Qualcomm ARM Based Device Tree Updates for v4.4
* Add DT binding document for SMEM * Add SMD, RPM, and Regulator nodes on MSM8974 * Remove extra reg element from iadc device * Remove redunandant i2c pinctrl properties on APQ8064 * Remove unnecessary eeprom label on IFC6410 * Remove unnecessary eeprom label from QS600 * Add PM8921 RTC support on APQ8064 * Add PM8921 pwrkey support on APQ8064 * Prefix GSBI6 uart pins on APQ8064 correctly * Add missing GSBI7 uart pinctrl on APQ8064 * Add missing GSBI7 uart pinctrl on IFC6410 * Add missing GSBI7 pinctrl uart property on QS600 * Add pwrseq support for WLAN on IFC6410 * Add pwrseq support for WLAN on QS600 * Add notify led support on IFC6410 * Add SD card detect support onQS600 * Add #power-domain-cells property to documentation * Add Qualcomm SMBB binding document * Add PM8941 charge node * Fix typo in disabled property on MSM8974 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJWHXppAAoJEFKiBbHx2RXVMTQQAJ1tNvm4khE+PiTaImD+WzKx Z+gUoJyKKxL67f1yaR48VEYusC3Jy2uX5tIiGLBrCyArXL3WDaRdCmISLp9p0GjT P0Y47Y+3+lCJih/WHsHbPNYFJnA3bsff0dMkC0aHbqJ+76YdPUc1nIm9IIsfTQLr Aj22v5iVBiJ/cdbGbgb+TYr0ymw0ErkUYbZi2TDPWV4NdUSViQFcyn48pXZPIus1 ajXVD5N5pmdB/Az+SKzwdpFO2XN7pUR5RXI13cqWuavX1yuVMfIR+JQdSYu8FLel DrkkhvSGzOYAO4PtWqRpxMLWOdK/IuFlgWfONpjV7h/cPOVLivrnYE7qB8f0Q8KU BIhnFeN5xG+vrJdpRgYHKGbQzlIj0wRovZb10iZQ4felv5t0dHt6DQmLdQO+Y/L6 +f+sJCG4bh9mc8t9oRSAddVm8J6sAR5Aq9sPthWiJkbTr+xBT5chlMstDQEHQZqK xOY0UMCwXuG1OLn93YCTzbq9xlw0cApYKjdRrjOS1mOVitVbUX26hiovdc/NdHnT g8159a7h1mdWhYOHssbAGZ0TgsTHtBy0ntKRIZerTTmpXdaNwPlRJB9OeM4/FQ9G 3xlVFH4vy+xSlGNt2LAIHe3aDyc81xA9+rKbZGOpyMi7PO1+9ptRvczbmwA1q565 jhTg1dVjwh0v7DBx9Aht =maQs -----END PGP SIGNATURE----- Merge tag 'qcom-dt-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm into next/dt Pull "Qualcomm ARM Based Device Tree Updates for v4.4" from Andy Gross: * Add DT binding document for SMEM * Add SMD, RPM, and Regulator nodes on MSM8974 * Remove extra reg element from iadc device * Remove redunandant i2c pinctrl properties on APQ8064 * Remove unnecessary eeprom label on IFC6410 * Remove unnecessary eeprom label from QS600 * Add PM8921 RTC support on APQ8064 * Add PM8921 pwrkey support on APQ8064 * Prefix GSBI6 uart pins on APQ8064 correctly * Add missing GSBI7 uart pinctrl on APQ8064 * Add missing GSBI7 uart pinctrl on IFC6410 * Add missing GSBI7 pinctrl uart property on QS600 * Add pwrseq support for WLAN on IFC6410 * Add pwrseq support for WLAN on QS600 * Add notify led support on IFC6410 * Add SD card detect support onQS600 * Add #power-domain-cells property to documentation * Add Qualcomm SMBB binding document * Add PM8941 charge node * Fix typo in disabled property on MSM8974 * tag 'qcom-dt-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm: ARM: dts: msm8974: fix typo in "disabled" property ARM: dts: qcom-pm8941: Add charger node dt-binding: power: Add Qualcomm SMBB binding arm: dts: qcom: Add #power-domain-cells property ARM: dts: qs600: Add SD card detect support. ARM: dts: apq8064-ifc6410: add notify led support. ARM: dts: qs600: add pwrseq support to WLAN ARM: dts: ifc6410: Add pwrseq support for WLAN ARM: dts: qs600: Add missing pinctrl property for gsbi7 uart ARM: dts: ifc6410: Add missing pinctrl to gsbi7 uart ARM: dts: apq8064: add missing gsbi7 uart pinctrl ARM: dts: apq8064: Prefix the gsbi6 uart pins correctly ARM: dts: apq8064: add pm8921 pwrkey support ARM: dts: apq8064: add pm8921 rtc ARM: dts: qs600: remove unnecessary eeprom label ARM: dts: ifc6410: remove unnecessary eeprom label ARM: dts: apq8064: remove redundant i2c pinctrl properties ARM: dts: qcom: Remove extra reg element from iadc device ARM: dts: msm8974: Add smd, rpm and regulator nodes soc: qcom: Add device tree binding for SMEM
