microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ASoC: wm8996: Handle failures to determine accessory polarity 

If we get an indeterminate impedance with both headset polarities then
give up and report the accessory as a headphone rather than continually
retrying.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Mark Brown 2012-01-26 18:00:42 +00:00
Родитель 62c1c40127
Коммит d7b3557077
1 изменённых файлов: 26 добавлений и 12 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

38
sound/soc/codecs/wm8996.c
Просмотреть файл

@ -90,6 +90,7 @@ struct wm8996_priv {
struct snd_soc_jack *jack;
bool detecting;
bool jack_mic;
int jack_flips;
wm8996_polarity_fn polarity_cb;
#ifdef CONFIG_GPIOLIB
@ -2437,6 +2438,7 @@ int wm8996_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
wm8996->jack = jack;
wm8996->detecting = true;
wm8996->polarity_cb = polarity_cb;
wm8996->jack_flips = 0;
if (wm8996->polarity_cb)
wm8996->polarity_cb(codec, 0);
@ -2552,6 +2554,19 @@ static void wm8996_hpdet_start(struct snd_soc_codec *codec)
WM8996_HP_POLL, WM8996_HP_POLL);
}
static void wm8996_report_headphone(struct snd_soc_codec *codec)
{
dev_dbg(codec->dev, "Headphone detected\n");
wm8996_hpdet_start(codec);
/* Increase the detection rate a bit for responsiveness. */
snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
WM8996_MICD_RATE_MASK |
WM8996_MICD_BIAS_STARTTIME_MASK,
7 << WM8996_MICD_RATE_SHIFT |
7 << WM8996_MICD_BIAS_STARTTIME_SHIFT);
}
static void wm8996_micd(struct snd_soc_codec *codec)
{
struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
@ -2571,6 +2586,7 @@ static void wm8996_micd(struct snd_soc_codec *codec)
dev_dbg(codec->dev, "Jack removal detected\n");
wm8996->jack_mic = false;
wm8996->detecting = true;
wm8996->jack_flips = 0;
snd_soc_jack_report(wm8996->jack, 0,
SND_JACK_LINEOUT | SND_JACK_HEADSET |
SND_JACK_BTN_0);
@ -2611,9 +2627,17 @@ static void wm8996_micd(struct snd_soc_codec *codec)
/* If we detected a lower impedence during initial startup
* then we probably have the wrong polarity, flip it. Don't
* do this for the lowest impedences to speed up detection of
* plain headphones.
* plain headphones. If both polarities report a low
* impedence then give up and report headphones.
*/
if (wm8996->detecting && (val & 0x3f0)) {
wm8996->jack_flips++;
if (wm8996->jack_flips > 1) {
wm8996_report_headphone(codec);
return;
}
reg = snd_soc_read(codec, WM8996_ACCESSORY_DETECT_MODE_2);
reg ^= WM8996_HPOUT1FB_SRC | WM8996_MICD_SRC |
WM8996_MICD_BIAS_SRC;
@ -2640,17 +2664,7 @@ static void wm8996_micd(struct snd_soc_codec *codec)
snd_soc_jack_report(wm8996->jack, SND_JACK_BTN_0,
SND_JACK_BTN_0);
} else if (wm8996->detecting) {
dev_dbg(codec->dev, "Headphone detected\n");
wm8996_hpdet_start(codec);
/* Increase the detection rate a bit for
* responsiveness.
*/
snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
WM8996_MICD_RATE_MASK |
WM8996_MICD_BIAS_STARTTIME_MASK,
7 << WM8996_MICD_RATE_SHIFT |
7 << WM8996_MICD_BIAS_STARTTIME_SHIFT);
wm8996_report_headphone(codec);
}
}
}