Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a few drivers have been updated to use flexible-array syntax instead
   of GCC extension

 - ili210x touchscreen driver now supports the 2120 protocol flavor

 - a couple more of Synaptics devices have been switched over to RMI4

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cyapa - replace zero-length array with flexible-array member
  Input: tca6416-keypad - replace zero-length array with flexible-array member
  Input: gpio_keys_polled - replace zero-length array with flexible-array member
  Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
  Input: synaptics - enable SMBus on ThinkPad L470
  Input: synaptics - switch T470s to RMI4 by default
  Input: gpio_keys - replace zero-length array with flexible-array member
  Input: goldfish_events - replace zero-length array with flexible-array member
  Input: psmouse - switch to using i2c_new_scanned_device()
  Input: ili210x - add ili2120 support
  Input: ili210x - fix return value of is_visible function

Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt

@@ -1,9 +1,10 @@
-Ilitek ILI210x/ILI2117/ILI251x touchscreen controller
+Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
 
 Required properties:
 - compatible:
     ilitek,ili210x for ILI210x
     ilitek,ili2117 for ILI2117
+    ilitek,ili2120 for ILI2120
     ilitek,ili251x for ILI251x
 
 - reg: The I2C address of the device

drivers/input/keyboard/goldfish_events.c

@@ -30,7 +30,7 @@ struct event_dev {
 	struct input_dev *input;
 	int irq;
 	void __iomem *addr;
-	char name[0];
+	char name[];
 };
 
 static irqreturn_t events_interrupt(int irq, void *dev_id)

drivers/input/keyboard/gpio_keys.c

@@ -55,7 +55,7 @@ struct gpio_keys_drvdata {
 	struct input_dev *input;
 	struct mutex disable_lock;
 	unsigned short *keymap;
-	struct gpio_button_data data[0];
+	struct gpio_button_data data[];
 };
 
 /*

drivers/input/keyboard/gpio_keys_polled.c

@@ -38,7 +38,7 @@ struct gpio_keys_polled_dev {
 	const struct gpio_keys_platform_data *pdata;
 	unsigned long rel_axis_seen[BITS_TO_LONGS(REL_CNT)];
 	unsigned long abs_axis_seen[BITS_TO_LONGS(ABS_CNT)];
-	struct gpio_keys_button_data data[0];
+	struct gpio_keys_button_data data[];
 };
 
 static void gpio_keys_button_event(struct input_dev *input,

drivers/input/keyboard/tca6416-keypad.c

@@ -33,7 +33,7 @@ MODULE_DEVICE_TABLE(i2c, tca6416_id);
 
 struct tca6416_drv_data {
 	struct input_dev *input;
-	struct tca6416_button data[0];
+	struct tca6416_button data[];
 };
 
 struct tca6416_keypad_chip {
@@ -48,7 +48,7 @@ struct tca6416_keypad_chip {
 	int irqnum;
 	u16 pinmask;
 	bool use_polling;
-	struct tca6416_button buttons[0];
+	struct tca6416_button buttons[];
 };
 
 static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val)

drivers/input/mouse/cyapa_gen5.c

@@ -250,7 +250,7 @@ struct cyapa_tsg_bin_image_data_record {
 
 struct cyapa_tsg_bin_image {
 	struct cyapa_tsg_bin_image_head image_head;
-	struct cyapa_tsg_bin_image_data_record records[0];
+	struct cyapa_tsg_bin_image_data_record records[];
 } __packed;
 
 struct pip_bl_packet_start {
@@ -271,7 +271,7 @@ struct pip_bl_cmd_head {
 	u8 report_id;  /* Bootloader output report id, must be 40h */
 	u8 rsvd;  /* Reserved, must be 0 */
 	struct pip_bl_packet_start packet_start;
-	u8 data[0];  /* Command data variable based on commands */
+	u8 data[];  /* Command data variable based on commands */
 } __packed;
 
 /* Initiate bootload command data structure. */
@@ -300,7 +300,7 @@ struct tsg_bl_metadata_row_params {
 struct tsg_bl_flash_row_head {
 	u8 flash_array_id;
 	__le16 flash_row_id;
-	u8 flash_data[0];
+	u8 flash_data[];
 } __packed;
 
 struct pip_app_cmd_head {
@@ -314,7 +314,7 @@ struct pip_app_cmd_head {
 	 * Bit 6-0: command code.
 	 */
 	u8 cmd_code;
-	u8 parameter_data[0];  /* Parameter data variable based on cmd_code */
+	u8 parameter_data[];  /* Parameter data variable based on cmd_code */
 } __packed;
 
 /* Application get/set parameter command data structure */

drivers/input/mouse/psmouse-smbus.c

@@ -190,6 +190,7 @@ static int psmouse_smbus_create_companion(struct device *dev, void *data)
 	struct psmouse_smbus_dev *smbdev = data;
 	unsigned short addr_list[] = { smbdev->board.addr, I2C_CLIENT_END };
 	struct i2c_adapter *adapter;
+	struct i2c_client *client;
 
 	adapter = i2c_verify_adapter(dev);
 	if (!adapter)
@@ -198,12 +199,13 @@ static int psmouse_smbus_create_companion(struct device *dev, void *data)
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HOST_NOTIFY))
 		return 0;
 
-	smbdev->client = i2c_new_probed_device(adapter, &smbdev->board,
-					       addr_list, NULL);
-	if (!smbdev->client)
+	client = i2c_new_scanned_device(adapter, &smbdev->board,
+					addr_list, NULL);
+	if (IS_ERR(client))
 		return 0;
 
 	/* We have our(?) device, stop iterating i2c bus. */
+	smbdev->client = client;
 	return 1;
 }
 

drivers/input/mouse/synaptics.c

@@ -146,7 +146,6 @@ static const char * const topbuttonpad_pnp_ids[] = {
 	"LEN0042", /* Yoga */
 	"LEN0045",
 	"LEN0047",
-	"LEN0049",
 	"LEN2000", /* S540 */
 	"LEN2001", /* Edge E431 */
 	"LEN2002", /* Edge E531 */
@@ -166,9 +165,11 @@ static const char * const smbus_pnp_ids[] = {
 	/* all of the topbuttonpad_pnp_ids are valid, we just add some extras */
 	"LEN0048", /* X1 Carbon 3 */
 	"LEN0046", /* X250 */
+	"LEN0049", /* Yoga 11e */
 	"LEN004a", /* W541 */
 	"LEN005b", /* P50 */
 	"LEN005e", /* T560 */
+	"LEN006c", /* T470s */
 	"LEN0071", /* T480 */
 	"LEN0072", /* X1 Carbon Gen 5 (2017) - Elan/ALPS trackpoint */
 	"LEN0073", /* X1 Carbon G5 (Elantech) */
@@ -179,6 +180,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN0097", /* X280 -> ALPS trackpoint */
 	"LEN009b", /* T580 */
 	"LEN200f", /* T450s */
+	"LEN2044", /* L470  */
 	"LEN2054", /* E480 */
 	"LEN2055", /* E580 */
 	"SYN3052", /* HP EliteBook 840 G4 */

drivers/input/touchscreen/ili210x.c

@@ -167,6 +167,36 @@ static const struct ili2xxx_chip ili211x_chip = {
 	.resolution		= 2048,
 };
 
+static bool ili212x_touchdata_to_coords(const u8 *touchdata,
+					unsigned int finger,
+					unsigned int *x, unsigned int *y)
+{
+	u16 val;
+
+	val = get_unaligned_be16(touchdata + 3 + (finger * 5) + 0);
+	if (!(val & BIT(15)))	/* Touch indication */
+		return false;
+
+	*x = val & 0x3fff;
+	*y = get_unaligned_be16(touchdata + 3 + (finger * 5) + 2);
+
+	return true;
+}
+
+static bool ili212x_check_continue_polling(const u8 *data, bool touch)
+{
+	return touch;
+}
+
+static const struct ili2xxx_chip ili212x_chip = {
+	.read_reg		= ili210x_read_reg,
+	.get_touch_data		= ili210x_read_touch_data,
+	.parse_touch_data	= ili212x_touchdata_to_coords,
+	.continue_polling	= ili212x_check_continue_polling,
+	.max_touches		= 10,
+	.has_calibrate_reg	= true,
+};
+
 static int ili251x_read_reg(struct i2c_client *client,
 			    u8 reg, void *buf, size_t len)
 {
@@ -321,7 +351,7 @@ static umode_t ili210x_calibrate_visible(struct kobject *kobj,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct ili210x *priv = i2c_get_clientdata(client);
 
-	return priv->chip->has_calibrate_reg;
+	return priv->chip->has_calibrate_reg ? attr->mode : 0;
 }
 
 static const struct attribute_group ili210x_attr_group = {
@@ -447,6 +477,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 static const struct i2c_device_id ili210x_i2c_id[] = {
 	{ "ili210x", (long)&ili210x_chip },
 	{ "ili2117", (long)&ili211x_chip },
+	{ "ili2120", (long)&ili212x_chip },
 	{ "ili251x", (long)&ili251x_chip },
 	{ }
 };
@@ -455,6 +486,7 @@ MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id);
 static const struct of_device_id ili210x_dt_ids[] = {
 	{ .compatible = "ilitek,ili210x", .data = &ili210x_chip },
 	{ .compatible = "ilitek,ili2117", .data = &ili211x_chip },
+	{ .compatible = "ilitek,ili2120", .data = &ili212x_chip },
 	{ .compatible = "ilitek,ili251x", .data = &ili251x_chip },
 	{ }
 };