mfd: Add new ab8500 GPADC driver
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Arun Murthy
Samuel Ortiz
Родитель
44bdcb54df
Коммит
dae2db30c1
|
|
@ -534,6 +534,13 @@ config AB8500_DEBUG
|
|||
Select this option if you want debug information using the debug
|
||||
filesystem, debugfs.
|
||||
|
||||
config AB8500_GPADC
|
||||
bool "AB8500 GPADC driver"
|
||||
depends on AB8500_CORE && REGULATOR_AB8500
|
||||
default y
|
||||
help
|
||||
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
|
||||
|
||||
config AB3550_CORE
|
||||
bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
|
||||
select MFD_CORE
|
||||
|
|
|
|||
|
|
@ -74,6 +74,7 @@ obj-$(CONFIG_AB3550_CORE) += ab3550-core.o
|
|||
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
|
||||
obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o
|
||||
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
|
||||
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
|
||||
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
|
||||
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
|
||||
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,296 @@
|
|||
/*
|
||||
* Copyright (C) ST-Ericsson SA 2010
|
||||
*
|
||||
* License Terms: GNU General Public License v2
|
||||
* Author: Arun R Murthy <arun.murthy@stericsson.com>
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/completion.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/mfd/ab8500.h>
|
||||
#include <linux/mfd/abx500.h>
|
||||
#include <linux/mfd/ab8500-gpadc.h>
|
||||
|
||||
/*
|
||||
* GPADC register offsets
|
||||
* Bank : 0x0A
|
||||
*/
|
||||
#define AB8500_GPADC_CTRL1_REG 0x00
|
||||
#define AB8500_GPADC_CTRL2_REG 0x01
|
||||
#define AB8500_GPADC_CTRL3_REG 0x02
|
||||
#define AB8500_GPADC_AUTO_TIMER_REG 0x03
|
||||
#define AB8500_GPADC_STAT_REG 0x04
|
||||
#define AB8500_GPADC_MANDATAL_REG 0x05
|
||||
#define AB8500_GPADC_MANDATAH_REG 0x06
|
||||
#define AB8500_GPADC_AUTODATAL_REG 0x07
|
||||
#define AB8500_GPADC_AUTODATAH_REG 0x08
|
||||
#define AB8500_GPADC_MUX_CTRL_REG 0x09
|
||||
|
||||
/* gpadc constants */
|
||||
#define EN_VINTCORE12 0x04
|
||||
#define EN_VTVOUT 0x02
|
||||
#define EN_GPADC 0x01
|
||||
#define DIS_GPADC 0x00
|
||||
#define SW_AVG_16 0x60
|
||||
#define ADC_SW_CONV 0x04
|
||||
#define EN_BUF 0x40
|
||||
#define DIS_ZERO 0x00
|
||||
#define GPADC_BUSY 0x01
|
||||
|
||||
/**
|
||||
* struct ab8500_gpadc - ab8500 GPADC device information
|
||||
* @dev: pointer to the struct device
|
||||
* @parent: pointer to the parent device structure ab8500
|
||||
* @ab8500_gpadc_complete: pointer to the struct completion, to indicate
|
||||
* the completion of gpadc conversion
|
||||
* @ab8500_gpadc_lock: structure of type mutex
|
||||
* @regu: pointer to the struct regulator
|
||||
* @irq: interrupt number that is used by gpadc
|
||||
*/
|
||||
static struct ab8500_gpadc {
|
||||
struct device *dev;
|
||||
struct ab8500 *parent;
|
||||
struct completion ab8500_gpadc_complete;
|
||||
struct mutex ab8500_gpadc_lock;
|
||||
struct regulator *regu;
|
||||
int irq;
|
||||
} *di;
|
||||
|
||||
/**
|
||||
* ab8500_gpadc_convert() - gpadc conversion
|
||||
* @input: analog input to be converted to digital data
|
||||
*
|
||||
* This function converts the selected analog i/p to digital
|
||||
* data. Thereafter calibration has to be made to obtain the
|
||||
* data in the required quantity measurement.
|
||||
*/
|
||||
int ab8500_gpadc_convert(u8 input)
|
||||
{
|
||||
int ret;
|
||||
u16 data = 0;
|
||||
int looplimit = 0;
|
||||
u8 val, low_data, high_data;
|
||||
|
||||
if (!di)
|
||||
return -ENODEV;
|
||||
|
||||
mutex_lock(&di->ab8500_gpadc_lock);
|
||||
/* Enable VTVout LDO this is required for GPADC */
|
||||
regulator_enable(di->regu);
|
||||
|
||||
/* Check if ADC is not busy, lock and proceed */
|
||||
do {
|
||||
ret = abx500_get_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_STAT_REG, &val);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
if (!(val & GPADC_BUSY))
|
||||
break;
|
||||
msleep(10);
|
||||
} while (++looplimit < 10);
|
||||
if (looplimit >= 10 && (val & GPADC_BUSY)) {
|
||||
dev_err(di->dev, "gpadc_conversion: GPADC busy");
|
||||
ret = -EINVAL;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* Enable GPADC */
|
||||
ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC);
|
||||
if (ret < 0) {
|
||||
dev_err(di->dev, "gpadc_conversion: enable gpadc failed\n");
|
||||
goto out;
|
||||
}
|
||||
/* Select the input source and set average samples to 16 */
|
||||
ret = abx500_set_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_CTRL2_REG, (input | SW_AVG_16));
|
||||
if (ret < 0) {
|
||||
dev_err(di->dev,
|
||||
"gpadc_conversion: set avg samples failed\n");
|
||||
goto out;
|
||||
}
|
||||
/* Enable ADC, Buffering and select rising edge, start Conversion */
|
||||
ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
|
||||
if (ret < 0) {
|
||||
dev_err(di->dev,
|
||||
"gpadc_conversion: select falling edge failed\n");
|
||||
goto out;
|
||||
}
|
||||
ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV);
|
||||
if (ret < 0) {
|
||||
dev_err(di->dev,
|
||||
"gpadc_conversion: start s/w conversion failed\n");
|
||||
goto out;
|
||||
}
|
||||
/* wait for completion of conversion */
|
||||
if (!wait_for_completion_timeout(&di->ab8500_gpadc_complete, 2*HZ)) {
|
||||
dev_err(di->dev,
|
||||
"timeout: didnt recieve GPADC conversion interrupt\n");
|
||||
ret = -EINVAL;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* Read the converted RAW data */
|
||||
ret = abx500_get_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_MANDATAL_REG, &low_data);
|
||||
if (ret < 0) {
|
||||
dev_err(di->dev, "gpadc_conversion: read low data failed\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
ret = abx500_get_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_MANDATAH_REG, &high_data);
|
||||
if (ret < 0) {
|
||||
dev_err(di->dev, "gpadc_conversion: read high data failed\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
data = (high_data << 8) | low_data;
|
||||
/* Disable GPADC */
|
||||
ret = abx500_set_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
|
||||
if (ret < 0) {
|
||||
dev_err(di->dev, "gpadc_conversion: disable gpadc failed\n");
|
||||
goto out;
|
||||
}
|
||||
/* Disable VTVout LDO this is required for GPADC */
|
||||
regulator_disable(di->regu);
|
||||
mutex_unlock(&di->ab8500_gpadc_lock);
|
||||
return data;
|
||||
|
||||
out:
|
||||
/*
|
||||
* It has shown to be needed to turn off the GPADC if an error occurs,
|
||||
* otherwise we might have problem when waiting for the busy bit in the
|
||||
* GPADC status register to go low. In V1.1 there wait_for_completion
|
||||
* seems to timeout when waiting for an interrupt.. Not seen in V2.0
|
||||
*/
|
||||
(void) abx500_set_register_interruptible(di->dev, AB8500_GPADC,
|
||||
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
|
||||
regulator_disable(di->regu);
|
||||
mutex_unlock(&di->ab8500_gpadc_lock);
|
||||
dev_err(di->dev, "gpadc_conversion: Failed to AD convert channel %d\n",
|
||||
input);
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL(ab8500_gpadc_convert);
|
||||
|
||||
/**
|
||||
* ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
|
||||
* @irq: irq number
|
||||
* @data: pointer to the data passed during request irq
|
||||
*
|
||||
* This is a interrupt service routine for s/w gpadc conversion completion.
|
||||
* Notifies the gpadc completion is completed and the converted raw value
|
||||
* can be read from the registers.
|
||||
* Returns IRQ status(IRQ_HANDLED)
|
||||
*/
|
||||
static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_di)
|
||||
{
|
||||
struct ab8500_gpadc *gpadc = _di;
|
||||
|
||||
complete(&gpadc->ab8500_gpadc_complete);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int __devinit ab8500_gpadc_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret = 0;
|
||||
struct ab8500_gpadc *gpadc;
|
||||
|
||||
gpadc = kzalloc(sizeof(struct ab8500_gpadc), GFP_KERNEL);
|
||||
if (!gpadc) {
|
||||
dev_err(&pdev->dev, "Error: No memory\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
gpadc->parent = dev_get_drvdata(pdev->dev.parent);
|
||||
gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END");
|
||||
if (gpadc->irq < 0) {
|
||||
dev_err(gpadc->dev, "failed to get platform irq-%d\n", di->irq);
|
||||
ret = gpadc->irq;
|
||||
goto fail;
|
||||
}
|
||||
|
||||
gpadc->dev = &pdev->dev;
|
||||
mutex_init(&di->ab8500_gpadc_lock);
|
||||
|
||||
/* Initialize completion used to notify completion of conversion */
|
||||
init_completion(&gpadc->ab8500_gpadc_complete);
|
||||
|
||||
/* Register interrupt - SwAdcComplete */
|
||||
ret = request_threaded_irq(gpadc->irq, NULL,
|
||||
ab8500_bm_gpswadcconvend_handler,
|
||||
IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc", gpadc);
|
||||
if (ret < 0) {
|
||||
dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n",
|
||||
gpadc->irq);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
/* VTVout LDO used to power up ab8500-GPADC */
|
||||
gpadc->regu = regulator_get(&pdev->dev, "vddadc");
|
||||
if (IS_ERR(gpadc->regu)) {
|
||||
ret = PTR_ERR(gpadc->regu);
|
||||
dev_err(gpadc->dev, "failed to get vtvout LDO\n");
|
||||
goto fail;
|
||||
}
|
||||
di = gpadc;
|
||||
dev_dbg(gpadc->dev, "probe success\n");
|
||||
return 0;
|
||||
fail:
|
||||
kfree(gpadc);
|
||||
gpadc = NULL;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit ab8500_gpadc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev);
|
||||
|
||||
/* remove interrupt - completion of Sw ADC conversion */
|
||||
free_irq(gpadc->irq, di);
|
||||
/* disable VTVout LDO that is being used by GPADC */
|
||||
regulator_put(gpadc->regu);
|
||||
kfree(gpadc);
|
||||
gpadc = NULL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver ab8500_gpadc_driver = {
|
||||
.probe = ab8500_gpadc_probe,
|
||||
.remove = __devexit_p(ab8500_gpadc_remove),
|
||||
.driver = {
|
||||
.name = "ab8500-gpadc",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init ab8500_gpadc_init(void)
|
||||
{
|
||||
return platform_driver_register(&ab8500_gpadc_driver);
|
||||
}
|
||||
|
||||
static void __exit ab8500_gpadc_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&ab8500_gpadc_driver);
|
||||
}
|
||||
|
||||
subsys_initcall_sync(ab8500_gpadc_init);
|
||||
module_exit(ab8500_gpadc_exit);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_AUTHOR("Arun R Murthy");
|
||||
MODULE_ALIAS("platform:ab8500_gpadc");
|
||||
MODULE_DESCRIPTION("AB8500 GPADC driver");
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
/*
|
||||
* Copyright (C) 2010 ST-Ericsson SA
|
||||
* Licensed under GPLv2.
|
||||
*
|
||||
* Author: Arun R Murthy <arun.murthy@stericsson.com>
|
||||
*/
|
||||
|
||||
#ifndef _AB8500_GPADC_H
|
||||
#define _AB8500_GPADC_H
|
||||
|
||||
/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */
|
||||
#define BAT_CTRL 0x01
|
||||
#define BTEMP_BALL 0x02
|
||||
#define MAIN_CHARGER_V 0x03
|
||||
#define ACC_DETECT1 0x04
|
||||
#define ACC_DETECT2 0x05
|
||||
#define ADC_AUX1 0x06
|
||||
#define ADC_AUX2 0x07
|
||||
#define MAIN_BAT_V 0x08
|
||||
#define VBUS_V 0x09
|
||||
#define MAIN_CHARGER_C 0x0A
|
||||
#define USB_CHARGER_C 0x0B
|
||||
#define BK_BAT_V 0x0C
|
||||
#define DIE_TEMP 0x0D
|
||||
|
||||
int ab8500_gpadc_convert(u8 input);
|
||||
|
||||
#endif /* _AB8500_GPADC_H */
|
||||
Загрузка…
Ссылка в новой задаче