platform-drivers-x86 for v5.7-1

* Fix for improper handling of fan_boost_mode in sysfs for ASUS laptops. * On newer ASUS laptops the 1st battery is named differently, here is a fix. * Fix Lex 2I385SW to allow both network cards to be used. * The power integrated circuit driver for Surface 3 has been added. * Refactor and clean up of Intel PMC driver and enable it on Intel Jasper Lake. * Clean up of Dell RBU driver. * Big update for Intel Speed Select technology support tool and driver. The following is an automated git shortlog grouped by driver: asus-wmi: - Support laptops where the first battery is named BATT - Fix return value of fan_boost_mode_store dell_rbu: - Unify format of the printed messages - Use max_t() to get rid of casting - Simplify cleanup code in create_packet() - don't open code list_for_each_entry*() - Use sysfs_create_group() API GPD pocket fan: - Fix error message when temp-limits are out of range i2c-multi-instantiate: - Replace zero-length array with flexible-array member intel-hid: - Move MODULE_DEVICE_TABLE() closer to the table intel_pmc_core: - Make pmc_core_substate_res_show() generic - Make pmc_core_lpm_display() generic for platforms that support sub-states - Add slp_s0_offset attribute back to tgl_reg_map - Remove duplicate 'if' to create debugfs entry - Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS - Add debugfs support to access live status registers - Dump low power status registers on an S0ix.y failure - Add an additional parameter to pmc_core_lpm_display() - Remove slp_s0 attributes from tgl_reg_map - Refactor the driver by removing redundant code - Add debugfs entry for low power mode status registers - Add debugfs entry to access sub-state residencies - Add Atom based Jasper Lake (JSL) platform support intel-vbtn: - Move MODULE_DEVICE_TABLE() closer to the table ISST: - Fix wrong unregister type PDx86: - Kconfig: Fix a typo - Kconfig: Group modules by companies and functions - MAINTAINERS: Sort entries in database for PDx86 - Makefile: Group modules by companies and functions platform/x86/intel-uncore-freq: - Add release callback - Fix static checker issue and potential race condition pmc_atom: - Add Lex 2I385SW to critclk_systems DMI table sony-laptop: - Use scnprintf() for avoiding potential buffer overflow surface3_power: - Fix always true condition in mshw0011_space_handler() - Fix Kconfig section ordering - Add missed headers - Reformat GUID assignment - Drop useless macro ACPI_PTR() - Prefix POLL_INTERVAL with SURFACE_3 - Simplify mshw0011_adp_psr() to one liner - Use dev_err() instead of pr_err() - Drop unused structure definition - MSHW0011 rev-eng implementation tools/power/x86/intel-speed-select: - Fix a typo in error message - Update version - Avoid duplicate Package strings for json - Add display for enabled cpus count - Print friendly warning for bad command line - Fix avx options for turbo-freq feature - Improve CLX commands - Show error for invalid CPUs in the options - Improve core-power result and error display - Kernel interface error handling - Improve error display for turbo-freq feature - Improve error display for base-freq feature - Improve output of perf-profile commands - Enhance help for core-power assoc - Display error for invalid priority type - Check feature status first - Improve error display for perf-profile feature - Add an API for error/information print - Enhance --info option - Enhance help - Helpful warning for missing kernel interface - Store topology information - Max CPU count calculation when CPU0 is offline - Special handling for CPU 0 online/offline - Use more verbiage for clos information - Enhance core-power info command - Make target CPU optional for core-power info - Warn for invalid package id - Fix last cpu number - Fix mailbox usage for CLOS_PM_QOS_CONFIG - Avoid duplicate names for json parsing - Fix display for turbo-freq auto mode -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl6DMoEACgkQb7wzTHR8 rChW3w//WgzlhbKCl3EO8WjfSGmQHwszLq/Zcj+LLzoPQOl7t1nel1cEIWv7Y4+P /I24l2pqAD2JRgs03hNDg9i/YovPuqhLtS7t7hDNKFfNGdOhIJQkMwhrjXcapbBj UgE5cFbzXjf4400Tv1EkOylIZhOlpTmv5eGk/Dbw+5adTOlTH3MYLntv8ZfBulOh A6Dolto+zPvrbCyrMrgJSpQRIx1Rd8JV3YDXQRTpimmdsTJ7VFC55i1RLJSQ5sGw rF2qAekMExKScezSV8Yy9npDGJ1qUolhj/PciLPr71rmIuWqfdqc8eLeLmsJzIfY WO4TIQ3CTTY1FlZsOZyoeh+Kla//hRyaUoHAU0xEWDD9xKJBdzOIMEs4O/islWYL ILHs7ZdZPrHFI63mxyF0Mw5SgsSG1c6VNa19+H+YxpC4Pp8hbo891RRF7+7hBbdT YRT5yaQMD2M8QowMgxJQ7Xt3Kyz/jRO/8L59v202v3RzJvJ0UJhT+fmHV6OSz5MD SLOmLsXcWvgteNxM8TQ5yxmuDJdQVRuJqQpvPhysqlUEyhoTSLsII5evu/U/jXA4 vIx+QfUejDiy0vMeQu2xUOzxIzSzja6gLO6hKgiAw2cvUMqbOi2CIG7qwbRZkIis uj/GxlwiNfIsEKUE4728ivOHwT9Yke1x+QLl/oVwMh7zSgb+noE= =G0jF -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - Fix for improper handling of fan_boost_mode in sysfs for ASUS laptops. - On newer ASUS laptops the 1st battery is named differently, here is a fix. - Fix Lex 2I385SW to allow both network cards to be used. - The power integrated circuit driver for Surface 3 has been added. - Refactor and clean up of Intel PMC driver and enable it on Intel Jasper Lake. - Clean up of Dell RBU driver. - Big update for Intel Speed Select technology support tool and driver. * tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits) platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler() platform/x86: surface3_power: Fix Kconfig section ordering platform/x86: surface3_power: Add missed headers platform/x86: surface3_power: Reformat GUID assignment platform/x86: surface3_power: Drop useless macro ACPI_PTR() platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3 platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner platform/x86: surface3_power: Use dev_err() instead of pr_err() platform/x86: surface3_power: Drop unused structure definition platform/x86: surface3_power: MSHW0011 rev-eng implementation platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states tools/power/x86/intel-speed-select: Fix a typo in error message tools/power/x86/intel-speed-select: Update version tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json tools/power/x86/intel-speed-select: Add display for enabled cpus count tools/power/x86/intel-speed-select: Print friendly warning for bad command line tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature tools/power/x86/intel-speed-select: Improve CLX commands tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options ...
2020-03-31 16:43:40 -07:00 · 2020-03-31 16:43:40 -07:00 · dba43fc4ba
--- a/82
+++ b/82
@ -303,8 +303,8 @@ F:	drivers/net/ethernet/alteon/acenic*
 ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
 M:	Peter Kaestle <peter@piie.net>
 L:	platform-driver-x86@vger.kernel.org
-W:	http://piie.net/?section=acerhdf
 S:	Maintained
+W:	http://piie.net/?section=acerhdf
 F:	drivers/platform/x86/acerhdf.c

 ACER WMI LAPTOP EXTRAS
@ -2766,8 +2766,8 @@ ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
 M:	Corentin Chary <corentin.chary@gmail.com>
 L:	acpi4asus-user@lists.sourceforge.net
 L:	platform-driver-x86@vger.kernel.org
-W:	http://acpi4asus.sf.net
 S:	Maintained
+W:	http://acpi4asus.sf.net
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c

@ -4745,26 +4745,6 @@ S:	Maintained
 F:	drivers/media/platform/sunxi/sun8i-di/
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml

-DELL SMBIOS DRIVER
-M:	Pali Rohár <pali.rohar@gmail.com>
-M:	Mario Limonciello <mario.limonciello@dell.com>
-L:	platform-driver-x86@vger.kernel.org
-S:	Maintained
-F:	drivers/platform/x86/dell-smbios.*
-
-DELL SMBIOS SMM DRIVER
-M:	Mario Limonciello <mario.limonciello@dell.com>
-L:	platform-driver-x86@vger.kernel.org
-S:	Maintained
-F:	drivers/platform/x86/dell-smbios-smm.c
-
-DELL SMBIOS WMI DRIVER
-M:	Mario Limonciello <mario.limonciello@dell.com>
-L:	platform-driver-x86@vger.kernel.org
-S:	Maintained
-F:	drivers/platform/x86/dell-smbios-wmi.c
-F:	tools/wmi/dell-smbios-example.c
-
 DEFZA FDDI NETWORK DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
@ -4787,17 +4767,37 @@ M:	Pali Rohár <pali.rohar@gmail.com>
 S:	Maintained
 F:	drivers/platform/x86/dell-rbtn.*

+DELL LAPTOP SMM DRIVER
+M:	Pali Rohár <pali.rohar@gmail.com>
+S:	Maintained
+F:	drivers/hwmon/dell-smm-hwmon.c
+F:	include/uapi/linux/i8k.h
+
 DELL REMOTE BIOS UPDATE DRIVER
 M:	Stuart Hayes <stuart.w.hayes@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/dell_rbu.c

-DELL LAPTOP SMM DRIVER
+DELL SMBIOS DRIVER
 M:	Pali Rohár <pali.rohar@gmail.com>
+M:	Mario Limonciello <mario.limonciello@dell.com>
+L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/hwmon/dell-smm-hwmon.c
-F:	include/uapi/linux/i8k.h
+F:	drivers/platform/x86/dell-smbios.*
+
+DELL SMBIOS SMM DRIVER
+M:	Mario Limonciello <mario.limonciello@dell.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/dell-smbios-smm.c
+
+DELL SMBIOS WMI DRIVER
+M:	Mario Limonciello <mario.limonciello@dell.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/dell-smbios-wmi.c
+F:	tools/wmi/dell-smbios-example.c

 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
 M:	Stuart Hayes <stuart.w.hayes@gmail.com>
@ -4806,17 +4806,17 @@ S:	Maintained
 F:	Documentation/driver-api/dcdbas.rst
 F:	drivers/platform/x86/dcdbas.*

+DELL WMI DESCRIPTOR DRIVER
+M:	Mario Limonciello <mario.limonciello@dell.com>
+S:	Maintained
+F:	drivers/platform/x86/dell-wmi-descriptor.c
+
 DELL WMI NOTIFICATIONS DRIVER
 M:	Matthew Garrett <mjg59@srcf.ucam.org>
 M:	Pali Rohár <pali.rohar@gmail.com>
 S:	Maintained
 F:	drivers/platform/x86/dell-wmi.c

-DELL WMI DESCRIPTOR DRIVER
-M:	Mario Limonciello <mario.limonciello@dell.com>
-S:	Maintained
-F:	drivers/platform/x86/dell-wmi-descriptor.c
-
 DELTA ST MEDIA DRIVER
 M:	Hugues Fruchet <hugues.fruchet@st.com>
 L:	linux-media@vger.kernel.org
@ -7375,8 +7375,8 @@ F:	drivers/media/usb/hackrf/
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
 M:	Frank Seidel <frank@f-seidel.de>
 L:	platform-driver-x86@vger.kernel.org
-W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:	Maintained
+W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 F:	drivers/platform/x86/hdaps.c

 HARDWARE MONITORING
@ -8119,15 +8119,15 @@ F:	drivers/ide/ide-cd*
 IDEAPAD LAPTOP EXTRAS DRIVER
 M:	Ike Panhc <ike.pan@canonical.com>
 L:	platform-driver-x86@vger.kernel.org
-W:	http://launchpad.net/ideapad-laptop
 S:	Maintained
+W:	http://launchpad.net/ideapad-laptop
 F:	drivers/platform/x86/ideapad-laptop.c

 IDEAPAD LAPTOP SLIDEBAR DRIVER
 M:	Andrey Moiseev <o2g.org.ru@gmail.com>
 L:	linux-input@vger.kernel.org
-W:	https://github.com/o2genum/ideapad-slidebar
 S:	Maintained
+W:	https://github.com/o2genum/ideapad-slidebar
 F:	drivers/input/misc/ideapad_slidebar.c

 IDT VersaClock 5 CLOCK DRIVER
@ -8593,8 +8593,8 @@ F:	samples/mei/*
 INTEL MENLOW THERMAL DRIVER
 M:	Sujith Thomas <sujith.thomas@intel.com>
 L:	platform-driver-x86@vger.kernel.org
-W:	https://01.org/linux-acpi
 S:	Supported
+W:	https://01.org/linux-acpi
 F:	drivers/platform/x86/intel_menlow.c

 INTEL MIC DRIVERS (mic)
@ -8624,10 +8624,10 @@ INTEL PMC/P-Unit IPC DRIVER
 M:	Zha Qipeng<qipeng.zha@intel.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/intel_pmc_ipc.c
-F:	drivers/platform/x86/intel_punit_ipc.c
 F:	arch/x86/include/asm/intel_pmc_ipc.h
 F:	arch/x86/include/asm/intel_punit_ipc.h
+F:	drivers/platform/x86/intel_pmc_ipc.c
+F:	drivers/platform/x86/intel_punit_ipc.c

 INTEL PMIC GPIO DRIVERS
 M:	Andy Shevchenko <andy@kernel.org>
@ -8672,8 +8672,8 @@ M:	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/intel_speed_select_if/
-F:	tools/power/x86/intel-speed-select/
 F:	include/uapi/linux/isst_if.h
+F:	tools/power/x86/intel-speed-select/

 INTEL STRATIX10 FIRMWARE DRIVERS
 M:	Richard Gong <richard.gong@linux.intel.com>
@ -15626,8 +15626,8 @@ F:	include/linux/memstick.h
 SONY VAIO CONTROL DEVICE DRIVER
 M:	Mattia Dongili <malattia@linux.it>
 L:	platform-driver-x86@vger.kernel.org
-W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 S:	Maintained
+W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 F:	Documentation/admin-guide/laptops/sony-laptop.rst
 F:	drivers/char/sonypi.c
 F:	drivers/platform/x86/sony-laptop.c
@ -16602,10 +16602,10 @@ THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
 L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
 W:	http://ibm-acpi.sourceforge.net
 W:	http://thinkwiki.org/wiki/Ibm-acpi
 T:	git git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
-S:	Maintained
 F:	drivers/platform/x86/thinkpad_acpi.c

 THUNDERBOLT DRIVER
@ -18250,10 +18250,10 @@ X86 PLATFORM DRIVERS
 M:	Darren Hart <dvhart@infradead.org>
 M:	Andy Shevchenko <andy@infradead.org>
 L:	platform-driver-x86@vger.kernel.org
-T:	git git://git.infradead.org/linux-platform-drivers-x86.git
 S:	Odd Fixes
-F:	drivers/platform/x86/
+T:	git git://git.infradead.org/linux-platform-drivers-x86.git
 F:	drivers/platform/olpc/
+F:	drivers/platform/x86/

 X86 PLATFORM DRIVERS - ARCH
 R:	Darren Hart <dvhart@infradead.org>
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@ -3,106 +3,146 @@
 # Makefile for linux/drivers/platform/x86
 # x86 Platform-Specific Drivers
 #
+
+# Windows Management Interface
+obj-$(CONFIG_ACPI_WMI)		+= wmi.o
+obj-$(CONFIG_WMI_BMOF)		+= wmi-bmof.o
+
+# WMI drivers
+obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
+obj-$(CONFIG_HUAWEI_WMI)		+= huawei-wmi.o
+obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
+obj-$(CONFIG_MXM_WMI)			+= mxm-wmi.o
+obj-$(CONFIG_PEAQ_WMI)			+= peaq-wmi.o
+obj-$(CONFIG_XIAOMI_WMI)		+= xiaomi-wmi.o
+
+# Acer
+obj-$(CONFIG_ACERHDF)		+= acerhdf.o
+obj-$(CONFIG_ACER_WIRELESS)	+= acer-wireless.o
+obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
+
+# Apple
+obj-$(CONFIG_APPLE_GMUX)	+= apple-gmux.o
+
+# ASUS
 obj-$(CONFIG_ASUS_LAPTOP)	+= asus-laptop.o
+obj-$(CONFIG_ASUS_WIRELESS)	+= asus-wireless.o
 obj-$(CONFIG_ASUS_WMI)		+= asus-wmi.o
 obj-$(CONFIG_ASUS_NB_WMI)	+= asus-nb-wmi.o
-obj-$(CONFIG_ASUS_WIRELESS)	+= asus-wireless.o
 obj-$(CONFIG_EEEPC_LAPTOP)	+= eeepc-laptop.o
 obj-$(CONFIG_EEEPC_WMI)		+= eeepc-wmi.o
-obj-$(CONFIG_LG_LAPTOP)		+= lg-laptop.o
-obj-$(CONFIG_MSI_LAPTOP)	+= msi-laptop.o
-obj-$(CONFIG_ACPI_CMPC)		+= classmate-laptop.o
-obj-$(CONFIG_COMPAL_LAPTOP)	+= compal-laptop.o
-obj-$(CONFIG_DCDBAS)		+= dcdbas.o
-obj-$(CONFIG_DELL_SMBIOS)	+= dell-smbios.o
-dell-smbios-objs		:= dell-smbios-base.o
+
+# Dell
+obj-$(CONFIG_DCDBAS)			+= dcdbas.o
+obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
+dell-smbios-objs			:= dell-smbios-base.o
 dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
 dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_LAPTOP)	+= dell-laptop.o
-obj-$(CONFIG_DELL_WMI)		+= dell-wmi.o
+obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
+obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
+obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
+obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
 obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_AIO)	+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_LED)	+= dell-wmi-led.o
-obj-$(CONFIG_DELL_SMO8800)	+= dell-smo8800.o
-obj-$(CONFIG_DELL_RBTN)		+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
-obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
-obj-$(CONFIG_ACER_WIRELESS)	+= acer-wireless.o
-obj-$(CONFIG_ACERHDF)		+= acerhdf.o
+obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
+obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
+
+# Fujitsu
+obj-$(CONFIG_AMILO_RFKILL)	+= amilo-rfkill.o
+obj-$(CONFIG_FUJITSU_LAPTOP)	+= fujitsu-laptop.o
+obj-$(CONFIG_FUJITSU_TABLET)	+= fujitsu-tablet.o
+
+# GPD
+obj-$(CONFIG_GPD_POCKET_FAN)	+= gpd-pocket-fan.o
+
+# Hewlett Packard
 obj-$(CONFIG_HP_ACCEL)		+= hp_accel.o
 obj-$(CONFIG_HP_WIRELESS)	+= hp-wireless.o
 obj-$(CONFIG_HP_WMI)		+= hp-wmi.o
-obj-$(CONFIG_HUAWEI_WMI)		+= huawei-wmi.o
-obj-$(CONFIG_AMILO_RFKILL)	+= amilo-rfkill.o
-obj-$(CONFIG_GPD_POCKET_FAN)	+= gpd-pocket-fan.o
 obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
-obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
+
+# IBM Thinkpad and Lenovo
+obj-$(CONFIG_IBM_RTL)		+= ibm_rtl.o
 obj-$(CONFIG_IDEAPAD_LAPTOP)	+= ideapad-laptop.o
-obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
 obj-$(CONFIG_SENSORS_HDAPS)	+= hdaps.o
-obj-$(CONFIG_FUJITSU_LAPTOP)	+= fujitsu-laptop.o
-obj-$(CONFIG_FUJITSU_TABLET)	+= fujitsu-tablet.o
-obj-$(CONFIG_PANASONIC_LAPTOP)	+= panasonic-laptop.o
-obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
-obj-$(CONFIG_ACPI_WMI)		+= wmi.o
+obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
+
+# Intel
+obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
+obj-$(CONFIG_INTEL_CHT_INT33FE)		+= intel_cht_int33fe.o
+intel_cht_int33fe-objs			:= intel_cht_int33fe_common.o \
+					   intel_cht_int33fe_typec.o \
+					   intel_cht_int33fe_microb.o
+obj-$(CONFIG_INTEL_HID_EVENT)		+= intel-hid.o
+obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
+obj-$(CONFIG_INTEL_MENLOW)		+= intel_menlow.o
+obj-$(CONFIG_INTEL_OAKTRAIL)		+= intel_oaktrail.o
+obj-$(CONFIG_INTEL_VBTN)		+= intel-vbtn.o
+
+# Microsoft
+obj-$(CONFIG_SURFACE3_WMI)		+= surface3-wmi.o
+obj-$(CONFIG_SURFACE_3_BUTTON)		+= surface3_button.o
+obj-$(CONFIG_SURFACE_3_POWER_OPREGION)	+= surface3_power.o
+obj-$(CONFIG_SURFACE_PRO3_BUTTON)	+= surfacepro3_button.o
+
+# MSI
+obj-$(CONFIG_MSI_LAPTOP)	+= msi-laptop.o
 obj-$(CONFIG_MSI_WMI)		+= msi-wmi.o
-obj-$(CONFIG_PEAQ_WMI)		+= peaq-wmi.o
-obj-$(CONFIG_SURFACE3_WMI)	+= surface3-wmi.o
-obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
-obj-$(CONFIG_WMI_BMOF)		+= wmi-bmof.o
-obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
-obj-$(CONFIG_XIAOMI_WMI)	+= xiaomi-wmi.o
+
+# OLPC
+obj-$(CONFIG_XO15_EBOOK)	+= xo15-ebook.o
+obj-$(CONFIG_XO1_RFKILL)	+= xo1-rfkill.o
+
+# PC Engines
+obj-$(CONFIG_PCENGINES_APU2)	+= pcengines-apuv2.o
+
+# Samsung
+obj-$(CONFIG_SAMSUNG_LAPTOP)	+= samsung-laptop.o
+obj-$(CONFIG_SAMSUNG_Q10)	+= samsung-q10.o
+
+# Toshiba
+obj-$(CONFIG_TOSHIBA_BT_RFKILL)	+= toshiba_bluetooth.o
+obj-$(CONFIG_TOSHIBA_HAPS)	+= toshiba_haps.o
+obj-$(CONFIG_TOSHIBA_WMI)	+= toshiba-wmi.o

 # toshiba_acpi must link after wmi to ensure that wmi devices are found
 # before toshiba_acpi initializes
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o

-obj-$(CONFIG_TOSHIBA_BT_RFKILL)	+= toshiba_bluetooth.o
-obj-$(CONFIG_TOSHIBA_HAPS)	+= toshiba_haps.o
-obj-$(CONFIG_TOSHIBA_WMI)	+= toshiba-wmi.o
-obj-$(CONFIG_INTEL_CHT_INT33FE)	+= intel_cht_int33fe.o
-intel_cht_int33fe-objs		:= intel_cht_int33fe_common.o \
-				   intel_cht_int33fe_typec.o \
-				   intel_cht_int33fe_microb.o
-
-obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o
-obj-$(CONFIG_INTEL_HID_EVENT)	+= intel-hid.o
-obj-$(CONFIG_INTEL_VBTN)	+= intel-vbtn.o
-obj-$(CONFIG_INTEL_SCU_IPC)	+= intel_scu_ipc.o
-obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
-obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
-obj-$(CONFIG_INTEL_IPS)		+= intel_ips.o
-obj-$(CONFIG_XO1_RFKILL)	+= xo1-rfkill.o
-obj-$(CONFIG_XO15_EBOOK)	+= xo15-ebook.o
-obj-$(CONFIG_IBM_RTL)		+= ibm_rtl.o
-obj-$(CONFIG_SAMSUNG_LAPTOP)	+= samsung-laptop.o
-obj-$(CONFIG_MXM_WMI)		+= mxm-wmi.o
-obj-$(CONFIG_INTEL_MID_POWER_BUTTON)	+= intel_mid_powerbtn.o
-obj-$(CONFIG_INTEL_OAKTRAIL)	+= intel_oaktrail.o
-obj-$(CONFIG_SAMSUNG_Q10)	+= samsung-q10.o
-obj-$(CONFIG_APPLE_GMUX)	+= apple-gmux.o
-obj-$(CONFIG_INTEL_RST)		+= intel-rst.o
-obj-$(CONFIG_INTEL_SMARTCONNECT)	+= intel-smartconnect.o
-
-obj-$(CONFIG_ALIENWARE_WMI)	+= alienware-wmi.o
-obj-$(CONFIG_INTEL_PMC_IPC)	+= intel_pmc_ipc.o
-obj-$(CONFIG_TOUCHSCREEN_DMI)	+= touchscreen_dmi.o
-obj-$(CONFIG_SURFACE_PRO3_BUTTON)	+= surfacepro3_button.o
-obj-$(CONFIG_SURFACE_3_BUTTON)	+= surface3_button.o
-obj-$(CONFIG_INTEL_PUNIT_IPC)  += intel_punit_ipc.o
-obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)	+= intel_bxtwc_tmu.o
-obj-$(CONFIG_INTEL_TELEMETRY)	+= intel_telemetry_core.o \
-				   intel_telemetry_pltdrv.o \
-				   intel_telemetry_debugfs.o
-obj-$(CONFIG_INTEL_PMC_CORE)    += intel_pmc_core.o intel_pmc_core_pltdrv.o
-obj-$(CONFIG_PMC_ATOM)		+= pmc_atom.o
-obj-$(CONFIG_MLX_PLATFORM)	+= mlx-platform.o
-obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
-obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
-obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
-obj-$(CONFIG_I2C_MULTI_INSTANTIATE)	+= i2c-multi-instantiate.o
-obj-$(CONFIG_INTEL_ATOMISP2_PM)	+= intel_atomisp2_pm.o
-obj-$(CONFIG_PCENGINES_APU2)	+= pcengines-apuv2.o
-obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += intel_speed_select_if/
+# Laptop drivers
+obj-$(CONFIG_ACPI_CMPC)		+= classmate-laptop.o
+obj-$(CONFIG_COMPAL_LAPTOP)	+= compal-laptop.o
+obj-$(CONFIG_LG_LAPTOP)		+= lg-laptop.o
+obj-$(CONFIG_PANASONIC_LAPTOP)	+= panasonic-laptop.o
+obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
 obj-$(CONFIG_SYSTEM76_ACPI)	+= system76_acpi.o
-obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)	+= intel-uncore-frequency.o
+obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
+
+# Platform drivers
+obj-$(CONFIG_I2C_MULTI_INSTANTIATE)	+= i2c-multi-instantiate.o
+obj-$(CONFIG_MLX_PLATFORM)		+= mlx-platform.o
+obj-$(CONFIG_TOUCHSCREEN_DMI)		+= touchscreen_dmi.o
+
+# Intel uncore drivers
+obj-$(CONFIG_INTEL_IPS)				+= intel_ips.o
+obj-$(CONFIG_INTEL_RST)				+= intel-rst.o
+obj-$(CONFIG_INTEL_SMARTCONNECT)		+= intel-smartconnect.o
+obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE)	+= intel_speed_select_if/
+obj-$(CONFIG_INTEL_TURBO_MAX_3)			+= intel_turbo_max_3.o
+obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
+
+# Intel PMIC / PMC / P-Unit devices
+obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)	+= intel_bxtwc_tmu.o
+obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
+obj-$(CONFIG_INTEL_MFLD_THERMAL)	+= intel_mid_thermal.o
+obj-$(CONFIG_INTEL_MID_POWER_BUTTON)	+= intel_mid_powerbtn.o
+obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
+obj-$(CONFIG_INTEL_PMC_CORE)		+= intel_pmc_core.o intel_pmc_core_pltdrv.o
+obj-$(CONFIG_INTEL_PMC_IPC)		+= intel_pmc_ipc.o
+obj-$(CONFIG_INTEL_PUNIT_IPC)		+= intel_punit_ipc.o
+obj-$(CONFIG_INTEL_SCU_IPC)		+= intel_scu_ipc.o
+obj-$(CONFIG_INTEL_SCU_IPC_UTIL)	+= intel_scu_ipcutil.o
+obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_core.o \
+					   intel_telemetry_pltdrv.o \
+					   intel_telemetry_debugfs.o
+obj-$(CONFIG_PMC_ATOM)			+= pmc_atom.o
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@ -426,8 +426,11 @@ static int asus_wmi_battery_add(struct power_supply *battery)
 {
 	/* The WMI method does not provide a way to specific a battery, so we
 	 * just assume it is the first battery.
+	 * Note: On some newer ASUS laptops (Zenbook UM431DA), the primary/first
+	 * battery is named BATT.
 	 */
-	if (strcmp(battery->desc->name, "BAT0") != 0)
+	if (strcmp(battery->desc->name, "BAT0") != 0 &&
+	    strcmp(battery->desc->name, "BATT") != 0)
 		return -ENODEV;

 	if (device_create_file(&battery->dev,
@ -1719,7 +1722,7 @@ static ssize_t fan_boost_mode_store(struct device *dev,
 	asus->fan_boost_mode = new_mode;
 	fan_boost_mode_write(asus);

-	return result;
+	return count;
 }

 // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
--- a/drivers/platform/x86/dell_rbu.c
+++ b/drivers/platform/x86/dell_rbu.c
@ -26,6 +26,9 @@
 *
 * See Documentation/admin-guide/dell_rbu.rst for more info.
 */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@ -61,13 +64,11 @@ static struct _rbu_data {

 static char image_type[MAX_IMAGE_LENGTH + 1] = "mono";
 module_param_string(image_type, image_type, sizeof (image_type), 0);
-MODULE_PARM_DESC(image_type,
-	"BIOS image type. choose- mono or packet or init");
+MODULE_PARM_DESC(image_type, "BIOS image type. choose- mono or packet or init");

 static unsigned long allocation_floor = 0x100000;
 module_param(allocation_floor, ulong, 0644);
-MODULE_PARM_DESC(allocation_floor,
-    "Minimum address for allocations when using Packet mode");
+MODULE_PARM_DESC(allocation_floor, "Minimum address for allocations when using Packet mode");

 struct packet_data {
 	struct list_head list;
@ -100,10 +101,10 @@ static int create_packet(void *data, size_t length)
 	void *packet_data_temp_buf = NULL;
 	unsigned int idx = 0;

-	pr_debug("create_packet: entry \n");
+	pr_debug("entry\n");

 	if (!rbu_data.packetsize) {
-		pr_debug("create_packet: packetsize not specified\n");
+		pr_debug("packetsize not specified\n");
 		retval = -EINVAL;
 		goto out_noalloc;
 	}
@ -113,9 +114,7 @@ static int create_packet(void *data, size_t length)
 	newpacket = kzalloc(sizeof (struct packet_data), GFP_KERNEL);

 	if (!newpacket) {
-		printk(KERN_WARNING
-			"dell_rbu:%s: failed to allocate new "
-			"packet\n", __func__);
+		pr_warn("failed to allocate new packet\n");
 		retval = -ENOMEM;
 		spin_lock(&rbu_data.lock);
 		goto out_noalloc;
@ -134,17 +133,12 @@ static int create_packet(void *data, size_t length)
 	 *       due to BIOS errata. This shouldn't be used for higher floors
 	 *       or you will run out of mem trying to allocate the array.
 	 */
-	packet_array_size = max(
-	       		(unsigned int)(allocation_floor / rbu_data.packetsize),
-			(unsigned int)1);
+	packet_array_size = max_t(unsigned int, allocation_floor / rbu_data.packetsize, 1);
 	invalid_addr_packet_array = kcalloc(packet_array_size, sizeof(void *),
 						GFP_KERNEL);

 	if (!invalid_addr_packet_array) {
-		printk(KERN_WARNING
-			"dell_rbu:%s: failed to allocate "
-			"invalid_addr_packet_array \n",
-			__func__);
+		pr_warn("failed to allocate invalid_addr_packet_array\n");
 		retval = -ENOMEM;
 		spin_lock(&rbu_data.lock);
 		goto out_alloc_packet;
@ -154,9 +148,7 @@ static int create_packet(void *data, size_t length)
 		packet_data_temp_buf = (unsigned char *)
 			__get_free_pages(GFP_KERNEL, ordernum);
 		if (!packet_data_temp_buf) {
-			printk(KERN_WARNING
-				"dell_rbu:%s: failed to allocate new "
-				"packet\n", __func__);
+			pr_warn("failed to allocate new packet\n");
 			retval = -ENOMEM;
 			spin_lock(&rbu_data.lock);
 			goto out_alloc_packet_array;
@ -164,7 +156,7 @@ static int create_packet(void *data, size_t length)

 		if ((unsigned long)virt_to_phys(packet_data_temp_buf)
 				< allocation_floor) {
-			pr_debug("packet 0x%lx below floor at 0x%lx.\n",
+			pr_debug("packet 0x%lx below floor at 0x%lx\n",
 					(unsigned long)virt_to_phys(
 						packet_data_temp_buf),
 					allocation_floor);
@ -181,7 +173,7 @@ static int create_packet(void *data, size_t length)

 	newpacket->data = packet_data_temp_buf;

-	pr_debug("create_packet: newpacket at physical addr %lx\n",
+	pr_debug("newpacket at physical addr %lx\n",
 		(unsigned long)virt_to_phys(newpacket->data));

 	/* packets may not have fixed size */
@ -195,16 +187,14 @@ static int create_packet(void *data, size_t length)

 	memcpy(newpacket->data, data, length);

-	pr_debug("create_packet: exit \n");
+	pr_debug("exit\n");

 out_alloc_packet_array:
 	/* always free packet array */
-	for (;idx>0;idx--) {
-		pr_debug("freeing unused packet below floor 0x%lx.\n",
-			(unsigned long)virt_to_phys(
-				invalid_addr_packet_array[idx-1]));
-		free_pages((unsigned long)invalid_addr_packet_array[idx-1],
-			ordernum);
+	while (idx--) {
+		pr_debug("freeing unused packet below floor 0x%lx\n",
+			(unsigned long)virt_to_phys(invalid_addr_packet_array[idx]));
+		free_pages((unsigned long)invalid_addr_packet_array[idx], ordernum);
 	}
 	kfree(invalid_addr_packet_array);

@ -224,10 +214,9 @@ static int packetize_data(const u8 *data, size_t length)
 	int packet_length;
 	u8 *temp;
 	u8 *end = (u8 *) data + length;
-	pr_debug("packetize_data: data length %zd\n", length);
+	pr_debug("data length %zd\n", length);
 	if (!rbu_data.packetsize) {
-		printk(KERN_WARNING
-			"dell_rbu: packetsize not specified\n");
+		pr_warn("packetsize not specified\n");
 		return -EIO;
 	}

@ -255,15 +244,13 @@ static int packetize_data(const u8 *data, size_t length)
 	return rc;
 }

-static int do_packet_read(char *data, struct list_head *ptemp_list,
+static int do_packet_read(char *data, struct packet_data *newpacket,
 	int length, int bytes_read, int *list_read_count)
 {
 	void *ptemp_buf;
-	struct packet_data *newpacket = NULL;
 	int bytes_copied = 0;
 	int j = 0;

-	newpacket = list_entry(ptemp_list, struct packet_data, list);
 	*list_read_count += newpacket->length;

 	if (*list_read_count > bytes_read) {
@ -291,7 +278,7 @@ static int do_packet_read(char *data, struct list_head *ptemp_list,

 static int packet_read_list(char *data, size_t * pread_length)
 {
-	struct list_head *ptemp_list;
+	struct packet_data *newpacket;
 	int temp_count = 0;
 	int bytes_copied = 0;
 	int bytes_read = 0;
@ -305,9 +292,8 @@ static int packet_read_list(char *data, size_t * pread_length)
 	remaining_bytes = *pread_length;
 	bytes_read = rbu_data.packet_read_count;

-	ptemp_list = (&packet_data_head.list)->next;
-	while (!list_empty(ptemp_list)) {
-		bytes_copied = do_packet_read(pdest, ptemp_list,
+	list_for_each_entry(newpacket, (&packet_data_head.list)->next, list) {
+		bytes_copied = do_packet_read(pdest, newpacket,
 			remaining_bytes, bytes_read, &temp_count);
 		remaining_bytes -= bytes_copied;
 		bytes_read += bytes_copied;
@ -318,8 +304,6 @@ static int packet_read_list(char *data, size_t * pread_length)
 		 */
 		if (remaining_bytes == 0)
 			break;
-
-		ptemp_list = ptemp_list->next;
 	}
 	/*finally set the bytes read */
 	*pread_length = bytes_read - rbu_data.packet_read_count;
@ -329,17 +313,11 @@ static int packet_read_list(char *data, size_t * pread_length)

 static void packet_empty_list(void)
 {
-	struct list_head *ptemp_list;
-	struct list_head *pnext_list;
-	struct packet_data *newpacket;
+	struct packet_data *newpacket, *tmp;
+
+	list_for_each_entry_safe(newpacket, tmp, (&packet_data_head.list)->next, list) {
+		list_del(&newpacket->list);

-	ptemp_list = (&packet_data_head.list)->next;
-	while (!list_empty(ptemp_list)) {
-		newpacket =
-			list_entry(ptemp_list, struct packet_data, list);
-		pnext_list = ptemp_list->next;
-		list_del(ptemp_list);
-		ptemp_list = pnext_list;
 		/*
 		 * zero out the RBU packet memory before freeing
 		 * to make sure there are no stale RBU packets left in memory
@ -407,8 +385,7 @@ static int img_update_realloc(unsigned long size)
 		 * check for corruption
 		 */
 		if ((size != 0) && (rbu_data.image_update_buffer == NULL)) {
-			printk(KERN_ERR "dell_rbu:%s: corruption "
-				"check failed\n", __func__);
+			pr_err("corruption check failed\n");
 			return -EINVAL;
 		}
 		/*
@ -430,8 +407,7 @@ static int img_update_realloc(unsigned long size)
 		(unsigned char *)__get_free_pages(GFP_DMA32, ordernum);
 	spin_lock(&rbu_data.lock);
 	if (!image_update_buffer) {
-		pr_debug("Not enough memory for image update:"
-			"size = %ld\n", size);
+		pr_debug("Not enough memory for image update: size = %ld\n", size);
 		return -ENOMEM;
 	}

@ -455,15 +431,14 @@ static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count)

 	/* check to see if we have something to return */
 	if (rbu_data.num_packets == 0) {
-		pr_debug("read_packet_data: no packets written\n");
+		pr_debug("no packets written\n");
 		retval = -ENOMEM;
 		goto read_rbu_data_exit;
 	}

 	if (pos > rbu_data.imagesize) {
 		retval = 0;
-		printk(KERN_WARNING "dell_rbu:read_packet_data: "
-			"data underrun\n");
+		pr_warn("data underrun\n");
 		goto read_rbu_data_exit;
 	}

@ -489,8 +464,7 @@ static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
 	/* check to see if we have something to return */
 	if ((rbu_data.image_update_buffer == NULL) ||
 		(rbu_data.bios_image_size == 0)) {
-		pr_debug("read_rbu_data_mono: image_update_buffer %p ,"
-			"bios_image_size %lu\n",
+		pr_debug("image_update_buffer %p, bios_image_size %lu\n",
 			rbu_data.image_update_buffer,
 			rbu_data.bios_image_size);
 		return -ENOMEM;
@ -500,9 +474,9 @@ static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
 			rbu_data.image_update_buffer, rbu_data.bios_image_size);
 }

-static ssize_t read_rbu_data(struct file *filp, struct kobject *kobj,
-			     struct bin_attribute *bin_attr,
-			     char *buffer, loff_t pos, size_t count)
+static ssize_t data_read(struct file *filp, struct kobject *kobj,
+			 struct bin_attribute *bin_attr,
+			 char *buffer, loff_t pos, size_t count)
 {
 	ssize_t ret_count = 0;

@ -513,11 +487,12 @@ static ssize_t read_rbu_data(struct file *filp, struct kobject *kobj,
 	else if (!strcmp(image_type, "packet"))
 		ret_count = read_packet_data(buffer, pos, count);
 	else
-		pr_debug("read_rbu_data: invalid image type specified\n");
+		pr_debug("invalid image type specified\n");

 	spin_unlock(&rbu_data.lock);
 	return ret_count;
 }
+static BIN_ATTR_RO(data, 0);

 static void callbackfn_rbu(const struct firmware *fw, void *context)
 {
@ -548,15 +523,15 @@ static void callbackfn_rbu(const struct firmware *fw, void *context)
 			 */
 			packet_empty_list();
 	} else
-		pr_debug("invalid image type specified.\n");
+		pr_debug("invalid image type specified\n");
 	spin_unlock(&rbu_data.lock);
 out:
 	release_firmware(fw);
 }

-static ssize_t read_rbu_image_type(struct file *filp, struct kobject *kobj,
-				   struct bin_attribute *bin_attr,
-				   char *buffer, loff_t pos, size_t count)
+static ssize_t image_type_read(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buffer, loff_t pos, size_t count)
 {
 	int size = 0;
 	if (!pos)
@ -564,9 +539,9 @@ static ssize_t read_rbu_image_type(struct file *filp, struct kobject *kobj,
 	return size;
 }

-static ssize_t write_rbu_image_type(struct file *filp, struct kobject *kobj,
-				    struct bin_attribute *bin_attr,
-				    char *buffer, loff_t pos, size_t count)
+static ssize_t image_type_write(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buffer, loff_t pos, size_t count)
 {
 	int rc = count;
 	int req_firm_rc = 0;
@ -602,9 +577,7 @@ static ssize_t write_rbu_image_type(struct file *filp, struct kobject *kobj,
 				&rbu_device->dev, GFP_KERNEL, &context,
 				callbackfn_rbu);
 			if (req_firm_rc) {
-				printk(KERN_ERR
-					"dell_rbu:%s request_firmware_nowait"
-					" failed %d\n", __func__, rc);
+				pr_err("request_firmware_nowait failed %d\n", rc);
 				rc = -EIO;
 			} else
 				rbu_data.entry_created = 1;
@ -612,7 +585,7 @@ static ssize_t write_rbu_image_type(struct file *filp, struct kobject *kobj,
 			spin_lock(&rbu_data.lock);
 		}
 	} else {
-		printk(KERN_WARNING "dell_rbu: image_type is invalid\n");
+		pr_warn("image_type is invalid\n");
 		spin_unlock(&rbu_data.lock);
 		return -EINVAL;
 	}
@ -624,10 +597,11 @@ static ssize_t write_rbu_image_type(struct file *filp, struct kobject *kobj,

 	return rc;
 }
+static BIN_ATTR_RW(image_type, 0);

-static ssize_t read_rbu_packet_size(struct file *filp, struct kobject *kobj,
-				    struct bin_attribute *bin_attr,
-				    char *buffer, loff_t pos, size_t count)
+static ssize_t packet_size_read(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buffer, loff_t pos, size_t count)
 {
 	int size = 0;
 	if (!pos) {
@ -638,9 +612,9 @@ static ssize_t read_rbu_packet_size(struct file *filp, struct kobject *kobj,
 	return size;
 }

-static ssize_t write_rbu_packet_size(struct file *filp, struct kobject *kobj,
-				     struct bin_attribute *bin_attr,
-				     char *buffer, loff_t pos, size_t count)
+static ssize_t packet_size_write(struct file *filp, struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buffer, loff_t pos, size_t count)
 {
 	unsigned long temp;
 	spin_lock(&rbu_data.lock);
@ -652,22 +626,17 @@ static ssize_t write_rbu_packet_size(struct file *filp, struct kobject *kobj,
 	spin_unlock(&rbu_data.lock);
 	return count;
 }
+static BIN_ATTR_RW(packet_size, 0);

-static struct bin_attribute rbu_data_attr = {
-	.attr = {.name = "data", .mode = 0444},
-	.read = read_rbu_data,
+static struct bin_attribute *rbu_bin_attrs[] = {
+	&bin_attr_data,
+	&bin_attr_image_type,
+	&bin_attr_packet_size,
+	NULL
 };

-static struct bin_attribute rbu_image_type_attr = {
-	.attr = {.name = "image_type", .mode = 0644},
-	.read = read_rbu_image_type,
-	.write = write_rbu_image_type,
-};
-
-static struct bin_attribute rbu_packet_size_attr = {
-	.attr = {.name = "packet_size", .mode = 0644},
-	.read = read_rbu_packet_size,
-	.write = write_rbu_packet_size,
+static const struct attribute_group rbu_group = {
+	.bin_attrs = rbu_bin_attrs,
 };

 static int __init dcdrbu_init(void)
@ -678,30 +647,17 @@ static int __init dcdrbu_init(void)
 	init_packet_head();
 	rbu_device = platform_device_register_simple("dell_rbu", -1, NULL, 0);
 	if (IS_ERR(rbu_device)) {
-		printk(KERN_ERR
-			"dell_rbu:%s:platform_device_register_simple "
-			"failed\n", __func__);
+		pr_err("platform_device_register_simple failed\n");
 		return PTR_ERR(rbu_device);
 	}

-	rc = sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
+	rc = sysfs_create_group(&rbu_device->dev.kobj, &rbu_group);
 	if (rc)
 		goto out_devreg;
-	rc = sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr);
-	if (rc)
-		goto out_data;
-	rc = sysfs_create_bin_file(&rbu_device->dev.kobj,
-		&rbu_packet_size_attr);
-	if (rc)
-		goto out_imtype;

 	rbu_data.entry_created = 0;
 	return 0;

-out_imtype:
-	sysfs_remove_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr);
-out_data:
-	sysfs_remove_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
 out_devreg:
 	platform_device_unregister(rbu_device);
 	return rc;
@ -713,6 +669,7 @@ static __exit void dcdrbu_exit(void)
 	packet_empty_list();
 	img_update_free();
 	spin_unlock(&rbu_data.lock);
+	sysfs_remove_group(&rbu_device->dev.kobj, &rbu_group);
 	platform_device_unregister(rbu_device);
 }

--- a/drivers/platform/x86/gpd-pocket-fan.c
+++ b/drivers/platform/x86/gpd-pocket-fan.c
@ -128,7 +128,7 @@ static int gpd_pocket_fan_probe(struct platform_device *pdev)

 	for (i = 0; i < ARRAY_SIZE(temp_limits); i++) {
 		if (temp_limits[i] < 20000 || temp_limits[i] > 90000) {
-			dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 40000 and 70000)\n",
+			dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 20000 and 90000)\n",
 				temp_limits[i]);
 			temp_limits[0] = TEMP_LIMIT0_DEFAULT;
 			temp_limits[1] = TEMP_LIMIT1_DEFAULT;
--- a/drivers/platform/x86/i2c-multi-instantiate.c
+++ b/drivers/platform/x86/i2c-multi-instantiate.c
@ -28,7 +28,7 @@ struct i2c_inst_data {

 struct i2c_multi_inst_data {
 	int num_clients;
-	struct i2c_client *clients[0];
+	struct i2c_client *clients[];
 };

 static int i2c_multi_inst_count(struct acpi_resource *ares, void *data)
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@ -23,6 +23,7 @@ static const struct acpi_device_id intel_hid_ids[] = {
 	{"INT33D5", 0},
 	{"", 0},
 };
+MODULE_DEVICE_TABLE(acpi, intel_hid_ids);

 /* In theory, these are HID usages. */
 static const struct key_entry intel_hid_keymap[] = {
@ -541,7 +542,6 @@ static struct platform_driver intel_hid_pl_driver = {
 	.probe = intel_hid_probe,
 	.remove = intel_hid_remove,
 };
-MODULE_DEVICE_TABLE(acpi, intel_hid_ids);

 /*
 * Unfortunately, some laptops provide a _HID="INT33D5" device with
--- a/drivers/platform/x86/intel-uncore-frequency.c
+++ b/drivers/platform/x86/intel-uncore-frequency.c
@ -38,6 +38,7 @@
 */
 struct uncore_data {
 	struct kobject kobj;
+	struct completion kobj_unregister;
 	u64 stored_uncore_data;
 	u32 initial_min_freq_khz;
 	u32 initial_max_freq_khz;
@ -52,7 +53,7 @@ static int uncore_max_entries __read_mostly;
 /* Storage for uncore data for all instances */
 static struct uncore_data *uncore_instances;
 /* Root of the all uncore sysfs kobjs */
-struct kobject uncore_root_kobj;
+struct kobject *uncore_root_kobj;
 /* Stores the CPU mask of the target CPUs to use during uncore read/write */
 static cpumask_t uncore_cpu_mask;
 /* CPU online callback register instance */
@ -97,6 +98,9 @@ static int uncore_read_ratio(struct uncore_data *data, unsigned int *min,
 	u64 cap;
 	int ret;

+	if (data->control_cpu < 0)
+		return -ENXIO;
+
 	ret = rdmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, &cap);
 	if (ret)
 		return ret;
@ -116,6 +120,11 @@ static int uncore_write_ratio(struct uncore_data *data, unsigned int input,

 	mutex_lock(&uncore_lock);

+	if (data->control_cpu < 0) {
+		ret = -ENXIO;
+		goto finish_write;
+	}
+
 	input /= UNCORE_FREQ_KHZ_MULTIPLIER;
 	if (!input || input > 0x7F) {
 		ret = -EINVAL;
@ -217,15 +226,19 @@ static struct attribute *uncore_attrs[] = {
 	NULL
 };

+static void uncore_sysfs_entry_release(struct kobject *kobj)
+{
+	struct uncore_data *data = to_uncore_data(kobj);
+
+	complete(&data->kobj_unregister);
+}
+
 static struct kobj_type uncore_ktype = {
+	.release = uncore_sysfs_entry_release,
 	.sysfs_ops = &kobj_sysfs_ops,
 	.default_attrs = uncore_attrs,
 };

-static struct kobj_type uncore_root_ktype = {
-	.sysfs_ops = &kobj_sysfs_ops,
-};
-
 /* Caller provides protection */
 static struct uncore_data *uncore_get_instance(unsigned int cpu)
 {
@ -263,8 +276,10 @@ static void uncore_add_die_entry(int cpu)
 		uncore_read_ratio(data, &data->initial_min_freq_khz,
 				  &data->initial_max_freq_khz);

+		init_completion(&data->kobj_unregister);
+
 		ret = kobject_init_and_add(&data->kobj, &uncore_ktype,
-					   &uncore_root_kobj, str);
+					   uncore_root_kobj, str);
 		if (!ret) {
 			data->control_cpu = cpu;
 			data->valid = true;
@ -273,18 +288,15 @@ static void uncore_add_die_entry(int cpu)
 	mutex_unlock(&uncore_lock);
 }

-/* Last CPU in this die is offline, so remove sysfs entries */
+/* Last CPU in this die is offline, make control cpu invalid */
 static void uncore_remove_die_entry(int cpu)
 {
 	struct uncore_data *data;

 	mutex_lock(&uncore_lock);
 	data = uncore_get_instance(cpu);
-	if (data) {
-		kobject_put(&data->kobj);
+	if (data)
 		data->control_cpu = -1;
-		data->valid = false;
-	}
 	mutex_unlock(&uncore_lock);
 }

@ -384,11 +396,12 @@ static int __init intel_uncore_init(void)
 	if (!uncore_instances)
 		return -ENOMEM;

-	ret = kobject_init_and_add(&uncore_root_kobj, &uncore_root_ktype,
-				   &cpu_subsys.dev_root->kobj,
-				   "intel_uncore_frequency");
-	if (ret)
+	uncore_root_kobj = kobject_create_and_add("intel_uncore_frequency",
+						  &cpu_subsys.dev_root->kobj);
+	if (!uncore_root_kobj) {
+		ret = -ENOMEM;
 		goto err_free;
+	}

 	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
 				"platform/x86/uncore-freq:online",
@ -408,7 +421,7 @@ static int __init intel_uncore_init(void)
 err_rem_state:
 	cpuhp_remove_state(uncore_hp_state);
 err_rem_kobj:
-	kobject_put(&uncore_root_kobj);
+	kobject_put(uncore_root_kobj);
 err_free:
 	kfree(uncore_instances);

@ -423,10 +436,12 @@ static void __exit intel_uncore_exit(void)
 	unregister_pm_notifier(&uncore_pm_nb);
 	cpuhp_remove_state(uncore_hp_state);
 	for (i = 0; i < uncore_max_entries; ++i) {
-		if (uncore_instances[i].valid)
+		if (uncore_instances[i].valid) {
 			kobject_put(&uncore_instances[i].kobj);
+			wait_for_completion(&uncore_instances[i].kobj_unregister);
+		}
 	}
-	kobject_put(&uncore_root_kobj);
+	kobject_put(uncore_root_kobj);
 	kfree(uncore_instances);
 }
 module_exit(intel_uncore_exit)
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@ -26,6 +26,7 @@ static const struct acpi_device_id intel_vbtn_ids[] = {
 	{"INT33D6", 0},
 	{"", 0},
 };
+MODULE_DEVICE_TABLE(acpi, intel_vbtn_ids);

 /* In theory, these are HID usages. */
 static const struct key_entry intel_vbtn_keymap[] = {
@ -239,7 +240,6 @@ static struct platform_driver intel_vbtn_pl_driver = {
 	.probe = intel_vbtn_probe,
 	.remove = intel_vbtn_remove,
 };
-MODULE_DEVICE_TABLE(acpi, intel_vbtn_ids);

 static acpi_status __init
 check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv)
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/suspend.h>
 #include <linux/uaccess.h>

@ -193,7 +194,7 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"Fuse",                BIT(6)},
 	/*
 	 * Reserved for Cannon Lake but valid for Ice Lake, Comet Lake,
-	 * Tiger Lake and Elkhart Lake.
+	 * Tiger Lake, Elkhart Lake and Jasper Lake.
 	 */
 	{"SBR8",		BIT(7)},

@ -240,7 +241,7 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"HDA_PGD6",            BIT(4)},
 	/*
 	 * Reserved for Cannon Lake but valid for Ice Lake, Comet Lake,
-	 * Tiger Lake and ELkhart Lake.
+	 * Tiger Lake, ELkhart Lake and Jasper Lake.
 	 */
 	{"PSF6",		BIT(5)},
 	{"PSF7",		BIT(6)},
@ -273,7 +274,7 @@ static const struct pmc_bit_map *ext_icl_pfear_map[] = {
 };

 static const struct pmc_bit_map tgl_pfear_map[] = {
-	/* Tiger Lake and Elkhart Lake generation onwards only */
+	/* Tiger Lake, Elkhart Lake and Jasper Lake generation onwards only */
 	{"PSF9",		BIT(0)},
 	{"RES_66",		BIT(1)},
 	{"RES_67",		BIT(2)},
@ -408,13 +409,157 @@ static const struct pmc_reg_map icl_reg_map = {
 	.ltr_ignore_max = ICL_NUM_IP_IGN_ALLOWED,
 };

+static const struct pmc_bit_map tgl_lpm0_map[] = {
+	{"USB2PLL_OFF_STS",			BIT(18)},
+	{"PCIe/USB3.1_Gen2PLL_OFF_STS",		BIT(19)},
+	{"PCIe_Gen3PLL_OFF_STS",		BIT(20)},
+	{"OPIOPLL_OFF_STS",			BIT(21)},
+	{"OCPLL_OFF_STS",			BIT(22)},
+	{"AudioPLL_OFF_STS",			BIT(23)},
+	{"MIPIPLL_OFF_STS",			BIT(24)},
+	{"Fast_XTAL_Osc_OFF_STS",		BIT(25)},
+	{"AC_Ring_Osc_OFF_STS",			BIT(26)},
+	{"MC_Ring_Osc_OFF_STS",			BIT(27)},
+	{"SATAPLL_OFF_STS",			BIT(29)},
+	{"XTAL_USB2PLL_OFF_STS",		BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_lpm1_map[] = {
+	{"SPI_PG_STS",				BIT(2)},
+	{"xHCI_PG_STS",				BIT(3)},
+	{"PCIe_Ctrller_A_PG_STS",		BIT(4)},
+	{"PCIe_Ctrller_B_PG_STS",		BIT(5)},
+	{"PCIe_Ctrller_C_PG_STS",		BIT(6)},
+	{"GBE_PG_STS",				BIT(7)},
+	{"SATA_PG_STS",				BIT(8)},
+	{"HDA0_PG_STS",				BIT(9)},
+	{"HDA1_PG_STS",				BIT(10)},
+	{"HDA2_PG_STS",				BIT(11)},
+	{"HDA3_PG_STS",				BIT(12)},
+	{"PCIe_Ctrller_D_PG_STS",		BIT(13)},
+	{"ISIO_PG_STS",				BIT(14)},
+	{"SMB_PG_STS",				BIT(16)},
+	{"ISH_PG_STS",				BIT(17)},
+	{"ITH_PG_STS",				BIT(19)},
+	{"SDX_PG_STS",				BIT(20)},
+	{"xDCI_PG_STS",				BIT(25)},
+	{"DCI_PG_STS",				BIT(26)},
+	{"CSME0_PG_STS",			BIT(27)},
+	{"CSME_KVM_PG_STS",			BIT(28)},
+	{"CSME1_PG_STS",			BIT(29)},
+	{"CSME_CLINK_PG_STS",			BIT(30)},
+	{"CSME2_PG_STS",			BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_lpm2_map[] = {
+	{"ADSP_D3_STS",				BIT(0)},
+	{"SATA_D3_STS",				BIT(1)},
+	{"xHCI0_D3_STS",			BIT(2)},
+	{"xDCI1_D3_STS",			BIT(5)},
+	{"SDX_D3_STS",				BIT(6)},
+	{"EMMC_D3_STS",				BIT(7)},
+	{"IS_D3_STS",				BIT(8)},
+	{"THC0_D3_STS",				BIT(9)},
+	{"THC1_D3_STS",				BIT(10)},
+	{"GBE_D3_STS",				BIT(11)},
+	{"GBE_TSN_D3_STS",			BIT(12)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_lpm3_map[] = {
+	{"GPIO_COM0_VNN_REQ_STS",		BIT(1)},
+	{"GPIO_COM1_VNN_REQ_STS",		BIT(2)},
+	{"GPIO_COM2_VNN_REQ_STS",		BIT(3)},
+	{"GPIO_COM3_VNN_REQ_STS",		BIT(4)},
+	{"GPIO_COM4_VNN_REQ_STS",		BIT(5)},
+	{"GPIO_COM5_VNN_REQ_STS",		BIT(6)},
+	{"Audio_VNN_REQ_STS",			BIT(7)},
+	{"ISH_VNN_REQ_STS",			BIT(8)},
+	{"CNVI_VNN_REQ_STS",			BIT(9)},
+	{"eSPI_VNN_REQ_STS",			BIT(10)},
+	{"Display_VNN_REQ_STS",			BIT(11)},
+	{"DTS_VNN_REQ_STS",			BIT(12)},
+	{"SMBUS_VNN_REQ_STS",			BIT(14)},
+	{"CSME_VNN_REQ_STS",			BIT(15)},
+	{"SMLINK0_VNN_REQ_STS",			BIT(16)},
+	{"SMLINK1_VNN_REQ_STS",			BIT(17)},
+	{"CLINK_VNN_REQ_STS",			BIT(20)},
+	{"DCI_VNN_REQ_STS",			BIT(21)},
+	{"ITH_VNN_REQ_STS",			BIT(22)},
+	{"CSME_VNN_REQ_STS",			BIT(24)},
+	{"GBE_VNN_REQ_STS",			BIT(25)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_lpm4_map[] = {
+	{"CPU_C10_REQ_STS_0",			BIT(0)},
+	{"PCIe_LPM_En_REQ_STS_3",		BIT(3)},
+	{"ITH_REQ_STS_5",			BIT(5)},
+	{"CNVI_REQ_STS_6",			BIT(6)},
+	{"ISH_REQ_STS_7",			BIT(7)},
+	{"USB2_SUS_PG_Sys_REQ_STS_10",		BIT(10)},
+	{"PCIe_Clk_REQ_STS_12",			BIT(12)},
+	{"MPHY_Core_DL_REQ_STS_16",		BIT(16)},
+	{"Break-even_En_REQ_STS_17",		BIT(17)},
+	{"Auto-demo_En_REQ_STS_18",		BIT(18)},
+	{"MPHY_SUS_REQ_STS_22",			BIT(22)},
+	{"xDCI_attached_REQ_STS_24",		BIT(24)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_lpm5_map[] = {
+	{"LSX_Wake0_En_STS",			BIT(0)},
+	{"LSX_Wake0_Pol_STS",			BIT(1)},
+	{"LSX_Wake1_En_STS",			BIT(2)},
+	{"LSX_Wake1_Pol_STS",			BIT(3)},
+	{"LSX_Wake2_En_STS",			BIT(4)},
+	{"LSX_Wake2_Pol_STS",			BIT(5)},
+	{"LSX_Wake3_En_STS",			BIT(6)},
+	{"LSX_Wake3_Pol_STS",			BIT(7)},
+	{"LSX_Wake4_En_STS",			BIT(8)},
+	{"LSX_Wake4_Pol_STS",			BIT(9)},
+	{"LSX_Wake5_En_STS",			BIT(10)},
+	{"LSX_Wake5_Pol_STS",			BIT(11)},
+	{"LSX_Wake6_En_STS",			BIT(12)},
+	{"LSX_Wake6_Pol_STS",			BIT(13)},
+	{"LSX_Wake7_En_STS",			BIT(14)},
+	{"LSX_Wake7_Pol_STS",			BIT(15)},
+	{"Intel_Se_IO_Wake0_En_STS",		BIT(16)},
+	{"Intel_Se_IO_Wake0_Pol_STS",		BIT(17)},
+	{"Intel_Se_IO_Wake1_En_STS",		BIT(18)},
+	{"Intel_Se_IO_Wake1_Pol_STS",		BIT(19)},
+	{"Int_Timer_SS_Wake0_En_STS",		BIT(20)},
+	{"Int_Timer_SS_Wake0_Pol_STS",		BIT(21)},
+	{"Int_Timer_SS_Wake1_En_STS",		BIT(22)},
+	{"Int_Timer_SS_Wake1_Pol_STS",		BIT(23)},
+	{"Int_Timer_SS_Wake2_En_STS",		BIT(24)},
+	{"Int_Timer_SS_Wake2_Pol_STS",		BIT(25)},
+	{"Int_Timer_SS_Wake3_En_STS",		BIT(26)},
+	{"Int_Timer_SS_Wake3_Pol_STS",		BIT(27)},
+	{"Int_Timer_SS_Wake4_En_STS",		BIT(28)},
+	{"Int_Timer_SS_Wake4_Pol_STS",		BIT(29)},
+	{"Int_Timer_SS_Wake5_En_STS",		BIT(30)},
+	{"Int_Timer_SS_Wake5_Pol_STS",		BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map *tgl_lpm_maps[] = {
+	tgl_lpm0_map,
+	tgl_lpm1_map,
+	tgl_lpm2_map,
+	tgl_lpm3_map,
+	tgl_lpm4_map,
+	tgl_lpm5_map,
+	NULL
+};
+
 static const struct pmc_reg_map tgl_reg_map = {
 	.pfear_sts = ext_tgl_pfear_map,
 	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
-	.slps0_dbg_maps = cnp_slps0_dbg_maps,
 	.ltr_show_sts = cnp_ltr_show_map,
 	.msr_sts = msr_map,
-	.slps0_dbg_offset = CNP_PMC_SLPS0_DBG_OFFSET,
 	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
 	.regmap_length = CNP_PMC_MMIO_REG_LEN,
 	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
@ -422,6 +567,12 @@ static const struct pmc_reg_map tgl_reg_map = {
 	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
 	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
 	.ltr_ignore_max = TGL_NUM_IP_IGN_ALLOWED,
+	.lpm_modes = tgl_lpm_modes,
+	.lpm_en_offset = TGL_LPM_EN_OFFSET,
+	.lpm_residency_offset = TGL_LPM_RESIDENCY_OFFSET,
+	.lpm_sts = tgl_lpm_maps,
+	.lpm_status_offset = TGL_LPM_STATUS_OFFSET,
+	.lpm_live_status_offset = TGL_LPM_LIVE_STATUS_OFFSET,
 };

 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
@ -463,6 +614,84 @@ static int pmc_core_check_read_lock_bit(void)
 	return value & BIT(pmcdev->map->pm_read_disable_bit);
 }

+static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev,
+				   struct seq_file *s)
+{
+	const struct pmc_bit_map **maps = pmcdev->map->slps0_dbg_maps;
+	const struct pmc_bit_map *map;
+	int offset = pmcdev->map->slps0_dbg_offset;
+	u32 data;
+
+	while (*maps) {
+		map = *maps;
+		data = pmc_core_reg_read(pmcdev, offset);
+		offset += 4;
+		while (map->name) {
+			if (dev)
+				dev_dbg(dev, "SLP_S0_DBG: %-32s\tState: %s\n",
+					map->name,
+					data & map->bit_mask ? "Yes" : "No");
+			if (s)
+				seq_printf(s, "SLP_S0_DBG: %-32s\tState: %s\n",
+					   map->name,
+					   data & map->bit_mask ? "Yes" : "No");
+			++map;
+		}
+		++maps;
+	}
+}
+
+static int pmc_core_lpm_get_arr_size(const struct pmc_bit_map **maps)
+{
+	int idx;
+
+	for (idx = 0; maps[idx]; idx++)
+		;/* Nothing */
+
+	return idx;
+}
+
+static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev,
+				 struct seq_file *s, u32 offset,
+				 const char *str,
+				 const struct pmc_bit_map **maps)
+{
+	int index, idx, len = 32, bit_mask, arr_size;
+	u32 *lpm_regs;
+
+	arr_size = pmc_core_lpm_get_arr_size(maps);
+	lpm_regs = kmalloc_array(arr_size, sizeof(*lpm_regs), GFP_KERNEL);
+	if (!lpm_regs)
+		return;
+
+	for (index = 0; index < arr_size; index++) {
+		lpm_regs[index] = pmc_core_reg_read(pmcdev, offset);
+		offset += 4;
+	}
+
+	for (idx = 0; idx < arr_size; idx++) {
+		if (dev)
+			dev_dbg(dev, "\nLPM_%s_%d:\t0x%x\n", str, idx,
+				lpm_regs[idx]);
+		if (s)
+			seq_printf(s, "\nLPM_%s_%d:\t0x%x\n", str, idx,
+				   lpm_regs[idx]);
+		for (index = 0; maps[idx][index].name && index < len; index++) {
+			bit_mask = maps[idx][index].bit_mask;
+			if (dev)
+				dev_dbg(dev, "%-30s %-30d\n",
+					maps[idx][index].name,
+					lpm_regs[idx] & bit_mask ? 1 : 0);
+			if (s)
+				seq_printf(s, "%-30s %-30d\n",
+					   maps[idx][index].name,
+					   lpm_regs[idx] & bit_mask ? 1 : 0);
+		}
+	}
+
+	kfree(lpm_regs);
+}
+
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 static bool slps0_dbg_latch;

@ -698,27 +927,11 @@ out_unlock:
 static int pmc_core_slps0_dbg_show(struct seq_file *s, void *unused)
 {
 	struct pmc_dev *pmcdev = s->private;
-	const struct pmc_bit_map **maps = pmcdev->map->slps0_dbg_maps;
-	const struct pmc_bit_map *map;
-	int offset;
-	u32 data;

 	pmc_core_slps0_dbg_latch(pmcdev, false);
-	offset = pmcdev->map->slps0_dbg_offset;
-	while (*maps) {
-		map = *maps;
-		data = pmc_core_reg_read(pmcdev, offset);
-		offset += 4;
-		while (map->name) {
-			seq_printf(s, "SLP_S0_DBG: %-32s\tState: %s\n",
-				   map->name,
-				   data & map->bit_mask ?
-				   "Yes" : "No");
-			++map;
-		}
-		++maps;
-	}
+	pmc_core_slps0_display(pmcdev, NULL, s);
 	pmc_core_slps0_dbg_latch(pmcdev, true);
+
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(pmc_core_slps0_dbg);
@ -794,6 +1007,51 @@ static int pmc_core_ltr_show(struct seq_file *s, void *unused)
 }
 DEFINE_SHOW_ATTRIBUTE(pmc_core_ltr);

+static int pmc_core_substate_res_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const char **lpm_modes = pmcdev->map->lpm_modes;
+	u32 offset = pmcdev->map->lpm_residency_offset;
+	u32 lpm_en;
+	int index;
+
+	lpm_en = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_en_offset);
+	seq_printf(s, "status substate residency\n");
+	for (index = 0; lpm_modes[index]; index++) {
+		seq_printf(s, "%7s %7s %-15u\n",
+			   BIT(index) & lpm_en ? "Enabled" : " ",
+			   lpm_modes[index], pmc_core_reg_read(pmcdev, offset));
+		offset += 4;
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_res);
+
+static int pmc_core_substate_sts_regs_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map **maps = pmcdev->map->lpm_sts;
+	u32 offset = pmcdev->map->lpm_status_offset;
+
+	pmc_core_lpm_display(pmcdev, NULL, s, offset, "STATUS", maps);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_sts_regs);
+
+static int pmc_core_substate_l_sts_regs_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map **maps = pmcdev->map->lpm_sts;
+	u32 offset = pmcdev->map->lpm_live_status_offset;
+
+	pmc_core_lpm_display(pmcdev, NULL, s, offset, "LIVE_STATUS", maps);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_l_sts_regs);
+
 static int pmc_core_pkgc_show(struct seq_file *s, void *unused)
 {
 	struct pmc_dev *pmcdev = s->private;
@ -859,6 +1117,21 @@ static void pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
 		debugfs_create_bool("slp_s0_dbg_latch", 0644,
 				    dir, &slps0_dbg_latch);
 	}
+
+	if (pmcdev->map->lpm_en_offset) {
+		debugfs_create_file("substate_residencies", 0444,
+				    pmcdev->dbgfs_dir, pmcdev,
+				    &pmc_core_substate_res_fops);
+	}
+
+	if (pmcdev->map->lpm_status_offset) {
+		debugfs_create_file("substate_status_registers", 0444,
+				    pmcdev->dbgfs_dir, pmcdev,
+				    &pmc_core_substate_sts_regs_fops);
+		debugfs_create_file("substate_live_status_registers", 0444,
+				    pmcdev->dbgfs_dir, pmcdev,
+				    &pmc_core_substate_l_sts_regs_fops);
+	}
 }
 #else
 static inline void pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
@ -883,6 +1156,7 @@ static const struct x86_cpu_id intel_pmc_core_ids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L,		&tgl_reg_map),
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		&tgl_reg_map),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&tgl_reg_map),
 	{}
 };

@ -1047,10 +1321,8 @@ static inline bool pmc_core_is_s0ix_failed(struct pmc_dev *pmcdev)
 static int pmc_core_resume(struct device *dev)
 {
 	struct pmc_dev *pmcdev = dev_get_drvdata(dev);
-	const struct pmc_bit_map **maps = pmcdev->map->slps0_dbg_maps;
-	int offset = pmcdev->map->slps0_dbg_offset;
-	const struct pmc_bit_map *map;
-	u32 data;
+	const struct pmc_bit_map **maps = pmcdev->map->lpm_sts;
+	int offset = pmcdev->map->lpm_status_offset;

 	if (!pmcdev->check_counters)
 		return 0;
@ -1068,18 +1340,11 @@ static int pmc_core_resume(struct device *dev)
 	/* The real interesting case - S0ix failed - lets ask PMC why. */
 	dev_warn(dev, "CPU did not enter SLP_S0!!! (S0ix cnt=%llu)\n",
 		 pmcdev->s0ix_counter);
-	while (*maps) {
-		map = *maps;
-		data = pmc_core_reg_read(pmcdev, offset);
-		offset += 4;
-		while (map->name) {
-			dev_dbg(dev, "SLP_S0_DBG: %-32s\tState: %s\n",
-				map->name,
-				data & map->bit_mask ? "Yes" : "No");
-			map++;
-		}
-		maps++;
-	}
+	if (pmcdev->map->slps0_dbg_maps)
+		pmc_core_slps0_display(pmcdev, dev, NULL);
+	if (pmcdev->map->lpm_sts)
+		pmc_core_lpm_display(pmcdev, dev, NULL, offset, "STATUS", maps);
+
 	return 0;
 }

--- a/drivers/platform/x86/intel_pmc_core.h
+++ b/drivers/platform/x86/intel_pmc_core.h
@ -188,6 +188,28 @@ enum ppfear_regs {

 #define TGL_NUM_IP_IGN_ALLOWED			22

+/*
+ * Tigerlake Power Management Controller register offsets
+ */
+#define TGL_LPM_EN_OFFSET			0x1C78
+#define TGL_LPM_RESIDENCY_OFFSET		0x1C80
+
+/* Tigerlake Low Power Mode debug registers */
+#define TGL_LPM_STATUS_OFFSET			0x1C3C
+#define TGL_LPM_LIVE_STATUS_OFFSET		0x1C5C
+
+const char *tgl_lpm_modes[] = {
+	"S0i2.0",
+	"S0i2.1",
+	"S0i2.2",
+	"S0i3.0",
+	"S0i3.1",
+	"S0i3.2",
+	"S0i3.3",
+	"S0i3.4",
+	NULL
+};
+
 struct pmc_bit_map {
 	const char *name;
 	u32 bit_mask;
@ -221,6 +243,7 @@ struct pmc_reg_map {
 	const struct pmc_bit_map **slps0_dbg_maps;
 	const struct pmc_bit_map *ltr_show_sts;
 	const struct pmc_bit_map *msr_sts;
+	const struct pmc_bit_map **lpm_sts;
 	const u32 slp_s0_offset;
 	const u32 ltr_ignore_offset;
 	const int regmap_length;
@ -231,6 +254,12 @@ struct pmc_reg_map {
 	const u32 slps0_dbg_offset;
 	const u32 ltr_ignore_max;
 	const u32 pm_vric1_offset;
+	/* Low Power Mode registers */
+	const char **lpm_modes;
+	const u32 lpm_en_offset;
+	const u32 lpm_residency_offset;
+	const u32 lpm_status_offset;
+	const u32 lpm_live_status_offset;
 };

 /**
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
@ -126,7 +126,7 @@ static void isst_if_remove(struct pci_dev *pdev)
 	struct isst_if_device *punit_dev;

 	punit_dev = pci_get_drvdata(pdev);
-	isst_if_cdev_unregister(ISST_IF_DEV_MBOX);
+	isst_if_cdev_unregister(ISST_IF_DEV_MMIO);
 	mutex_destroy(&punit_dev->mutex);
 }

--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@ -383,6 +383,14 @@ static const struct dmi_system_id critclk_systems[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "3I380D"),
 		},
 	},
+	{
+		/* pmc_plt_clk* - are used for ethernet controllers */
+		.ident = "Lex 2I385SW",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "2I385SW"),
+		},
+	},
 	{
 		/* pmc_plt_clk* - are used for ethernet controllers */
 		.ident = "Beckhoff CB3163",
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@ -827,10 +827,10 @@ static ssize_t sony_nc_handles_show(struct device *dev,
 	int i;

 	for (i = 0; i < ARRAY_SIZE(handles->cap); i++) {
-		len += snprintf(buffer + len, PAGE_SIZE - len, "0x%.4x ",
+		len += scnprintf(buffer + len, PAGE_SIZE - len, "0x%.4x ",
 				handles->cap[i]);
 	}
-	len += snprintf(buffer + len, PAGE_SIZE - len, "\n");
+	len += scnprintf(buffer + len, PAGE_SIZE - len, "\n");

 	return len;
 }
@ -2187,10 +2187,10 @@ static ssize_t sony_nc_thermal_profiles_show(struct device *dev,

 	for (cnt = 0; cnt < THM_PROFILE_MAX; cnt++) {
 		if (!cnt || (th_handle->profiles & cnt))
-			idx += snprintf(buffer + idx, PAGE_SIZE - idx, "%s ",
+			idx += scnprintf(buffer + idx, PAGE_SIZE - idx, "%s ",
 					snc_thermal_profiles[cnt]);
 	}
-	idx += snprintf(buffer + idx, PAGE_SIZE - idx, "\n");
+	idx += scnprintf(buffer + idx, PAGE_SIZE - idx, "\n");

 	return idx;
 }
--- a/drivers/platform/x86/surface3_power.c
+++ b/drivers/platform/x86/surface3_power.c
@ -0,0 +1,589 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Supports for the power IC on the Surface 3 tablet.
+ *
+ * (C) Copyright 2016-2018 Red Hat, Inc
+ * (C) Copyright 2016-2018 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * (C) Copyright 2016 Stephen Just <stephenjust@gmail.com>
+ *
+ * This driver has been reverse-engineered by parsing the DSDT of the Surface 3
+ * and looking at the registers of the chips.
+ *
+ * The DSDT allowed to find out that:
+ * - the driver is required for the ACPI BAT0 device to communicate to the chip
+ *   through an operation region.
+ * - the various defines for the operation region functions to communicate with
+ *   this driver
+ * - the DSM 3f99e367-6220-4955-8b0f-06ef2ae79412 allows to trigger ACPI
+ *   events to BAT0 (the code is all available in the DSDT).
+ *
+ * Further findings regarding the 2 chips declared in the MSHW0011 are:
+ * - there are 2 chips declared:
+ *   . 0x22 seems to control the ADP1 line status (and probably the charger)
+ *   . 0x55 controls the battery directly
+ * - the battery chip uses a SMBus protocol (using plain SMBus allows non
+ *   destructive commands):
+ *   . the commands/registers used are in the range 0x00..0x7F
+ *   . if bit 8 (0x80) is set in the SMBus command, the returned value is the
+ *     same as when it is not set. There is a high chance this bit is the
+ *     read/write
+ *   . the various registers semantic as been deduced by observing the register
+ *     dumps.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bits.h>
+#include <linux/freezer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/uuid.h>
+#include <asm/unaligned.h>
+
+#define SURFACE_3_POLL_INTERVAL		(2 * HZ)
+#define SURFACE_3_STRLEN		10
+
+struct mshw0011_data {
+	struct i2c_client	*adp1;
+	struct i2c_client	*bat0;
+	unsigned short		notify_mask;
+	struct task_struct	*poll_task;
+	bool			kthread_running;
+
+	bool			charging;
+	bool			bat_charging;
+	u8			trip_point;
+	s32			full_capacity;
+};
+
+struct mshw0011_handler_data {
+	struct acpi_connection_info	info;
+	struct i2c_client		*client;
+};
+
+struct bix {
+	u32	revision;
+	u32	power_unit;
+	u32	design_capacity;
+	u32	last_full_charg_capacity;
+	u32	battery_technology;
+	u32	design_voltage;
+	u32	design_capacity_of_warning;
+	u32	design_capacity_of_low;
+	u32	cycle_count;
+	u32	measurement_accuracy;
+	u32	max_sampling_time;
+	u32	min_sampling_time;
+	u32	max_average_interval;
+	u32	min_average_interval;
+	u32	battery_capacity_granularity_1;
+	u32	battery_capacity_granularity_2;
+	char	model[SURFACE_3_STRLEN];
+	char	serial[SURFACE_3_STRLEN];
+	char	type[SURFACE_3_STRLEN];
+	char	OEM[SURFACE_3_STRLEN];
+} __packed;
+
+struct bst {
+	u32	battery_state;
+	s32	battery_present_rate;
+	u32	battery_remaining_capacity;
+	u32	battery_present_voltage;
+} __packed;
+
+struct gsb_command {
+	u8	arg0;
+	u8	arg1;
+	u8	arg2;
+} __packed;
+
+struct gsb_buffer {
+	u8	status;
+	u8	len;
+	u8	ret;
+	union {
+		struct gsb_command	cmd;
+		struct bst		bst;
+		struct bix		bix;
+	} __packed;
+} __packed;
+
+#define ACPI_BATTERY_STATE_DISCHARGING	BIT(0)
+#define ACPI_BATTERY_STATE_CHARGING	BIT(1)
+#define ACPI_BATTERY_STATE_CRITICAL	BIT(2)
+
+#define MSHW0011_CMD_DEST_BAT0		0x01
+#define MSHW0011_CMD_DEST_ADP1		0x03
+
+#define MSHW0011_CMD_BAT0_STA		0x01
+#define MSHW0011_CMD_BAT0_BIX		0x02
+#define MSHW0011_CMD_BAT0_BCT		0x03
+#define MSHW0011_CMD_BAT0_BTM		0x04
+#define MSHW0011_CMD_BAT0_BST		0x05
+#define MSHW0011_CMD_BAT0_BTP		0x06
+#define MSHW0011_CMD_ADP1_PSR		0x07
+#define MSHW0011_CMD_BAT0_PSOC		0x09
+#define MSHW0011_CMD_BAT0_PMAX		0x0a
+#define MSHW0011_CMD_BAT0_PSRC		0x0b
+#define MSHW0011_CMD_BAT0_CHGI		0x0c
+#define MSHW0011_CMD_BAT0_ARTG		0x0d
+
+#define MSHW0011_NOTIFY_GET_VERSION	0x00
+#define MSHW0011_NOTIFY_ADP1		0x01
+#define MSHW0011_NOTIFY_BAT0_BST	0x02
+#define MSHW0011_NOTIFY_BAT0_BIX	0x05
+
+#define MSHW0011_ADP1_REG_PSR		0x04
+
+#define MSHW0011_BAT0_REG_CAPACITY		0x0c
+#define MSHW0011_BAT0_REG_FULL_CHG_CAPACITY	0x0e
+#define MSHW0011_BAT0_REG_DESIGN_CAPACITY	0x40
+#define MSHW0011_BAT0_REG_VOLTAGE	0x08
+#define MSHW0011_BAT0_REG_RATE		0x14
+#define MSHW0011_BAT0_REG_OEM		0x45
+#define MSHW0011_BAT0_REG_TYPE		0x4e
+#define MSHW0011_BAT0_REG_SERIAL_NO	0x56
+#define MSHW0011_BAT0_REG_CYCLE_CNT	0x6e
+
+#define MSHW0011_EV_2_5_MASK		GENMASK(8, 0)
+
+/* 3f99e367-6220-4955-8b0f-06ef2ae79412 */
+static const guid_t mshw0011_guid =
+	GUID_INIT(0x3F99E367, 0x6220, 0x4955, 0x8B, 0x0F, 0x06, 0xEF,
+		  0x2A, 0xE7, 0x94, 0x12);
+
+static int
+mshw0011_notify(struct mshw0011_data *cdata, u8 arg1, u8 arg2,
+		unsigned int *ret_value)
+{
+	union acpi_object *obj;
+	struct acpi_device *adev;
+	acpi_handle handle;
+	unsigned int i;
+
+	handle = ACPI_HANDLE(&cdata->adp1->dev);
+	if (!handle || acpi_bus_get_device(handle, &adev))
+		return -ENODEV;
+
+	obj = acpi_evaluate_dsm_typed(handle, &mshw0011_guid, arg1, arg2, NULL,
+				      ACPI_TYPE_BUFFER);
+	if (!obj) {
+		dev_err(&cdata->adp1->dev, "device _DSM execution failed\n");
+		return -ENODEV;
+	}
+
+	*ret_value = 0;
+	for (i = 0; i < obj->buffer.length; i++)
+		*ret_value |= obj->buffer.pointer[i] << (i * 8);
+
+	ACPI_FREE(obj);
+	return 0;
+}
+
+static const struct bix default_bix = {
+	.revision = 0x00,
+	.power_unit = 0x01,
+	.design_capacity = 0x1dca,
+	.last_full_charg_capacity = 0x1dca,
+	.battery_technology = 0x01,
+	.design_voltage = 0x10df,
+	.design_capacity_of_warning = 0x8f,
+	.design_capacity_of_low = 0x47,
+	.cycle_count = 0xffffffff,
+	.measurement_accuracy = 0x00015f90,
+	.max_sampling_time = 0x03e8,
+	.min_sampling_time = 0x03e8,
+	.max_average_interval = 0x03e8,
+	.min_average_interval = 0x03e8,
+	.battery_capacity_granularity_1 = 0x45,
+	.battery_capacity_granularity_2 = 0x11,
+	.model = "P11G8M",
+	.serial = "",
+	.type = "LION",
+	.OEM = "",
+};
+
+static int mshw0011_bix(struct mshw0011_data *cdata, struct bix *bix)
+{
+	struct i2c_client *client = cdata->bat0;
+	char buf[SURFACE_3_STRLEN];
+	int ret;
+
+	*bix = default_bix;
+
+	/* get design capacity */
+	ret = i2c_smbus_read_word_data(client,
+				       MSHW0011_BAT0_REG_DESIGN_CAPACITY);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading design capacity: %d\n",
+			ret);
+		return ret;
+	}
+	bix->design_capacity = ret;
+
+	/* get last full charge capacity */
+	ret = i2c_smbus_read_word_data(client,
+				       MSHW0011_BAT0_REG_FULL_CHG_CAPACITY);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"Error reading last full charge capacity: %d\n", ret);
+		return ret;
+	}
+	bix->last_full_charg_capacity = ret;
+
+	/* get serial number */
+	ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_SERIAL_NO,
+					    sizeof(buf), buf);
+	if (ret != sizeof(buf)) {
+		dev_err(&client->dev, "Error reading serial no: %d\n", ret);
+		return ret;
+	}
+	snprintf(bix->serial, ARRAY_SIZE(bix->serial), "%3pE%6pE", buf + 7, buf);
+
+	/* get cycle count */
+	ret = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CYCLE_CNT);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading cycle count: %d\n", ret);
+		return ret;
+	}
+	bix->cycle_count = ret;
+
+	/* get OEM name */
+	ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_OEM,
+					    4, buf);
+	if (ret != 4) {
+		dev_err(&client->dev, "Error reading cycle count: %d\n", ret);
+		return ret;
+	}
+	snprintf(bix->OEM, ARRAY_SIZE(bix->OEM), "%3pE", buf);
+
+	return 0;
+}
+
+static int mshw0011_bst(struct mshw0011_data *cdata, struct bst *bst)
+{
+	struct i2c_client *client = cdata->bat0;
+	int rate, capacity, voltage, state;
+	s16 tmp;
+
+	rate = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_RATE);
+	if (rate < 0)
+		return rate;
+
+	capacity = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CAPACITY);
+	if (capacity < 0)
+		return capacity;
+
+	voltage = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_VOLTAGE);
+	if (voltage < 0)
+		return voltage;
+
+	tmp = rate;
+	bst->battery_present_rate = abs((s32)tmp);
+
+	state = 0;
+	if ((s32) tmp > 0)
+		state |= ACPI_BATTERY_STATE_CHARGING;
+	else if ((s32) tmp < 0)
+		state |= ACPI_BATTERY_STATE_DISCHARGING;
+	bst->battery_state = state;
+
+	bst->battery_remaining_capacity = capacity;
+	bst->battery_present_voltage = voltage;
+
+	return 0;
+}
+
+static int mshw0011_adp_psr(struct mshw0011_data *cdata)
+{
+	return i2c_smbus_read_byte_data(cdata->adp1, MSHW0011_ADP1_REG_PSR);
+}
+
+static int mshw0011_isr(struct mshw0011_data *cdata)
+{
+	struct bst bst;
+	struct bix bix;
+	int ret;
+	bool status, bat_status;
+
+	ret = mshw0011_adp_psr(cdata);
+	if (ret < 0)
+		return ret;
+
+	status = ret;
+	if (status != cdata->charging)
+		mshw0011_notify(cdata, cdata->notify_mask,
+				MSHW0011_NOTIFY_ADP1, &ret);
+
+	cdata->charging = status;
+
+	ret = mshw0011_bst(cdata, &bst);
+	if (ret < 0)
+		return ret;
+
+	bat_status = bst.battery_state;
+	if (bat_status != cdata->bat_charging)
+		mshw0011_notify(cdata, cdata->notify_mask,
+				MSHW0011_NOTIFY_BAT0_BST, &ret);
+
+	cdata->bat_charging = bat_status;
+
+	ret = mshw0011_bix(cdata, &bix);
+	if (ret < 0)
+		return ret;
+
+	if (bix.last_full_charg_capacity != cdata->full_capacity)
+		mshw0011_notify(cdata, cdata->notify_mask,
+				MSHW0011_NOTIFY_BAT0_BIX, &ret);
+
+	cdata->full_capacity = bix.last_full_charg_capacity;
+
+	return 0;
+}
+
+static int mshw0011_poll_task(void *data)
+{
+	struct mshw0011_data *cdata = data;
+	int ret = 0;
+
+	cdata->kthread_running = true;
+
+	set_freezable();
+
+	while (!kthread_should_stop()) {
+		schedule_timeout_interruptible(SURFACE_3_POLL_INTERVAL);
+		try_to_freeze();
+		ret = mshw0011_isr(data);
+		if (ret)
+			break;
+	}
+
+	cdata->kthread_running = false;
+	return ret;
+}
+
+static acpi_status
+mshw0011_space_handler(u32 function, acpi_physical_address command,
+			u32 bits, u64 *value64,
+			void *handler_context, void *region_context)
+{
+	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
+	struct mshw0011_handler_data *data = handler_context;
+	struct acpi_connection_info *info = &data->info;
+	struct acpi_resource_i2c_serialbus *sb;
+	struct i2c_client *client = data->client;
+	struct mshw0011_data *cdata = i2c_get_clientdata(client);
+	struct acpi_resource *ares;
+	u32 accessor_type = function >> 16;
+	acpi_status ret;
+	int status = 1;
+
+	ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
+	if (ACPI_FAILURE(ret))
+		return ret;
+
+	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	sb = &ares->data.i2c_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	if (accessor_type != ACPI_GSB_ACCESS_ATTRIB_RAW_PROCESS) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	if (gsb->cmd.arg0 == MSHW0011_CMD_DEST_ADP1 &&
+	    gsb->cmd.arg1 == MSHW0011_CMD_ADP1_PSR) {
+		status = mshw0011_adp_psr(cdata);
+		if (status >= 0) {
+			ret = AE_OK;
+			goto out;
+		} else {
+			ret = AE_ERROR;
+			goto err;
+		}
+	}
+
+	if (gsb->cmd.arg0 != MSHW0011_CMD_DEST_BAT0) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	switch (gsb->cmd.arg1) {
+	case MSHW0011_CMD_BAT0_STA:
+		break;
+	case MSHW0011_CMD_BAT0_BIX:
+		ret = mshw0011_bix(cdata, &gsb->bix);
+		break;
+	case MSHW0011_CMD_BAT0_BTP:
+		cdata->trip_point = gsb->cmd.arg2;
+		break;
+	case MSHW0011_CMD_BAT0_BST:
+		ret = mshw0011_bst(cdata, &gsb->bst);
+		break;
+	default:
+		dev_info(&cdata->bat0->dev, "command(0x%02x) is not supported.\n", gsb->cmd.arg1);
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+ out:
+	gsb->ret = status;
+	gsb->status = 0;
+
+ err:
+	ACPI_FREE(ares);
+	return ret;
+}
+
+static int mshw0011_install_space_handler(struct i2c_client *client)
+{
+	acpi_handle handle;
+	struct mshw0011_handler_data *data;
+	acpi_status status;
+
+	handle = ACPI_HANDLE(&client->dev);
+	if (!handle)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct mshw0011_handler_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	status = acpi_bus_attach_private_data(handle, (void *)data);
+	if (ACPI_FAILURE(status)) {
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	status = acpi_install_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&mshw0011_space_handler,
+				NULL,
+				data);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&client->dev, "Error installing i2c space handler\n");
+		acpi_bus_detach_private_data(handle);
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	acpi_walk_dep_device_list(handle);
+	return 0;
+}
+
+static void mshw0011_remove_space_handler(struct i2c_client *client)
+{
+	struct mshw0011_handler_data *data;
+	acpi_handle handle;
+	acpi_status status;
+
+	handle = ACPI_HANDLE(&client->dev);
+	if (!handle)
+		return;
+
+	acpi_remove_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&mshw0011_space_handler);
+
+	status = acpi_bus_get_private_data(handle, (void **)&data);
+	if (ACPI_SUCCESS(status))
+		kfree(data);
+
+	acpi_bus_detach_private_data(handle);
+}
+
+static int mshw0011_probe(struct i2c_client *client)
+{
+	struct i2c_board_info board_info;
+	struct device *dev = &client->dev;
+	struct i2c_client *bat0;
+	struct mshw0011_data *data;
+	int error, mask;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->adp1 = client;
+	i2c_set_clientdata(client, data);
+
+	memset(&board_info, 0, sizeof(board_info));
+	strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
+
+	bat0 = i2c_acpi_new_device(dev, 1, &board_info);
+	if (!bat0)
+		return -ENOMEM;
+
+	data->bat0 = bat0;
+	i2c_set_clientdata(bat0, data);
+
+	error = mshw0011_notify(data, 1, MSHW0011_NOTIFY_GET_VERSION, &mask);
+	if (error)
+		goto out_err;
+
+	data->notify_mask = mask == MSHW0011_EV_2_5_MASK;
+
+	data->poll_task = kthread_run(mshw0011_poll_task, data, "mshw0011_adp");
+	if (IS_ERR(data->poll_task)) {
+		error = PTR_ERR(data->poll_task);
+		dev_err(&client->dev, "Unable to run kthread err %d\n", error);
+		goto out_err;
+	}
+
+	error = mshw0011_install_space_handler(client);
+	if (error)
+		goto out_err;
+
+	return 0;
+
+out_err:
+	if (data->kthread_running)
+		kthread_stop(data->poll_task);
+	i2c_unregister_device(data->bat0);
+	return error;
+}
+
+static int mshw0011_remove(struct i2c_client *client)
+{
+	struct mshw0011_data *cdata = i2c_get_clientdata(client);
+
+	mshw0011_remove_space_handler(client);
+
+	if (cdata->kthread_running)
+		kthread_stop(cdata->poll_task);
+
+	i2c_unregister_device(cdata->bat0);
+
+	return 0;
+}
+
+static const struct acpi_device_id mshw0011_acpi_match[] = {
+	{ "MSHW0011", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, mshw0011_acpi_match);
+
+static struct i2c_driver mshw0011_driver = {
+	.probe_new = mshw0011_probe,
+	.remove = mshw0011_remove,
+	.driver = {
+		.name = "mshw0011",
+		.acpi_match_table = mshw0011_acpi_match,
+	},
+};
+module_i2c_driver(mshw0011_driver);
+
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
+MODULE_DESCRIPTION("mshw0011 driver");
+MODULE_LICENSE("GPL v2");
--- a/tools/power/x86/intel-speed-select/isst-config.c
+++ b/tools/power/x86/intel-speed-select/isst-config.c
--- a/tools/power/x86/intel-speed-select/isst-core.c
+++ b/tools/power/x86/intel-speed-select/isst-core.c
@ -114,8 +114,10 @@ int isst_get_tdp_info(int cpu, int config_index,

 	ret = isst_send_mbox_command(cpu, CONFIG_TDP, CONFIG_TDP_GET_TDP_INFO,
 				     0, config_index, &resp);
-	if (ret)
+	if (ret) {
+		isst_display_error_info_message(1, "Invalid level, Can't get TDP information at level", 1, config_index);
 		return ret;
+	}

 	ctdp_level->pkg_tdp = resp & GENMASK(14, 0);
 	ctdp_level->tdp_ratio = (resp & GENMASK(23, 16)) >> 16;
@ -352,7 +354,7 @@ int isst_set_tdp_level_msr(int cpu, int tdp_level)
 	debug_printf("cpu: tdp_level via MSR %d\n", cpu, tdp_level);

 	if (isst_get_config_tdp_lock_status(cpu)) {
-		debug_printf("cpu: tdp_locked %d\n", cpu);
+		isst_display_error_info_message(1, "tdp_locked", 0, 0);
 		return -1;
 	}

@ -373,19 +375,50 @@ int isst_set_tdp_level(int cpu, int tdp_level)
 	unsigned int resp;
 	int ret;

+
+	if (isst_get_config_tdp_lock_status(cpu)) {
+		isst_display_error_info_message(1, "TDP is locked", 0, 0);
+		return -1;
+
+	}
+
 	ret = isst_send_mbox_command(cpu, CONFIG_TDP, CONFIG_TDP_SET_LEVEL, 0,
 				     tdp_level, &resp);
-	if (ret)
-		return isst_set_tdp_level_msr(cpu, tdp_level);
+	if (ret) {
+		isst_display_error_info_message(1, "Set TDP level failed for level", 1, tdp_level);
+		return ret;
+	}

 	return 0;
 }

 int isst_get_pbf_info(int cpu, int level, struct isst_pbf_info *pbf_info)
 {
+	struct isst_pkg_ctdp_level_info ctdp_level;
+	struct isst_pkg_ctdp pkg_dev;
 	int i, ret, core_cnt, max;
 	unsigned int req, resp;

+	ret = isst_get_ctdp_levels(cpu, &pkg_dev);
+	if (ret) {
+		isst_display_error_info_message(1, "Failed to get number of levels", 0, 0);
+		return ret;
+	}
+
+	if (level > pkg_dev.levels) {
+		isst_display_error_info_message(1, "Invalid level", 1, level);
+		return -1;
+	}
+
+	ret = isst_get_ctdp_control(cpu, level, &ctdp_level);
+	if (ret)
+		return ret;
+
+	if (!ctdp_level.pbf_support) {
+		isst_display_error_info_message(1, "base-freq feature is not present at this level", 1, level);
+		return -1;
+	}
+
 	pbf_info->core_cpumask_size = alloc_cpu_set(&pbf_info->core_cpumask);

 	core_cnt = get_core_count(get_physical_package_id(cpu), get_physical_die_id(cpu));
@ -481,6 +514,10 @@ int isst_set_pbf_fact_status(int cpu, int pbf, int enable)
 		else
 			req &= ~BIT(17);
 	} else {
+
+		if (enable && !ctdp_level.sst_cp_enabled)
+			isst_display_error_info_message(0, "Make sure to execute before: core-power enable", 0, 0);
+
 		if (ctdp_level.pbf_enabled)
 			req = BIT(17);

@ -566,10 +603,32 @@ int isst_get_fact_bucket_info(int cpu, int level,
 	return 0;
 }

-int isst_get_fact_info(int cpu, int level, struct isst_fact_info *fact_info)
+int isst_get_fact_info(int cpu, int level, int fact_bucket, struct isst_fact_info *fact_info)
 {
+	struct isst_pkg_ctdp_level_info ctdp_level;
+	struct isst_pkg_ctdp pkg_dev;
 	unsigned int resp;
-	int ret;
+	int j, ret, print;
+
+	ret = isst_get_ctdp_levels(cpu, &pkg_dev);
+	if (ret) {
+		isst_display_error_info_message(1, "Failed to get number of levels", 0, 0);
+		return ret;
+	}
+
+	if (level > pkg_dev.levels) {
+		isst_display_error_info_message(1, "Invalid level", 1, level);
+		return -1;
+	}
+
+	ret = isst_get_ctdp_control(cpu, level, &ctdp_level);
+	if (ret)
+		return ret;
+
+	if (!ctdp_level.fact_support) {
+		isst_display_error_info_message(1, "turbo-freq feature is not present at this level", 1, level);
+		return -1;
+	}

 	ret = isst_send_mbox_command(cpu, CONFIG_TDP,
 				     CONFIG_TDP_GET_FACT_LP_CLIPPING_RATIO, 0,
@ -585,8 +644,25 @@ int isst_get_fact_info(int cpu, int level, struct isst_fact_info *fact_info)
 	fact_info->lp_clipping_ratio_license_avx512 = (resp >> 16) & 0xff;

 	ret = isst_get_fact_bucket_info(cpu, level, fact_info->bucket_info);
+	if (ret)
+		return ret;

-	return ret;
+	print = 0;
+	for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) {
+		if (fact_bucket != 0xff && fact_bucket != j)
+			continue;
+
+		if (!fact_info->bucket_info[j].high_priority_cores_count)
+			break;
+
+		print = 1;
+	}
+	if (!print) {
+		isst_display_error_info_message(1, "Invalid bucket", 0, 0);
+		return -1;
+	}
+
+	return 0;
 }

 int isst_set_trl(int cpu, unsigned long long trl)
@ -671,7 +747,7 @@ void isst_get_process_ctdp_complete(int cpu, struct isst_pkg_ctdp *pkg_dev)

 int isst_get_process_ctdp(int cpu, int tdp_level, struct isst_pkg_ctdp *pkg_dev)
 {
-	int i, ret;
+	int i, ret, valid = 0;

 	if (pkg_dev->processed)
 		return 0;
@ -684,6 +760,14 @@ int isst_get_process_ctdp(int cpu, int tdp_level, struct isst_pkg_ctdp *pkg_dev)
 		     cpu, pkg_dev->enabled, pkg_dev->current_level,
 		     pkg_dev->levels);

+	if (tdp_level != 0xff && tdp_level > pkg_dev->levels) {
+		isst_display_error_info_message(1, "Invalid level", 0, 0);
+		return -1;
+	}
+
+	if (!pkg_dev->enabled)
+		isst_display_error_info_message(0, "perf-profile feature is not supported, just base-config level 0 is valid", 0, 0);
+
 	for (i = 0; i <= pkg_dev->levels; ++i) {
 		struct isst_pkg_ctdp_level_info *ctdp_level;

@ -703,6 +787,7 @@ int isst_get_process_ctdp(int cpu, int tdp_level, struct isst_pkg_ctdp *pkg_dev)
 		if (ret)
 			continue;

+		valid = 1;
 		pkg_dev->processed = 1;
 		ctdp_level->processed = 1;

@ -713,7 +798,7 @@ int isst_get_process_ctdp(int cpu, int tdp_level, struct isst_pkg_ctdp *pkg_dev)
 		}

 		if (ctdp_level->fact_support) {
-			ret = isst_get_fact_info(cpu, i,
+			ret = isst_get_fact_info(cpu, i, 0xff,
 						 &ctdp_level->fact_info);
 			if (ret)
 				return ret;
@ -775,6 +860,9 @@ int isst_get_process_ctdp(int cpu, int tdp_level, struct isst_pkg_ctdp *pkg_dev)
 		isst_get_uncore_mem_freq(cpu, i, ctdp_level);
 	}

+	if (!valid)
+		isst_display_error_info_message(0, "Invalid level, Can't get TDP control information at specified levels on cpu", 1, cpu);
+
 	return 0;
 }

@ -829,17 +917,19 @@ int isst_pm_qos_config(int cpu, int enable_clos, int priority_type)
 		}
 		ret = isst_write_pm_config(cpu, 0);
 		if (ret)
-			perror("isst_write_pm_config\n");
+			isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error\n", 0, 0);
 	} else {
 		ret = isst_write_pm_config(cpu, 1);
 		if (ret)
-			perror("isst_write_pm_config\n");
+			isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error\n", 0, 0);
 	}

 	ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0,
 				     &resp);
-	if (ret)
+	if (ret) {
+		isst_display_error_info_message(1, "CLOS_PM_QOS_CONFIG command failed", 0, 0);
 		return ret;
+	}

 	debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", cpu, resp);

@ -850,6 +940,9 @@ int isst_pm_qos_config(int cpu, int enable_clos, int priority_type)
 	else
 		req = req & ~BIT(1);

+	if (priority_type > 1)
+		isst_display_error_info_message(1, "Invalid priority type: Changing type to ordered", 0, 0);
+
 	if (priority_type)
 		req = req | BIT(2);
 	else
--- a/tools/power/x86/intel-speed-select/isst-display.c
+++ b/tools/power/x86/intel-speed-select/isst-display.c
@ -158,10 +158,17 @@ static void format_and_print(FILE *outf, int level, char *header, char *value)
 	last_level = level;
 }

-static void print_package_info(int cpu, FILE *outf)
+static int print_package_info(int cpu, FILE *outf)
 {
 	char header[256];

+	if (out_format_is_json()) {
+		snprintf(header, sizeof(header), "package-%d:die-%d:cpu-%d",
+			 get_physical_package_id(cpu), get_physical_die_id(cpu),
+			 cpu);
+		format_and_print(outf, 1, header, NULL);
+		return 1;
+	}
 	snprintf(header, sizeof(header), "package-%d",
 		 get_physical_package_id(cpu));
 	format_and_print(outf, 1, header, NULL);
@ -169,6 +176,8 @@ static void print_package_info(int cpu, FILE *outf)
 	format_and_print(outf, 2, header, NULL);
 	snprintf(header, sizeof(header), "cpu-%d", cpu);
 	format_and_print(outf, 3, header, NULL);
+
+	return 3;
 }

 static void _isst_pbf_display_information(int cpu, FILE *outf, int level,
@ -178,7 +187,7 @@ static void _isst_pbf_display_information(int cpu, FILE *outf, int level,
 	char header[256];
 	char value[256];

-	snprintf(header, sizeof(header), "speed-select-base-freq");
+	snprintf(header, sizeof(header), "speed-select-base-freq-properties");
 	format_and_print(outf, disp_level, header, NULL);

 	snprintf(header, sizeof(header), "high-priority-base-frequency(MHz)");
@ -222,9 +231,23 @@ static void _isst_fact_display_information(int cpu, FILE *outf, int level,
 	struct isst_fact_bucket_info *bucket_info = fact_info->bucket_info;
 	char header[256];
 	char value[256];
-	int j;
+	int print = 0, j;

-	snprintf(header, sizeof(header), "speed-select-turbo-freq");
+	for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) {
+		if (fact_bucket != 0xff && fact_bucket != j)
+			continue;
+
+		if (!bucket_info[j].high_priority_cores_count)
+			break;
+
+		print = 1;
+	}
+	if (!print) {
+		fprintf(stderr, "Invalid bucket\n");
+		return;
+	}
+
+	snprintf(header, sizeof(header), "speed-select-turbo-freq-properties");
 	format_and_print(outf, base_level, header, NULL);
 	for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) {
 		if (fact_bucket != 0xff && fact_bucket != j)
@ -289,7 +312,7 @@ static void _isst_fact_display_information(int cpu, FILE *outf, int level,
 }

 void isst_ctdp_display_core_info(int cpu, FILE *outf, char *prefix,
-				 unsigned int val)
+				 unsigned int val, char *str0, char *str1)
 {
 	char header[256];
 	char value[256];
@ -301,8 +324,12 @@ void isst_ctdp_display_core_info(int cpu, FILE *outf, char *prefix,
 	format_and_print(outf, 2, header, NULL);
 	snprintf(header, sizeof(header), "cpu-%d", cpu);
 	format_and_print(outf, 3, header, NULL);
-
-	snprintf(value, sizeof(value), "%u", val);
+	if (str0 && !val)
+		snprintf(value, sizeof(value), "%s", str0);
+	else if (str1 && val)
+		snprintf(value, sizeof(value), "%s", str1);
+	else
+		snprintf(value, sizeof(value), "%u", val);
 	format_and_print(outf, 4, prefix, value);

 	format_and_print(outf, 1, NULL, NULL);
@ -313,10 +340,11 @@ void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level,
 {
 	char header[256];
 	char value[256];
-	int i, base_level = 1;
+	static int level;
+	int i;

 	if (pkg_dev->processed)
-		print_package_info(cpu, outf);
+		level = print_package_info(cpu, outf);

 	for (i = 0; i <= pkg_dev->levels; ++i) {
 		struct isst_pkg_ctdp_level_info *ctdp_level;
@ -328,72 +356,80 @@ void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level,

 		snprintf(header, sizeof(header), "perf-profile-level-%d",
 			 ctdp_level->level);
-		format_and_print(outf, base_level + 3, header, NULL);
+		format_and_print(outf, level + 1, header, NULL);

 		snprintf(header, sizeof(header), "cpu-count");
 		j = get_cpu_count(get_physical_die_id(cpu),
 				  get_physical_die_id(cpu));
 		snprintf(value, sizeof(value), "%d", j);
-		format_and_print(outf, base_level + 4, header, value);
+		format_and_print(outf, level + 2, header, value);
+
+		j = CPU_COUNT_S(ctdp_level->core_cpumask_size,
+				ctdp_level->core_cpumask);
+		if (j) {
+			snprintf(header, sizeof(header), "enable-cpu-count");
+			snprintf(value, sizeof(value), "%d", j);
+			format_and_print(outf, level + 2, header, value);
+		}

 		if (ctdp_level->core_cpumask_size) {
 			snprintf(header, sizeof(header), "enable-cpu-mask");
 			printcpumask(sizeof(value), value,
 				     ctdp_level->core_cpumask_size,
 				     ctdp_level->core_cpumask);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);

 			snprintf(header, sizeof(header), "enable-cpu-list");
 			printcpulist(sizeof(value), value,
 				     ctdp_level->core_cpumask_size,
 				     ctdp_level->core_cpumask);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);
 		}

 		snprintf(header, sizeof(header), "thermal-design-power-ratio");
 		snprintf(value, sizeof(value), "%d", ctdp_level->tdp_ratio);
-		format_and_print(outf, base_level + 4, header, value);
+		format_and_print(outf, level + 2, header, value);

 		snprintf(header, sizeof(header), "base-frequency(MHz)");
 		if (!ctdp_level->sse_p1)
 			ctdp_level->sse_p1 = ctdp_level->tdp_ratio;
 		snprintf(value, sizeof(value), "%d",
 			  ctdp_level->sse_p1 * DISP_FREQ_MULTIPLIER);
-		format_and_print(outf, base_level + 4, header, value);
+		format_and_print(outf, level + 2, header, value);

 		if (ctdp_level->avx2_p1) {
 			snprintf(header, sizeof(header), "base-frequency-avx2(MHz)");
 			snprintf(value, sizeof(value), "%d",
 				 ctdp_level->avx2_p1 * DISP_FREQ_MULTIPLIER);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);
 		}

 		if (ctdp_level->avx512_p1) {
 			snprintf(header, sizeof(header), "base-frequency-avx512(MHz)");
 			snprintf(value, sizeof(value), "%d",
 				 ctdp_level->avx512_p1 * DISP_FREQ_MULTIPLIER);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);
 		}

 		if (ctdp_level->uncore_p1) {
 			snprintf(header, sizeof(header), "uncore-frequency-min(MHz)");
 			snprintf(value, sizeof(value), "%d",
 				 ctdp_level->uncore_p1 * DISP_FREQ_MULTIPLIER);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);
 		}

 		if (ctdp_level->uncore_p0) {
 			snprintf(header, sizeof(header), "uncore-frequency-max(MHz)");
 			snprintf(value, sizeof(value), "%d",
 				 ctdp_level->uncore_p0 * DISP_FREQ_MULTIPLIER);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);
 		}

 		if (ctdp_level->mem_freq) {
 			snprintf(header, sizeof(header), "mem-frequency(MHz)");
 			snprintf(value, sizeof(value), "%d",
 				 ctdp_level->mem_freq * DISP_FREQ_MULTIPLIER);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);
 		}

 		snprintf(header, sizeof(header),
@ -405,7 +441,7 @@ void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level,
 				snprintf(value, sizeof(value), "disabled");
 		} else
 			snprintf(value, sizeof(value), "unsupported");
-		format_and_print(outf, base_level + 4, header, value);
+		format_and_print(outf, level + 2, header, value);

 		snprintf(header, sizeof(header),
 			 "speed-select-base-freq");
@ -416,7 +452,7 @@ void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level,
 				snprintf(value, sizeof(value), "disabled");
 		} else
 			snprintf(value, sizeof(value), "unsupported");
-		format_and_print(outf, base_level + 4, header, value);
+		format_and_print(outf, level + 2, header, value);

 		snprintf(header, sizeof(header),
 			 "speed-select-core-power");
@ -427,110 +463,115 @@ void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level,
 				snprintf(value, sizeof(value), "disabled");
 		} else
 			snprintf(value, sizeof(value), "unsupported");
-		format_and_print(outf, base_level + 4, header, value);
+		format_and_print(outf, level + 2, header, value);

 		if (is_clx_n_platform()) {
 			if (ctdp_level->pbf_support)
 				_isst_pbf_display_information(cpu, outf,
 							      tdp_level,
 							  &ctdp_level->pbf_info,
-							      base_level + 4);
+							      level + 1);
 			continue;
 		}

 		if (ctdp_level->pkg_tdp) {
 			snprintf(header, sizeof(header), "thermal-design-power(W)");
 			snprintf(value, sizeof(value), "%d", ctdp_level->pkg_tdp);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);
 		}

 		if (ctdp_level->t_proc_hot) {
 			snprintf(header, sizeof(header), "tjunction-max(C)");
 			snprintf(value, sizeof(value), "%d", ctdp_level->t_proc_hot);
-			format_and_print(outf, base_level + 4, header, value);
+			format_and_print(outf, level + 2, header, value);
 		}

 		snprintf(header, sizeof(header), "turbo-ratio-limits-sse");
-		format_and_print(outf, base_level + 4, header, NULL);
+		format_and_print(outf, level + 2, header, NULL);
 		for (j = 0; j < 8; ++j) {
 			snprintf(header, sizeof(header), "bucket-%d", j);
-			format_and_print(outf, base_level + 5, header, NULL);
+			format_and_print(outf, level + 3, header, NULL);

 			snprintf(header, sizeof(header), "core-count");
 			snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff);
-			format_and_print(outf, base_level + 6, header, value);
+			format_and_print(outf, level + 4, header, value);

 			snprintf(header, sizeof(header),
 				"max-turbo-frequency(MHz)");
 			snprintf(value, sizeof(value), "%d",
 				 ctdp_level->trl_sse_active_cores[j] *
 				  DISP_FREQ_MULTIPLIER);
-			format_and_print(outf, base_level + 6, header, value);
+			format_and_print(outf, level + 4, header, value);
 		}

 		if (ctdp_level->trl_avx_active_cores[0]) {
 			snprintf(header, sizeof(header), "turbo-ratio-limits-avx2");
-			format_and_print(outf, base_level + 4, header, NULL);
+			format_and_print(outf, level + 2, header, NULL);
 			for (j = 0; j < 8; ++j) {
 				snprintf(header, sizeof(header), "bucket-%d", j);
-				format_and_print(outf, base_level + 5, header, NULL);
+				format_and_print(outf, level + 3, header, NULL);

 				snprintf(header, sizeof(header), "core-count");
 				snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff);
-				format_and_print(outf, base_level + 6, header, value);
+				format_and_print(outf, level + 4, header, value);

 				snprintf(header, sizeof(header), "max-turbo-frequency(MHz)");
 				snprintf(value, sizeof(value), "%d", ctdp_level->trl_avx_active_cores[j] * DISP_FREQ_MULTIPLIER);
-				format_and_print(outf, base_level + 6, header, value);
+				format_and_print(outf, level + 4, header, value);
 			}
 		}

 		if (ctdp_level->trl_avx_512_active_cores[0]) {
 			snprintf(header, sizeof(header), "turbo-ratio-limits-avx512");
-			format_and_print(outf, base_level + 4, header, NULL);
+			format_and_print(outf, level + 2, header, NULL);
 			for (j = 0; j < 8; ++j) {
 				snprintf(header, sizeof(header), "bucket-%d", j);
-				format_and_print(outf, base_level + 5, header, NULL);
+				format_and_print(outf, level + 3, header, NULL);

 				snprintf(header, sizeof(header), "core-count");
 				snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff);
-				format_and_print(outf, base_level + 6, header, value);
+				format_and_print(outf, level + 4, header, value);

 				snprintf(header, sizeof(header), "max-turbo-frequency(MHz)");
 				snprintf(value, sizeof(value), "%d", ctdp_level->trl_avx_512_active_cores[j] * DISP_FREQ_MULTIPLIER);
-			format_and_print(outf, base_level + 6, header, value);
+				format_and_print(outf, level + 4, header, value);
 			}
 		}

 		if (ctdp_level->pbf_support)
 			_isst_pbf_display_information(cpu, outf, i,
 						      &ctdp_level->pbf_info,
-						      base_level + 4);
+						      level + 2);
 		if (ctdp_level->fact_support)
 			_isst_fact_display_information(cpu, outf, i, 0xff, 0xff,
 						       &ctdp_level->fact_info,
-						       base_level + 4);
+						       level + 2);
 	}

 	format_and_print(outf, 1, NULL, NULL);
 }

+static int start;
 void isst_ctdp_display_information_start(FILE *outf)
 {
 	last_level = 0;
 	format_and_print(outf, 0, "start", NULL);
+	start = 1;
 }

 void isst_ctdp_display_information_end(FILE *outf)
 {
 	format_and_print(outf, 0, NULL, NULL);
+	start = 0;
 }

 void isst_pbf_display_information(int cpu, FILE *outf, int level,
 				  struct isst_pbf_info *pbf_info)
 {
-	print_package_info(cpu, outf);
-	_isst_pbf_display_information(cpu, outf, level, pbf_info, 4);
+	int _level;
+
+	_level = print_package_info(cpu, outf);
+	_isst_pbf_display_information(cpu, outf, level, pbf_info, _level + 1);
 	format_and_print(outf, 1, NULL, NULL);
 }

@ -538,9 +579,11 @@ void isst_fact_display_information(int cpu, FILE *outf, int level,
 				   int fact_bucket, int fact_avx,
 				   struct isst_fact_info *fact_info)
 {
-	print_package_info(cpu, outf);
+	int _level;
+
+	_level = print_package_info(cpu, outf);
 	_isst_fact_display_information(cpu, outf, level, fact_bucket, fact_avx,
-				       fact_info, 4);
+				       fact_info, _level + 1);
 	format_and_print(outf, 1, NULL, NULL);
 }

@ -549,94 +592,103 @@ void isst_clos_display_information(int cpu, FILE *outf, int clos,
 {
 	char header[256];
 	char value[256];
+	int level;

-	snprintf(header, sizeof(header), "package-%d",
-		 get_physical_package_id(cpu));
-	format_and_print(outf, 1, header, NULL);
-	snprintf(header, sizeof(header), "die-%d", get_physical_die_id(cpu));
-	format_and_print(outf, 2, header, NULL);
-	snprintf(header, sizeof(header), "cpu-%d", cpu);
-	format_and_print(outf, 3, header, NULL);
+	level = print_package_info(cpu, outf);

 	snprintf(header, sizeof(header), "core-power");
-	format_and_print(outf, 4, header, NULL);
+	format_and_print(outf, level + 1, header, NULL);

 	snprintf(header, sizeof(header), "clos");
 	snprintf(value, sizeof(value), "%d", clos);
-	format_and_print(outf, 5, header, value);
+	format_and_print(outf, level + 2, header, value);

 	snprintf(header, sizeof(header), "epp");
 	snprintf(value, sizeof(value), "%d", clos_config->epp);
-	format_and_print(outf, 5, header, value);
+	format_and_print(outf, level + 2, header, value);

 	snprintf(header, sizeof(header), "clos-proportional-priority");
 	snprintf(value, sizeof(value), "%d", clos_config->clos_prop_prio);
-	format_and_print(outf, 5, header, value);
+	format_and_print(outf, level + 2, header, value);

 	snprintf(header, sizeof(header), "clos-min");
 	snprintf(value, sizeof(value), "%d MHz", clos_config->clos_min * DISP_FREQ_MULTIPLIER);
-	format_and_print(outf, 5, header, value);
+	format_and_print(outf, level + 2, header, value);

 	snprintf(header, sizeof(header), "clos-max");
-	snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * DISP_FREQ_MULTIPLIER);
-	format_and_print(outf, 5, header, value);
+	if (clos_config->clos_max == 0xff)
+		snprintf(value, sizeof(value), "Max Turbo frequency");
+	else
+		snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * DISP_FREQ_MULTIPLIER);
+	format_and_print(outf, level + 2, header, value);

 	snprintf(header, sizeof(header), "clos-desired");
 	snprintf(value, sizeof(value), "%d MHz", clos_config->clos_desired * DISP_FREQ_MULTIPLIER);
-	format_and_print(outf, 5, header, value);
+	format_and_print(outf, level + 2, header, value);

-	format_and_print(outf, 1, NULL, NULL);
+	format_and_print(outf, level, NULL, NULL);
 }

 void isst_clos_display_clos_information(int cpu, FILE *outf,
-					int clos_enable, int type)
+					int clos_enable, int type,
+					int state, int cap)
 {
 	char header[256];
 	char value[256];
+	int level;

-	snprintf(header, sizeof(header), "package-%d",
-		 get_physical_package_id(cpu));
-	format_and_print(outf, 1, header, NULL);
-	snprintf(header, sizeof(header), "die-%d", get_physical_die_id(cpu));
-	format_and_print(outf, 2, header, NULL);
-	snprintf(header, sizeof(header), "cpu-%d", cpu);
-	format_and_print(outf, 3, header, NULL);
+	level = print_package_info(cpu, outf);

 	snprintf(header, sizeof(header), "core-power");
-	format_and_print(outf, 4, header, NULL);
+	format_and_print(outf, level + 1, header, NULL);
+
+	snprintf(header, sizeof(header), "support-status");
+	if (cap)
+		snprintf(value, sizeof(value), "supported");
+	else
+		snprintf(value, sizeof(value), "unsupported");
+	format_and_print(outf, level + 2, header, value);

 	snprintf(header, sizeof(header), "enable-status");
-	snprintf(value, sizeof(value), "%d", clos_enable);
-	format_and_print(outf, 5, header, value);
+	if (state)
+		snprintf(value, sizeof(value), "enabled");
+	else
+		snprintf(value, sizeof(value), "disabled");
+	format_and_print(outf, level + 2, header, value);
+
+	snprintf(header, sizeof(header), "clos-enable-status");
+	if (clos_enable)
+		snprintf(value, sizeof(value), "enabled");
+	else
+		snprintf(value, sizeof(value), "disabled");
+	format_and_print(outf, level + 2, header, value);

 	snprintf(header, sizeof(header), "priority-type");
-	snprintf(value, sizeof(value), "%d", type);
-	format_and_print(outf, 5, header, value);
+	if (type)
+		snprintf(value, sizeof(value), "ordered");
+	else
+		snprintf(value, sizeof(value), "proportional");
+	format_and_print(outf, level + 2, header, value);

-	format_and_print(outf, 1, NULL, NULL);
+	format_and_print(outf, level, NULL, NULL);
 }

 void isst_clos_display_assoc_information(int cpu, FILE *outf, int clos)
 {
 	char header[256];
 	char value[256];
+	int level;

-	snprintf(header, sizeof(header), "package-%d",
-		 get_physical_package_id(cpu));
-	format_and_print(outf, 1, header, NULL);
-	snprintf(header, sizeof(header), "die-%d", get_physical_die_id(cpu));
-	format_and_print(outf, 2, header, NULL);
-	snprintf(header, sizeof(header), "cpu-%d", cpu);
-	format_and_print(outf, 3, header, NULL);
+	level = print_package_info(cpu, outf);

 	snprintf(header, sizeof(header), "get-assoc");
-	format_and_print(outf, 4, header, NULL);
+	format_and_print(outf, level + 1, header, NULL);

 	snprintf(header, sizeof(header), "clos");
 	snprintf(value, sizeof(value), "%d", clos);
-	format_and_print(outf, 5, header, value);
+	format_and_print(outf, level + 2, header, value);

-	format_and_print(outf, 1, NULL, NULL);
+	format_and_print(outf, level, NULL, NULL);
 }

 void isst_display_result(int cpu, FILE *outf, char *feature, char *cmd,
@ -644,24 +696,60 @@ void isst_display_result(int cpu, FILE *outf, char *feature, char *cmd,
 {
 	char header[256];
 	char value[256];
+	int level = 3;
+
+	if (cpu >= 0)
+		level = print_package_info(cpu, outf);

-	if (cpu >= 0) {
-		snprintf(header, sizeof(header), "package-%d",
-			 get_physical_package_id(cpu));
-		format_and_print(outf, 1, header, NULL);
-		snprintf(header, sizeof(header), "die-%d", get_physical_die_id(cpu));
-		format_and_print(outf, 2, header, NULL);
-		snprintf(header, sizeof(header), "cpu-%d", cpu);
-		format_and_print(outf, 3, header, NULL);
-	}
 	snprintf(header, sizeof(header), "%s", feature);
-	format_and_print(outf, 4, header, NULL);
+	format_and_print(outf, level + 1, header, NULL);
 	snprintf(header, sizeof(header), "%s", cmd);
 	if (!result)
 		snprintf(value, sizeof(value), "success");
 	else
 		snprintf(value, sizeof(value), "failed(error %d)", result);
-	format_and_print(outf, 5, header, value);
+	format_and_print(outf, level + 2, header, value);

-	format_and_print(outf, 1, NULL, NULL);
+	format_and_print(outf, level, NULL, NULL);
+}
+
+void isst_display_error_info_message(int error, char *msg, int arg_valid, int arg)
+{
+	FILE *outf = get_output_file();
+	static int error_index;
+	char header[256];
+	char value[256];
+
+	if (!out_format_is_json()) {
+		if (arg_valid)
+			snprintf(value, sizeof(value), "%s %d", msg, arg);
+		else
+			snprintf(value, sizeof(value), "%s", msg);
+
+		if (error)
+			fprintf(outf, "Error: %s\n", value);
+		else
+			fprintf(outf, "Information: %s\n", value);
+		return;
+	}
+
+	if (!start)
+		format_and_print(outf, 0, "start", NULL);
+
+	if (error)
+		snprintf(header, sizeof(header), "Error%d", error_index++);
+	else
+		snprintf(header, sizeof(header), "Information:%d", error_index++);
+	format_and_print(outf, 1, header, NULL);
+
+	snprintf(header, sizeof(header), "message");
+	if (arg_valid)
+		snprintf(value, sizeof(value), "%s %d", msg, arg);
+	else
+		snprintf(value, sizeof(value), "%s", msg);
+
+	format_and_print(outf, 2, header, value);
+	format_and_print(outf, 1, NULL, NULL);
+	if (!start)
+		format_and_print(outf, 0, NULL, NULL);
 }
--- a/tools/power/x86/intel-speed-select/isst.h
+++ b/tools/power/x86/intel-speed-select/isst.h
@ -172,6 +172,7 @@ extern int get_cpu_count(int pkg_id, int die_id);
 extern int get_core_count(int pkg_id, int die_id);

 /* Common interfaces */
+FILE *get_output_file(void);
 extern void debug_printf(const char *format, ...);
 extern int out_format_is_json(void);
 extern int get_physical_package_id(int cpu);
@ -196,6 +197,8 @@ extern int isst_send_msr_command(unsigned int cpu, unsigned int command,
 				 int write, unsigned long long *req_resp);

 extern int isst_get_ctdp_levels(int cpu, struct isst_pkg_ctdp *pkg_dev);
+extern int isst_get_ctdp_control(int cpu, int config_index,
+				 struct isst_pkg_ctdp_level_info *ctdp_level);
 extern int isst_get_coremask_info(int cpu, int config_index,
 			   struct isst_pkg_ctdp_level_info *ctdp_level);
 extern int isst_get_process_ctdp(int cpu, int tdp_level,
@ -205,7 +208,7 @@ extern void isst_get_process_ctdp_complete(int cpu,
 extern void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level,
 					  struct isst_pkg_ctdp *pkg_dev);
 extern void isst_ctdp_display_core_info(int cpu, FILE *outf, char *prefix,
-					unsigned int val);
+					unsigned int val, char *str0, char *str1);
 extern void isst_ctdp_display_information_start(FILE *outf);
 extern void isst_ctdp_display_information_end(FILE *outf);
 extern void isst_pbf_display_information(int cpu, FILE *outf, int level,
@ -216,7 +219,7 @@ extern int isst_set_pbf_fact_status(int cpu, int pbf, int enable);
 extern int isst_get_pbf_info(int cpu, int level,
 			     struct isst_pbf_info *pbf_info);
 extern void isst_get_pbf_info_complete(struct isst_pbf_info *pbf_info);
-extern int isst_get_fact_info(int cpu, int level,
+extern int isst_get_fact_info(int cpu, int level, int fact_bucket,
 			      struct isst_fact_info *fact_info);
 extern int isst_get_fact_bucket_info(int cpu, int level,
 				     struct isst_fact_bucket_info *bucket_info);
@ -245,7 +248,10 @@ extern void isst_display_result(int cpu, FILE *outf, char *feature, char *cmd,

 extern int isst_clos_get_clos_information(int cpu, int *enable, int *type);
 extern void isst_clos_display_clos_information(int cpu, FILE *outf,
-					       int clos_enable, int type);
+					       int clos_enable, int type,
+					       int state, int cap);
 extern int is_clx_n_platform(void);
 extern int get_cpufreq_base_freq(int cpu);
+extern int isst_read_pm_config(int cpu, int *cp_state, int *cp_cap);
+extern void isst_display_error_info_message(int error, char *msg, int arg_valid, int arg);
 #endif