scsi: csiostor: update ingress pack and pad boundary value

T5/T6 can have different pack and pad boundary value. This patch sets
packing boundary based on cache line size and PCI-E maximum payload size
and sets smallest padding boundary value.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Varun Prakash 2018-07-17 19:55:26 +05:30 коммит произвёл Martin K. Petersen
Родитель 7ee7ef24d0
Коммит db67befa3d
1 изменённых файлов: 79 добавлений и 5 удалений

Просмотреть файл

@ -39,6 +39,7 @@
#include <asm/page.h>
#include <linux/cache.h>
#include "t4_values.h"
#include "csio_hw.h"
#include "csio_wr.h"
#include "csio_mb.h"
@ -1309,8 +1310,11 @@ csio_wr_fixup_host_params(struct csio_hw *hw)
struct csio_sge *sge = &wrm->sge;
uint32_t clsz = L1_CACHE_BYTES;
uint32_t s_hps = PAGE_SHIFT - 10;
uint32_t ingpad = 0;
uint32_t stat_len = clsz > 64 ? 128 : 64;
u32 fl_align = clsz < 32 ? 32 : clsz;
u32 pack_align;
u32 ingpad, ingpack;
int pcie_cap;
csio_wr_reg32(hw, HOSTPAGESIZEPF0_V(s_hps) | HOSTPAGESIZEPF1_V(s_hps) |
HOSTPAGESIZEPF2_V(s_hps) | HOSTPAGESIZEPF3_V(s_hps) |
@ -1318,14 +1322,82 @@ csio_wr_fixup_host_params(struct csio_hw *hw)
HOSTPAGESIZEPF6_V(s_hps) | HOSTPAGESIZEPF7_V(s_hps),
SGE_HOST_PAGE_SIZE_A);
sge->csio_fl_align = clsz < 32 ? 32 : clsz;
ingpad = ilog2(sge->csio_fl_align) - 5;
/* T5 introduced the separation of the Free List Padding and
* Packing Boundaries. Thus, we can select a smaller Padding
* Boundary to avoid uselessly chewing up PCIe Link and Memory
* Bandwidth, and use a Packing Boundary which is large enough
* to avoid false sharing between CPUs, etc.
*
* For the PCI Link, the smaller the Padding Boundary the
* better. For the Memory Controller, a smaller Padding
* Boundary is better until we cross under the Memory Line
* Size (the minimum unit of transfer to/from Memory). If we
* have a Padding Boundary which is smaller than the Memory
* Line Size, that'll involve a Read-Modify-Write cycle on the
* Memory Controller which is never good.
*/
/* We want the Packing Boundary to be based on the Cache Line
* Size in order to help avoid False Sharing performance
* issues between CPUs, etc. We also want the Packing
* Boundary to incorporate the PCI-E Maximum Payload Size. We
* get best performance when the Packing Boundary is a
* multiple of the Maximum Payload Size.
*/
pack_align = fl_align;
pcie_cap = pci_find_capability(hw->pdev, PCI_CAP_ID_EXP);
if (pcie_cap) {
u32 mps, mps_log;
u16 devctl;
/* The PCIe Device Control Maximum Payload Size field
* [bits 7:5] encodes sizes as powers of 2 starting at
* 128 bytes.
*/
pci_read_config_word(hw->pdev,
pcie_cap + PCI_EXP_DEVCTL,
&devctl);
mps_log = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5) + 7;
mps = 1 << mps_log;
if (mps > pack_align)
pack_align = mps;
}
/* T5/T6 have a special interpretation of the "0"
* value for the Packing Boundary. This corresponds to 16
* bytes instead of the expected 32 bytes.
*/
if (pack_align <= 16) {
ingpack = INGPACKBOUNDARY_16B_X;
fl_align = 16;
} else if (pack_align == 32) {
ingpack = INGPACKBOUNDARY_64B_X;
fl_align = 64;
} else {
u32 pack_align_log = fls(pack_align) - 1;
ingpack = pack_align_log - INGPACKBOUNDARY_SHIFT_X;
fl_align = pack_align;
}
/* Use the smallest Ingress Padding which isn't smaller than
* the Memory Controller Read/Write Size. We'll take that as
* being 8 bytes since we don't know of any system with a
* wider Memory Controller Bus Width.
*/
if (csio_is_t5(hw->pdev->device & CSIO_HW_CHIP_MASK))
ingpad = INGPADBOUNDARY_32B_X;
else
ingpad = T6_INGPADBOUNDARY_8B_X;
csio_set_reg_field(hw, SGE_CONTROL_A,
INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
EGRSTATUSPAGESIZE_F,
INGPADBOUNDARY_V(ingpad) |
EGRSTATUSPAGESIZE_V(stat_len != 64));
csio_set_reg_field(hw, SGE_CONTROL2_A,
INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
INGPACKBOUNDARY_V(ingpack));
/* FL BUFFER SIZE#0 is Page size i,e already aligned to cache line */
csio_wr_reg32(hw, PAGE_SIZE, SGE_FL_BUFFER_SIZE0_A);
@ -1337,14 +1409,16 @@ csio_wr_fixup_host_params(struct csio_hw *hw)
if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS) {
csio_wr_reg32(hw,
(csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE2_A) +
sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
fl_align - 1) & ~(fl_align - 1),
SGE_FL_BUFFER_SIZE2_A);
csio_wr_reg32(hw,
(csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE3_A) +
sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
fl_align - 1) & ~(fl_align - 1),
SGE_FL_BUFFER_SIZE3_A);
}
sge->csio_fl_align = fl_align;
csio_wr_reg32(hw, HPZ0_V(PAGE_SHIFT - 12), ULP_RX_TDDP_PSZ_A);
/* default value of rx_dma_offset of the NIC driver */