microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge 5.19-rc7 into usb-next 

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2022-07-18 22:41:42 +02:00
Родитель c76d09da77 ff6992735a
Коммит dc14036fb3
811 изменённых файлов: 9527 добавлений и 4570 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

3
.mailmap
Просмотреть файл

@ -64,6 +64,9 @@ Bart Van Assche <bvanassche@acm.org> <bart.vanassche@sandisk.com>
Bart Van Assche <bvanassche@acm.org> <bart.vanassche@wdc.com>
Ben Gardner <bgardner@wabtec.com>
Ben M Cahill <ben.m.cahill@intel.com>
Ben Widawsky <bwidawsk@kernel.org> <ben@bwidawsk.net>
Ben Widawsky <bwidawsk@kernel.org> <ben.widawsky@intel.com>
Ben Widawsky <bwidawsk@kernel.org> <benjamin.widawsky@intel.com>
Björn Steinbrink <B.Steinbrink@gmx.de>
Björn Töpel <bjorn@kernel.org> <bjorn.topel@gmail.com>
Björn Töpel <bjorn@kernel.org> <bjorn.topel@intel.com>

4
CREDITS
Просмотреть файл

@ -627,6 +627,10 @@ S: 48287 Sawleaf
S: Fremont, California 94539
S: USA
N: Tomas Cech
E: sleep_walker@suse.com
D: arm/palm treo support
N: Florent Chabaud
E: florent.chabaud@polytechnique.org
D: software suspend

25
Documentation/admin-guide/kernel-parameters.txt
Просмотреть файл

@ -5197,6 +5197,30 @@
retain_initrd [RAM] Keep initrd memory after extraction
retbleed= [X86] Control mitigation of RETBleed (Arbitrary
Speculative Code Execution with Return Instructions)
vulnerability.
off - no mitigation
auto - automatically select a migitation
auto,nosmt - automatically select a mitigation,
disabling SMT if necessary for
the full mitigation (only on Zen1
and older without STIBP).
ibpb - mitigate short speculation windows on
basic block boundaries too. Safe, highest
perf impact.
unret - force enable untrained return thunks,
only effective on AMD f15h-f17h
based systems.
unret,nosmt - like unret, will disable SMT when STIBP
is not available.
Selecting 'auto' will choose a mitigation method at run
time according to the CPU.
Not specifying this option is equivalent to retbleed=auto.
rfkill.default_state=
0 "airplane mode". All wifi, bluetooth, wimax, gps, fm,
etc. communication is blocked by default.
@ -5568,6 +5592,7 @@
eibrs - enhanced IBRS
eibrs,retpoline - enhanced IBRS + Retpolines
eibrs,lfence - enhanced IBRS + LFENCE
ibrs - use IBRS to protect kernel
Not specifying this option is equivalent to
spectre_v2=auto.

2
Documentation/core-api/kernel-api.rst
Просмотреть файл

@ -223,7 +223,7 @@ Module Loading
Inter Module support
--------------------
Refer to the file kernel/module.c for more information.
Refer to the files in kernel/module/ for more information.
Hardware Interfaces
===================

4
Documentation/core-api/symbol-namespaces.rst
Просмотреть файл

@ -51,8 +51,8 @@ namespace ``USB_STORAGE``, use::
The corresponding ksymtab entry struct ``kernel_symbol`` will have the member
``namespace`` set accordingly. A symbol that is exported without a namespace will
refer to ``NULL``. There is no default namespace if none is defined. ``modpost``
and kernel/module.c make use the namespace at build time or module load time,
respectively.
and kernel/module/main.c make use the namespace at build time or module load
time, respectively.
2.2 Using the DEFAULT_SYMBOL_NAMESPACE define
=============================================

1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
Просмотреть файл

@ -94,6 +94,7 @@ if:
- allwinner,sun8i-a83t-display-engine
- allwinner,sun8i-r40-display-engine
- allwinner,sun9i-a80-display-engine
- allwinner,sun20i-d1-display-engine
- allwinner,sun50i-a64-display-engine
then:

2
Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
Просмотреть файл

@ -67,7 +67,7 @@ if:
then:
properties:
clocks:
maxItems: 2
minItems: 2
required:
- clock-names

2
Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
Просмотреть файл

@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Atheros ath9k wireless devices Generic Binding
maintainers:
- Kalle Valo <kvalo@codeaurora.org>
- Toke Høiland-Jørgensen <toke@toke.dk>
description: |
This node provides properties for configuring the ath9k wireless device.

2
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
Просмотреть файл

@ -9,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies ath11k wireless devices Generic Binding
maintainers:
- Kalle Valo <kvalo@codeaurora.org>
- Kalle Valo <kvalo@kernel.org>
description: |
These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax

8
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
Просмотреть файл

@ -25,12 +25,12 @@ properties:
- qcom,sc7280-lpass-cpu
reg:
minItems: 2
minItems: 1
maxItems: 6
description: LPAIF core registers
reg-names:
minItems: 2
minItems: 1
maxItems: 6
clocks:
@ -42,12 +42,12 @@ properties:
maxItems: 10
interrupts:
minItems: 2
minItems: 1
maxItems: 4
description: LPAIF DMA buffer interrupt
interrupt-names:
minItems: 2
minItems: 1
maxItems: 4
qcom,adsp:

6
Documentation/driver-api/firmware/other_interfaces.rst
Просмотреть файл

@ -13,6 +13,12 @@ EDD Interfaces
.. kernel-doc:: drivers/firmware/edd.c
:internal:
Generic System Framebuffers Interface
-------------------------------------
.. kernel-doc:: drivers/firmware/sysfb.c
:export:
Intel Stratix10 SoC Service Layer
---------------------------------
Some features of the Intel Stratix10 SoC require a level of privilege

8
Documentation/filesystems/netfs_library.rst
Просмотреть файл

@ -301,7 +301,7 @@ through which it can issue requests and negotiate::
void (*issue_read)(struct netfs_io_subrequest *subreq);
bool (*is_still_valid)(struct netfs_io_request *rreq);
int (*check_write_begin)(struct file *file, loff_t pos, unsigned len,
struct folio *folio, void **_fsdata);
struct folio **foliop, void **_fsdata);
void (*done)(struct netfs_io_request *rreq);
};
@ -381,8 +381,10 @@ The operations are as follows:
allocated/grabbed the folio to be modified to allow the filesystem to flush
conflicting state before allowing it to be modified.
It should return 0 if everything is now fine, -EAGAIN if the folio should be
regrabbed and any other error code to abort the operation.
It may unlock and discard the folio it was given and set the caller's folio
pointer to NULL. It should return 0 if everything is now fine (``*foliop``
left set) or the op should be retried (``*foliop`` cleared) and any other
error code to abort the operation.
* ``done``

4
Documentation/filesystems/overlayfs.rst
Просмотреть файл

@ -466,6 +466,10 @@ overlay filesystem and the value of st_ino for filesystem objects may not be
persistent and could change even while the overlay filesystem is mounted, as
summarized in the `Inode properties`_ table above.
4) "idmapped mounts"
When the upper or lower layers are idmapped mounts overlayfs will be mounted
without support for POSIX Access Control Lists (ACLs). This limitation will
eventually be lifted.
Changes to underlying filesystems
---------------------------------

10
Documentation/livepatch/module-elf-format.rst
Просмотреть файл

@ -210,11 +210,11 @@ module->symtab.
=====================================
Normally, a stripped down copy of a module's symbol table (containing only
"core" symbols) is made available through module->symtab (See layout_symtab()
in kernel/module.c). For livepatch modules, the symbol table copied into memory
on module load must be exactly the same as the symbol table produced when the
patch module was compiled. This is because the relocations in each livepatch
relocation section refer to their respective symbols with their symbol indices,
and the original symbol indices (and thus the symtab ordering) must be
in kernel/module/kallsyms.c). For livepatch modules, the symbol table copied
into memory on module load must be exactly the same as the symbol table produced
when the patch module was compiled. This is because the relocations in each
livepatch relocation section refer to their respective symbols with their symbol
indices, and the original symbol indices (and thus the symtab ordering) must be
preserved in order for apply_relocate_add() to find the right symbol.
For example, take this particular rela from a livepatch module:::

4
Documentation/networking/ip-sysctl.rst
Просмотреть файл

@ -1085,7 +1085,7 @@ cipso_cache_enable - BOOLEAN
cipso_cache_bucket_size - INTEGER
The CIPSO label cache consists of a fixed size hash table with each
hash bucket containing a number of cache entries. This variable limits
the number of entries in each hash bucket; the larger the value the
the number of entries in each hash bucket; the larger the value is, the
more CIPSO label mappings that can be cached. When the number of
entries in a given hash bucket reaches this limit adding new entries
causes the oldest entry in the bucket to be removed to make room.
@ -1179,7 +1179,7 @@ ip_autobind_reuse - BOOLEAN
option should only be set by experts.
Default: 0
ip_dynaddr - BOOLEAN
ip_dynaddr - INTEGER
If set non-zero, enables support for dynamic addresses.
If set to a non-zero value larger than 1, a kernel log
message will be printed when dynamic address rewriting

36
Documentation/process/maintainer-netdev.rst
Просмотреть файл

@ -6,6 +6,15 @@
netdev FAQ
==========
tl;dr
-----
- designate your patch to a tree - ``[PATCH net]`` or ``[PATCH net-next]``
- for fixes the ``Fixes:`` tag is required, regardless of the tree
- don't post large series (> 15 patches), break them up
- don't repost your patches within one 24h period
- reverse xmas tree
What is netdev?
---------------
It is a mailing list for all network-related Linux stuff. This
@ -136,6 +145,20 @@ it to the maintainer to figure out what is the most recent and current
version that should be applied. If there is any doubt, the maintainer
will reply and ask what should be done.
How do I divide my work into patches?
-------------------------------------
Put yourself in the shoes of the reviewer. Each patch is read separately
and therefore should constitute a comprehensible step towards your stated
goal.
Avoid sending series longer than 15 patches. Larger series takes longer
to review as reviewers will defer looking at it until they find a large
chunk of time. A small series can be reviewed in a short time, so Maintainers
just do it. As a result, a sequence of smaller series gets merged quicker and
with better review coverage. Re-posting large series also increases the mailing
list traffic.
I made changes to only a few patches in a patch series should I resend only those changed?
------------------------------------------------------------------------------------------
No, please resend the entire patch series and make sure you do number your
@ -183,6 +206,19 @@ it is requested that you make it look like this::
* another line of text
*/
What is "reverse xmas tree"?
----------------------------
Netdev has a convention for ordering local variables in functions.
Order the variable declaration lines longest to shortest, e.g.::
struct scatterlist *sg;
struct sk_buff *skb;
int err, i;
If there are dependencies between the variables preventing the ordering
move the initialization out of line.
I am working in existing code which uses non-standard formatting. Which formatting should I use?
------------------------------------------------------------------------------------------------
Make your code follow the most recent guidelines, so that eventually all code

2
Documentation/sound/soc/dai.rst
Просмотреть файл

@ -10,7 +10,7 @@ AC97
====
AC97 is a five wire interface commonly found on many PC sound cards. It is
now also popular in many portable devices. This DAI has a reset line and time
now also popular in many portable devices. This DAI has a RESET line and time
multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines.
The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the
frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97

6
Documentation/translations/it_IT/core-api/symbol-namespaces.rst
Просмотреть файл

@ -50,9 +50,9 @@ Di conseguenza, nella tabella dei simboli del kernel ci sarà una voce
rappresentata dalla struttura ``kernel_symbol`` che avrà il campo
``namespace`` (spazio dei nomi) impostato. Un simbolo esportato senza uno spazio
dei nomi avrà questo campo impostato a ``NULL``. Non esiste uno spazio dei nomi
di base. Il programma ``modpost`` e il codice in kernel/module.c usano lo spazio
dei nomi, rispettivamente, durante la compilazione e durante il caricamento
di un modulo.
di base. Il programma ``modpost`` e il codice in kernel/module/main.c usano lo
spazio dei nomi, rispettivamente, durante la compilazione e durante il
caricamento di un modulo.
2.2 Usare il simbolo di preprocessore DEFAULT_SYMBOL_NAMESPACE
==============================================================

2
Documentation/translations/zh_CN/core-api/kernel-api.rst
Просмотреть файл

@ -224,7 +224,7 @@ kernel/kmod.c
模块接口支持
------------
更多信息请参考文件kernel/module.c。
更多信息请参阅kernel/module/目录下的文件。
硬件接口
========

2
Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
Просмотреть файл

@ -52,7 +52,7 @@
相应的 ksymtab 条目结构体 ``kernel_symbol`` 将有相应的成员 ``命名空间`` 集。
导出时未指明命名空间的符号将指向 ``NULL`` 。如果没有定义命名空间，则默认没有。
``modpost`` 和kernel/module.c分别在构建时或模块加载时使用名称空间。
``modpost`` 和kernel/module/main.c分别在构建时或模块加载时使用名称空间。
2.2 使用DEFAULT_SYMBOL_NAMESPACE定义
====================================

17
Documentation/virt/kvm/api.rst
Просмотреть файл

@ -5657,6 +5657,7 @@ by a string of size ``name_size``.
#define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT)
#define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT)
#define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT)
#define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT)
#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_CYCLES
#define KVM_STATS_BASE_SHIFT 8
@ -5702,14 +5703,13 @@ Bits 0-3 of ``flags`` encode the type:
by the ``hist_param`` field. The range of the Nth bucket (1 <= N < ``size``)
is [``hist_param``*(N-1), ``hist_param``*N), while the range of the last
bucket is [``hist_param``*(``size``-1), +INF). (+INF means positive infinity
value.) The bucket value indicates how many samples fell in the bucket's range.
value.)
* ``KVM_STATS_TYPE_LOG_HIST``
The statistic is reported as a logarithmic histogram. The number of
buckets is specified by the ``size`` field. The range of the first bucket is
[0, 1), while the range of the last bucket is [pow(2, ``size``-2), +INF).
Otherwise, The Nth bucket (1 < N < ``size``) covers
[pow(2, N-2), pow(2, N-1)). The bucket value indicates how many samples fell
in the bucket's range.
[pow(2, N-2), pow(2, N-1)).
Bits 4-7 of ``flags`` encode the unit:
@ -5724,6 +5724,15 @@ Bits 4-7 of ``flags`` encode the unit:
It indicates that the statistics data is used to measure time or latency.
* ``KVM_STATS_UNIT_CYCLES``
It indicates that the statistics data is used to measure CPU clock cycles.
* ``KVM_STATS_UNIT_BOOLEAN``
It indicates that the statistic will always be either 0 or 1. Boolean
statistics of "peak" type will never go back from 1 to 0. Boolean
statistics can be linear histograms (with two buckets) but not logarithmic
histograms.
Note that, in the case of histograms, the unit applies to the bucket
ranges, while the bucket value indicates how many samples fell in the
bucket's range.
Bits 8-11 of ``flags``, together with ``exponent``, encode the scale of the
unit:
@ -5746,7 +5755,7 @@ the corresponding statistics data.
The ``bucket_size`` field is used as a parameter for histogram statistics data.
It is only used by linear histogram statistics data, specifying the size of a
bucket.
bucket in the unit expressed by bits 4-11 of ``flags`` together with ``exponent``.
The ``name`` field is the name string of the statistics data. The name string
starts at the end of ``struct kvm_stats_desc``. The maximum length including

160
MAINTAINERS
Просмотреть файл

@ -426,7 +426,6 @@ F: drivers/acpi/*thermal*
ACPI VIOT DRIVER
M: Jean-Philippe Brucker <jean-philippe@linaro.org>
L: linux-acpi@vger.kernel.org
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Maintained
F: drivers/acpi/viot.c
@ -960,7 +959,6 @@ F: drivers/video/fbdev/geode/
AMD IOMMU (AMD-VI)
M: Joerg Roedel <joro@8bytes.org>
R: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
@ -1040,6 +1038,7 @@ F: arch/arm64/boot/dts/amd/
AMD XGBE DRIVER
M: Tom Lendacky <thomas.lendacky@amd.com>
M: "Shyam Sundar S K" <Shyam-sundar.S-k@amd.com>
L: netdev@vger.kernel.org
S: Supported
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
@ -2499,10 +2498,8 @@ F: drivers/power/reset/oxnas-restart.c
N: oxnas
ARM/PALM TREO SUPPORT
M: Tomas Cech <sleep_walker@suse.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
W: http://hackndev.com
S: Orphan
F: arch/arm/mach-pxa/palmtreo.*
ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
@ -2540,6 +2537,7 @@ W: http://www.armlinux.org.uk/
ARM/QUALCOMM SUPPORT
M: Andy Gross <agross@kernel.org>
M: Bjorn Andersson <bjorn.andersson@linaro.org>
R: Konrad Dybcio <konrad.dybcio@somainline.org>
L: linux-arm-msm@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git
@ -3624,16 +3622,18 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
F: drivers/iio/accel/bma400*
BPF (Safe dynamic programs and tools)
BPF [GENERAL] (Safe Dynamic Programs and Tools)
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
M: Andrii Nakryiko <andrii@kernel.org>
R: Martin KaFai Lau <kafai@fb.com>
R: Song Liu <songliubraving@fb.com>
R: Martin KaFai Lau <martin.lau@linux.dev>
R: Song Liu <song@kernel.org>
R: Yonghong Song <yhs@fb.com>
R: John Fastabend <john.fastabend@gmail.com>
R: KP Singh <kpsingh@kernel.org>
L: netdev@vger.kernel.org
R: Stanislav Fomichev <sdf@google.com>
R: Hao Luo <haoluo@google.com>
R: Jiri Olsa <jolsa@kernel.org>
L: bpf@vger.kernel.org
S: Supported
W: https://bpf.io/
@ -3665,12 +3665,9 @@ F: scripts/pahole-version.sh
F: tools/bpf/
F: tools/lib/bpf/
F: tools/testing/selftests/bpf/
N: bpf
K: bpf
BPF JIT for ARM
M: Shubham Bansal <illusionist.neo@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Odd Fixes
F: arch/arm/net/
@ -3679,7 +3676,6 @@ BPF JIT for ARM64
M: Daniel Borkmann <daniel@iogearbox.net>
M: Alexei Starovoitov <ast@kernel.org>
M: Zi Shen Lim <zlim.lnx@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
F: arch/arm64/net/
@ -3687,14 +3683,12 @@ F: arch/arm64/net/
BPF JIT for MIPS (32-BIT AND 64-BIT)
M: Johan Almbladh <johan.almbladh@anyfinetworks.com>
M: Paul Burton <paulburton@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
F: arch/mips/net/
BPF JIT for NFP NICs
M: Jakub Kicinski <kuba@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Odd Fixes
F: drivers/net/ethernet/netronome/nfp/bpf/
@ -3702,7 +3696,6 @@ F: drivers/net/ethernet/netronome/nfp/bpf/
BPF JIT for POWERPC (32-BIT AND 64-BIT)
M: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
M: Michael Ellerman <mpe@ellerman.id.au>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
F: arch/powerpc/net/
@ -3710,7 +3703,6 @@ F: arch/powerpc/net/
BPF JIT for RISC-V (32-bit)
M: Luke Nelson <luke.r.nels@gmail.com>
M: Xi Wang <xi.wang@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
F: arch/riscv/net/
@ -3718,7 +3710,6 @@ X: arch/riscv/net/bpf_jit_comp64.c
BPF JIT for RISC-V (64-bit)
M: Björn Töpel <bjorn@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
F: arch/riscv/net/
@ -3728,7 +3719,6 @@ BPF JIT for S390
M: Ilya Leoshkevich <iii@linux.ibm.com>
M: Heiko Carstens <hca@linux.ibm.com>
M: Vasily Gorbik <gor@linux.ibm.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
F: arch/s390/net/
@ -3736,14 +3726,12 @@ X: arch/s390/net/pnet.c
BPF JIT for SPARC (32-BIT AND 64-BIT)
M: David S. Miller <davem@davemloft.net>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Odd Fixes
F: arch/sparc/net/
BPF JIT for X86 32-BIT
M: Wang YanQing <udknight@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Odd Fixes
F: arch/x86/net/bpf_jit_comp32.c
@ -3751,13 +3739,60 @@ F: arch/x86/net/bpf_jit_comp32.c
BPF JIT for X86 64-BIT
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
F: arch/x86/net/
X: arch/x86/net/bpf_jit_comp32.c
BPF LSM (Security Audit and Enforcement using BPF)
BPF [CORE]
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
R: John Fastabend <john.fastabend@gmail.com>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/verifier.c
F: kernel/bpf/tnum.c
F: kernel/bpf/core.c
F: kernel/bpf/syscall.c
F: kernel/bpf/dispatcher.c
F: kernel/bpf/trampoline.c
F: include/linux/bpf*
F: include/linux/filter.h
BPF [BTF]
M: Martin KaFai Lau <martin.lau@linux.dev>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/btf.c
F: include/linux/btf*
BPF [TRACING]
M: Song Liu <song@kernel.org>
R: Jiri Olsa <jolsa@kernel.org>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/trace/bpf_trace.c
F: kernel/bpf/stackmap.c
BPF [NETWORKING] (tc BPF, sock_addr)
M: Martin KaFai Lau <martin.lau@linux.dev>
M: Daniel Borkmann <daniel@iogearbox.net>
R: John Fastabend <john.fastabend@gmail.com>
L: bpf@vger.kernel.org
L: netdev@vger.kernel.org
S: Maintained
F: net/core/filter.c
F: net/sched/act_bpf.c
F: net/sched/cls_bpf.c
BPF [NETWORKING] (struct_ops, reuseport)
M: Martin KaFai Lau <martin.lau@linux.dev>
L: bpf@vger.kernel.org
L: netdev@vger.kernel.org
S: Maintained
F: kernel/bpf/bpf_struct*
BPF [SECURITY & LSM] (Security Audit and Enforcement using BPF)
M: KP Singh <kpsingh@kernel.org>
R: Florent Revest <revest@chromium.org>
R: Brendan Jackman <jackmanb@chromium.org>
@ -3768,7 +3803,27 @@ F: include/linux/bpf_lsm.h
F: kernel/bpf/bpf_lsm.c
F: security/bpf/
BPF L7 FRAMEWORK
BPF [STORAGE & CGROUPS]
M: Martin KaFai Lau <martin.lau@linux.dev>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/cgroup.c
F: kernel/bpf/*storage.c
F: kernel/bpf/bpf_lru*
BPF [RINGBUF]
M: Andrii Nakryiko <andrii@kernel.org>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/ringbuf.c
BPF [ITERATOR]
M: Yonghong Song <yhs@fb.com>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/*iter.c
BPF [L7 FRAMEWORK] (sockmap)
M: John Fastabend <john.fastabend@gmail.com>
M: Jakub Sitnicki <jakub@cloudflare.com>
L: netdev@vger.kernel.org
@ -3781,13 +3836,31 @@ F: net/ipv4/tcp_bpf.c
F: net/ipv4/udp_bpf.c
F: net/unix/unix_bpf.c
BPFTOOL
BPF [LIBRARY] (libbpf)
M: Andrii Nakryiko <andrii@kernel.org>
L: bpf@vger.kernel.org
S: Maintained
F: tools/lib/bpf/
BPF [TOOLING] (bpftool)
M: Quentin Monnet <quentin@isovalent.com>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/disasm.*
F: tools/bpf/bpftool/
BPF [SELFTESTS] (Test Runners & Infrastructure)
M: Andrii Nakryiko <andrii@kernel.org>
R: Mykola Lysenko <mykolal@fb.com>
L: bpf@vger.kernel.org
S: Maintained
F: tools/testing/selftests/bpf/
BPF [MISC]
L: bpf@vger.kernel.org
S: Odd Fixes
K: (?:\b|_)bpf(?:\b|_)
BROADCOM B44 10/100 ETHERNET DRIVER
M: Michael Chan <michael.chan@broadcom.com>
L: netdev@vger.kernel.org
@ -4984,6 +5057,7 @@ Q: http://patchwork.kernel.org/project/linux-clk/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
F: Documentation/devicetree/bindings/clock/
F: drivers/clk/
F: include/dt-bindings/clock/
F: include/linux/clk-pr*
F: include/linux/clk/
F: include/linux/of_clk.h
@ -5034,7 +5108,7 @@ COMPUTE EXPRESS LINK (CXL)
M: Alison Schofield <alison.schofield@intel.com>
M: Vishal Verma <vishal.l.verma@intel.com>
M: Ira Weiny <ira.weiny@intel.com>
M: Ben Widawsky <ben.widawsky@intel.com>
M: Ben Widawsky <bwidawsk@kernel.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-cxl@vger.kernel.org
S: Maintained
@ -5986,7 +6060,6 @@ DMA MAPPING HELPERS
M: Christoph Hellwig <hch@lst.de>
M: Marek Szyprowski <m.szyprowski@samsung.com>
R: Robin Murphy <robin.murphy@arm.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
@ -5999,7 +6072,6 @@ F: kernel/dma/
DMA MAPPING BENCHMARK
M: Xiang Chen <chenxiang66@hisilicon.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
F: kernel/dma/map_benchmark.c
F: tools/testing/selftests/dma/
@ -7584,7 +7656,6 @@ F: drivers/gpu/drm/exynos/exynos_dp*
EXYNOS SYSMMU (IOMMU) driver
M: Marek Szyprowski <m.szyprowski@samsung.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Maintained
F: drivers/iommu/exynos-iommu.c
@ -9843,7 +9914,10 @@ INTEL ASoC DRIVERS
M: Cezary Rojewski <cezary.rojewski@intel.com>
M: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
M: Liam Girdwood <liam.r.girdwood@linux.intel.com>
M: Jie Yang <yang.jie@linux.intel.com>
M: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
M: Bard Liao <yung-chuan.liao@linux.intel.com>
M: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
M: Kai Vehmanen <kai.vehmanen@linux.intel.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/intel/
@ -10006,7 +10080,6 @@ F: drivers/hid/intel-ish-hid/
INTEL IOMMU (VT-d)
M: David Woodhouse <dwmw2@infradead.org>
M: Lu Baolu <baolu.lu@linux.intel.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
@ -10386,7 +10459,6 @@ F: include/linux/iomap.h
IOMMU DRIVERS
M: Joerg Roedel <joro@8bytes.org>
M: Will Deacon <will@kernel.org>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
@ -12546,7 +12618,6 @@ F: drivers/i2c/busses/i2c-mt65xx.c
MEDIATEK IOMMU DRIVER
M: Yong Wu <yong.wu@mediatek.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
S: Supported
@ -14299,7 +14370,8 @@ S: Maintained
F: drivers/net/phy/nxp-c45-tja11xx.c
NXP FSPI DRIVER
M: Ashish Kumar <ashish.kumar@nxp.com>
M: Han Xu <han.xu@nxp.com>
M: Haibo Chen <haibo.chen@nxp.com>
R: Yogesh Gaur <yogeshgaur.83@gmail.com>
L: linux-spi@vger.kernel.org
S: Maintained
@ -14405,9 +14477,8 @@ F: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
F: sound/soc/codecs/tfa989x.c
NXP-NCI NFC DRIVER
R: Charles Gorand <charles.gorand@effinnov.com>
L: linux-nfc@lists.01.org (subscribers-only)
S: Supported
S: Orphan
F: Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
F: drivers/nfc/nxp-nci
@ -15803,7 +15874,7 @@ F: drivers/pinctrl/freescale/
PIN CONTROLLER - INTEL
M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Andy Shevchenko <andy@kernel.org>
S: Maintained
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
F: drivers/pinctrl/intel/
@ -16325,7 +16396,7 @@ F: drivers/crypto/qat/
QCOM AUDIO (ASoC) DRIVERS
M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
M: Banajit Goswami <bgoswami@codeaurora.org>
M: Banajit Goswami <bgoswami@quicinc.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/codecs/lpass-va-macro.c
@ -16606,7 +16677,6 @@ F: drivers/i2c/busses/i2c-qcom-cci.c
QUALCOMM IOMMU
M: Rob Clark <robdclark@gmail.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
L: linux-arm-msm@vger.kernel.org
S: Maintained
@ -17218,12 +17288,15 @@ N: riscv
K: riscv
RISC-V/MICROCHIP POLARFIRE SOC SUPPORT
M: Lewis Hanly <lewis.hanly@microchip.com>
M: Conor Dooley <conor.dooley@microchip.com>
M: Daire McNamara <daire.mcnamara@microchip.com>
L: linux-riscv@lists.infradead.org
S: Supported
F: arch/riscv/boot/dts/microchip/
F: drivers/char/hw_random/mpfs-rng.c
F: drivers/clk/microchip/clk-mpfs.c
F: drivers/mailbox/mailbox-mpfs.c
F: drivers/pci/controller/pcie-microchip-host.c
F: drivers/soc/microchip/
F: drivers/usb/musb/mpfs.c
F: include/soc/microchip/mpfs.h
@ -18121,6 +18194,7 @@ F: drivers/misc/sgi-xp/
SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
M: Karsten Graul <kgraul@linux.ibm.com>
M: Wenjia Zhang <wenjia@linux.ibm.com>
L: linux-s390@vger.kernel.org
S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
@ -18753,8 +18827,10 @@ F: sound/soc/
SOUND - SOUND OPEN FIRMWARE (SOF) DRIVERS
M: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
M: Liam Girdwood <lgirdwood@gmail.com>
M: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
M: Bard Liao <yung-chuan.liao@linux.intel.com>
M: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
M: Kai Vehmanen <kai.vehmanen@linux.intel.com>
R: Kai Vehmanen <kai.vehmanen@linux.intel.com>
M: Daniel Baluta <daniel.baluta@nxp.com>
L: sound-open-firmware@alsa-project.org (moderated for non-subscribers)
S: Supported
@ -19233,7 +19309,6 @@ F: arch/x86/boot/video*
SWIOTLB SUBSYSTEM
M: Christoph Hellwig <hch@infradead.org>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
@ -21909,7 +21984,6 @@ XEN SWIOTLB SUBSYSTEM
M: Juergen Gross <jgross@suse.com>
M: Stefano Stabellini <sstabellini@kernel.org>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Supported
F: arch/x86/xen/*swiotlb*

