microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Omapdss driver changes for 3.5 merge window. 

Lots of normal development commits, but perhaps most notable changes are:
 
 * HDMI rework to properly decouple the HDMI audio part from the HDMI video part.
 * Restructure omapdss core driver so that it's possible to implement device
   tree support. This included changing how platform data is passed to the
   drivers, changing display device registration and improving the panel driver's
   ability to configure the underlying video output interface.
 * Basic support for DSI packet interleaving
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPu2LWAAoJEPo9qoy8lh71bo0P/2iTw1WLHiRqOwwXSqOQHm2U
 EFzA4T36qS29h5g9yA1uHnRo2CO7UVL6kOFShk5vzpiBjwZ0e0nPPUxK919hyYEP
 vbrOq4dzdIx4+IYhlFusMKi1OR2JhbmOjE7gx3e1fNby7XxXY2TO2/i98lVKT0bi
 wcJN3cTtXcwZOjApxudIf0J4A/0YRzqGIumnkYKwZWqiW5Rv1+dfb5/Ml5fhYvsH
 IehLQZs8IHtCbM7qw1yDeVAnBUgsuLPCyep3W/zm1MEscboevifw50sFIRwG5GBQ
 cmid+Fi7u3R0/yv/UK2XBGFf7PbeZxWyM5nuZ5raajS/X0mxT1fkGcre1AxNzvgE
 3gjfS9m40WKLpod1hsbXZsX1ksCiBddvT5xkgoiyhfa2G2TDGnOEHmKE4sYuq7qF
 Zc2YuJMahb+iWrPN966Io4PpgscMEjP732b0tg03MtwgR+liajqiuMzA56PDHaTA
 bwwFNS3DVIoEpgeN778PWQJ1mRprlYnK7lyJvpGlrEnDh9tM0Xi/35QDlFl1hvAp
 ZKD9oSkK0cIvZB690J6pRoaVv0PfjHspxFDX28FICTQROV2lJ5P9JOwGi+Bk9FwD
 eBPchUsivnAuhVthp3YwFod5JyN5ZVSD+9Xe9dXUwstRJo9dJMYLY+E41+N4UUS9
 BS2/SKvWqc2NcmIgerO3
 =I8Se
 -----END PGP SIGNATURE-----

Merge tag 'omapdss-for-3.5' of git://github.com/tomba/linux into fbdev-next

Omapdss driver changes for 3.5 merge window.

Lots of normal development commits, but perhaps most notable changes are:

* HDMI rework to properly decouple the HDMI audio part from the HDMI video part.
* Restructure omapdss core driver so that it's possible to implement device
  tree support. This included changing how platform data is passed to the
  drivers, changing display device registration and improving the panel driver's
  ability to configure the underlying video output interface.
* Basic support for DSI packet interleaving
This commit is contained in:
Florian Tobias Schandinat 2012-05-27 20:58:20 +00:00
Родитель 5e7b911f9a e92a5b28f7
Коммит d85d135d8b
606 изменённых файлов: 7940 добавлений и 5735 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

14
Documentation/ABI/stable/sysfs-driver-usb-usbtmc
Просмотреть файл

@ -1,5 +1,5 @@
What: /sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
What: /sys/bus/usb/drivers/usbtmc/*/interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/*/device_capabilities
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
@ -12,8 +12,8 @@ Description:
The files are read only.
What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
What: /sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
@ -27,7 +27,7 @@ Description:
The files are read only.
What: /sys/bus/usb/drivers/usbtmc/devices/*/TermChar
What: /sys/bus/usb/drivers/usbtmc/*/TermChar
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
@ -40,7 +40,7 @@ Description:
sent to the device or not.
What: /sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
What: /sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
@ -51,7 +51,7 @@ Description:
published by the USB-IF.
What: /sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
What: /sys/bus/usb/drivers/usbtmc/*/auto_abort
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:

18
Documentation/ABI/testing/sysfs-block-rssd Normal file
Просмотреть файл

@ -0,0 +1,18 @@
What: /sys/block/rssd*/registers
Date: March 2012
KernelVersion: 3.3
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Dumps below driver information and
hardware registers.
- S ACTive
- Command Issue
- Allocated
- Completed
- PORT IRQ STAT
- HOST IRQ STAT
What: /sys/block/rssd*/status
Date: April 2012
KernelVersion: 3.4
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Indicates the status of the device.

8
Documentation/ABI/testing/sysfs-cfq-target-latency Normal file
Просмотреть файл

@ -0,0 +1,8 @@
What: /sys/block/<device>/iosched/target_latency
Date: March 2012
contact: Tao Ma <boyu.mt@taobao.com>
Description:
The /sys/block/<device>/iosched/target_latency only exists
when the user sets cfq to /sys/block/<device>/scheduler.
It contains an estimated latency time for the cfq. cfq will
use it to calculate the time slice used for every task.

2
Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
Просмотреть файл

@ -1,6 +1,6 @@
<refentry id="V4L2-PIX-FMT-NV12M">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>

2
Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
Просмотреть файл

@ -1,6 +1,6 @@
<refentry id="V4L2-PIX-FMT-YUV420M">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>

46
Documentation/arm/OMAP/DSS
Просмотреть файл

@ -47,6 +47,51 @@ flexible way to enable non-common multi-display configuration. In addition to
modelling the hardware overlays, omapdss supports virtual overlays and overlay
managers. These can be used when updating a display with CPU or system DMA.
omapdss driver support for audio
--------------------------------
There exist several display technologies and standards that support audio as
well. Hence, it is relevant to update the DSS device driver to provide an audio
interface that may be used by an audio driver or any other driver interested in
the functionality.
The audio_enable function is intended to prepare the relevant
IP for playback (e.g., enabling an audio FIFO, taking in/out of reset
some IP, enabling companion chips, etc). It is intended to be called before
audio_start. The audio_disable function performs the reverse operation and is
intended to be called after audio_stop.
While a given DSS device driver may support audio, it is possible that for
certain configurations audio is not supported (e.g., an HDMI display using a
VESA video timing). The audio_supported function is intended to query whether
the current configuration of the display supports audio.
The audio_config function is intended to configure all the relevant audio
parameters of the display. In order to make the function independent of any
specific DSS device driver, a struct omap_dss_audio is defined. Its purpose
is to contain all the required parameters for audio configuration. At the
moment, such structure contains pointers to IEC-60958 channel status word
and CEA-861 audio infoframe structures. This should be enough to support
HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958.
The audio_enable/disable, audio_config and audio_supported functions could be
implemented as functions that may sleep. Hence, they should not be called
while holding a spinlock or a readlock.
The audio_start/audio_stop function is intended to effectively start/stop audio
playback after the configuration has taken place. These functions are designed
to be used in an atomic context. Hence, audio_start should return quickly and be
called only after all the needed resources for audio playback (audio FIFOs,
DMA channels, companion chips, etc) have been enabled to begin data transfers.
audio_stop is designed to only stop the audio transfers. The resources used
for playback are released using audio_disable.
The enum omap_dss_audio_state may be used to help the implementations of
the interface to keep track of the audio state. The initial state is _DISABLED;
then, the state transitions to _CONFIGURED, and then, when it is ready to
play audio, to _ENABLED. The state _PLAYING is used when the audio is being
rendered.
Panel and controller drivers
----------------------------
@ -156,6 +201,7 @@ timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
"pal" and "ntsc"
panel_name
tear_elim Tearing elimination 0=off, 1=on
output_type Output type (video encoder only): "composite" or "svideo"
There are also some debugfs files at <debugfs>/omapdss/ which show information
about clocks and registers.

5
Documentation/cgroups/memory.txt
Просмотреть файл

@ -34,8 +34,7 @@ Current Status: linux-2.6.34-mmotm(development version of 2010/April)
Features:
- accounting anonymous pages, file caches, swap caches usage and limiting them.
- private LRU and reclaim routine. (system's global LRU and private LRU
work independently from each other)
- pages are linked to per-memcg LRU exclusively, and there is no global LRU.
- optionally, memory+swap usage can be accounted and limited.
- hierarchical accounting
- soft limit
@ -154,7 +153,7 @@ updated. page_cgroup has its own LRU on cgroup.
2.2.1 Accounting details
All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
Some pages which are never reclaimable and will not be on the global LRU
Some pages which are never reclaimable and will not be on the LRU
are not accounted. We just account pages under usual VM management.
RSS pages are accounted at page_fault unless they've already been accounted

8
Documentation/feature-removal-schedule.txt
Просмотреть файл

@ -531,3 +531,11 @@ Why: There appear to be no production users of the get_robust_list syscall,
of ASLR. It was only ever intended for debugging, so it should be
removed.
Who: Kees Cook <keescook@chromium.org>
----------------------------
What: setitimer accepts user NULL pointer (value)
When: 3.6
Why: setitimer is not returning -EFAULT if user pointer is NULL. This
violates the spec.
Who: Sasikantha Babu <sasikanth.v19@gmail.com>

2
Documentation/filesystems/vfs.txt
Просмотреть файл

@ -114,7 +114,7 @@ members are defined:
struct file_system_type {
const char *name;
int fs_flags;
struct dentry (*mount) (struct file_system_type *, int,
struct dentry *(*mount) (struct file_system_type *, int,
const char *, void *);
void (*kill_sb) (struct super_block *);
struct module *owner;

4
Documentation/sound/alsa/HD-Audio-Models.txt
Просмотреть файл

@ -43,7 +43,9 @@ ALC680
ALC882/883/885/888/889
======================
N/A
acer-aspire-4930g Acer Aspire 4930G/5930G/6530G/6930G/7730G
acer-aspire-8930g Acer Aspire 8330G/6935G
acer-aspire Acer Aspire others
ALC861/660
==========

22
Documentation/usb/URB.txt
Просмотреть файл

@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it
they will get a -EPERM error. Thus you can be sure that when
usb_kill_urb() returns, the URB is totally idle.
There is a lifetime issue to consider. An URB may complete at any
time, and the completion handler may free the URB. If this happens
while usb_unlink_urb or usb_kill_urb is running, it will cause a
memory-access violation. The driver is responsible for avoiding this,
which often means some sort of lock will be needed to prevent the URB
from being deallocated while it is still in use.
On the other hand, since usb_unlink_urb may end up calling the
completion handler, the handler must not take any lock that is held
when usb_unlink_urb is invoked. The general solution to this problem
is to increment the URB's reference count while holding the lock, then
drop the lock and call usb_unlink_urb or usb_kill_urb, and then
decrement the URB's reference count. You increment the reference
count by calling
struct urb *usb_get_urb(struct urb *urb)
(ignore the return value; it is the same as the argument) and
decrement the reference count by calling usb_free_urb. Of course,
none of this is necessary if there's no danger of the URB being freed
by the completion handler.
1.7. What about the completion handler?

6
Documentation/usb/usbmon.txt
Просмотреть файл

@ -183,10 +183,10 @@ An input control transfer to get a port status.
d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
to a storage device at address 5:
An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
Bulk wrapper to a storage device at address 5:
dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
* Raw binary format and API

25
MAINTAINERS
Просмотреть файл

@ -1521,8 +1521,8 @@ M: Gustavo Padovan <gustavo@padovan.org>
M: Johan Hedberg <johan.hedberg@gmail.com>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
S: Maintained
F: drivers/bluetooth/
@ -1532,8 +1532,8 @@ M: Gustavo Padovan <gustavo@padovan.org>
M: Johan Hedberg <johan.hedberg@gmail.com>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
S: Maintained
F: net/bluetooth/
F: include/net/bluetooth/
@ -2321,9 +2321,9 @@ S: Supported
F: drivers/acpi/dock.c
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
M: Rob Landley <rob@landley.net>
L: linux-doc@vger.kernel.org
T: quilt http://xenotime.net/kernel-doc-patches/current/
T: TBD
S: Maintained
F: Documentation/
@ -4533,8 +4533,7 @@ S: Supported
F: drivers/net/ethernet/myricom/myri10ge/
NATSEMI ETHERNET DRIVER (DP8381x)
M: Tim Hockin <thockin@hockin.org>
S: Maintained
S: Orphan
F: drivers/net/ethernet/natsemi/natsemi.c
NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
@ -4803,6 +4802,7 @@ F: arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
F: arch/arm/mach-omap2/clockdomain44xx.c
OMAP AUDIO SUPPORT
M: Peter Ujfalusi <peter.ujfalusi@ti.com>
M: Jarkko Nikula <jarkko.nikula@bitmer.com>
L: alsa-devel@alsa-project.org (subscribers-only)
L: linux-omap@vger.kernel.org
@ -5117,6 +5117,11 @@ F: drivers/i2c/busses/i2c-pca-*
F: include/linux/i2c-algo-pca.h
F: include/linux/i2c-pca-platform.h
PCDP - PRIMARY CONSOLE AND DEBUG PORT
M: Khalid Aziz <khalid.aziz@hp.com>
S: Maintained
F: drivers/firmware/pcdp.*
PCI ERROR RECOVERY
M: Linas Vepstas <linasvepstas@gmail.com>
L: linux-pci@vger.kernel.org
@ -6466,6 +6471,7 @@ S: Odd Fixes
F: drivers/staging/olpc_dcon/
STAGING - OZMO DEVICES USB OVER WIFI DRIVER
M: Rupesh Gujare <rgujare@ozmodevices.com>
M: Chris Kelly <ckelly@ozmodevices.com>
S: Maintained
F: drivers/staging/ozwpan/
@ -7461,8 +7467,7 @@ F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS DRIVERS
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
M: Ian Lartey <ian@opensource.wolfsonmicro.com>
M: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
L: patches@opensource.wolfsonmicro.com
T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices

2
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 4
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

68
arch/alpha/include/asm/atomic.h
Просмотреть файл

@ -3,6 +3,7 @@
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/cmpxchg.h>
/*
* Atomic operations that C can't guarantee us. Useful for
@ -168,73 +169,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
return result;
}
/*
* Atomic exchange routines.
*/
#define __ASM__MB
#define ____xchg(type, args...) __xchg ## type ## _local(args)
#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args)
#include <asm/xchg.h>
#define xchg_local(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \
(unsigned long)_n_, \
sizeof(*(ptr))); \
})
#define cmpxchg64_local(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg_local((ptr), (o), (n)); \
})
#ifdef CONFIG_SMP
#undef __ASM__MB
#define __ASM__MB "\tmb\n"
#endif
#undef ____xchg
#undef ____cmpxchg
#define ____xchg(type, args...) __xchg ##type(args)
#define ____cmpxchg(type, args...) __cmpxchg ##type(args)
#include <asm/xchg.h>
#define xchg(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr)));\
})
#define cmpxchg64(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg((ptr), (o), (n)); \
})
#undef __ASM__MB
#undef ____cmpxchg
#define __HAVE_ARCH_CMPXCHG 1
#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))

71
arch/alpha/include/asm/cmpxchg.h Normal file
Просмотреть файл

@ -0,0 +1,71 @@
#ifndef _ALPHA_CMPXCHG_H
#define _ALPHA_CMPXCHG_H
/*
* Atomic exchange routines.
*/
#define __ASM__MB
#define ____xchg(type, args...) __xchg ## type ## _local(args)
#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args)
#include <asm/xchg.h>
#define xchg_local(ptr, x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \
(unsigned long)_n_, \
sizeof(*(ptr))); \
})
#define cmpxchg64_local(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg_local((ptr), (o), (n)); \
})
#ifdef CONFIG_SMP
#undef __ASM__MB
#define __ASM__MB "\tmb\n"
#endif
#undef ____xchg
#undef ____cmpxchg
#define ____xchg(type, args...) __xchg ##type(args)
#define ____cmpxchg(type, args...) __cmpxchg ##type(args)
#include <asm/xchg.h>
#define xchg(ptr, x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr)));\
})
#define cmpxchg64(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg((ptr), (o), (n)); \
})
#undef __ASM__MB
#undef ____cmpxchg
#define __HAVE_ARCH_CMPXCHG 1
#endif /* _ALPHA_CMPXCHG_H */

4
arch/alpha/include/asm/xchg.h
Просмотреть файл

@ -1,10 +1,10 @@
#ifndef _ALPHA_ATOMIC_H
#ifndef _ALPHA_CMPXCHG_H
#error Do not include xchg.h directly!
#else
/*
* xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
* except that local version do not have the expensive memory barrier.
* So this file is included twice from asm/system.h.
* So this file is included twice from asm/cmpxchg.h.
*/
/*

2
arch/arm/boot/compressed/atags_to_fdt.c
Просмотреть файл

@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
} else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
continue;
mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
} else if (atag->hdr.tag == ATAG_INITRD2) {

2
arch/arm/boot/compressed/head.S
Просмотреть файл

@ -273,7 +273,7 @@ restart: adr r0, LC0
add r0, r0, #0x100
mov r1, r6
sub r2, sp, r6
blne atags_to_fdt
bleq atags_to_fdt
ldmfd sp!, {r0-r3, ip, lr}
sub sp, sp, #0x10000

1
arch/arm/boot/dts/at91sam9g20.dtsi
Просмотреть файл

@ -55,7 +55,6 @@
#interrupt-cells = <2>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
reg = <0xfffff000 0x200>;
};

1
arch/arm/boot/dts/at91sam9g45.dtsi
Просмотреть файл

@ -56,7 +56,6 @@
#interrupt-cells = <2>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
reg = <0xfffff000 0x200>;
};

1
arch/arm/boot/dts/at91sam9x5.dtsi
Просмотреть файл

@ -54,7 +54,6 @@
#interrupt-cells = <2>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
reg = <0xfffff000 0x200>;
};

1
arch/arm/boot/dts/db8500.dtsi
Просмотреть файл

@ -24,7 +24,6 @@
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
interrupt-parent;
reg = <0xa0411000 0x1000>,
<0xa0410100 0x100>;
};

1
arch/arm/boot/dts/highbank.dts
Просмотреть файл

@ -89,7 +89,6 @@
#size-cells = <0>;
#address-cells = <1>;
interrupt-controller;
interrupt-parent;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};

9
arch/arm/common/vic.c
Просмотреть файл

@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
/*
* Handle each interrupt in a single VIC. Returns non-zero if we've
* handled at least one interrupt. This does a single read of the
* status register and handles all interrupts in order from LSB first.
* handled at least one interrupt. This reads the status register
* before handling each interrupt, which is necessary given that
* handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
*/
static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
{
u32 stat, irq;
int handled = 0;
stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
while (stat) {
while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
irq = ffs(stat) - 1;
handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
stat &= ~(1 << irq);
handled = 1;
}

1
arch/arm/configs/imx_v4_v5_defconfig
Просмотреть файл

@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_MFD_MC13XXX=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_FB=y

9
arch/arm/configs/u8500_defconfig
Просмотреть файл

@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
@ -39,7 +37,6 @@ CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_I2C=y
CONFIG_I2C_NOMADIK=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_POWER_SUPPLY=y
CONFIG_AB8500_BM=y
CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y

2
arch/arm/include/asm/jump_label.h
Просмотреть файл

@ -14,7 +14,7 @@
#define JUMP_LABEL_NOP "nop"
#endif
static __always_inline bool arch_static_branch(struct jump_label_key *key)
static __always_inline bool arch_static_branch(struct static_key *key)
{
asm goto("1:\n\t"
JUMP_LABEL_NOP "\n\t"

14
arch/arm/kernel/setup.c
Просмотреть файл

@ -523,6 +523,20 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size)
*/
size -= start & ~PAGE_MASK;
bank->start = PAGE_ALIGN(start);
#ifndef CONFIG_LPAE
if (bank->start + size < bank->start) {
printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
"32-bit physical address space\n", (long long)start);
/*
* To ensure bank->start + bank->size is representable in
* 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
* This means we lose a page after masking.
*/
size = ULONG_MAX - bank->start;
}
#endif
bank->size = size & PAGE_MASK;
/*

6
arch/arm/kernel/smp_twd.c
Просмотреть файл

@ -118,10 +118,14 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
* The twd clock events must be reprogrammed to account for the new
* frequency. The timer is local to a cpu, so cross-call to the
* changing cpu.
*
* Only wait for it to finish, if the cpu is active to avoid
* deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
* booting of that cpu.
*/
if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
smp_call_function_single(freqs->cpu, twd_update_frequency,
NULL, 1);
NULL, cpu_active(freqs->cpu));
return NOTIFY_OK;
}

1
arch/arm/mach-at91/at91rm9200_devices.c
Просмотреть файл

@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}

2
arch/arm/mach-at91/at91rm9200_time.c
Просмотреть файл

@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <asm/mach/time.h>
@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
};
void __iomem *at91_st_base;
EXPORT_SYMBOL_GPL(at91_st_base);
void __init at91rm9200_ioremap_st(u32 addr)
{

2
arch/arm/mach-at91/board-rm9200ek.c
Просмотреть файл

@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
};
#define EK_FLASH_BASE AT91_CHIPSELECT_0
#define EK_FLASH_SIZE SZ_2M
#define EK_FLASH_SIZE SZ_8M
static struct physmap_flash_data ek_flash_data = {
.width = 2,

5
arch/arm/mach-at91/board-sam9261ek.c
Просмотреть файл

@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = {
.flags = IORESOURCE_MEM
},
[2] = {
.start = AT91_PIN_PC11,
.end = AT91_PIN_PC11,
.flags = IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
}
@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
static void __init ek_add_device_dm9000(void)
{
struct resource *r = &dm9000_resource[2];
/* Configure chip-select 2 (DM9000) */
sam9_smc_configure(0, 2, &dm9000_smc_config);
@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void)
/* Configure Interrupt pin as input, no pull-up */
at91_set_gpio_input(AT91_PIN_PC11, 0);
r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
platform_device_register(&dm9000_device);
}
#else

1
arch/arm/mach-at91/clock.c
Просмотреть файл

@ -35,6 +35,7 @@
#include "generic.h"
void __iomem *at91_pmc_base;
EXPORT_SYMBOL_GPL(at91_pmc_base);
/*
* There's a lot more which can be done with clocks, including cpufreq

2
arch/arm/mach-at91/include/mach/at91_pmc.h
Просмотреть файл

@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
#define at91_pmc_write(field, value) \
__raw_writel(value, at91_pmc_base + field)
#else
.extern at91_aic_base
.extern at91_pmc_base
#endif
#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */

2
arch/arm/mach-at91/setup.c
Просмотреть файл

@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
}
void __iomem *at91_ramc_base[2];
EXPORT_SYMBOL_GPL(at91_ramc_base);
void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
{
@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
}
void __iomem *at91_matrix_base;
EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{

4
arch/arm/mach-bcmring/core.c
Просмотреть файл

@ -52,8 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
static struct clk pll1_clk = {
.name = "PLL1",

2
arch/arm/mach-exynos/Kconfig
Просмотреть файл

@ -368,6 +368,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select CPU_EXYNOS4210
select USE_OF
select ARM_AMBA
@ -380,6 +381,7 @@ config MACH_EXYNOS4_DT
config MACH_EXYNOS5_DT
bool "SAMSUNG EXYNOS5 Machine using device tree"
depends on ARCH_EXYNOS5
select SOC_EXYNOS5250
select USE_OF
select ARM_AMBA

2
arch/arm/mach-exynos/include/mach/irqs.h
Просмотреть файл

@ -212,6 +212,8 @@
#define IRQ_MFC EXYNOS4_IRQ_MFC
#define IRQ_SDO EXYNOS4_IRQ_SDO
#define IRQ_I2S0 EXYNOS4_IRQ_I2S0
#define IRQ_ADC EXYNOS4_IRQ_ADC0
#define IRQ_TC EXYNOS4_IRQ_PEN0

4
arch/arm/mach-exynos/include/mach/map.h
Просмотреть файл

@ -89,6 +89,10 @@
#define EXYNOS4_PA_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS5_PA_MDMA0 0x10800000
#define EXYNOS5_PA_MDMA1 0x11C10000
#define EXYNOS5_PA_PDMA0 0x121A0000
#define EXYNOS5_PA_PDMA1 0x121B0000
#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000

6
arch/arm/mach-exynos/include/mach/regs-clock.h
Просмотреть файл

@ -255,9 +255,15 @@
/* For EXYNOS5250 */
#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000)
#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100)
#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200)
#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400)
#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500)
#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504)
#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600)
#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604)
#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100)
#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204)

2
arch/arm/mach-exynos/mach-exynos5-dt.c
Просмотреть файл

@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
"exynos4210-uart.3", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
{},
};

46
arch/arm/mach-exynos/mach-nuri.c
Просмотреть файл

@ -311,49 +311,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
};
/* TSP */
static u8 mxt_init_vals[] = {
/* MXT_GEN_COMMAND(6) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_GEN_POWER(7) */
0x20, 0xff, 0x32,
/* MXT_GEN_ACQUIRE(8) */
0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
/* MXT_TOUCH_MULTI(9) */
0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00,
/* MXT_TOUCH_KEYARRAY(15) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
0x00,
/* MXT_SPT_GPIOPWM(19) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_PROCI_GRIPFACE(20) */
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
0x0f, 0x0a,
/* MXT_PROCG_NOISE(22) */
0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
/* MXT_TOUCH_PROXIMITY(23) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_PROCI_ONETOUCH(24) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_SPT_SELFTEST(25) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
/* MXT_PROCI_TWOTOUCH(27) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_SPT_CTECONFIG(28) */
0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
};
static struct mxt_platform_data mxt_platform_data = {
.config = mxt_init_vals,
.config_length = ARRAY_SIZE(mxt_init_vals),
.x_line = 18,
.y_line = 11,
.x_size = 1024,
@ -575,7 +533,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = {
static struct regulator_init_data __initdata max8997_ldo8_data = {
.constraints = {
.name = "VUSB/VDAC_3.3V_C210",
.name = "VUSB+VDAC_3.3V_C210",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@ -1351,6 +1309,7 @@ static struct platform_device *nuri_devices[] __initdata = {
static void __init nuri_map_io(void)
{
clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
@ -1383,7 +1342,6 @@ static void __init nuri_machine_init(void)
nuri_camera_init();
nuri_ehci_init();
clk_xusbxti.rate = 24000000;
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));

2
arch/arm/mach-exynos/mach-universal_c210.c
Просмотреть файл

@ -29,6 +29,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
@ -1061,6 +1062,7 @@ static struct platform_device *universal_devices[] __initdata = {
static void __init universal_map_io(void)
{
clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));

6
arch/arm/mach-imx/imx27-dt.c
Просмотреть файл

@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
static int __init imx27_avic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
return 0;
}
@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np,
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
irq_domain_add_simple(np, gpio_irq_base);
gpio_irq_base -= 32;
irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
NULL);
return 0;
}

2
arch/arm/mach-imx/mm-imx5.c
Просмотреть файл

@ -35,7 +35,7 @@ static void imx5_idle(void)
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
if (tzic_enable_wake() != 0)
if (!tzic_enable_wake())
cpu_do_idle();
clk_disable(gpc_dvfs_clk);
}

3
arch/arm/mach-msm/board-halibut.c
Просмотреть файл

@ -86,9 +86,6 @@ static void __init halibut_init(void)
static void __init halibut_fixup(struct tag *tags, char **cmdline,
struct meminfo *mi)
{
mi->nr_banks=1;
mi->bank[0].start = PHYS_OFFSET;
mi->bank[0].size = (101*1024*1024);
}
static void __init halibut_map_io(void)

1
arch/arm/mach-msm/board-trout-panel.c
Просмотреть файл

@ -12,6 +12,7 @@
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/system_info.h>
#include <mach/msm_fb.h>
#include <mach/vreg.h>

1
arch/arm/mach-msm/board-trout.c
Просмотреть файл

@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/clkdev.h>
#include <asm/system_info.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

2
arch/arm/mach-msm/proc_comm.c
Просмотреть файл

@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
* and unknown state. This function should be called early to
* wait on the ARM9.
*/
void __init proc_comm_boot_wait(void)
void __devinit proc_comm_boot_wait(void)
{
void __iomem *base = MSM_SHARED_RAM_BASE;

1
arch/arm/mach-omap1/mux.c
Просмотреть файл

@ -27,6 +27,7 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <plat/mux.h>

4
arch/arm/mach-omap1/timer.c
Просмотреть файл

@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
int n = (pdev->id - 1) << 1;
u32 l;
l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
__raw_writel(l, MOD_CONF_CTRL_1);
omap_writel(l, MOD_CONF_CTRL_1);
return 0;
}

38
arch/arm/mach-omap2/board-3430sdp.c
Просмотреть файл

@ -37,7 +37,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc-smc91x.h>
@ -113,9 +113,6 @@ static struct gpio sdp3430_dss_gpios[] __initdata = {
{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
};
static int lcd_enabled;
static int dvi_enabled;
static void __init sdp3430_display_init(void)
{
int r;
@ -129,44 +126,18 @@ static void __init sdp3430_display_init(void)
static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
{
if (dvi_enabled) {
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
return -EINVAL;
}
gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
lcd_enabled = 1;
return 0;
}
static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
{
lcd_enabled = 0;
gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
}
static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
dvi_enabled = 1;
return 0;
}
static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
{
dvi_enabled = 0;
}
static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
@ -186,15 +157,14 @@ static struct omap_dss_device sdp3430_lcd_device = {
.platform_disable = sdp3430_panel_disable_lcd,
};
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
};
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};

49
arch/arm/mach-omap2/board-4430sdp.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/usb/otg.h>
#include <linux/spi/spi.h>
#include <linux/i2c/twl.h>
#include <linux/mfd/twl6040.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = {
},
};
static struct twl4030_codec_data twl6040_codec = {
static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = {
.hf_right_step = 0x1d,
};
static struct twl4030_vibra_data twl6040_vibra = {
static struct twl6040_vibra_data twl6040_vibra = {
.vibldrv_res = 8,
.vibrdrv_res = 3,
.viblmotor_res = 10,
@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = {
.vddvibr_uV = 0, /* fixed volt supply - VBAT */
};
static struct twl4030_audio_data twl6040_audio = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.vibra = &twl6040_vibra,
.audpwron_gpio = 127,
.naudint_irq = OMAP44XX_IRQ_SYS_2N,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
.audio = &twl6040_audio,
/* Regulators */
.vusim = &sdp4430_vusim,
.vaux1 = &sdp4430_vaux1,
@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void)
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap4_pmic_init("twl6030", &sdp4430_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
@ -666,6 +666,10 @@ static struct nokia_dsi_panel_data dsi1_panel = {
.use_ext_te = false,
.ext_te_gpio = 101,
.esd_interval = 0,
.pin_config = {
.num_pins = 6,
.pins = { 0, 1, 2, 3, 4, 5 },
},
};
static struct omap_dss_device sdp4430_lcd_device = {
@ -674,13 +678,6 @@ static struct omap_dss_device sdp4430_lcd_device = {
.type = OMAP_DISPLAY_TYPE_DSI,
.data = &dsi1_panel,
.phy.dsi = {
.clk_lane = 1,
.clk_pol = 0,
.data1_lane = 2,
.data1_pol = 0,
.data2_lane = 3,
.data2_pol = 0,
.module = 0,
},
@ -715,6 +712,10 @@ static struct nokia_dsi_panel_data dsi2_panel = {
.use_ext_te = false,
.ext_te_gpio = 103,
.esd_interval = 0,
.pin_config = {
.num_pins = 6,
.pins = { 0, 1, 2, 3, 4, 5 },
},
};
static struct omap_dss_device sdp4430_lcd2_device = {
@ -723,12 +724,6 @@ static struct omap_dss_device sdp4430_lcd2_device = {
.type = OMAP_DISPLAY_TYPE_DSI,
.data = &dsi2_panel,
.phy.dsi = {
.clk_lane = 1,
.clk_pol = 0,
.data1_lane = 2,
.data1_pol = 0,
.data2_lane = 3,
.data2_pol = 0,
.module = 1,
},
@ -758,21 +753,6 @@ static struct omap_dss_device sdp4430_lcd2_device = {
.channel = OMAP_DSS_CHANNEL_LCD2,
};
static void sdp4430_lcd_init(void)
{
int r;
r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
"lcd1_reset_gpio");
if (r)
pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
"lcd2_reset_gpio");
if (r)
pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
}
static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
.hpd_gpio = HDMI_GPIO_HPD,
};
@ -858,7 +838,6 @@ static void __init omap_4430sdp_display_init(void)
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
sdp4430_lcd_init();
sdp4430_picodlp_init();
omap_display_init(&sdp4430_dss_data);
/*

25
arch/arm/mach-omap2/board-am3517evm.c
Просмотреть файл

@ -37,7 +37,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include "am35xx-emac.h"
#include "mux.h"
@ -207,31 +207,14 @@ static struct omap_dss_device am3517_evm_tv_device = {
.platform_disable = am3517_evm_panel_disable_tv,
};
static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
dvi_enabled = 1;
return 0;
}
static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
{
dvi_enabled = 0;
}
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
};
static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};

30
arch/arm/mach-omap2/board-cm-t35.c
Просмотреть файл

@ -44,7 +44,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/mcspi.h>
#include <mach/hardware.h>
@ -218,25 +218,6 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
gpio_set_value(CM_T35_LCD_EN_GPIO, 0);
}
static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
gpio_set_value(CM_T35_DVI_EN_GPIO, 0);
dvi_enabled = 1;
return 0;
}
static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value(CM_T35_DVI_EN_GPIO, 1);
dvi_enabled = 0;
}
static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
@ -260,15 +241,14 @@ static struct omap_dss_device cm_t35_lcd_device = {
.phy.dpi.data_lines = 18,
};
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = CM_T35_DVI_EN_GPIO,
};
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@ -316,7 +296,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
static struct gpio cm_t35_dss_gpios[] __initdata = {
{ CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" },
{ CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" },
{ CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" },
};
static void __init cm_t35_init_display(void)
@ -335,7 +314,6 @@ static void __init cm_t35_init_display(void)
gpio_export(CM_T35_LCD_EN_GPIO, 0);
gpio_export(CM_T35_LCD_BL_GPIO, 0);
gpio_export(CM_T35_DVI_EN_GPIO, 0);
msleep(50);
gpio_set_value(CM_T35_LCD_EN_GPIO, 1);

30
arch/arm/mach-omap2/board-devkit8000.c
Просмотреть файл

@ -47,7 +47,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@ -118,19 +118,6 @@ static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
}
static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@ -154,15 +141,14 @@ static struct omap_dss_device devkit8000_lcd_device = {
.phy.dpi.data_lines = 24,
};
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
};
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@ -244,13 +230,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
}
/* gpio + 7 is "DVI_PD" (out, active low) */
devkit8000_dvi_device.reset_gpio = gpio + 7;
ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
GPIOF_OUT_INIT_LOW, "DVI PowerDown");
if (ret < 0) {
devkit8000_dvi_device.reset_gpio = -EINVAL;
printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
}
dvi_panel.power_down_gpio = gpio + 7;
return 0;
}

2
arch/arm/mach-omap2/board-generic.c
Просмотреть файл

@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
static void __init omap4_i2c_init(void)
{
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
}
static void __init omap4_init(void)

30
arch/arm/mach-omap2/board-igep0020.c
Просмотреть файл

@ -32,7 +32,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/onenand.h>
#include "mux.h"
@ -444,28 +444,15 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.setup = igep_twl_gpio_setup,
};
static int igep2_enable_dvi(struct omap_dss_device *dssdev)
{
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
return 0;
}
static void igep2_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
}
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = IGEP2_GPIO_DVI_PUP,
};
static struct omap_dss_device igep2_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@ -480,14 +467,6 @@ static struct omap_dss_board_info igep2_dss_data = {
.default_device = &igep2_dvi_device,
};
static void __init igep2_display_init(void)
{
int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
"GPIO_DVI_PUP");
if (err)
pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
}
static struct platform_device *igep_devices[] __initdata = {
&igep_vwlan_device,
};
@ -668,7 +647,6 @@ static void __init igep_init(void)
if (machine_is_igep0020()) {
omap_display_init(&igep2_dss_data);
igep2_display_init();
igep2_init_smsc911x();
usbhs_init(&igep2_usbhs_bdata);
} else {

37
arch/arm/mach-omap2/board-omap3beagle.c
Просмотреть файл

@ -42,7 +42,7 @@
#include <plat/board.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@ -189,33 +189,17 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
/* DSS */
static int beagle_enable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value(dssdev->reset_gpio, 1);
return 0;
}
static void beagle_disable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value(dssdev->reset_gpio, 0);
}
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = -1,
};
static struct omap_dss_device beagle_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL,
};
static struct omap_dss_device beagle_tv_device = {
@ -236,16 +220,6 @@ static struct omap_dss_board_info beagle_dss_data = {
.default_device = &beagle_dvi_device,
};
static void __init beagle_display_init(void)
{
int r;
r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW,
"DVI reset");
if (r < 0)
printk(KERN_ERR "Unable to get DVI reset GPIO\n");
}
#include "sdram-micron-mt46h32m32lf-6.h"
static struct omap2_hsmmc_info mmc[] = {
@ -309,7 +283,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
dvi_panel.power_down_gpio = beagle_config.reset_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
@ -552,7 +526,6 @@ static void __init omap3_beagle_init(void)
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
beagle_display_init();
beagle_opp_init();
}

29
arch/arm/mach-omap2/board-omap3evm.c
Просмотреть файл

@ -46,7 +46,7 @@
#include "common.h"
#include <plat/mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@ -219,35 +219,14 @@ static struct omap_dss_device omap3_evm_tv_device = {
.platform_disable = omap3_evm_disable_tv,
};
static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
dvi_enabled = 1;
return 0;
}
static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
dvi_enabled = 0;
}
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO,
};
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};

29
arch/arm/mach-omap2/board-omap3stalker.c
Просмотреть файл

@ -42,7 +42,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@ -92,9 +92,6 @@ static inline void __init omap3stalker_init_eth(void)
#define LCD_PANEL_BKLIGHT_GPIO 210
#define ENABLE_VPLL2_DEV_GRP 0xE0
static int lcd_enabled;
static int dvi_enabled;
static void __init omap3_stalker_display_init(void)
{
return;
@ -122,32 +119,14 @@ static struct omap_dss_device omap3_stalker_tv_device = {
.platform_disable = omap3_stalker_disable_tv,
};
static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
gpio_set_value(DSS_ENABLE_GPIO, 1);
dvi_enabled = 1;
return 0;
}
static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value(DSS_ENABLE_GPIO, 0);
dvi_enabled = 0;
}
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = DSS_ENABLE_GPIO,
};
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};

50
arch/arm/mach-omap2/board-omap4panda.c
Просмотреть файл

@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl.h>
#include <linux/mfd/twl6040.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
@ -41,7 +42,7 @@
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include "hsmmc.h"
#include "control.h"
@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
return 0;
}
static struct twl4030_codec_data twl6040_codec = {
static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = {
.hf_right_step = 0x1d,
};
static struct twl4030_audio_data twl6040_audio = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
.naudint_irq = OMAP44XX_IRQ_SYS_2N,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata = {
.audio = &twl6040_audio,
};
static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void)
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap4_pmic_init("twl6030", &omap4_panda_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
@ -421,46 +420,22 @@ static struct omap_board_mux board_mux[] __initdata = {
/* Display DVI */
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value(dssdev->reset_gpio, 1);
return 0;
}
static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value(dssdev->reset_gpio, 0);
}
/* Using generic display panel */
static struct panel_dvi_platform_data omap4_dvi_panel = {
.platform_enable = omap4_panda_enable_dvi,
.platform_disable = omap4_panda_disable_dvi,
static struct tfp410_platform_data omap4_dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
};
struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
.channel = OMAP_DSS_CHANNEL_LCD2,
};
int __init omap4_panda_dvi_init(void)
{
int r;
/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
GPIOF_OUT_INIT_LOW, "DVI PD");
if (r)
pr_err("Failed to get DVI powerdown GPIO\n");
return r;
}
static struct gpio panda_hdmi_gpios[] = {
{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
@ -512,11 +487,6 @@ static struct omap_dss_board_info omap4_panda_dss_data = {
void __init omap4_panda_display_init(void)
{
int r;
r = omap4_panda_dvi_init();
if (r)
pr_err("error initializing panda DVI\n");
omap_display_init(&omap4_panda_dss_data);

25
arch/arm/mach-omap2/board-overo.c
Просмотреть файл

@ -46,7 +46,7 @@
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
@ -167,32 +167,15 @@ static void __init overo_display_init(void)
gpio_export(OVERO_GPIO_LCD_BL, 0);
}
static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
dvi_enabled = 1;
return 0;
}
static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
{
dvi_enabled = 0;
}
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = overo_panel_enable_dvi,
.platform_disable = overo_panel_disable_dvi,
static struct tfp410_platform_data dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = -1,
};
static struct omap_dss_device overo_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};

80
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
Просмотреть файл

@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
return 0;
}
#ifdef CONFIG_CPU_FREQ
/*
* Walk PRCM rate table and fillout cpufreq freq_table
* XXX This should be replaced by an OPP layer in the near future
*/
static struct cpufreq_frequency_table *freq_table;
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
const struct prcm_config *prcm;
int i = 0;
int tbl_sz = 0;
if (!cpu_is_omap24xx())
return;
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sclk->rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
tbl_sz++;
}
/*
* XXX Ensure that we're doing what CPUFreq expects for this error
* case and the following one
*/
if (tbl_sz == 0) {
pr_warning("%s: no matching entries in rate_table\n",
__func__);
return;
}
/* Include the CPUFREQ_TABLE_END terminator entry */
tbl_sz++;
freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
GFP_ATOMIC);
if (!freq_table) {
pr_err("%s: could not kzalloc frequency table\n", __func__);
return;
}
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sclk->rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
freq_table[i].index = i;
freq_table[i].frequency = prcm->mpu_speed / 1000;
i++;
}
freq_table[i].index = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
*table = &freq_table[0];
}
void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
{
if (!cpu_is_omap24xx())
return;
kfree(freq_table);
}
#endif

5
arch/arm/mach-omap2/clock.c
Просмотреть файл

@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = {
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
#ifdef CONFIG_CPU_FREQ
/* These will be removed when the OPP code is integrated */
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
.clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
#endif
};

8
arch/arm/mach-omap2/clock.h
Просмотреть файл

@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#else
#define omap2_clk_init_cpufreq_table 0
#define omap2_clk_exit_cpufreq_table 0
#endif
extern const struct clkops clkops_omap2_iclk_dflt_wait;
extern const struct clkops clkops_omap2_iclk_dflt;
extern const struct clkops clkops_omap2_iclk_idle_only;

190
arch/arm/mach-omap2/display.c
Просмотреть файл

@ -180,16 +180,133 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
omap4_dsi_mux_pads(dsi_id, 0);
}
static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
{
return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput);
}
static struct platform_device *create_dss_pdev(const char *pdev_name,
int pdev_id, const char *oh_name, void *pdata, int pdata_len,
struct platform_device *parent)
{
struct platform_device *pdev;
struct omap_device *od;
struct omap_hwmod *ohs[1];
struct omap_hwmod *oh;
int r;
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
r = -ENODEV;
goto err;
}
pdev = platform_device_alloc(pdev_name, pdev_id);
if (!pdev) {
pr_err("Could not create pdev for %s\n", pdev_name);
r = -ENOMEM;
goto err;
}
if (parent != NULL)
pdev->dev.parent = &parent->dev;
if (pdev->id != -1)
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
else
dev_set_name(&pdev->dev, "%s", pdev->name);
ohs[0] = oh;
od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
if (!od) {
pr_err("Could not alloc omap_device for %s\n", pdev_name);
r = -ENOMEM;
goto err;
}
r = platform_device_add_data(pdev, pdata, pdata_len);
if (r) {
pr_err("Could not set pdata for %s\n", pdev_name);
goto err;
}
r = omap_device_register(pdev);
if (r) {
pr_err("Could not register omap_device for %s\n", pdev_name);
goto err;
}
return pdev;
err:
return ERR_PTR(r);
}
static struct platform_device *create_simple_dss_pdev(const char *pdev_name,
int pdev_id, void *pdata, int pdata_len,
struct platform_device *parent)
{
struct platform_device *pdev;
int r;
pdev = platform_device_alloc(pdev_name, pdev_id);
if (!pdev) {
pr_err("Could not create pdev for %s\n", pdev_name);
r = -ENOMEM;
goto err;
}
if (parent != NULL)
pdev->dev.parent = &parent->dev;
if (pdev->id != -1)
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
else
dev_set_name(&pdev->dev, "%s", pdev->name);
r = platform_device_add_data(pdev, pdata, pdata_len);
if (r) {
pr_err("Could not set pdata for %s\n", pdev_name);
goto err;
}
r = omap_device_register(pdev);
if (r) {
pr_err("Could not register omap_device for %s\n", pdev_name);
goto err;
}
return pdev;
err:
return ERR_PTR(r);
}
int __init omap_display_init(struct omap_dss_board_info *board_data)
{
int r = 0;
struct omap_hwmod *oh;
struct platform_device *pdev;
int i, oh_count;
struct omap_display_platform_data pdata;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
struct platform_device *dss_pdev;
memset(&pdata, 0, sizeof(pdata));
/* create omapdss device */
board_data->dsi_enable_pads = omap_dsi_enable_pads;
board_data->dsi_disable_pads = omap_dsi_disable_pads;
board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count;
board_data->set_min_bus_tput = omap_dss_set_min_bus_tput;
omap_display_device.dev.platform_data = board_data;
r = platform_device_register(&omap_display_device);
if (r < 0) {
pr_err("Unable to register omapdss device\n");
return r;
}
/* create devices for dss hwmods */
if (cpu_is_omap24xx()) {
curr_dss_hwmod = omap2_dss_hwmod_data;
@ -202,39 +319,58 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
}
if (board_data->dsi_enable_pads == NULL)
board_data->dsi_enable_pads = omap_dsi_enable_pads;
if (board_data->dsi_disable_pads == NULL)
board_data->dsi_disable_pads = omap_dsi_disable_pads;
/*
* First create the pdev for dss_core, which is used as a parent device
* by the other dss pdevs. Note: dss_core has to be the first item in
* the hwmod list.
*/
dss_pdev = create_dss_pdev(curr_dss_hwmod[0].dev_name,
curr_dss_hwmod[0].id,
curr_dss_hwmod[0].oh_name,
board_data, sizeof(*board_data),
NULL);
pdata.board_data = board_data;
pdata.board_data->get_context_loss_count =
omap_pm_get_dev_context_loss_count;
if (IS_ERR(dss_pdev)) {
pr_err("Could not build omap_device for %s\n",
curr_dss_hwmod[0].oh_name);
for (i = 0; i < oh_count; i++) {
oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name);
if (!oh) {
pr_err("Could not look up %s\n",
return PTR_ERR(dss_pdev);
}
for (i = 1; i < oh_count; i++) {
pdev = create_dss_pdev(curr_dss_hwmod[i].dev_name,
curr_dss_hwmod[i].id,
curr_dss_hwmod[i].oh_name,
board_data, sizeof(*board_data),
dss_pdev);
if (IS_ERR(pdev)) {
pr_err("Could not build omap_device for %s\n",
curr_dss_hwmod[i].oh_name);
return -ENODEV;
return PTR_ERR(pdev);
}
}
pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
curr_dss_hwmod[i].id, oh, &pdata,
sizeof(struct omap_display_platform_data),
NULL, 0, 0);
/* Create devices for DPI and SDI */
if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
curr_dss_hwmod[i].oh_name))
return -ENODEV;
pdev = create_simple_dss_pdev("omapdss_dpi", -1,
board_data, sizeof(*board_data), dss_pdev);
if (IS_ERR(pdev)) {
pr_err("Could not build platform_device for omapdss_dpi\n");
return PTR_ERR(pdev);
}
omap_display_device.dev.platform_data = board_data;
r = platform_device_register(&omap_display_device);
if (r < 0)
printk(KERN_ERR "Unable to register OMAP-Display device\n");
if (cpu_is_omap34xx()) {
pdev = create_simple_dss_pdev("omapdss_sdi", -1,
board_data, sizeof(*board_data), dss_pdev);
if (IS_ERR(pdev)) {
pr_err("Could not build platform_device for omapdss_sdi\n");
return PTR_ERR(pdev);
}
}
return r;
return 0;
}
static void dispc_disable_outputs(void)

17
arch/arm/mach-omap2/omap_hwmod.c
Просмотреть файл

@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
goto dis_opt_clks;
_write_sysconfig(v, oh);
if (oh->class->sysc->srst_udelay)
udelay(oh->class->sysc->srst_udelay);
if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
omap_test_timeout((omap_hwmod_read(oh,
oh->class->sysc->syss_offs)
@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
*/
int omap_hwmod_softreset(struct omap_hwmod *oh)
{
if (!oh)
u32 v;
int ret;
if (!oh || !(oh->_sysc_cache))
return -EINVAL;
return _ocp_softreset(oh);
v = oh->_sysc_cache;
ret = _set_softreset(oh, &v);
if (ret)
goto error;
_write_sysconfig(v, oh);
error:
return ret;
}
/**

1
arch/arm/mach-omap2/omap_hwmod_2420_data.c
Просмотреть файл

@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.flags = OMAP_FIREWALL_L4,
}
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

1
arch/arm/mach-omap2/omap_hwmod_2430_data.c
Просмотреть файл

@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.slave = &omap2430_dss_venc_hwmod,
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

1
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
Просмотреть файл

@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.flags = OMAP_FIREWALL_L4,
}
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

9
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
Просмотреть файл

@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
/*
* ISS needs 100 OCP clk cycles delay after a softreset before
* accessing sysconfig again.
* The lowest frequency at the moment for L3 bus is 100 MHz, so
* 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
*
* TODO: Indicate errata when available.
*/
.srst_udelay = 2,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |

124
arch/arm/mach-omap2/serial.c
Просмотреть файл

@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
static void omap_uart_set_smartidle(struct platform_device *pdev)
{
struct omap_device *od = to_omap_device(pdev);
u8 idlemode;
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
else
idlemode = HWMOD_IDLEMODE_SMART;
omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
}
#else
@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
static struct omap_device_pad default_uart1_pads[] __initdata = {
{
.name = "uart1_cts.uart1_cts",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart1_rts.uart1_rts",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart1_tx.uart1_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart1_rx.uart1_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_uart2_pads[] __initdata = {
{
.name = "uart2_cts.uart2_cts",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart2_rts.uart2_rts",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart2_tx.uart2_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart2_rx.uart2_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_uart3_pads[] __initdata = {
{
.name = "uart3_cts_rctx.uart3_cts_rctx",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart3_rts_sd.uart3_rts_sd",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart3_tx_irtx.uart3_tx_irtx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart3_rx_irrx.uart3_rx_irrx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
{
.name = "gpmc_wait2.uart4_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "gpmc_wait3.uart4_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
},
};
static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
{
.name = "uart4_tx.uart4_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart4_rx.uart4_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
},
};
static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
{
switch (bdata->id) {
case 0:
bdata->pads = default_uart1_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
break;
case 1:
bdata->pads = default_uart2_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
break;
case 2:
bdata->pads = default_uart3_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
break;
case 3:
if (cpu_is_omap44xx()) {
bdata->pads = default_omap4_uart4_pads;
bdata->pads_cnt =
ARRAY_SIZE(default_omap4_uart4_pads);
} else if (cpu_is_omap3630()) {
bdata->pads = default_omap36xx_uart4_pads;
bdata->pads_cnt =
ARRAY_SIZE(default_omap36xx_uart4_pads);
}
break;
default:
break;
}
}
#else
static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}

33
arch/arm/mach-omap2/twl-common.c
Просмотреть файл

@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = {
.flags = I2C_CLIENT_WAKE,
};
static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
{
.addr = 0x48,
.flags = I2C_CLIENT_WAKE,
},
{
I2C_BOARD_INFO("twl6040", 0x4b),
},
};
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
@ -49,13 +59,30 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
void __init omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
omap4_i2c1_board_info[0].platform_data = pmic_data;
/* TWL6040 audio IC part */
omap4_i2c1_board_info[1].irq = twl6040_irq;
omap4_i2c1_board_info[1].platform_data = twl6040_data;
omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
}
void __init omap_pmic_late_init(void)
{
/* Init the OMAP TWL parameters (if PMIC has been registerd) */
if (!pmic_i2c_board_info.irq)
return;
if (pmic_i2c_board_info.irq)
omap3_twl_init();
if (omap4_i2c1_board_info[0].irq)
omap4_twl_init();
}

10
arch/arm/mach-omap2/twl-common.h
Просмотреть файл

@ -29,6 +29,7 @@
struct twl4030_platform_data;
struct twl6040_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type,
omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
}
static inline void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
}
void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct twl6040_platform_data *audio_data, int twl6040_irq);
void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);

2
arch/arm/mach-s5pv210/dma.c
Просмотреть файл

@ -33,8 +33,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static u8 pdma0_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,

4
arch/arm/mach-s5pv210/mach-aquila.c
Просмотреть файл

@ -480,8 +480,8 @@ static struct wm8994_pdata wm8994_platform_data = {
.gpio_defaults[8] = 0x0100,
.gpio_defaults[9] = 0x0100,
.gpio_defaults[10] = 0x0100,
.ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, NULL, &wm8994_ldo2_data },
.ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, &wm8994_ldo2_data },
};
/* GPIO I2C PMIC */

4
arch/arm/mach-s5pv210/mach-goni.c
Просмотреть файл

@ -678,8 +678,8 @@ static struct wm8994_pdata wm8994_platform_data = {
.gpio_defaults[8] = 0x0100,
.gpio_defaults[9] = 0x0100,
.gpio_defaults[10] = 0x0100,
.ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, NULL, &wm8994_ldo2_data },
.ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, &wm8994_ldo2_data },
};
/* GPIO I2C PMIC */

1
arch/arm/mach-ux500/Kconfig
Просмотреть файл

@ -17,6 +17,7 @@ config UX500_SOC_DB5500
config UX500_SOC_DB8500
bool
select MFD_DB8500_PRCMU
select REGULATOR
select REGULATOR_DB8500_PRCMU
select CPU_FREQ_TABLE if CPU_FREQ

2
arch/arm/mach-ux500/platsmp.c
Просмотреть файл

@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(cpu_logical_map(cpu));
gic_raise_softirq(cpumask_of(cpu), 1);
smp_send_reschedule(cpu);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {

2
arch/arm/mm/Kconfig
Просмотреть файл

@ -723,7 +723,7 @@ config CPU_HIGH_VECTOR
bool "Select the High exception vector"
help
Say Y here to select high exception vector(0xFFFF0000~).
The exception vector can be vary depending on the platform
The exception vector can vary depending on the platform
design in nommu mode. If your platform needs to select
high exception vector, say Y.
Otherwise or if you are unsure, say N, and the low exception

2
arch/arm/mm/fault.c
Просмотреть файл

@ -320,7 +320,7 @@ retry:
*/
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,

2
arch/arm/mm/nommu.c
Просмотреть файл

@ -13,6 +13,7 @@
#include <asm/sections.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/traps.h>
#include <asm/mach/arch.h>
#include "mm.h"
@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void)
*/
void __init paging_init(struct machine_desc *mdesc)
{
early_trap_init((void *)CONFIG_VECTORS_BASE);
bootmem_init();
}

12
arch/arm/mm/proc-v7.S
Просмотреть файл

@ -254,6 +254,18 @@ __v7_setup:
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
#ifndef CONFIG_ARM_THUMBEE
mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE
and r0, r0, #(0xf << 12) @ ThumbEE enabled field
teq r0, #(1 << 12) @ check if ThumbEE is present
bne 1f
mov r5, #0
mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0
mrc p14, 6, r0, c0, c0, 0 @ load TEECR
orr r0, r0, #1 @ set the 1st bit in order to
mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access
1:
#endif
adr r5, v7_crval
ldmia r5, {r5, r6}

26
arch/arm/plat-omap/clock.c
Просмотреть файл

@ -398,32 +398,6 @@ struct clk dummy_ck = {
.ops = &clkops_null,
};
#ifdef CONFIG_CPU_FREQ
void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
return;
spin_lock_irqsave(&clockfw_lock, flags);
arch_clock->clk_init_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
return;
spin_lock_irqsave(&clockfw_lock, flags);
arch_clock->clk_exit_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
#endif
/*
*
*/

10
arch/arm/plat-omap/include/plat/clock.h
Просмотреть файл

@ -272,8 +272,6 @@ struct clk {
#endif
};
struct cpufreq_frequency_table;
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
@ -283,10 +281,6 @@ struct clk_functions {
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
#ifdef CONFIG_CPU_FREQ
void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
#endif
};
extern int mpurate;
@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
#ifdef CONFIG_CPU_FREQ
extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#endif
extern struct clk *omap_clk_get_by_name(const char *name);
extern int omap_clk_enable_autoidle_all(void);
extern int omap_clk_disable_autoidle_all(void);

4
arch/arm/plat-omap/include/plat/omap_hwmod.h
Просмотреть файл

@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields {
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
* @srst_udelay: Delay needed after doing a softreset in usecs
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig {
u16 sysc_offs;
u16 syss_offs;
u16 sysc_flags;
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
u8 idlemodes;
u8 clockact;
struct omap_hwmod_sysc_fields *sysc_fields;
};
/**

12
arch/arm/plat-omap/sram.c
Просмотреть файл

@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
#ifdef CONFIG_PM
void omap3_sram_restore_context(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
@ -358,17 +357,18 @@ void omap3_sram_restore_context(void)
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
#endif /* CONFIG_PM */
#endif /* CONFIG_ARCH_OMAP3 */
static inline int omap34xx_sram_init(void)
{
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
omap3_sram_restore_context();
#endif
return 0;
}
#else
static inline int omap34xx_sram_init(void)
{
return 0;
}
#endif /* CONFIG_ARCH_OMAP3 */
static inline int am33xx_sram_init(void)
{

1
arch/arm/plat-samsung/Kconfig
Просмотреть файл

@ -302,6 +302,7 @@ comment "Power management"
config SAMSUNG_PM_DEBUG
bool "S3C2410 PM Suspend debug"
depends on PM
select DEBUG_LL
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>

4
arch/c6x/include/asm/irq.h
Просмотреть файл

@ -42,10 +42,6 @@
/* This number is used when no interrupt has been assigned */
#define NO_IRQ 0
struct irq_data;
extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
extern irq_hw_number_t virq_to_hw(unsigned int virq);
extern void __init init_pic_c64xplus(void);
extern void init_IRQ(void);

13
arch/c6x/kernel/irq.c
Просмотреть файл

@ -130,16 +130,3 @@ int arch_show_interrupts(struct seq_file *p, int prec)
seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
return 0;
}
irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
{
return d->hwirq;
}
EXPORT_SYMBOL_GPL(irqd_to_hwirq);
irq_hw_number_t virq_to_hw(unsigned int virq)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
return WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
}
EXPORT_SYMBOL_GPL(virq_to_hw);

148
arch/ia64/include/asm/cmpxchg.h
Просмотреть файл

@ -1 +1,147 @@
#include <asm/intrinsics.h>
#ifndef _ASM_IA64_CMPXCHG_H
#define _ASM_IA64_CMPXCHG_H
/*
* Compare/Exchange, forked from asm/intrinsics.h
* which was:
*
* Copyright (C) 2002-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#ifndef __ASSEMBLY__
#include <linux/types.h>
/* include compiler specific intrinsics */
#include <asm/ia64regs.h>
#ifdef __INTEL_COMPILER
# include <asm/intel_intrin.h>
#else
# include <asm/gcc_intrin.h>
#endif
/*
* This function doesn't exist, so you'll get a linker error if
* something tries to do an invalid xchg().
*/
extern void ia64_xchg_called_with_bad_pointer(void);
#define __xchg(x, ptr, size) \
({ \
unsigned long __xchg_result; \
\
switch (size) { \
case 1: \
__xchg_result = ia64_xchg1((__u8 *)ptr, x); \
break; \
\
case 2: \
__xchg_result = ia64_xchg2((__u16 *)ptr, x); \
break; \
\
case 4: \
__xchg_result = ia64_xchg4((__u32 *)ptr, x); \
break; \
\
case 8: \
__xchg_result = ia64_xchg8((__u64 *)ptr, x); \
break; \
default: \
ia64_xchg_called_with_bad_pointer(); \
} \
__xchg_result; \
})
#define xchg(ptr, x) \
((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr))))
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*/
#define __HAVE_ARCH_CMPXCHG 1
/*
* This function doesn't exist, so you'll get a linker error
* if something tries to do an invalid cmpxchg().
*/
extern long ia64_cmpxchg_called_with_bad_pointer(void);
#define ia64_cmpxchg(sem, ptr, old, new, size) \
({ \
__u64 _o_, _r_; \
\
switch (size) { \
case 1: \
_o_ = (__u8) (long) (old); \
break; \
case 2: \
_o_ = (__u16) (long) (old); \
break; \
case 4: \
_o_ = (__u32) (long) (old); \
break; \
case 8: \
_o_ = (__u64) (long) (old); \
break; \
default: \
break; \
} \
switch (size) { \
case 1: \
_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \
break; \
\
case 2: \
_r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \
break; \
\
case 4: \
_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \
break; \
\
case 8: \
_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \
break; \
\
default: \
_r_ = ia64_cmpxchg_called_with_bad_pointer(); \
break; \
} \
(__typeof__(old)) _r_; \
})
#define cmpxchg_acq(ptr, o, n) \
ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
#define cmpxchg_rel(ptr, o, n) \
ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
/* for compatibility with other platforms: */
#define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n))
#define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n))
#define cmpxchg_local cmpxchg
#define cmpxchg64_local cmpxchg64
#ifdef CONFIG_IA64_DEBUG_CMPXCHG
# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128;
# define CMPXCHG_BUGCHECK(v) \
do { \
if (_cmpxchg_bugcheck_count-- <= 0) { \
void *ip; \
extern int printk(const char *fmt, ...); \
ip = (void *) ia64_getreg(_IA64_REG_IP); \
printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));\
break; \
} \
} while (0)
#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
# define CMPXCHG_BUGCHECK_DECL
# define CMPXCHG_BUGCHECK(v)
#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_IA64_CMPXCHG_H */

9
arch/ia64/include/asm/futex.h
Просмотреть файл

@ -106,15 +106,16 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
return -EFAULT;
{
register unsigned long r8 __asm ("r8") = 0;
register unsigned long r8 __asm ("r8");
unsigned long prev;
__asm__ __volatile__(
" mf;; \n"
" mov ar.ccv=%3;; \n"
"[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n"
" mov %0=r0 \n"
" mov ar.ccv=%4;; \n"
"[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n"
" .xdata4 \"__ex_table\", 1b-., 2f-. \n"
"[2:]"
: "=r" (prev)
: "=r" (r8), "=r" (prev)
: "r" (uaddr), "r" (newval),
"rO" ((long) (unsigned) oldval)
: "memory");

114
arch/ia64/include/asm/intrinsics.h
Просмотреть файл

@ -18,6 +18,7 @@
#else
# include <asm/gcc_intrin.h>
#endif
#include <asm/cmpxchg.h>
#define ia64_native_get_psr_i() (ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I)
@ -81,119 +82,6 @@ extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
#define ia64_fetch_and_add(i,v) (ia64_fetchadd(i, v, rel) + (i)) /* return new value */
/*
* This function doesn't exist, so you'll get a linker error if
* something tries to do an invalid xchg().
*/
extern void ia64_xchg_called_with_bad_pointer (void);
#define __xchg(x,ptr,size) \
({ \
unsigned long __xchg_result; \
\
switch (size) { \
case 1: \
__xchg_result = ia64_xchg1((__u8 *)ptr, x); \
break; \
\
case 2: \
__xchg_result = ia64_xchg2((__u16 *)ptr, x); \
break; \
\
case 4: \
__xchg_result = ia64_xchg4((__u32 *)ptr, x); \
break; \
\
case 8: \
__xchg_result = ia64_xchg8((__u64 *)ptr, x); \
break; \
default: \
ia64_xchg_called_with_bad_pointer(); \
} \
__xchg_result; \
})
#define xchg(ptr,x) \
((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*/
#define __HAVE_ARCH_CMPXCHG 1
/*
* This function doesn't exist, so you'll get a linker error
* if something tries to do an invalid cmpxchg().
*/
extern long ia64_cmpxchg_called_with_bad_pointer (void);
#define ia64_cmpxchg(sem,ptr,old,new,size) \
({ \
__u64 _o_, _r_; \
\
switch (size) { \
case 1: _o_ = (__u8 ) (long) (old); break; \
case 2: _o_ = (__u16) (long) (old); break; \
case 4: _o_ = (__u32) (long) (old); break; \
case 8: _o_ = (__u64) (long) (old); break; \
default: break; \
} \
switch (size) { \
case 1: \
_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \
break; \
\
case 2: \
_r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \
break; \
\
case 4: \
_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \
break; \
\
case 8: \
_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \
break; \
\
default: \
_r_ = ia64_cmpxchg_called_with_bad_pointer(); \
break; \
} \
(__typeof__(old)) _r_; \
})
#define cmpxchg_acq(ptr, o, n) \
ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
#define cmpxchg_rel(ptr, o, n) \
ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
/* for compatibility with other platforms: */
#define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n))
#define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n))
#define cmpxchg_local cmpxchg
#define cmpxchg64_local cmpxchg64
#ifdef CONFIG_IA64_DEBUG_CMPXCHG
# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128;
# define CMPXCHG_BUGCHECK(v) \
do { \
if (_cmpxchg_bugcheck_count-- <= 0) { \
void *ip; \
extern int printk(const char *fmt, ...); \
ip = (void *) ia64_getreg(_IA64_REG_IP); \
printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v)); \
break; \
} \
} while (0)
#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
# define CMPXCHG_BUGCHECK_DECL
# define CMPXCHG_BUGCHECK(v)
#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
#endif
#ifdef __KERNEL__

18
arch/ia64/kernel/perfmon.c
Просмотреть файл

@ -604,12 +604,6 @@ pfm_unprotect_ctx_ctxsw(pfm_context_t *x, unsigned long f)
spin_unlock(&(x)->ctx_lock);
}
static inline unsigned int
pfm_do_munmap(struct mm_struct *mm, unsigned long addr, size_t len, int acct)
{
return do_munmap(mm, addr, len);
}
static inline unsigned long
pfm_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags, unsigned long exec)
{
@ -1458,8 +1452,9 @@ pfm_unreserve_session(pfm_context_t *ctx, int is_syswide, unsigned int cpu)
* a PROTECT_CTX() section.
*/
static int
pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long size)
pfm_remove_smpl_mapping(void *vaddr, unsigned long size)
{
struct task_struct *task = current;
int r;
/* sanity checks */
@ -1473,13 +1468,8 @@ pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long siz
/*
* does the actual unmapping
*/
down_write(&task->mm->mmap_sem);
r = vm_munmap((unsigned long)vaddr, size);
DPRINT(("down_write done smpl_vaddr=%p size=%lu\n", vaddr, size));
r = pfm_do_munmap(task->mm, (unsigned long)vaddr, size, 0);
up_write(&task->mm->mmap_sem);
if (r !=0) {
printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size);
}
@ -1945,7 +1935,7 @@ pfm_flush(struct file *filp, fl_owner_t id)
* because some VM function reenables interrupts.
*
*/
if (smpl_buf_vaddr) pfm_remove_smpl_mapping(current, smpl_buf_vaddr, smpl_buf_size);
if (smpl_buf_vaddr) pfm_remove_smpl_mapping(smpl_buf_vaddr, smpl_buf_size);
return 0;
}

1
arch/m68k/configs/m5275evb_defconfig
Просмотреть файл

@ -49,7 +49,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_FEC=y
CONFIG_FEC2=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y

2
arch/m68k/platform/527x/config.c
Просмотреть файл

@ -74,9 +74,7 @@ static void __init m527x_fec_init(void)
writew(par | 0xf00, MCF_IPSBAR + 0x100082);
v = readb(MCF_IPSBAR + 0x100078);
writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
#endif
#ifdef CONFIG_FEC2
/* Set multi-function pins to ethernet mode for fec1 */
par = readw(MCF_IPSBAR + 0x100082);
writew(par | 0xa0, MCF_IPSBAR + 0x100082);

6
arch/m68k/platform/68EZ328/Makefile
Просмотреть файл

@ -3,9 +3,3 @@
#
obj-y := config.o
extra-y := bootlogo.rh
$(obj)/bootlogo.rh: $(src)/bootlogo.h
perl $(src)/../68328/bootlogo.pl < $(src)/bootlogo.h \
> $(obj)/bootlogo.rh

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше