Merge commit 'gcl/next' into next

arch/powerpc/boot/dts/digsy_mtc.dts

@@ -155,18 +155,18 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2400 {		// PSC3
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
-		};
-
 		serial@2600 {		// PSC4
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2600 0x100>;
 			interrupts = <2 11 0>;
 		};
 
+		serial@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2800 0x100>;
+			interrupts = <2 12 0>;
+		};
+
 		ethernet@3000 {
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 			reg = <0x3000 0x400>;

arch/powerpc/boot/dts/virtex440-ml507.dts

@@ -7,6 +7,15 @@
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
+ *
+ * ---
+ *
+ * Device Tree Generator version: 1.1
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: ml507_ppc440_emb_ref
  */
 
 /dts-v1/;
@@ -22,8 +31,8 @@
 		reg = < 0 0x10000000 >;
 	} ;
 	chosen {
-		bootargs = "console=ttyS0 ip=on root=/dev/ram";
+		bootargs = "console=ttyS0 root=/dev/ram";
-		linux,stdout-path = "/plb@0/serial@83e00000";
+		linux,stdout-path = &RS232_Uart_1;
 	} ;
 	cpus {
 		#address-cells = <1>;
@@ -136,19 +145,19 @@
 				compatible = "xlnx,ll-dma-1.00.a";
 				dcr-reg = < 0x80 0x11 >;
 				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 9 2 0xa 2 >;
+				interrupts = < 10 2 11 2 >;
 			} ;
 		} ;
 	} ;
 	plb_v46_0: plb@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.02.a", "simple-bus";
+		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
 		ranges ;
 		DIP_Switches_8Bit: gpio@81460000 {
 			compatible = "xlnx,xps-gpio-1.00.a";
 			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
+			interrupts = < 7 2 >;
 			reg = < 0x81460000 0x10000 >;
 			xlnx,all-inputs = <1>;
 			xlnx,all-inputs-2 = <0>;
@@ -163,6 +172,86 @@
 			xlnx,tri-default = <0xffffffff>;
 			xlnx,tri-default-2 = <0xffffffff>;
 		} ;
+		FLASH: flash@fc000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xfc000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x2710>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x2>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
 		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -185,6 +274,19 @@
 				xlnx,txfifo = <0x1000>;
 			} ;
 		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x5f5e100>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
 		LEDs_8Bit: gpio@81400000 {
 			compatible = "xlnx,xps-gpio-1.00.a";
 			reg = < 0x81400000 0x10000 >;
@@ -220,7 +322,7 @@
 		Push_Buttons_5Bit: gpio@81440000 {
 			compatible = "xlnx,xps-gpio-1.00.a";
 			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
+			interrupts = < 8 2 >;
 			reg = < 0x81440000 0x10000 >;
 			xlnx,all-inputs = <1>;
 			xlnx,all-inputs-2 = <0>;
@@ -237,13 +339,13 @@
 		} ;
 		RS232_Uart_1: serial@83e00000 {
 			clock-frequency = <100000000>;
-			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550";
+			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
-			current-speed = <0x2580>;
+			current-speed = <9600>;
 			device_type = "serial";
 			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 2 >;
+			interrupts = < 9 2 >;
 			reg = < 0x83e00000 0x10000 >;
-			reg-offset = <3>;
+			reg-offset = <0x1003>;
 			reg-shift = <2>;
 			xlnx,family = "virtex5";
 			xlnx,has-external-rclk = <0>;
@@ -268,7 +370,7 @@
 			compatible = "xlnx,xps-intc-1.00.a";
 			interrupt-controller ;
 			reg = < 0x81800000 0x10000 >;
-			xlnx,num-intr-inputs = <0xb>;
+			xlnx,num-intr-inputs = <0xc>;
 		} ;
 		xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
 			compatible = "xlnx,xps-timebase-wdt-1.00.b";

arch/powerpc/configs/mpc5200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
+# Linux kernel version: 2.6.29-rc3
-# Mon Jan 26 21:40:44 2009
+# Fri Feb  6 09:48:53 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -388,7 +388,10 @@ CONFIG_MTD=y
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -502,7 +505,7 @@ CONFIG_MISC_DEVICES=y
 #
 # EEPROM support
 #
-# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
@@ -678,7 +681,7 @@ CONFIG_PHYLIB=y
 # CONFIG_MARVELL_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
+CONFIG_LXT_PHY=y
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
@@ -815,8 +818,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1281,7 +1282,61 @@ CONFIG_NEW_LEDS=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set

arch/powerpc/platforms/52xx/mpc52xx_common.c

@@ -28,9 +28,10 @@ static struct of_device_id mpc52xx_xlb_ids[] __initdata = {
 static struct of_device_id mpc52xx_bus_ids[] __initdata = {
 	{ .compatible = "fsl,mpc5200-immr", },
 	{ .compatible = "fsl,mpc5200b-immr", },
-	{ .compatible = "fsl,lpb", },
+	{ .compatible = "simple-bus", },
 
 	/* depreciated matches; shouldn't be used in new device trees */
+	{ .compatible = "fsl,lpb", },
 	{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
 	{ .type = "soc", .compatible = "mpc5200", }, /* lite5200 */
 	{}