microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

omap: Separate out omap2 FS USB platform init functions 

We want to split old FS USB platform init code and stop doing pin multiplexing
under plat-omap. First move 24xx specific init code into omap2_usb[012]_init
functions.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2010-07-05 16:31:28 +03:00
Родитель f40fd0e215
Коммит dba638d22d
1 изменённых файлов: 158 добавлений и 96 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

254
arch/arm/plat-omap/usb.c
Просмотреть файл

@ -115,15 +115,56 @@ static void omap2_usb2_enable_5pinunitll(void)
omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
}
static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
{
u32 syscon1 = 0;
omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
if (nwires == 0)
return 0;
if (is_device)
omap_cfg_reg(J20_24XX_USB0_PUEN);
omap_cfg_reg(K18_24XX_USB0_DAT);
omap_cfg_reg(K19_24XX_USB0_TXEN);
omap_cfg_reg(J14_24XX_USB0_SE0);
if (nwires != 3)
omap_cfg_reg(J18_24XX_USB0_RCV);
switch (nwires) {
case 3:
syscon1 = 2;
omap2_usb_devconf_set(0, USB_BIDIR);
break;
case 4:
syscon1 = 1;
omap2_usb_devconf_set(0, USB_BIDIR);
break;
case 6:
syscon1 = 3;
omap_cfg_reg(J19_24XX_USB0_VP);
omap_cfg_reg(K20_24XX_USB0_VM);
omap2_usb_devconf_set(0, USB_UNIDIR);
break;
default:
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
0, nwires);
}
return syscon1 << 16;
}
static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
{
u32 syscon1 = 0;
if (cpu_is_omap24xx())
omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
return omap2_usb0_init(nwires, is_device);
if (nwires == 0) {
if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
if (!cpu_is_omap15xx()) {
u32 l;
/* pulldown D+/D- */
@ -135,9 +176,7 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
}
if (is_device) {
if (cpu_is_omap24xx())
omap_cfg_reg(J20_24XX_USB0_PUEN);
else if (cpu_is_omap7xx()) {
if (cpu_is_omap7xx()) {
omap_cfg_reg(AA17_7XX_USB_DM);
omap_cfg_reg(W16_7XX_USB_PU_EN);
omap_cfg_reg(W17_7XX_USB_VBUSI);
@ -147,8 +186,7 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
omap_cfg_reg(W4_USB_PUEN);
}
/* internal transceiver (unavailable on 17xx, 24xx) */
if (!cpu_class_is_omap2() && nwires == 2) {
if (nwires == 2) {
u32 l;
// omap_cfg_reg(P9_USB_DP);
@ -183,26 +221,18 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
return 0;
}
if (cpu_is_omap24xx()) {
omap_cfg_reg(K18_24XX_USB0_DAT);
omap_cfg_reg(K19_24XX_USB0_TXEN);
omap_cfg_reg(J14_24XX_USB0_SE0);
if (nwires != 3)
omap_cfg_reg(J18_24XX_USB0_RCV);
} else {
omap_cfg_reg(V6_USB0_TXD);
omap_cfg_reg(W9_USB0_TXEN);
omap_cfg_reg(W5_USB0_SE0);
if (nwires != 3)
omap_cfg_reg(Y5_USB0_RCV);
}
omap_cfg_reg(V6_USB0_TXD);
omap_cfg_reg(W9_USB0_TXEN);
omap_cfg_reg(W5_USB0_SE0);
if (nwires != 3)
omap_cfg_reg(Y5_USB0_RCV);
/* NOTE: SPEED and SUSP aren't configured here. OTG hosts
* may be able to use I2C requests to set those bits along
* with VBUS switching and overcurrent detection.
*/
if (cpu_class_is_omap1() && nwires != 6) {
if (nwires != 6) {
u32 l;
l = omap_readl(USB_TRANSCEIVER_CTRL);
@ -213,21 +243,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
switch (nwires) {
case 3:
syscon1 = 2;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(0, USB_BIDIR);
break;
case 4:
syscon1 = 1;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(0, USB_BIDIR);
break;
case 6:
syscon1 = 3;
if (cpu_is_omap24xx()) {
omap_cfg_reg(J19_24XX_USB0_VP);
omap_cfg_reg(K20_24XX_USB0_VM);
omap2_usb_devconf_set(0, USB_UNIDIR);
} else {
{
u32 l;
omap_cfg_reg(AA9_USB0_VP);
@ -244,30 +266,66 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
return syscon1 << 16;
}
static u32 __init omap2_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
if (nwires == 0)
return 0;
/* NOTE: board-specific code must set up pin muxing for usb1,
* since each signal could come out on either of two balls.
*/
switch (nwires) {
case 2:
/* NOTE: board-specific code must override this setting if
* this TLL link is not using DP/DM
*/
syscon1 = 1;
omap2_usb_devconf_set(1, USB_BIDIR_TLL);
break;
case 3:
syscon1 = 2;
omap2_usb_devconf_set(1, USB_BIDIR);
break;
case 4:
syscon1 = 1;
omap2_usb_devconf_set(1, USB_BIDIR);
break;
case 6:
default:
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
1, nwires);
}
return syscon1 << 20;
}
static u32 __init omap_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
if (cpu_is_omap24xx())
return omap2_usb1_init(nwires);
if (!cpu_is_omap15xx() && nwires != 6) {
u32 l;
l = omap_readl(USB_TRANSCEIVER_CTRL);
l &= ~CONF_USB1_UNI_R;
omap_writel(l, USB_TRANSCEIVER_CTRL);
}
if (cpu_is_omap24xx())
omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
if (nwires == 0)
return 0;
/* external transceiver */
if (cpu_class_is_omap1()) {
omap_cfg_reg(USB1_TXD);
omap_cfg_reg(USB1_TXEN);
if (nwires != 3)
omap_cfg_reg(USB1_RCV);
}
omap_cfg_reg(USB1_TXD);
omap_cfg_reg(USB1_TXEN);
if (nwires != 3)
omap_cfg_reg(USB1_RCV);
if (cpu_is_omap15xx()) {
omap_cfg_reg(USB1_SEO);
@ -280,10 +338,6 @@ static u32 __init omap_usb1_init(unsigned nwires)
} else if (cpu_is_omap1710()) {
omap_cfg_reg(R13_1710_USB1_SE0);
// SUSP
} else if (cpu_is_omap24xx()) {
/* NOTE: board-specific code must set up pin muxing for usb1,
* since each signal could come out on either of two balls.
*/
} else {
pr_debug("usb%d cpu unrecognized\n", 1);
return 0;
@ -291,27 +345,14 @@ static u32 __init omap_usb1_init(unsigned nwires)
switch (nwires) {
case 2:
if (!cpu_is_omap24xx())
goto bad;
/* NOTE: board-specific code must override this setting if
* this TLL link is not using DP/DM
*/
syscon1 = 1;
omap2_usb_devconf_set(1, USB_BIDIR_TLL);
break;
goto bad;
case 3:
syscon1 = 2;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(1, USB_BIDIR);
break;
case 4:
syscon1 = 1;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(1, USB_BIDIR);
break;
case 6:
if (cpu_is_omap24xx())
goto bad;
syscon1 = 3;
omap_cfg_reg(USB1_VP);
omap_cfg_reg(USB1_VM);
@ -331,20 +372,70 @@ bad:
return syscon1 << 20;
}
static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
{
u32 syscon1 = 0;
if (cpu_is_omap24xx()) {
omap2_usb2_disable_5pinbitll();
alt_pingroup = 0;
}
omap2_usb2_disable_5pinbitll();
alt_pingroup = 0;
/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
if (alt_pingroup || nwires == 0)
return 0;
if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
omap_cfg_reg(Y11_24XX_USB2_DAT);
omap_cfg_reg(AA10_24XX_USB2_SE0);
if (nwires > 2)
omap_cfg_reg(AA12_24XX_USB2_TXEN);
if (nwires > 3)
omap_cfg_reg(AA6_24XX_USB2_RCV);
switch (nwires) {
case 2:
/* NOTE: board-specific code must override this setting if
* this TLL link is not using DP/DM
*/
syscon1 = 1;
omap2_usb_devconf_set(2, USB_BIDIR_TLL);
break;
case 3:
syscon1 = 2;
omap2_usb_devconf_set(2, USB_BIDIR);
break;
case 4:
syscon1 = 1;
omap2_usb_devconf_set(2, USB_BIDIR);
break;
case 5:
omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
/* NOTE: board-specific code must override this setting if
* this TLL link is not using DP/DM. Something must also
* set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
*/
syscon1 = 3;
omap2_usb2_enable_5pinunitll();
break;
case 6:
default:
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
2, nwires);
}
return syscon1 << 24;
}
static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
{
u32 syscon1 = 0;
if (cpu_is_omap24xx())
return omap2_usb2_init(nwires, alt_pingroup);
/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
if (alt_pingroup || nwires == 0)
return 0;
if (!cpu_is_omap15xx() && nwires != 6) {
u32 l;
l = omap_readl(USB_TRANSCEIVER_CTRL);
@ -367,53 +458,24 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
if (nwires != 3)
omap_cfg_reg(Y5_USB2_RCV);
// FIXME omap_cfg_reg(USB2_SPEED);
} else if (cpu_is_omap24xx()) {
omap_cfg_reg(Y11_24XX_USB2_DAT);
omap_cfg_reg(AA10_24XX_USB2_SE0);
if (nwires > 2)
omap_cfg_reg(AA12_24XX_USB2_TXEN);
if (nwires > 3)
omap_cfg_reg(AA6_24XX_USB2_RCV);
} else {
pr_debug("usb%d cpu unrecognized\n", 1);
return 0;
}
// if (cpu_class_is_omap1()) omap_cfg_reg(USB2_SUSP);
// omap_cfg_reg(USB2_SUSP);
switch (nwires) {
case 2:
if (!cpu_is_omap24xx())
goto bad;
/* NOTE: board-specific code must override this setting if
* this TLL link is not using DP/DM
*/
syscon1 = 1;
omap2_usb_devconf_set(2, USB_BIDIR_TLL);
break;
goto bad;
case 3:
syscon1 = 2;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(2, USB_BIDIR);
break;
case 4:
syscon1 = 1;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(2, USB_BIDIR);
break;
case 5:
if (!cpu_is_omap24xx())
goto bad;
omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
/* NOTE: board-specific code must override this setting if
* this TLL link is not using DP/DM. Something must also
* set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
*/
syscon1 = 3;
omap2_usb2_enable_5pinunitll();
break;
goto bad;
case 6:
if (cpu_is_omap24xx())
goto bad;
syscon1 = 3;
if (cpu_is_omap15xx()) {
omap_cfg_reg(USB2_VP);