leds-lp5523: use generic firmware interface
LP55xx common driver provides generic firmware interface for running a LED pattern. LP5521 and LP5523 have many device attributes for running patterns. This patch cleans up those complex code. Removed device attributes: engine1_mode engine2_mode engine3_mode engine1_load engine2_load engine3_load engine1_leds engine2_leds engine3_leds All device attributes and functions are replaced with two callback functions, 'firmware_cb' and 'run_engine'. New engine functions: lp5523_load/stop/run_engine(), lp5523_update_program_memory() and lp5523_wait_opmode_done() Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
This commit is contained in:
Milo(Woogyom) Kim
Bryan Wu
Родитель
9ce7cb170f
Коммит
db6eaf8388
|
|
@ -35,6 +35,7 @@
|
|||
#include <linux/workqueue.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/platform_data/leds-lp55xx.h>
|
||||
#include <linux/firmware.h>
|
||||
|
||||
#include "leds-lp55xx-common.h"
|
||||
|
||||
|
|
@ -108,20 +109,39 @@
|
|||
#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
|
||||
#define SHIFT_MASK(id) (((id) - 1) * 2)
|
||||
|
||||
/* Memory Page Selection */
|
||||
#define LP5523_PAGE_ENG1 0
|
||||
#define LP5523_PAGE_ENG2 1
|
||||
#define LP5523_PAGE_ENG3 2
|
||||
|
||||
/* Program Memory Operations */
|
||||
#define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */
|
||||
#define LP5523_MODE_ENG2_M 0x0C
|
||||
#define LP5523_MODE_ENG3_M 0x03
|
||||
#define LP5523_LOAD_ENG1 0x10
|
||||
#define LP5523_LOAD_ENG2 0x04
|
||||
#define LP5523_LOAD_ENG3 0x01
|
||||
|
||||
#define LP5523_ENG1_IS_LOADING(mode) \
|
||||
((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
|
||||
#define LP5523_ENG2_IS_LOADING(mode) \
|
||||
((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
|
||||
#define LP5523_ENG3_IS_LOADING(mode) \
|
||||
((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
|
||||
|
||||
#define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */
|
||||
#define LP5523_EXEC_ENG2_M 0x0C
|
||||
#define LP5523_EXEC_ENG3_M 0x03
|
||||
#define LP5523_EXEC_M 0x3F
|
||||
#define LP5523_RUN_ENG1 0x20
|
||||
#define LP5523_RUN_ENG2 0x08
|
||||
#define LP5523_RUN_ENG3 0x02
|
||||
|
||||
enum lp5523_chip_id {
|
||||
LP5523,
|
||||
LP55231,
|
||||
};
|
||||
|
||||
struct lp5523_engine {
|
||||
int id;
|
||||
u8 mode;
|
||||
u8 prog_page;
|
||||
u8 mux_page;
|
||||
u16 led_mux;
|
||||
u8 engine_mask;
|
||||
};
|
||||
|
||||
struct lp5523_led {
|
||||
int id;
|
||||
u8 chan_nr;
|
||||
|
|
@ -135,13 +155,17 @@ struct lp5523_led {
|
|||
struct lp5523_chip {
|
||||
struct mutex lock; /* Serialize control */
|
||||
struct i2c_client *client;
|
||||
struct lp5523_engine engines[LP5523_ENGINES];
|
||||
struct lp5523_led leds[LP5523_MAX_LEDS];
|
||||
struct lp5523_platform_data *pdata;
|
||||
u8 num_channels;
|
||||
u8 num_leds;
|
||||
};
|
||||
|
||||
static inline void lp5523_wait_opmode_done(void)
|
||||
{
|
||||
usleep_range(1000, 2000);
|
||||
}
|
||||
|
||||
static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
|
||||
{
|
||||
led->led_current = led_current;
|
||||
|
|
@ -149,27 +173,6 @@ static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
|
|||
led_current);
|
||||
}
|
||||
|
||||
static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
|
||||
{
|
||||
return container_of(cdev, struct lp5523_led, cdev);
|
||||
}
|
||||
|
||||
static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
|
||||
{
|
||||
return container_of(engine, struct lp5523_chip,
|
||||
engines[engine->id - 1]);
|
||||
}
|
||||
|
||||
static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
|
||||
{
|
||||
return container_of(led, struct lp5523_chip,
|
||||
leds[led->id]);
|
||||
}
|
||||
|
||||
static void lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
|
||||
static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
|
||||
static int lp5523_load_program(struct lp5523_engine *engine, const u8 *pattern);
|
||||
|
||||
static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
|
||||
{
|
||||
return i2c_smbus_write_byte_data(client, reg, value);
|
||||
|
|
@ -212,178 +215,163 @@ static int lp5523_post_init_device(struct lp55xx_chip *chip)
|
|||
return lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
|
||||
}
|
||||
|
||||
static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
|
||||
static void lp5523_load_engine(struct lp55xx_chip *chip)
|
||||
{
|
||||
struct lp5523_chip *chip = engine_to_lp5523(engine);
|
||||
struct i2c_client *client = chip->client;
|
||||
int ret;
|
||||
u8 engine_state;
|
||||
enum lp55xx_engine_index idx = chip->engine_idx;
|
||||
u8 mask[] = {
|
||||
[LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
|
||||
[LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
|
||||
[LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
|
||||
};
|
||||
|
||||
ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
|
||||
if (ret)
|
||||
goto fail;
|
||||
u8 val[] = {
|
||||
[LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
|
||||
[LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
|
||||
[LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
|
||||
};
|
||||
|
||||
engine_state &= ~(engine->engine_mask);
|
||||
u8 page_sel[] = {
|
||||
[LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
|
||||
[LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
|
||||
[LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
|
||||
};
|
||||
|
||||
/* set mode only for this engine */
|
||||
mode &= engine->engine_mask;
|
||||
lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
|
||||
|
||||
engine_state |= mode;
|
||||
lp5523_wait_opmode_done();
|
||||
|
||||
ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
|
||||
fail:
|
||||
return ret;
|
||||
lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
|
||||
}
|
||||
|
||||
static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
|
||||
static void lp5523_stop_engine(struct lp55xx_chip *chip)
|
||||
{
|
||||
struct lp5523_chip *chip = engine_to_lp5523(engine);
|
||||
struct i2c_client *client = chip->client;
|
||||
int ret = 0;
|
||||
|
||||
ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
|
||||
|
||||
ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
|
||||
ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
|
||||
(u8)(mux >> 8));
|
||||
ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
|
||||
engine->led_mux = mux;
|
||||
|
||||
return ret;
|
||||
lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
|
||||
lp5523_wait_opmode_done();
|
||||
}
|
||||
|
||||
static int lp5523_load_program(struct lp5523_engine *engine, const u8 *pattern)
|
||||
{
|
||||
struct lp5523_chip *chip = engine_to_lp5523(engine);
|
||||
struct i2c_client *client = chip->client;
|
||||
|
||||
int ret = 0;
|
||||
|
||||
ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
|
||||
|
||||
ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
|
||||
engine->prog_page);
|
||||
ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
|
||||
LP5523_PROGRAM_LENGTH, pattern);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lp5523_run_program(struct lp5523_engine *engine)
|
||||
{
|
||||
struct lp5523_chip *chip = engine_to_lp5523(engine);
|
||||
struct i2c_client *client = chip->client;
|
||||
int ret;
|
||||
|
||||
ret = lp5523_write(client, LP5523_REG_ENABLE,
|
||||
LP5523_CMD_RUN | LP5523_ENABLE);
|
||||
if (ret)
|
||||
goto fail;
|
||||
|
||||
ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
|
||||
fail:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
|
||||
static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
|
||||
{
|
||||
int i;
|
||||
u16 tmp_mux = 0;
|
||||
|
||||
len = min_t(int, len, LP5523_MAX_LEDS);
|
||||
for (i = 0; i < len; i++) {
|
||||
switch (buf[i]) {
|
||||
case '1':
|
||||
tmp_mux |= (1 << i);
|
||||
break;
|
||||
case '0':
|
||||
break;
|
||||
case '\n':
|
||||
i = len;
|
||||
break;
|
||||
default:
|
||||
return -1;
|
||||
}
|
||||
for (i = 0; i < LP5523_MAX_LEDS; i++)
|
||||
lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
|
||||
}
|
||||
|
||||
static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
|
||||
{
|
||||
int ret;
|
||||
u8 mode;
|
||||
u8 exec;
|
||||
|
||||
/* stop engine */
|
||||
if (!start) {
|
||||
lp5523_stop_engine(chip);
|
||||
lp5523_turn_off_channels(chip);
|
||||
return;
|
||||
}
|
||||
*mux = tmp_mux;
|
||||
|
||||
/*
|
||||
* To run the engine,
|
||||
* operation mode and enable register should updated at the same time
|
||||
*/
|
||||
|
||||
ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
|
||||
if (ret)
|
||||
return;
|
||||
|
||||
ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
|
||||
if (ret)
|
||||
return;
|
||||
|
||||
/* change operation mode to RUN only when each engine is loading */
|
||||
if (LP5523_ENG1_IS_LOADING(mode)) {
|
||||
mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
|
||||
exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
|
||||
}
|
||||
|
||||
if (LP5523_ENG2_IS_LOADING(mode)) {
|
||||
mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
|
||||
exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
|
||||
}
|
||||
|
||||
if (LP5523_ENG3_IS_LOADING(mode)) {
|
||||
mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
|
||||
exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
|
||||
}
|
||||
|
||||
lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
|
||||
lp5523_wait_opmode_done();
|
||||
|
||||
lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
|
||||
}
|
||||
|
||||
static int lp5523_update_program_memory(struct lp55xx_chip *chip,
|
||||
const u8 *data, size_t size)
|
||||
{
|
||||
u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
|
||||
unsigned cmd;
|
||||
char c[3];
|
||||
int update_size;
|
||||
int nrchars;
|
||||
int offset = 0;
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
/* clear program memory before updating */
|
||||
for (i = 0; i < LP5523_PROGRAM_LENGTH; i++)
|
||||
lp55xx_write(chip, LP5523_REG_PROG_MEM + i, 0);
|
||||
|
||||
i = 0;
|
||||
while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
|
||||
/* separate sscanfs because length is working only for %s */
|
||||
ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
|
||||
if (ret != 1)
|
||||
goto err;
|
||||
|
||||
ret = sscanf(c, "%2x", &cmd);
|
||||
if (ret != 1)
|
||||
goto err;
|
||||
|
||||
pattern[i] = (u8)cmd;
|
||||
offset += nrchars;
|
||||
i++;
|
||||
}
|
||||
|
||||
/* Each instruction is 16bit long. Check that length is even */
|
||||
if (i % 2)
|
||||
goto err;
|
||||
|
||||
update_size = i;
|
||||
for (i = 0; i < update_size; i++)
|
||||
lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
dev_err(&chip->cl->dev, "wrong pattern format\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static void lp5523_mux_to_array(u16 led_mux, char *array)
|
||||
static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
|
||||
{
|
||||
int i, pos = 0;
|
||||
for (i = 0; i < LP5523_MAX_LEDS; i++)
|
||||
pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
|
||||
const struct firmware *fw = chip->fw;
|
||||
|
||||
array[pos] = '\0';
|
||||
if (fw->size > LP5523_PROGRAM_LENGTH) {
|
||||
dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
|
||||
fw->size);
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Program momery sequence
|
||||
* 1) set engine mode to "LOAD"
|
||||
* 2) write firmware data into program memory
|
||||
*/
|
||||
|
||||
lp5523_load_engine(chip);
|
||||
lp5523_update_program_memory(chip, fw->data, fw->size);
|
||||
}
|
||||
|
||||
/*--------------------------------------------------------------*/
|
||||
/* Sysfs interface */
|
||||
/*--------------------------------------------------------------*/
|
||||
|
||||
static ssize_t show_engine_leds(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf, int nr)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct lp5523_chip *chip = i2c_get_clientdata(client);
|
||||
char mux[LP5523_MAX_LEDS + 1];
|
||||
|
||||
lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
|
||||
|
||||
return sprintf(buf, "%s\n", mux);
|
||||
}
|
||||
|
||||
#define show_leds(nr) \
|
||||
static ssize_t show_engine##nr##_leds(struct device *dev, \
|
||||
struct device_attribute *attr, \
|
||||
char *buf) \
|
||||
{ \
|
||||
return show_engine_leds(dev, attr, buf, nr); \
|
||||
}
|
||||
show_leds(1)
|
||||
show_leds(2)
|
||||
show_leds(3)
|
||||
|
||||
static ssize_t store_engine_leds(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t len, int nr)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct lp5523_chip *chip = i2c_get_clientdata(client);
|
||||
u16 mux = 0;
|
||||
ssize_t ret;
|
||||
|
||||
if (lp5523_mux_parse(buf, &mux, len))
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&chip->lock);
|
||||
ret = -EINVAL;
|
||||
if (chip->engines[nr - 1].mode != LP5523_CMD_LOAD)
|
||||
goto leave;
|
||||
|
||||
if (lp5523_load_mux(&chip->engines[nr - 1], mux))
|
||||
goto leave;
|
||||
|
||||
ret = len;
|
||||
leave:
|
||||
mutex_unlock(&chip->lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define store_leds(nr) \
|
||||
static ssize_t store_engine##nr##_leds(struct device *dev, \
|
||||
struct device_attribute *attr, \
|
||||
const char *buf, size_t len) \
|
||||
{ \
|
||||
return store_engine_leds(dev, attr, buf, len, nr); \
|
||||
}
|
||||
store_leds(1)
|
||||
store_leds(2)
|
||||
store_leds(3)
|
||||
|
||||
static ssize_t lp5523_selftest(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
|
|
@ -485,159 +473,10 @@ static void lp5523_led_brightness_work(struct work_struct *work)
|
|||
mutex_unlock(&chip->lock);
|
||||
}
|
||||
|
||||
static int lp5523_do_store_load(struct lp5523_engine *engine,
|
||||
const char *buf, size_t len)
|
||||
{
|
||||
struct lp5523_chip *chip = engine_to_lp5523(engine);
|
||||
struct i2c_client *client = chip->client;
|
||||
int ret, nrchars, offset = 0, i = 0;
|
||||
char c[3];
|
||||
unsigned cmd;
|
||||
u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
|
||||
|
||||
if (engine->mode != LP5523_CMD_LOAD)
|
||||
return -EINVAL;
|
||||
|
||||
while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
|
||||
/* separate sscanfs because length is working only for %s */
|
||||
ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
|
||||
ret = sscanf(c, "%2x", &cmd);
|
||||
if (ret != 1)
|
||||
goto fail;
|
||||
pattern[i] = (u8)cmd;
|
||||
|
||||
offset += nrchars;
|
||||
i++;
|
||||
}
|
||||
|
||||
/* Each instruction is 16bit long. Check that length is even */
|
||||
if (i % 2)
|
||||
goto fail;
|
||||
|
||||
mutex_lock(&chip->lock);
|
||||
ret = lp5523_load_program(engine, pattern);
|
||||
mutex_unlock(&chip->lock);
|
||||
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "failed loading pattern\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
return len;
|
||||
fail:
|
||||
dev_err(&client->dev, "wrong pattern format\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static ssize_t store_engine_load(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t len, int nr)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct lp5523_chip *chip = i2c_get_clientdata(client);
|
||||
return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
|
||||
}
|
||||
|
||||
#define store_load(nr) \
|
||||
static ssize_t store_engine##nr##_load(struct device *dev, \
|
||||
struct device_attribute *attr, \
|
||||
const char *buf, size_t len) \
|
||||
{ \
|
||||
return store_engine_load(dev, attr, buf, len, nr); \
|
||||
}
|
||||
store_load(1)
|
||||
store_load(2)
|
||||
store_load(3)
|
||||
|
||||
static ssize_t show_engine_mode(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf, int nr)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct lp5523_chip *chip = i2c_get_clientdata(client);
|
||||
switch (chip->engines[nr - 1].mode) {
|
||||
case LP5523_CMD_RUN:
|
||||
return sprintf(buf, "run\n");
|
||||
case LP5523_CMD_LOAD:
|
||||
return sprintf(buf, "load\n");
|
||||
case LP5523_CMD_DISABLED:
|
||||
return sprintf(buf, "disabled\n");
|
||||
default:
|
||||
return sprintf(buf, "disabled\n");
|
||||
}
|
||||
}
|
||||
|
||||
#define show_mode(nr) \
|
||||
static ssize_t show_engine##nr##_mode(struct device *dev, \
|
||||
struct device_attribute *attr, \
|
||||
char *buf) \
|
||||
{ \
|
||||
return show_engine_mode(dev, attr, buf, nr); \
|
||||
}
|
||||
show_mode(1)
|
||||
show_mode(2)
|
||||
show_mode(3)
|
||||
|
||||
static ssize_t store_engine_mode(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t len, int nr)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct lp5523_chip *chip = i2c_get_clientdata(client);
|
||||
struct lp5523_engine *engine = &chip->engines[nr - 1];
|
||||
mutex_lock(&chip->lock);
|
||||
|
||||
if (!strncmp(buf, "run", 3))
|
||||
lp5523_set_mode(engine, LP5523_CMD_RUN);
|
||||
else if (!strncmp(buf, "load", 4))
|
||||
lp5523_set_mode(engine, LP5523_CMD_LOAD);
|
||||
else if (!strncmp(buf, "disabled", 8))
|
||||
lp5523_set_mode(engine, LP5523_CMD_DISABLED);
|
||||
|
||||
mutex_unlock(&chip->lock);
|
||||
return len;
|
||||
}
|
||||
|
||||
#define store_mode(nr) \
|
||||
static ssize_t store_engine##nr##_mode(struct device *dev, \
|
||||
struct device_attribute *attr, \
|
||||
const char *buf, size_t len) \
|
||||
{ \
|
||||
return store_engine_mode(dev, attr, buf, len, nr); \
|
||||
}
|
||||
store_mode(1)
|
||||
store_mode(2)
|
||||
store_mode(3)
|
||||
|
||||
/* device attributes */
|
||||
static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR,
|
||||
show_engine1_mode, store_engine1_mode);
|
||||
static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR,
|
||||
show_engine2_mode, store_engine2_mode);
|
||||
static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR,
|
||||
show_engine3_mode, store_engine3_mode);
|
||||
static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUSR,
|
||||
show_engine1_leds, store_engine1_leds);
|
||||
static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUSR,
|
||||
show_engine2_leds, store_engine2_leds);
|
||||
static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUSR,
|
||||
show_engine3_leds, store_engine3_leds);
|
||||
static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load);
|
||||
static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
|
||||
static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
|
||||
static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
|
||||
|
||||
static struct attribute *lp5523_attributes[] = {
|
||||
&dev_attr_engine1_mode.attr,
|
||||
&dev_attr_engine2_mode.attr,
|
||||
&dev_attr_engine3_mode.attr,
|
||||
&dev_attr_selftest.attr,
|
||||
&dev_attr_engine1_load.attr,
|
||||
&dev_attr_engine1_leds.attr,
|
||||
&dev_attr_engine2_load.attr,
|
||||
&dev_attr_engine2_leds.attr,
|
||||
&dev_attr_engine3_load.attr,
|
||||
&dev_attr_engine3_leds.attr,
|
||||
NULL,
|
||||
};
|
||||
|
||||
|
|
@ -664,36 +503,6 @@ static void lp5523_unregister_sysfs(struct i2c_client *client)
|
|||
sysfs_remove_group(&dev->kobj, &lp5523_group);
|
||||
}
|
||||
|
||||
/*--------------------------------------------------------------*/
|
||||
/* Set chip operating mode */
|
||||
/*--------------------------------------------------------------*/
|
||||
static void lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
|
||||
{
|
||||
/* if in that mode already do nothing, except for run */
|
||||
if (mode == engine->mode && mode != LP5523_CMD_RUN)
|
||||
return;
|
||||
|
||||
switch (mode) {
|
||||
case LP5523_CMD_RUN:
|
||||
lp5523_run_program(engine);
|
||||
break;
|
||||
case LP5523_CMD_LOAD:
|
||||
lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
|
||||
lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
|
||||
break;
|
||||
case LP5523_CMD_DISABLED:
|
||||
lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
engine->mode = mode;
|
||||
}
|
||||
|
||||
/*--------------------------------------------------------------*/
|
||||
/* Probe, Attach, Remove */
|
||||
/*--------------------------------------------------------------*/
|
||||
/* Chip specific configurations */
|
||||
static struct lp55xx_device_config lp5523_cfg = {
|
||||
.reset = {
|
||||
|
|
@ -708,6 +517,8 @@ static struct lp55xx_device_config lp5523_cfg = {
|
|||
.post_init_device = lp5523_post_init_device,
|
||||
.brightness_work_fn = lp5523_led_brightness_work,
|
||||
.set_led_current = lp5523_set_led_current,
|
||||
.firmware_cb = lp5523_firmware_loaded,
|
||||
.run_engine = lp5523_run_engine,
|
||||
};
|
||||
|
||||
static int lp5523_probe(struct i2c_client *client,
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче