[media] r820t: proper initialize the PLL register

The rtl-sdr library, from where this driver was initially
based, doesn't use half PLL clock, but this is used on
the Realtek Kernel driver. So, also do the same here.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Antti Palosaari <crope@iki.fi>

drivers/media/tuners/r820t.c

@@ -522,10 +522,12 @@ static int r820t_set_mux(struct r820t_priv *priv, u32 freq)
 	return rc;
 }
 
-static int r820t_set_pll(struct r820t_priv *priv, u32 freq)
+static int r820t_set_pll(struct r820t_priv *priv, enum v4l2_tuner_type type,
+			 u32 freq)
 {
 	u64 tmp64, vco_freq;
 	int rc, i;
+	unsigned sleep_time = 10000;
 	u32 vco_fra;		/* VCO contribution by SDM (kHz) */
 	u32 vco_min  = 1770000;
 	u32 vco_max  = vco_min * 2;
@@ -535,17 +537,34 @@ static int r820t_set_pll(struct r820t_priv *priv, u32 freq)
 	u8 mix_div = 2;
 	u8 div_buf = 0;
 	u8 div_num = 0;
+	u8 refdiv2 = 0;
 	u8 ni, si, nint, vco_fine_tune, val;
 	u8 data[5];
 
-	freq = freq / 1000;	/* Frequency in kHz */
-
+	/* Frequency in kHz */
+	freq = freq / 1000;
 	pll_ref = priv->cfg->xtal / 1000;
 
-	tuner_dbg("set r820t pll for frequency %d kHz = %d\n", freq, pll_ref);
+	if ((priv->cfg->rafael_chip == CHIP_R620D) ||
+	   (priv->cfg->rafael_chip == CHIP_R828D) ||
+	   (priv->cfg->rafael_chip == CHIP_R828)) {
+		/* ref set refdiv2, reffreq = Xtal/2 on ATV application */
+		if (type != V4L2_TUNER_DIGITAL_TV) {
+			pll_ref /= 2;
+			refdiv2 = 0x10;
+			sleep_time = 20000;
+		}
+	} else {
+		if (priv->cfg->xtal > 24000000) {
+			pll_ref /= 2;
+			refdiv2 = 0x10;
+		}
+	}
 
-	/* FIXME: this seems to be a hack - probably it can be removed */
-	rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x00);
+	tuner_dbg("set r820t pll for frequency %d kHz = %d%s\n",
+		  freq, pll_ref, refdiv2 ? " / 2" : "");
+
+	rc = r820t_write_reg_mask(priv, 0x10, refdiv2, 0x10);
 	if (rc < 0)
 		return rc;
 
@@ -598,8 +617,6 @@ static int r820t_set_pll(struct r820t_priv *priv, u32 freq)
 	do_div(tmp64, 1000);
 	vco_fra  = (u16)(tmp64);
 
-	pll_ref /= 1000;
-
 	/* boundary spur prevention */
 	if (vco_fra < pll_ref / 64) {
 		vco_fra = 0;
@@ -653,11 +670,7 @@ static int r820t_set_pll(struct r820t_priv *priv, u32 freq)
 		return rc;
 
 	for (i = 0; i < 2; i++) {
-		/*
-		 * FIXME: Rafael chips R620D, R828D and R828 seems to
-		 * need 20 ms for analog TV
-		 */
-		usleep_range(10000, 11000);
+		usleep_range(sleep_time, sleep_time + 1000);
 
 		/* Check if PLL has locked */
 		rc = r820t_read(priv, 0x00, data, 3);
@@ -1040,7 +1053,7 @@ static int r820t_set_tv_standard(struct r820t_priv *priv,
 			if (rc < 0)
 				return rc;
 
-			rc = r820t_set_pll(priv, filt_cal_lo);
+			rc = r820t_set_pll(priv, type, filt_cal_lo);
 			if (rc < 0 || !priv->has_lock)
 				return rc;
 
@@ -1244,7 +1257,7 @@ static int generic_set_freq(struct dvb_frontend *fe,
 	if (rc < 0)
 		goto err;
 
-	rc = r820t_set_pll(priv, lo_freq);
+	rc = r820t_set_pll(priv, type, lo_freq);
 	if (rc < 0 || !priv->has_lock)
 		goto err;
 

drivers/media/tuners/r820t.h

@@ -26,6 +26,9 @@
 
 enum r820t_chip {
 	CHIP_R820T,
+	CHIP_R620D,
+	CHIP_R828D,
+	CHIP_R828,
 	CHIP_R828S,
 	CHIP_R820C,
 };