This commit is contained in:
Arnd Bergmann
Коммит
d819e7a752
|
|
@ -18,10 +18,14 @@ Required properties :
|
|||
- #clock-cells : shall contain 1
|
||||
- #reset-cells : shall contain 1
|
||||
|
||||
Optional properties :
|
||||
- #power-domain-cells : shall contain 1
|
||||
|
||||
Example:
|
||||
clock-controller@900000 {
|
||||
compatible = "qcom,gcc-msm8960";
|
||||
reg = <0x900000 0x4000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -14,10 +14,14 @@ Required properties :
|
|||
- #clock-cells : shall contain 1
|
||||
- #reset-cells : shall contain 1
|
||||
|
||||
Optional properties :
|
||||
- #power-domain-cells : shall contain 1
|
||||
|
||||
Example:
|
||||
clock-controller@4000000 {
|
||||
compatible = "qcom,mmcc-msm8960";
|
||||
reg = <0x4000000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,131 @@
|
|||
Qualcomm Switch-Mode Battery Charger and Boost
|
||||
|
||||
PROPERTIES
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Description: Must be one of:
|
||||
- "qcom,pm8941-charger"
|
||||
|
||||
- reg:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Description: Base address of registers for SMBB block
|
||||
|
||||
- interrupts:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Description: The format of the specifier is defined by the binding document
|
||||
describing the node's interrupt parent. Must contain one
|
||||
specifier for each of the following interrupts, in order:
|
||||
- charge done
|
||||
- charge fast mode
|
||||
- charge trickle mode
|
||||
- battery temperature ok
|
||||
- battery present
|
||||
- charger disconnected
|
||||
- USB-in valid
|
||||
- DC-in valid
|
||||
|
||||
- interrupt-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Description: Must contain the following list, strictly ordered:
|
||||
"chg-done",
|
||||
"chg-fast",
|
||||
"chg-trkl",
|
||||
"bat-temp-ok",
|
||||
"bat-present",
|
||||
"chg-gone",
|
||||
"usb-valid",
|
||||
"dc-valid"
|
||||
|
||||
- qcom,fast-charge-current-limit:
|
||||
Usage: optional (default: 1A, or pre-configured value)
|
||||
Value type: <u32>; uA; range [100mA : 3A]
|
||||
Description: Maximum charge current; May be clamped to safety limits.
|
||||
|
||||
- qcom,fast-charge-low-threshold-voltage:
|
||||
Usage: optional (default: 3.2V, or pre-configured value)
|
||||
Value type: <u32>; uV; range [2.1V : 3.6V]
|
||||
Description: Battery voltage limit above which fast charging may operate;
|
||||
Below this value linear or switch-mode auto-trickle-charging
|
||||
will operate.
|
||||
|
||||
- qcom,fast-charge-high-threshold-voltage:
|
||||
Usage: optional (default: 4.2V, or pre-configured value)
|
||||
Value type: <u32>; uV; range [3.24V : 5V]
|
||||
Description: Battery voltage limit below which fast charging may operate;
|
||||
The fast charger will attempt to charge the battery to this
|
||||
voltage. May be clamped to safety limits.
|
||||
|
||||
- qcom,fast-charge-safe-voltage:
|
||||
Usage: optional (default: 4.2V, or pre-configured value)
|
||||
Value type: <u32>; uV; range [3.24V : 5V]
|
||||
Description: Maximum safe battery voltage; May be pre-set by bootloader, in
|
||||
which case, setting this will harmlessly fail. The property
|
||||
'fast-charge-high-watermark' will be clamped by this value.
|
||||
|
||||
- qcom,fast-charge-safe-current:
|
||||
Usage: optional (default: 1A, or pre-configured value)
|
||||
Value type: <u32>; uA; range [100mA : 3A]
|
||||
Description: Maximum safe battery charge current; May pre-set by bootloader,
|
||||
in which case, setting this will harmlessly fail. The property
|
||||
'qcom,fast-charge-current-limit' will be clamped by this value.
|
||||
|
||||
- qcom,auto-recharge-threshold-voltage:
|
||||
Usage: optional (default: 4.1V, or pre-configured value)
|
||||
Value type: <u32>; uV; range [3.24V : 5V]
|
||||
Description: Battery voltage limit below which auto-recharge functionality
|
||||
will restart charging after end-of-charge; The high cutoff
|
||||
limit for auto-recharge is 5% above this value.
|
||||
|
||||
- qcom,minimum-input-voltage:
|
||||
Usage: optional (default: 4.3V, or pre-configured value)
|
||||
Value type: <u32>; uV; range [4.2V : 9.6V]
|
||||
Description: Input voltage level above which charging may operate
|
||||
|
||||
- qcom,dc-current-limit:
|
||||
Usage: optional (default: 100mA, or pre-configured value)
|
||||
Value type: <u32>; uA; range [100mA : 2.5A]
|
||||
Description: Default DC charge current limit
|
||||
|
||||
- qcom,disable-dc:
|
||||
Usage: optional (default: false)
|
||||
Value type: boolean: <u32> or <empty>
|
||||
Description: Disable DC charger
|
||||
|
||||
- qcom,jeita-extended-temp-range:
|
||||
Usage: optional (default: false)
|
||||
Value type: boolean: <u32> or <empty>
|
||||
Description: Enable JEITA extended temperature range; This does *not*
|
||||
adjust the maximum charge voltage or current in the extended
|
||||
temperature range. It only allows charging when the battery
|
||||
is in the extended temperature range. Voltage/current
|
||||
regulation must be done externally to fully comply with
|
||||
the JEITA safety guidelines if this flag is set.
|
||||
|
||||
EXAMPLE
|
||||
charger@1000 {
|
||||
compatible = "qcom,pm8941-charger";
|
||||
reg = <0x1000 0x700>;
|
||||
interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
interrupt-names = "chg-done",
|
||||
"chg-fast",
|
||||
"chg-trkl",
|
||||
"bat-temp-ok",
|
||||
"bat-present",
|
||||
"chg-gone",
|
||||
"usb-valid",
|
||||
"dc-valid";
|
||||
|
||||
qcom,fast-charge-current-limit = <1000000>;
|
||||
qcom,dc-charge-current-limit = <1000000>;
|
||||
};
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
Qualcomm Shared Memory Manager binding
|
||||
|
||||
This binding describes the Qualcomm Shared Memory Manager, used to share data
|
||||
between various subsystems and OSes in Qualcomm platforms.
|
||||
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: must be:
|
||||
"qcom,smem"
|
||||
|
||||
- memory-region:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: handle to memory reservation for main SMEM memory region.
|
||||
|
||||
- qcom,rpm-msg-ram:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: handle to RPM message memory resource
|
||||
|
||||
- hwlocks:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: reference to a hwspinlock used to protect allocations from
|
||||
the shared memory
|
||||
|
||||
= EXAMPLE
|
||||
The following example shows the SMEM setup for MSM8974, with a main SMEM region
|
||||
at 0xfa00000 and the RPM message ram at 0xfc428000:
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
smem_region: smem@fa00000 {
|
||||
reg = <0xfa00000 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
smem@fa00000 {
|
||||
compatible = "qcom,smem";
|
||||
|
||||
memory-region = <&smem_region>;
|
||||
qcom,rpm-msg-ram = <&rpm_msg_ram>;
|
||||
|
||||
hwlocks = <&tcsr_mutex 3>;
|
||||
};
|
||||
|
||||
soc {
|
||||
rpm_msg_ram: memory@fc428000 {
|
||||
compatible = "qcom,rpm-msg-ram";
|
||||
reg = <0xfc428000 0x4000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,4 +1,6 @@
|
|||
#include "qcom-apq8064-v2.0.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
|
||||
/ {
|
||||
model = "CompuLab CM-QS600";
|
||||
|
|
@ -12,12 +14,27 @@
|
|||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
pwrseq {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
compatible = "simple-bus";
|
||||
|
||||
sdcc4_pwrseq: sdcc4_pwrseq {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_default_gpios>;
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
pinctrl@800000 {
|
||||
i2c1_pins: i2c1 {
|
||||
card_detect: card_detect {
|
||||
mux {
|
||||
pins = "gpio20", "gpio21";
|
||||
function = "gsbi1";
|
||||
pins = "gpio26";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -96,10 +113,8 @@
|
|||
i2c@12460000 {
|
||||
status = "okay";
|
||||
clock-frequency = <200000>;
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
eeprom: eeprom@50 {
|
||||
eeprom@50 {
|
||||
compatible = "24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
|
|
@ -112,6 +127,8 @@
|
|||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
serial@16640000 {
|
||||
status = "ok";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gsbi7_uart_2pins>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -163,6 +180,21 @@
|
|||
regulator-always-on;
|
||||
};
|
||||
|
||||
qcom,ssbi@500000 {
|
||||
pmic@0 {
|
||||
gpio@150 {
|
||||
wlan_default_gpios: wlan-gpios {
|
||||
pios {
|
||||
pins = "gpio43";
|
||||
function = "normal";
|
||||
bias-disable;
|
||||
power-source = <PM8921_GPIO_S4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
amba {
|
||||
/* eMMC */
|
||||
sdcc1: sdcc@12400000 {
|
||||
|
|
@ -175,12 +207,16 @@
|
|||
sdcc3: sdcc@12180000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&v3p3_fixed>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&card_detect>;
|
||||
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
/* WLAN */
|
||||
sdcc4: sdcc@121c0000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&v3p3_fixed>;
|
||||
vqmmc-supply = <&v3p3_fixed>;
|
||||
mmc-pwrseq = <&sdcc4_pwrseq>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,5 +1,6 @@
|
|||
#include "qcom-apq8064-v2.0.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Qualcomm APQ8064/IFC6410";
|
||||
|
|
@ -14,6 +15,29 @@
|
|||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
pwrseq {
|
||||
compatible = "simple-bus";
|
||||
|
||||
sdcc4_pwrseq: sdcc4_pwrseq {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_default_gpios>;
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <¬ify_led>;
|
||||
|
||||
led@1 {
|
||||
label = "apq8064:green:user1";
|
||||
gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
pinctrl@800000 {
|
||||
card_detect: card_detect {
|
||||
|
|
@ -119,8 +143,6 @@
|
|||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
i2c3: i2c@16280000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -131,10 +153,8 @@
|
|||
i2c@12460000 {
|
||||
status = "okay";
|
||||
clock-frequency = <200000>;
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
eeprom: eeprom@52 {
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x52>;
|
||||
pagesize = <32>;
|
||||
|
|
@ -148,9 +168,8 @@
|
|||
|
||||
serial@16540000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart_pins>;
|
||||
pinctrl-0 = <&gsbi6_uart_4pins>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -159,6 +178,8 @@
|
|||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
serial@16640000 {
|
||||
status = "ok";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gsbi7_uart_2pins>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -210,6 +231,30 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
qcom,ssbi@500000 {
|
||||
pmic@0 {
|
||||
gpio@150 {
|
||||
wlan_default_gpios: wlan-gpios {
|
||||
pios {
|
||||
pins = "gpio43";
|
||||
function = "normal";
|
||||
bias-disable;
|
||||
power-source = <PM8921_GPIO_S4>;
|
||||
};
|
||||
};
|
||||
|
||||
notify_led: nled {
|
||||
pios {
|
||||
pins = "gpio18";
|
||||
function = "normal";
|
||||
bias-disable;
|
||||
power-source = <PM8921_GPIO_S4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
amba {
|
||||
/* eMMC */
|
||||
sdcc1: sdcc@12400000 {
|
||||
|
|
@ -231,6 +276,7 @@
|
|||
status = "okay";
|
||||
vmmc-supply = <&ext_3p3v>;
|
||||
vqmmc-supply = <&pm8921_lvs1>;
|
||||
mmc-pwrseq = <&sdcc4_pwrseq>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -127,12 +127,33 @@
|
|||
};
|
||||
};
|
||||
|
||||
uart_pins: uart_pins {
|
||||
gsbi6_uart_2pins: gsbi6_uart_2pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15";
|
||||
function = "gsbi6";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi6_uart_4pins: gsbi6_uart_4pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15", "gpio16", "gpio17";
|
||||
function = "gsbi6";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi7_uart_2pins: gsbi7_uart_2pins {
|
||||
mux {
|
||||
pins = "gpio82", "gpio83";
|
||||
function = "gsbi7";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi7_uart_4pins: gsbi7_uart_4pins {
|
||||
mux {
|
||||
pins = "gpio82", "gpio83", "gpio84", "gpio85";
|
||||
function = "gsbi7";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
intc: interrupt-controller@2000000 {
|
||||
|
|
@ -213,6 +234,8 @@
|
|||
|
||||
i2c1: i2c@12460000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
reg = <0x12460000 0x1000>;
|
||||
interrupts = <0 194 IRQ_TYPE_NONE>;
|
||||
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
||||
|
|
@ -258,6 +281,8 @@
|
|||
ranges;
|
||||
i2c3: i2c@16280000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
pinctrl-names = "default";
|
||||
reg = <0x16280000 0x1000>;
|
||||
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
|
||||
clocks = <&gcc GSBI3_QUP_CLK>,
|
||||
|
|
@ -361,6 +386,22 @@
|
|||
<136 1>, <137 1>, <138 1>, <139 1>;
|
||||
};
|
||||
|
||||
rtc@11d {
|
||||
compatible = "qcom,pm8921-rtc";
|
||||
interrupt-parent = <&pmicintc>;
|
||||
interrupts = <39 1>;
|
||||
reg = <0x11d>;
|
||||
allow-set-time;
|
||||
};
|
||||
|
||||
pwrkey@1c {
|
||||
compatible = "qcom,pm8921-pwrkey";
|
||||
reg = <0x1c>;
|
||||
interrupt-parent = <&pmicintc>;
|
||||
interrupts = <50 1>, <51 1>;
|
||||
debounce = <15625>;
|
||||
pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -221,6 +221,7 @@
|
|||
compatible = "qcom,gcc-apq8084";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
reg = <0xfc400000 0x4000>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -114,6 +114,11 @@
|
|||
<0xf9002000 0x1000>;
|
||||
};
|
||||
|
||||
apcs: syscon@f9011000 {
|
||||
compatible = "syscon";
|
||||
reg = <0xf9011000 0x1000>;
|
||||
};
|
||||
|
||||
timer@f9020000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
@ -228,6 +233,7 @@
|
|||
compatible = "qcom,gcc-msm8974";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
reg = <0xfc400000 0x4000>;
|
||||
};
|
||||
|
||||
|
|
@ -240,6 +246,7 @@
|
|||
compatible = "qcom,mmcc-msm8974";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
reg = <0xfd8c0000 0x6000>;
|
||||
};
|
||||
|
||||
|
|
@ -308,7 +315,7 @@
|
|||
};
|
||||
|
||||
blsp_i2c11: i2c@f9967000 {
|
||||
status = "disable";
|
||||
status = "disabled";
|
||||
compatible = "qcom,i2c-qup-v2.1.1";
|
||||
reg = <0xf9967000 0x1000>;
|
||||
interrupts = <0 105 IRQ_TYPE_NONE>;
|
||||
|
|
@ -334,4 +341,73 @@
|
|||
#interrupt-cells = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
smd {
|
||||
compatible = "qcom,smd";
|
||||
|
||||
rpm {
|
||||
interrupts = <0 168 1>;
|
||||
qcom,ipc = <&apcs 8 0>;
|
||||
qcom,smd-edge = <15>;
|
||||
|
||||
rpm_requests {
|
||||
compatible = "qcom,rpm-msm8974";
|
||||
qcom,smd-channels = "rpm_requests";
|
||||
|
||||
pm8841-regulators {
|
||||
compatible = "qcom,rpm-pm8841-regulators";
|
||||
|
||||
pm8841_s1: s1 {};
|
||||
pm8841_s2: s2 {};
|
||||
pm8841_s3: s3 {};
|
||||
pm8841_s4: s4 {};
|
||||
pm8841_s5: s5 {};
|
||||
pm8841_s6: s6 {};
|
||||
pm8841_s7: s7 {};
|
||||
pm8841_s8: s8 {};
|
||||
};
|
||||
|
||||
pm8941-regulators {
|
||||
compatible = "qcom,rpm-pm8941-regulators";
|
||||
|
||||
pm8941_s1: s1 {};
|
||||
pm8941_s2: s2 {};
|
||||
pm8941_s3: s3 {};
|
||||
pm8941_5v: s4 {};
|
||||
|
||||
pm8941_l1: l1 {};
|
||||
pm8941_l2: l2 {};
|
||||
pm8941_l3: l3 {};
|
||||
pm8941_l4: l4 {};
|
||||
pm8941_l5: l5 {};
|
||||
pm8941_l6: l6 {};
|
||||
pm8941_l7: l7 {};
|
||||
pm8941_l8: l8 {};
|
||||
pm8941_l9: l9 {};
|
||||
pm8941_l10: l10 {};
|
||||
pm8941_l11: l11 {};
|
||||
pm8941_l12: l12 {};
|
||||
pm8941_l13: l13 {};
|
||||
pm8941_l14: l14 {};
|
||||
pm8941_l15: l15 {};
|
||||
pm8941_l16: l16 {};
|
||||
pm8941_l17: l17 {};
|
||||
pm8941_l18: l18 {};
|
||||
pm8941_l19: l19 {};
|
||||
pm8941_l20: l20 {};
|
||||
pm8941_l21: l21 {};
|
||||
pm8941_l22: l22 {};
|
||||
pm8941_l23: l23 {};
|
||||
pm8941_l24: l24 {};
|
||||
|
||||
pm8941_lvs1: lvs1 {};
|
||||
pm8941_lvs2: lvs2 {};
|
||||
pm8941_lvs3: lvs3 {};
|
||||
|
||||
pm8941_5vs1: 5vs1 {};
|
||||
pm8941_5vs2: 5vs2 {};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -26,6 +26,27 @@
|
|||
bias-pull-up;
|
||||
};
|
||||
|
||||
charger@1000 {
|
||||
compatible = "qcom,pm8941-charger";
|
||||
reg = <0x1000 0x700>;
|
||||
interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
interrupt-names = "chg-done",
|
||||
"chg-fast",
|
||||
"chg-trkl",
|
||||
"bat-temp-ok",
|
||||
"bat-present",
|
||||
"chg-gone",
|
||||
"usb-valid",
|
||||
"dc-valid";
|
||||
};
|
||||
|
||||
pm8941_gpios: gpios@c000 {
|
||||
compatible = "qcom,pm8941-gpio";
|
||||
reg = <0xc000 0x2400>;
|
||||
|
|
@ -120,8 +141,7 @@
|
|||
|
||||
pm8941_iadc: iadc@3600 {
|
||||
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
|
||||
reg = <0x3600 0x100>,
|
||||
<0x12f1 0x1>;
|
||||
reg = <0x3600 0x100>;
|
||||
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
qcom,external-resistor-micro-ohms = <10000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -99,6 +99,7 @@
|
|||
compatible = "qcom,gcc-msm8916";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
reg = <0x1800000 0x80000>;
|
||||
};
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче