microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: dts: sun6i: Sort pinmux setting nodes 

The pinmux setting nodes for the A31 were added out of alphabetical
order. Sort them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This commit is contained in:
Chen-Yu Tsai 2016-10-07 00:06:26 +08:00 коммит произвёл Maxime Ripard
Родитель e5cd7ff705
Коммит dc0aea386a
1 изменённых файлов: 41 добавлений и 41 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

82
arch/arm/boot/dts/sun6i-a31.dtsi
Просмотреть файл

@ -434,13 +434,48 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "uart0";
gmac_pins_gmii_a: gmac_gmii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
"PA8", "PA9", "PA10", "PA11",
"PA12", "PA13", "PA14", "PA15",
"PA16", "PA17", "PA18", "PA19",
"PA20", "PA21", "PA22", "PA23",
"PA24", "PA25", "PA26", "PA27";
allwinner,function = "gmac";
/*
* data lines in GMII mode run at 125MHz and
* might need a higher signal drive strength
*/
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
"PA12", "PA13", "PA14", "PA19",
"PA20", "PA21", "PA22", "PA23",
"PA24", "PA26", "PA27";
allwinner,function = "gmac";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA9", "PA10", "PA11",
"PA12", "PA13", "PA14", "PA19",
"PA20", "PA25", "PA26", "PA27";
allwinner,function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH14", "PH15";
allwinner,function = "i2c0";
@ -506,47 +541,12 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
"PA12", "PA13", "PA14", "PA19",
"PA20", "PA21", "PA22", "PA23",
"PA24", "PA26", "PA27";
allwinner,function = "gmac";
uart0_pins_a: uart0@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_gmii_a: gmac_gmii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
"PA8", "PA9", "PA10", "PA11",
"PA12", "PA13", "PA14", "PA15",
"PA16", "PA17", "PA18", "PA19",
"PA20", "PA21", "PA22", "PA23",
"PA24", "PA25", "PA26", "PA27";
allwinner,function = "gmac";
/*
* data lines in GMII mode run at 125MHz and
* might need a higher signal drive strength
*/
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA9", "PA10", "PA11",
"PA12", "PA13", "PA14", "PA19",
"PA20", "PA25", "PA26", "PA27";
allwinner,function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {