Staging/IIO driver fixes for 4.9-rc3

Here are some small staging and iio driver fixes for reported issues for
 4.9-rc3.  Nothing major, the "largest" being a lustre fix for a sysfs
 file that was obviously wrong, and had never been tested, so it was
 moved to debugfs as that is where it belongs.  The others are small bug
 fixes for reported issues with various staging or iio drivers.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlgU0N8PHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspB1IAmgP4
 nFPbchXqe+xNl6X5P1jlyQYFAJ9f/RIpr0XPDi0Epto5YoO6cs1MDA==
 =xyXG
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small staging and iio driver fixes for reported issues
  for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a
  sysfs file that was obviously wrong, and had never been tested, so it
  was moved to debugfs as that is where it belongs. The others are small
  bug fixes for reported issues with various staging or iio drivers.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  greybus: fix a leak on error in gb_module_create()
  greybus: es2: fix error return code in ap_probe()
  greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state()
  staging: android: ion: Fix error handling in ion_query_heaps()
  iio: accel: sca3000_core: avoid potentially uninitialized variable
  iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
  staging/lustre/llite: Move unstable_stats from sysfs to debugfs
  Staging: wilc1000: Fix kernel Oops on opening the device
  staging: android/ion: testing the wrong variable
  Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev
  Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev
  iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors
  iio: maxim_thermocouple: Align 16 bit big endian value of raw reads

drivers/iio/adc/Kconfig

@@ -437,6 +437,8 @@ config STX104
 config TI_ADC081C
 	tristate "Texas Instruments ADC081C/ADC101C/ADC121C family"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  If you say yes here you get support for Texas Instruments ADC081C,
 	  ADC101C and ADC121C ADC chips.

drivers/iio/chemical/atlas-ph-sensor.c

@@ -213,13 +213,14 @@ static int atlas_check_ec_calibration(struct atlas_data *data)
 	struct device *dev = &data->client->dev;
 	int ret;
 	unsigned int val;
+	__be16	rval;
 
-	ret = regmap_bulk_read(data->regmap, ATLAS_REG_EC_PROBE, &val, 2);
+	ret = regmap_bulk_read(data->regmap, ATLAS_REG_EC_PROBE, &rval, 2);
 	if (ret)
 		return ret;
 
-	dev_info(dev, "probe set to K = %d.%.2d", be16_to_cpu(val) / 100,
-						 be16_to_cpu(val) % 100);
+	val = be16_to_cpu(rval);
+	dev_info(dev, "probe set to K = %d.%.2d", val / 100, val % 100);
 
 	ret = regmap_read(data->regmap, ATLAS_REG_EC_CALIB_STATUS, &val);
 	if (ret)

drivers/iio/temperature/maxim_thermocouple.c

@@ -123,22 +123,24 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data,
 {
 	unsigned int storage_bytes = data->chip->read_size;
 	unsigned int shift = chan->scan_type.shift + (chan->address * 8);
-	unsigned int buf;
+	__be16 buf16;
+	__be32 buf32;
 	int ret;
 
-	ret = spi_read(data->spi, (void *) &buf, storage_bytes);
-	if (ret)
-		return ret;
-
 	switch (storage_bytes) {
 	case 2:
-		*val = be16_to_cpu(buf);
+		ret = spi_read(data->spi, (void *)&buf16, storage_bytes);
+		*val = be16_to_cpu(buf16);
 		break;
 	case 4:
-		*val = be32_to_cpu(buf);
+		ret = spi_read(data->spi, (void *)&buf32, storage_bytes);
+		*val = be32_to_cpu(buf32);
 		break;
 	}
 
+	if (ret)
+		return ret;
+
 	/* check to be sure this is a valid reading */
 	if (*val & data->chip->status_bit)
 		return -EINVAL;

drivers/staging/android/ion/ion.c

@@ -1187,8 +1187,10 @@ int ion_query_heaps(struct ion_client *client, struct ion_heap_query *query)
 		hdata.type = heap->type;
 		hdata.heap_id = heap->id;
 
-		ret = copy_to_user(&buffer[cnt],
-				   &hdata, sizeof(hdata));
+		if (copy_to_user(&buffer[cnt], &hdata, sizeof(hdata))) {
+			ret = -EFAULT;
+			goto out;
+		}
 
 		cnt++;
 		if (cnt >= max_cnt)

drivers/staging/android/ion/ion_of.c

@@ -107,7 +107,7 @@ struct ion_platform_data *ion_parse_dt(struct platform_device *pdev,
 
 		heap_pdev = of_platform_device_create(node, heaps[i].name,
 						      &pdev->dev);
-		if (!pdev)
+		if (!heap_pdev)
 			return ERR_PTR(-ENOMEM);
 		heap_pdev->dev.platform_data = &heaps[i];
 

drivers/staging/greybus/arche-platform.c

@@ -128,6 +128,7 @@ int arche_platform_change_state(enum arche_platform_state state,
 	pdev = of_find_device_by_node(np);
 	if (!pdev) {
 		pr_err("arche-platform device not found\n");
+		of_node_put(np);
 		return -ENODEV;
 	}
 

drivers/staging/greybus/es2.c

@@ -1548,7 +1548,8 @@ static int ap_probe(struct usb_interface *interface,
 	INIT_LIST_HEAD(&es2->arpcs);
 	spin_lock_init(&es2->arpc_lock);
 
-	if (es2_arpc_in_enable(es2))
+	retval = es2_arpc_in_enable(es2);
+	if (retval)
 		goto error;
 
 	retval = gb_hd_add(hd);

drivers/staging/greybus/gpio.c

@@ -702,15 +702,13 @@ static int gb_gpio_probe(struct gbphy_device *gbphy_dev,
 	ret = gb_gpio_irqchip_add(gpio, irqc, 0,
 				   handle_level_irq, IRQ_TYPE_NONE);
 	if (ret) {
-		dev_err(&connection->bundle->dev,
-			"failed to add irq chip: %d\n", ret);
+		dev_err(&gbphy_dev->dev, "failed to add irq chip: %d\n", ret);
 		goto exit_line_free;
 	}
 
 	ret = gpiochip_add(gpio);
 	if (ret) {
-		dev_err(&connection->bundle->dev,
-			"failed to add gpio chip: %d\n", ret);
+		dev_err(&gbphy_dev->dev, "failed to add gpio chip: %d\n", ret);
 		goto exit_gpio_irqchip_remove;
 	}
 

drivers/staging/greybus/module.c

@@ -127,7 +127,7 @@ struct gb_module *gb_module_create(struct gb_host_device *hd, u8 module_id,
 	return module;
 
 err_put_interfaces:
-	for (--i; i > 0; --i)
+	for (--i; i >= 0; --i)
 		gb_interface_put(module->interfaces[i]);
 
 	put_device(&module->dev);

drivers/staging/greybus/uart.c

@@ -888,7 +888,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev,
 	minor = alloc_minor(gb_tty);
 	if (minor < 0) {
 		if (minor == -ENOSPC) {
-			dev_err(&connection->bundle->dev,
+			dev_err(&gbphy_dev->dev,
 				"no more free minor numbers\n");
 			retval = -ENODEV;
 		} else {

drivers/staging/iio/accel/sca3000_core.c

@@ -468,6 +468,8 @@ static inline int __sca3000_get_base_freq(struct sca3000_state *st,
 	case SCA3000_MEAS_MODE_OP_2:
 		*base_freq = info->option_mode_2_freq;
 		break;
+	default:
+		ret = -EINVAL;
 	}
 error_ret:
 	return ret;

drivers/staging/lustre/lustre/llite/lproc_llite.c

@@ -871,12 +871,10 @@ static ssize_t xattr_cache_store(struct kobject *kobj,
 }
 LUSTRE_RW_ATTR(xattr_cache);
 
-static ssize_t unstable_stats_show(struct kobject *kobj,
-				   struct attribute *attr,
-				   char *buf)
+static int ll_unstable_stats_seq_show(struct seq_file *m, void *v)
 {
-	struct ll_sb_info *sbi = container_of(kobj, struct ll_sb_info,
-					      ll_kobj);
+	struct super_block     *sb    = m->private;
+	struct ll_sb_info      *sbi   = ll_s2sbi(sb);
 	struct cl_client_cache *cache = sbi->ll_cache;
 	long pages;
 	int mb;
@@ -884,19 +882,21 @@ static ssize_t unstable_stats_show(struct kobject *kobj,
 	pages = atomic_long_read(&cache->ccc_unstable_nr);
 	mb = (pages * PAGE_SIZE) >> 20;
 
-	return sprintf(buf, "unstable_check:     %8d\n"
-			    "unstable_pages: %12ld\n"
-			    "unstable_mb:        %8d\n",
-			    cache->ccc_unstable_check, pages, mb);
+	seq_printf(m,
+		   "unstable_check:     %8d\n"
+		   "unstable_pages: %12ld\n"
+		   "unstable_mb:        %8d\n",
+		   cache->ccc_unstable_check, pages, mb);
+
+	return 0;
 }
 
-static ssize_t unstable_stats_store(struct kobject *kobj,
-				    struct attribute *attr,
-				    const char *buffer,
-				    size_t count)
+static ssize_t ll_unstable_stats_seq_write(struct file *file,
+					   const char __user *buffer,
+					   size_t count, loff_t *off)
 {
-	struct ll_sb_info *sbi = container_of(kobj, struct ll_sb_info,
-					      ll_kobj);
+	struct super_block *sb = ((struct seq_file *)file->private_data)->private;
+	struct ll_sb_info *sbi = ll_s2sbi(sb);
 	char kernbuf[128];
 	int val, rc;
 
@@ -922,7 +922,7 @@ static ssize_t unstable_stats_store(struct kobject *kobj,
 
 	return count;
 }
-LUSTRE_RW_ATTR(unstable_stats);
+LPROC_SEQ_FOPS(ll_unstable_stats);
 
 static ssize_t root_squash_show(struct kobject *kobj, struct attribute *attr,
 				char *buf)
@@ -995,6 +995,7 @@ static struct lprocfs_vars lprocfs_llite_obd_vars[] = {
 	/* { "filegroups",   lprocfs_rd_filegroups,  0, 0 }, */
 	{ "max_cached_mb",    &ll_max_cached_mb_fops, NULL },
 	{ "statahead_stats",  &ll_statahead_stats_fops, NULL, 0 },
+	{ "unstable_stats",   &ll_unstable_stats_fops, NULL },
 	{ "sbi_flags",	      &ll_sbi_flags_fops, NULL, 0 },
 	{ .name =		"nosquash_nids",
 	  .fops =		&ll_nosquash_nids_fops		},
@@ -1026,7 +1027,6 @@ static struct attribute *llite_attrs[] = {
 	&lustre_attr_max_easize.attr,
 	&lustre_attr_default_easize.attr,
 	&lustre_attr_xattr_cache.attr,
-	&lustre_attr_unstable_stats.attr,
 	&lustre_attr_root_squash.attr,
 	NULL,
 };

drivers/staging/wilc1000/host_interface.c

@@ -3388,7 +3388,6 @@ int wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler)
 
 	clients_count++;
 
-	destroy_workqueue(hif_workqueue);
 _fail_:
 	return result;
 }