dsa: qca8k: add mac_power_sel support

Add missing mac power sel support needed for ipq8064/5 SoC that require
1.8v for the internal regulator port instead of the default 1.5v.
If other device needs this, consider adding a dedicated binding to
support this.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/qca8k.c

@@ -950,6 +950,33 @@ qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv)
 	return 0;
 }
 
+static int
+qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
+{
+	u32 mask = 0;
+	int ret = 0;
+
+	/* SoC specific settings for ipq8064.
+	 * If more device require this consider adding
+	 * a dedicated binding.
+	 */
+	if (of_machine_is_compatible("qcom,ipq8064"))
+		mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
+
+	/* SoC specific settings for ipq8065 */
+	if (of_machine_is_compatible("qcom,ipq8065"))
+		mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
+
+	if (mask) {
+		ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
+				QCA8K_MAC_PWR_RGMII0_1_8V |
+				QCA8K_MAC_PWR_RGMII1_1_8V,
+				mask);
+	}
+
+	return ret;
+}
+
 static int
 qca8k_setup(struct dsa_switch *ds)
 {
@@ -979,6 +1006,10 @@ qca8k_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
+	ret = qca8k_setup_mac_pwr_sel(priv);
+	if (ret)
+		return ret;
+
 	/* Enable CPU Port */
 	ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
 			    QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);

drivers/net/dsa/qca8k.h

@@ -100,6 +100,11 @@
 #define   QCA8K_SGMII_MODE_CTRL_PHY			(1 << 22)
 #define   QCA8K_SGMII_MODE_CTRL_MAC			(2 << 22)
 
+/* MAC_PWR_SEL registers */
+#define QCA8K_REG_MAC_PWR_SEL				0x0e4
+#define   QCA8K_MAC_PWR_RGMII1_1_8V			BIT(18)
+#define   QCA8K_MAC_PWR_RGMII0_1_8V			BIT(19)
+
 /* EEE control registers */
 #define QCA8K_REG_EEE_CTRL				0x100
 #define  QCA8K_REG_EEE_CTRL_LPI_EN(_i)			((_i + 1) * 2)