;
+
+	if (!of_device_is_available(node))
+		return 0;
+
+	pdev = of_find_device_by_node(node);
+
+	if (!pdev) {
+		pr_err("Unable to find DSS platform device\n");
+		return -ENODEV;
+	}
+
+	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	if (r) {
+		pr_err("Unable to populate DSS submodule devices\n");
+		return r;
+	}
+
+	return omapdss_init_fbdev();
+}
+omap_device_initcall(omapdss_init_of);
 #endif /* CONFIG_FB_OMAP2 */

 static void dispc_disable_outputs(void)
@ -361,58 +411,3 @@ int omap_dss_reset(struct omap_hwmod *oh)

 	return r;
 }
-
-static const char * const omapdss_compat_names[] __initconst = {
-	"ti,omap2-dss",
-	"ti,omap3-dss",
-	"ti,omap4-dss",
-	"ti,omap5-dss",
-	"ti,dra7-dss",
-};
-
-static struct device_node * __init omapdss_find_dss_of_node(void)
-{
-	struct device_node *node;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) {
-		node = of_find_compatible_node(NULL, NULL,
-			omapdss_compat_names[i]);
-		if (node)
-			return node;
-	}
-
-	return NULL;
-}
-
-static int __init omapdss_init_of(void)
-{
-	int r;
-	struct device_node *node;
-	struct platform_device *pdev;
-
-	/* only create dss helper devices if dss is enabled in the .dts */
-
-	node = omapdss_find_dss_of_node();
-	if (!node)
-		return 0;
-
-	if (!of_device_is_available(node))
-		return 0;
-
-	pdev = of_find_device_by_node(node);
-
-	if (!pdev) {
-		pr_err("Unable to find DSS platform device\n");
-		return -ENODEV;
-	}
-
-	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
-	if (r) {
-		pr_err("Unable to populate DSS submodule devices\n");
-		return r;
-	}
-
-	return omapdss_init_fbdev();
-}
-omap_device_initcall(omapdss_init_of);
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@ -351,7 +351,7 @@ static void omap44xx_prm_reconfigure_io_chain(void)
 * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
 * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
 */
-static void __init omap44xx_prm_enable_io_wakeup(void)
+static void omap44xx_prm_enable_io_wakeup(void)
 {
 	s32 inst = omap4_prmst_get_prm_dev_inst();

--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@ -52,8 +52,6 @@ static void cpu_v7_spectre_init(void)
 	case ARM_CPU_PART_CORTEX_A17:
 	case ARM_CPU_PART_CORTEX_A73:
 	case ARM_CPU_PART_CORTEX_A75:
-		if (processor.switch_mm != cpu_v7_bpiall_switch_mm)
-			goto bl_error;
 		per_cpu(harden_branch_predictor_fn, cpu) =
 			harden_branch_predictor_bpiall;
 		spectre_v2_method = "BPIALL";
@ -61,8 +59,6 @@ static void cpu_v7_spectre_init(void)

 	case ARM_CPU_PART_CORTEX_A15:
 	case ARM_CPU_PART_BRAHMA_B15:
-		if (processor.switch_mm != cpu_v7_iciallu_switch_mm)
-			goto bl_error;
 		per_cpu(harden_branch_predictor_fn, cpu) =
 			harden_branch_predictor_iciallu;
 		spectre_v2_method = "ICIALLU";
@ -88,11 +84,9 @@ static void cpu_v7_spectre_init(void)
 					  ARM_SMCCC_ARCH_WORKAROUND_1, &res);
 			if ((int)res.a0 != 0)
 				break;
-			if (processor.switch_mm != cpu_v7_hvc_switch_mm && cpu)
-				goto bl_error;
 			per_cpu(harden_branch_predictor_fn, cpu) =
 				call_hvc_arch_workaround_1;
-			processor.switch_mm = cpu_v7_hvc_switch_mm;
+			cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
 			spectre_v2_method = "hypervisor";
 			break;

@ -101,11 +95,9 @@ static void cpu_v7_spectre_init(void)
 					  ARM_SMCCC_ARCH_WORKAROUND_1, &res);
 			if ((int)res.a0 != 0)
 				break;
-			if (processor.switch_mm != cpu_v7_smc_switch_mm && cpu)
-				goto bl_error;
 			per_cpu(harden_branch_predictor_fn, cpu) =
 				call_smc_arch_workaround_1;
-			processor.switch_mm = cpu_v7_smc_switch_mm;
+			cpu_do_switch_mm = cpu_v7_smc_switch_mm;
 			spectre_v2_method = "firmware";
 			break;

@ -119,11 +111,6 @@ static void cpu_v7_spectre_init(void)
 	if (spectre_v2_method)
 		pr_info("CPU%u: Spectre v2: using %s workaround\n",
 			smp_processor_id(), spectre_v2_method);
-	return;
-
-bl_error:
-	pr_err("CPU%u: Spectre v2: incorrect context switching function, system vulnerable\n",
-		cpu);
 }
 #else
 static void cpu_v7_spectre_init(void)
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@ -112,7 +112,7 @@ ENTRY(cpu_v7_hvc_switch_mm)
 	hvc	#0
 	ldmfd	sp!, {r0 - r3}
 	b	cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+ENDPROC(cpu_v7_hvc_switch_mm)
 #endif
 ENTRY(cpu_v7_iciallu_switch_mm)
 	mov	r3, #0
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@ -573,7 +573,7 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp *ufp,
 	 */
 	ufp_exc->fpexc = hwstate->fpexc;
 	ufp_exc->fpinst = hwstate->fpinst;
-	ufp_exc->fpinst2 = ufp_exc->fpinst2;
+	ufp_exc->fpinst2 = hwstate->fpinst2;

 	/* Ensure that VFP is disabled. */
 	vfp_flush_hwstate(thread);
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -497,6 +497,24 @@ config ARM64_ERRATUM_1188873

 	  If unsure, say Y.

+config ARM64_ERRATUM_1286807
+	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds workaround for ARM Cortex-A76 erratum 1286807
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual
+	  address for a cacheable mapping of a location is being
+	  accessed by a core while another core is remapping the virtual
+	  address to a new physical page using the recommended
+	  break-before-make sequence, then under very rare circumstances
+	  TLBI+DSB completes before a read using the translation being
+	  invalidated has been observed by other observers. The
+	  workaround repeats the TLBI+DSB operation.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@ -566,9 +584,16 @@ config QCOM_FALKOR_ERRATUM_1003
 	  is unchanged. Work around the erratum by invalidating the walk cache
 	  entries for the trampoline before entering the kernel proper.

+config ARM64_WORKAROUND_REPEAT_TLBI
+	bool
+	help
+	  Enable the repeat TLBI workaround for Falkor erratum 1009 and
+	  Cortex-A76 erratum 1286807.
+
 config QCOM_FALKOR_ERRATUM_1009
 	bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
 	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  On Falkor v1, the CPU may prematurely complete a DSB following a
 	  TLBI xxIS invalidate maintenance operation. Repeat the TLBI operation
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@ -139,6 +139,7 @@
 			clock-names = "stmmaceth";
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
 			status = "disabled";
 		};

@ -154,6 +155,7 @@
 			clock-names = "stmmaceth";
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
 			status = "disabled";
 		};

@ -169,6 +171,7 @@
 			clock-names = "stmmaceth";
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
 			status = "disabled";
 		};

--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@ -241,3 +241,7 @@
 		};
 	};
 };
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@ -352,6 +352,10 @@
 	status = "okay";
 };

+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
 &uart9 {
 	status = "okay";
 };
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@ -652,7 +652,7 @@
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
 			       <&dmac2 0x35>, <&dmac2 0x34>;
-			dma-names = "tx", "rx";
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 518>;
 			status = "disabled";
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@ -15,7 +15,7 @@

 	aliases {
 		serial0 = &scif0;
-		ethernet0 = &avb;
+		ethernet0 = &gether;
 	};

 	chosen {
@ -97,23 +97,6 @@
 	};
 };

-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy0>;
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
 &canfd {
 	pinctrl-0 = <&canfd0_pins>;
 	pinctrl-names = "default";
@ -139,6 +122,23 @@
 	clock-frequency = <32768>;
 };

+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
@ -236,16 +236,17 @@
 };

 &pfc {
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_rgmii";
-		function = "avb";
-	};
-
 	canfd0_pins: canfd0 {
 		groups = "canfd0_data_a";
 		function = "canfd0";
 	};

+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
 	i2c0_pins: i2c0 {
 		groups = "i2c0";
 		function = "i2c0";
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@ -153,7 +153,7 @@
 };

 &pcie0 {
-	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@ -57,18 +57,6 @@
 		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 0>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
-
 };

 &cpu_l0 {
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@ -36,7 +36,7 @@

 	wkup_uart0: serial@42300000 {
 		compatible = "ti,am654-uart";
-		reg = <0x00 0x42300000 0x00 0x100>;
+		reg = <0x42300000 0x100>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@ -56,6 +56,19 @@ static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs)
 {
 	return is_compat_task();
 }
+
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	/*
+	 * Since all syscall functions have __arm64_ prefix, we must skip it.
+	 * However, as we described above, we decided to ignore compat
+	 * syscalls, so we don't care about __arm64_compat_ prefix here.
+	 */
+	return !strcmp(sym + 8, name);
+}
 #endif /* ifndef __ASSEMBLY__ */

 #endif /* __ASM_FTRACE_H */
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@ -24,6 +24,14 @@
 #define KERNEL_DS	UL(-1)
 #define USER_DS		(TASK_SIZE_64 - 1)

+/*
+ * On arm64 systems, unaligned accesses by the CPU are cheap, and so there is
+ * no point in shifting all network buffers by 2 bytes just to make some IP
+ * header fields appear aligned in memory, potentially sacrificing some DMA
+ * performance on some platforms.
+ */
+#define NET_IP_ALIGN	0
+
 #ifndef __ASSEMBLY__
 #ifdef __KERNEL__

--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@ -468,7 +468,7 @@
 			 SCTLR_ELx_SA     | SCTLR_ELx_I    | SCTLR_ELx_WXN | \
 			 SCTLR_ELx_DSSBS | ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0)

-#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffff
+#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffffUL
 #error "Inconsistent SCTLR_EL2 set/clear bits"
 #endif

@ -509,7 +509,7 @@
 			 SCTLR_EL1_UMA | SCTLR_ELx_WXN     | ENDIAN_CLEAR_EL1 |\
 			 SCTLR_ELx_DSSBS | SCTLR_EL1_NTWI  | SCTLR_EL1_RES0)

-#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffff
+#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffffUL
 #error "Inconsistent SCTLR_EL1 set/clear bits"
 #endif

--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@ -41,14 +41,14 @@
 		   ALTERNATIVE("nop\n			nop",		       \
 			       "dsb ish\n		tlbi " #op,	       \
 			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
-			       CONFIG_QCOM_FALKOR_ERRATUM_1009)		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
 			    : : )

 #define __TLBI_1(op, arg) asm ("tlbi " #op ", %0\n"			       \
 		   ALTERNATIVE("nop\n			nop",		       \
 			       "dsb ish\n		tlbi " #op ", %0",     \
 			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
-			       CONFIG_QCOM_FALKOR_ERRATUM_1009)		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
 			    : : "r" (arg))

 #define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg)
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@ -570,6 +570,20 @@ static const struct midr_range arm64_harden_el2_vectors[] = {

 #endif

+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
+
+static const struct midr_range arm64_repeat_tlbi_cpus[] = {
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+	MIDR_RANGE(MIDR_QCOM_FALKOR_V1, 0, 0, 0, 0),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1286807
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+#endif
+	{},
+};
+
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #if	defined(CONFIG_ARM64_ERRATUM_826319) || \
 	defined(CONFIG_ARM64_ERRATUM_827319) || \
@ -695,11 +709,11 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.matches = is_kryo_midr,
 	},
 #endif
-#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
 	{
-		.desc = "Qualcomm Technologies Falkor erratum 1009",
+		.desc = "Qualcomm erratum 1009, ARM erratum 1286807",
 		.capability = ARM64_WORKAROUND_REPEAT_TLBI,
-		ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0),
+		ERRATA_MIDR_RANGE_LIST(arm64_repeat_tlbi_cpus),
 	},
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_858921
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@ -1333,7 +1333,6 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.cpu_enable = cpu_enable_hw_dbm,
 	},
 #endif
-#ifdef CONFIG_ARM64_SSBD
 	{
 		.desc = "CRC32 instructions",
 		.capability = ARM64_HAS_CRC32,
@ -1343,6 +1342,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.field_pos = ID_AA64ISAR0_CRC32_SHIFT,
 		.min_field_value = 1,
 	},
+#ifdef CONFIG_ARM64_SSBD
 	{
 		.desc = "Speculative Store Bypassing Safe (SSBS)",
 		.capability = ARM64_SSBS,
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@ -216,8 +216,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
 	unsigned long old;
-	struct ftrace_graph_ent trace;
-	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
@ -229,18 +227,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	 */
 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-	if (err == -EBUSY)
-		return;
-	else
+	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
 		*parent = return_hooker;
 }

--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@ -313,6 +313,7 @@ void __init setup_arch(char **cmdline_p)
 	arm64_memblock_init();

 	paging_init();
+	efi_apply_persistent_mem_reservations();

 	acpi_table_upgrade();

--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@ -483,8 +483,6 @@ void __init arm64_memblock_init(void)
 	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;

 	dma_contiguous_reserve(arm64_dma_phys_limit);
-
-	memblock_allow_resize();
 }

 void __init bootmem_init(void)
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@ -659,6 +659,8 @@ void __init paging_init(void)

 	memblock_free(__pa_symbol(init_pg_dir),
 		      __pa_symbol(init_pg_end) - __pa_symbol(init_pg_dir));
+
+	memblock_allow_resize();
 }

 /*
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@ -351,7 +351,8 @@ static void build_epilogue(struct jit_ctx *ctx)
 * >0 - successfully JITed a 16-byte eBPF instruction.
 * <0 - failed to JIT.
 */
-static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
+static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
+		      bool extra_pass)
 {
 	const u8 code = insn->code;
 	const u8 dst = bpf2a64[insn->dst_reg];
@ -625,12 +626,19 @@ emit_cond_jmp:
 	case BPF_JMP | BPF_CALL:
 	{
 		const u8 r0 = bpf2a64[BPF_REG_0];
-		const u64 func = (u64)__bpf_call_base + imm;
+		bool func_addr_fixed;
+		u64 func_addr;
+		int ret;

-		if (ctx->prog->is_func)
-			emit_addr_mov_i64(tmp, func, ctx);
+		ret = bpf_jit_get_func_addr(ctx->prog, insn, extra_pass,
+					    &func_addr, &func_addr_fixed);
+		if (ret < 0)
+			return ret;
+		if (func_addr_fixed)
+			/* We can use optimized emission here. */
+			emit_a64_mov_i64(tmp, func_addr, ctx);
 		else
-			emit_a64_mov_i64(tmp, func, ctx);
+			emit_addr_mov_i64(tmp, func_addr, ctx);
 		emit(A64_BLR(tmp), ctx);
 		emit(A64_MOV(1, r0, A64_R(0)), ctx);
 		break;
@ -753,7 +761,7 @@ emit_cond_jmp:
 	return 0;
 }

-static int build_body(struct jit_ctx *ctx)
+static int build_body(struct jit_ctx *ctx, bool extra_pass)
 {
 	const struct bpf_prog *prog = ctx->prog;
 	int i;
@ -762,7 +770,7 @@ static int build_body(struct jit_ctx *ctx)
 		const struct bpf_insn *insn = &prog->insnsi[i];
 		int ret;

-		ret = build_insn(insn, ctx);
+		ret = build_insn(insn, ctx, extra_pass);
 		if (ret > 0) {
 			i++;
 			if (ctx->image == NULL)
@ -858,7 +866,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	/* 1. Initial fake pass to compute ctx->idx. */

 	/* Fake pass to fill in ctx->offset. */
-	if (build_body(&ctx)) {
+	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
 		goto out_off;
 	}
@ -888,7 +896,7 @@ skip_init_ctx:

 	build_prologue(&ctx, was_classic);