2
Makefile
Просмотреть файл

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 19
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION = -rc7
NAME = Superb Owl
# *DOCUMENTATION*

3
arch/arm/boot/dts/at91-sam9x60ek.dts
Просмотреть файл

@ -233,10 +233,9 @@
status = "okay";
eeprom@53 {
compatible = "atmel,24c32";
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
size = <128>;
status = "okay";
};
};

6
arch/arm/boot/dts/at91-sama5d2_icp.dts
Просмотреть файл

@ -329,21 +329,21 @@
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
status = "okay";
};
eeprom@52 {
compatible = "atmel,24c32";
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
status = "disabled";
};
eeprom@53 {
compatible = "atmel,24c32";
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
status = "disabled";

2
arch/arm/boot/dts/imx6qdl-ts7970.dtsi
Просмотреть файл

@ -226,7 +226,7 @@
reg = <0x28>;
#gpio-cells = <2>;
gpio-controller;
ngpio = <32>;
ngpios = <62>;
};
sgtl5000: codec@a {

9
arch/arm/boot/dts/imx6ull-colibri.dtsi
Просмотреть файл

@ -166,7 +166,7 @@
atmel_mxt_ts: touchscreen@4a {
compatible = "atmel,maxtouch";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_atmel_conn>;
pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
reg = <0x4a>;
interrupt-parent = <&gpio5>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */
@ -331,7 +331,6 @@
pinctrl_atmel_conn: atmelconngrp {
fsl,pins = <
MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */
MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */
>;
};
@ -684,6 +683,12 @@
};
&iomuxc_snvs {
pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */
>;
};
pinctrl_snvs_gpio1: snvsgpio1grp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */

4
arch/arm/boot/dts/imx7d-smegw01.dts
Просмотреть файл

@ -216,10 +216,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
non-removable;
cap-sd-highspeed;
sd-uhs-ddr50;
mmc-ddr-1_8v;
vmmc-supply = <&reg_wifi>;
enable-sdio-wakeup;
status = "okay";

8
arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
Просмотреть файл

@ -87,22 +87,22 @@
phy4: ethernet-phy@5 {
reg = <5>;
coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy5: ethernet-phy@6 {
reg = <6>;
coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy6: ethernet-phy@7 {
reg = <7>;
coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy7: ethernet-phy@8 {
reg = <8>;
coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
};

30
arch/arm/boot/dts/qcom-msm8974.dtsi
Просмотреть файл

@ -506,6 +506,8 @@
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_default>;
status = "disabled";
};
@ -581,6 +583,9 @@
interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart1_default>;
pinctrl-1 = <&blsp2_uart1_sleep>;
status = "disabled";
};
@ -599,6 +604,8 @@
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_uart4_default>;
status = "disabled";
};
@ -639,6 +646,9 @@
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c6_default>;
pinctrl-1 = <&blsp2_i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
@ -1256,7 +1266,7 @@
};
};
blsp1_uart2_active: blsp1-uart2-active {
blsp1_uart2_default: blsp1-uart2-default {
rx {
pins = "gpio5";
function = "blsp_uart2";
@ -1272,7 +1282,7 @@
};
};
blsp2_uart1_active: blsp2-uart1-active {
blsp2_uart1_default: blsp2-uart1-default {
tx-rts {
pins = "gpio41", "gpio44";
function = "blsp_uart7";
@ -1295,7 +1305,7 @@
bias-pull-down;
};
blsp2_uart4_active: blsp2-uart4-active {
blsp2_uart4_default: blsp2-uart4-default {
tx-rts {
pins = "gpio53", "gpio56";
function = "blsp_uart10";
@ -1406,7 +1416,19 @@
bias-pull-up;
};
/* BLSP2_I2C6 info is missing - nobody uses it though? */
blsp2_i2c6_default: blsp2-i2c6-default {
pins = "gpio87", "gpio88";
function = "blsp_i2c12";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c6_sleep: blsp2-i2c6-sleep {
pins = "gpio87", "gpio88";
function = "blsp_i2c12";
drive-strength = <2>;
bias-pull-up;
};
spi8_default: spi8_default {
mosi {

2
arch/arm/boot/dts/sama5d2.dtsi
Просмотреть файл

@ -1124,7 +1124,7 @@
clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
clock-names = "pclk", "gclk";
assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
status = "disabled";
};

58
arch/arm/boot/dts/stm32mp15-scmi.dtsi
Просмотреть файл

@ -27,6 +27,37 @@
reg = <0x16>;
#reset-cells = <1>;
};
scmi_voltd: protocol@17 {
reg = <0x17>;
scmi_reguls: regulators {
#address-cells = <1>;
#size-cells = <0>;
scmi_reg11: reg11@0 {
reg = <0>;
regulator-name = "reg11";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
scmi_reg18: reg18@1 {
voltd-name = "reg18";
reg = <1>;
regulator-name = "reg18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
scmi_usb33: usb33@2 {
reg = <2>;
regulator-name = "usb33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
};
};
};
@ -45,3 +76,30 @@
};
};
};
&reg11 {
status = "disabled";
};
&reg18 {
status = "disabled";
};
&usb33 {
status = "disabled";
};
&usbotg_hs {
usb33d-supply = <&scmi_usb33>;
};
&usbphyc {
vdda1v1-supply = <&scmi_reg11>;
vdda1v8-supply = <&scmi_reg18>;
};
/delete-node/ &clk_hse;
/delete-node/ &clk_hsi;
/delete-node/ &clk_lse;
/delete-node/ &clk_lsi;
/delete-node/ &clk_csi;

6
arch/arm/boot/dts/stm32mp151.dtsi
Просмотреть файл

@ -565,7 +565,7 @@
compatible = "st,stm32-cec";
reg = <0x40016000 0x400>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc CEC_K>, <&clk_lse>;
clocks = <&rcc CEC_K>, <&rcc CEC>;
clock-names = "cec", "hdmi-cec";
status = "disabled";
};
@ -1474,7 +1474,7 @@
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
clocks = <&rcc USBH>, <&usbphyc>;
clocks = <&usbphyc>, <&rcc USBH>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -1483,7 +1483,7 @@
usbh_ehci: usb@5800d000 {
compatible = "generic-ehci";
reg = <0x5800d000 0x1000>;
clocks = <&rcc USBH>;
clocks = <&usbphyc>, <&rcc USBH>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
companion = <&usbh_ohci>;

4
arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
Просмотреть файл

@ -29,6 +29,10 @@
clocks = <&scmi_clk CK_SCMI_MPU>;
};
&dsi {
clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
};
&gpioz {
clocks = <&scmi_clk CK_SCMI_GPIOZ>;
};

1
arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
Просмотреть файл

@ -35,6 +35,7 @@
};
&dsi {
phy-dsi-supply = <&scmi_reg18>;
clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
};

4
arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
Просмотреть файл

@ -34,6 +34,10 @@
resets = <&scmi_reset RST_SCMI_CRYP1>;
};
&dsi {
clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
};
&gpioz {
clocks = <&scmi_clk CK_SCMI_GPIOZ>;
};

1
arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
Просмотреть файл

@ -36,6 +36,7 @@
};
&dsi {
phy-dsi-supply = <&scmi_reg18>;
clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
};

2
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
Просмотреть файл

@ -169,7 +169,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mxicy,mx25l1606e", "winbond,w25q128";
compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
};

1
arch/arm/configs/mxs_defconfig
Просмотреть файл

@ -93,6 +93,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_MXSFB=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y

13
arch/arm/include/asm/domain.h
Просмотреть файл

@ -112,19 +112,6 @@ static __always_inline void set_domain(unsigned int val)
}
#endif
#ifdef CONFIG_CPU_USE_DOMAINS
#define modify_domain(dom,type) \
do { \
unsigned int domain = get_domain(); \
domain &= ~domain_mask(dom); \
domain = domain | domain_val(dom, type); \
set_domain(domain); \
} while (0)
#else
static inline void modify_domain(unsigned dom, unsigned type) { }
#endif
/*
* Generate the T (user) versions of the LDR/STR and related
* instructions (inline assembly)

1
arch/arm/include/asm/mach/map.h
Просмотреть файл

@ -27,6 +27,7 @@ enum {
MT_HIGH_VECTORS,
MT_MEMORY_RWX,
MT_MEMORY_RW,
MT_MEMORY_RO,
MT_ROM,
MT_MEMORY_RWX_NONCACHED,
MT_MEMORY_RW_DTCM,

26
arch/arm/include/asm/ptrace.h
Просмотреть файл

@ -163,5 +163,31 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1; \
})
/*
* Update ITSTATE after normal execution of an IT block instruction.
*
* The 8 IT state bits are split into two parts in CPSR:
* ITSTATE<1:0> are in CPSR<26:25>
* ITSTATE<7:2> are in CPSR<15:10>
*/
static inline unsigned long it_advance(unsigned long cpsr)
{
if ((cpsr & 0x06000400) == 0) {
/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
cpsr &= ~PSR_IT_MASK;
} else {
/* We need to shift left ITSTATE<4:0> */
const unsigned long mask = 0x06001c00; /* Mask ITSTATE<4:0> */
unsigned long it = cpsr & mask;
it <<= 1;
it |= it >> (27 - 10); /* Carry ITSTATE<2> to correct place */
it &= mask;
cpsr &= ~mask;
cpsr |= it;
}
return cpsr;
}
#endif /* __ASSEMBLY__ */
#endif

1
arch/arm/kernel/entry-common.S
Просмотреть файл

@ -302,6 +302,7 @@ local_restart:
b ret_fast_syscall
#endif
ENDPROC(vector_swi)
.ltorg
/*
* This is the really slow path. We're going to be doing

12
arch/arm/mach-at91/pm.c
Просмотреть файл

@ -202,7 +202,7 @@ static const struct wakeup_source_info ws_info[] = {
static const struct of_device_id sama5d2_ws_ids[] = {
{ .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] },
{ .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] },
{ .compatible = "atmel,sama5d2-rtc", .data = &ws_info[1] },
{ .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] },
{ .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
{ .compatible = "usb-ohci", .data = &ws_info[2] },
@ -213,24 +213,24 @@ static const struct of_device_id sama5d2_ws_ids[] = {
};
static const struct of_device_id sam9x60_ws_ids[] = {
{ .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
{ .compatible = "microchip,sam9x60-rtc", .data = &ws_info[1] },
{ .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
{ .compatible = "usb-ohci", .data = &ws_info[2] },
{ .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
{ .compatible = "usb-ehci", .data = &ws_info[2] },
{ .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
{ .compatible = "microchip,sam9x60-rtt", .data = &ws_info[4] },
{ .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] },
{ /* sentinel */ }
};
static const struct of_device_id sama7g5_ws_ids[] = {
{ .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
{ .compatible = "microchip,sama7g5-rtc", .data = &ws_info[1] },
{ .compatible = "microchip,sama7g5-ohci", .data = &ws_info[2] },
{ .compatible = "usb-ohci", .data = &ws_info[2] },
{ .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
{ .compatible = "usb-ehci", .data = &ws_info[2] },
{ .compatible = "microchip,sama7g5-sdhci", .data = &ws_info[3] },
{ .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
{ .compatible = "microchip,sama7g5-rtt", .data = &ws_info[4] },
{ /* sentinel */ }
};
@ -1079,7 +1079,7 @@ securam_fail:
return ret;
}
static void at91_pm_secure_init(void)
static void __init at91_pm_secure_init(void)
{
int suspend_mode;
struct arm_smccc_res res;

2
arch/arm/mach-meson/platsmp.c
Просмотреть файл

@ -71,6 +71,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
}
sram_base = of_iomap(node, 0);
of_node_put(node);
if (!sram_base) {
pr_err("Couldn't map SRAM registers\n");
return;
@ -91,6 +92,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
}
scu_base = of_iomap(node, 0);
of_node_put(node);
if (!scu_base) {
pr_err("Couldn't map SCU registers\n");
return;

7
arch/arm/mach-rockchip/pm.c
Просмотреть файл

@ -311,7 +311,7 @@ void __init rockchip_suspend_init(void)
&match);
if (!match) {
pr_err("Failed to find PMU node\n");
return;
goto out_put;
}
pm_data = (struct rockchip_pm_data *) match->data;
@ -320,9 +320,12 @@ void __init rockchip_suspend_init(void)
if (ret) {
pr_err("%s: matches init error %d\n", __func__, ret);
return;
goto out_put;
}
}
suspend_set_ops(pm_data->ops);
out_put:
of_node_put(np);
}

6
arch/arm/mm/Kconfig
Просмотреть файл

@ -631,7 +631,11 @@ config CPU_USE_DOMAINS
bool
help
This option enables or disables the use of domain switching
via the set_fs() function.
using the DACR (domain access control register) to protect memory
domains from each other. In Linux we use three domains: kernel, user
and IO. The domains are used to protect userspace from kernelspace
and to handle IO-space as a special type of memory by assigning
manager or client roles to running code (such as a process).
config CPU_V7M_NUM_IRQ
int "Number of external interrupts connected to the NVIC"

3
arch/arm/mm/alignment.c
Просмотреть файл

@ -935,6 +935,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
if (type == TYPE_LDST)
do_alignment_finish_ldst(addr, instr, regs, offset);
if (thumb_mode(regs))
regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
return 0;
bad_or_fault:

15
arch/arm/mm/mmu.c
Просмотреть файл

@ -296,6 +296,13 @@ static struct mem_type mem_types[] __ro_after_init = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_RO] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_XN | L_PTE_RDONLY,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
},
[MT_ROM] = {
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
@ -489,6 +496,7 @@ static void __init build_mem_type_table(void)
/* Also setup NX memory mapping */
mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_XN;
}
if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
/*
@ -568,6 +576,7 @@ static void __init build_mem_type_table(void)
mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
#endif
/*
@ -587,6 +596,8 @@ static void __init build_mem_type_table(void)
mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_RO].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
@ -647,6 +658,8 @@ static void __init build_mem_type_table(void)
mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_RO].prot_sect |= ecc_mask | cp->pmd;
mem_types[MT_MEMORY_RO].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
mem_types[MT_ROM].prot_sect |= cp->pmd;
@ -1360,7 +1373,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
map.virtual = FDT_FIXED_BASE;
map.length = FDT_FIXED_SIZE;
map.type = MT_ROM;
map.type = MT_MEMORY_RO;
create_mapping(&map);
}

9
arch/arm/mm/proc-v7-bugs.c
Просмотреть файл

@ -108,8 +108,7 @@ static unsigned int spectre_v2_install_workaround(unsigned int method)
#else
static unsigned int spectre_v2_install_workaround(unsigned int method)
{
pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n",
smp_processor_id());
pr_info_once("Spectre V2: workarounds disabled by configuration\n");
return SPECTRE_VULNERABLE;
}
@ -209,10 +208,10 @@ static int spectre_bhb_install_workaround(int method)
return SPECTRE_VULNERABLE;
spectre_bhb_method = method;
}
pr_info("CPU%u: Spectre BHB: using %s workaround\n",
smp_processor_id(), spectre_bhb_method_name(method));
pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
smp_processor_id(), spectre_bhb_method_name(method));
}
return SPECTRE_MITIGATED;
}

26
arch/arm/probes/decode.h
Просмотреть файл

@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/stddef.h>
#include <asm/probes.h>
#include <asm/ptrace.h>
#include <asm/kprobes.h>
void __init arm_probes_decode_init(void);
@ -35,31 +36,6 @@ void __init find_str_pc_offset(void);
#endif
/*
* Update ITSTATE after normal execution of an IT block instruction.
*
* The 8 IT state bits are split into two parts in CPSR:
* ITSTATE<1:0> are in CPSR<26:25>
* ITSTATE<7:2> are in CPSR<15:10>
*/
static inline unsigned long it_advance(unsigned long cpsr)
{
if ((cpsr & 0x06000400) == 0) {
/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
cpsr &= ~PSR_IT_MASK;
} else {
/* We need to shift left ITSTATE<4:0> */
const unsigned long mask = 0x06001c00; /* Mask ITSTATE<4:0> */
unsigned long it = cpsr & mask;
it <<= 1;
it |= it >> (27 - 10); /* Carry ITSTATE<2> to correct place */
it &= mask;
cpsr &= ~mask;
cpsr |= it;
}
return cpsr;
}
static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
{
long cpsr = regs->ARM_cpsr;

6
arch/arm/xen/p2m.c
Просмотреть файл

@ -63,11 +63,12 @@ out:
unsigned long __pfn_to_mfn(unsigned long pfn)
{
struct rb_node *n = phys_to_mach.rb_node;
struct rb_node *n;
struct xen_p2m_entry *entry;
unsigned long irqflags;
read_lock_irqsave(&p2m_lock, irqflags);
n = phys_to_mach.rb_node;
while (n) {
entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
if (entry->pfn <= pfn &&
@ -152,10 +153,11 @@ bool __set_phys_to_machine_multi(unsigned long pfn,
int rc;
unsigned long irqflags;
struct xen_p2m_entry *p2m_entry;
struct rb_node *n = phys_to_mach.rb_node;
struct rb_node *n;
if (mfn == INVALID_P2M_ENTRY) {
write_lock_irqsave(&p2m_lock, irqflags);
n = phys_to_mach.rb_node;
while (n) {
p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
if (p2m_entry->pfn <= pfn &&

8
arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
Просмотреть файл

@ -9,6 +9,14 @@
/delete-node/ cpu@3;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,

2
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
Просмотреть файл

@ -29,6 +29,8 @@
device_type = "cpu";
compatible = "brcm,brahma-b53";
reg = <0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0xfff8>;
next-level-cache = <&l2>;
};

5
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
Просмотреть файл

@ -224,9 +224,12 @@
little-endian;
};
efuse@1e80000 {
sfp: efuse@1e80000 {
compatible = "fsl,ls1028a-sfp";
reg = <0x0 0x1e80000 0x0 0x10000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "sfp";
#address-cells = <1>;
#size-cells = <1>;

88
arch/arm64/boot/dts/freescale/imx8mp-evk.dts
Просмотреть файл

@ -395,41 +395,41 @@
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x10
>;
};
@ -461,28 +461,28 @@
pinctrl_gpio_led: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_i2c5: i2c5grp {
fsl,pins = <
MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3
MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3
MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c2
MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2
>;
};
@ -500,20 +500,20 @@
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
>;
};
pinctrl_usb1_vbus: usb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19
MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10
>;
};
@ -525,7 +525,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -537,7 +537,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -549,7 +549,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};

40
arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
Просмотреть файл

@ -110,28 +110,28 @@
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x19
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x10
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40
>;
};
@ -151,7 +151,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -163,13 +163,13 @@
pinctrl_reg_usb1: regusb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19
MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x10
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
};

48
arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
Просмотреть файл

@ -116,48 +116,48 @@
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e2
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e2
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x40
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x40
>;
};
@ -175,7 +175,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -187,7 +187,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -199,7 +199,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
};

116
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
Просмотреть файл

@ -622,15 +622,15 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000041 /* DIO0 */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000041 /* DIO1 */
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000041 /* M2SKT_OFF# */
MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000159 /* PCIE1_WDIS# */
MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000159 /* PCIE2_WDIS# */
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000159 /* PCIE3_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000041 /* M2SKT_RST# */
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000159 /* M2SKT_WDIS# */
MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000159 /* M2SKT_GDIS# */
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */
MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000150 /* PCIE1_WDIS# */
MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000150 /* M2SKT_GDIS# */
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
@ -639,47 +639,47 @@
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x159
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x150
>;
};
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x141 /* RST# */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x159 /* IRQ# */
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x140 /* RST# */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x150 /* IRQ# */
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x141
MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x141
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x140
MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x140
>;
};
@ -692,61 +692,61 @@
pinctrl_gsc: gscgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x159
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x150
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2
>;
};
pinctrl_ksz: kszgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x159 /* IRQ# */
MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x141 /* RST# */
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x150 /* IRQ# */
MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x140 /* RST# */
>;
};
pinctrl_gpio_leds: ledgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x19
MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x19
MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x10
MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x10
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x141
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x140
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x141
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140
>;
};
@ -758,13 +758,13 @@
pinctrl_reg_usb2: regusb2grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x141
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140
>;
};
pinctrl_reg_wifi: regwifigrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x119
MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x110
>;
};
@ -811,7 +811,7 @@
pinctrl_uart3_gpio: uart3gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x119
MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x110
>;
};

2
arch/arm64/boot/dts/freescale/imx8mp.dtsi
Просмотреть файл

@ -595,7 +595,7 @@
pgc_ispdwp: power-domain@18 {
#power-domain-cells = <0>;
reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
clocks = <&clk IMX8MP_CLK_MEDIA_ISP_DIV>;
clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
};
};
};

2
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
Просмотреть файл

@ -74,7 +74,7 @@
vdd_l17_29-supply = <&vph_pwr>;
vdd_l20_21-supply = <&vph_pwr>;
vdd_l25-supply = <&pm8994_s5>;
vdd_lvs1_2 = <&pm8994_s4>;
vdd_lvs1_2-supply = <&pm8994_s4>;
/* S1, S2, S6 and S12 are managed by RPMPD */

2
arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
Просмотреть файл

@ -171,7 +171,7 @@
vdd_l17_29-supply = <&vph_pwr>;
vdd_l20_21-supply = <&vph_pwr>;
vdd_l25-supply = <&pm8994_s5>;
vdd_lvs1_2 = <&pm8994_s4>;
vdd_lvs1_2-supply = <&pm8994_s4>;
/* S1, S2, S6 and S12 are managed by RPMPD */

4
arch/arm64/boot/dts/qcom/msm8994.dtsi
Просмотреть файл

@ -100,7 +100,7 @@
CPU6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
@ -108,7 +108,7 @@
CPU7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};

2
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
Просмотреть файл

@ -5,7 +5,7 @@
* Copyright 2021 Google LLC.
*/
#include "sc7180-trogdor.dtsi"
/* This file must be included after sc7180-trogdor.dtsi */
/ {
/* BOARD-SPECIFIC TOP LEVEL NODES */

2
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
Просмотреть файл

@ -5,7 +5,7 @@
* Copyright 2020 Google LLC.
*/
#include "sc7180-trogdor.dtsi"
/* This file must be included after sc7180-trogdor.dtsi */
&ap_sar_sensor {
semtech,cs0-ground;

2
arch/arm64/boot/dts/qcom/sdm845.dtsi
Просмотреть файл

@ -4244,7 +4244,7 @@
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "core";

14
arch/arm64/boot/dts/qcom/sm8450.dtsi
Просмотреть файл

@ -2853,6 +2853,16 @@
reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */
<0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic_its: msi-controller@17140000 {
compatible = "arm,gic-v3-its";
reg = <0x0 0x17140000 0x0 0x20000>;
msi-controller;
#msi-cells = <1>;
};
};
timer@17420000 {
@ -3037,8 +3047,8 @@
iommus = <&apps_smmu 0xe0 0x0>;
interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
interconnect-names = "ufs-ddr", "cpu-ufs";
clock-names =
"core_clk",

4
arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
Просмотреть файл

@ -376,7 +376,8 @@ camera: &i2c7 {
<&cru ACLK_VIO>,
<&cru ACLK_GIC_PRE>,
<&cru PCLK_DDR>,
<&cru ACLK_HDCP>;
<&cru ACLK_HDCP>,
<&cru ACLK_VDU>;
assigned-clock-rates =
<600000000>, <1600000000>,
<1000000000>,
@ -388,6 +389,7 @@ camera: &i2c7 {
<400000000>,
<200000000>,
<200000000>,
<400000000>,
<400000000>;
};

6
arch/arm64/boot/dts/rockchip/rk3399.dtsi
Просмотреть файл

@ -1462,7 +1462,8 @@
<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
<&cru ACLK_GIC_PRE>,
<&cru PCLK_DDR>;
<&cru PCLK_DDR>,
<&cru ACLK_VDU>;
assigned-clock-rates =
<594000000>, <800000000>,
<1000000000>,
@ -1473,7 +1474,8 @@
<100000000>, <50000000>,
<400000000>, <400000000>,
<200000000>,
<200000000>;
<200000000>,
<400000000>;
};
grf: syscon@ff770000 {

1
arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
Просмотреть файл

@ -687,6 +687,7 @@
};
&usb_host0_xhci {
dr_mode = "host";
status = "okay";
};

2
arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
Просмотреть файл

@ -133,7 +133,7 @@
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
clock_in_out = "input";
phy-mode = "rgmii-id";
phy-mode = "rgmii";
phy-supply = <&vcc_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim

30
arch/arm64/mm/hugetlbpage.c
Просмотреть файл

@ -214,6 +214,19 @@ static pte_t get_clear_contig(struct mm_struct *mm,
return orig_pte;
}
static pte_t get_clear_contig_flush(struct mm_struct *mm,
unsigned long addr,
pte_t *ptep,
unsigned long pgsize,
unsigned long ncontig)
{
pte_t orig_pte = get_clear_contig(mm, addr, ptep, pgsize, ncontig);
struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
flush_tlb_range(&vma, addr, addr + (pgsize * ncontig));
return orig_pte;
}
/*
* Changing some bits of contiguous entries requires us to follow a
* Break-Before-Make approach, breaking the whole contiguous set
@ -447,19 +460,20 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
int ncontig, i;
size_t pgsize = 0;
unsigned long pfn = pte_pfn(pte), dpfn;
struct mm_struct *mm = vma->vm_mm;
pgprot_t hugeprot;
pte_t orig_pte;
if (!pte_cont(pte))
return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
ncontig = find_num_contig(vma->vm_mm, addr, ptep, &pgsize);
ncontig = find_num_contig(mm, addr, ptep, &pgsize);
dpfn = pgsize >> PAGE_SHIFT;
if (!__cont_access_flags_changed(ptep, pte, ncontig))
return 0;
orig_pte = get_clear_contig(vma->vm_mm, addr, ptep, pgsize, ncontig);
orig_pte = get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
/* Make sure we don't lose the dirty or young state */
if (pte_dirty(orig_pte))
@ -470,7 +484,7 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
hugeprot = pte_pgprot(pte);
for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
set_pte_at(vma->vm_mm, addr, ptep, pfn_pte(pfn, hugeprot));
set_pte_at(mm, addr, ptep, pfn_pte(pfn, hugeprot));
return 1;
}
@ -492,7 +506,7 @@ void huge_ptep_set_wrprotect(struct mm_struct *mm,
ncontig = find_num_contig(mm, addr, ptep, &pgsize);
dpfn = pgsize >> PAGE_SHIFT;
pte = get_clear_contig(mm, addr, ptep, pgsize, ncontig);
pte = get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
pte = pte_wrprotect(pte);
hugeprot = pte_pgprot(pte);
@ -505,17 +519,15 @@ void huge_ptep_set_wrprotect(struct mm_struct *mm,
pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
struct mm_struct *mm = vma->vm_mm;
size_t pgsize;
int ncontig;
pte_t orig_pte;
if (!pte_cont(READ_ONCE(*ptep)))
return ptep_clear_flush(vma, addr, ptep);
ncontig = find_num_contig(vma->vm_mm, addr, ptep, &pgsize);
orig_pte = get_clear_contig(vma->vm_mm, addr, ptep, pgsize, ncontig);
flush_tlb_range(vma, addr, addr + pgsize * ncontig);
return orig_pte;
ncontig = find_num_contig(mm, addr, ptep, &pgsize);
return get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
}
static int __init hugetlbpage_init(void)

4
arch/loongarch/Kconfig
Просмотреть файл

@ -54,7 +54,6 @@ config LOONGARCH
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_ENTRY
select GENERIC_FIND_FIRST_BIT
select GENERIC_GETTIMEOFDAY
select GENERIC_IRQ_MULTI_HANDLER
select GENERIC_IRQ_PROBE
@ -77,7 +76,6 @@ config LOONGARCH
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_ASM_MODVERSIONS
select HAVE_CONTEXT_TRACKING
select HAVE_COPY_THREAD_TLS
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_DMA_CONTIGUOUS
select HAVE_EXIT_THREAD
@ -86,8 +84,6 @@ config LOONGARCH
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI
select HAVE_PERF_EVENTS

1
arch/loongarch/include/asm/fpregdef.h
Просмотреть файл

@ -48,6 +48,5 @@
#define fcsr1 $r1
#define fcsr2 $r2
#define fcsr3 $r3
#define vcsr16 $r16
#endif /* _ASM_FPREGDEF_H */

1
arch/loongarch/include/asm/page.h
Просмотреть файл

@ -6,6 +6,7 @@
#define _ASM_PAGE_H
#include <linux/const.h>
#include <asm/addrspace.h>
/*
* PAGE_SHIFT determines the page size

2
arch/loongarch/include/asm/processor.h
Просмотреть файл

@ -80,7 +80,6 @@ BUILD_FPR_ACCESS(64)
struct loongarch_fpu {
unsigned int fcsr;
unsigned int vcsr;
uint64_t fcc; /* 8x8 */
union fpureg fpr[NUM_FPU_REGS];
};
@ -161,7 +160,6 @@ struct thread_struct {
*/ \
.fpu = { \
.fcsr = 0, \
.vcsr = 0, \
.fcc = 0, \
.fpr = {{{0,},},}, \
}, \

1
arch/loongarch/kernel/asm-offsets.c
Просмотреть файл

@ -166,7 +166,6 @@ void output_thread_fpu_defines(void)
OFFSET(THREAD_FCSR, loongarch_fpu, fcsr);
OFFSET(THREAD_FCC, loongarch_fpu, fcc);
OFFSET(THREAD_VCSR, loongarch_fpu, vcsr);
BLANK();
}

10
arch/loongarch/kernel/fpu.S
Просмотреть файл

@ -146,16 +146,6 @@
movgr2fcsr fcsr0, \tmp0
.endm
.macro sc_save_vcsr base, tmp0
movfcsr2gr \tmp0, vcsr16
EX st.w \tmp0, \base, 0
.endm
.macro sc_restore_vcsr base, tmp0
EX ld.w \tmp0, \base, 0
movgr2fcsr vcsr16, \tmp0
.endm
/*
* Save a thread's fp context.
*/

1
arch/loongarch/kernel/numa.c
Просмотреть файл

@ -429,7 +429,6 @@ int __init init_numa_memory(void)
return 0;
}
EXPORT_SYMBOL(init_numa_memory);
#endif
void __init paging_init(void)

1
arch/loongarch/vdso/Makefile
Просмотреть файл

@ -21,6 +21,7 @@ ccflags-vdso += $(filter --target=%,$(KBUILD_CFLAGS))
endif
cflags-vdso := $(ccflags-vdso) \
-isystem $(shell $(CC) -print-file-name=include) \
$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
-O2 -g -fno-strict-aliasing -fno-common -fno-builtin -G0 \
-fno-stack-protector -fno-jump-tables -DDISABLE_BRANCH_PROFILING \

2
arch/openrisc/kernel/unwinder.c
Просмотреть файл

@ -25,7 +25,7 @@ struct or1k_frameinfo {
/*
* Verify a frameinfo structure. The return address should be a valid text
* address. The frame pointer may be null if its the last frame, otherwise
* the frame pointer should point to a location in the stack after the the
* the frame pointer should point to a location in the stack after the
* top of the next frame up.
*/
static inline int or1k_frameinfo_valid(struct or1k_frameinfo *frameinfo)

5
arch/parisc/kernel/asm-offsets.c
Просмотреть файл

@ -224,8 +224,13 @@ int main(void)
BLANK();
DEFINE(ASM_SIGFRAME_SIZE, PARISC_RT_SIGFRAME_SIZE);
DEFINE(SIGFRAME_CONTEXT_REGS, offsetof(struct rt_sigframe, uc.uc_mcontext) - PARISC_RT_SIGFRAME_SIZE);
#ifdef CONFIG_64BIT
DEFINE(ASM_SIGFRAME_SIZE32, PARISC_RT_SIGFRAME_SIZE32);
DEFINE(SIGFRAME_CONTEXT_REGS32, offsetof(struct compat_rt_sigframe, uc.uc_mcontext) - PARISC_RT_SIGFRAME_SIZE32);
#else
DEFINE(ASM_SIGFRAME_SIZE32, PARISC_RT_SIGFRAME_SIZE);
DEFINE(SIGFRAME_CONTEXT_REGS32, offsetof(struct rt_sigframe, uc.uc_mcontext) - PARISC_RT_SIGFRAME_SIZE);
#endif
BLANK();
DEFINE(ICACHE_BASE, offsetof(struct pdc_cache_info, ic_base));
DEFINE(ICACHE_STRIDE, offsetof(struct pdc_cache_info, ic_stride));

2
arch/parisc/kernel/unaligned.c
Просмотреть файл

@ -146,7 +146,7 @@ static int emulate_ldw(struct pt_regs *regs, int toreg, int flop)
" depw %%r0,31,2,%4\n"
"1: ldw 0(%%sr1,%4),%0\n"
"2: ldw 4(%%sr1,%4),%3\n"
" subi 32,%4,%2\n"
" subi 32,%2,%2\n"
" mtctl %2,11\n"
" vshd %0,%3,%0\n"
"3: \n"

4
arch/powerpc/Kconfig
Просмотреть файл

@ -358,6 +358,10 @@ config ARCH_SUSPEND_NONZERO_CPU
def_bool y
depends on PPC_POWERNV || PPC_PSERIES
config ARCH_HAS_ADD_PAGES
def_bool y
depends on ARCH_ENABLE_MEMORY_HOTPLUG
config PPC_DCR_NATIVE
bool

9
arch/powerpc/include/asm/bpf_perf_event.h Normal file
Просмотреть файл

@ -0,0 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_BPF_PERF_EVENT_H
#define _ASM_POWERPC_BPF_PERF_EVENT_H
#include <asm/ptrace.h>
typedef struct user_pt_regs bpf_user_pt_regs_t;
#endif /* _ASM_POWERPC_BPF_PERF_EVENT_H */

9
arch/powerpc/include/uapi/asm/bpf_perf_event.h
Просмотреть файл

@ -1,9 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
#define _UAPI__ASM_BPF_PERF_EVENT_H__
#include <asm/ptrace.h>
typedef struct user_pt_regs bpf_user_pt_regs_t;
#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */

2
arch/powerpc/kernel/prom_init_check.sh
Просмотреть файл

@ -13,7 +13,7 @@
# If you really need to reference something from prom_init.o add
# it to the list below:
grep "^CONFIG_KASAN=y$" .config >/dev/null
grep "^CONFIG_KASAN=y$" ${KCONFIG_CONFIG} >/dev/null
if [ $? -eq 0 ]
then
MEM_FUNCS="__memcpy __memset"

33
arch/powerpc/mm/mem.c
Просмотреть файл

@ -105,6 +105,37 @@ void __ref arch_remove_linear_mapping(u64 start, u64 size)
vm_unmap_aliases();
}
/*
* After memory hotplug the variables max_pfn, max_low_pfn and high_memory need
* updating.
*/
static void update_end_of_memory_vars(u64 start, u64 size)
{
unsigned long end_pfn = PFN_UP(start + size);
if (end_pfn > max_pfn) {
max_pfn = end_pfn;
max_low_pfn = end_pfn;
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
}
}
int __ref add_pages(int nid, unsigned long start_pfn, unsigned long nr_pages,
struct mhp_params *params)
{
int ret;
ret = __add_pages(nid, start_pfn, nr_pages, params);
if (ret)
return ret;
/* update max_pfn, max_low_pfn and high_memory */
update_end_of_memory_vars(start_pfn << PAGE_SHIFT,
nr_pages << PAGE_SHIFT);
return ret;
}
int __ref arch_add_memory(int nid, u64 start, u64 size,
struct mhp_params *params)
{
@ -115,7 +146,7 @@ int __ref arch_add_memory(int nid, u64 start, u64 size,
rc = arch_create_linear_mapping(nid, start, size, params);
if (rc)
return rc;
rc = __add_pages(nid, start_pfn, nr_pages, params);
rc = add_pages(nid, start_pfn, nr_pages, params);
if (rc)
arch_remove_linear_mapping(start, size);
return rc;

6
arch/powerpc/mm/nohash/book3e_pgtable.c
Просмотреть файл

@ -96,8 +96,8 @@ int __ref map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot)
pgdp = pgd_offset_k(ea);
p4dp = p4d_offset(pgdp, ea);
if (p4d_none(*p4dp)) {
pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
p4d_populate(&init_mm, p4dp, pmdp);
pudp = early_alloc_pgtable(PUD_TABLE_SIZE);
p4d_populate(&init_mm, p4dp, pudp);
}
pudp = pud_offset(p4dp, ea);
if (pud_none(*pudp)) {
@ -106,7 +106,7 @@ int __ref map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot)
}
pmdp = pmd_offset(pudp, ea);
if (!pmd_present(*pmdp)) {
ptep = early_alloc_pgtable(PAGE_SIZE);
ptep = early_alloc_pgtable(PTE_TABLE_SIZE);
pmd_populate_kernel(&init_mm, pmdp, ptep);
}
ptep = pte_offset_kernel(pmdp, ea);

16
arch/powerpc/platforms/powernv/rng.c
Просмотреть файл

@ -176,12 +176,8 @@ static int __init pnv_get_random_long_early(unsigned long *v)
NULL) != pnv_get_random_long_early)
return 0;
for_each_compatible_node(dn, NULL, "ibm,power-rng") {
if (rng_create(dn))
continue;
/* Create devices for hwrng driver */
of_platform_device_create(dn, NULL, NULL);
}
for_each_compatible_node(dn, NULL, "ibm,power-rng")
rng_create(dn);
if (!ppc_md.get_random_seed)
return 0;
@ -205,10 +201,18 @@ void __init pnv_rng_init(void)
static int __init pnv_rng_late_init(void)
{
struct device_node *dn;
unsigned long v;
/* In case it wasn't called during init for some other reason. */
if (ppc_md.get_random_seed == pnv_get_random_long_early)
pnv_get_random_long_early(&v);
if (ppc_md.get_random_seed == powernv_get_random_long) {
for_each_compatible_node(dn, NULL, "ibm,power-rng")
of_platform_device_create(dn, NULL, NULL);
}
return 0;
}
machine_subsys_initcall(powernv, pnv_rng_late_init);

