oprofile, x86: Add support for 6 counters (AMD family 15h)

This patch adds support for up to 6 hardware counters for AMD family
15h cpus. There is a new MSR range for hardware counters beginning at
MSRC001_0200 Performance Event Select (PERF_CTL0).

Signed-off-by: Robert Richter <robert.richter@amd.com>
This commit is contained in:
Robert Richter 2010-09-24 15:54:43 +02:00
Родитель 30570bced1
Коммит da169f5df2
2 изменённых файлов: 40 добавлений и 18 удалений

Просмотреть файл

@ -123,6 +123,10 @@
#define MSR_AMD64_IBSCTL 0xc001103a
#define MSR_AMD64_IBSBRTARGET 0xc001103b
/* Fam 15h MSRs */
#define MSR_F15H_PERF_CTL 0xc0010200
#define MSR_F15H_PERF_CTR 0xc0010201
/* Fam 10h MSRs */
#define MSR_FAM10H_MMIO_CONF_BASE 0xc0010058
#define FAM10H_MMIO_CONF_ENABLE (1<<0)

Просмотреть файл

@ -29,11 +29,12 @@
#include "op_x86_model.h"
#include "op_counter.h"
#define NUM_COUNTERS 4
#define NUM_COUNTERS 4
#define NUM_COUNTERS_F15H 6
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
#define NUM_VIRT_COUNTERS 32
#define NUM_VIRT_COUNTERS 32
#else
#define NUM_VIRT_COUNTERS NUM_COUNTERS
#define NUM_VIRT_COUNTERS 0
#endif
#define OP_EVENT_MASK 0x0FFF
@ -41,7 +42,8 @@
#define MSR_AMD_EVENTSEL_RESERVED ((0xFFFFFCF0ULL<<32)|(1ULL<<21))
static unsigned long reset_value[NUM_VIRT_COUNTERS];
static int num_counters;
static unsigned long reset_value[OP_MAX_COUNTER];
#define IBS_FETCH_SIZE 6
#define IBS_OP_SIZE 12
@ -387,7 +389,7 @@ static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
int i;
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
for (i = 0; i < num_counters; ++i) {
int virt = op_x86_phys_to_virt(i);
if (!reset_value[virt])
continue;
@ -406,7 +408,7 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
{
int i;
for (i = 0; i < NUM_COUNTERS; ++i) {
for (i = 0; i < num_counters; ++i) {
if (!msrs->counters[i].addr)
continue;
release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
@ -418,7 +420,7 @@ static int op_amd_fill_in_addresses(struct op_msrs * const msrs)
{
int i;
for (i = 0; i < NUM_COUNTERS; i++) {
for (i = 0; i < num_counters; i++) {
if (!reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
goto fail;
if (!reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) {
@ -426,8 +428,13 @@ static int op_amd_fill_in_addresses(struct op_msrs * const msrs)
goto fail;
}
/* both registers must be reserved */
msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
if (num_counters == NUM_COUNTERS_F15H) {
msrs->counters[i].addr = MSR_F15H_PERF_CTR + (i << 1);
msrs->controls[i].addr = MSR_F15H_PERF_CTL + (i << 1);
} else {
msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
}
continue;
fail:
if (!counter_config[i].enabled)
@ -447,7 +454,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
int i;
/* setup reset_value */
for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
for (i = 0; i < OP_MAX_COUNTER; ++i) {
if (counter_config[i].enabled
&& msrs->counters[op_x86_virt_to_phys(i)].addr)
reset_value[i] = counter_config[i].count;
@ -456,7 +463,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
}
/* clear all counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
for (i = 0; i < num_counters; ++i) {
if (!msrs->controls[i].addr)
continue;
rdmsrl(msrs->controls[i].addr, val);
@ -472,7 +479,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
}
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
for (i = 0; i < num_counters; ++i) {
int virt = op_x86_phys_to_virt(i);
if (!reset_value[virt])
continue;
@ -503,7 +510,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
u64 val;
int i;
for (i = 0; i < NUM_COUNTERS; ++i) {
for (i = 0; i < num_counters; ++i) {
int virt = op_x86_phys_to_virt(i);
if (!reset_value[virt])
continue;
@ -526,7 +533,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
u64 val;
int i;
for (i = 0; i < NUM_COUNTERS; ++i) {
for (i = 0; i < num_counters; ++i) {
if (!reset_value[op_x86_phys_to_virt(i)])
continue;
rdmsrl(msrs->controls[i].addr, val);
@ -546,7 +553,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
* Subtle: stop on all counters to avoid race with setting our
* pm callback
*/
for (i = 0; i < NUM_COUNTERS; ++i) {
for (i = 0; i < num_counters; ++i) {
if (!reset_value[op_x86_phys_to_virt(i)])
continue;
rdmsrl(msrs->controls[i].addr, val);
@ -698,18 +705,29 @@ static int setup_ibs_files(struct super_block *sb, struct dentry *root)
return 0;
}
struct op_x86_model_spec op_amd_spec;
static int op_amd_init(struct oprofile_operations *ops)
{
init_ibs();
create_arch_files = ops->create_files;
ops->create_files = setup_ibs_files;
if (boot_cpu_data.x86 == 0x15) {
num_counters = NUM_COUNTERS_F15H;
} else {
num_counters = NUM_COUNTERS;
}
op_amd_spec.num_counters = num_counters;
op_amd_spec.num_controls = num_counters;
op_amd_spec.num_virt_counters = max(num_counters, NUM_VIRT_COUNTERS);
return 0;
}
struct op_x86_model_spec op_amd_spec = {
.num_counters = NUM_COUNTERS,
.num_controls = NUM_COUNTERS,
.num_virt_counters = NUM_VIRT_COUNTERS,
/* num_counters/num_controls filled in at runtime */
.reserved = MSR_AMD_EVENTSEL_RESERVED,
.event_mask = OP_EVENT_MASK,
.init = op_amd_init,