-	if (build_body(&ctx)) {
+	if (build_body(&ctx, extra_pass)) {
 		bpf_jit_binary_free(header);
 		prog = orig_prog;
 		goto out_off;
--- a/arch/ia64/include/asm/numa.h
+++ b/arch/ia64/include/asm/numa.h
@ -59,7 +59,9 @@ extern struct node_cpuid_s node_cpuid[NR_CPUS];
 */

 extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
-#define node_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
+#define slit_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
+extern int __node_distance(int from, int to);
+#define node_distance(from,to) __node_distance(from, to)

 extern int paddr_to_nid(unsigned long paddr);

--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@ -578,8 +578,8 @@ void __init acpi_numa_fixup(void)
 	if (!slit_table) {
 		for (i = 0; i < MAX_NUMNODES; i++)
 			for (j = 0; j < MAX_NUMNODES; j++)
-				node_distance(i, j) = i == j ? LOCAL_DISTANCE :
-							REMOTE_DISTANCE;
+				slit_distance(i, j) = i == j ?
+					LOCAL_DISTANCE : REMOTE_DISTANCE;
 		return;
 	}

@ -592,7 +592,7 @@ void __init acpi_numa_fixup(void)
 			if (!pxm_bit_test(j))
 				continue;
 			node_to = pxm_to_node(j);
-			node_distance(node_from, node_to) =
+			slit_distance(node_from, node_to) =
 			    slit_table->entry[i * slit_table->locality_count + j];
 		}
 	}
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@ -36,6 +36,12 @@ struct node_cpuid_s node_cpuid[NR_CPUS] =
 */
 u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];

+int __node_distance(int from, int to)
+{
+	return slit_distance(from, to);
+}
+EXPORT_SYMBOL(__node_distance);
+
 /* Identify which cnode a physical address resides on */
 int
 paddr_to_nid(unsigned long paddr)
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@ -55,12 +55,12 @@
 */
 #ifdef CONFIG_SUN3
 #define PTRS_PER_PTE   16
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 #define PTRS_PER_PMD   1
 #define PTRS_PER_PGD   2048
 #elif defined(CONFIG_COLDFIRE)
 #define PTRS_PER_PTE	512
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 #define PTRS_PER_PMD	1
 #define PTRS_PER_PGD	1024
 #else
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@ -63,7 +63,7 @@ extern int mem_init_done;

 #include <asm-generic/4level-fixup.h>

-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1

 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@ -22,8 +22,7 @@
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 {
 	unsigned long old;
-	int faulted, err;
-	struct ftrace_graph_ent trace;
+	int faulted;
 	unsigned long return_hooker = (unsigned long)
 				&return_to_handler;

@ -63,18 +62,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}

-	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
-	if (err == -EBUSY) {
+	if (function_graph_enter(old, self_addr, 0, NULL))
 		*parent = old;
-		return;
-	}
-
-	trace.func = self_addr;
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		*parent = old;
-	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */

--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@ -67,7 +67,7 @@ void (*cvmx_override_pko_queue_priority) (int pko_port,
 void (*cvmx_override_ipd_port_setup) (int ipd_port);

 /* Port count per interface */
-static int interface_port_count[5];
+static int interface_port_count[9];

 /**
 * Return the number of interfaces the chip has. Each interface
--- a/arch/mips/configs/cavium_octeon_defconfig
+++ b/arch/mips/configs/cavium_octeon_defconfig
@ -140,6 +140,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_STAGING=y
 CONFIG_OCTEON_ETHERNET=y
+CONFIG_OCTEON_USB=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_RAS=y
 CONFIG_EXT4_FS=y
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@ -73,7 +73,7 @@ static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
 #ifdef CONFIG_64BIT
 	case 4: case 5: case 6: case 7:
 #ifdef CONFIG_MIPS32_O32
-		if (test_thread_flag(TIF_32BIT_REGS))
+		if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
 			return get_user(*arg, (int *)usp + n);
 		else
 #endif
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@ -322,7 +322,6 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 			   unsigned long fp)
 {
 	unsigned long old_parent_ra;
-	struct ftrace_graph_ent trace;
 	unsigned long return_hooker = (unsigned long)
 	    &return_to_handler;
 	int faulted, insns;
@ -369,12 +368,6 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	if (unlikely(faulted))
 		goto out;

-	if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp,
-				     NULL) == -EBUSY) {
-		*parent_ra_addr = old_parent_ra;
-		return;
-	}
-
 	/*
 	 * Get the recorded ip of the current mcount calling site in the
 	 * __mcount_loc section, which will be used to filter the function
@ -382,13 +375,10 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	 */

 	insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
-	trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);
+	self_ra -= (MCOUNT_INSN_SIZE * insns);

-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
+	if (function_graph_enter(old_parent_ra, self_ra, fp, NULL))
 		*parent_ra_addr = old_parent_ra;
-	}
 	return;
 out:
 	ftrace_graph_stop();
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@ -794,6 +794,7 @@ static void __init arch_mem_init(char **cmdline_p)

 	/* call board setup routine */
 	plat_mem_setup();
+	memblock_set_bottom_up(true);

 	/*
 	 * Make sure all kernel memory is in the maps.  The "UP" and
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@ -2260,10 +2260,8 @@ void __init trap_init(void)
 		unsigned long size = 0x200 + VECTORSPACING*64;
 		phys_addr_t ebase_pa;

-		memblock_set_bottom_up(true);
 		ebase = (unsigned long)
 			memblock_alloc_from(size, 1 << fls(size), 0);
-		memblock_set_bottom_up(false);

 		/*
 		 * Try to ensure ebase resides in KSeg0 if possible.
@ -2307,6 +2305,7 @@ void __init trap_init(void)
 	if (board_ebase_setup)
 		board_ebase_setup();
 	per_cpu_trap_init(true);
+	memblock_set_bottom_up(false);

 	/*
 	 * Copy the generic exception handlers to their final destination.
--- a/arch/mips/loongson64/loongson-3/numa.c
+++ b/arch/mips/loongson64/loongson-3/numa.c
@ -231,6 +231,8 @@ static __init void prom_meminit(void)
 			cpumask_clear(&__node_data[(node)]->cpumask);
 		}
 	}
+	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
+
 	for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {
 		node = cpu / loongson_sysconf.cores_per_node;
 		if (node >= num_online_nodes())
@ -248,19 +250,9 @@ static __init void prom_meminit(void)

 void __init paging_init(void)
 {
-	unsigned node;
 	unsigned long zones_size[MAX_NR_ZONES] = {0, };

 	pagetable_init();
-
-	for_each_online_node(node) {
-		unsigned long  start_pfn, end_pfn;
-
-		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
-
-		if (end_pfn > max_low_pfn)
-			max_low_pfn = end_pfn;
-	}
 #ifdef CONFIG_ZONE_DMA32
 	zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
 #endif
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@ -50,7 +50,7 @@ void *arch_dma_alloc(struct device *dev, size_t size,
 	void *ret;

 	ret = dma_direct_alloc_pages(dev, size, dma_handle, gfp, attrs);
-	if (!ret && !(attrs & DMA_ATTR_NON_CONSISTENT)) {
+	if (ret && !(attrs & DMA_ATTR_NON_CONSISTENT)) {
 		dma_cache_wback_inv((unsigned long) ret, size);
 		ret = (void *)UNCAC_ADDR(ret);
 	}
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@ -84,7 +84,7 @@ static struct rt2880_pmx_func pcie_rst_grp[] = {
 };
 static struct rt2880_pmx_func nd_sd_grp[] = {
 	FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
-	FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
+	FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
 };

 static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@ -435,6 +435,7 @@ void __init prom_meminit(void)

 	mlreset();
 	szmem();
+	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());

 	for (node = 0; node < MAX_COMPACT_NODES; node++) {
 		if (node_online(node)) {
@ -455,18 +456,8 @@ extern void setup_zero_pages(void);
 void __init paging_init(void)
 {
 	unsigned long zones_size[MAX_NR_ZONES] = {0, };
-	unsigned node;

 	pagetable_init();
-
-	for_each_online_node(node) {
-		unsigned long start_pfn, end_pfn;
-
-		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
-
-		if (end_pfn > max_low_pfn)
-			max_low_pfn = end_pfn;
-	}
 	zones_size[ZONE_NORMAL] = max_low_pfn;
 	free_area_init_nodes(zones_size);
 }
--- a/Показать больше
+++ b/Показать больше