mtd: spi-nor: remove the jedec_id/ext_id
The "id" array contains all the information about the JEDEC and the manufacturer ID info. This patch removes the jedec_id/ext_id from flash_info. Signed-off-by: Huang Shijie <shijie.huang@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This commit is contained in:
Huang Shijie
Brian Norris
Родитель
09ffafb697
Коммит
d928a25938
|
|
@ -26,7 +26,38 @@
|
|||
/* Define max times to check status register before we give up. */
|
||||
#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
|
||||
|
||||
#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
|
||||
#define SPI_NOR_MAX_ID_LEN 6
|
||||
|
||||
struct flash_info {
|
||||
/*
|
||||
* This array stores the ID bytes.
|
||||
* The first three bytes are the JEDIC ID.
|
||||
* JEDEC ID zero means "no ID" (mostly older chips).
|
||||
*/
|
||||
u8 id[SPI_NOR_MAX_ID_LEN];
|
||||
u8 id_len;
|
||||
|
||||
/* The size listed here is what works with SPINOR_OP_SE, which isn't
|
||||
* necessarily called a "sector" by the vendor.
|
||||
*/
|
||||
unsigned sector_size;
|
||||
u16 n_sectors;
|
||||
|
||||
u16 page_size;
|
||||
u16 addr_width;
|
||||
|
||||
u16 flags;
|
||||
#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
|
||||
#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
|
||||
#define SST_WRITE 0x04 /* use SST byte programming */
|
||||
#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
|
||||
#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
|
||||
#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
|
||||
#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
|
||||
#define USE_FSR 0x80 /* use flag status register */
|
||||
};
|
||||
|
||||
#define JEDEC_MFR(info) ((info)->id[0])
|
||||
|
||||
static const struct spi_device_id *spi_nor_match_id(const char *name);
|
||||
|
||||
|
|
@ -138,13 +169,14 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
|
|||
}
|
||||
|
||||
/* Enable/disable 4-byte addressing mode. */
|
||||
static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
|
||||
static inline int set_4byte(struct spi_nor *nor, struct flash_info *info,
|
||||
int enable)
|
||||
{
|
||||
int status;
|
||||
bool need_wren = false;
|
||||
u8 cmd;
|
||||
|
||||
switch (JEDEC_MFR(jedec_id)) {
|
||||
switch (JEDEC_MFR(info)) {
|
||||
case CFI_MFR_ST: /* Micron, actually */
|
||||
/* Some Micron need WREN command; all will accept it */
|
||||
need_wren = true;
|
||||
|
|
@ -418,49 +450,9 @@ err:
|
|||
return ret;
|
||||
}
|
||||
|
||||
#define SPI_NOR_MAX_ID_LEN 6
|
||||
|
||||
struct flash_info {
|
||||
/* JEDEC id zero means "no ID" (most older chips); otherwise it has
|
||||
* a high byte of zero plus three data bytes: the manufacturer id,
|
||||
* then a two byte device id.
|
||||
*/
|
||||
u32 jedec_id;
|
||||
u16 ext_id;
|
||||
|
||||
/*
|
||||
* This array stores the ID bytes.
|
||||
* The first three bytes are the JEDIC ID.
|
||||
* JEDEC ID zero means "no ID" (mostly older chips).
|
||||
*/
|
||||
u8 id[SPI_NOR_MAX_ID_LEN];
|
||||
u8 id_len;
|
||||
|
||||
/* The size listed here is what works with SPINOR_OP_SE, which isn't
|
||||
* necessarily called a "sector" by the vendor.
|
||||
*/
|
||||
unsigned sector_size;
|
||||
u16 n_sectors;
|
||||
|
||||
u16 page_size;
|
||||
u16 addr_width;
|
||||
|
||||
u16 flags;
|
||||
#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
|
||||
#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
|
||||
#define SST_WRITE 0x04 /* use SST byte programming */
|
||||
#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
|
||||
#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
|
||||
#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
|
||||
#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
|
||||
#define USE_FSR 0x80 /* use flag status register */
|
||||
};
|
||||
|
||||
/* Used when the "_ext_id" is two bytes at most */
|
||||
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
|
||||
((kernel_ulong_t)&(struct flash_info) { \
|
||||
.jedec_id = (_jedec_id), \
|
||||
.ext_id = (_ext_id), \
|
||||
.id = { \
|
||||
((_jedec_id) >> 16) & 0xff, \
|
||||
((_jedec_id) >> 8) & 0xff, \
|
||||
|
|
@ -878,11 +870,11 @@ static int spansion_quad_enable(struct spi_nor *nor)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
|
||||
static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
|
||||
{
|
||||
int status;
|
||||
|
||||
switch (JEDEC_MFR(jedec_id)) {
|
||||
switch (JEDEC_MFR(info)) {
|
||||
case CFI_MFR_MACRONIX:
|
||||
status = macronix_quad_enable(nor);
|
||||
if (status) {
|
||||
|
|
@ -931,7 +923,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
|
|||
|
||||
info = (void *)id->driver_data;
|
||||
|
||||
if (info->jedec_id) {
|
||||
if (info->id_len) {
|
||||
const struct spi_device_id *jid;
|
||||
|
||||
jid = spi_nor_read_id(nor);
|
||||
|
|
@ -959,9 +951,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
|
|||
* up with the software protection bits set
|
||||
*/
|
||||
|
||||
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
|
||||
JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
|
||||
JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
|
||||
if (JEDEC_MFR(info) == CFI_MFR_ATMEL ||
|
||||
JEDEC_MFR(info) == CFI_MFR_INTEL ||
|
||||
JEDEC_MFR(info) == CFI_MFR_SST) {
|
||||
write_enable(nor);
|
||||
write_sr(nor, 0);
|
||||
}
|
||||
|
|
@ -976,7 +968,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
|
|||
mtd->_read = spi_nor_read;
|
||||
|
||||
/* nor protection support for STmicro chips */
|
||||
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
|
||||
if (JEDEC_MFR(info) == CFI_MFR_ST) {
|
||||
mtd->_lock = spi_nor_lock;
|
||||
mtd->_unlock = spi_nor_unlock;
|
||||
}
|
||||
|
|
@ -1029,7 +1021,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
|
|||
|
||||
/* Quad/Dual-read mode takes precedence over fast/normal */
|
||||
if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
|
||||
ret = set_quad_mode(nor, info->jedec_id);
|
||||
ret = set_quad_mode(nor, info);
|
||||
if (ret) {
|
||||
dev_err(dev, "quad mode not supported\n");
|
||||
return ret;
|
||||
|
|
@ -1065,7 +1057,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
|
|||
else if (mtd->size > 0x1000000) {
|
||||
/* enable 4-byte addressing if the device exceeds 16MiB */
|
||||
nor->addr_width = 4;
|
||||
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
|
||||
if (JEDEC_MFR(info) == CFI_MFR_AMD) {
|
||||
/* Dedicated 4-byte command set */
|
||||
switch (nor->flash_read) {
|
||||
case SPI_NOR_QUAD:
|
||||
|
|
@ -1086,7 +1078,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
|
|||
nor->erase_opcode = SPINOR_OP_SE_4B;
|
||||
mtd->erasesize = info->sector_size;
|
||||
} else
|
||||
set_4byte(nor, info->jedec_id, 1);
|
||||
set_4byte(nor, info, 1);
|
||||
} else {
|
||||
nor->addr_width = 3;
|
||||
}
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче