microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

sata_rcar: Reset SATA PHY when Salvator-X board resumes 

Because power of Salvator-X board is cut off in suspend,
it needs to reset SATA PHY state in resume.
Otherwise, SATA partition could not be accessed anymore.

Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
Signed-off-by: Hien Dang <hien.dang.eb@rvc.renesas.com>
[reinit phy in sata_rcar_resume() function on R-Car Gen3 only]
[factor out SATA module init sequence]
[fixed the prefix for the subject]
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit is contained in:
Khiem Nguyen 2018-02-05 04:18:51 +09:00 коммит произвёл Tejun Heo
Родитель 2c1ec6fda2
Коммит da77d76b95
1 изменённых файлов: 40 добавлений и 23 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

63
drivers/ata/sata_rcar.c
Просмотреть файл

@ -146,6 +146,7 @@
enum sata_rcar_type {
RCAR_GEN1_SATA,
RCAR_GEN2_SATA,
RCAR_GEN3_SATA,
RCAR_R8A7790_ES1_SATA,
};
@ -784,26 +785,11 @@ static void sata_rcar_setup_port(struct ata_host *host)
ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2);
}
static void sata_rcar_init_controller(struct ata_host *host)
static void sata_rcar_init_module(struct sata_rcar_priv *priv)
{
struct sata_rcar_priv *priv = host->private_data;
void __iomem *base = priv->base;
u32 val;
/* reset and setup phy */
switch (priv->type) {
case RCAR_GEN1_SATA:
sata_rcar_gen1_phy_init(priv);
break;
case RCAR_GEN2_SATA:
case RCAR_R8A7790_ES1_SATA:
sata_rcar_gen2_phy_init(priv);
break;
default:
dev_warn(host->dev, "SATA phy is not initialized\n");
break;
}
/* SATA-IP reset state */
val = ioread32(base + ATAPI_CONTROL1_REG);
val |= ATAPI_CONTROL1_RESET;
@ -824,10 +810,34 @@ static void sata_rcar_init_controller(struct ata_host *host)
/* ack and mask */
iowrite32(0, base + SATAINTSTAT_REG);
iowrite32(0x7ff, base + SATAINTMASK_REG);
/* enable interrupts */
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
}
static void sata_rcar_init_controller(struct ata_host *host)
{
struct sata_rcar_priv *priv = host->private_data;
void __iomem *base = priv->base;
/* reset and setup phy */
switch (priv->type) {
case RCAR_GEN1_SATA:
sata_rcar_gen1_phy_init(priv);
break;
case RCAR_GEN2_SATA:
case RCAR_GEN3_SATA:
case RCAR_R8A7790_ES1_SATA:
sata_rcar_gen2_phy_init(priv);
break;
default:
dev_warn(host->dev, "SATA phy is not initialized\n");
break;
}
sata_rcar_init_module(priv);
}
static const struct of_device_id sata_rcar_match[] = {
{
/* Deprecated by "renesas,sata-r8a7779" */
@ -856,7 +866,7 @@ static const struct of_device_id sata_rcar_match[] = {
},
{
.compatible = "renesas,sata-r8a7795",
.data = (void *)RCAR_GEN2_SATA
.data = (void *)RCAR_GEN3_SATA
},
{
.compatible = "renesas,rcar-gen2-sata",
@ -864,7 +874,7 @@ static const struct of_device_id sata_rcar_match[] = {
},
{
.compatible = "renesas,rcar-gen3-sata",
.data = (void *)RCAR_GEN2_SATA
.data = (void *)RCAR_GEN3_SATA
},
{ },
};
@ -982,11 +992,18 @@ static int sata_rcar_resume(struct device *dev)
if (ret)
return ret;
/* ack and mask */
iowrite32(0, base + SATAINTSTAT_REG);
iowrite32(0x7ff, base + SATAINTMASK_REG);
/* enable interrupts */
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
if (priv->type == RCAR_GEN3_SATA) {
sata_rcar_gen2_phy_init(priv);
sata_rcar_init_module(priv);
} else {
/* ack and mask */
iowrite32(0, base + SATAINTSTAT_REG);
iowrite32(0x7ff, base + SATAINTMASK_REG);
/* enable interrupts */
iowrite32(ATAPI_INT_ENABLE_SATAINT,
base + ATAPI_INT_ENABLE_REG);
}
ata_host_resume(host);