USB: serial: visor: clean up clie_5 endpoint hack

Use the new endpoint-remap functionality to configure the ports for
clie_5 devices.

Note that the same bulk-out endpoint is being used for both ports.

Signed-off-by: Johan Hovold <johan@kernel.org>
This commit is contained in:
Johan Hovold 2017-03-16 17:13:52 +01:00
Родитель a5b669f4c6
Коммит da2befa6d5
1 изменённых файлов: 23 добавлений и 34 удалений

Просмотреть файл

@ -42,10 +42,11 @@ static int visor_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int visor_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds);
static int clie_5_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds);
static void visor_read_int_callback(struct urb *urb);
static int clie_3_5_startup(struct usb_serial *serial);
static int treo_attach(struct usb_serial *serial);
static int clie_5_attach(struct usb_serial *serial);
static int palm_os_3_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int palm_os_4_probe(struct usb_serial *serial,
@ -190,13 +191,14 @@ static struct usb_serial_driver clie_5_device = {
.description = "Sony Clie 5.0",
.id_table = clie_id_5_table,
.num_ports = 2,
.num_bulk_out = 2,
.bulk_out_size = 256,
.open = visor_open,
.close = visor_close,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.attach = clie_5_attach,
.probe = visor_probe,
.calc_num_ports = clie_5_calc_num_ports,
.read_int_callback = visor_read_int_callback,
};
@ -477,6 +479,25 @@ static int visor_calc_num_ports(struct usb_serial *serial,
return num_ports;
}
static int clie_5_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds)
{
/*
* TH55 registers 2 ports.
* Communication in from the UX50/TH55 uses the first bulk-in
* endpoint, while communication out to the UX50/TH55 uses the second
* bulk-out endpoint.
*/
/*
* FIXME: Should we swap the descriptors instead of using the same
* bulk-out endpoint for both ports?
*/
epds->bulk_out[0] = epds->bulk_out[1];
return serial->type->num_ports;
}
static int clie_3_5_startup(struct usb_serial *serial)
{
struct device *dev = &serial->dev->dev;
@ -588,38 +609,6 @@ static int treo_attach(struct usb_serial *serial)
return 0;
}
static int clie_5_attach(struct usb_serial *serial)
{
struct usb_serial_port *port;
unsigned int pipe;
int j;
/* TH55 registers 2 ports.
Communication in from the UX50/TH55 uses bulk_in_endpointAddress
from port 0. Communication out to the UX50/TH55 uses
bulk_out_endpointAddress from port 1
Lets do a quick and dirty mapping
*/
/* some sanity check */
if (serial->num_bulk_out < 2) {
dev_err(&serial->interface->dev, "missing bulk out endpoints\n");
return -ENODEV;
}
/* port 0 now uses the modified endpoint Address */
port = serial->port[0];
port->bulk_out_endpointAddress =
serial->port[1]->bulk_out_endpointAddress;
pipe = usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress);
for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j)
port->write_urbs[j]->pipe = pipe;
return 0;
}
module_usb_serial_driver(serial_drivers, id_table_combined);
MODULE_AUTHOR(DRIVER_AUTHOR);