5
arch/powerpc/sysdev/xive/spapr.c
Просмотреть файл

@ -15,6 +15,7 @@
#include <linux/of_fdt.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/bitmap.h>
#include <linux/cpumask.h>
#include <linux/mm.h>
#include <linux/delay.h>
@ -57,7 +58,7 @@ static int __init xive_irq_bitmap_add(int base, int count)
spin_lock_init(&xibm->lock);
xibm->base = base;
xibm->count = count;
xibm->bitmap = kzalloc(xibm->count, GFP_KERNEL);
xibm->bitmap = bitmap_zalloc(xibm->count, GFP_KERNEL);
if (!xibm->bitmap) {
kfree(xibm);
return -ENOMEM;
@ -75,7 +76,7 @@ static void xive_irq_bitmap_remove_all(void)
list_for_each_entry_safe(xibm, tmp, &xive_irq_bitmaps, list) {
list_del(&xibm->list);
kfree(xibm->bitmap);
bitmap_free(xibm->bitmap);
kfree(xibm);
}
}

2
arch/riscv/Kconfig
Просмотреть файл

@ -38,7 +38,7 @@ config RISCV
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_DEBUG_PAGEALLOC if MMU
select ARCH_SUPPORTS_HUGETLBFS if MMU
select ARCH_SUPPORTS_PAGE_TABLE_CHECK
select ARCH_SUPPORTS_PAGE_TABLE_CHECK if MMU
select ARCH_USE_MEMTEST
select ARCH_USE_QUEUED_RWLOCKS
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU

4
arch/riscv/boot/dts/microchip/mpfs.dtsi
Просмотреть файл

@ -50,6 +50,7 @@
riscv,isa = "rv64imafdc";
clocks = <&clkcfg CLK_CPU>;
tlb-split;
next-level-cache = <&cctrllr>;
status = "okay";
cpu1_intc: interrupt-controller {
@ -77,6 +78,7 @@
riscv,isa = "rv64imafdc";
clocks = <&clkcfg CLK_CPU>;
tlb-split;
next-level-cache = <&cctrllr>;
status = "okay";
cpu2_intc: interrupt-controller {
@ -104,6 +106,7 @@
riscv,isa = "rv64imafdc";
clocks = <&clkcfg CLK_CPU>;
tlb-split;
next-level-cache = <&cctrllr>;
status = "okay";
cpu3_intc: interrupt-controller {
@ -131,6 +134,7 @@
riscv,isa = "rv64imafdc";
clocks = <&clkcfg CLK_CPU>;
tlb-split;
next-level-cache = <&cctrllr>;
status = "okay";
cpu4_intc: interrupt-controller {
#interrupt-cells = <1>;

3
arch/riscv/errata/sifive/errata.c
Просмотреть файл

@ -111,6 +111,7 @@ void __init_or_module sifive_errata_patch_func(struct alt_entry *begin,
cpu_apply_errata |= tmp;
}
}
if (cpu_apply_errata != cpu_req_errata)
if (stage != RISCV_ALTERNATIVES_MODULE &&
cpu_apply_errata != cpu_req_errata)
warn_miss_errata(cpu_req_errata - cpu_apply_errata);
}

12
arch/riscv/include/asm/pgtable-64.h
Просмотреть файл

@ -175,7 +175,7 @@ static inline pud_t pfn_pud(unsigned long pfn, pgprot_t prot)
static inline unsigned long _pud_pfn(pud_t pud)
{
return pud_val(pud) >> _PAGE_PFN_SHIFT;
return __page_val_to_pfn(pud_val(pud));
}
static inline pmd_t *pud_pgtable(pud_t pud)
@ -278,13 +278,13 @@ static inline p4d_t pfn_p4d(unsigned long pfn, pgprot_t prot)
static inline unsigned long _p4d_pfn(p4d_t p4d)
{
return p4d_val(p4d) >> _PAGE_PFN_SHIFT;
return __page_val_to_pfn(p4d_val(p4d));
}
static inline pud_t *p4d_pgtable(p4d_t p4d)
{
if (pgtable_l4_enabled)
return (pud_t *)pfn_to_virt(p4d_val(p4d) >> _PAGE_PFN_SHIFT);
return (pud_t *)pfn_to_virt(__page_val_to_pfn(p4d_val(p4d)));
return (pud_t *)pud_pgtable((pud_t) { p4d_val(p4d) });
}
@ -292,7 +292,7 @@ static inline pud_t *p4d_pgtable(p4d_t p4d)
static inline struct page *p4d_page(p4d_t p4d)
{
return pfn_to_page(p4d_val(p4d) >> _PAGE_PFN_SHIFT);
return pfn_to_page(__page_val_to_pfn(p4d_val(p4d)));
}
#define pud_index(addr) (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
@ -347,7 +347,7 @@ static inline void pgd_clear(pgd_t *pgd)
static inline p4d_t *pgd_pgtable(pgd_t pgd)
{
if (pgtable_l5_enabled)
return (p4d_t *)pfn_to_virt(pgd_val(pgd) >> _PAGE_PFN_SHIFT);
return (p4d_t *)pfn_to_virt(__page_val_to_pfn(pgd_val(pgd)));
return (p4d_t *)p4d_pgtable((p4d_t) { pgd_val(pgd) });
}
@ -355,7 +355,7 @@ static inline p4d_t *pgd_pgtable(pgd_t pgd)
static inline struct page *pgd_page(pgd_t pgd)
{
return pfn_to_page(pgd_val(pgd) >> _PAGE_PFN_SHIFT);
return pfn_to_page(__page_val_to_pfn(pgd_val(pgd)));
}
#define pgd_page(pgd) pgd_page(pgd)

6
arch/riscv/include/asm/pgtable.h
Просмотреть файл

@ -261,7 +261,7 @@ static inline pgd_t pfn_pgd(unsigned long pfn, pgprot_t prot)
static inline unsigned long _pgd_pfn(pgd_t pgd)
{
return pgd_val(pgd) >> _PAGE_PFN_SHIFT;
return __page_val_to_pfn(pgd_val(pgd));
}
static inline struct page *pmd_page(pmd_t pmd)
@ -590,14 +590,14 @@ static inline pmd_t pmd_mkinvalid(pmd_t pmd)
return __pmd(pmd_val(pmd) & ~(_PAGE_PRESENT|_PAGE_PROT_NONE));
}
#define __pmd_to_phys(pmd) (pmd_val(pmd) >> _PAGE_PFN_SHIFT << PAGE_SHIFT)
#define __pmd_to_phys(pmd) (__page_val_to_pfn(pmd_val(pmd)) << PAGE_SHIFT)
static inline unsigned long pmd_pfn(pmd_t pmd)
{
return ((__pmd_to_phys(pmd) & PMD_MASK) >> PAGE_SHIFT);
}
#define __pud_to_phys(pud) (pud_val(pud) >> _PAGE_PFN_SHIFT << PAGE_SHIFT)
#define __pud_to_phys(pud) (__page_val_to_pfn(pud_val(pud)) << PAGE_SHIFT)
static inline unsigned long pud_pfn(pud_t pud)
{

2
arch/riscv/kvm/mmu.c
Просмотреть файл

@ -54,7 +54,7 @@ static inline unsigned long gstage_pte_index(gpa_t addr, u32 level)
static inline unsigned long gstage_pte_page_vaddr(pte_t pte)
{
return (unsigned long)pfn_to_virt(pte_val(pte) >> _PAGE_PFN_SHIFT);
return (unsigned long)pfn_to_virt(__page_val_to_pfn(pte_val(pte)));
}
static int gstage_page_size_to_level(unsigned long page_size, u32 *out_level)

2
arch/riscv/kvm/vcpu.c
Просмотреть файл

@ -781,9 +781,11 @@ static void kvm_riscv_check_vcpu_requests(struct kvm_vcpu *vcpu)
if (kvm_request_pending(vcpu)) {
if (kvm_check_request(KVM_REQ_SLEEP, vcpu)) {
kvm_vcpu_srcu_read_unlock(vcpu);
rcuwait_wait_event(wait,
(!vcpu->arch.power_off) && (!vcpu->arch.pause),
TASK_INTERRUPTIBLE);
kvm_vcpu_srcu_read_lock(vcpu);
if (vcpu->arch.power_off || vcpu->arch.pause) {
/*

1
arch/s390/Kconfig
Просмотреть файл

@ -484,7 +484,6 @@ config KEXEC
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select BUILD_BIN2C
depends on CRYPTO
depends on CRYPTO_SHA256
depends on CRYPTO_SHA256_S390

8
arch/s390/Makefile
Просмотреть файл

@ -82,7 +82,7 @@ endif
ifdef CONFIG_EXPOLINE
ifdef CONFIG_EXPOLINE_EXTERN
KBUILD_LDFLAGS_MODULE += arch/s390/lib/expoline.o
KBUILD_LDFLAGS_MODULE += arch/s390/lib/expoline/expoline.o
CC_FLAGS_EXPOLINE := -mindirect-branch=thunk-extern
CC_FLAGS_EXPOLINE += -mfunction-return=thunk-extern
else
@ -163,6 +163,12 @@ vdso_prepare: prepare0
$(Q)$(MAKE) $(build)=arch/s390/kernel/vdso64 include/generated/vdso64-offsets.h
$(if $(CONFIG_COMPAT),$(Q)$(MAKE) \
$(build)=arch/s390/kernel/vdso32 include/generated/vdso32-offsets.h)
ifdef CONFIG_EXPOLINE_EXTERN
modules_prepare: expoline_prepare
expoline_prepare:
$(Q)$(MAKE) $(build)=arch/s390/lib/expoline arch/s390/lib/expoline/expoline.o
endif
endif
# Don't use tabs in echo arguments

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше