Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25
This commit is contained in:
Paul Mackerras
Коммит
dcb571be20
|
|
@ -28,3 +28,6 @@ sound.txt
|
||||||
- info on sound support under Linux/PPC
|
- info on sound support under Linux/PPC
|
||||||
zImage_layout.txt
|
zImage_layout.txt
|
||||||
- info on the kernel images for Linux/PPC
|
- info on the kernel images for Linux/PPC
|
||||||
|
qe_firmware.txt
|
||||||
|
- describes the layout of firmware binaries for the Freescale QUICC
|
||||||
|
Engine and the code that parses and uploads the microcode therein.
|
||||||
|
|
|
||||||
|
|
@ -52,7 +52,11 @@ Table of Contents
|
||||||
i) Freescale QUICC Engine module (QE)
|
i) Freescale QUICC Engine module (QE)
|
||||||
j) CFI or JEDEC memory-mapped NOR flash
|
j) CFI or JEDEC memory-mapped NOR flash
|
||||||
k) Global Utilities Block
|
k) Global Utilities Block
|
||||||
l) Xilinx IP cores
|
l) Freescale Communications Processor Module
|
||||||
|
m) Chipselect/Local Bus
|
||||||
|
n) 4xx/Axon EMAC ethernet nodes
|
||||||
|
o) Xilinx IP cores
|
||||||
|
p) Freescale Synchronous Serial Interface
|
||||||
|
|
||||||
VII - Specifying interrupt information for devices
|
VII - Specifying interrupt information for devices
|
||||||
1) interrupts property
|
1) interrupts property
|
||||||
|
|
@ -1257,6 +1261,10 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
services interrupts for this device.
|
services interrupts for this device.
|
||||||
- phy-handle : The phandle for the PHY connected to this ethernet
|
- phy-handle : The phandle for the PHY connected to this ethernet
|
||||||
controller.
|
controller.
|
||||||
|
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
|
||||||
|
but unique to the all specified fixed-links, b is duplex - 0 half,
|
||||||
|
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
|
||||||
|
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
|
||||||
|
|
||||||
Recommended properties:
|
Recommended properties:
|
||||||
|
|
||||||
|
|
@ -1411,7 +1419,6 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
|
|
||||||
Example multi port host USB controller device node :
|
Example multi port host USB controller device node :
|
||||||
usb@22000 {
|
usb@22000 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "fsl-usb2-mph";
|
compatible = "fsl-usb2-mph";
|
||||||
reg = <22000 1000>;
|
reg = <22000 1000>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
|
|
@ -1425,7 +1432,6 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
|
|
||||||
Example dual role USB controller device node :
|
Example dual role USB controller device node :
|
||||||
usb@23000 {
|
usb@23000 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "fsl-usb2-dr";
|
compatible = "fsl-usb2-dr";
|
||||||
reg = <23000 1000>;
|
reg = <23000 1000>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
|
|
@ -1589,7 +1595,6 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
iii) USB (Universal Serial Bus Controller)
|
iii) USB (Universal Serial Bus Controller)
|
||||||
|
|
||||||
Required properties:
|
Required properties:
|
||||||
- device_type : should be "usb".
|
|
||||||
- compatible : could be "qe_udc" or "fhci-hcd".
|
- compatible : could be "qe_udc" or "fhci-hcd".
|
||||||
- mode : the could be "host" or "slave".
|
- mode : the could be "host" or "slave".
|
||||||
- reg : Offset and length of the register set for the device
|
- reg : Offset and length of the register set for the device
|
||||||
|
|
@ -1603,7 +1608,6 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
|
|
||||||
Example(slave):
|
Example(slave):
|
||||||
usb@6c0 {
|
usb@6c0 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "qe_udc";
|
compatible = "qe_udc";
|
||||||
reg = <6c0 40>;
|
reg = <6c0 40>;
|
||||||
interrupts = <8b 0>;
|
interrupts = <8b 0>;
|
||||||
|
|
@ -1616,7 +1620,7 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
|
|
||||||
Required properties:
|
Required properties:
|
||||||
- device_type : should be "network", "hldc", "uart", "transparent"
|
- device_type : should be "network", "hldc", "uart", "transparent"
|
||||||
"bisync" or "atm".
|
"bisync", "atm", or "serial".
|
||||||
- compatible : could be "ucc_geth" or "fsl_atm" and so on.
|
- compatible : could be "ucc_geth" or "fsl_atm" and so on.
|
||||||
- model : should be "UCC".
|
- model : should be "UCC".
|
||||||
- device-id : the ucc number(1-8), corresponding to UCCx in UM.
|
- device-id : the ucc number(1-8), corresponding to UCCx in UM.
|
||||||
|
|
@ -1629,6 +1633,13 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
- interrupt-parent : the phandle for the interrupt controller that
|
- interrupt-parent : the phandle for the interrupt controller that
|
||||||
services interrupts for this device.
|
services interrupts for this device.
|
||||||
- pio-handle : The phandle for the Parallel I/O port configuration.
|
- pio-handle : The phandle for the Parallel I/O port configuration.
|
||||||
|
- port-number : for UART drivers, the port number to use, between 0 and 3.
|
||||||
|
This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0.
|
||||||
|
The port number is added to the minor number of the device. Unlike the
|
||||||
|
CPM UART driver, the port-number is required for the QE UART driver.
|
||||||
|
- soft-uart : for UART drivers, if specified this means the QE UART device
|
||||||
|
driver should use "Soft-UART" mode, which is needed on some SOCs that have
|
||||||
|
broken UART hardware. Soft-UART is provided via a microcode upload.
|
||||||
- rx-clock-name: the UCC receive clock source
|
- rx-clock-name: the UCC receive clock source
|
||||||
"none": clock source is disabled
|
"none": clock source is disabled
|
||||||
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
|
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
|
||||||
|
|
@ -1788,6 +1799,32 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
viii) Uploaded QE firmware
|
||||||
|
|
||||||
|
If a new firwmare has been uploaded to the QE (usually by the
|
||||||
|
boot loader), then a 'firmware' child node should be added to the QE
|
||||||
|
node. This node provides information on the uploaded firmware that
|
||||||
|
device drivers may need.
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- id: The string name of the firmware. This is taken from the 'id'
|
||||||
|
member of the qe_firmware structure of the uploaded firmware.
|
||||||
|
Device drivers can search this string to determine if the
|
||||||
|
firmware they want is already present.
|
||||||
|
- extended-modes: The Extended Modes bitfield, taken from the
|
||||||
|
firmware binary. It is a 64-bit number represented
|
||||||
|
as an array of two 32-bit numbers.
|
||||||
|
- virtual-traps: The virtual traps, taken from the firmware binary.
|
||||||
|
It is an array of 8 32-bit numbers.
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
firmware {
|
||||||
|
id = "Soft-UART";
|
||||||
|
extended-modes = <0 0>;
|
||||||
|
virtual-traps = <0 0 0 0 0 0 0 0>;
|
||||||
|
}
|
||||||
|
|
||||||
j) CFI or JEDEC memory-mapped NOR flash
|
j) CFI or JEDEC memory-mapped NOR flash
|
||||||
|
|
||||||
Flash chips (Memory Technology Devices) are often used for solid state
|
Flash chips (Memory Technology Devices) are often used for solid state
|
||||||
|
|
@ -2269,7 +2306,7 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
available.
|
available.
|
||||||
For Axon: 0x0000012a
|
For Axon: 0x0000012a
|
||||||
|
|
||||||
l) Xilinx IP cores
|
o) Xilinx IP cores
|
||||||
|
|
||||||
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
|
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
|
||||||
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
|
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
|
||||||
|
|
@ -2539,6 +2576,46 @@ platforms are moved over to use the flattened-device-tree model.
|
||||||
Requred properties:
|
Requred properties:
|
||||||
- current-speed : Baud rate of uartlite
|
- current-speed : Baud rate of uartlite
|
||||||
|
|
||||||
|
p) Freescale Synchronous Serial Interface
|
||||||
|
|
||||||
|
The SSI is a serial device that communicates with audio codecs. It can
|
||||||
|
be programmed in AC97, I2S, left-justified, or right-justified modes.
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible : compatible list, containing "fsl,ssi"
|
||||||
|
- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on
|
||||||
|
- reg : offset and length of the register set for the device
|
||||||
|
- interrupts : <a b> where a is the interrupt number and b is a
|
||||||
|
field that represents an encoding of the sense and
|
||||||
|
level information for the interrupt. This should be
|
||||||
|
encoded based on the information in section 2)
|
||||||
|
depending on the type of interrupt controller you
|
||||||
|
have.
|
||||||
|
- interrupt-parent : the phandle for the interrupt controller that
|
||||||
|
services interrupts for this device.
|
||||||
|
- fsl,mode : the operating mode for the SSI interface
|
||||||
|
"i2s-slave" - I2S mode, SSI is clock slave
|
||||||
|
"i2s-master" - I2S mode, SSI is clock master
|
||||||
|
"lj-slave" - left-justified mode, SSI is clock slave
|
||||||
|
"lj-master" - l.j. mode, SSI is clock master
|
||||||
|
"rj-slave" - right-justified mode, SSI is clock slave
|
||||||
|
"rj-master" - r.j., SSI is clock master
|
||||||
|
"ac97-slave" - AC97 mode, SSI is clock slave
|
||||||
|
"ac97-master" - AC97 mode, SSI is clock master
|
||||||
|
|
||||||
|
Optional properties:
|
||||||
|
- codec-handle : phandle to a 'codec' node that defines an audio
|
||||||
|
codec connected to this SSI. This node is typically
|
||||||
|
a child of an I2C or other control node.
|
||||||
|
|
||||||
|
Child 'codec' node required properties:
|
||||||
|
- compatible : compatible list, contains the name of the codec
|
||||||
|
|
||||||
|
Child 'codec' node optional properties:
|
||||||
|
- clock-frequency : The frequency of the input clock, which typically
|
||||||
|
comes from an on-board dedicated oscillator.
|
||||||
|
|
||||||
|
|
||||||
More devices will be defined as this spec matures.
|
More devices will be defined as this spec matures.
|
||||||
|
|
||||||
VII - Specifying interrupt information for devices
|
VII - Specifying interrupt information for devices
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,295 @@
|
||||||
|
Freescale QUICC Engine Firmware Uploading
|
||||||
|
-----------------------------------------
|
||||||
|
|
||||||
|
(c) 2007 Timur Tabi <timur at freescale.com>,
|
||||||
|
Freescale Semiconductor
|
||||||
|
|
||||||
|
Table of Contents
|
||||||
|
=================
|
||||||
|
|
||||||
|
I - Software License for Firmware
|
||||||
|
|
||||||
|
II - Microcode Availability
|
||||||
|
|
||||||
|
III - Description and Terminology
|
||||||
|
|
||||||
|
IV - Microcode Programming Details
|
||||||
|
|
||||||
|
V - Firmware Structure Layout
|
||||||
|
|
||||||
|
VI - Sample Code for Creating Firmware Files
|
||||||
|
|
||||||
|
Revision Information
|
||||||
|
====================
|
||||||
|
|
||||||
|
November 30, 2007: Rev 1.0 - Initial version
|
||||||
|
|
||||||
|
I - Software License for Firmware
|
||||||
|
=================================
|
||||||
|
|
||||||
|
Each firmware file comes with its own software license. For information on
|
||||||
|
the particular license, please see the license text that is distributed with
|
||||||
|
the firmware.
|
||||||
|
|
||||||
|
II - Microcode Availability
|
||||||
|
===========================
|
||||||
|
|
||||||
|
Firmware files are distributed through various channels. Some are available on
|
||||||
|
http://opensource.freescale.com. For other firmware files, please contact
|
||||||
|
your Freescale representative or your operating system vendor.
|
||||||
|
|
||||||
|
III - Description and Terminology
|
||||||
|
================================
|
||||||
|
|
||||||
|
In this document, the term 'microcode' refers to the sequence of 32-bit
|
||||||
|
integers that compose the actual QE microcode.
|
||||||
|
|
||||||
|
The term 'firmware' refers to a binary blob that contains the microcode as
|
||||||
|
well as other data that
|
||||||
|
|
||||||
|
1) describes the microcode's purpose
|
||||||
|
2) describes how and where to upload the microcode
|
||||||
|
3) specifies the values of various registers
|
||||||
|
4) includes additional data for use by specific device drivers
|
||||||
|
|
||||||
|
Firmware files are binary files that contain only a firmware.
|
||||||
|
|
||||||
|
IV - Microcode Programming Details
|
||||||
|
===================================
|
||||||
|
|
||||||
|
The QE architecture allows for only one microcode present in I-RAM for each
|
||||||
|
RISC processor. To replace any current microcode, a full QE reset (which
|
||||||
|
disables the microcode) must be performed first.
|
||||||
|
|
||||||
|
QE microcode is uploaded using the following procedure:
|
||||||
|
|
||||||
|
1) The microcode is placed into I-RAM at a specific location, using the
|
||||||
|
IRAM.IADD and IRAM.IDATA registers.
|
||||||
|
|
||||||
|
2) The CERCR.CIR bit is set to 0 or 1, depending on whether the firmware
|
||||||
|
needs split I-RAM. Split I-RAM is only meaningful for SOCs that have
|
||||||
|
QEs with multiple RISC processors, such as the 8360. Splitting the I-RAM
|
||||||
|
allows each processor to run a different microcode, effectively creating an
|
||||||
|
asymmetric multiprocessing (AMP) system.
|
||||||
|
|
||||||
|
3) The TIBCR trap registers are loaded with the addresses of the trap handlers
|
||||||
|
in the microcode.
|
||||||
|
|
||||||
|
4) The RSP.ECCR register is programmed with the value provided.
|
||||||
|
|
||||||
|
5) If necessary, device drivers that need the virtual traps and extended mode
|
||||||
|
data will use them.
|
||||||
|
|
||||||
|
Virtual Microcode Traps
|
||||||
|
|
||||||
|
These virtual traps are conditional branches in the microcode. These are
|
||||||
|
"soft" provisional introduced in the ROMcode in order to enable higher
|
||||||
|
flexibility and save h/w traps If new features are activated or an issue is
|
||||||
|
being fixed in the RAM package utilizing they should be activated. This data
|
||||||
|
structure signals the microcode which of these virtual traps is active.
|
||||||
|
|
||||||
|
This structure contains 6 words that the application should copy to some
|
||||||
|
specific been defined. This table describes the structure.
|
||||||
|
|
||||||
|
---------------------------------------------------------------
|
||||||
|
| Offset in | | Destination Offset | Size of |
|
||||||
|
| array | Protocol | within PRAM | Operand |
|
||||||
|
--------------------------------------------------------------|
|
||||||
|
| 0 | Ethernet | 0xF8 | 4 bytes |
|
||||||
|
| | interworking | | |
|
||||||
|
---------------------------------------------------------------
|
||||||
|
| 4 | ATM | 0xF8 | 4 bytes |
|
||||||
|
| | interworking | | |
|
||||||
|
---------------------------------------------------------------
|
||||||
|
| 8 | PPP | 0xF8 | 4 bytes |
|
||||||
|
| | interworking | | |
|
||||||
|
---------------------------------------------------------------
|
||||||
|
| 12 | Ethernet RX | 0x22 | 1 byte |
|
||||||
|
| | Distributor Page | | |
|
||||||
|
---------------------------------------------------------------
|
||||||
|
| 16 | ATM Globtal | 0x28 | 1 byte |
|
||||||
|
| | Params Table | | |
|
||||||
|
---------------------------------------------------------------
|
||||||
|
| 20 | Insert Frame | 0xF8 | 4 bytes |
|
||||||
|
---------------------------------------------------------------
|
||||||
|
|
||||||
|
|
||||||
|
Extended Modes
|
||||||
|
|
||||||
|
This is a double word bit array (64 bits) that defines special functionality
|
||||||
|
which has an impact on the softwarew drivers. Each bit has its own impact
|
||||||
|
and has special instructions for the s/w associated with it. This structure is
|
||||||
|
described in this table:
|
||||||
|
|
||||||
|
-----------------------------------------------------------------------
|
||||||
|
| Bit # | Name | Description |
|
||||||
|
-----------------------------------------------------------------------
|
||||||
|
| 0 | General | Indicates that prior to each host command |
|
||||||
|
| | push command | given by the application, the software must |
|
||||||
|
| | | assert a special host command (push command)|
|
||||||
|
| | | CECDR = 0x00800000. |
|
||||||
|
| | | CECR = 0x01c1000f. |
|
||||||
|
-----------------------------------------------------------------------
|
||||||
|
| 1 | UCC ATM | Indicates that after issuing ATM RX INIT |
|
||||||
|
| | RX INIT | command, the host must issue another special|
|
||||||
|
| | push command | command (push command) and immediately |
|
||||||
|
| | | following that re-issue the ATM RX INIT |
|
||||||
|
| | | command. (This makes the sequence of |
|
||||||
|
| | | initializing the ATM receiver a sequence of |
|
||||||
|
| | | three host commands) |
|
||||||
|
| | | CECDR = 0x00800000. |
|
||||||
|
| | | CECR = 0x01c1000f. |
|
||||||
|
-----------------------------------------------------------------------
|
||||||
|
| 2 | Add/remove | Indicates that following the specific host |
|
||||||
|
| | command | command: "Add/Remove entry in Hash Lookup |
|
||||||
|
| | validation | Table" used in Interworking setup, the user |
|
||||||
|
| | | must issue another command. |
|
||||||
|
| | | CECDR = 0xce000003. |
|
||||||
|
| | | CECR = 0x01c10f58. |
|
||||||
|
-----------------------------------------------------------------------
|
||||||
|
| 3 | General push | Indicates that the s/w has to initialize |
|
||||||
|
| | command | some pointers in the Ethernet thread pages |
|
||||||
|
| | | which are used when Header Compression is |
|
||||||
|
| | | activated. The full details of these |
|
||||||
|
| | | pointers is located in the software drivers.|
|
||||||
|
-----------------------------------------------------------------------
|
||||||
|
| 4 | General push | Indicates that after issuing Ethernet TX |
|
||||||
|
| | command | INIT command, user must issue this command |
|
||||||
|
| | | for each SNUM of Ethernet TX thread. |
|
||||||
|
| | | CECDR = 0x00800003. |
|
||||||
|
| | | CECR = 0x7'b{0}, 8'b{Enet TX thread SNUM}, |
|
||||||
|
| | | 1'b{1}, 12'b{0}, 4'b{1} |
|
||||||
|
-----------------------------------------------------------------------
|
||||||
|
| 5 - 31 | N/A | Reserved, set to zero. |
|
||||||
|
-----------------------------------------------------------------------
|
||||||
|
|
||||||
|
V - Firmware Structure Layout
|
||||||
|
==============================
|
||||||
|
|
||||||
|
QE microcode from Freescale is typically provided as a header file. This
|
||||||
|
header file contains macros that define the microcode binary itself as well as
|
||||||
|
some other data used in uploading that microcode. The format of these files
|
||||||
|
do not lend themselves to simple inclusion into other code. Hence,
|
||||||
|
the need for a more portable format. This section defines that format.
|
||||||
|
|
||||||
|
Instead of distributing a header file, the microcode and related data are
|
||||||
|
embedded into a binary blob. This blob is passed to the qe_upload_firmware()
|
||||||
|
function, which parses the blob and performs everything necessary to upload
|
||||||
|
the microcode.
|
||||||
|
|
||||||
|
All integers are big-endian. See the comments for function
|
||||||
|
qe_upload_firmware() for up-to-date implementation information.
|
||||||
|
|
||||||
|
This structure supports versioning, where the version of the structure is
|
||||||
|
embedded into the structure itself. To ensure forward and backwards
|
||||||
|
compatibility, all versions of the structure must use the same 'qe_header'
|
||||||
|
structure at the beginning.
|
||||||
|
|
||||||
|
'header' (type: struct qe_header):
|
||||||
|
The 'length' field is the size, in bytes, of the entire structure,
|
||||||
|
including all the microcode embedded in it, as well as the CRC (if
|
||||||
|
present).
|
||||||
|
|
||||||
|
The 'magic' field is an array of three bytes that contains the letters
|
||||||
|
'Q', 'E', and 'F'. This is an identifier that indicates that this
|
||||||
|
structure is a QE Firmware structure.
|
||||||
|
|
||||||
|
The 'version' field is a single byte that indicates the version of this
|
||||||
|
structure. If the layout of the structure should ever need to be
|
||||||
|
changed to add support for additional types of microcode, then the
|
||||||
|
version number should also be changed.
|
||||||
|
|
||||||
|
The 'id' field is a null-terminated string(suitable for printing) that
|
||||||
|
identifies the firmware.
|
||||||
|
|
||||||
|
The 'count' field indicates the number of 'microcode' structures. There
|
||||||
|
must be one and only one 'microcode' structure for each RISC processor.
|
||||||
|
Therefore, this field also represents the number of RISC processors for this
|
||||||
|
SOC.
|
||||||
|
|
||||||
|
The 'soc' structure contains the SOC numbers and revisions used to match
|
||||||
|
the microcode to the SOC itself. Normally, the microcode loader should
|
||||||
|
check the data in this structure with the SOC number and revisions, and
|
||||||
|
only upload the microcode if there's a match. However, this check is not
|
||||||
|
made on all platforms.
|
||||||
|
|
||||||
|
Although it is not recommended, you can specify '0' in the soc.model
|
||||||
|
field to skip matching SOCs altogether.
|
||||||
|
|
||||||
|
The 'model' field is a 16-bit number that matches the actual SOC. The
|
||||||
|
'major' and 'minor' fields are the major and minor revision numbrs,
|
||||||
|
respectively, of the SOC.
|
||||||
|
|
||||||
|
For example, to match the 8323, revision 1.0:
|
||||||
|
soc.model = 8323
|
||||||
|
soc.major = 1
|
||||||
|
soc.minor = 0
|
||||||
|
|
||||||
|
'padding' is neccessary for structure alignment. This field ensures that the
|
||||||
|
'extended_modes' field is aligned on a 64-bit boundary.
|
||||||
|
|
||||||
|
'extended_modes' is a bitfield that defines special functionality which has an
|
||||||
|
impact on the device drivers. Each bit has its own impact and has special
|
||||||
|
instructions for the driver associated with it. This field is stored in
|
||||||
|
the QE library and available to any driver that calles qe_get_firmware_info().
|
||||||
|
|
||||||
|
'vtraps' is an array of 8 words that contain virtual trap values for each
|
||||||
|
virtual traps. As with 'extended_modes', this field is stored in the QE
|
||||||
|
library and available to any driver that calles qe_get_firmware_info().
|
||||||
|
|
||||||
|
'microcode' (type: struct qe_microcode):
|
||||||
|
For each RISC processor there is one 'microcode' structure. The first
|
||||||
|
'microcode' structure is for the first RISC, and so on.
|
||||||
|
|
||||||
|
The 'id' field is a null-terminated string suitable for printing that
|
||||||
|
identifies this particular microcode.
|
||||||
|
|
||||||
|
'traps' is an array of 16 words that contain hardware trap values
|
||||||
|
for each of the 16 traps. If trap[i] is 0, then this particular
|
||||||
|
trap is to be ignored (i.e. not written to TIBCR[i]). The entire value
|
||||||
|
is written as-is to the TIBCR[i] register, so be sure to set the EN
|
||||||
|
and T_IBP bits if necessary.
|
||||||
|
|
||||||
|
'eccr' is the value to program into the ECCR register.
|
||||||
|
|
||||||
|
'iram_offset' is the offset into IRAM to start writing the
|
||||||
|
microcode.
|
||||||
|
|
||||||
|
'count' is the number of 32-bit words in the microcode.
|
||||||
|
|
||||||
|
'code_offset' is the offset, in bytes, from the beginning of this
|
||||||
|
structure where the microcode itself can be found. The first
|
||||||
|
microcode binary should be located immediately after the 'microcode'
|
||||||
|
array.
|
||||||
|
|
||||||
|
'major', 'minor', and 'revision' are the major, minor, and revision
|
||||||
|
version numbers, respectively, of the microcode. If all values are 0,
|
||||||
|
then these fields are ignored.
|
||||||
|
|
||||||
|
'reserved' is necessary for structure alignment. Since 'microcode'
|
||||||
|
is an array, the 64-bit 'extended_modes' field needs to be aligned
|
||||||
|
on a 64-bit boundary, and this can only happen if the size of
|
||||||
|
'microcode' is a multiple of 8 bytes. To ensure that, we add
|
||||||
|
'reserved'.
|
||||||
|
|
||||||
|
After the last microcode is a 32-bit CRC. It can be calculated using
|
||||||
|
this algorithm:
|
||||||
|
|
||||||
|
u32 crc32(const u8 *p, unsigned int len)
|
||||||
|
{
|
||||||
|
unsigned int i;
|
||||||
|
u32 crc = 0;
|
||||||
|
|
||||||
|
while (len--) {
|
||||||
|
crc ^= *p++;
|
||||||
|
for (i = 0; i < 8; i++)
|
||||||
|
crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
|
||||||
|
}
|
||||||
|
return crc;
|
||||||
|
}
|
||||||
|
|
||||||
|
VI - Sample Code for Creating Firmware Files
|
||||||
|
============================================
|
||||||
|
|
||||||
|
A Python program that creates firmware binaries from the header files normally
|
||||||
|
distributed by Freescale can be found on http://opensource.freescale.com.
|
||||||
|
|
@ -140,6 +140,9 @@ config DEFAULT_UIMAGE
|
||||||
Used to allow a board to specify it wants a uImage built by default
|
Used to allow a board to specify it wants a uImage built by default
|
||||||
default n
|
default n
|
||||||
|
|
||||||
|
config REDBOOT
|
||||||
|
bool
|
||||||
|
|
||||||
config PPC64_SWSUSP
|
config PPC64_SWSUSP
|
||||||
bool
|
bool
|
||||||
depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL))
|
depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL))
|
||||||
|
|
|
||||||
|
|
@ -31,6 +31,7 @@ zImage.*lds
|
||||||
zImage.miboot
|
zImage.miboot
|
||||||
zImage.pmac
|
zImage.pmac
|
||||||
zImage.pseries
|
zImage.pseries
|
||||||
|
zImage.redboot*
|
||||||
zImage.sandpoint
|
zImage.sandpoint
|
||||||
zImage.vmode
|
zImage.vmode
|
||||||
zconf.h
|
zconf.h
|
||||||
|
|
|
||||||
|
|
@ -57,12 +57,12 @@ src-wlib := string.S crt0.S stdio.c main.c \
|
||||||
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
|
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
|
||||||
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
|
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
|
||||||
fsl-soc.c mpc8xx.c pq2.c
|
fsl-soc.c mpc8xx.c pq2.c
|
||||||
src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \
|
src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
|
||||||
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
|
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
|
||||||
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
|
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
|
||||||
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
|
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
|
||||||
fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \
|
fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \
|
||||||
cuboot-katmai.c cuboot-rainier.c
|
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c
|
||||||
src-boot := $(src-wlib) $(src-plat) empty.c
|
src-boot := $(src-wlib) $(src-plat) empty.c
|
||||||
|
|
||||||
src-boot := $(addprefix $(obj)/, $(src-boot))
|
src-boot := $(addprefix $(obj)/, $(src-boot))
|
||||||
|
|
@ -195,7 +195,9 @@ image-$(CONFIG_PPC_8xx) += cuImage.8xx
|
||||||
image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc
|
image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc
|
||||||
image-$(CONFIG_EP405) += zImage.ep405
|
image-$(CONFIG_EP405) += zImage.ep405
|
||||||
image-$(CONFIG_8260) += cuImage.pq2
|
image-$(CONFIG_8260) += cuImage.pq2
|
||||||
|
image-$(CONFIG_EP8248E) += zImage.ep8248e
|
||||||
image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx
|
image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx
|
||||||
|
image-$(CONFIG_STORCENTER) += cuImage.824x
|
||||||
image-$(CONFIG_PPC_83xx) += cuImage.83xx
|
image-$(CONFIG_PPC_83xx) += cuImage.83xx
|
||||||
image-$(CONFIG_PPC_85xx) += cuImage.85xx
|
image-$(CONFIG_PPC_85xx) += cuImage.85xx
|
||||||
image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2
|
image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2
|
||||||
|
|
@ -208,6 +210,10 @@ image-$(CONFIG_TAISHAN) += cuImage.taishan
|
||||||
image-$(CONFIG_KATMAI) += cuImage.katmai
|
image-$(CONFIG_KATMAI) += cuImage.katmai
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
ifneq ($(CONFIG_REDBOOT),"")
|
||||||
|
image-$(CONFIG_PPC_8xx) += zImage.redboot-8xx
|
||||||
|
endif
|
||||||
|
|
||||||
# For 32-bit powermacs, build the COFF and miboot images
|
# For 32-bit powermacs, build the COFF and miboot images
|
||||||
# as well as the ELF images.
|
# as well as the ELF images.
|
||||||
ifeq ($(CONFIG_PPC32),y)
|
ifeq ($(CONFIG_PPC32),y)
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,53 @@
|
||||||
|
/*
|
||||||
|
* Old U-boot compatibility for 824x
|
||||||
|
*
|
||||||
|
* Copyright (c) 2007 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License version 2 as published
|
||||||
|
* by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "ops.h"
|
||||||
|
#include "stdio.h"
|
||||||
|
#include "cuboot.h"
|
||||||
|
|
||||||
|
#define TARGET_824x
|
||||||
|
#include "ppcboot.h"
|
||||||
|
|
||||||
|
static bd_t bd;
|
||||||
|
|
||||||
|
|
||||||
|
static void platform_fixups(void)
|
||||||
|
{
|
||||||
|
void *soc;
|
||||||
|
|
||||||
|
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
|
||||||
|
dt_fixup_mac_addresses(bd.bi_enetaddr);
|
||||||
|
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
|
||||||
|
|
||||||
|
soc = find_node_by_devtype(NULL, "soc");
|
||||||
|
if (soc) {
|
||||||
|
void *serial = NULL;
|
||||||
|
|
||||||
|
setprop(soc, "bus-frequency", &bd.bi_busfreq,
|
||||||
|
sizeof(bd.bi_busfreq));
|
||||||
|
|
||||||
|
while ((serial = find_node_by_devtype(serial, "serial"))) {
|
||||||
|
if (get_parent(serial) != soc)
|
||||||
|
continue;
|
||||||
|
|
||||||
|
setprop(serial, "clock-frequency", &bd.bi_busfreq,
|
||||||
|
sizeof(bd.bi_busfreq));
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||||
|
unsigned long r6, unsigned long r7)
|
||||||
|
{
|
||||||
|
CUBOOT_INIT();
|
||||||
|
fdt_init(_dtb_start);
|
||||||
|
serial_console_init();
|
||||||
|
platform_ops.fixups = platform_fixups;
|
||||||
|
}
|
||||||
|
|
@ -24,7 +24,8 @@ static void platform_fixups(void)
|
||||||
void *soc;
|
void *soc;
|
||||||
|
|
||||||
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
|
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
|
||||||
dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
|
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
|
||||||
|
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
|
||||||
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
|
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
|
||||||
|
|
||||||
/* Unfortunately, the specific model number is encoded in the
|
/* Unfortunately, the specific model number is encoded in the
|
||||||
|
|
|
||||||
|
|
@ -24,8 +24,9 @@ static void platform_fixups(void)
|
||||||
void *soc;
|
void *soc;
|
||||||
|
|
||||||
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
|
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
|
||||||
dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr,
|
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
|
||||||
bd.bi_enet2addr);
|
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
|
||||||
|
dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
|
||||||
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq);
|
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq);
|
||||||
|
|
||||||
/* Unfortunately, the specific model number is encoded in the
|
/* Unfortunately, the specific model number is encoded in the
|
||||||
|
|
|
||||||
|
|
@ -88,6 +88,20 @@ void dt_fixup_clock(const char *path, u32 freq)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr)
|
||||||
|
{
|
||||||
|
void *devp = find_node_by_alias(alias);
|
||||||
|
|
||||||
|
if (devp) {
|
||||||
|
printf("%s: local-mac-address <-"
|
||||||
|
" %02x:%02x:%02x:%02x:%02x:%02x\n\r", alias,
|
||||||
|
addr[0], addr[1], addr[2],
|
||||||
|
addr[3], addr[4], addr[5]);
|
||||||
|
|
||||||
|
setprop(devp, "local-mac-address", addr, 6);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
void dt_fixup_mac_address(u32 index, const u8 *addr)
|
void dt_fixup_mac_address(u32 index, const u8 *addr)
|
||||||
{
|
{
|
||||||
void *devp = find_node_by_prop_value(NULL, "linux,network-index",
|
void *devp = find_node_by_prop_value(NULL, "linux,network-index",
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,184 @@
|
||||||
|
/*
|
||||||
|
* Device Tree Source for MPC885 ADS running RedBoot
|
||||||
|
*
|
||||||
|
* Copyright 2006 MontaVista Software, Inc.
|
||||||
|
* Copyright 2007 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by the
|
||||||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
* option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
/ {
|
||||||
|
model = "Analogue & Micro Adder MPC875";
|
||||||
|
compatible = "analogue-and-micro,adder875";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
console = &console;
|
||||||
|
ethernet0 = ð0;
|
||||||
|
ethernet1 = ð1;
|
||||||
|
};
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PowerPC,875@0 {
|
||||||
|
device_type = "cpu";
|
||||||
|
reg = <0>;
|
||||||
|
d-cache-line-size = <16>;
|
||||||
|
i-cache-line-size = <16>;
|
||||||
|
d-cache-size = <8192>;
|
||||||
|
i-cache-size = <8192>;
|
||||||
|
timebase-frequency = <0>;
|
||||||
|
bus-frequency = <0>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
interrupts = <15 2>; // decrementer interrupt
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0 0x01000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
localbus@fa200100 {
|
||||||
|
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
|
||||||
|
"simple-bus";
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
reg = <0xfa200100 0x40>;
|
||||||
|
|
||||||
|
ranges = <
|
||||||
|
0 0 0xfe000000 0x00800000
|
||||||
|
2 0 0xfa100000 0x00008000
|
||||||
|
>;
|
||||||
|
|
||||||
|
flash@0,0 {
|
||||||
|
compatible = "cfi-flash";
|
||||||
|
reg = <0 0 0x800000>;
|
||||||
|
bank-width = <2>;
|
||||||
|
device-width = <2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
soc@fa200000 {
|
||||||
|
compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges = <0 0xfa200000 0x00004000>;
|
||||||
|
|
||||||
|
// Temporary until code stops depending on it.
|
||||||
|
device_type = "soc";
|
||||||
|
|
||||||
|
// Temporary until get_immrbase() is fixed.
|
||||||
|
reg = <0xfa200000 0x4000>;
|
||||||
|
|
||||||
|
mdio@e00 {
|
||||||
|
compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
|
||||||
|
reg = <0xe00 0x188>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PHY0: ethernet-phy@0 {
|
||||||
|
reg = <0>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
|
||||||
|
PHY1: ethernet-phy@1 {
|
||||||
|
reg = <1>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
eth0: ethernet@e00 {
|
||||||
|
device_type = "network";
|
||||||
|
compatible = "fsl,mpc875-fec-enet",
|
||||||
|
"fsl,pq1-fec-enet";
|
||||||
|
reg = <0xe00 0x188>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <3 1>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
phy-handle = <&PHY0>;
|
||||||
|
linux,network-index = <0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
eth1: ethernet@1e00 {
|
||||||
|
device_type = "network";
|
||||||
|
compatible = "fsl,mpc875-fec-enet",
|
||||||
|
"fsl,pq1-fec-enet";
|
||||||
|
reg = <0x1e00 0x188>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <7 1>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
phy-handle = <&PHY1>;
|
||||||
|
linux,network-index = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
PIC: interrupt-controller@0 {
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
reg = <0 0x24>;
|
||||||
|
compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
|
||||||
|
};
|
||||||
|
|
||||||
|
cpm@9c0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
|
||||||
|
interrupts = <0>; // cpm error interrupt
|
||||||
|
interrupt-parent = <&CPM_PIC>;
|
||||||
|
reg = <0x9c0 0x40>;
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
muram {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges = <0 0x2000 0x2000>;
|
||||||
|
|
||||||
|
data@0 {
|
||||||
|
compatible = "fsl,cpm-muram-data";
|
||||||
|
reg = <0 0x1c00>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
brg@9f0 {
|
||||||
|
compatible = "fsl,mpc875-brg",
|
||||||
|
"fsl,cpm1-brg",
|
||||||
|
"fsl,cpm-brg";
|
||||||
|
reg = <0x9f0 0x10>;
|
||||||
|
};
|
||||||
|
|
||||||
|
CPM_PIC: interrupt-controller@930 {
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
interrupts = <5 2 0 2>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
reg = <0x930 0x20>;
|
||||||
|
compatible = "fsl,mpc875-cpm-pic",
|
||||||
|
"fsl,cpm1-pic";
|
||||||
|
};
|
||||||
|
|
||||||
|
console: serial@a80 {
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "fsl,mpc875-smc-uart",
|
||||||
|
"fsl,cpm1-smc-uart";
|
||||||
|
reg = <0xa80 0x10 0x3e80 0x40>;
|
||||||
|
interrupts = <4>;
|
||||||
|
interrupt-parent = <&CPM_PIC>;
|
||||||
|
fsl,cpm-brg = <1>;
|
||||||
|
fsl,cpm-command = <0x0090>;
|
||||||
|
current-speed = <115200>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
linux,stdout-path = &console;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,183 @@
|
||||||
|
/*
|
||||||
|
* Device Tree Source for MPC885 ADS running U-Boot
|
||||||
|
*
|
||||||
|
* Copyright 2006 MontaVista Software, Inc.
|
||||||
|
* Copyright 2007 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by the
|
||||||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
* option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
/ {
|
||||||
|
model = "Analogue & Micro Adder MPC875";
|
||||||
|
compatible = "analogue-and-micro,adder875";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
console = &console;
|
||||||
|
ethernet0 = ð0;
|
||||||
|
ethernet1 = ð1;
|
||||||
|
};
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PowerPC,875@0 {
|
||||||
|
device_type = "cpu";
|
||||||
|
reg = <0>;
|
||||||
|
d-cache-line-size = <16>;
|
||||||
|
i-cache-line-size = <16>;
|
||||||
|
d-cache-size = <8192>;
|
||||||
|
i-cache-size = <8192>;
|
||||||
|
timebase-frequency = <0>;
|
||||||
|
bus-frequency = <0>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
interrupts = <15 2>; // decrementer interrupt
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0 0x01000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
localbus@ff000100 {
|
||||||
|
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
|
||||||
|
"simple-bus";
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
reg = <0xff000100 0x40>;
|
||||||
|
|
||||||
|
ranges = <
|
||||||
|
0 0 0xfe000000 0x01000000
|
||||||
|
>;
|
||||||
|
|
||||||
|
flash@0,0 {
|
||||||
|
compatible = "cfi-flash";
|
||||||
|
reg = <0 0 0x800000>;
|
||||||
|
bank-width = <2>;
|
||||||
|
device-width = <2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
soc@ff000000 {
|
||||||
|
compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges = <0 0xff000000 0x00004000>;
|
||||||
|
|
||||||
|
// Temporary until code stops depending on it.
|
||||||
|
device_type = "soc";
|
||||||
|
|
||||||
|
// Temporary until get_immrbase() is fixed.
|
||||||
|
reg = <0xff000000 0x4000>;
|
||||||
|
|
||||||
|
mdio@e00 {
|
||||||
|
compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
|
||||||
|
reg = <0xe00 0x188>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PHY0: ethernet-phy@0 {
|
||||||
|
reg = <0>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
|
||||||
|
PHY1: ethernet-phy@1 {
|
||||||
|
reg = <1>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
eth0: ethernet@e00 {
|
||||||
|
device_type = "network";
|
||||||
|
compatible = "fsl,mpc875-fec-enet",
|
||||||
|
"fsl,pq1-fec-enet";
|
||||||
|
reg = <0xe00 0x188>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <3 1>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
phy-handle = <&PHY0>;
|
||||||
|
linux,network-index = <0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
eth1: ethernet@1e00 {
|
||||||
|
device_type = "network";
|
||||||
|
compatible = "fsl,mpc875-fec-enet",
|
||||||
|
"fsl,pq1-fec-enet";
|
||||||
|
reg = <0x1e00 0x188>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <7 1>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
phy-handle = <&PHY1>;
|
||||||
|
linux,network-index = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
PIC: interrupt-controller@0 {
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
reg = <0 0x24>;
|
||||||
|
compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
|
||||||
|
};
|
||||||
|
|
||||||
|
cpm@9c0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
|
||||||
|
interrupts = <0>; // cpm error interrupt
|
||||||
|
interrupt-parent = <&CPM_PIC>;
|
||||||
|
reg = <0x9c0 0x40>;
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
muram {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges = <0 0x2000 0x2000>;
|
||||||
|
|
||||||
|
data@0 {
|
||||||
|
compatible = "fsl,cpm-muram-data";
|
||||||
|
reg = <0 0x1c00>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
brg@9f0 {
|
||||||
|
compatible = "fsl,mpc875-brg",
|
||||||
|
"fsl,cpm1-brg",
|
||||||
|
"fsl,cpm-brg";
|
||||||
|
reg = <0x9f0 0x10>;
|
||||||
|
};
|
||||||
|
|
||||||
|
CPM_PIC: interrupt-controller@930 {
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
interrupts = <5 2 0 2>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
reg = <0x930 0x20>;
|
||||||
|
compatible = "fsl,mpc875-cpm-pic",
|
||||||
|
"fsl,cpm1-pic";
|
||||||
|
};
|
||||||
|
|
||||||
|
console: serial@a80 {
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "fsl,mpc875-smc-uart",
|
||||||
|
"fsl,cpm1-smc-uart";
|
||||||
|
reg = <0xa80 0x10 0x3e80 0x40>;
|
||||||
|
interrupts = <4>;
|
||||||
|
interrupt-parent = <&CPM_PIC>;
|
||||||
|
fsl,cpm-brg = <1>;
|
||||||
|
fsl,cpm-command = <0x0090>;
|
||||||
|
current-speed = <115200>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
linux,stdout-path = &console;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,207 @@
|
||||||
|
/*
|
||||||
|
* Device Tree for the Embedded Planet EP8248E board running PlanetCore.
|
||||||
|
*
|
||||||
|
* Copyright 2007 Freescale Semiconductor Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by the
|
||||||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
* option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
/ {
|
||||||
|
model = "EP8248E";
|
||||||
|
compatible = "fsl,ep8248e";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
planetcore-SMC1 = &smc1;
|
||||||
|
planetcore-SCC1 = &scc1;
|
||||||
|
ethernet0 = ð0;
|
||||||
|
ethernet1 = ð1;
|
||||||
|
serial0 = &smc1;
|
||||||
|
serial1 = &scc1;
|
||||||
|
};
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PowerPC,8248@0 {
|
||||||
|
device_type = "cpu";
|
||||||
|
reg = <0>;
|
||||||
|
d-cache-line-size = <32>;
|
||||||
|
i-cache-line-size = <32>;
|
||||||
|
d-cache-size = <16384>;
|
||||||
|
i-cache-size = <16384>;
|
||||||
|
timebase-frequency = <0>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
localbus@f0010100 {
|
||||||
|
compatible = "fsl,mpc8248-localbus",
|
||||||
|
"fsl,pq2-localbus",
|
||||||
|
"simple-bus";
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
reg = <0xf0010100 0x40>;
|
||||||
|
|
||||||
|
ranges = <0 0 0xfc000000 0x04000000
|
||||||
|
1 0 0xfa000000 0x00008000>;
|
||||||
|
|
||||||
|
flash@0,3800000 {
|
||||||
|
compatible = "cfi-flash";
|
||||||
|
reg = <0 0x3800000 0x800000>;
|
||||||
|
bank-width = <4>;
|
||||||
|
device-width = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
bcsr@1,0 {
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
reg = <1 0 0x10>;
|
||||||
|
compatible = "fsl,ep8248e-bcsr";
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
mdio {
|
||||||
|
device_type = "mdio";
|
||||||
|
compatible = "fsl,ep8248e-mdio-bitbang";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
reg = <1 8 1>;
|
||||||
|
|
||||||
|
PHY0: ethernet-phy@0 {
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
reg = <0>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
|
||||||
|
PHY1: ethernet-phy@1 {
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
reg = <1>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0 0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
soc@f0000000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
|
||||||
|
ranges = <0x00000000 0xf0000000 0x00053000>;
|
||||||
|
|
||||||
|
// Temporary until code stops depending on it.
|
||||||
|
device_type = "soc";
|
||||||
|
|
||||||
|
// Temporary -- will go away once kernel uses ranges for get_immrbase().
|
||||||
|
reg = <0xf0000000 0x00053000>;
|
||||||
|
|
||||||
|
cpm@119c0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
|
||||||
|
"simple-bus";
|
||||||
|
reg = <0x119c0 0x30>;
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
muram {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges = <0 0 0x10000>;
|
||||||
|
|
||||||
|
data@0 {
|
||||||
|
compatible = "fsl,cpm-muram-data";
|
||||||
|
reg = <0 0x1100 0x1140
|
||||||
|
0xec0 0x9800 0x800>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
brg@119f0 {
|
||||||
|
compatible = "fsl,mpc8248-brg",
|
||||||
|
"fsl,cpm2-brg",
|
||||||
|
"fsl,cpm-brg";
|
||||||
|
reg = <0x119f0 0x10 0x115f0 0x10>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Monitor port/SMC1 */
|
||||||
|
smc1: serial@11a80 {
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "fsl,mpc8248-smc-uart",
|
||||||
|
"fsl,cpm2-smc-uart";
|
||||||
|
reg = <0x11a80 0x20 0x1100 0x40>;
|
||||||
|
interrupts = <4 8>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
fsl,cpm-brg = <7>;
|
||||||
|
fsl,cpm-command = <0x1d000000>;
|
||||||
|
linux,planetcore-label = "SMC1";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* "Serial" port/SCC1 */
|
||||||
|
scc1: serial@11a00 {
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "fsl,mpc8248-scc-uart",
|
||||||
|
"fsl,cpm2-scc-uart";
|
||||||
|
reg = <0x11a00 0x20 0x8000 0x100>;
|
||||||
|
interrupts = <40 8>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
fsl,cpm-brg = <1>;
|
||||||
|
fsl,cpm-command = <0x00800000>;
|
||||||
|
linux,planetcore-label = "SCC1";
|
||||||
|
};
|
||||||
|
|
||||||
|
eth0: ethernet@11300 {
|
||||||
|
device_type = "network";
|
||||||
|
compatible = "fsl,mpc8248-fcc-enet",
|
||||||
|
"fsl,cpm2-fcc-enet";
|
||||||
|
reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <32 8>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
phy-handle = <&PHY0>;
|
||||||
|
linux,network-index = <0>;
|
||||||
|
fsl,cpm-command = <0x12000300>;
|
||||||
|
};
|
||||||
|
|
||||||
|
eth1: ethernet@11320 {
|
||||||
|
device_type = "network";
|
||||||
|
compatible = "fsl,mpc8248-fcc-enet",
|
||||||
|
"fsl,cpm2-fcc-enet";
|
||||||
|
reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <33 8>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
phy-handle = <&PHY1>;
|
||||||
|
linux,network-index = <1>;
|
||||||
|
fsl,cpm-command = <0x16200300>;
|
||||||
|
};
|
||||||
|
|
||||||
|
usb@11b60 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
compatible = "fsl,mpc8248-usb",
|
||||||
|
"fsl,cpm2-usb";
|
||||||
|
reg = <0x11b60 0x18 0x8b00 0x100>;
|
||||||
|
interrupt-parent = <&PIC>;
|
||||||
|
interrupts = <11 8>;
|
||||||
|
fsl,cpm-command = <0x2e600000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
PIC: interrupt-controller@10c00 {
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
interrupt-controller;
|
||||||
|
reg = <0x10c00 0x80>;
|
||||||
|
compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
@ -45,10 +45,58 @@
|
||||||
reg = <00000000 08000000>; // 128MB at 0
|
reg = <00000000 08000000>; // 128MB at 0
|
||||||
};
|
};
|
||||||
|
|
||||||
|
localbus@e0005000 {
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
|
||||||
|
reg = <e0005000 1000>;
|
||||||
|
interrupts = <d#77 8>;
|
||||||
|
interrupt-parent = <&ipic>;
|
||||||
|
|
||||||
|
// CS0 and CS1 are swapped when
|
||||||
|
// booting from nand, but the
|
||||||
|
// addresses are the same.
|
||||||
|
ranges = <0 0 fe000000 00800000
|
||||||
|
1 0 e2800000 00008000
|
||||||
|
2 0 f0000000 00020000
|
||||||
|
3 0 fa000000 00008000>;
|
||||||
|
|
||||||
|
flash@0,0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "cfi-flash";
|
||||||
|
reg = <0 0 800000>;
|
||||||
|
bank-width = <2>;
|
||||||
|
device-width = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
nand@1,0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc8313-fcm-nand",
|
||||||
|
"fsl,elbc-fcm-nand";
|
||||||
|
reg = <1 0 2000>;
|
||||||
|
|
||||||
|
u-boot@0 {
|
||||||
|
reg = <0 100000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
kernel@100000 {
|
||||||
|
reg = <100000 300000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
fs@400000 {
|
||||||
|
reg = <400000 1c00000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
soc8313@e0000000 {
|
soc8313@e0000000 {
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <1>;
|
#size-cells = <1>;
|
||||||
device_type = "soc";
|
device_type = "soc";
|
||||||
|
compatible = "simple-bus";
|
||||||
ranges = <0 e0000000 00100000>;
|
ranges = <0 e0000000 00100000>;
|
||||||
reg = <e0000000 00000200>;
|
reg = <e0000000 00000200>;
|
||||||
bus-frequency = <0>;
|
bus-frequency = <0>;
|
||||||
|
|
@ -92,7 +140,6 @@
|
||||||
|
|
||||||
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
||||||
usb@23000 {
|
usb@23000 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "fsl-usb2-dr";
|
compatible = "fsl-usb2-dr";
|
||||||
reg = <23000 1000>;
|
reg = <23000 1000>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
|
|
|
||||||
|
|
@ -7,6 +7,18 @@
|
||||||
* under the terms of the GNU General Public License as published by the
|
* under the terms of the GNU General Public License as published by the
|
||||||
* Free Software Foundation; either version 2 of the License, or (at your
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
* option) any later version.
|
* option) any later version.
|
||||||
|
|
||||||
|
* To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do
|
||||||
|
* this:
|
||||||
|
*
|
||||||
|
* 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board.
|
||||||
|
* 2) Solder a wire from U61-21 to P19A-23. P19 is a grid of pins on the board
|
||||||
|
* next to the serial ports.
|
||||||
|
* 3) Solder a wire from U61-22 to P19K-22.
|
||||||
|
*
|
||||||
|
* Note that there's a typo in the schematic. The board labels the last column
|
||||||
|
* of pins "P19K", but in the schematic, that column is called "P19J". So if
|
||||||
|
* you're going by the schematic, the pin is called "P19J-K22".
|
||||||
*/
|
*/
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
|
|
@ -169,6 +181,23 @@
|
||||||
1 1e 1 0 1 0 /* TX_EN */
|
1 1e 1 0 1 0 /* TX_EN */
|
||||||
1 1f 2 0 1 0>;/* CRS */
|
1 1f 2 0 1 0>;/* CRS */
|
||||||
};
|
};
|
||||||
|
pio5: ucc_pin@05 {
|
||||||
|
pio-map = <
|
||||||
|
/*
|
||||||
|
* open has
|
||||||
|
* port pin dir drain sel irq
|
||||||
|
*/
|
||||||
|
2 0 1 0 2 0 /* TxD5 */
|
||||||
|
2 8 2 0 2 0 /* RxD5 */
|
||||||
|
|
||||||
|
2 1d 2 0 0 0 /* CTS5 */
|
||||||
|
2 1f 1 0 2 0 /* RTS5 */
|
||||||
|
|
||||||
|
2 18 2 0 0 0 /* CD */
|
||||||
|
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
@ -176,6 +205,7 @@
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <1>;
|
#size-cells = <1>;
|
||||||
device_type = "qe";
|
device_type = "qe";
|
||||||
|
compatible = "fsl,qe";
|
||||||
model = "QE";
|
model = "QE";
|
||||||
ranges = <0 e0100000 00100000>;
|
ranges = <0 e0100000 00100000>;
|
||||||
reg = <e0100000 480>;
|
reg = <e0100000 480>;
|
||||||
|
|
@ -210,7 +240,6 @@
|
||||||
};
|
};
|
||||||
|
|
||||||
usb@6c0 {
|
usb@6c0 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "qe_udc";
|
compatible = "qe_udc";
|
||||||
reg = <6c0 40 8B00 100>;
|
reg = <6c0 40 8B00 100>;
|
||||||
interrupts = <b>;
|
interrupts = <b>;
|
||||||
|
|
@ -250,6 +279,26 @@
|
||||||
pio-handle = < &pio4 >;
|
pio-handle = < &pio4 >;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
ucc@2400 {
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ucc_uart";
|
||||||
|
model = "UCC";
|
||||||
|
device-id = <5>; /* The UCC number, 1-7*/
|
||||||
|
port-number = <0>; /* Which ttyQEx device */
|
||||||
|
soft-uart; /* We need Soft-UART */
|
||||||
|
reg = <2400 200>;
|
||||||
|
interrupts = <28>; /* From Table 18-12 */
|
||||||
|
interrupt-parent = < &qeic >;
|
||||||
|
/*
|
||||||
|
* For Soft-UART, we need to set TX to 1X, which
|
||||||
|
* means specifying separate clock sources.
|
||||||
|
*/
|
||||||
|
rx-clock-name = "brg5";
|
||||||
|
tx-clock-name = "brg6";
|
||||||
|
pio-handle = < &pio5 >;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
mdio@2320 {
|
mdio@2320 {
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
|
|
|
||||||
|
|
@ -91,7 +91,6 @@
|
||||||
};
|
};
|
||||||
|
|
||||||
usb@22000 {
|
usb@22000 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "fsl-usb2-mph";
|
compatible = "fsl-usb2-mph";
|
||||||
reg = <22000 1000>;
|
reg = <22000 1000>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
|
|
@ -103,7 +102,6 @@
|
||||||
};
|
};
|
||||||
|
|
||||||
usb@23000 {
|
usb@23000 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "fsl-usb2-dr";
|
compatible = "fsl-usb2-dr";
|
||||||
reg = <23000 1000>;
|
reg = <23000 1000>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
|
|
@ -127,14 +125,6 @@
|
||||||
reg = <1c>;
|
reg = <1c>;
|
||||||
device_type = "ethernet-phy";
|
device_type = "ethernet-phy";
|
||||||
};
|
};
|
||||||
|
|
||||||
/* Vitesse 7385 */
|
|
||||||
phy1f: ethernet-phy@1f {
|
|
||||||
interrupt-parent = < &ipic >;
|
|
||||||
interrupts = <12 8>;
|
|
||||||
reg = <1f>;
|
|
||||||
device_type = "ethernet-phy";
|
|
||||||
};
|
|
||||||
};
|
};
|
||||||
|
|
||||||
enet0: ethernet@24000 {
|
enet0: ethernet@24000 {
|
||||||
|
|
@ -159,7 +149,8 @@
|
||||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
interrupts = <23 8 24 8 25 8>;
|
interrupts = <23 8 24 8 25 8>;
|
||||||
interrupt-parent = < &ipic >;
|
interrupt-parent = < &ipic >;
|
||||||
phy-handle = < &phy1f >;
|
/* Vitesse 7385 isn't on the MDIO bus */
|
||||||
|
fixed-link = <1 1 d#1000 0 0>;
|
||||||
linux,network-index = <1>;
|
linux,network-index = <1>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
@ -253,6 +244,21 @@
|
||||||
device_type = "pci";
|
device_type = "pci";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
localbus@e0005000 {
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc8349e-localbus",
|
||||||
|
"fsl,pq2pro-localbus";
|
||||||
|
reg = <e0005000 d8>;
|
||||||
|
ranges = <3 0 f0000000 210>;
|
||||||
|
|
||||||
|
pata@3,0 {
|
||||||
|
compatible = "fsl,mpc8349emitx-pata", "ata-generic";
|
||||||
|
reg = <3 0 10 3 20c 4>;
|
||||||
|
reg-shift = <1>;
|
||||||
|
pio-mode = <6>;
|
||||||
|
interrupts = <17 8>;
|
||||||
|
interrupt-parent = <&ipic>;
|
||||||
|
};
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
|
||||||
|
|
@ -89,7 +89,6 @@
|
||||||
};
|
};
|
||||||
|
|
||||||
usb@23000 {
|
usb@23000 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "fsl-usb2-dr";
|
compatible = "fsl-usb2-dr";
|
||||||
reg = <23000 1000>;
|
reg = <23000 1000>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
|
|
|
||||||
|
|
@ -104,7 +104,6 @@
|
||||||
/* phy type (ULPI or SERIAL) are only types supportted for MPH */
|
/* phy type (ULPI or SERIAL) are only types supportted for MPH */
|
||||||
/* port = 0 or 1 */
|
/* port = 0 or 1 */
|
||||||
usb@22000 {
|
usb@22000 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "fsl-usb2-mph";
|
compatible = "fsl-usb2-mph";
|
||||||
reg = <22000 1000>;
|
reg = <22000 1000>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
|
|
@ -116,7 +115,6 @@
|
||||||
};
|
};
|
||||||
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
||||||
usb@23000 {
|
usb@23000 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "fsl-usb2-dr";
|
compatible = "fsl-usb2-dr";
|
||||||
reg = <23000 1000>;
|
reg = <23000 1000>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
|
|
|
||||||
|
|
@ -241,7 +241,6 @@
|
||||||
};
|
};
|
||||||
|
|
||||||
usb@6c0 {
|
usb@6c0 {
|
||||||
device_type = "usb";
|
|
||||||
compatible = "qe_udc";
|
compatible = "qe_udc";
|
||||||
reg = <6c0 40 8B00 100>;
|
reg = <6c0 40 8B00 100>;
|
||||||
interrupts = <b>;
|
interrupts = <b>;
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,279 @@
|
||||||
|
/*
|
||||||
|
* MPC8377E MDS Device Tree Source
|
||||||
|
*
|
||||||
|
* Copyright 2007 Freescale Semiconductor Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by the
|
||||||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
* option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "fsl,mpc8377emds";
|
||||||
|
compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
ethernet0 = &enet0;
|
||||||
|
ethernet1 = &enet1;
|
||||||
|
serial0 = &serial0;
|
||||||
|
serial1 = &serial1;
|
||||||
|
pci0 = &pci0;
|
||||||
|
};
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PowerPC,8377@0 {
|
||||||
|
device_type = "cpu";
|
||||||
|
reg = <0>;
|
||||||
|
d-cache-line-size = <0x20>;
|
||||||
|
i-cache-line-size = <0x20>;
|
||||||
|
d-cache-size = <0x8000>; // L1, 32K
|
||||||
|
i-cache-size = <0x8000>; // L1, 32K
|
||||||
|
timebase-frequency = <0>;
|
||||||
|
bus-frequency = <0>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0x00000000 0x20000000>; // 512MB at 0
|
||||||
|
};
|
||||||
|
|
||||||
|
soc@e0000000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
device_type = "soc";
|
||||||
|
ranges = <0x0 0xe0000000 0x00100000>;
|
||||||
|
reg = <0xe0000000 0x00000200>;
|
||||||
|
bus-frequency = <0>;
|
||||||
|
|
||||||
|
wdt@200 {
|
||||||
|
compatible = "mpc83xx_wdt";
|
||||||
|
reg = <0x200 0x100>;
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c@3000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
cell-index = <0>;
|
||||||
|
compatible = "fsl-i2c";
|
||||||
|
reg = <0x3000 0x100>;
|
||||||
|
interrupts = <0xe 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
dfsrr;
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c@3100 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
cell-index = <1>;
|
||||||
|
compatible = "fsl-i2c";
|
||||||
|
reg = <0x3100 0x100>;
|
||||||
|
interrupts = <0xf 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
dfsrr;
|
||||||
|
};
|
||||||
|
|
||||||
|
spi@7000 {
|
||||||
|
compatible = "fsl_spi";
|
||||||
|
reg = <0x7000 0x1000>;
|
||||||
|
interrupts = <0x10 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
mode = "cpu";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
||||||
|
usb@23000 {
|
||||||
|
compatible = "fsl-usb2-dr";
|
||||||
|
reg = <0x23000 0x1000>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x26 0x8>;
|
||||||
|
phy_type = "utmi_wide";
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio@24520 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
compatible = "fsl,gianfar-mdio";
|
||||||
|
reg = <0x24520 0x20>;
|
||||||
|
phy2: ethernet-phy@2 {
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x11 0x8>;
|
||||||
|
reg = <2>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
phy3: ethernet-phy@3 {
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x12 0x8>;
|
||||||
|
reg = <3>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
enet0: ethernet@24000 {
|
||||||
|
cell-index = <0>;
|
||||||
|
device_type = "network";
|
||||||
|
model = "eTSEC";
|
||||||
|
compatible = "gianfar";
|
||||||
|
reg = <0x24000 0x1000>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
|
||||||
|
phy-connection-type = "mii";
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
phy-handle = < &phy2 >;
|
||||||
|
};
|
||||||
|
|
||||||
|
enet1: ethernet@25000 {
|
||||||
|
cell-index = <1>;
|
||||||
|
device_type = "network";
|
||||||
|
model = "eTSEC";
|
||||||
|
compatible = "gianfar";
|
||||||
|
reg = <0x25000 0x1000>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
|
||||||
|
phy-connection-type = "mii";
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
phy-handle = < &phy3 >;
|
||||||
|
};
|
||||||
|
|
||||||
|
serial0: serial@4500 {
|
||||||
|
cell-index = <0>;
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ns16550";
|
||||||
|
reg = <0x4500 0x100>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
interrupts = <0x9 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
serial1: serial@4600 {
|
||||||
|
cell-index = <1>;
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ns16550";
|
||||||
|
reg = <0x4600 0x100>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
interrupts = <0xa 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
crypto@30000 {
|
||||||
|
model = "SEC3";
|
||||||
|
compatible = "talitos";
|
||||||
|
reg = <0x30000 0x10000>;
|
||||||
|
interrupts = <0xb 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
/* Rev. 3.0 geometry */
|
||||||
|
num-channels = <4>;
|
||||||
|
channel-fifo-len = <0x18>;
|
||||||
|
exec-units-mask = <0x000001fe>;
|
||||||
|
descriptor-types-mask = <0x03ab0ebf>;
|
||||||
|
};
|
||||||
|
|
||||||
|
sdhc@2e000 {
|
||||||
|
model = "eSDHC";
|
||||||
|
compatible = "fsl,esdhc";
|
||||||
|
reg = <0x2e000 0x1000>;
|
||||||
|
interrupts = <0x2a 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
sata@18000 {
|
||||||
|
compatible = "fsl,mpc8379-sata";
|
||||||
|
reg = <0x18000 0x1000>;
|
||||||
|
interrupts = <0x2c 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
sata@19000 {
|
||||||
|
compatible = "fsl,mpc8379-sata";
|
||||||
|
reg = <0x19000 0x1000>;
|
||||||
|
interrupts = <0x2d 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* IPIC
|
||||||
|
* interrupts cell = <intr #, sense>
|
||||||
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
||||||
|
* sense == 8: Level, low assertion
|
||||||
|
* sense == 2: Edge, high-to-low change
|
||||||
|
*/
|
||||||
|
ipic: pic@700 {
|
||||||
|
compatible = "fsl,ipic";
|
||||||
|
interrupt-controller;
|
||||||
|
#address-cells = <0>;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
reg = <0x700 0x100>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
pci0: pci@e0008500 {
|
||||||
|
cell-index = <0>;
|
||||||
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||||
|
interrupt-map = <
|
||||||
|
|
||||||
|
/* IDSEL 0x11 */
|
||||||
|
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
|
||||||
|
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
|
||||||
|
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
|
||||||
|
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x12 */
|
||||||
|
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
|
||||||
|
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
|
||||||
|
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
|
||||||
|
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x13 */
|
||||||
|
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
|
||||||
|
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
|
||||||
|
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
|
||||||
|
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x15 */
|
||||||
|
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
|
||||||
|
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
|
||||||
|
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
|
||||||
|
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x16 */
|
||||||
|
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
|
||||||
|
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
|
||||||
|
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
|
||||||
|
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x17 */
|
||||||
|
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
|
||||||
|
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
|
||||||
|
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
|
||||||
|
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x18 */
|
||||||
|
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
|
||||||
|
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
|
||||||
|
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
|
||||||
|
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x42 0x8>;
|
||||||
|
bus-range = <0 0>;
|
||||||
|
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
||||||
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
||||||
|
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
#address-cells = <3>;
|
||||||
|
reg = <0xe0008500 0x100>;
|
||||||
|
compatible = "fsl,mpc8349-pci";
|
||||||
|
device_type = "pci";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,265 @@
|
||||||
|
/*
|
||||||
|
* MPC8378E MDS Device Tree Source
|
||||||
|
*
|
||||||
|
* Copyright 2007 Freescale Semiconductor Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by the
|
||||||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
* option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "fsl,mpc8378emds";
|
||||||
|
compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
ethernet0 = &enet0;
|
||||||
|
ethernet1 = &enet1;
|
||||||
|
serial0 = &serial0;
|
||||||
|
serial1 = &serial1;
|
||||||
|
pci0 = &pci0;
|
||||||
|
};
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PowerPC,8378@0 {
|
||||||
|
device_type = "cpu";
|
||||||
|
reg = <0>;
|
||||||
|
d-cache-line-size = <0x20>;
|
||||||
|
i-cache-line-size = <0x20>;
|
||||||
|
d-cache-size = <0x8000>; // L1, 32K
|
||||||
|
i-cache-size = <0x8000>; // L1, 32K
|
||||||
|
timebase-frequency = <0>;
|
||||||
|
bus-frequency = <0>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0x00000000 0x20000000>; // 512MB at 0
|
||||||
|
};
|
||||||
|
|
||||||
|
soc@e0000000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
device_type = "soc";
|
||||||
|
ranges = <0x0 0xe0000000 0x00100000>;
|
||||||
|
reg = <0xe0000000 0x00000200>;
|
||||||
|
bus-frequency = <0>;
|
||||||
|
|
||||||
|
wdt@200 {
|
||||||
|
compatible = "mpc83xx_wdt";
|
||||||
|
reg = <0x200 0x100>;
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c@3000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
cell-index = <0>;
|
||||||
|
compatible = "fsl-i2c";
|
||||||
|
reg = <0x3000 0x100>;
|
||||||
|
interrupts = <0xe 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
dfsrr;
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c@3100 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
cell-index = <1>;
|
||||||
|
compatible = "fsl-i2c";
|
||||||
|
reg = <0x3100 0x100>;
|
||||||
|
interrupts = <0xf 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
dfsrr;
|
||||||
|
};
|
||||||
|
|
||||||
|
spi@7000 {
|
||||||
|
compatible = "fsl_spi";
|
||||||
|
reg = <0x7000 0x1000>;
|
||||||
|
interrupts = <0x10 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
mode = "cpu";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
||||||
|
usb@23000 {
|
||||||
|
compatible = "fsl-usb2-dr";
|
||||||
|
reg = <0x23000 0x1000>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x26 0x8>;
|
||||||
|
phy_type = "utmi_wide";
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio@24520 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
compatible = "fsl,gianfar-mdio";
|
||||||
|
reg = <0x24520 0x20>;
|
||||||
|
phy2: ethernet-phy@2 {
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x11 0x8>;
|
||||||
|
reg = <2>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
phy3: ethernet-phy@3 {
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x12 0x8>;
|
||||||
|
reg = <3>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
enet0: ethernet@24000 {
|
||||||
|
cell-index = <0>;
|
||||||
|
device_type = "network";
|
||||||
|
model = "eTSEC";
|
||||||
|
compatible = "gianfar";
|
||||||
|
reg = <0x24000 0x1000>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
|
||||||
|
phy-connection-type = "mii";
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
phy-handle = < &phy2 >;
|
||||||
|
};
|
||||||
|
|
||||||
|
enet1: ethernet@25000 {
|
||||||
|
cell-index = <1>;
|
||||||
|
device_type = "network";
|
||||||
|
model = "eTSEC";
|
||||||
|
compatible = "gianfar";
|
||||||
|
reg = <0x25000 0x1000>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
|
||||||
|
phy-connection-type = "mii";
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
phy-handle = < &phy3 >;
|
||||||
|
};
|
||||||
|
|
||||||
|
serial0: serial@4500 {
|
||||||
|
cell-index = <0>;
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ns16550";
|
||||||
|
reg = <0x4500 0x100>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
interrupts = <0x9 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
serial1: serial@4600 {
|
||||||
|
cell-index = <1>;
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ns16550";
|
||||||
|
reg = <0x4600 0x100>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
interrupts = <0xa 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
crypto@30000 {
|
||||||
|
model = "SEC3";
|
||||||
|
compatible = "talitos";
|
||||||
|
reg = <0x30000 0x10000>;
|
||||||
|
interrupts = <0xb 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
/* Rev. 3.0 geometry */
|
||||||
|
num-channels = <4>;
|
||||||
|
channel-fifo-len = <0x18>;
|
||||||
|
exec-units-mask = <0x000001fe>;
|
||||||
|
descriptor-types-mask = <0x03ab0ebf>;
|
||||||
|
};
|
||||||
|
|
||||||
|
sdhc@2e000 {
|
||||||
|
model = "eSDHC";
|
||||||
|
compatible = "fsl,esdhc";
|
||||||
|
reg = <0x2e000 0x1000>;
|
||||||
|
interrupts = <0x2a 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* IPIC
|
||||||
|
* interrupts cell = <intr #, sense>
|
||||||
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
||||||
|
* sense == 8: Level, low assertion
|
||||||
|
* sense == 2: Edge, high-to-low change
|
||||||
|
*/
|
||||||
|
ipic: pic@700 {
|
||||||
|
compatible = "fsl,ipic";
|
||||||
|
interrupt-controller;
|
||||||
|
#address-cells = <0>;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
reg = <0x700 0x100>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
pci0: pci@e0008500 {
|
||||||
|
cell-index = <0>;
|
||||||
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||||
|
interrupt-map = <
|
||||||
|
|
||||||
|
/* IDSEL 0x11 */
|
||||||
|
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
|
||||||
|
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
|
||||||
|
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
|
||||||
|
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x12 */
|
||||||
|
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
|
||||||
|
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
|
||||||
|
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
|
||||||
|
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x13 */
|
||||||
|
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
|
||||||
|
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
|
||||||
|
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
|
||||||
|
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x15 */
|
||||||
|
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
|
||||||
|
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
|
||||||
|
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
|
||||||
|
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x16 */
|
||||||
|
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
|
||||||
|
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
|
||||||
|
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
|
||||||
|
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x17 */
|
||||||
|
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
|
||||||
|
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
|
||||||
|
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
|
||||||
|
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x18 */
|
||||||
|
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
|
||||||
|
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
|
||||||
|
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
|
||||||
|
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x42 0x8>;
|
||||||
|
bus-range = <0 0>;
|
||||||
|
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
||||||
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
||||||
|
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
#address-cells = <3>;
|
||||||
|
reg = <0xe0008500 0x100>;
|
||||||
|
compatible = "fsl,mpc8349-pci";
|
||||||
|
device_type = "pci";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,293 @@
|
||||||
|
/*
|
||||||
|
* MPC8379E MDS Device Tree Source
|
||||||
|
*
|
||||||
|
* Copyright 2007 Freescale Semiconductor Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by the
|
||||||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
* option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "fsl,mpc8379emds";
|
||||||
|
compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
ethernet0 = &enet0;
|
||||||
|
ethernet1 = &enet1;
|
||||||
|
serial0 = &serial0;
|
||||||
|
serial1 = &serial1;
|
||||||
|
pci0 = &pci0;
|
||||||
|
};
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PowerPC,8379@0 {
|
||||||
|
device_type = "cpu";
|
||||||
|
reg = <0>;
|
||||||
|
d-cache-line-size = <0x20>;
|
||||||
|
i-cache-line-size = <0x20>;
|
||||||
|
d-cache-size = <0x8000>; // L1, 32K
|
||||||
|
i-cache-size = <0x8000>; // L1, 32K
|
||||||
|
timebase-frequency = <0>;
|
||||||
|
bus-frequency = <0>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0x00000000 0x20000000>; // 512MB at 0
|
||||||
|
};
|
||||||
|
|
||||||
|
soc@e0000000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
device_type = "soc";
|
||||||
|
ranges = <0x0 0xe0000000 0x00100000>;
|
||||||
|
reg = <0xe0000000 0x00000200>;
|
||||||
|
bus-frequency = <0>;
|
||||||
|
|
||||||
|
wdt@200 {
|
||||||
|
compatible = "mpc83xx_wdt";
|
||||||
|
reg = <0x200 0x100>;
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c@3000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
cell-index = <0>;
|
||||||
|
compatible = "fsl-i2c";
|
||||||
|
reg = <0x3000 0x100>;
|
||||||
|
interrupts = <0xe 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
dfsrr;
|
||||||
|
};
|
||||||
|
|
||||||
|
i2c@3100 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
cell-index = <1>;
|
||||||
|
compatible = "fsl-i2c";
|
||||||
|
reg = <0x3100 0x100>;
|
||||||
|
interrupts = <0xf 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
dfsrr;
|
||||||
|
};
|
||||||
|
|
||||||
|
spi@7000 {
|
||||||
|
compatible = "fsl_spi";
|
||||||
|
reg = <0x7000 0x1000>;
|
||||||
|
interrupts = <0x10 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
mode = "cpu";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
||||||
|
usb@23000 {
|
||||||
|
compatible = "fsl-usb2-dr";
|
||||||
|
reg = <0x23000 0x1000>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x26 0x8>;
|
||||||
|
phy_type = "utmi_wide";
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio@24520 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
compatible = "fsl,gianfar-mdio";
|
||||||
|
reg = <0x24520 0x20>;
|
||||||
|
phy2: ethernet-phy@2 {
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x11 0x8>;
|
||||||
|
reg = <2>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
phy3: ethernet-phy@3 {
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x12 0x8>;
|
||||||
|
reg = <3>;
|
||||||
|
device_type = "ethernet-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
enet0: ethernet@24000 {
|
||||||
|
cell-index = <0>;
|
||||||
|
device_type = "network";
|
||||||
|
model = "eTSEC";
|
||||||
|
compatible = "gianfar";
|
||||||
|
reg = <0x24000 0x1000>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
|
||||||
|
phy-connection-type = "mii";
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
phy-handle = < &phy2 >;
|
||||||
|
};
|
||||||
|
|
||||||
|
enet1: ethernet@25000 {
|
||||||
|
cell-index = <1>;
|
||||||
|
device_type = "network";
|
||||||
|
model = "eTSEC";
|
||||||
|
compatible = "gianfar";
|
||||||
|
reg = <0x25000 0x1000>;
|
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||||
|
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
|
||||||
|
phy-connection-type = "mii";
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
phy-handle = < &phy3 >;
|
||||||
|
};
|
||||||
|
|
||||||
|
serial0: serial@4500 {
|
||||||
|
cell-index = <0>;
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ns16550";
|
||||||
|
reg = <0x4500 0x100>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
interrupts = <0x9 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
serial1: serial@4600 {
|
||||||
|
cell-index = <1>;
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ns16550";
|
||||||
|
reg = <0x4600 0x100>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
interrupts = <0xa 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
crypto@30000 {
|
||||||
|
model = "SEC3";
|
||||||
|
compatible = "talitos";
|
||||||
|
reg = <0x30000 0x10000>;
|
||||||
|
interrupts = <0xb 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
/* Rev. 3.0 geometry */
|
||||||
|
num-channels = <4>;
|
||||||
|
channel-fifo-len = <0x18>;
|
||||||
|
exec-units-mask = <0x000001fe>;
|
||||||
|
descriptor-types-mask = <0x03ab0ebf>;
|
||||||
|
};
|
||||||
|
|
||||||
|
sdhc@2e000 {
|
||||||
|
model = "eSDHC";
|
||||||
|
compatible = "fsl,esdhc";
|
||||||
|
reg = <0x2e000 0x1000>;
|
||||||
|
interrupts = <0x2a 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
sata@18000 {
|
||||||
|
compatible = "fsl,mpc8379-sata";
|
||||||
|
reg = <0x18000 0x1000>;
|
||||||
|
interrupts = <0x2c 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
sata@19000 {
|
||||||
|
compatible = "fsl,mpc8379-sata";
|
||||||
|
reg = <0x19000 0x1000>;
|
||||||
|
interrupts = <0x2d 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
sata@1a000 {
|
||||||
|
compatible = "fsl,mpc8379-sata";
|
||||||
|
reg = <0x1a000 0x1000>;
|
||||||
|
interrupts = <0x2e 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
sata@1b000 {
|
||||||
|
compatible = "fsl,mpc8379-sata";
|
||||||
|
reg = <0x1b000 0x1000>;
|
||||||
|
interrupts = <0x2f 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* IPIC
|
||||||
|
* interrupts cell = <intr #, sense>
|
||||||
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
||||||
|
* sense == 8: Level, low assertion
|
||||||
|
* sense == 2: Edge, high-to-low change
|
||||||
|
*/
|
||||||
|
ipic: pic@700 {
|
||||||
|
compatible = "fsl,ipic";
|
||||||
|
interrupt-controller;
|
||||||
|
#address-cells = <0>;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
reg = <0x700 0x100>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
pci0: pci@e0008500 {
|
||||||
|
cell-index = <0>;
|
||||||
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||||
|
interrupt-map = <
|
||||||
|
|
||||||
|
/* IDSEL 0x11 */
|
||||||
|
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
|
||||||
|
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
|
||||||
|
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
|
||||||
|
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x12 */
|
||||||
|
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
|
||||||
|
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
|
||||||
|
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
|
||||||
|
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x13 */
|
||||||
|
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
|
||||||
|
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
|
||||||
|
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
|
||||||
|
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x15 */
|
||||||
|
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
|
||||||
|
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
|
||||||
|
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
|
||||||
|
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x16 */
|
||||||
|
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
|
||||||
|
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
|
||||||
|
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
|
||||||
|
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x17 */
|
||||||
|
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
|
||||||
|
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
|
||||||
|
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
|
||||||
|
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
|
||||||
|
|
||||||
|
/* IDSEL 0x18 */
|
||||||
|
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
|
||||||
|
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
|
||||||
|
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
|
||||||
|
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
|
||||||
|
interrupt-parent = < &ipic >;
|
||||||
|
interrupts = <0x42 0x8>;
|
||||||
|
bus-range = <0 0>;
|
||||||
|
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
||||||
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
||||||
|
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
|
||||||
|
clock-frequency = <0>;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
#address-cells = <3>;
|
||||||
|
reg = <0xe0008500 0x100>;
|
||||||
|
compatible = "fsl,mpc8349-pci";
|
||||||
|
device_type = "pci";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
@ -304,9 +304,9 @@
|
||||||
interrupt-map = <
|
interrupt-map = <
|
||||||
// IDSEL 0x1c USB
|
// IDSEL 0x1c USB
|
||||||
e000 0 0 1 &i8259 c 2
|
e000 0 0 1 &i8259 c 2
|
||||||
e100 0 0 1 &i8259 9 2
|
e100 0 0 2 &i8259 9 2
|
||||||
e200 0 0 1 &i8259 a 2
|
e200 0 0 3 &i8259 a 2
|
||||||
e300 0 0 1 &i8259 b 2
|
e300 0 0 4 &i8259 b 2
|
||||||
|
|
||||||
// IDSEL 0x1d Audio
|
// IDSEL 0x1d Audio
|
||||||
e800 0 0 1 &i8259 6 2
|
e800 0 0 1 &i8259 6 2
|
||||||
|
|
|
||||||
|
|
@ -334,9 +334,9 @@
|
||||||
|
|
||||||
// IDSEL 0x1c USB
|
// IDSEL 0x1c USB
|
||||||
e000 0 0 1 &i8259 c 2
|
e000 0 0 1 &i8259 c 2
|
||||||
e100 0 0 1 &i8259 9 2
|
e100 0 0 2 &i8259 9 2
|
||||||
e200 0 0 1 &i8259 a 2
|
e200 0 0 3 &i8259 a 2
|
||||||
e300 0 0 1 &i8259 b 2
|
e300 0 0 4 &i8259 b 2
|
||||||
|
|
||||||
// IDSEL 0x1d Audio
|
// IDSEL 0x1d Audio
|
||||||
e800 0 0 1 &i8259 6 2
|
e800 0 0 1 &i8259 6 2
|
||||||
|
|
@ -481,6 +481,7 @@
|
||||||
clock-frequency = <1fca055>;
|
clock-frequency = <1fca055>;
|
||||||
interrupt-parent = <&mpic>;
|
interrupt-parent = <&mpic>;
|
||||||
interrupts = <1b 2>;
|
interrupts = <1b 2>;
|
||||||
|
interrupt-map-mask = <f800 0 0 7>;
|
||||||
interrupt-map = <
|
interrupt-map = <
|
||||||
/* IDSEL 0x0 */
|
/* IDSEL 0x0 */
|
||||||
0000 0 0 1 &mpic 0 1
|
0000 0 0 1 &mpic 0 1
|
||||||
|
|
|
||||||
|
|
@ -1,7 +1,7 @@
|
||||||
/*
|
/*
|
||||||
* MPC8610 HPCD Device Tree Source
|
* MPC8610 HPCD Device Tree Source
|
||||||
*
|
*
|
||||||
* Copyright 2007 Freescale Semiconductor Inc.
|
* Copyright 2007-2008 Freescale Semiconductor Inc.
|
||||||
*
|
*
|
||||||
* This program is free software; you can redistribute it and/or modify it
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
* under the terms of the GNU General Public License Version 2 as published
|
* under the terms of the GNU General Public License Version 2 as published
|
||||||
|
|
@ -49,6 +49,7 @@
|
||||||
#size-cells = <1>;
|
#size-cells = <1>;
|
||||||
#interrupt-cells = <2>;
|
#interrupt-cells = <2>;
|
||||||
device_type = "soc";
|
device_type = "soc";
|
||||||
|
compatible = "fsl,mpc8610-immr", "simple-bus";
|
||||||
ranges = <0 e0000000 00100000>;
|
ranges = <0 e0000000 00100000>;
|
||||||
reg = <e0000000 1000>;
|
reg = <e0000000 1000>;
|
||||||
bus-frequency = <0>;
|
bus-frequency = <0>;
|
||||||
|
|
@ -62,6 +63,13 @@
|
||||||
interrupts = <2b 2>;
|
interrupts = <2b 2>;
|
||||||
interrupt-parent = <&mpic>;
|
interrupt-parent = <&mpic>;
|
||||||
dfsrr;
|
dfsrr;
|
||||||
|
|
||||||
|
cs4270:codec@4f {
|
||||||
|
compatible = "cirrus,cs4270";
|
||||||
|
reg = <4f>;
|
||||||
|
/* MCLK source is a stand-alone oscillator */
|
||||||
|
clock-frequency = <bb8000>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
i2c@3100 {
|
i2c@3100 {
|
||||||
|
|
@ -111,6 +119,109 @@
|
||||||
reg = <e0000 1000>;
|
reg = <e0000 1000>;
|
||||||
fsl,has-rstcr;
|
fsl,has-rstcr;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
i2s@16000 {
|
||||||
|
compatible = "fsl,mpc8610-ssi";
|
||||||
|
cell-index = <0>;
|
||||||
|
reg = <16000 100>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <3e 2>;
|
||||||
|
fsl,mode = "i2s-slave";
|
||||||
|
codec-handle = <&cs4270>;
|
||||||
|
};
|
||||||
|
|
||||||
|
ssi@16100 {
|
||||||
|
compatible = "fsl,mpc8610-ssi";
|
||||||
|
cell-index = <1>;
|
||||||
|
reg = <16100 100>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <3f 2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
dma@21300 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
|
||||||
|
cell-index = <0>;
|
||||||
|
reg = <21300 4>; /* DMA general status register */
|
||||||
|
ranges = <0 21100 200>;
|
||||||
|
|
||||||
|
dma-channel@0 {
|
||||||
|
compatible = "fsl,mpc8610-dma-channel",
|
||||||
|
"fsl,eloplus-dma-channel";
|
||||||
|
cell-index = <0>;
|
||||||
|
reg = <0 80>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <14 2>;
|
||||||
|
};
|
||||||
|
dma-channel@1 {
|
||||||
|
compatible = "fsl,mpc8610-dma-channel",
|
||||||
|
"fsl,eloplus-dma-channel";
|
||||||
|
cell-index = <1>;
|
||||||
|
reg = <80 80>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <15 2>;
|
||||||
|
};
|
||||||
|
dma-channel@2 {
|
||||||
|
compatible = "fsl,mpc8610-dma-channel",
|
||||||
|
"fsl,eloplus-dma-channel";
|
||||||
|
cell-index = <2>;
|
||||||
|
reg = <100 80>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <16 2>;
|
||||||
|
};
|
||||||
|
dma-channel@3 {
|
||||||
|
compatible = "fsl,mpc8610-dma-channel",
|
||||||
|
"fsl,eloplus-dma-channel";
|
||||||
|
cell-index = <3>;
|
||||||
|
reg = <180 80>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <17 2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
dma@c300 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
|
||||||
|
cell-index = <1>;
|
||||||
|
reg = <c300 4>; /* DMA general status register */
|
||||||
|
ranges = <0 c100 200>;
|
||||||
|
|
||||||
|
dma-channel@0 {
|
||||||
|
compatible = "fsl,mpc8610-dma-channel",
|
||||||
|
"fsl,mpc8540-dma-channel";
|
||||||
|
cell-index = <0>;
|
||||||
|
reg = <0 80>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <3c 2>;
|
||||||
|
};
|
||||||
|
dma-channel@1 {
|
||||||
|
compatible = "fsl,mpc8610-dma-channel",
|
||||||
|
"fsl,mpc8540-dma-channel";
|
||||||
|
cell-index = <1>;
|
||||||
|
reg = <80 80>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <3d 2>;
|
||||||
|
};
|
||||||
|
dma-channel@2 {
|
||||||
|
compatible = "fsl,mpc8610-dma-channel",
|
||||||
|
"fsl,mpc8540-dma-channel";
|
||||||
|
cell-index = <2>;
|
||||||
|
reg = <100 80>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <3e 2>;
|
||||||
|
};
|
||||||
|
dma-channel@3 {
|
||||||
|
compatible = "fsl,mpc8610-dma-channel",
|
||||||
|
"fsl,mpc8540-dma-channel";
|
||||||
|
cell-index = <3>;
|
||||||
|
reg = <180 80>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupts = <3f 2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
pci0: pci@e0008000 {
|
pci0: pci@e0008000 {
|
||||||
|
|
|
||||||
|
|
@ -60,10 +60,52 @@
|
||||||
reg = <00000000 40000000>; // 1G at 0x0
|
reg = <00000000 40000000>; // 1G at 0x0
|
||||||
};
|
};
|
||||||
|
|
||||||
|
localbus@f8005000 {
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "fsl,mpc8641-localbus", "simple-bus";
|
||||||
|
reg = <f8005000 1000>;
|
||||||
|
interrupts = <13 2>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
|
||||||
|
ranges = <0 0 ff800000 00800000
|
||||||
|
1 0 fe000000 01000000
|
||||||
|
2 0 f8200000 00100000
|
||||||
|
3 0 f8100000 00100000>;
|
||||||
|
|
||||||
|
flash@0,0 {
|
||||||
|
compatible = "cfi-flash";
|
||||||
|
reg = <0 0 00800000>;
|
||||||
|
bank-width = <2>;
|
||||||
|
device-width = <2>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
partition@0 {
|
||||||
|
label = "kernel";
|
||||||
|
reg = <00000000 00300000>;
|
||||||
|
};
|
||||||
|
partition@300000 {
|
||||||
|
label = "firmware b";
|
||||||
|
reg = <00300000 00100000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
partition@400000 {
|
||||||
|
label = "fs";
|
||||||
|
reg = <00400000 00300000>;
|
||||||
|
};
|
||||||
|
partition@700000 {
|
||||||
|
label = "firmware a";
|
||||||
|
reg = <00700000 00100000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
soc8641@f8000000 {
|
soc8641@f8000000 {
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <1>;
|
#size-cells = <1>;
|
||||||
device_type = "soc";
|
device_type = "soc";
|
||||||
|
compatible = "simple-bus";
|
||||||
ranges = <00000000 f8000000 00100000>;
|
ranges = <00000000 f8000000 00100000>;
|
||||||
reg = <f8000000 00001000>; // CCSRBAR
|
reg = <f8000000 00001000>; // CCSRBAR
|
||||||
bus-frequency = <0>;
|
bus-frequency = <0>;
|
||||||
|
|
@ -326,9 +368,9 @@
|
||||||
|
|
||||||
// IDSEL 0x1c USB
|
// IDSEL 0x1c USB
|
||||||
e000 0 0 1 &i8259 c 2
|
e000 0 0 1 &i8259 c 2
|
||||||
e100 0 0 1 &i8259 9 2
|
e100 0 0 2 &i8259 9 2
|
||||||
e200 0 0 1 &i8259 a 2
|
e200 0 0 3 &i8259 a 2
|
||||||
e300 0 0 1 &i8259 b 2
|
e300 0 0 4 &i8259 b 2
|
||||||
|
|
||||||
// IDSEL 0x1d Audio
|
// IDSEL 0x1d Audio
|
||||||
e800 0 0 1 &i8259 6 2
|
e800 0 0 1 &i8259 6 2
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,138 @@
|
||||||
|
/*
|
||||||
|
* Device Tree Source for IOMEGA StorCenter
|
||||||
|
*
|
||||||
|
* Copyright 2007 Oyvind Repvik
|
||||||
|
* Copyright 2007 Jon Loeliger
|
||||||
|
*
|
||||||
|
* Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de>
|
||||||
|
*
|
||||||
|
* This file is licensed under the terms of the GNU General Public
|
||||||
|
* License version 2. This program is licensed "as is" without any
|
||||||
|
* warranty of any kind, whether express or implied.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "StorCenter";
|
||||||
|
compatible = "storcenter";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
serial0 = &serial0;
|
||||||
|
serial1 = &serial1;
|
||||||
|
pci0 = &pci0;
|
||||||
|
};
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
PowerPC,8241@0 {
|
||||||
|
device_type = "cpu";
|
||||||
|
reg = <0>;
|
||||||
|
clock-frequency = <d# 200000000>; /* Hz */
|
||||||
|
timebase-frequency = <d# 25000000>; /* Hz */
|
||||||
|
bus-frequency = <0>; /* from bootwrapper */
|
||||||
|
i-cache-line-size = <d# 32>; /* bytes */
|
||||||
|
d-cache-line-size = <d# 32>; /* bytes */
|
||||||
|
i-cache-size = <4000>;
|
||||||
|
d-cache-size = <4000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <00000000 04000000>; /* 64MB @ 0x0 */
|
||||||
|
};
|
||||||
|
|
||||||
|
soc@fc000000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
device_type = "soc";
|
||||||
|
compatible = "fsl,mpc8241", "mpc10x";
|
||||||
|
store-gathering = <0>; /* 0 == off, !0 == on */
|
||||||
|
ranges = <0 fc000000 100000>;
|
||||||
|
reg = <fc000000 100000>; /* EUMB */
|
||||||
|
bus-frequency = <0>; /* fixed by loader */
|
||||||
|
|
||||||
|
i2c@3000 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
compatible = "fsl-i2c";
|
||||||
|
reg = <3000 100>;
|
||||||
|
interrupts = <5 2>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
|
||||||
|
rtc@68 {
|
||||||
|
compatible = "dallas,ds1337";
|
||||||
|
reg = <68>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
serial0: serial@4500 {
|
||||||
|
cell-index = <0>;
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ns16550";
|
||||||
|
reg = <4500 20>;
|
||||||
|
clock-frequency = <d# 97553800>; /* Hz */
|
||||||
|
current-speed = <d# 115200>;
|
||||||
|
interrupts = <9 2>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
};
|
||||||
|
|
||||||
|
serial1: serial@4600 {
|
||||||
|
cell-index = <1>;
|
||||||
|
device_type = "serial";
|
||||||
|
compatible = "ns16550";
|
||||||
|
reg = <4600 20>;
|
||||||
|
clock-frequency = <d# 97553800>; /* Hz */
|
||||||
|
current-speed = <d# 9600>;
|
||||||
|
interrupts = <a 2>;
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
};
|
||||||
|
|
||||||
|
mpic: interrupt-controller@40000 {
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
device_type = "open-pic";
|
||||||
|
compatible = "chrp,open-pic";
|
||||||
|
interrupt-controller;
|
||||||
|
reg = <40000 40000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
pci0: pci@fe800000 {
|
||||||
|
#address-cells = <3>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
device_type = "pci";
|
||||||
|
compatible = "mpc10x-pci";
|
||||||
|
reg = <fe800000 1000>;
|
||||||
|
ranges = <01000000 0 0 fe000000 0 00c00000
|
||||||
|
02000000 0 80000000 80000000 0 70000000>;
|
||||||
|
bus-range = <0 ff>;
|
||||||
|
clock-frequency = <d# 97553800>; /* Hz */
|
||||||
|
interrupt-parent = <&mpic>;
|
||||||
|
interrupt-map-mask = <f800 0 0 7>;
|
||||||
|
interrupt-map = <
|
||||||
|
/* IDSEL 13 - IDE */
|
||||||
|
6800 0 0 1 &mpic 0 1
|
||||||
|
6800 0 0 2 &mpic 0 1
|
||||||
|
6800 0 0 3 &mpic 0 1
|
||||||
|
/* IDSEL 14 - USB */
|
||||||
|
7000 0 0 1 &mpic 0 1
|
||||||
|
7000 0 0 2 &mpic 0 1
|
||||||
|
7000 0 0 3 &mpic 0 1
|
||||||
|
7000 0 0 4 &mpic 0 1
|
||||||
|
/* IDSEL 15 - ETH */
|
||||||
|
7800 0 0 1 &mpic 0 1
|
||||||
|
7800 0 0 2 &mpic 0 1
|
||||||
|
7800 0 0 3 &mpic 0 1
|
||||||
|
7800 0 0 4 &mpic 0 1
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
linux,stdout-path = "/soc/serial@4500";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,55 @@
|
||||||
|
/*
|
||||||
|
* Embedded Planet EP8248E with PlanetCore firmware
|
||||||
|
*
|
||||||
|
* Author: Scott Wood <scottwood@freescale.com>
|
||||||
|
*
|
||||||
|
* Copyright (c) 2007 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License version 2 as published
|
||||||
|
* by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "ops.h"
|
||||||
|
#include "stdio.h"
|
||||||
|
#include "planetcore.h"
|
||||||
|
#include "pq2.h"
|
||||||
|
|
||||||
|
static char *table;
|
||||||
|
static u64 mem_size;
|
||||||
|
|
||||||
|
#include <io.h>
|
||||||
|
|
||||||
|
static void platform_fixups(void)
|
||||||
|
{
|
||||||
|
u64 val;
|
||||||
|
|
||||||
|
dt_fixup_memory(0, mem_size);
|
||||||
|
planetcore_set_mac_addrs(table);
|
||||||
|
|
||||||
|
if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) {
|
||||||
|
printf("No PlanetCore crystal frequency key.\r\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
pq2_fixup_clocks(val);
|
||||||
|
}
|
||||||
|
|
||||||
|
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||||
|
unsigned long r6, unsigned long r7)
|
||||||
|
{
|
||||||
|
table = (char *)r3;
|
||||||
|
planetcore_prepare_table(table);
|
||||||
|
|
||||||
|
if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size))
|
||||||
|
return;
|
||||||
|
|
||||||
|
mem_size *= 1024 * 1024;
|
||||||
|
simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64);
|
||||||
|
|
||||||
|
fdt_init(_dtb_start);
|
||||||
|
|
||||||
|
planetcore_set_stdout_path(table);
|
||||||
|
serial_console_init();
|
||||||
|
platform_ops.fixups = platform_fixups;
|
||||||
|
}
|
||||||
|
|
@ -159,9 +159,23 @@ static inline void *find_node_by_devtype(const void *prev,
|
||||||
return find_node_by_prop_value_str(prev, "device_type", type);
|
return find_node_by_prop_value_str(prev, "device_type", type);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static inline void *find_node_by_alias(const char *alias)
|
||||||
|
{
|
||||||
|
void *devp = finddevice("/aliases");
|
||||||
|
|
||||||
|
if (devp) {
|
||||||
|
char path[MAX_PATH_LEN];
|
||||||
|
if (getprop(devp, alias, path, MAX_PATH_LEN) > 0)
|
||||||
|
return finddevice(path);
|
||||||
|
}
|
||||||
|
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
void dt_fixup_memory(u64 start, u64 size);
|
void dt_fixup_memory(u64 start, u64 size);
|
||||||
void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq);
|
void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq);
|
||||||
void dt_fixup_clock(const char *path, u32 freq);
|
void dt_fixup_clock(const char *path, u32 freq);
|
||||||
|
void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr);
|
||||||
void dt_fixup_mac_address(u32 index, const u8 *addr);
|
void dt_fixup_mac_address(u32 index, const u8 *addr);
|
||||||
void __dt_fixup_mac_addresses(u32 startindex, ...);
|
void __dt_fixup_mac_addresses(u32 startindex, ...);
|
||||||
#define dt_fixup_mac_addresses(...) \
|
#define dt_fixup_mac_addresses(...) \
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,58 @@
|
||||||
|
/*
|
||||||
|
* RedBoot firmware support
|
||||||
|
*
|
||||||
|
* Author: Scott Wood <scottwood@freescale.com>
|
||||||
|
*
|
||||||
|
* Copyright (c) 2007 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License version 2 as published
|
||||||
|
* by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "ops.h"
|
||||||
|
#include "stdio.h"
|
||||||
|
#include "redboot.h"
|
||||||
|
#include "fsl-soc.h"
|
||||||
|
#include "io.h"
|
||||||
|
|
||||||
|
static bd_t bd;
|
||||||
|
BSS_STACK(4096);
|
||||||
|
|
||||||
|
#define MHZ(x) ((x + 500000) / 1000000)
|
||||||
|
|
||||||
|
static void platform_fixups(void)
|
||||||
|
{
|
||||||
|
void *node;
|
||||||
|
|
||||||
|
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
|
||||||
|
dt_fixup_mac_addresses(bd.bi_enetaddr);
|
||||||
|
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
|
||||||
|
|
||||||
|
node = finddevice("/soc/cpm/brg");
|
||||||
|
if (node) {
|
||||||
|
printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n",
|
||||||
|
bd.bi_busfreq, MHZ(bd.bi_busfreq));
|
||||||
|
setprop(node, "clock-frequency", &bd.bi_busfreq, 4);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||||
|
unsigned long r6, unsigned long r7)
|
||||||
|
{
|
||||||
|
memcpy(&bd, (char *)r3, sizeof(bd));
|
||||||
|
|
||||||
|
if (bd.bi_tag != 0x42444944)
|
||||||
|
return;
|
||||||
|
|
||||||
|
simple_alloc_init(_end,
|
||||||
|
bd.bi_memstart + bd.bi_memsize - (unsigned long)_end,
|
||||||
|
32, 64);
|
||||||
|
|
||||||
|
fdt_init(_dtb_start);
|
||||||
|
serial_console_init();
|
||||||
|
platform_ops.fixups = platform_fixups;
|
||||||
|
|
||||||
|
loader_info.cmdline = (char *)bd.bi_cmdline;
|
||||||
|
loader_info.cmdline_len = strlen((char *)bd.bi_cmdline);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,56 @@
|
||||||
|
#ifndef _PPC_REDBOOT_H
|
||||||
|
#define _PPC_REDBOOT_H
|
||||||
|
|
||||||
|
//=========================================================================
|
||||||
|
// include/asm-ppc/redboot.h
|
||||||
|
// Copyright (c) 2002, 2003 Gary Thomas (<gary@mlbassoc.com>
|
||||||
|
// Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
|
||||||
|
|
||||||
|
//
|
||||||
|
// Board specific details, as provided by RedBoot
|
||||||
|
//
|
||||||
|
|
||||||
|
/* A Board Information structure that is given to a program when
|
||||||
|
* RedBoot starts it up. Note: not all fields make sense for all
|
||||||
|
* architectures and it's up to the platform specific code to fill
|
||||||
|
* in the details.
|
||||||
|
*/
|
||||||
|
typedef struct bd_info {
|
||||||
|
unsigned int bi_tag; /* Should be 0x42444944 "BDID" */
|
||||||
|
unsigned int bi_size; /* Size of this structure */
|
||||||
|
unsigned int bi_revision; /* revision of this structure */
|
||||||
|
unsigned int bi_bdate; /* bootstrap date, i.e. 0x19971106 */
|
||||||
|
unsigned int bi_memstart; /* Memory start address */
|
||||||
|
unsigned int bi_memsize; /* Memory (end) size in bytes */
|
||||||
|
unsigned int bi_intfreq; /* Internal Freq, in Hz */
|
||||||
|
unsigned int bi_busfreq; /* Bus Freq, in Hz */
|
||||||
|
unsigned int bi_cpmfreq; /* CPM Freq, in Hz */
|
||||||
|
unsigned int bi_brgfreq; /* BRG Freq, in Hz */
|
||||||
|
unsigned int bi_vco; /* VCO Out from PLL */
|
||||||
|
unsigned int bi_pci_freq; /* PCI Freq, in Hz */
|
||||||
|
unsigned int bi_baudrate; /* Default console baud rate */
|
||||||
|
unsigned int bi_immr; /* IMMR when called from boot rom */
|
||||||
|
unsigned char bi_enetaddr[6];
|
||||||
|
unsigned int bi_flashbase; /* Physical address of FLASH memory */
|
||||||
|
unsigned int bi_flashsize; /* Length of FLASH memory */
|
||||||
|
int bi_flashwidth; /* Width (8,16,32,64) */
|
||||||
|
unsigned char *bi_cmdline; /* Pointer to command line */
|
||||||
|
unsigned char bi_esa[3][6]; /* Ethernet station addresses */
|
||||||
|
unsigned int bi_ramdisk_begin, bi_ramdisk_end;
|
||||||
|
struct { /* Information about [main] video screen */
|
||||||
|
short x_res; /* Horizontal resolution in pixels */
|
||||||
|
short y_res; /* Vertical resolution in pixels */
|
||||||
|
short bpp; /* Bits/pixel */
|
||||||
|
short mode; /* Type of pixels (packed, indexed) */
|
||||||
|
unsigned long fb; /* Pointer to frame buffer (pixel) memory */
|
||||||
|
} bi_video;
|
||||||
|
void (*bi_cputc)(char); /* Write a character to the RedBoot console */
|
||||||
|
char (*bi_cgetc)(void); /* Read a character from the RedBoot console */
|
||||||
|
int (*bi_ctstc)(void); /* Test for input on the RedBoot console */
|
||||||
|
} bd_t;
|
||||||
|
|
||||||
|
#define BI_REV 0x0102 /* Version 1.02 */
|
||||||
|
|
||||||
|
#define bi_pci_busfreq bi_pci_freq
|
||||||
|
#define bi_immr_base bi_immr
|
||||||
|
#endif
|
||||||
|
|
@ -168,7 +168,7 @@ ps3)
|
||||||
ksection=.kernel:vmlinux.bin
|
ksection=.kernel:vmlinux.bin
|
||||||
isection=.kernel:initrd
|
isection=.kernel:initrd
|
||||||
;;
|
;;
|
||||||
ep88xc|ep405)
|
ep88xc|ep405|redboot*|ep8248e)
|
||||||
platformo="$object/fixed-head.o $object/$platform.o"
|
platformo="$object/fixed-head.o $object/$platform.o"
|
||||||
binary=y
|
binary=y
|
||||||
;;
|
;;
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,798 @@
|
||||||
|
#
|
||||||
|
# Automatically generated make config: don't edit
|
||||||
|
# Linux kernel version: 2.6.24-rc6
|
||||||
|
# Thu Jan 17 16:17:38 2008
|
||||||
|
#
|
||||||
|
# CONFIG_PPC64 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Processor support
|
||||||
|
#
|
||||||
|
# CONFIG_6xx is not set
|
||||||
|
# CONFIG_PPC_85xx is not set
|
||||||
|
CONFIG_PPC_8xx=y
|
||||||
|
# CONFIG_40x is not set
|
||||||
|
# CONFIG_44x is not set
|
||||||
|
# CONFIG_E200 is not set
|
||||||
|
CONFIG_8xx=y
|
||||||
|
# CONFIG_PPC_MM_SLICES is not set
|
||||||
|
CONFIG_NOT_COHERENT_CACHE=y
|
||||||
|
CONFIG_PPC32=y
|
||||||
|
CONFIG_WORD_SIZE=32
|
||||||
|
CONFIG_PPC_MERGE=y
|
||||||
|
CONFIG_MMU=y
|
||||||
|
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||||
|
CONFIG_GENERIC_TIME=y
|
||||||
|
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||||
|
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||||
|
CONFIG_GENERIC_HARDIRQS=y
|
||||||
|
CONFIG_IRQ_PER_CPU=y
|
||||||
|
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||||
|
CONFIG_ARCH_HAS_ILOG2_U32=y
|
||||||
|
CONFIG_GENERIC_HWEIGHT=y
|
||||||
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||||
|
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||||
|
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
|
||||||
|
CONFIG_PPC=y
|
||||||
|
CONFIG_EARLY_PRINTK=y
|
||||||
|
CONFIG_GENERIC_NVRAM=y
|
||||||
|
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||||
|
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
||||||
|
CONFIG_PPC_OF=y
|
||||||
|
CONFIG_OF=y
|
||||||
|
# CONFIG_PPC_UDBG_16550 is not set
|
||||||
|
# CONFIG_GENERIC_TBSYNC is not set
|
||||||
|
CONFIG_AUDIT_ARCH=y
|
||||||
|
CONFIG_GENERIC_BUG=y
|
||||||
|
# CONFIG_DEFAULT_UIMAGE is not set
|
||||||
|
CONFIG_REDBOOT=y
|
||||||
|
# CONFIG_PPC_DCR_NATIVE is not set
|
||||||
|
# CONFIG_PPC_DCR_MMIO is not set
|
||||||
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||||
|
|
||||||
|
#
|
||||||
|
# General setup
|
||||||
|
#
|
||||||
|
CONFIG_EXPERIMENTAL=y
|
||||||
|
CONFIG_BROKEN_ON_SMP=y
|
||||||
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||||
|
CONFIG_LOCALVERSION=""
|
||||||
|
CONFIG_LOCALVERSION_AUTO=y
|
||||||
|
# CONFIG_SWAP is not set
|
||||||
|
CONFIG_SYSVIPC=y
|
||||||
|
CONFIG_SYSVIPC_SYSCTL=y
|
||||||
|
# CONFIG_POSIX_MQUEUE is not set
|
||||||
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||||
|
# CONFIG_TASKSTATS is not set
|
||||||
|
# CONFIG_USER_NS is not set
|
||||||
|
# CONFIG_PID_NS is not set
|
||||||
|
# CONFIG_AUDIT is not set
|
||||||
|
# CONFIG_IKCONFIG is not set
|
||||||
|
CONFIG_LOG_BUF_SHIFT=14
|
||||||
|
# CONFIG_CGROUPS is not set
|
||||||
|
CONFIG_FAIR_GROUP_SCHED=y
|
||||||
|
CONFIG_FAIR_USER_SCHED=y
|
||||||
|
# CONFIG_FAIR_CGROUP_SCHED is not set
|
||||||
|
CONFIG_SYSFS_DEPRECATED=y
|
||||||
|
# CONFIG_RELAY is not set
|
||||||
|
# CONFIG_BLK_DEV_INITRD is not set
|
||||||
|
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||||
|
CONFIG_SYSCTL=y
|
||||||
|
CONFIG_EMBEDDED=y
|
||||||
|
# CONFIG_SYSCTL_SYSCALL is not set
|
||||||
|
CONFIG_KALLSYMS=y
|
||||||
|
# CONFIG_KALLSYMS_ALL is not set
|
||||||
|
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||||
|
CONFIG_HOTPLUG=y
|
||||||
|
CONFIG_PRINTK=y
|
||||||
|
CONFIG_BUG=y
|
||||||
|
# CONFIG_ELF_CORE is not set
|
||||||
|
# CONFIG_BASE_FULL is not set
|
||||||
|
# CONFIG_FUTEX is not set
|
||||||
|
CONFIG_ANON_INODES=y
|
||||||
|
CONFIG_EPOLL=y
|
||||||
|
CONFIG_SIGNALFD=y
|
||||||
|
CONFIG_EVENTFD=y
|
||||||
|
CONFIG_SHMEM=y
|
||||||
|
# CONFIG_VM_EVENT_COUNTERS is not set
|
||||||
|
CONFIG_SLUB_DEBUG=y
|
||||||
|
# CONFIG_SLAB is not set
|
||||||
|
CONFIG_SLUB=y
|
||||||
|
# CONFIG_SLOB is not set
|
||||||
|
# CONFIG_TINY_SHMEM is not set
|
||||||
|
CONFIG_BASE_SMALL=1
|
||||||
|
# CONFIG_MODULES is not set
|
||||||
|
CONFIG_BLOCK=y
|
||||||
|
# CONFIG_LBD is not set
|
||||||
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||||
|
# CONFIG_LSF is not set
|
||||||
|
# CONFIG_BLK_DEV_BSG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# IO Schedulers
|
||||||
|
#
|
||||||
|
CONFIG_IOSCHED_NOOP=y
|
||||||
|
# CONFIG_IOSCHED_AS is not set
|
||||||
|
CONFIG_IOSCHED_DEADLINE=y
|
||||||
|
# CONFIG_IOSCHED_CFQ is not set
|
||||||
|
# CONFIG_DEFAULT_AS is not set
|
||||||
|
CONFIG_DEFAULT_DEADLINE=y
|
||||||
|
# CONFIG_DEFAULT_CFQ is not set
|
||||||
|
# CONFIG_DEFAULT_NOOP is not set
|
||||||
|
CONFIG_DEFAULT_IOSCHED="deadline"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Platform support
|
||||||
|
#
|
||||||
|
# CONFIG_PPC_MPC52xx is not set
|
||||||
|
# CONFIG_PPC_MPC5200 is not set
|
||||||
|
# CONFIG_PPC_CELL is not set
|
||||||
|
# CONFIG_PPC_CELL_NATIVE is not set
|
||||||
|
CONFIG_CPM1=y
|
||||||
|
# CONFIG_MPC8XXFADS is not set
|
||||||
|
# CONFIG_MPC86XADS is not set
|
||||||
|
# CONFIG_MPC885ADS is not set
|
||||||
|
# CONFIG_PPC_EP88XC is not set
|
||||||
|
CONFIG_PPC_ADDER875=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# MPC8xx CPM Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Generic MPC8xx Options
|
||||||
|
#
|
||||||
|
CONFIG_8xx_COPYBACK=y
|
||||||
|
# CONFIG_8xx_CPU6 is not set
|
||||||
|
CONFIG_8xx_CPU15=y
|
||||||
|
CONFIG_NO_UCODE_PATCH=y
|
||||||
|
# CONFIG_USB_SOF_UCODE_PATCH is not set
|
||||||
|
# CONFIG_I2C_SPI_UCODE_PATCH is not set
|
||||||
|
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
|
||||||
|
# CONFIG_PQ2ADS is not set
|
||||||
|
# CONFIG_MPIC is not set
|
||||||
|
# CONFIG_MPIC_WEIRD is not set
|
||||||
|
# CONFIG_PPC_I8259 is not set
|
||||||
|
# CONFIG_PPC_RTAS is not set
|
||||||
|
# CONFIG_MMIO_NVRAM is not set
|
||||||
|
# CONFIG_PPC_MPC106 is not set
|
||||||
|
# CONFIG_PPC_970_NAP is not set
|
||||||
|
# CONFIG_PPC_INDIRECT_IO is not set
|
||||||
|
# CONFIG_GENERIC_IOMAP is not set
|
||||||
|
# CONFIG_CPU_FREQ is not set
|
||||||
|
# CONFIG_CPM2 is not set
|
||||||
|
CONFIG_PPC_CPM_NEW_BINDING=y
|
||||||
|
# CONFIG_FSL_ULI1575 is not set
|
||||||
|
CONFIG_CPM=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Kernel options
|
||||||
|
#
|
||||||
|
# CONFIG_HIGHMEM is not set
|
||||||
|
# CONFIG_TICK_ONESHOT is not set
|
||||||
|
# CONFIG_NO_HZ is not set
|
||||||
|
# CONFIG_HIGH_RES_TIMERS is not set
|
||||||
|
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||||
|
# CONFIG_HZ_100 is not set
|
||||||
|
# CONFIG_HZ_250 is not set
|
||||||
|
# CONFIG_HZ_300 is not set
|
||||||
|
CONFIG_HZ_1000=y
|
||||||
|
CONFIG_HZ=1000
|
||||||
|
CONFIG_PREEMPT_NONE=y
|
||||||
|
# CONFIG_PREEMPT_VOLUNTARY is not set
|
||||||
|
# CONFIG_PREEMPT is not set
|
||||||
|
CONFIG_BINFMT_ELF=y
|
||||||
|
# CONFIG_BINFMT_MISC is not set
|
||||||
|
# CONFIG_MATH_EMULATION is not set
|
||||||
|
# CONFIG_8XX_MINIMAL_FPEMU is not set
|
||||||
|
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
||||||
|
CONFIG_ARCH_FLATMEM_ENABLE=y
|
||||||
|
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||||
|
CONFIG_SELECT_MEMORY_MODEL=y
|
||||||
|
CONFIG_FLATMEM_MANUAL=y
|
||||||
|
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||||
|
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||||
|
CONFIG_FLATMEM=y
|
||||||
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||||
|
# CONFIG_SPARSEMEM_STATIC is not set
|
||||||
|
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||||
|
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||||
|
# CONFIG_RESOURCES_64BIT is not set
|
||||||
|
CONFIG_ZONE_DMA_FLAG=1
|
||||||
|
CONFIG_BOUNCE=y
|
||||||
|
CONFIG_VIRT_TO_BUS=y
|
||||||
|
# CONFIG_PROC_DEVICETREE is not set
|
||||||
|
# CONFIG_CMDLINE_BOOL is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
CONFIG_SUSPEND_UP_POSSIBLE=y
|
||||||
|
CONFIG_HIBERNATION_UP_POSSIBLE=y
|
||||||
|
# CONFIG_SECCOMP is not set
|
||||||
|
CONFIG_WANT_DEVICE_TREE=y
|
||||||
|
CONFIG_DEVICE_TREE="adder875-redboot.dts"
|
||||||
|
CONFIG_ISA_DMA_API=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Bus options
|
||||||
|
#
|
||||||
|
CONFIG_ZONE_DMA=y
|
||||||
|
CONFIG_FSL_SOC=y
|
||||||
|
# CONFIG_PCI is not set
|
||||||
|
# CONFIG_PCI_DOMAINS is not set
|
||||||
|
# CONFIG_PCI_SYSCALL is not set
|
||||||
|
# CONFIG_PCI_QSPAN is not set
|
||||||
|
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||||
|
# CONFIG_PCCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Advanced setup
|
||||||
|
#
|
||||||
|
# CONFIG_ADVANCED_OPTIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Default settings for advanced configuration options are used
|
||||||
|
#
|
||||||
|
CONFIG_HIGHMEM_START=0xfe000000
|
||||||
|
CONFIG_LOWMEM_SIZE=0x30000000
|
||||||
|
CONFIG_KERNEL_START=0xc0000000
|
||||||
|
CONFIG_TASK_SIZE=0x80000000
|
||||||
|
CONFIG_CONSISTENT_START=0xfd000000
|
||||||
|
CONFIG_CONSISTENT_SIZE=0x00200000
|
||||||
|
CONFIG_BOOT_LOAD=0x00400000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking
|
||||||
|
#
|
||||||
|
CONFIG_NET=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking options
|
||||||
|
#
|
||||||
|
CONFIG_PACKET=y
|
||||||
|
# CONFIG_PACKET_MMAP is not set
|
||||||
|
CONFIG_UNIX=y
|
||||||
|
# CONFIG_NET_KEY is not set
|
||||||
|
CONFIG_INET=y
|
||||||
|
CONFIG_IP_MULTICAST=y
|
||||||
|
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||||
|
CONFIG_IP_FIB_HASH=y
|
||||||
|
CONFIG_IP_PNP=y
|
||||||
|
# CONFIG_IP_PNP_DHCP is not set
|
||||||
|
# CONFIG_IP_PNP_BOOTP is not set
|
||||||
|
# CONFIG_IP_PNP_RARP is not set
|
||||||
|
# CONFIG_NET_IPIP is not set
|
||||||
|
# CONFIG_NET_IPGRE is not set
|
||||||
|
# CONFIG_IP_MROUTE is not set
|
||||||
|
# CONFIG_ARPD is not set
|
||||||
|
CONFIG_SYN_COOKIES=y
|
||||||
|
# CONFIG_INET_AH is not set
|
||||||
|
# CONFIG_INET_ESP is not set
|
||||||
|
# CONFIG_INET_IPCOMP is not set
|
||||||
|
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||||
|
# CONFIG_INET_TUNNEL is not set
|
||||||
|
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||||
|
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||||
|
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||||
|
# CONFIG_INET_LRO is not set
|
||||||
|
CONFIG_INET_DIAG=y
|
||||||
|
CONFIG_INET_TCP_DIAG=y
|
||||||
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||||
|
CONFIG_TCP_CONG_CUBIC=y
|
||||||
|
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||||
|
# CONFIG_TCP_MD5SIG is not set
|
||||||
|
# CONFIG_IPV6 is not set
|
||||||
|
# CONFIG_INET6_XFRM_TUNNEL is not set
|
||||||
|
# CONFIG_INET6_TUNNEL is not set
|
||||||
|
# CONFIG_NETWORK_SECMARK is not set
|
||||||
|
# CONFIG_NETFILTER is not set
|
||||||
|
# CONFIG_IP_DCCP is not set
|
||||||
|
# CONFIG_IP_SCTP is not set
|
||||||
|
# CONFIG_TIPC is not set
|
||||||
|
# CONFIG_ATM is not set
|
||||||
|
# CONFIG_BRIDGE is not set
|
||||||
|
# CONFIG_VLAN_8021Q is not set
|
||||||
|
# CONFIG_DECNET is not set
|
||||||
|
# CONFIG_LLC2 is not set
|
||||||
|
# CONFIG_IPX is not set
|
||||||
|
# CONFIG_ATALK is not set
|
||||||
|
# CONFIG_X25 is not set
|
||||||
|
# CONFIG_LAPB is not set
|
||||||
|
# CONFIG_ECONET is not set
|
||||||
|
# CONFIG_WAN_ROUTER is not set
|
||||||
|
# CONFIG_NET_SCHED is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network testing
|
||||||
|
#
|
||||||
|
# CONFIG_NET_PKTGEN is not set
|
||||||
|
# CONFIG_HAMRADIO is not set
|
||||||
|
# CONFIG_IRDA is not set
|
||||||
|
# CONFIG_BT is not set
|
||||||
|
# CONFIG_AF_RXRPC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Wireless
|
||||||
|
#
|
||||||
|
# CONFIG_CFG80211 is not set
|
||||||
|
# CONFIG_WIRELESS_EXT is not set
|
||||||
|
# CONFIG_MAC80211 is not set
|
||||||
|
# CONFIG_IEEE80211 is not set
|
||||||
|
# CONFIG_RFKILL is not set
|
||||||
|
# CONFIG_NET_9P is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Generic Driver Options
|
||||||
|
#
|
||||||
|
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||||
|
CONFIG_STANDALONE=y
|
||||||
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||||
|
# CONFIG_FW_LOADER is not set
|
||||||
|
# CONFIG_DEBUG_DRIVER is not set
|
||||||
|
# CONFIG_DEBUG_DEVRES is not set
|
||||||
|
# CONFIG_SYS_HYPERVISOR is not set
|
||||||
|
# CONFIG_CONNECTOR is not set
|
||||||
|
CONFIG_MTD=y
|
||||||
|
# CONFIG_MTD_DEBUG is not set
|
||||||
|
# CONFIG_MTD_CONCAT is not set
|
||||||
|
# CONFIG_MTD_PARTITIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# User Modules And Translation Layers
|
||||||
|
#
|
||||||
|
CONFIG_MTD_CHAR=y
|
||||||
|
CONFIG_MTD_BLKDEVS=y
|
||||||
|
CONFIG_MTD_BLOCK=y
|
||||||
|
# CONFIG_FTL is not set
|
||||||
|
# CONFIG_NFTL is not set
|
||||||
|
# CONFIG_INFTL is not set
|
||||||
|
# CONFIG_RFD_FTL is not set
|
||||||
|
# CONFIG_SSFDC is not set
|
||||||
|
# CONFIG_MTD_OOPS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAM/ROM/Flash chip drivers
|
||||||
|
#
|
||||||
|
CONFIG_MTD_CFI=y
|
||||||
|
# CONFIG_MTD_JEDECPROBE is not set
|
||||||
|
CONFIG_MTD_GEN_PROBE=y
|
||||||
|
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||||
|
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||||
|
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||||
|
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||||
|
CONFIG_MTD_CFI_I1=y
|
||||||
|
CONFIG_MTD_CFI_I2=y
|
||||||
|
# CONFIG_MTD_CFI_I4 is not set
|
||||||
|
# CONFIG_MTD_CFI_I8 is not set
|
||||||
|
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||||
|
CONFIG_MTD_CFI_AMDSTD=y
|
||||||
|
# CONFIG_MTD_CFI_STAA is not set
|
||||||
|
CONFIG_MTD_CFI_UTIL=y
|
||||||
|
# CONFIG_MTD_RAM is not set
|
||||||
|
# CONFIG_MTD_ROM is not set
|
||||||
|
# CONFIG_MTD_ABSENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Mapping drivers for chip access
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||||
|
# CONFIG_MTD_PHYSMAP is not set
|
||||||
|
CONFIG_MTD_PHYSMAP_OF=y
|
||||||
|
# CONFIG_MTD_CFI_FLAGADM is not set
|
||||||
|
# CONFIG_MTD_PLATRAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Self-contained MTD device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_SLRAM is not set
|
||||||
|
# CONFIG_MTD_PHRAM is not set
|
||||||
|
# CONFIG_MTD_MTDRAM is not set
|
||||||
|
# CONFIG_MTD_BLOCK2MTD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Disk-On-Chip Device Drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_DOC2000 is not set
|
||||||
|
# CONFIG_MTD_DOC2001 is not set
|
||||||
|
# CONFIG_MTD_DOC2001PLUS is not set
|
||||||
|
# CONFIG_MTD_NAND is not set
|
||||||
|
# CONFIG_MTD_ONENAND is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# UBI - Unsorted block images
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_UBI is not set
|
||||||
|
CONFIG_OF_DEVICE=y
|
||||||
|
# CONFIG_PARPORT is not set
|
||||||
|
# CONFIG_BLK_DEV is not set
|
||||||
|
# CONFIG_MISC_DEVICES is not set
|
||||||
|
# CONFIG_IDE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SCSI device support
|
||||||
|
#
|
||||||
|
# CONFIG_RAID_ATTRS is not set
|
||||||
|
# CONFIG_SCSI is not set
|
||||||
|
# CONFIG_SCSI_DMA is not set
|
||||||
|
# CONFIG_SCSI_NETLINK is not set
|
||||||
|
# CONFIG_ATA is not set
|
||||||
|
# CONFIG_MD is not set
|
||||||
|
# CONFIG_MACINTOSH_DRIVERS is not set
|
||||||
|
CONFIG_NETDEVICES=y
|
||||||
|
# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
||||||
|
# CONFIG_DUMMY is not set
|
||||||
|
# CONFIG_BONDING is not set
|
||||||
|
# CONFIG_MACVLAN is not set
|
||||||
|
# CONFIG_EQUALIZER is not set
|
||||||
|
# CONFIG_TUN is not set
|
||||||
|
# CONFIG_VETH is not set
|
||||||
|
CONFIG_PHYLIB=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# MII PHY device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MARVELL_PHY is not set
|
||||||
|
CONFIG_DAVICOM_PHY=y
|
||||||
|
# CONFIG_QSEMI_PHY is not set
|
||||||
|
# CONFIG_LXT_PHY is not set
|
||||||
|
# CONFIG_CICADA_PHY is not set
|
||||||
|
# CONFIG_VITESSE_PHY is not set
|
||||||
|
# CONFIG_SMSC_PHY is not set
|
||||||
|
# CONFIG_BROADCOM_PHY is not set
|
||||||
|
# CONFIG_ICPLUS_PHY is not set
|
||||||
|
# CONFIG_FIXED_PHY is not set
|
||||||
|
# CONFIG_MDIO_BITBANG is not set
|
||||||
|
CONFIG_NET_ETHERNET=y
|
||||||
|
CONFIG_MII=y
|
||||||
|
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
||||||
|
# CONFIG_B44 is not set
|
||||||
|
CONFIG_FS_ENET=y
|
||||||
|
# CONFIG_FS_ENET_HAS_SCC is not set
|
||||||
|
CONFIG_FS_ENET_HAS_FEC=y
|
||||||
|
CONFIG_FS_ENET_MDIO_FEC=y
|
||||||
|
# CONFIG_NETDEV_1000 is not set
|
||||||
|
# CONFIG_NETDEV_10000 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Wireless LAN
|
||||||
|
#
|
||||||
|
# CONFIG_WLAN_PRE80211 is not set
|
||||||
|
# CONFIG_WLAN_80211 is not set
|
||||||
|
# CONFIG_WAN is not set
|
||||||
|
# CONFIG_PPP is not set
|
||||||
|
# CONFIG_SLIP is not set
|
||||||
|
# CONFIG_SHAPER is not set
|
||||||
|
# CONFIG_NETCONSOLE is not set
|
||||||
|
# CONFIG_NETPOLL is not set
|
||||||
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||||
|
# CONFIG_ISDN is not set
|
||||||
|
# CONFIG_PHONE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Input device support
|
||||||
|
#
|
||||||
|
CONFIG_INPUT=y
|
||||||
|
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||||
|
# CONFIG_INPUT_POLLDEV is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Userland interfaces
|
||||||
|
#
|
||||||
|
CONFIG_INPUT_MOUSEDEV=y
|
||||||
|
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||||
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||||
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||||
|
# CONFIG_INPUT_JOYDEV is not set
|
||||||
|
# CONFIG_INPUT_EVDEV is not set
|
||||||
|
# CONFIG_INPUT_EVBUG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Input Device Drivers
|
||||||
|
#
|
||||||
|
CONFIG_INPUT_KEYBOARD=y
|
||||||
|
CONFIG_KEYBOARD_ATKBD=y
|
||||||
|
# CONFIG_KEYBOARD_SUNKBD is not set
|
||||||
|
# CONFIG_KEYBOARD_LKKBD is not set
|
||||||
|
# CONFIG_KEYBOARD_XTKBD is not set
|
||||||
|
# CONFIG_KEYBOARD_NEWTON is not set
|
||||||
|
# CONFIG_KEYBOARD_STOWAWAY is not set
|
||||||
|
CONFIG_INPUT_MOUSE=y
|
||||||
|
CONFIG_MOUSE_PS2=y
|
||||||
|
CONFIG_MOUSE_PS2_ALPS=y
|
||||||
|
CONFIG_MOUSE_PS2_LOGIPS2PP=y
|
||||||
|
CONFIG_MOUSE_PS2_SYNAPTICS=y
|
||||||
|
CONFIG_MOUSE_PS2_LIFEBOOK=y
|
||||||
|
CONFIG_MOUSE_PS2_TRACKPOINT=y
|
||||||
|
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
|
||||||
|
# CONFIG_MOUSE_SERIAL is not set
|
||||||
|
# CONFIG_MOUSE_VSXXXAA is not set
|
||||||
|
# CONFIG_INPUT_JOYSTICK is not set
|
||||||
|
# CONFIG_INPUT_TABLET is not set
|
||||||
|
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||||
|
# CONFIG_INPUT_MISC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Hardware I/O ports
|
||||||
|
#
|
||||||
|
CONFIG_SERIO=y
|
||||||
|
CONFIG_SERIO_I8042=y
|
||||||
|
CONFIG_SERIO_SERPORT=y
|
||||||
|
CONFIG_SERIO_LIBPS2=y
|
||||||
|
# CONFIG_SERIO_RAW is not set
|
||||||
|
# CONFIG_GAMEPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Character devices
|
||||||
|
#
|
||||||
|
# CONFIG_VT is not set
|
||||||
|
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Serial drivers
|
||||||
|
#
|
||||||
|
# CONFIG_SERIAL_8250 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Non-8250 serial port support
|
||||||
|
#
|
||||||
|
# CONFIG_SERIAL_UARTLITE is not set
|
||||||
|
CONFIG_SERIAL_CORE=y
|
||||||
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||||
|
CONFIG_SERIAL_CPM=y
|
||||||
|
CONFIG_SERIAL_CPM_CONSOLE=y
|
||||||
|
# CONFIG_SERIAL_CPM_SCC1 is not set
|
||||||
|
# CONFIG_SERIAL_CPM_SCC2 is not set
|
||||||
|
# CONFIG_SERIAL_CPM_SCC3 is not set
|
||||||
|
# CONFIG_SERIAL_CPM_SCC4 is not set
|
||||||
|
CONFIG_SERIAL_CPM_SMC1=y
|
||||||
|
CONFIG_SERIAL_CPM_SMC2=y
|
||||||
|
CONFIG_UNIX98_PTYS=y
|
||||||
|
# CONFIG_LEGACY_PTYS is not set
|
||||||
|
# CONFIG_IPMI_HANDLER is not set
|
||||||
|
CONFIG_HW_RANDOM=y
|
||||||
|
# CONFIG_NVRAM is not set
|
||||||
|
CONFIG_GEN_RTC=y
|
||||||
|
# CONFIG_GEN_RTC_X is not set
|
||||||
|
# CONFIG_R3964 is not set
|
||||||
|
# CONFIG_RAW_DRIVER is not set
|
||||||
|
# CONFIG_TCG_TPM is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI support
|
||||||
|
#
|
||||||
|
# CONFIG_SPI is not set
|
||||||
|
# CONFIG_SPI_MASTER is not set
|
||||||
|
# CONFIG_W1 is not set
|
||||||
|
# CONFIG_POWER_SUPPLY is not set
|
||||||
|
# CONFIG_HWMON is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sonics Silicon Backplane
|
||||||
|
#
|
||||||
|
CONFIG_SSB_POSSIBLE=y
|
||||||
|
# CONFIG_SSB is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Multifunction device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MFD_SM501 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Multimedia devices
|
||||||
|
#
|
||||||
|
# CONFIG_VIDEO_DEV is not set
|
||||||
|
# CONFIG_DVB_CORE is not set
|
||||||
|
CONFIG_DAB=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics support
|
||||||
|
#
|
||||||
|
# CONFIG_VGASTATE is not set
|
||||||
|
CONFIG_VIDEO_OUTPUT_CONTROL=y
|
||||||
|
# CONFIG_FB is not set
|
||||||
|
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Display device support
|
||||||
|
#
|
||||||
|
# CONFIG_DISPLAY_SUPPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sound
|
||||||
|
#
|
||||||
|
# CONFIG_SOUND is not set
|
||||||
|
# CONFIG_HID_SUPPORT is not set
|
||||||
|
# CONFIG_USB_SUPPORT is not set
|
||||||
|
# CONFIG_MMC is not set
|
||||||
|
# CONFIG_NEW_LEDS is not set
|
||||||
|
# CONFIG_EDAC is not set
|
||||||
|
# CONFIG_RTC_CLASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Userspace I/O
|
||||||
|
#
|
||||||
|
# CONFIG_UIO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File systems
|
||||||
|
#
|
||||||
|
# CONFIG_EXT2_FS is not set
|
||||||
|
# CONFIG_EXT3_FS is not set
|
||||||
|
# CONFIG_EXT4DEV_FS is not set
|
||||||
|
# CONFIG_REISERFS_FS is not set
|
||||||
|
# CONFIG_JFS_FS is not set
|
||||||
|
# CONFIG_FS_POSIX_ACL is not set
|
||||||
|
# CONFIG_XFS_FS is not set
|
||||||
|
# CONFIG_GFS2_FS is not set
|
||||||
|
# CONFIG_OCFS2_FS is not set
|
||||||
|
# CONFIG_MINIX_FS is not set
|
||||||
|
# CONFIG_ROMFS_FS is not set
|
||||||
|
# CONFIG_INOTIFY is not set
|
||||||
|
# CONFIG_QUOTA is not set
|
||||||
|
# CONFIG_DNOTIFY is not set
|
||||||
|
# CONFIG_AUTOFS_FS is not set
|
||||||
|
# CONFIG_AUTOFS4_FS is not set
|
||||||
|
# CONFIG_FUSE_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# CD-ROM/DVD Filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_ISO9660_FS is not set
|
||||||
|
# CONFIG_UDF_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# DOS/FAT/NT Filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_MSDOS_FS is not set
|
||||||
|
# CONFIG_VFAT_FS is not set
|
||||||
|
# CONFIG_NTFS_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Pseudo filesystems
|
||||||
|
#
|
||||||
|
CONFIG_PROC_FS=y
|
||||||
|
# CONFIG_PROC_KCORE is not set
|
||||||
|
CONFIG_PROC_SYSCTL=y
|
||||||
|
CONFIG_SYSFS=y
|
||||||
|
CONFIG_TMPFS=y
|
||||||
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
||||||
|
# CONFIG_HUGETLB_PAGE is not set
|
||||||
|
# CONFIG_CONFIGFS_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Miscellaneous filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_ADFS_FS is not set
|
||||||
|
# CONFIG_AFFS_FS is not set
|
||||||
|
# CONFIG_HFS_FS is not set
|
||||||
|
# CONFIG_HFSPLUS_FS is not set
|
||||||
|
# CONFIG_BEFS_FS is not set
|
||||||
|
# CONFIG_BFS_FS is not set
|
||||||
|
# CONFIG_EFS_FS is not set
|
||||||
|
# CONFIG_JFFS2_FS is not set
|
||||||
|
CONFIG_CRAMFS=y
|
||||||
|
# CONFIG_VXFS_FS is not set
|
||||||
|
# CONFIG_HPFS_FS is not set
|
||||||
|
# CONFIG_QNX4FS_FS is not set
|
||||||
|
# CONFIG_SYSV_FS is not set
|
||||||
|
# CONFIG_UFS_FS is not set
|
||||||
|
CONFIG_NETWORK_FILESYSTEMS=y
|
||||||
|
CONFIG_NFS_FS=y
|
||||||
|
CONFIG_NFS_V3=y
|
||||||
|
# CONFIG_NFS_V3_ACL is not set
|
||||||
|
# CONFIG_NFS_V4 is not set
|
||||||
|
# CONFIG_NFS_DIRECTIO is not set
|
||||||
|
# CONFIG_NFSD is not set
|
||||||
|
CONFIG_ROOT_NFS=y
|
||||||
|
CONFIG_LOCKD=y
|
||||||
|
CONFIG_LOCKD_V4=y
|
||||||
|
CONFIG_NFS_COMMON=y
|
||||||
|
CONFIG_SUNRPC=y
|
||||||
|
# CONFIG_SUNRPC_BIND34 is not set
|
||||||
|
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||||
|
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||||
|
# CONFIG_SMB_FS is not set
|
||||||
|
# CONFIG_CIFS is not set
|
||||||
|
# CONFIG_NCP_FS is not set
|
||||||
|
# CONFIG_CODA_FS is not set
|
||||||
|
# CONFIG_AFS_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Partition Types
|
||||||
|
#
|
||||||
|
CONFIG_PARTITION_ADVANCED=y
|
||||||
|
# CONFIG_ACORN_PARTITION is not set
|
||||||
|
# CONFIG_OSF_PARTITION is not set
|
||||||
|
# CONFIG_AMIGA_PARTITION is not set
|
||||||
|
# CONFIG_ATARI_PARTITION is not set
|
||||||
|
# CONFIG_MAC_PARTITION is not set
|
||||||
|
CONFIG_MSDOS_PARTITION=y
|
||||||
|
# CONFIG_BSD_DISKLABEL is not set
|
||||||
|
# CONFIG_MINIX_SUBPARTITION is not set
|
||||||
|
# CONFIG_SOLARIS_X86_PARTITION is not set
|
||||||
|
# CONFIG_UNIXWARE_DISKLABEL is not set
|
||||||
|
# CONFIG_LDM_PARTITION is not set
|
||||||
|
# CONFIG_SGI_PARTITION is not set
|
||||||
|
# CONFIG_ULTRIX_PARTITION is not set
|
||||||
|
# CONFIG_SUN_PARTITION is not set
|
||||||
|
# CONFIG_KARMA_PARTITION is not set
|
||||||
|
# CONFIG_EFI_PARTITION is not set
|
||||||
|
# CONFIG_SYSV68_PARTITION is not set
|
||||||
|
# CONFIG_NLS is not set
|
||||||
|
# CONFIG_DLM is not set
|
||||||
|
# CONFIG_UCC_SLOW is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library routines
|
||||||
|
#
|
||||||
|
# CONFIG_CRC_CCITT is not set
|
||||||
|
# CONFIG_CRC16 is not set
|
||||||
|
# CONFIG_CRC_ITU_T is not set
|
||||||
|
# CONFIG_CRC32 is not set
|
||||||
|
# CONFIG_CRC7 is not set
|
||||||
|
# CONFIG_LIBCRC32C is not set
|
||||||
|
CONFIG_ZLIB_INFLATE=y
|
||||||
|
CONFIG_HAS_IOMEM=y
|
||||||
|
CONFIG_HAS_IOPORT=y
|
||||||
|
CONFIG_HAS_DMA=y
|
||||||
|
CONFIG_INSTRUMENTATION=y
|
||||||
|
# CONFIG_PROFILING is not set
|
||||||
|
# CONFIG_MARKERS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Kernel hacking
|
||||||
|
#
|
||||||
|
# CONFIG_PRINTK_TIME is not set
|
||||||
|
CONFIG_ENABLE_WARN_DEPRECATED=y
|
||||||
|
CONFIG_ENABLE_MUST_CHECK=y
|
||||||
|
CONFIG_MAGIC_SYSRQ=y
|
||||||
|
# CONFIG_UNUSED_SYMBOLS is not set
|
||||||
|
# CONFIG_DEBUG_FS is not set
|
||||||
|
# CONFIG_HEADERS_CHECK is not set
|
||||||
|
CONFIG_DEBUG_KERNEL=y
|
||||||
|
# CONFIG_DEBUG_SHIRQ is not set
|
||||||
|
CONFIG_DETECT_SOFTLOCKUP=y
|
||||||
|
CONFIG_SCHED_DEBUG=y
|
||||||
|
# CONFIG_SCHEDSTATS is not set
|
||||||
|
# CONFIG_TIMER_STATS is not set
|
||||||
|
# CONFIG_SLUB_DEBUG_ON is not set
|
||||||
|
# CONFIG_DEBUG_SPINLOCK is not set
|
||||||
|
# CONFIG_DEBUG_MUTEXES is not set
|
||||||
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||||
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||||
|
# CONFIG_DEBUG_KOBJECT is not set
|
||||||
|
CONFIG_DEBUG_BUGVERBOSE=y
|
||||||
|
CONFIG_DEBUG_INFO=y
|
||||||
|
# CONFIG_DEBUG_VM is not set
|
||||||
|
# CONFIG_DEBUG_LIST is not set
|
||||||
|
# CONFIG_DEBUG_SG is not set
|
||||||
|
CONFIG_FORCED_INLINING=y
|
||||||
|
# CONFIG_BOOT_PRINTK_DELAY is not set
|
||||||
|
# CONFIG_FAULT_INJECTION is not set
|
||||||
|
# CONFIG_SAMPLES is not set
|
||||||
|
# CONFIG_DEBUG_STACKOVERFLOW is not set
|
||||||
|
# CONFIG_DEBUG_STACK_USAGE is not set
|
||||||
|
# CONFIG_DEBUG_PAGEALLOC is not set
|
||||||
|
# CONFIG_DEBUGGER is not set
|
||||||
|
# CONFIG_BDI_SWITCH is not set
|
||||||
|
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Security options
|
||||||
|
#
|
||||||
|
# CONFIG_KEYS is not set
|
||||||
|
# CONFIG_SECURITY is not set
|
||||||
|
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
||||||
|
# CONFIG_CRYPTO is not set
|
||||||
|
# CONFIG_PPC_CLOCK is not set
|
||||||
|
CONFIG_PPC_LIB_RHEAP=y
|
||||||
|
|
@ -0,0 +1,798 @@
|
||||||
|
#
|
||||||
|
# Automatically generated make config: don't edit
|
||||||
|
# Linux kernel version: 2.6.24-rc6
|
||||||
|
# Thu Jan 17 16:17:18 2008
|
||||||
|
#
|
||||||
|
# CONFIG_PPC64 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Processor support
|
||||||
|
#
|
||||||
|
# CONFIG_6xx is not set
|
||||||
|
# CONFIG_PPC_85xx is not set
|
||||||
|
CONFIG_PPC_8xx=y
|
||||||
|
# CONFIG_40x is not set
|
||||||
|
# CONFIG_44x is not set
|
||||||
|
# CONFIG_E200 is not set
|
||||||
|
CONFIG_8xx=y
|
||||||
|
# CONFIG_PPC_MM_SLICES is not set
|
||||||
|
CONFIG_NOT_COHERENT_CACHE=y
|
||||||
|
CONFIG_PPC32=y
|
||||||
|
CONFIG_WORD_SIZE=32
|
||||||
|
CONFIG_PPC_MERGE=y
|
||||||
|
CONFIG_MMU=y
|
||||||
|
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||||
|
CONFIG_GENERIC_TIME=y
|
||||||
|
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||||
|
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||||
|
CONFIG_GENERIC_HARDIRQS=y
|
||||||
|
CONFIG_IRQ_PER_CPU=y
|
||||||
|
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||||
|
CONFIG_ARCH_HAS_ILOG2_U32=y
|
||||||
|
CONFIG_GENERIC_HWEIGHT=y
|
||||||
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||||
|
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||||
|
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
|
||||||
|
CONFIG_PPC=y
|
||||||
|
CONFIG_EARLY_PRINTK=y
|
||||||
|
CONFIG_GENERIC_NVRAM=y
|
||||||
|
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||||
|
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
||||||
|
CONFIG_PPC_OF=y
|
||||||
|
CONFIG_OF=y
|
||||||
|
# CONFIG_PPC_UDBG_16550 is not set
|
||||||
|
# CONFIG_GENERIC_TBSYNC is not set
|
||||||
|
CONFIG_AUDIT_ARCH=y
|
||||||
|
CONFIG_GENERIC_BUG=y
|
||||||
|
# CONFIG_DEFAULT_UIMAGE is not set
|
||||||
|
CONFIG_REDBOOT=y
|
||||||
|
# CONFIG_PPC_DCR_NATIVE is not set
|
||||||
|
# CONFIG_PPC_DCR_MMIO is not set
|
||||||
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||||
|
|
||||||
|
#
|
||||||
|
# General setup
|
||||||
|
#
|
||||||
|
CONFIG_EXPERIMENTAL=y
|
||||||
|
CONFIG_BROKEN_ON_SMP=y
|
||||||
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||||
|
CONFIG_LOCALVERSION=""
|
||||||
|
CONFIG_LOCALVERSION_AUTO=y
|
||||||
|
# CONFIG_SWAP is not set
|
||||||
|
CONFIG_SYSVIPC=y
|
||||||
|
CONFIG_SYSVIPC_SYSCTL=y
|
||||||
|
# CONFIG_POSIX_MQUEUE is not set
|
||||||
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||||
|
# CONFIG_TASKSTATS is not set
|
||||||
|
# CONFIG_USER_NS is not set
|
||||||
|
# CONFIG_PID_NS is not set
|
||||||
|
# CONFIG_AUDIT is not set
|
||||||
|
# CONFIG_IKCONFIG is not set
|
||||||
|
CONFIG_LOG_BUF_SHIFT=14
|
||||||
|
# CONFIG_CGROUPS is not set
|
||||||
|
CONFIG_FAIR_GROUP_SCHED=y
|
||||||
|
CONFIG_FAIR_USER_SCHED=y
|
||||||
|
# CONFIG_FAIR_CGROUP_SCHED is not set
|
||||||
|
CONFIG_SYSFS_DEPRECATED=y
|
||||||
|
# CONFIG_RELAY is not set
|
||||||
|
# CONFIG_BLK_DEV_INITRD is not set
|
||||||
|
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||||
|
CONFIG_SYSCTL=y
|
||||||
|
CONFIG_EMBEDDED=y
|
||||||
|
# CONFIG_SYSCTL_SYSCALL is not set
|
||||||
|
CONFIG_KALLSYMS=y
|
||||||
|
# CONFIG_KALLSYMS_ALL is not set
|
||||||
|
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||||
|
CONFIG_HOTPLUG=y
|
||||||
|
CONFIG_PRINTK=y
|
||||||
|
CONFIG_BUG=y
|
||||||
|
# CONFIG_ELF_CORE is not set
|
||||||
|
# CONFIG_BASE_FULL is not set
|
||||||
|
# CONFIG_FUTEX is not set
|
||||||
|
CONFIG_ANON_INODES=y
|
||||||
|
CONFIG_EPOLL=y
|
||||||
|
CONFIG_SIGNALFD=y
|
||||||
|
CONFIG_EVENTFD=y
|
||||||
|
CONFIG_SHMEM=y
|
||||||
|
# CONFIG_VM_EVENT_COUNTERS is not set
|
||||||
|
CONFIG_SLUB_DEBUG=y
|
||||||
|
# CONFIG_SLAB is not set
|
||||||
|
CONFIG_SLUB=y
|
||||||
|
# CONFIG_SLOB is not set
|
||||||
|
# CONFIG_TINY_SHMEM is not set
|
||||||
|
CONFIG_BASE_SMALL=1
|
||||||
|
# CONFIG_MODULES is not set
|
||||||
|
CONFIG_BLOCK=y
|
||||||
|
# CONFIG_LBD is not set
|
||||||
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||||
|
# CONFIG_LSF is not set
|
||||||
|
# CONFIG_BLK_DEV_BSG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# IO Schedulers
|
||||||
|
#
|
||||||
|
CONFIG_IOSCHED_NOOP=y
|
||||||
|
# CONFIG_IOSCHED_AS is not set
|
||||||
|
CONFIG_IOSCHED_DEADLINE=y
|
||||||
|
# CONFIG_IOSCHED_CFQ is not set
|
||||||
|
# CONFIG_DEFAULT_AS is not set
|
||||||
|
CONFIG_DEFAULT_DEADLINE=y
|
||||||
|
# CONFIG_DEFAULT_CFQ is not set
|
||||||
|
# CONFIG_DEFAULT_NOOP is not set
|
||||||
|
CONFIG_DEFAULT_IOSCHED="deadline"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Platform support
|
||||||
|
#
|
||||||
|
# CONFIG_PPC_MPC52xx is not set
|
||||||
|
# CONFIG_PPC_MPC5200 is not set
|
||||||
|
# CONFIG_PPC_CELL is not set
|
||||||
|
# CONFIG_PPC_CELL_NATIVE is not set
|
||||||
|
CONFIG_CPM1=y
|
||||||
|
# CONFIG_MPC8XXFADS is not set
|
||||||
|
# CONFIG_MPC86XADS is not set
|
||||||
|
# CONFIG_MPC885ADS is not set
|
||||||
|
# CONFIG_PPC_EP88XC is not set
|
||||||
|
CONFIG_PPC_ADDER875=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# MPC8xx CPM Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Generic MPC8xx Options
|
||||||
|
#
|
||||||
|
CONFIG_8xx_COPYBACK=y
|
||||||
|
# CONFIG_8xx_CPU6 is not set
|
||||||
|
CONFIG_8xx_CPU15=y
|
||||||
|
CONFIG_NO_UCODE_PATCH=y
|
||||||
|
# CONFIG_USB_SOF_UCODE_PATCH is not set
|
||||||
|
# CONFIG_I2C_SPI_UCODE_PATCH is not set
|
||||||
|
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
|
||||||
|
# CONFIG_PQ2ADS is not set
|
||||||
|
# CONFIG_MPIC is not set
|
||||||
|
# CONFIG_MPIC_WEIRD is not set
|
||||||
|
# CONFIG_PPC_I8259 is not set
|
||||||
|
# CONFIG_PPC_RTAS is not set
|
||||||
|
# CONFIG_MMIO_NVRAM is not set
|
||||||
|
# CONFIG_PPC_MPC106 is not set
|
||||||
|
# CONFIG_PPC_970_NAP is not set
|
||||||
|
# CONFIG_PPC_INDIRECT_IO is not set
|
||||||
|
# CONFIG_GENERIC_IOMAP is not set
|
||||||
|
# CONFIG_CPU_FREQ is not set
|
||||||
|
# CONFIG_CPM2 is not set
|
||||||
|
CONFIG_PPC_CPM_NEW_BINDING=y
|
||||||
|
# CONFIG_FSL_ULI1575 is not set
|
||||||
|
CONFIG_CPM=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Kernel options
|
||||||
|
#
|
||||||
|
# CONFIG_HIGHMEM is not set
|
||||||
|
# CONFIG_TICK_ONESHOT is not set
|
||||||
|
# CONFIG_NO_HZ is not set
|
||||||
|
# CONFIG_HIGH_RES_TIMERS is not set
|
||||||
|
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||||
|
# CONFIG_HZ_100 is not set
|
||||||
|
# CONFIG_HZ_250 is not set
|
||||||
|
# CONFIG_HZ_300 is not set
|
||||||
|
CONFIG_HZ_1000=y
|
||||||
|
CONFIG_HZ=1000
|
||||||
|
CONFIG_PREEMPT_NONE=y
|
||||||
|
# CONFIG_PREEMPT_VOLUNTARY is not set
|
||||||
|
# CONFIG_PREEMPT is not set
|
||||||
|
CONFIG_BINFMT_ELF=y
|
||||||
|
# CONFIG_BINFMT_MISC is not set
|
||||||
|
# CONFIG_MATH_EMULATION is not set
|
||||||
|
# CONFIG_8XX_MINIMAL_FPEMU is not set
|
||||||
|
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
||||||
|
CONFIG_ARCH_FLATMEM_ENABLE=y
|
||||||
|
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||||
|
CONFIG_SELECT_MEMORY_MODEL=y
|
||||||
|
CONFIG_FLATMEM_MANUAL=y
|
||||||
|
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||||
|
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||||
|
CONFIG_FLATMEM=y
|
||||||
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||||
|
# CONFIG_SPARSEMEM_STATIC is not set
|
||||||
|
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||||
|
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||||
|
# CONFIG_RESOURCES_64BIT is not set
|
||||||
|
CONFIG_ZONE_DMA_FLAG=1
|
||||||
|
CONFIG_BOUNCE=y
|
||||||
|
CONFIG_VIRT_TO_BUS=y
|
||||||
|
# CONFIG_PROC_DEVICETREE is not set
|
||||||
|
# CONFIG_CMDLINE_BOOL is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
CONFIG_SUSPEND_UP_POSSIBLE=y
|
||||||
|
CONFIG_HIBERNATION_UP_POSSIBLE=y
|
||||||
|
# CONFIG_SECCOMP is not set
|
||||||
|
CONFIG_WANT_DEVICE_TREE=y
|
||||||
|
CONFIG_DEVICE_TREE="adder875-uboot.dts"
|
||||||
|
CONFIG_ISA_DMA_API=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Bus options
|
||||||
|
#
|
||||||
|
CONFIG_ZONE_DMA=y
|
||||||
|
CONFIG_FSL_SOC=y
|
||||||
|
# CONFIG_PCI is not set
|
||||||
|
# CONFIG_PCI_DOMAINS is not set
|
||||||
|
# CONFIG_PCI_SYSCALL is not set
|
||||||
|
# CONFIG_PCI_QSPAN is not set
|
||||||
|
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||||
|
# CONFIG_PCCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Advanced setup
|
||||||
|
#
|
||||||
|
# CONFIG_ADVANCED_OPTIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Default settings for advanced configuration options are used
|
||||||
|
#
|
||||||
|
CONFIG_HIGHMEM_START=0xfe000000
|
||||||
|
CONFIG_LOWMEM_SIZE=0x30000000
|
||||||
|
CONFIG_KERNEL_START=0xc0000000
|
||||||
|
CONFIG_TASK_SIZE=0x80000000
|
||||||
|
CONFIG_CONSISTENT_START=0xfd000000
|
||||||
|
CONFIG_CONSISTENT_SIZE=0x00200000
|
||||||
|
CONFIG_BOOT_LOAD=0x00400000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking
|
||||||
|
#
|
||||||
|
CONFIG_NET=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking options
|
||||||
|
#
|
||||||
|
CONFIG_PACKET=y
|
||||||
|
# CONFIG_PACKET_MMAP is not set
|
||||||
|
CONFIG_UNIX=y
|
||||||
|
# CONFIG_NET_KEY is not set
|
||||||
|
CONFIG_INET=y
|
||||||
|
CONFIG_IP_MULTICAST=y
|
||||||
|
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||||
|
CONFIG_IP_FIB_HASH=y
|
||||||
|
CONFIG_IP_PNP=y
|
||||||
|
# CONFIG_IP_PNP_DHCP is not set
|
||||||
|
# CONFIG_IP_PNP_BOOTP is not set
|
||||||
|
# CONFIG_IP_PNP_RARP is not set
|
||||||
|
# CONFIG_NET_IPIP is not set
|
||||||
|
# CONFIG_NET_IPGRE is not set
|
||||||
|
# CONFIG_IP_MROUTE is not set
|
||||||
|
# CONFIG_ARPD is not set
|
||||||
|
CONFIG_SYN_COOKIES=y
|
||||||
|
# CONFIG_INET_AH is not set
|
||||||
|
# CONFIG_INET_ESP is not set
|
||||||
|
# CONFIG_INET_IPCOMP is not set
|
||||||
|
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||||
|
# CONFIG_INET_TUNNEL is not set
|
||||||
|
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||||
|
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||||
|
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||||
|
# CONFIG_INET_LRO is not set
|
||||||
|
CONFIG_INET_DIAG=y
|
||||||
|
CONFIG_INET_TCP_DIAG=y
|
||||||
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||||
|
CONFIG_TCP_CONG_CUBIC=y
|
||||||
|
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||||
|
# CONFIG_TCP_MD5SIG is not set
|
||||||
|
# CONFIG_IPV6 is not set
|
||||||
|
# CONFIG_INET6_XFRM_TUNNEL is not set
|
||||||
|
# CONFIG_INET6_TUNNEL is not set
|
||||||
|
# CONFIG_NETWORK_SECMARK is not set
|
||||||
|
# CONFIG_NETFILTER is not set
|
||||||
|
# CONFIG_IP_DCCP is not set
|
||||||
|
# CONFIG_IP_SCTP is not set
|
||||||
|
# CONFIG_TIPC is not set
|
||||||
|
# CONFIG_ATM is not set
|
||||||
|
# CONFIG_BRIDGE is not set
|
||||||
|
# CONFIG_VLAN_8021Q is not set
|
||||||
|
# CONFIG_DECNET is not set
|
||||||
|
# CONFIG_LLC2 is not set
|
||||||
|
# CONFIG_IPX is not set
|
||||||
|
# CONFIG_ATALK is not set
|
||||||
|
# CONFIG_X25 is not set
|
||||||
|
# CONFIG_LAPB is not set
|
||||||
|
# CONFIG_ECONET is not set
|
||||||
|
# CONFIG_WAN_ROUTER is not set
|
||||||
|
# CONFIG_NET_SCHED is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network testing
|
||||||
|
#
|
||||||
|
# CONFIG_NET_PKTGEN is not set
|
||||||
|
# CONFIG_HAMRADIO is not set
|
||||||
|
# CONFIG_IRDA is not set
|
||||||
|
# CONFIG_BT is not set
|
||||||
|
# CONFIG_AF_RXRPC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Wireless
|
||||||
|
#
|
||||||
|
# CONFIG_CFG80211 is not set
|
||||||
|
# CONFIG_WIRELESS_EXT is not set
|
||||||
|
# CONFIG_MAC80211 is not set
|
||||||
|
# CONFIG_IEEE80211 is not set
|
||||||
|
# CONFIG_RFKILL is not set
|
||||||
|
# CONFIG_NET_9P is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Generic Driver Options
|
||||||
|
#
|
||||||
|
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||||
|
CONFIG_STANDALONE=y
|
||||||
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||||
|
# CONFIG_FW_LOADER is not set
|
||||||
|
# CONFIG_DEBUG_DRIVER is not set
|
||||||
|
# CONFIG_DEBUG_DEVRES is not set
|
||||||
|
# CONFIG_SYS_HYPERVISOR is not set
|
||||||
|
# CONFIG_CONNECTOR is not set
|
||||||
|
CONFIG_MTD=y
|
||||||
|
# CONFIG_MTD_DEBUG is not set
|
||||||
|
# CONFIG_MTD_CONCAT is not set
|
||||||
|
# CONFIG_MTD_PARTITIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# User Modules And Translation Layers
|
||||||
|
#
|
||||||
|
CONFIG_MTD_CHAR=y
|
||||||
|
CONFIG_MTD_BLKDEVS=y
|
||||||
|
CONFIG_MTD_BLOCK=y
|
||||||
|
# CONFIG_FTL is not set
|
||||||
|
# CONFIG_NFTL is not set
|
||||||
|
# CONFIG_INFTL is not set
|
||||||
|
# CONFIG_RFD_FTL is not set
|
||||||
|
# CONFIG_SSFDC is not set
|
||||||
|
# CONFIG_MTD_OOPS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAM/ROM/Flash chip drivers
|
||||||
|
#
|
||||||
|
CONFIG_MTD_CFI=y
|
||||||
|
# CONFIG_MTD_JEDECPROBE is not set
|
||||||
|
CONFIG_MTD_GEN_PROBE=y
|
||||||
|
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||||
|
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||||
|
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||||
|
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||||
|
CONFIG_MTD_CFI_I1=y
|
||||||
|
CONFIG_MTD_CFI_I2=y
|
||||||
|
# CONFIG_MTD_CFI_I4 is not set
|
||||||
|
# CONFIG_MTD_CFI_I8 is not set
|
||||||
|
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||||
|
CONFIG_MTD_CFI_AMDSTD=y
|
||||||
|
# CONFIG_MTD_CFI_STAA is not set
|
||||||
|
CONFIG_MTD_CFI_UTIL=y
|
||||||
|
# CONFIG_MTD_RAM is not set
|
||||||
|
# CONFIG_MTD_ROM is not set
|
||||||
|
# CONFIG_MTD_ABSENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Mapping drivers for chip access
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||||
|
# CONFIG_MTD_PHYSMAP is not set
|
||||||
|
CONFIG_MTD_PHYSMAP_OF=y
|
||||||
|
# CONFIG_MTD_CFI_FLAGADM is not set
|
||||||
|
# CONFIG_MTD_PLATRAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Self-contained MTD device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_SLRAM is not set
|
||||||
|
# CONFIG_MTD_PHRAM is not set
|
||||||
|
# CONFIG_MTD_MTDRAM is not set
|
||||||
|
# CONFIG_MTD_BLOCK2MTD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Disk-On-Chip Device Drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_DOC2000 is not set
|
||||||
|
# CONFIG_MTD_DOC2001 is not set
|
||||||
|
# CONFIG_MTD_DOC2001PLUS is not set
|
||||||
|
# CONFIG_MTD_NAND is not set
|
||||||
|
# CONFIG_MTD_ONENAND is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# UBI - Unsorted block images
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_UBI is not set
|
||||||
|
CONFIG_OF_DEVICE=y
|
||||||
|
# CONFIG_PARPORT is not set
|
||||||
|
# CONFIG_BLK_DEV is not set
|
||||||
|
# CONFIG_MISC_DEVICES is not set
|
||||||
|
# CONFIG_IDE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SCSI device support
|
||||||
|
#
|
||||||
|
# CONFIG_RAID_ATTRS is not set
|
||||||
|
# CONFIG_SCSI is not set
|
||||||
|
# CONFIG_SCSI_DMA is not set
|
||||||
|
# CONFIG_SCSI_NETLINK is not set
|
||||||
|
# CONFIG_ATA is not set
|
||||||
|
# CONFIG_MD is not set
|
||||||
|
# CONFIG_MACINTOSH_DRIVERS is not set
|
||||||
|
CONFIG_NETDEVICES=y
|
||||||
|
# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
||||||
|
# CONFIG_DUMMY is not set
|
||||||
|
# CONFIG_BONDING is not set
|
||||||
|
# CONFIG_MACVLAN is not set
|
||||||
|
# CONFIG_EQUALIZER is not set
|
||||||
|
# CONFIG_TUN is not set
|
||||||
|
# CONFIG_VETH is not set
|
||||||
|
CONFIG_PHYLIB=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# MII PHY device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MARVELL_PHY is not set
|
||||||
|
CONFIG_DAVICOM_PHY=y
|
||||||
|
# CONFIG_QSEMI_PHY is not set
|
||||||
|
# CONFIG_LXT_PHY is not set
|
||||||
|
# CONFIG_CICADA_PHY is not set
|
||||||
|
# CONFIG_VITESSE_PHY is not set
|
||||||
|
# CONFIG_SMSC_PHY is not set
|
||||||
|
# CONFIG_BROADCOM_PHY is not set
|
||||||
|
# CONFIG_ICPLUS_PHY is not set
|
||||||
|
# CONFIG_FIXED_PHY is not set
|
||||||
|
# CONFIG_MDIO_BITBANG is not set
|
||||||
|
CONFIG_NET_ETHERNET=y
|
||||||
|
CONFIG_MII=y
|
||||||
|
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
||||||
|
# CONFIG_B44 is not set
|
||||||
|
CONFIG_FS_ENET=y
|
||||||
|
# CONFIG_FS_ENET_HAS_SCC is not set
|
||||||
|
CONFIG_FS_ENET_HAS_FEC=y
|
||||||
|
CONFIG_FS_ENET_MDIO_FEC=y
|
||||||
|
# CONFIG_NETDEV_1000 is not set
|
||||||
|
# CONFIG_NETDEV_10000 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Wireless LAN
|
||||||
|
#
|
||||||
|
# CONFIG_WLAN_PRE80211 is not set
|
||||||
|
# CONFIG_WLAN_80211 is not set
|
||||||
|
# CONFIG_WAN is not set
|
||||||
|
# CONFIG_PPP is not set
|
||||||
|
# CONFIG_SLIP is not set
|
||||||
|
# CONFIG_SHAPER is not set
|
||||||
|
# CONFIG_NETCONSOLE is not set
|
||||||
|
# CONFIG_NETPOLL is not set
|
||||||
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||||
|
# CONFIG_ISDN is not set
|
||||||
|
# CONFIG_PHONE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Input device support
|
||||||
|
#
|
||||||
|
CONFIG_INPUT=y
|
||||||
|
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||||
|
# CONFIG_INPUT_POLLDEV is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Userland interfaces
|
||||||
|
#
|
||||||
|
CONFIG_INPUT_MOUSEDEV=y
|
||||||
|
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||||
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||||
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||||
|
# CONFIG_INPUT_JOYDEV is not set
|
||||||
|
# CONFIG_INPUT_EVDEV is not set
|
||||||
|
# CONFIG_INPUT_EVBUG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Input Device Drivers
|
||||||
|
#
|
||||||
|
CONFIG_INPUT_KEYBOARD=y
|
||||||
|
CONFIG_KEYBOARD_ATKBD=y
|
||||||
|
# CONFIG_KEYBOARD_SUNKBD is not set
|
||||||
|
# CONFIG_KEYBOARD_LKKBD is not set
|
||||||
|
# CONFIG_KEYBOARD_XTKBD is not set
|
||||||
|
# CONFIG_KEYBOARD_NEWTON is not set
|
||||||
|
# CONFIG_KEYBOARD_STOWAWAY is not set
|
||||||
|
CONFIG_INPUT_MOUSE=y
|
||||||
|
CONFIG_MOUSE_PS2=y
|
||||||
|
CONFIG_MOUSE_PS2_ALPS=y
|
||||||
|
CONFIG_MOUSE_PS2_LOGIPS2PP=y
|
||||||
|
CONFIG_MOUSE_PS2_SYNAPTICS=y
|
||||||
|
CONFIG_MOUSE_PS2_LIFEBOOK=y
|
||||||
|
CONFIG_MOUSE_PS2_TRACKPOINT=y
|
||||||
|
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
|
||||||
|
# CONFIG_MOUSE_SERIAL is not set
|
||||||
|
# CONFIG_MOUSE_VSXXXAA is not set
|
||||||
|
# CONFIG_INPUT_JOYSTICK is not set
|
||||||
|
# CONFIG_INPUT_TABLET is not set
|
||||||
|
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||||
|
# CONFIG_INPUT_MISC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Hardware I/O ports
|
||||||
|
#
|
||||||
|
CONFIG_SERIO=y
|
||||||
|
CONFIG_SERIO_I8042=y
|
||||||
|
CONFIG_SERIO_SERPORT=y
|
||||||
|
CONFIG_SERIO_LIBPS2=y
|
||||||
|
# CONFIG_SERIO_RAW is not set
|
||||||
|
# CONFIG_GAMEPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Character devices
|
||||||
|
#
|
||||||
|
# CONFIG_VT is not set
|
||||||
|
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Serial drivers
|
||||||
|
#
|
||||||
|
# CONFIG_SERIAL_8250 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Non-8250 serial port support
|
||||||
|
#
|
||||||
|
# CONFIG_SERIAL_UARTLITE is not set
|
||||||
|
CONFIG_SERIAL_CORE=y
|
||||||
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||||
|
CONFIG_SERIAL_CPM=y
|
||||||
|
CONFIG_SERIAL_CPM_CONSOLE=y
|
||||||
|
# CONFIG_SERIAL_CPM_SCC1 is not set
|
||||||
|
# CONFIG_SERIAL_CPM_SCC2 is not set
|
||||||
|
# CONFIG_SERIAL_CPM_SCC3 is not set
|
||||||
|
# CONFIG_SERIAL_CPM_SCC4 is not set
|
||||||
|
CONFIG_SERIAL_CPM_SMC1=y
|
||||||
|
CONFIG_SERIAL_CPM_SMC2=y
|
||||||
|
CONFIG_UNIX98_PTYS=y
|
||||||
|
# CONFIG_LEGACY_PTYS is not set
|
||||||
|
# CONFIG_IPMI_HANDLER is not set
|
||||||
|
CONFIG_HW_RANDOM=y
|
||||||
|
# CONFIG_NVRAM is not set
|
||||||
|
CONFIG_GEN_RTC=y
|
||||||
|
# CONFIG_GEN_RTC_X is not set
|
||||||
|
# CONFIG_R3964 is not set
|
||||||
|
# CONFIG_RAW_DRIVER is not set
|
||||||
|
# CONFIG_TCG_TPM is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI support
|
||||||
|
#
|
||||||
|
# CONFIG_SPI is not set
|
||||||
|
# CONFIG_SPI_MASTER is not set
|
||||||
|
# CONFIG_W1 is not set
|
||||||
|
# CONFIG_POWER_SUPPLY is not set
|
||||||
|
# CONFIG_HWMON is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sonics Silicon Backplane
|
||||||
|
#
|
||||||
|
CONFIG_SSB_POSSIBLE=y
|
||||||
|
# CONFIG_SSB is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Multifunction device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MFD_SM501 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Multimedia devices
|
||||||
|
#
|
||||||
|
# CONFIG_VIDEO_DEV is not set
|
||||||
|
# CONFIG_DVB_CORE is not set
|
||||||
|
CONFIG_DAB=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics support
|
||||||
|
#
|
||||||
|
# CONFIG_VGASTATE is not set
|
||||||
|
CONFIG_VIDEO_OUTPUT_CONTROL=y
|
||||||
|
# CONFIG_FB is not set
|
||||||
|
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Display device support
|
||||||
|
#
|
||||||
|
# CONFIG_DISPLAY_SUPPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sound
|
||||||
|
#
|
||||||
|
# CONFIG_SOUND is not set
|
||||||
|
# CONFIG_HID_SUPPORT is not set
|
||||||
|
# CONFIG_USB_SUPPORT is not set
|
||||||
|
# CONFIG_MMC is not set
|
||||||
|
# CONFIG_NEW_LEDS is not set
|
||||||
|
# CONFIG_EDAC is not set
|
||||||
|
# CONFIG_RTC_CLASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Userspace I/O
|
||||||
|
#
|
||||||
|
# CONFIG_UIO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File systems
|
||||||
|
#
|
||||||
|
# CONFIG_EXT2_FS is not set
|
||||||
|
# CONFIG_EXT3_FS is not set
|
||||||
|
# CONFIG_EXT4DEV_FS is not set
|
||||||
|
# CONFIG_REISERFS_FS is not set
|
||||||
|
# CONFIG_JFS_FS is not set
|
||||||
|
# CONFIG_FS_POSIX_ACL is not set
|
||||||
|
# CONFIG_XFS_FS is not set
|
||||||
|
# CONFIG_GFS2_FS is not set
|
||||||
|
# CONFIG_OCFS2_FS is not set
|
||||||
|
# CONFIG_MINIX_FS is not set
|
||||||
|
# CONFIG_ROMFS_FS is not set
|
||||||
|
# CONFIG_INOTIFY is not set
|
||||||
|
# CONFIG_QUOTA is not set
|
||||||
|
# CONFIG_DNOTIFY is not set
|
||||||
|
# CONFIG_AUTOFS_FS is not set
|
||||||
|
# CONFIG_AUTOFS4_FS is not set
|
||||||
|
# CONFIG_FUSE_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# CD-ROM/DVD Filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_ISO9660_FS is not set
|
||||||
|
# CONFIG_UDF_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# DOS/FAT/NT Filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_MSDOS_FS is not set
|
||||||
|
# CONFIG_VFAT_FS is not set
|
||||||
|
# CONFIG_NTFS_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Pseudo filesystems
|
||||||
|
#
|
||||||
|
CONFIG_PROC_FS=y
|
||||||
|
# CONFIG_PROC_KCORE is not set
|
||||||
|
CONFIG_PROC_SYSCTL=y
|
||||||
|
CONFIG_SYSFS=y
|
||||||
|
CONFIG_TMPFS=y
|
||||||
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
||||||
|
# CONFIG_HUGETLB_PAGE is not set
|
||||||
|
# CONFIG_CONFIGFS_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Miscellaneous filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_ADFS_FS is not set
|
||||||
|
# CONFIG_AFFS_FS is not set
|
||||||
|
# CONFIG_HFS_FS is not set
|
||||||
|
# CONFIG_HFSPLUS_FS is not set
|
||||||
|
# CONFIG_BEFS_FS is not set
|
||||||
|
# CONFIG_BFS_FS is not set
|
||||||
|
# CONFIG_EFS_FS is not set
|
||||||
|
# CONFIG_JFFS2_FS is not set
|
||||||
|
CONFIG_CRAMFS=y
|
||||||
|
# CONFIG_VXFS_FS is not set
|
||||||
|
# CONFIG_HPFS_FS is not set
|
||||||
|
# CONFIG_QNX4FS_FS is not set
|
||||||
|
# CONFIG_SYSV_FS is not set
|
||||||
|
# CONFIG_UFS_FS is not set
|
||||||
|
CONFIG_NETWORK_FILESYSTEMS=y
|
||||||
|
CONFIG_NFS_FS=y
|
||||||
|
CONFIG_NFS_V3=y
|
||||||
|
# CONFIG_NFS_V3_ACL is not set
|
||||||
|
# CONFIG_NFS_V4 is not set
|
||||||
|
# CONFIG_NFS_DIRECTIO is not set
|
||||||
|
# CONFIG_NFSD is not set
|
||||||
|
CONFIG_ROOT_NFS=y
|
||||||
|
CONFIG_LOCKD=y
|
||||||
|
CONFIG_LOCKD_V4=y
|
||||||
|
CONFIG_NFS_COMMON=y
|
||||||
|
CONFIG_SUNRPC=y
|
||||||
|
# CONFIG_SUNRPC_BIND34 is not set
|
||||||
|
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||||
|
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||||
|
# CONFIG_SMB_FS is not set
|
||||||
|
# CONFIG_CIFS is not set
|
||||||
|
# CONFIG_NCP_FS is not set
|
||||||
|
# CONFIG_CODA_FS is not set
|
||||||
|
# CONFIG_AFS_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Partition Types
|
||||||
|
#
|
||||||
|
CONFIG_PARTITION_ADVANCED=y
|
||||||
|
# CONFIG_ACORN_PARTITION is not set
|
||||||
|
# CONFIG_OSF_PARTITION is not set
|
||||||
|
# CONFIG_AMIGA_PARTITION is not set
|
||||||
|
# CONFIG_ATARI_PARTITION is not set
|
||||||
|
# CONFIG_MAC_PARTITION is not set
|
||||||
|
CONFIG_MSDOS_PARTITION=y
|
||||||
|
# CONFIG_BSD_DISKLABEL is not set
|
||||||
|
# CONFIG_MINIX_SUBPARTITION is not set
|
||||||
|
# CONFIG_SOLARIS_X86_PARTITION is not set
|
||||||
|
# CONFIG_UNIXWARE_DISKLABEL is not set
|
||||||
|
# CONFIG_LDM_PARTITION is not set
|
||||||
|
# CONFIG_SGI_PARTITION is not set
|
||||||
|
# CONFIG_ULTRIX_PARTITION is not set
|
||||||
|
# CONFIG_SUN_PARTITION is not set
|
||||||
|
# CONFIG_KARMA_PARTITION is not set
|
||||||
|
# CONFIG_EFI_PARTITION is not set
|
||||||
|
# CONFIG_SYSV68_PARTITION is not set
|
||||||
|
# CONFIG_NLS is not set
|
||||||
|
# CONFIG_DLM is not set
|
||||||
|
# CONFIG_UCC_SLOW is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library routines
|
||||||
|
#
|
||||||
|
# CONFIG_CRC_CCITT is not set
|
||||||
|
# CONFIG_CRC16 is not set
|
||||||
|
# CONFIG_CRC_ITU_T is not set
|
||||||
|
# CONFIG_CRC32 is not set
|
||||||
|
# CONFIG_CRC7 is not set
|
||||||
|
# CONFIG_LIBCRC32C is not set
|
||||||
|
CONFIG_ZLIB_INFLATE=y
|
||||||
|
CONFIG_HAS_IOMEM=y
|
||||||
|
CONFIG_HAS_IOPORT=y
|
||||||
|
CONFIG_HAS_DMA=y
|
||||||
|
CONFIG_INSTRUMENTATION=y
|
||||||
|
# CONFIG_PROFILING is not set
|
||||||
|
# CONFIG_MARKERS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Kernel hacking
|
||||||
|
#
|
||||||
|
# CONFIG_PRINTK_TIME is not set
|
||||||
|
CONFIG_ENABLE_WARN_DEPRECATED=y
|
||||||
|
CONFIG_ENABLE_MUST_CHECK=y
|
||||||
|
CONFIG_MAGIC_SYSRQ=y
|
||||||
|
# CONFIG_UNUSED_SYMBOLS is not set
|
||||||
|
# CONFIG_DEBUG_FS is not set
|
||||||
|
# CONFIG_HEADERS_CHECK is not set
|
||||||
|
CONFIG_DEBUG_KERNEL=y
|
||||||
|
# CONFIG_DEBUG_SHIRQ is not set
|
||||||
|
CONFIG_DETECT_SOFTLOCKUP=y
|
||||||
|
CONFIG_SCHED_DEBUG=y
|
||||||
|
# CONFIG_SCHEDSTATS is not set
|
||||||
|
# CONFIG_TIMER_STATS is not set
|
||||||
|
# CONFIG_SLUB_DEBUG_ON is not set
|
||||||
|
# CONFIG_DEBUG_SPINLOCK is not set
|
||||||
|
# CONFIG_DEBUG_MUTEXES is not set
|
||||||
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||||
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||||
|
# CONFIG_DEBUG_KOBJECT is not set
|
||||||
|
CONFIG_DEBUG_BUGVERBOSE=y
|
||||||
|
CONFIG_DEBUG_INFO=y
|
||||||
|
# CONFIG_DEBUG_VM is not set
|
||||||
|
# CONFIG_DEBUG_LIST is not set
|
||||||
|
# CONFIG_DEBUG_SG is not set
|
||||||
|
CONFIG_FORCED_INLINING=y
|
||||||
|
# CONFIG_BOOT_PRINTK_DELAY is not set
|
||||||
|
# CONFIG_FAULT_INJECTION is not set
|
||||||
|
# CONFIG_SAMPLES is not set
|
||||||
|
# CONFIG_DEBUG_STACKOVERFLOW is not set
|
||||||
|
# CONFIG_DEBUG_STACK_USAGE is not set
|
||||||
|
# CONFIG_DEBUG_PAGEALLOC is not set
|
||||||
|
# CONFIG_DEBUGGER is not set
|
||||||
|
# CONFIG_BDI_SWITCH is not set
|
||||||
|
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Security options
|
||||||
|
#
|
||||||
|
# CONFIG_KEYS is not set
|
||||||
|
# CONFIG_SECURITY is not set
|
||||||
|
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
||||||
|
# CONFIG_CRYPTO is not set
|
||||||
|
# CONFIG_PPC_CLOCK is not set
|
||||||
|
CONFIG_PPC_LIB_RHEAP=y
|
||||||
|
|
@ -0,0 +1,821 @@
|
||||||
|
#
|
||||||
|
# Automatically generated make config: don't edit
|
||||||
|
# Linux kernel version: 2.6.24-rc6
|
||||||
|
# Fri Jan 11 14:02:06 2008
|
||||||
|
#
|
||||||
|
# CONFIG_PPC64 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Processor support
|
||||||
|
#
|
||||||
|
CONFIG_6xx=y
|
||||||
|
# CONFIG_PPC_85xx is not set
|
||||||
|
# CONFIG_PPC_8xx is not set
|
||||||
|
# CONFIG_40x is not set
|
||||||
|
# CONFIG_44x is not set
|
||||||
|
# CONFIG_E200 is not set
|
||||||
|
CONFIG_PPC_FPU=y
|
||||||
|
CONFIG_PPC_STD_MMU=y
|
||||||
|
CONFIG_PPC_STD_MMU_32=y
|
||||||
|
# CONFIG_PPC_MM_SLICES is not set
|
||||||
|
# CONFIG_SMP is not set
|
||||||
|
CONFIG_PPC32=y
|
||||||
|
CONFIG_WORD_SIZE=32
|
||||||
|
CONFIG_PPC_MERGE=y
|
||||||
|
CONFIG_MMU=y
|
||||||
|
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||||
|
CONFIG_GENERIC_TIME=y
|
||||||
|
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||||
|
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||||
|
CONFIG_GENERIC_HARDIRQS=y
|
||||||
|
CONFIG_IRQ_PER_CPU=y
|
||||||
|
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||||
|
CONFIG_ARCH_HAS_ILOG2_U32=y
|
||||||
|
CONFIG_GENERIC_HWEIGHT=y
|
||||||
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||||
|
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||||
|
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
|
||||||
|
CONFIG_PPC=y
|
||||||
|
CONFIG_EARLY_PRINTK=y
|
||||||
|
CONFIG_GENERIC_NVRAM=y
|
||||||
|
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||||
|
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
||||||
|
CONFIG_PPC_OF=y
|
||||||
|
CONFIG_OF=y
|
||||||
|
# CONFIG_PPC_UDBG_16550 is not set
|
||||||
|
# CONFIG_GENERIC_TBSYNC is not set
|
||||||
|
CONFIG_AUDIT_ARCH=y
|
||||||
|
CONFIG_GENERIC_BUG=y
|
||||||
|
# CONFIG_DEFAULT_UIMAGE is not set
|
||||||
|
# CONFIG_PPC_DCR_NATIVE is not set
|
||||||
|
# CONFIG_PPC_DCR_MMIO is not set
|
||||||
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||||
|
|
||||||
|
#
|
||||||
|
# General setup
|
||||||
|
#
|
||||||
|
# CONFIG_EXPERIMENTAL is not set
|
||||||
|
CONFIG_BROKEN_ON_SMP=y
|
||||||
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||||
|
CONFIG_LOCALVERSION=""
|
||||||
|
CONFIG_LOCALVERSION_AUTO=y
|
||||||
|
CONFIG_SWAP=y
|
||||||
|
CONFIG_SYSVIPC=y
|
||||||
|
CONFIG_SYSVIPC_SYSCTL=y
|
||||||
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||||
|
# CONFIG_TASKSTATS is not set
|
||||||
|
# CONFIG_AUDIT is not set
|
||||||
|
CONFIG_IKCONFIG=y
|
||||||
|
CONFIG_IKCONFIG_PROC=y
|
||||||
|
CONFIG_LOG_BUF_SHIFT=14
|
||||||
|
# CONFIG_CGROUPS is not set
|
||||||
|
CONFIG_FAIR_GROUP_SCHED=y
|
||||||
|
CONFIG_FAIR_USER_SCHED=y
|
||||||
|
# CONFIG_FAIR_CGROUP_SCHED is not set
|
||||||
|
CONFIG_SYSFS_DEPRECATED=y
|
||||||
|
# CONFIG_RELAY is not set
|
||||||
|
# CONFIG_BLK_DEV_INITRD is not set
|
||||||
|
CONFIG_SYSCTL=y
|
||||||
|
CONFIG_EMBEDDED=y
|
||||||
|
CONFIG_SYSCTL_SYSCALL=y
|
||||||
|
CONFIG_KALLSYMS=y
|
||||||
|
CONFIG_KALLSYMS_ALL=y
|
||||||
|
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||||
|
CONFIG_HOTPLUG=y
|
||||||
|
CONFIG_PRINTK=y
|
||||||
|
CONFIG_BUG=y
|
||||||
|
CONFIG_ELF_CORE=y
|
||||||
|
CONFIG_BASE_FULL=y
|
||||||
|
CONFIG_FUTEX=y
|
||||||
|
CONFIG_ANON_INODES=y
|
||||||
|
CONFIG_EPOLL=y
|
||||||
|
CONFIG_SIGNALFD=y
|
||||||
|
CONFIG_EVENTFD=y
|
||||||
|
CONFIG_SHMEM=y
|
||||||
|
CONFIG_VM_EVENT_COUNTERS=y
|
||||||
|
CONFIG_SLAB=y
|
||||||
|
# CONFIG_SLUB is not set
|
||||||
|
# CONFIG_SLOB is not set
|
||||||
|
CONFIG_RT_MUTEXES=y
|
||||||
|
# CONFIG_TINY_SHMEM is not set
|
||||||
|
CONFIG_BASE_SMALL=0
|
||||||
|
# CONFIG_MODULES is not set
|
||||||
|
CONFIG_BLOCK=y
|
||||||
|
# CONFIG_LBD is not set
|
||||||
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||||
|
# CONFIG_LSF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# IO Schedulers
|
||||||
|
#
|
||||||
|
CONFIG_IOSCHED_NOOP=y
|
||||||
|
# CONFIG_IOSCHED_AS is not set
|
||||||
|
CONFIG_IOSCHED_DEADLINE=y
|
||||||
|
# CONFIG_IOSCHED_CFQ is not set
|
||||||
|
# CONFIG_DEFAULT_AS is not set
|
||||||
|
CONFIG_DEFAULT_DEADLINE=y
|
||||||
|
# CONFIG_DEFAULT_CFQ is not set
|
||||||
|
# CONFIG_DEFAULT_NOOP is not set
|
||||||
|
CONFIG_DEFAULT_IOSCHED="deadline"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Platform support
|
||||||
|
#
|
||||||
|
# CONFIG_PPC_MULTIPLATFORM is not set
|
||||||
|
CONFIG_PPC_82xx=y
|
||||||
|
# CONFIG_PPC_83xx is not set
|
||||||
|
# CONFIG_PPC_86xx is not set
|
||||||
|
# CONFIG_PPC_MPC52xx is not set
|
||||||
|
# CONFIG_PPC_MPC5200 is not set
|
||||||
|
# CONFIG_PPC_CELL is not set
|
||||||
|
# CONFIG_PPC_CELL_NATIVE is not set
|
||||||
|
# CONFIG_MPC8272_ADS is not set
|
||||||
|
# CONFIG_PQ2FADS is not set
|
||||||
|
CONFIG_EP8248E=y
|
||||||
|
# CONFIG_PQ2ADS is not set
|
||||||
|
CONFIG_8260=y
|
||||||
|
CONFIG_8272=y
|
||||||
|
# CONFIG_MPIC is not set
|
||||||
|
# CONFIG_MPIC_WEIRD is not set
|
||||||
|
# CONFIG_PPC_I8259 is not set
|
||||||
|
# CONFIG_PPC_RTAS is not set
|
||||||
|
# CONFIG_MMIO_NVRAM is not set
|
||||||
|
# CONFIG_PPC_MPC106 is not set
|
||||||
|
# CONFIG_PPC_970_NAP is not set
|
||||||
|
# CONFIG_PPC_INDIRECT_IO is not set
|
||||||
|
# CONFIG_GENERIC_IOMAP is not set
|
||||||
|
# CONFIG_CPU_FREQ is not set
|
||||||
|
CONFIG_CPM2=y
|
||||||
|
CONFIG_PPC_CPM_NEW_BINDING=y
|
||||||
|
# CONFIG_FSL_ULI1575 is not set
|
||||||
|
CONFIG_CPM=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Kernel options
|
||||||
|
#
|
||||||
|
# CONFIG_HIGHMEM is not set
|
||||||
|
# CONFIG_TICK_ONESHOT is not set
|
||||||
|
# CONFIG_NO_HZ is not set
|
||||||
|
# CONFIG_HIGH_RES_TIMERS is not set
|
||||||
|
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||||
|
# CONFIG_HZ_100 is not set
|
||||||
|
CONFIG_HZ_250=y
|
||||||
|
# CONFIG_HZ_300 is not set
|
||||||
|
# CONFIG_HZ_1000 is not set
|
||||||
|
CONFIG_HZ=250
|
||||||
|
CONFIG_PREEMPT_NONE=y
|
||||||
|
# CONFIG_PREEMPT_VOLUNTARY is not set
|
||||||
|
# CONFIG_PREEMPT is not set
|
||||||
|
CONFIG_BINFMT_ELF=y
|
||||||
|
CONFIG_BINFMT_MISC=y
|
||||||
|
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
||||||
|
CONFIG_ARCH_FLATMEM_ENABLE=y
|
||||||
|
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||||
|
CONFIG_FLATMEM=y
|
||||||
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||||
|
# CONFIG_SPARSEMEM_STATIC is not set
|
||||||
|
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||||
|
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||||
|
# CONFIG_RESOURCES_64BIT is not set
|
||||||
|
CONFIG_ZONE_DMA_FLAG=1
|
||||||
|
CONFIG_BOUNCE=y
|
||||||
|
CONFIG_VIRT_TO_BUS=y
|
||||||
|
CONFIG_PROC_DEVICETREE=y
|
||||||
|
# CONFIG_CMDLINE_BOOL is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
CONFIG_SUSPEND_UP_POSSIBLE=y
|
||||||
|
CONFIG_HIBERNATION_UP_POSSIBLE=y
|
||||||
|
# CONFIG_SECCOMP is not set
|
||||||
|
CONFIG_WANT_DEVICE_TREE=y
|
||||||
|
CONFIG_DEVICE_TREE="ep8248e.dts"
|
||||||
|
CONFIG_ISA_DMA_API=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Bus options
|
||||||
|
#
|
||||||
|
CONFIG_ZONE_DMA=y
|
||||||
|
CONFIG_FSL_SOC=y
|
||||||
|
# CONFIG_PCI is not set
|
||||||
|
# CONFIG_PCI_DOMAINS is not set
|
||||||
|
# CONFIG_PCI_SYSCALL is not set
|
||||||
|
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||||
|
# CONFIG_PCCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Advanced setup
|
||||||
|
#
|
||||||
|
# CONFIG_ADVANCED_OPTIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Default settings for advanced configuration options are used
|
||||||
|
#
|
||||||
|
CONFIG_HIGHMEM_START=0xfe000000
|
||||||
|
CONFIG_LOWMEM_SIZE=0x30000000
|
||||||
|
CONFIG_KERNEL_START=0xc0000000
|
||||||
|
CONFIG_TASK_SIZE=0xc0000000
|
||||||
|
CONFIG_BOOT_LOAD=0x00400000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking
|
||||||
|
#
|
||||||
|
CONFIG_NET=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking options
|
||||||
|
#
|
||||||
|
CONFIG_PACKET=y
|
||||||
|
# CONFIG_PACKET_MMAP is not set
|
||||||
|
CONFIG_UNIX=y
|
||||||
|
CONFIG_XFRM=y
|
||||||
|
# CONFIG_XFRM_USER is not set
|
||||||
|
# CONFIG_NET_KEY is not set
|
||||||
|
CONFIG_INET=y
|
||||||
|
CONFIG_IP_MULTICAST=y
|
||||||
|
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||||
|
CONFIG_IP_FIB_HASH=y
|
||||||
|
CONFIG_IP_PNP=y
|
||||||
|
CONFIG_IP_PNP_DHCP=y
|
||||||
|
CONFIG_IP_PNP_BOOTP=y
|
||||||
|
# CONFIG_IP_PNP_RARP is not set
|
||||||
|
# CONFIG_NET_IPIP is not set
|
||||||
|
# CONFIG_NET_IPGRE is not set
|
||||||
|
# CONFIG_IP_MROUTE is not set
|
||||||
|
CONFIG_SYN_COOKIES=y
|
||||||
|
# CONFIG_INET_AH is not set
|
||||||
|
# CONFIG_INET_ESP is not set
|
||||||
|
# CONFIG_INET_IPCOMP is not set
|
||||||
|
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||||
|
CONFIG_INET_TUNNEL=y
|
||||||
|
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||||
|
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||||
|
CONFIG_INET_XFRM_MODE_BEET=y
|
||||||
|
# CONFIG_INET_LRO is not set
|
||||||
|
CONFIG_INET_DIAG=y
|
||||||
|
CONFIG_INET_TCP_DIAG=y
|
||||||
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||||
|
CONFIG_TCP_CONG_CUBIC=y
|
||||||
|
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||||
|
# CONFIG_IP_VS is not set
|
||||||
|
CONFIG_IPV6=y
|
||||||
|
# CONFIG_IPV6_PRIVACY is not set
|
||||||
|
# CONFIG_IPV6_ROUTER_PREF is not set
|
||||||
|
# CONFIG_INET6_AH is not set
|
||||||
|
# CONFIG_INET6_ESP is not set
|
||||||
|
# CONFIG_INET6_IPCOMP is not set
|
||||||
|
# CONFIG_INET6_XFRM_TUNNEL is not set
|
||||||
|
# CONFIG_INET6_TUNNEL is not set
|
||||||
|
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
|
||||||
|
CONFIG_INET6_XFRM_MODE_TUNNEL=y
|
||||||
|
CONFIG_INET6_XFRM_MODE_BEET=y
|
||||||
|
CONFIG_IPV6_SIT=y
|
||||||
|
# CONFIG_IPV6_TUNNEL is not set
|
||||||
|
# CONFIG_NETWORK_SECMARK is not set
|
||||||
|
CONFIG_NETFILTER=y
|
||||||
|
# CONFIG_NETFILTER_DEBUG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Core Netfilter Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_NETFILTER_NETLINK is not set
|
||||||
|
# CONFIG_NF_CONNTRACK_ENABLED is not set
|
||||||
|
# CONFIG_NF_CONNTRACK is not set
|
||||||
|
# CONFIG_NETFILTER_XTABLES is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# IP: Netfilter Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_IP_NF_QUEUE is not set
|
||||||
|
# CONFIG_IP_NF_IPTABLES is not set
|
||||||
|
# CONFIG_IP_NF_ARPTABLES is not set
|
||||||
|
# CONFIG_BRIDGE is not set
|
||||||
|
# CONFIG_VLAN_8021Q is not set
|
||||||
|
# CONFIG_DECNET is not set
|
||||||
|
# CONFIG_LLC2 is not set
|
||||||
|
# CONFIG_IPX is not set
|
||||||
|
# CONFIG_ATALK is not set
|
||||||
|
# CONFIG_NET_SCHED is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network testing
|
||||||
|
#
|
||||||
|
# CONFIG_NET_PKTGEN is not set
|
||||||
|
# CONFIG_HAMRADIO is not set
|
||||||
|
# CONFIG_IRDA is not set
|
||||||
|
# CONFIG_BT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Wireless
|
||||||
|
#
|
||||||
|
# CONFIG_CFG80211 is not set
|
||||||
|
# CONFIG_WIRELESS_EXT is not set
|
||||||
|
# CONFIG_IEEE80211 is not set
|
||||||
|
# CONFIG_RFKILL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Generic Driver Options
|
||||||
|
#
|
||||||
|
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||||
|
CONFIG_STANDALONE=y
|
||||||
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||||
|
# CONFIG_FW_LOADER is not set
|
||||||
|
# CONFIG_DEBUG_DRIVER is not set
|
||||||
|
# CONFIG_DEBUG_DEVRES is not set
|
||||||
|
# CONFIG_SYS_HYPERVISOR is not set
|
||||||
|
# CONFIG_CONNECTOR is not set
|
||||||
|
CONFIG_MTD=y
|
||||||
|
# CONFIG_MTD_DEBUG is not set
|
||||||
|
# CONFIG_MTD_CONCAT is not set
|
||||||
|
# CONFIG_MTD_PARTITIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# User Modules And Translation Layers
|
||||||
|
#
|
||||||
|
CONFIG_MTD_CHAR=y
|
||||||
|
CONFIG_MTD_BLKDEVS=y
|
||||||
|
CONFIG_MTD_BLOCK=y
|
||||||
|
# CONFIG_FTL is not set
|
||||||
|
# CONFIG_NFTL is not set
|
||||||
|
# CONFIG_INFTL is not set
|
||||||
|
# CONFIG_RFD_FTL is not set
|
||||||
|
# CONFIG_SSFDC is not set
|
||||||
|
# CONFIG_MTD_OOPS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAM/ROM/Flash chip drivers
|
||||||
|
#
|
||||||
|
CONFIG_MTD_CFI=y
|
||||||
|
# CONFIG_MTD_JEDECPROBE is not set
|
||||||
|
CONFIG_MTD_GEN_PROBE=y
|
||||||
|
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||||
|
CONFIG_MTD_CFI_NOSWAP=y
|
||||||
|
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
|
||||||
|
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
|
||||||
|
CONFIG_MTD_CFI_GEOMETRY=y
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
|
||||||
|
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||||
|
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||||
|
# CONFIG_MTD_CFI_I1 is not set
|
||||||
|
CONFIG_MTD_CFI_I2=y
|
||||||
|
# CONFIG_MTD_CFI_I4 is not set
|
||||||
|
# CONFIG_MTD_CFI_I8 is not set
|
||||||
|
# CONFIG_MTD_OTP is not set
|
||||||
|
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||||
|
CONFIG_MTD_CFI_AMDSTD=y
|
||||||
|
# CONFIG_MTD_CFI_STAA is not set
|
||||||
|
CONFIG_MTD_CFI_UTIL=y
|
||||||
|
# CONFIG_MTD_RAM is not set
|
||||||
|
# CONFIG_MTD_ROM is not set
|
||||||
|
# CONFIG_MTD_ABSENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Mapping drivers for chip access
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||||
|
# CONFIG_MTD_PHYSMAP is not set
|
||||||
|
CONFIG_MTD_PHYSMAP_OF=y
|
||||||
|
# CONFIG_MTD_PLATRAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Self-contained MTD device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_SLRAM is not set
|
||||||
|
# CONFIG_MTD_PHRAM is not set
|
||||||
|
# CONFIG_MTD_MTDRAM is not set
|
||||||
|
# CONFIG_MTD_BLOCK2MTD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Disk-On-Chip Device Drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_DOC2000 is not set
|
||||||
|
# CONFIG_MTD_DOC2001 is not set
|
||||||
|
# CONFIG_MTD_DOC2001PLUS is not set
|
||||||
|
# CONFIG_MTD_NAND is not set
|
||||||
|
# CONFIG_MTD_ONENAND is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# UBI - Unsorted block images
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_UBI is not set
|
||||||
|
CONFIG_OF_DEVICE=y
|
||||||
|
# CONFIG_PARPORT is not set
|
||||||
|
CONFIG_BLK_DEV=y
|
||||||
|
# CONFIG_BLK_DEV_FD is not set
|
||||||
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||||
|
CONFIG_BLK_DEV_LOOP=y
|
||||||
|
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||||
|
# CONFIG_BLK_DEV_NBD is not set
|
||||||
|
# CONFIG_BLK_DEV_RAM is not set
|
||||||
|
# CONFIG_CDROM_PKTCDVD is not set
|
||||||
|
# CONFIG_ATA_OVER_ETH is not set
|
||||||
|
# CONFIG_MISC_DEVICES is not set
|
||||||
|
# CONFIG_IDE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SCSI device support
|
||||||
|
#
|
||||||
|
# CONFIG_RAID_ATTRS is not set
|
||||||
|
# CONFIG_SCSI is not set
|
||||||
|
# CONFIG_SCSI_DMA is not set
|
||||||
|
# CONFIG_SCSI_NETLINK is not set
|
||||||
|
# CONFIG_ATA is not set
|
||||||
|
# CONFIG_MD is not set
|
||||||
|
# CONFIG_MACINTOSH_DRIVERS is not set
|
||||||
|
CONFIG_NETDEVICES=y
|
||||||
|
# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
||||||
|
# CONFIG_DUMMY is not set
|
||||||
|
# CONFIG_BONDING is not set
|
||||||
|
# CONFIG_EQUALIZER is not set
|
||||||
|
# CONFIG_TUN is not set
|
||||||
|
# CONFIG_VETH is not set
|
||||||
|
CONFIG_PHYLIB=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# MII PHY device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MARVELL_PHY is not set
|
||||||
|
CONFIG_DAVICOM_PHY=y
|
||||||
|
# CONFIG_QSEMI_PHY is not set
|
||||||
|
# CONFIG_LXT_PHY is not set
|
||||||
|
# CONFIG_CICADA_PHY is not set
|
||||||
|
# CONFIG_VITESSE_PHY is not set
|
||||||
|
# CONFIG_SMSC_PHY is not set
|
||||||
|
# CONFIG_BROADCOM_PHY is not set
|
||||||
|
# CONFIG_ICPLUS_PHY is not set
|
||||||
|
# CONFIG_FIXED_PHY is not set
|
||||||
|
CONFIG_MDIO_BITBANG=y
|
||||||
|
CONFIG_NET_ETHERNET=y
|
||||||
|
CONFIG_MII=y
|
||||||
|
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
||||||
|
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
||||||
|
# CONFIG_B44 is not set
|
||||||
|
CONFIG_FS_ENET=y
|
||||||
|
# CONFIG_FS_ENET_HAS_SCC is not set
|
||||||
|
CONFIG_FS_ENET_HAS_FCC=y
|
||||||
|
# CONFIG_FS_ENET_MDIO_FCC is not set
|
||||||
|
CONFIG_NETDEV_1000=y
|
||||||
|
CONFIG_NETDEV_10000=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Wireless LAN
|
||||||
|
#
|
||||||
|
# CONFIG_WLAN_PRE80211 is not set
|
||||||
|
# CONFIG_WLAN_80211 is not set
|
||||||
|
# CONFIG_WAN is not set
|
||||||
|
# CONFIG_PPP is not set
|
||||||
|
# CONFIG_SLIP is not set
|
||||||
|
# CONFIG_NETPOLL is not set
|
||||||
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||||
|
# CONFIG_ISDN is not set
|
||||||
|
# CONFIG_PHONE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Input device support
|
||||||
|
#
|
||||||
|
# CONFIG_INPUT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Hardware I/O ports
|
||||||
|
#
|
||||||
|
# CONFIG_SERIO is not set
|
||||||
|
# CONFIG_GAMEPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Character devices
|
||||||
|
#
|
||||||
|
# CONFIG_VT is not set
|
||||||
|
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Serial drivers
|
||||||
|
#
|
||||||
|
# CONFIG_SERIAL_8250 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Non-8250 serial port support
|
||||||
|
#
|
||||||
|
# CONFIG_SERIAL_UARTLITE is not set
|
||||||
|
CONFIG_SERIAL_CORE=y
|
||||||
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||||
|
CONFIG_SERIAL_CPM=y
|
||||||
|
CONFIG_SERIAL_CPM_CONSOLE=y
|
||||||
|
CONFIG_SERIAL_CPM_SCC1=y
|
||||||
|
# CONFIG_SERIAL_CPM_SCC2 is not set
|
||||||
|
# CONFIG_SERIAL_CPM_SCC3 is not set
|
||||||
|
CONFIG_SERIAL_CPM_SCC4=y
|
||||||
|
# CONFIG_SERIAL_CPM_SMC1 is not set
|
||||||
|
# CONFIG_SERIAL_CPM_SMC2 is not set
|
||||||
|
CONFIG_UNIX98_PTYS=y
|
||||||
|
CONFIG_LEGACY_PTYS=y
|
||||||
|
CONFIG_LEGACY_PTY_COUNT=256
|
||||||
|
# CONFIG_IPMI_HANDLER is not set
|
||||||
|
CONFIG_HW_RANDOM=y
|
||||||
|
# CONFIG_NVRAM is not set
|
||||||
|
# CONFIG_GEN_RTC is not set
|
||||||
|
# CONFIG_R3964 is not set
|
||||||
|
# CONFIG_RAW_DRIVER is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI support
|
||||||
|
#
|
||||||
|
# CONFIG_SPI is not set
|
||||||
|
# CONFIG_SPI_MASTER is not set
|
||||||
|
# CONFIG_W1 is not set
|
||||||
|
# CONFIG_POWER_SUPPLY is not set
|
||||||
|
# CONFIG_HWMON is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sonics Silicon Backplane
|
||||||
|
#
|
||||||
|
CONFIG_SSB_POSSIBLE=y
|
||||||
|
# CONFIG_SSB is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Multifunction device drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MFD_SM501 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Multimedia devices
|
||||||
|
#
|
||||||
|
# CONFIG_VIDEO_DEV is not set
|
||||||
|
# CONFIG_DVB_CORE is not set
|
||||||
|
CONFIG_DAB=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics support
|
||||||
|
#
|
||||||
|
# CONFIG_VGASTATE is not set
|
||||||
|
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||||
|
# CONFIG_FB is not set
|
||||||
|
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Display device support
|
||||||
|
#
|
||||||
|
# CONFIG_DISPLAY_SUPPORT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sound
|
||||||
|
#
|
||||||
|
# CONFIG_SOUND is not set
|
||||||
|
# CONFIG_USB_SUPPORT is not set
|
||||||
|
# CONFIG_MMC is not set
|
||||||
|
# CONFIG_NEW_LEDS is not set
|
||||||
|
# CONFIG_RTC_CLASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Userspace I/O
|
||||||
|
#
|
||||||
|
# CONFIG_UIO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File systems
|
||||||
|
#
|
||||||
|
CONFIG_EXT2_FS=y
|
||||||
|
# CONFIG_EXT2_FS_XATTR is not set
|
||||||
|
# CONFIG_EXT2_FS_XIP is not set
|
||||||
|
CONFIG_EXT3_FS=y
|
||||||
|
# CONFIG_EXT3_FS_XATTR is not set
|
||||||
|
CONFIG_JBD=y
|
||||||
|
# CONFIG_REISERFS_FS is not set
|
||||||
|
# CONFIG_JFS_FS is not set
|
||||||
|
# CONFIG_FS_POSIX_ACL is not set
|
||||||
|
# CONFIG_XFS_FS is not set
|
||||||
|
# CONFIG_OCFS2_FS is not set
|
||||||
|
# CONFIG_MINIX_FS is not set
|
||||||
|
# CONFIG_ROMFS_FS is not set
|
||||||
|
CONFIG_INOTIFY=y
|
||||||
|
CONFIG_INOTIFY_USER=y
|
||||||
|
# CONFIG_QUOTA is not set
|
||||||
|
CONFIG_DNOTIFY=y
|
||||||
|
# CONFIG_AUTOFS_FS is not set
|
||||||
|
CONFIG_AUTOFS4_FS=y
|
||||||
|
# CONFIG_FUSE_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# CD-ROM/DVD Filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_ISO9660_FS is not set
|
||||||
|
# CONFIG_UDF_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# DOS/FAT/NT Filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_MSDOS_FS is not set
|
||||||
|
# CONFIG_VFAT_FS is not set
|
||||||
|
# CONFIG_NTFS_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Pseudo filesystems
|
||||||
|
#
|
||||||
|
CONFIG_PROC_FS=y
|
||||||
|
CONFIG_PROC_KCORE=y
|
||||||
|
CONFIG_PROC_SYSCTL=y
|
||||||
|
CONFIG_SYSFS=y
|
||||||
|
CONFIG_TMPFS=y
|
||||||
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
||||||
|
# CONFIG_HUGETLB_PAGE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Miscellaneous filesystems
|
||||||
|
#
|
||||||
|
# CONFIG_HFSPLUS_FS is not set
|
||||||
|
# CONFIG_JFFS2_FS is not set
|
||||||
|
CONFIG_CRAMFS=y
|
||||||
|
# CONFIG_VXFS_FS is not set
|
||||||
|
# CONFIG_HPFS_FS is not set
|
||||||
|
# CONFIG_QNX4FS_FS is not set
|
||||||
|
# CONFIG_SYSV_FS is not set
|
||||||
|
# CONFIG_UFS_FS is not set
|
||||||
|
CONFIG_NETWORK_FILESYSTEMS=y
|
||||||
|
CONFIG_NFS_FS=y
|
||||||
|
CONFIG_NFS_V3=y
|
||||||
|
# CONFIG_NFS_V3_ACL is not set
|
||||||
|
# CONFIG_NFS_DIRECTIO is not set
|
||||||
|
# CONFIG_NFSD is not set
|
||||||
|
CONFIG_ROOT_NFS=y
|
||||||
|
CONFIG_LOCKD=y
|
||||||
|
CONFIG_LOCKD_V4=y
|
||||||
|
CONFIG_NFS_COMMON=y
|
||||||
|
CONFIG_SUNRPC=y
|
||||||
|
# CONFIG_SMB_FS is not set
|
||||||
|
# CONFIG_CIFS is not set
|
||||||
|
# CONFIG_NCP_FS is not set
|
||||||
|
# CONFIG_CODA_FS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Partition Types
|
||||||
|
#
|
||||||
|
CONFIG_PARTITION_ADVANCED=y
|
||||||
|
# CONFIG_ACORN_PARTITION is not set
|
||||||
|
# CONFIG_OSF_PARTITION is not set
|
||||||
|
# CONFIG_AMIGA_PARTITION is not set
|
||||||
|
# CONFIG_ATARI_PARTITION is not set
|
||||||
|
# CONFIG_MAC_PARTITION is not set
|
||||||
|
CONFIG_MSDOS_PARTITION=y
|
||||||
|
# CONFIG_BSD_DISKLABEL is not set
|
||||||
|
# CONFIG_MINIX_SUBPARTITION is not set
|
||||||
|
# CONFIG_SOLARIS_X86_PARTITION is not set
|
||||||
|
# CONFIG_UNIXWARE_DISKLABEL is not set
|
||||||
|
# CONFIG_LDM_PARTITION is not set
|
||||||
|
# CONFIG_SGI_PARTITION is not set
|
||||||
|
# CONFIG_ULTRIX_PARTITION is not set
|
||||||
|
# CONFIG_SUN_PARTITION is not set
|
||||||
|
# CONFIG_KARMA_PARTITION is not set
|
||||||
|
# CONFIG_EFI_PARTITION is not set
|
||||||
|
# CONFIG_SYSV68_PARTITION is not set
|
||||||
|
CONFIG_NLS=y
|
||||||
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||||
|
CONFIG_NLS_CODEPAGE_437=y
|
||||||
|
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_850 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_8 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||||
|
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||||
|
CONFIG_NLS_ASCII=y
|
||||||
|
CONFIG_NLS_ISO8859_1=y
|
||||||
|
# CONFIG_NLS_ISO8859_2 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_3 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_4 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_5 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_6 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_7 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_9 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_13 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_14 is not set
|
||||||
|
# CONFIG_NLS_ISO8859_15 is not set
|
||||||
|
# CONFIG_NLS_KOI8_R is not set
|
||||||
|
# CONFIG_NLS_KOI8_U is not set
|
||||||
|
CONFIG_NLS_UTF8=y
|
||||||
|
# CONFIG_UCC_SLOW is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library routines
|
||||||
|
#
|
||||||
|
# CONFIG_CRC_CCITT is not set
|
||||||
|
# CONFIG_CRC16 is not set
|
||||||
|
# CONFIG_CRC_ITU_T is not set
|
||||||
|
# CONFIG_CRC32 is not set
|
||||||
|
# CONFIG_CRC7 is not set
|
||||||
|
# CONFIG_LIBCRC32C is not set
|
||||||
|
CONFIG_ZLIB_INFLATE=y
|
||||||
|
CONFIG_PLIST=y
|
||||||
|
CONFIG_HAS_IOMEM=y
|
||||||
|
CONFIG_HAS_IOPORT=y
|
||||||
|
CONFIG_HAS_DMA=y
|
||||||
|
CONFIG_INSTRUMENTATION=y
|
||||||
|
# CONFIG_PROFILING is not set
|
||||||
|
# CONFIG_MARKERS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Kernel hacking
|
||||||
|
#
|
||||||
|
# CONFIG_PRINTK_TIME is not set
|
||||||
|
CONFIG_ENABLE_WARN_DEPRECATED=y
|
||||||
|
CONFIG_ENABLE_MUST_CHECK=y
|
||||||
|
CONFIG_MAGIC_SYSRQ=y
|
||||||
|
# CONFIG_UNUSED_SYMBOLS is not set
|
||||||
|
# CONFIG_DEBUG_FS is not set
|
||||||
|
# CONFIG_HEADERS_CHECK is not set
|
||||||
|
CONFIG_DEBUG_KERNEL=y
|
||||||
|
# CONFIG_DEBUG_SHIRQ is not set
|
||||||
|
# CONFIG_DETECT_SOFTLOCKUP is not set
|
||||||
|
# CONFIG_SCHED_DEBUG is not set
|
||||||
|
# CONFIG_SCHEDSTATS is not set
|
||||||
|
# CONFIG_TIMER_STATS is not set
|
||||||
|
# CONFIG_DEBUG_SLAB is not set
|
||||||
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
||||||
|
# CONFIG_RT_MUTEX_TESTER is not set
|
||||||
|
# CONFIG_DEBUG_SPINLOCK is not set
|
||||||
|
# CONFIG_DEBUG_MUTEXES is not set
|
||||||
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||||
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||||
|
# CONFIG_DEBUG_KOBJECT is not set
|
||||||
|
CONFIG_DEBUG_BUGVERBOSE=y
|
||||||
|
CONFIG_DEBUG_INFO=y
|
||||||
|
# CONFIG_DEBUG_VM is not set
|
||||||
|
# CONFIG_DEBUG_LIST is not set
|
||||||
|
# CONFIG_DEBUG_SG is not set
|
||||||
|
CONFIG_FORCED_INLINING=y
|
||||||
|
# CONFIG_BOOT_PRINTK_DELAY is not set
|
||||||
|
# CONFIG_FAULT_INJECTION is not set
|
||||||
|
# CONFIG_SAMPLES is not set
|
||||||
|
# CONFIG_DEBUG_STACKOVERFLOW is not set
|
||||||
|
# CONFIG_DEBUG_STACK_USAGE is not set
|
||||||
|
# CONFIG_DEBUG_PAGEALLOC is not set
|
||||||
|
# CONFIG_DEBUGGER is not set
|
||||||
|
# CONFIG_KGDB_CONSOLE is not set
|
||||||
|
CONFIG_BDI_SWITCH=y
|
||||||
|
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Security options
|
||||||
|
#
|
||||||
|
# CONFIG_KEYS is not set
|
||||||
|
# CONFIG_SECURITY is not set
|
||||||
|
CONFIG_CRYPTO=y
|
||||||
|
CONFIG_CRYPTO_ALGAPI=y
|
||||||
|
CONFIG_CRYPTO_BLKCIPHER=y
|
||||||
|
CONFIG_CRYPTO_MANAGER=y
|
||||||
|
# CONFIG_CRYPTO_HMAC is not set
|
||||||
|
# CONFIG_CRYPTO_NULL is not set
|
||||||
|
# CONFIG_CRYPTO_MD4 is not set
|
||||||
|
CONFIG_CRYPTO_MD5=y
|
||||||
|
# CONFIG_CRYPTO_SHA1 is not set
|
||||||
|
# CONFIG_CRYPTO_SHA256 is not set
|
||||||
|
# CONFIG_CRYPTO_SHA512 is not set
|
||||||
|
# CONFIG_CRYPTO_WP512 is not set
|
||||||
|
# CONFIG_CRYPTO_TGR192 is not set
|
||||||
|
CONFIG_CRYPTO_ECB=y
|
||||||
|
CONFIG_CRYPTO_CBC=y
|
||||||
|
CONFIG_CRYPTO_PCBC=y
|
||||||
|
# CONFIG_CRYPTO_CRYPTD is not set
|
||||||
|
CONFIG_CRYPTO_DES=y
|
||||||
|
# CONFIG_CRYPTO_FCRYPT is not set
|
||||||
|
# CONFIG_CRYPTO_BLOWFISH is not set
|
||||||
|
# CONFIG_CRYPTO_TWOFISH is not set
|
||||||
|
# CONFIG_CRYPTO_SERPENT is not set
|
||||||
|
# CONFIG_CRYPTO_AES is not set
|
||||||
|
# CONFIG_CRYPTO_CAST5 is not set
|
||||||
|
# CONFIG_CRYPTO_CAST6 is not set
|
||||||
|
# CONFIG_CRYPTO_TEA is not set
|
||||||
|
# CONFIG_CRYPTO_ARC4 is not set
|
||||||
|
# CONFIG_CRYPTO_KHAZAD is not set
|
||||||
|
# CONFIG_CRYPTO_ANUBIS is not set
|
||||||
|
# CONFIG_CRYPTO_SEED is not set
|
||||||
|
# CONFIG_CRYPTO_DEFLATE is not set
|
||||||
|
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
||||||
|
# CONFIG_CRYPTO_CRC32C is not set
|
||||||
|
# CONFIG_CRYPTO_CAMELLIA is not set
|
||||||
|
# CONFIG_CRYPTO_AUTHENC is not set
|
||||||
|
# CONFIG_CRYPTO_HW is not set
|
||||||
|
# CONFIG_PPC_CLOCK is not set
|
||||||
|
CONFIG_PPC_LIB_RHEAP=y
|
||||||
|
|
@ -1,7 +1,7 @@
|
||||||
#
|
#
|
||||||
# Automatically generated make config: don't edit
|
# Automatically generated make config: don't edit
|
||||||
# Linux kernel version: 2.6.24-rc4
|
# Linux kernel version: 2.6.24-rc6
|
||||||
# Thu Dec 6 16:48:31 2007
|
# Thu Jan 17 16:35:55 2008
|
||||||
#
|
#
|
||||||
# CONFIG_PPC64 is not set
|
# CONFIG_PPC64 is not set
|
||||||
|
|
||||||
|
|
@ -144,6 +144,7 @@ CONFIG_MPC8313_RDB=y
|
||||||
# CONFIG_MPC834x_MDS is not set
|
# CONFIG_MPC834x_MDS is not set
|
||||||
# CONFIG_MPC834x_ITX is not set
|
# CONFIG_MPC834x_ITX is not set
|
||||||
# CONFIG_MPC836x_MDS is not set
|
# CONFIG_MPC836x_MDS is not set
|
||||||
|
# CONFIG_MPC837x_MDS is not set
|
||||||
CONFIG_PPC_MPC831x=y
|
CONFIG_PPC_MPC831x=y
|
||||||
# CONFIG_MPIC is not set
|
# CONFIG_MPIC is not set
|
||||||
# CONFIG_MPIC_WEIRD is not set
|
# CONFIG_MPIC_WEIRD is not set
|
||||||
|
|
@ -336,15 +337,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||||
CONFIG_MTD=y
|
CONFIG_MTD=y
|
||||||
# CONFIG_MTD_DEBUG is not set
|
# CONFIG_MTD_DEBUG is not set
|
||||||
# CONFIG_MTD_CONCAT is not set
|
# CONFIG_MTD_CONCAT is not set
|
||||||
# CONFIG_MTD_PARTITIONS is not set
|
CONFIG_MTD_PARTITIONS=y
|
||||||
|
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||||
|
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
# User Modules And Translation Layers
|
# User Modules And Translation Layers
|
||||||
#
|
#
|
||||||
CONFIG_MTD_CHAR=y
|
CONFIG_MTD_CHAR=y
|
||||||
# CONFIG_MTD_BLKDEVS is not set
|
CONFIG_MTD_BLKDEVS=y
|
||||||
# CONFIG_MTD_BLOCK is not set
|
CONFIG_MTD_BLOCK=y
|
||||||
# CONFIG_MTD_BLOCK_RO is not set
|
|
||||||
# CONFIG_FTL is not set
|
# CONFIG_FTL is not set
|
||||||
# CONFIG_NFTL is not set
|
# CONFIG_NFTL is not set
|
||||||
# CONFIG_INFTL is not set
|
# CONFIG_INFTL is not set
|
||||||
|
|
@ -381,11 +383,8 @@ CONFIG_MTD_CFI_UTIL=y
|
||||||
# Mapping drivers for chip access
|
# Mapping drivers for chip access
|
||||||
#
|
#
|
||||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||||
CONFIG_MTD_PHYSMAP=y
|
# CONFIG_MTD_PHYSMAP is not set
|
||||||
CONFIG_MTD_PHYSMAP_START=0xfe000000
|
CONFIG_MTD_PHYSMAP_OF=y
|
||||||
CONFIG_MTD_PHYSMAP_LEN=0x1000000
|
|
||||||
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
|
||||||
# CONFIG_MTD_PHYSMAP_OF is not set
|
|
||||||
# CONFIG_MTD_INTEL_VR_NOR is not set
|
# CONFIG_MTD_INTEL_VR_NOR is not set
|
||||||
# CONFIG_MTD_PLATRAM is not set
|
# CONFIG_MTD_PLATRAM is not set
|
||||||
|
|
||||||
|
|
@ -406,7 +405,16 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
||||||
# CONFIG_MTD_DOC2000 is not set
|
# CONFIG_MTD_DOC2000 is not set
|
||||||
# CONFIG_MTD_DOC2001 is not set
|
# CONFIG_MTD_DOC2001 is not set
|
||||||
# CONFIG_MTD_DOC2001PLUS is not set
|
# CONFIG_MTD_DOC2001PLUS is not set
|
||||||
# CONFIG_MTD_NAND is not set
|
CONFIG_MTD_NAND=y
|
||||||
|
CONFIG_MTD_NAND_VERIFY_WRITE=y
|
||||||
|
# CONFIG_MTD_NAND_ECC_SMC is not set
|
||||||
|
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
||||||
|
CONFIG_MTD_NAND_IDS=y
|
||||||
|
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
||||||
|
# CONFIG_MTD_NAND_CAFE is not set
|
||||||
|
# CONFIG_MTD_NAND_NANDSIM is not set
|
||||||
|
# CONFIG_MTD_NAND_PLATFORM is not set
|
||||||
|
# CONFIG_MTD_ALAUDA is not set
|
||||||
# CONFIG_MTD_ONENAND is not set
|
# CONFIG_MTD_ONENAND is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
|
|
@ -1178,7 +1186,17 @@ CONFIG_TMPFS=y
|
||||||
# CONFIG_BEFS_FS is not set
|
# CONFIG_BEFS_FS is not set
|
||||||
# CONFIG_BFS_FS is not set
|
# CONFIG_BFS_FS is not set
|
||||||
# CONFIG_EFS_FS is not set
|
# CONFIG_EFS_FS is not set
|
||||||
# CONFIG_JFFS2_FS is not set
|
CONFIG_JFFS2_FS=y
|
||||||
|
CONFIG_JFFS2_FS_DEBUG=0
|
||||||
|
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||||
|
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
||||||
|
# CONFIG_JFFS2_SUMMARY is not set
|
||||||
|
# CONFIG_JFFS2_FS_XATTR is not set
|
||||||
|
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||||
|
CONFIG_JFFS2_ZLIB=y
|
||||||
|
# CONFIG_JFFS2_LZO is not set
|
||||||
|
CONFIG_JFFS2_RTIME=y
|
||||||
|
# CONFIG_JFFS2_RUBIN is not set
|
||||||
# CONFIG_CRAMFS is not set
|
# CONFIG_CRAMFS is not set
|
||||||
# CONFIG_VXFS_FS is not set
|
# CONFIG_VXFS_FS is not set
|
||||||
# CONFIG_HPFS_FS is not set
|
# CONFIG_HPFS_FS is not set
|
||||||
|
|
@ -1242,6 +1260,8 @@ CONFIG_BITREVERSE=y
|
||||||
CONFIG_CRC32=y
|
CONFIG_CRC32=y
|
||||||
# CONFIG_CRC7 is not set
|
# CONFIG_CRC7 is not set
|
||||||
# CONFIG_LIBCRC32C is not set
|
# CONFIG_LIBCRC32C is not set
|
||||||
|
CONFIG_ZLIB_INFLATE=y
|
||||||
|
CONFIG_ZLIB_DEFLATE=y
|
||||||
CONFIG_PLIST=y
|
CONFIG_PLIST=y
|
||||||
CONFIG_HAS_IOMEM=y
|
CONFIG_HAS_IOMEM=y
|
||||||
CONFIG_HAS_IOPORT=y
|
CONFIG_HAS_IOPORT=y
|
||||||
|
|
|
||||||
|
|
@ -570,7 +570,8 @@ CONFIG_SATA_SIL=y
|
||||||
# CONFIG_PATA_SIS is not set
|
# CONFIG_PATA_SIS is not set
|
||||||
# CONFIG_PATA_VIA is not set
|
# CONFIG_PATA_VIA is not set
|
||||||
# CONFIG_PATA_WINBOND is not set
|
# CONFIG_PATA_WINBOND is not set
|
||||||
# CONFIG_PATA_PLATFORM is not set
|
CONFIG_PATA_PLATFORM=y
|
||||||
|
CONFIG_PATA_OF_PLATFORM=y
|
||||||
CONFIG_MD=y
|
CONFIG_MD=y
|
||||||
CONFIG_BLK_DEV_MD=y
|
CONFIG_BLK_DEV_MD=y
|
||||||
CONFIG_MD_LINEAR=y
|
CONFIG_MD_LINEAR=y
|
||||||
|
|
|
||||||
|
|
@ -696,7 +696,7 @@ CONFIG_SERIAL_8250_RSA=y
|
||||||
CONFIG_SERIAL_CORE=y
|
CONFIG_SERIAL_CORE=y
|
||||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||||
# CONFIG_SERIAL_JSM is not set
|
# CONFIG_SERIAL_JSM is not set
|
||||||
CONFIG_SERIAL_OF_PLATFORM=y
|
# CONFIG_SERIAL_OF_PLATFORM is not set
|
||||||
CONFIG_UNIX98_PTYS=y
|
CONFIG_UNIX98_PTYS=y
|
||||||
# CONFIG_LEGACY_PTYS is not set
|
# CONFIG_LEGACY_PTYS is not set
|
||||||
# CONFIG_IPMI_HANDLER is not set
|
# CONFIG_IPMI_HANDLER is not set
|
||||||
|
|
@ -708,7 +708,60 @@ CONFIG_UNIX98_PTYS=y
|
||||||
# CONFIG_RAW_DRIVER is not set
|
# CONFIG_RAW_DRIVER is not set
|
||||||
# CONFIG_TCG_TPM is not set
|
# CONFIG_TCG_TPM is not set
|
||||||
CONFIG_DEVPORT=y
|
CONFIG_DEVPORT=y
|
||||||
# CONFIG_I2C is not set
|
CONFIG_I2C=y
|
||||||
|
CONFIG_I2C_BOARDINFO=y
|
||||||
|
# CONFIG_I2C_CHARDEV is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# I2C Algorithms
|
||||||
|
#
|
||||||
|
# CONFIG_I2C_ALGOBIT is not set
|
||||||
|
# CONFIG_I2C_ALGOPCF is not set
|
||||||
|
# CONFIG_I2C_ALGOPCA is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# I2C Hardware Bus support
|
||||||
|
#
|
||||||
|
# CONFIG_I2C_ALI1535 is not set
|
||||||
|
# CONFIG_I2C_ALI1563 is not set
|
||||||
|
# CONFIG_I2C_ALI15X3 is not set
|
||||||
|
# CONFIG_I2C_AMD756 is not set
|
||||||
|
# CONFIG_I2C_AMD8111 is not set
|
||||||
|
# CONFIG_I2C_I801 is not set
|
||||||
|
# CONFIG_I2C_I810 is not set
|
||||||
|
# CONFIG_I2C_PIIX4 is not set
|
||||||
|
CONFIG_I2C_MPC=y
|
||||||
|
# CONFIG_I2C_NFORCE2 is not set
|
||||||
|
# CONFIG_I2C_OCORES is not set
|
||||||
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||||
|
# CONFIG_I2C_PROSAVAGE is not set
|
||||||
|
# CONFIG_I2C_SAVAGE4 is not set
|
||||||
|
# CONFIG_I2C_SIMTEC is not set
|
||||||
|
# CONFIG_I2C_SIS5595 is not set
|
||||||
|
# CONFIG_I2C_SIS630 is not set
|
||||||
|
# CONFIG_I2C_SIS96X is not set
|
||||||
|
# CONFIG_I2C_TAOS_EVM is not set
|
||||||
|
# CONFIG_I2C_VIA is not set
|
||||||
|
# CONFIG_I2C_VIAPRO is not set
|
||||||
|
# CONFIG_I2C_VOODOO3 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Miscellaneous I2C Chip support
|
||||||
|
#
|
||||||
|
# CONFIG_SENSORS_DS1337 is not set
|
||||||
|
# CONFIG_SENSORS_DS1374 is not set
|
||||||
|
# CONFIG_DS1682 is not set
|
||||||
|
# CONFIG_SENSORS_EEPROM is not set
|
||||||
|
# CONFIG_SENSORS_PCF8574 is not set
|
||||||
|
# CONFIG_SENSORS_PCA9539 is not set
|
||||||
|
# CONFIG_SENSORS_PCF8591 is not set
|
||||||
|
# CONFIG_SENSORS_M41T00 is not set
|
||||||
|
# CONFIG_SENSORS_MAX6875 is not set
|
||||||
|
# CONFIG_SENSORS_TSL2550 is not set
|
||||||
|
# CONFIG_I2C_DEBUG_CORE is not set
|
||||||
|
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||||
|
# CONFIG_I2C_DEBUG_BUS is not set
|
||||||
|
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
# SPI support
|
# SPI support
|
||||||
|
|
@ -763,7 +816,119 @@ CONFIG_DUMMY_CONSOLE=y
|
||||||
#
|
#
|
||||||
# Sound
|
# Sound
|
||||||
#
|
#
|
||||||
# CONFIG_SOUND is not set
|
CONFIG_SOUND=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Advanced Linux Sound Architecture
|
||||||
|
#
|
||||||
|
CONFIG_SND=y
|
||||||
|
CONFIG_SND_TIMER=y
|
||||||
|
CONFIG_SND_PCM=y
|
||||||
|
# CONFIG_SND_SEQUENCER is not set
|
||||||
|
CONFIG_SND_OSSEMUL=y
|
||||||
|
CONFIG_SND_MIXER_OSS=y
|
||||||
|
CONFIG_SND_PCM_OSS=y
|
||||||
|
# CONFIG_SND_PCM_OSS_PLUGINS is not set
|
||||||
|
# CONFIG_SND_DYNAMIC_MINORS is not set
|
||||||
|
# CONFIG_SND_SUPPORT_OLD_API is not set
|
||||||
|
CONFIG_SND_VERBOSE_PROCFS=y
|
||||||
|
# CONFIG_SND_VERBOSE_PRINTK is not set
|
||||||
|
# CONFIG_SND_DEBUG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Generic devices
|
||||||
|
#
|
||||||
|
# CONFIG_SND_DUMMY is not set
|
||||||
|
# CONFIG_SND_MTPAV is not set
|
||||||
|
# CONFIG_SND_SERIAL_U16550 is not set
|
||||||
|
# CONFIG_SND_MPU401 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# PCI devices
|
||||||
|
#
|
||||||
|
# CONFIG_SND_AD1889 is not set
|
||||||
|
# CONFIG_SND_ALS300 is not set
|
||||||
|
# CONFIG_SND_ALS4000 is not set
|
||||||
|
# CONFIG_SND_ALI5451 is not set
|
||||||
|
# CONFIG_SND_ATIIXP is not set
|
||||||
|
# CONFIG_SND_ATIIXP_MODEM is not set
|
||||||
|
# CONFIG_SND_AU8810 is not set
|
||||||
|
# CONFIG_SND_AU8820 is not set
|
||||||
|
# CONFIG_SND_AU8830 is not set
|
||||||
|
# CONFIG_SND_AZT3328 is not set
|
||||||
|
# CONFIG_SND_BT87X is not set
|
||||||
|
# CONFIG_SND_CA0106 is not set
|
||||||
|
# CONFIG_SND_CMIPCI is not set
|
||||||
|
# CONFIG_SND_CS4281 is not set
|
||||||
|
# CONFIG_SND_CS46XX is not set
|
||||||
|
# CONFIG_SND_CS5530 is not set
|
||||||
|
# CONFIG_SND_DARLA20 is not set
|
||||||
|
# CONFIG_SND_GINA20 is not set
|
||||||
|
# CONFIG_SND_LAYLA20 is not set
|
||||||
|
# CONFIG_SND_DARLA24 is not set
|
||||||
|
# CONFIG_SND_GINA24 is not set
|
||||||
|
# CONFIG_SND_LAYLA24 is not set
|
||||||
|
# CONFIG_SND_MONA is not set
|
||||||
|
# CONFIG_SND_MIA is not set
|
||||||
|
# CONFIG_SND_ECHO3G is not set
|
||||||
|
# CONFIG_SND_INDIGO is not set
|
||||||
|
# CONFIG_SND_INDIGOIO is not set
|
||||||
|
# CONFIG_SND_INDIGODJ is not set
|
||||||
|
# CONFIG_SND_EMU10K1 is not set
|
||||||
|
# CONFIG_SND_EMU10K1X is not set
|
||||||
|
# CONFIG_SND_ENS1370 is not set
|
||||||
|
# CONFIG_SND_ENS1371 is not set
|
||||||
|
# CONFIG_SND_ES1938 is not set
|
||||||
|
# CONFIG_SND_ES1968 is not set
|
||||||
|
# CONFIG_SND_FM801 is not set
|
||||||
|
# CONFIG_SND_HDA_INTEL is not set
|
||||||
|
# CONFIG_SND_HDSP is not set
|
||||||
|
# CONFIG_SND_HDSPM is not set
|
||||||
|
# CONFIG_SND_ICE1712 is not set
|
||||||
|
# CONFIG_SND_ICE1724 is not set
|
||||||
|
# CONFIG_SND_INTEL8X0 is not set
|
||||||
|
# CONFIG_SND_INTEL8X0M is not set
|
||||||
|
# CONFIG_SND_KORG1212 is not set
|
||||||
|
# CONFIG_SND_MAESTRO3 is not set
|
||||||
|
# CONFIG_SND_MIXART is not set
|
||||||
|
# CONFIG_SND_NM256 is not set
|
||||||
|
# CONFIG_SND_PCXHR is not set
|
||||||
|
# CONFIG_SND_RIPTIDE is not set
|
||||||
|
# CONFIG_SND_RME32 is not set
|
||||||
|
# CONFIG_SND_RME96 is not set
|
||||||
|
# CONFIG_SND_RME9652 is not set
|
||||||
|
# CONFIG_SND_SONICVIBES is not set
|
||||||
|
# CONFIG_SND_TRIDENT is not set
|
||||||
|
# CONFIG_SND_VIA82XX is not set
|
||||||
|
# CONFIG_SND_VIA82XX_MODEM is not set
|
||||||
|
# CONFIG_SND_VX222 is not set
|
||||||
|
# CONFIG_SND_YMFPCI is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ALSA PowerMac devices
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# ALSA PowerPC devices
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System on Chip audio support
|
||||||
|
#
|
||||||
|
CONFIG_SND_SOC=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# SoC Audio support for SuperH
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# ALSA SoC audio for Freescale SOCs
|
||||||
|
#
|
||||||
|
CONFIG_SND_SOC_MPC8610=y
|
||||||
|
CONFIG_SND_SOC_MPC8610_HPCD=y
|
||||||
|
CONFIG_SND_SOC_CS4270=y
|
||||||
|
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
|
||||||
|
|
||||||
CONFIG_HID_SUPPORT=y
|
CONFIG_HID_SUPPORT=y
|
||||||
CONFIG_HID=y
|
CONFIG_HID=y
|
||||||
# CONFIG_HID_DEBUG is not set
|
# CONFIG_HID_DEBUG is not set
|
||||||
|
|
|
||||||
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
|
|
@ -70,6 +70,7 @@ pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
|
||||||
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
|
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
|
||||||
pci-common.o
|
pci-common.o
|
||||||
obj-$(CONFIG_PCI_MSI) += msi.o
|
obj-$(CONFIG_PCI_MSI) += msi.o
|
||||||
|
obj-$(CONFIG_RAPIDIO) += rio.o
|
||||||
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
|
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
|
||||||
machine_kexec_$(CONFIG_WORD_SIZE).o
|
machine_kexec_$(CONFIG_WORD_SIZE).o
|
||||||
obj-$(CONFIG_AUDIT) += audit.o
|
obj-$(CONFIG_AUDIT) += audit.o
|
||||||
|
|
|
||||||
|
|
@ -73,8 +73,8 @@ _ENTRY(_start);
|
||||||
/* We try to not make any assumptions about how the boot loader
|
/* We try to not make any assumptions about how the boot loader
|
||||||
* setup or used the TLBs. We invalidate all mappings from the
|
* setup or used the TLBs. We invalidate all mappings from the
|
||||||
* boot loader and load a single entry in TLB1[0] to map the
|
* boot loader and load a single entry in TLB1[0] to map the
|
||||||
* first 16M of kernel memory. Any boot info passed from the
|
* first 64M of kernel memory. Any boot info passed from the
|
||||||
* bootloader needs to live in this first 16M.
|
* bootloader needs to live in this first 64M.
|
||||||
*
|
*
|
||||||
* Requirement on bootloader:
|
* Requirement on bootloader:
|
||||||
* - The page we're executing in needs to reside in TLB1 and
|
* - The page we're executing in needs to reside in TLB1 and
|
||||||
|
|
@ -167,7 +167,7 @@ skpinv: addi r6,r6,1 /* Increment */
|
||||||
mtspr SPRN_MAS0,r7
|
mtspr SPRN_MAS0,r7
|
||||||
tlbre
|
tlbre
|
||||||
|
|
||||||
/* Just modify the entry ID and EPN for the temp mapping */
|
/* Just modify the entry ID, EPN and RPN for the temp mapping */
|
||||||
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
|
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
|
||||||
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
|
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
|
||||||
mtspr SPRN_MAS0,r7
|
mtspr SPRN_MAS0,r7
|
||||||
|
|
@ -177,9 +177,12 @@ skpinv: addi r6,r6,1 /* Increment */
|
||||||
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
|
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
|
||||||
mtspr SPRN_MAS1,r6
|
mtspr SPRN_MAS1,r6
|
||||||
mfspr r6,SPRN_MAS2
|
mfspr r6,SPRN_MAS2
|
||||||
li r7,0 /* temp EPN = 0 */
|
lis r7,PHYSICAL_START@h
|
||||||
rlwimi r7,r6,0,20,31
|
rlwimi r7,r6,0,20,31
|
||||||
mtspr SPRN_MAS2,r7
|
mtspr SPRN_MAS2,r7
|
||||||
|
mfspr r6,SPRN_MAS3
|
||||||
|
rlwimi r7,r6,0,20,31
|
||||||
|
mtspr SPRN_MAS3,r7
|
||||||
tlbwe
|
tlbwe
|
||||||
|
|
||||||
xori r6,r4,1
|
xori r6,r4,1
|
||||||
|
|
@ -222,11 +225,11 @@ skpinv: addi r6,r6,1 /* Increment */
|
||||||
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
|
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
|
||||||
mtspr SPRN_MAS0,r6
|
mtspr SPRN_MAS0,r6
|
||||||
lis r6,(MAS1_VALID|MAS1_IPROT)@h
|
lis r6,(MAS1_VALID|MAS1_IPROT)@h
|
||||||
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l
|
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
|
||||||
mtspr SPRN_MAS1,r6
|
mtspr SPRN_MAS1,r6
|
||||||
li r7,0
|
li r7,0
|
||||||
lis r6,KERNELBASE@h
|
lis r6,PAGE_OFFSET@h
|
||||||
ori r6,r6,KERNELBASE@l
|
ori r6,r6,PAGE_OFFSET@l
|
||||||
rlwimi r6,r7,0,20,31
|
rlwimi r6,r7,0,20,31
|
||||||
mtspr SPRN_MAS2,r6
|
mtspr SPRN_MAS2,r6
|
||||||
li r7,(MAS3_SX|MAS3_SW|MAS3_SR)
|
li r7,(MAS3_SX|MAS3_SW|MAS3_SR)
|
||||||
|
|
@ -234,6 +237,9 @@ skpinv: addi r6,r6,1 /* Increment */
|
||||||
tlbwe
|
tlbwe
|
||||||
|
|
||||||
/* 7. Jump to KERNELBASE mapping */
|
/* 7. Jump to KERNELBASE mapping */
|
||||||
|
lis r6,KERNELBASE@h
|
||||||
|
ori r6,r6,KERNELBASE@l
|
||||||
|
rlwimi r6,r7,0,20,31
|
||||||
lis r7,MSR_KERNEL@h
|
lis r7,MSR_KERNEL@h
|
||||||
ori r7,r7,MSR_KERNEL@l
|
ori r7,r7,MSR_KERNEL@l
|
||||||
bl 1f /* Find our address */
|
bl 1f /* Find our address */
|
||||||
|
|
|
||||||
|
|
@ -792,9 +792,10 @@ static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
|
||||||
for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
|
for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
|
||||||
if ((res = bus->resource[i]) == NULL)
|
if ((res = bus->resource[i]) == NULL)
|
||||||
continue;
|
continue;
|
||||||
if (!res->flags || bus->self->transparent)
|
if (!res->flags)
|
||||||
|
continue;
|
||||||
|
if (i >= 3 && bus->self->transparent)
|
||||||
continue;
|
continue;
|
||||||
|
|
||||||
/* On PowerMac, Apple leaves bridge windows open over
|
/* On PowerMac, Apple leaves bridge windows open over
|
||||||
* an inaccessible region of memory space (0...fffff)
|
* an inaccessible region of memory space (0...fffff)
|
||||||
* which is somewhat bogus, but that's what they think
|
* which is somewhat bogus, but that's what they think
|
||||||
|
|
@ -806,7 +807,8 @@ static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
|
||||||
* equal to the pci_mem_offset of the host bridge and
|
* equal to the pci_mem_offset of the host bridge and
|
||||||
* their size is smaller than 1M.
|
* their size is smaller than 1M.
|
||||||
*/
|
*/
|
||||||
if (res->start == hose->pci_mem_offset &&
|
if (res->flags & IORESOURCE_MEM &&
|
||||||
|
res->start == hose->pci_mem_offset &&
|
||||||
res->end < 0x100000) {
|
res->end < 0x100000) {
|
||||||
printk(KERN_INFO
|
printk(KERN_INFO
|
||||||
"PCI: Closing bogus Apple Firmware"
|
"PCI: Closing bogus Apple Firmware"
|
||||||
|
|
|
||||||
|
|
@ -94,64 +94,6 @@ fixup_cpc710_pci64(struct pci_dev* dev)
|
||||||
}
|
}
|
||||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
|
||||||
|
|
||||||
|
|
||||||
void __init
|
|
||||||
update_bridge_resource(struct pci_dev *dev, struct resource *res)
|
|
||||||
{
|
|
||||||
u8 io_base_lo, io_limit_lo;
|
|
||||||
u16 mem_base, mem_limit;
|
|
||||||
u16 cmd;
|
|
||||||
resource_size_t start, end, off;
|
|
||||||
struct pci_controller *hose = dev->sysdata;
|
|
||||||
|
|
||||||
if (!hose) {
|
|
||||||
printk("update_bridge_base: no hose?\n");
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
||||||
pci_write_config_word(dev, PCI_COMMAND,
|
|
||||||
cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
|
|
||||||
if (res->flags & IORESOURCE_IO) {
|
|
||||||
off = (unsigned long) hose->io_base_virt - isa_io_base;
|
|
||||||
start = res->start - off;
|
|
||||||
end = res->end - off;
|
|
||||||
io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
|
|
||||||
io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
|
|
||||||
if (end > 0xffff)
|
|
||||||
io_base_lo |= PCI_IO_RANGE_TYPE_32;
|
|
||||||
else
|
|
||||||
io_base_lo |= PCI_IO_RANGE_TYPE_16;
|
|
||||||
pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
|
|
||||||
start >> 16);
|
|
||||||
pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
|
|
||||||
end >> 16);
|
|
||||||
pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
|
|
||||||
pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
|
|
||||||
|
|
||||||
} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
|
|
||||||
== IORESOURCE_MEM) {
|
|
||||||
off = hose->pci_mem_offset;
|
|
||||||
mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
|
|
||||||
mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
|
|
||||||
pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
|
|
||||||
pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
|
|
||||||
|
|
||||||
} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
|
|
||||||
== (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
|
|
||||||
off = hose->pci_mem_offset;
|
|
||||||
mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
|
|
||||||
mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
|
|
||||||
pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
|
|
||||||
pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
|
|
||||||
|
|
||||||
} else {
|
|
||||||
DBG(KERN_ERR "PCI: ugh, bridge %s res has flags=%lx\n",
|
|
||||||
pci_name(dev), res->flags);
|
|
||||||
}
|
|
||||||
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
#ifdef CONFIG_PPC_OF
|
#ifdef CONFIG_PPC_OF
|
||||||
/*
|
/*
|
||||||
* Functions below are used on OpenFirmware machines.
|
* Functions below are used on OpenFirmware machines.
|
||||||
|
|
|
||||||
|
|
@ -194,19 +194,39 @@
|
||||||
(X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
|
(X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
|
||||||
|
|
||||||
#ifndef __FP_FRAC_ADD_4
|
#ifndef __FP_FRAC_ADD_4
|
||||||
#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
|
#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
|
||||||
(r0 = x0 + y0, \
|
do { \
|
||||||
r1 = x1 + y1 + (r0 < x0), \
|
int _c1, _c2, _c3; \
|
||||||
r2 = x2 + y2 + (r1 < x1), \
|
r0 = x0 + y0; \
|
||||||
r3 = x3 + y3 + (r2 < x2))
|
_c1 = r0 < x0; \
|
||||||
|
r1 = x1 + y1; \
|
||||||
|
_c2 = r1 < x1; \
|
||||||
|
r1 += _c1; \
|
||||||
|
_c2 |= r1 < _c1; \
|
||||||
|
r2 = x2 + y2; \
|
||||||
|
_c3 = r2 < x2; \
|
||||||
|
r2 += _c2; \
|
||||||
|
_c3 |= r2 < _c2; \
|
||||||
|
r3 = x3 + y3 + _c3; \
|
||||||
|
} while (0)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifndef __FP_FRAC_SUB_4
|
#ifndef __FP_FRAC_SUB_4
|
||||||
#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
|
#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
|
||||||
(r0 = x0 - y0, \
|
do { \
|
||||||
r1 = x1 - y1 - (r0 > x0), \
|
int _c1, _c2, _c3; \
|
||||||
r2 = x2 - y2 - (r1 > x1), \
|
r0 = x0 - y0; \
|
||||||
r3 = x3 - y3 - (r2 > x2))
|
_c1 = r0 > x0; \
|
||||||
|
r1 = x1 - y1; \
|
||||||
|
_c2 = r1 > x1; \
|
||||||
|
r1 -= _c1; \
|
||||||
|
_c2 |= r1 > _c1; \
|
||||||
|
r2 = x2 - y2; \
|
||||||
|
_c3 = r2 > x2; \
|
||||||
|
r2 -= _c2; \
|
||||||
|
_c3 |= r2 > _c2; \
|
||||||
|
r3 = x3 - y3 - _c3; \
|
||||||
|
} while (0)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifndef __FP_FRAC_ADDI_4
|
#ifndef __FP_FRAC_ADDI_4
|
||||||
|
|
|
||||||
|
|
@ -165,15 +165,15 @@ void invalidate_tlbcam_entry(int index)
|
||||||
void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
|
void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
|
||||||
unsigned long cam2)
|
unsigned long cam2)
|
||||||
{
|
{
|
||||||
settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
|
settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
|
||||||
tlbcam_index++;
|
tlbcam_index++;
|
||||||
if (cam1) {
|
if (cam1) {
|
||||||
tlbcam_index++;
|
tlbcam_index++;
|
||||||
settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
|
settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
|
||||||
}
|
}
|
||||||
if (cam2) {
|
if (cam2) {
|
||||||
tlbcam_index++;
|
tlbcam_index++;
|
||||||
settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
|
settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -342,3 +342,16 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
int __init lmb_is_reserved(unsigned long addr)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for (i = 0; i < lmb.reserved.cnt; i++) {
|
||||||
|
unsigned long upper = lmb.reserved.region[i].base +
|
||||||
|
lmb.reserved.region[i].size - 1;
|
||||||
|
if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
|
||||||
|
|
@ -213,15 +213,30 @@ void __init do_init_bootmem(void)
|
||||||
*/
|
*/
|
||||||
#ifdef CONFIG_HIGHMEM
|
#ifdef CONFIG_HIGHMEM
|
||||||
free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
|
free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
|
||||||
|
|
||||||
|
/* reserve the sections we're already using */
|
||||||
|
for (i = 0; i < lmb.reserved.cnt; i++) {
|
||||||
|
unsigned long addr = lmb.reserved.region[i].base +
|
||||||
|
lmb_size_bytes(&lmb.reserved, i) - 1;
|
||||||
|
if (addr < total_lowmem)
|
||||||
|
reserve_bootmem(lmb.reserved.region[i].base,
|
||||||
|
lmb_size_bytes(&lmb.reserved, i));
|
||||||
|
else if (lmb.reserved.region[i].base < total_lowmem) {
|
||||||
|
unsigned long adjusted_size = total_lowmem -
|
||||||
|
lmb.reserved.region[i].base;
|
||||||
|
reserve_bootmem(lmb.reserved.region[i].base,
|
||||||
|
adjusted_size);
|
||||||
|
}
|
||||||
|
}
|
||||||
#else
|
#else
|
||||||
free_bootmem_with_active_regions(0, max_pfn);
|
free_bootmem_with_active_regions(0, max_pfn);
|
||||||
#endif
|
|
||||||
|
|
||||||
/* reserve the sections we're already using */
|
/* reserve the sections we're already using */
|
||||||
for (i = 0; i < lmb.reserved.cnt; i++)
|
for (i = 0; i < lmb.reserved.cnt; i++)
|
||||||
reserve_bootmem(lmb.reserved.region[i].base,
|
reserve_bootmem(lmb.reserved.region[i].base,
|
||||||
lmb_size_bytes(&lmb.reserved, i));
|
lmb_size_bytes(&lmb.reserved, i));
|
||||||
|
|
||||||
|
#endif
|
||||||
/* XXX need to clip this if using highmem? */
|
/* XXX need to clip this if using highmem? */
|
||||||
sparse_memory_present_with_active_regions(0);
|
sparse_memory_present_with_active_regions(0);
|
||||||
|
|
||||||
|
|
@ -334,11 +349,13 @@ void __init mem_init(void)
|
||||||
highmem_mapnr = total_lowmem >> PAGE_SHIFT;
|
highmem_mapnr = total_lowmem >> PAGE_SHIFT;
|
||||||
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
|
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
|
||||||
struct page *page = pfn_to_page(pfn);
|
struct page *page = pfn_to_page(pfn);
|
||||||
|
if (lmb_is_reserved(pfn << PAGE_SHIFT))
|
||||||
|
continue;
|
||||||
ClearPageReserved(page);
|
ClearPageReserved(page);
|
||||||
init_page_count(page);
|
init_page_count(page);
|
||||||
__free_page(page);
|
__free_page(page);
|
||||||
totalhigh_pages++;
|
totalhigh_pages++;
|
||||||
|
reservedpages--;
|
||||||
}
|
}
|
||||||
totalram_pages += totalhigh_pages;
|
totalram_pages += totalhigh_pages;
|
||||||
printk(KERN_DEBUG "High memory: %luk\n",
|
printk(KERN_DEBUG "High memory: %luk\n",
|
||||||
|
|
|
||||||
|
|
@ -26,6 +26,19 @@ config PQ2FADS
|
||||||
help
|
help
|
||||||
This option enables support for the PQ2FADS board
|
This option enables support for the PQ2FADS board
|
||||||
|
|
||||||
|
config EP8248E
|
||||||
|
bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)"
|
||||||
|
select 8272
|
||||||
|
select 8260
|
||||||
|
select FSL_SOC
|
||||||
|
select PPC_CPM_NEW_BINDING
|
||||||
|
select MDIO_BITBANG
|
||||||
|
help
|
||||||
|
This enables support for the Embedded Planet EP8248E board.
|
||||||
|
|
||||||
|
This board is also resold by Freescale as the QUICCStart
|
||||||
|
MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
|
||||||
|
|
||||||
endchoice
|
endchoice
|
||||||
|
|
||||||
config PQ2ADS
|
config PQ2ADS
|
||||||
|
|
|
||||||
|
|
@ -5,3 +5,4 @@ obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o
|
||||||
obj-$(CONFIG_CPM2) += pq2.o
|
obj-$(CONFIG_CPM2) += pq2.o
|
||||||
obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
|
obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
|
||||||
obj-$(CONFIG_PQ2FADS) += pq2fads.o
|
obj-$(CONFIG_PQ2FADS) += pq2fads.o
|
||||||
|
obj-$(CONFIG_EP8248E) += ep8248e.o
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,324 @@
|
||||||
|
/*
|
||||||
|
* Embedded Planet EP8248E support
|
||||||
|
*
|
||||||
|
* Copyright 2007 Freescale Semiconductor, Inc.
|
||||||
|
* Author: Scott Wood <scottwood@freescale.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by the
|
||||||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
* option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
#include <linux/fsl_devices.h>
|
||||||
|
#include <linux/mdio-bitbang.h>
|
||||||
|
#include <linux/of_platform.h>
|
||||||
|
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <asm/cpm2.h>
|
||||||
|
#include <asm/udbg.h>
|
||||||
|
#include <asm/machdep.h>
|
||||||
|
#include <asm/time.h>
|
||||||
|
#include <asm/mpc8260.h>
|
||||||
|
#include <asm/prom.h>
|
||||||
|
|
||||||
|
#include <sysdev/fsl_soc.h>
|
||||||
|
#include <sysdev/cpm2_pic.h>
|
||||||
|
|
||||||
|
#include "pq2.h"
|
||||||
|
|
||||||
|
static u8 __iomem *ep8248e_bcsr;
|
||||||
|
static struct device_node *ep8248e_bcsr_node;
|
||||||
|
|
||||||
|
#define BCSR7_SCC2_ENABLE 0x10
|
||||||
|
|
||||||
|
#define BCSR8_PHY1_ENABLE 0x80
|
||||||
|
#define BCSR8_PHY1_POWER 0x40
|
||||||
|
#define BCSR8_PHY2_ENABLE 0x20
|
||||||
|
#define BCSR8_PHY2_POWER 0x10
|
||||||
|
#define BCSR8_MDIO_READ 0x04
|
||||||
|
#define BCSR8_MDIO_CLOCK 0x02
|
||||||
|
#define BCSR8_MDIO_DATA 0x01
|
||||||
|
|
||||||
|
#define BCSR9_USB_ENABLE 0x80
|
||||||
|
#define BCSR9_USB_POWER 0x40
|
||||||
|
#define BCSR9_USB_HOST 0x20
|
||||||
|
#define BCSR9_USB_FULL_SPEED_TARGET 0x10
|
||||||
|
|
||||||
|
static void __init ep8248e_pic_init(void)
|
||||||
|
{
|
||||||
|
struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic");
|
||||||
|
if (!np) {
|
||||||
|
printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
cpm2_pic_init(np);
|
||||||
|
of_node_put(np);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
|
||||||
|
{
|
||||||
|
if (level)
|
||||||
|
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
|
||||||
|
else
|
||||||
|
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
|
||||||
|
|
||||||
|
/* Read back to flush the write. */
|
||||||
|
in_8(&ep8248e_bcsr[8]);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ep8248e_set_mdio_dir(struct mdiobb_ctrl *ctrl, int output)
|
||||||
|
{
|
||||||
|
if (output)
|
||||||
|
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
|
||||||
|
else
|
||||||
|
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
|
||||||
|
|
||||||
|
/* Read back to flush the write. */
|
||||||
|
in_8(&ep8248e_bcsr[8]);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ep8248e_set_mdio_data(struct mdiobb_ctrl *ctrl, int data)
|
||||||
|
{
|
||||||
|
if (data)
|
||||||
|
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
|
||||||
|
else
|
||||||
|
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
|
||||||
|
|
||||||
|
/* Read back to flush the write. */
|
||||||
|
in_8(&ep8248e_bcsr[8]);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ep8248e_get_mdio_data(struct mdiobb_ctrl *ctrl)
|
||||||
|
{
|
||||||
|
return in_8(&ep8248e_bcsr[8]) & BCSR8_MDIO_DATA;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct mdiobb_ops ep8248e_mdio_ops = {
|
||||||
|
.set_mdc = ep8248e_set_mdc,
|
||||||
|
.set_mdio_dir = ep8248e_set_mdio_dir,
|
||||||
|
.set_mdio_data = ep8248e_set_mdio_data,
|
||||||
|
.get_mdio_data = ep8248e_get_mdio_data,
|
||||||
|
.owner = THIS_MODULE,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct mdiobb_ctrl ep8248e_mdio_ctrl = {
|
||||||
|
.ops = &ep8248e_mdio_ops,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
|
||||||
|
const struct of_device_id *match)
|
||||||
|
{
|
||||||
|
struct mii_bus *bus;
|
||||||
|
struct resource res;
|
||||||
|
struct device_node *node;
|
||||||
|
int ret, i;
|
||||||
|
|
||||||
|
node = of_get_parent(ofdev->node);
|
||||||
|
of_node_put(node);
|
||||||
|
if (node != ep8248e_bcsr_node)
|
||||||
|
return -ENODEV;
|
||||||
|
|
||||||
|
ret = of_address_to_resource(ofdev->node, 0, &res);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
bus = alloc_mdio_bitbang(&ep8248e_mdio_ctrl);
|
||||||
|
if (!bus)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
bus->phy_mask = 0;
|
||||||
|
bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
|
||||||
|
|
||||||
|
for (i = 0; i < PHY_MAX_ADDR; i++)
|
||||||
|
bus->irq[i] = -1;
|
||||||
|
|
||||||
|
bus->name = "ep8248e-mdio-bitbang";
|
||||||
|
bus->dev = &ofdev->dev;
|
||||||
|
bus->id = res.start;
|
||||||
|
|
||||||
|
return mdiobus_register(bus);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ep8248e_mdio_remove(struct of_device *ofdev)
|
||||||
|
{
|
||||||
|
BUG();
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct of_device_id ep8248e_mdio_match[] = {
|
||||||
|
{
|
||||||
|
.compatible = "fsl,ep8248e-mdio-bitbang",
|
||||||
|
},
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct of_platform_driver ep8248e_mdio_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = "ep8248e-mdio-bitbang",
|
||||||
|
},
|
||||||
|
.match_table = ep8248e_mdio_match,
|
||||||
|
.probe = ep8248e_mdio_probe,
|
||||||
|
.remove = ep8248e_mdio_remove,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct cpm_pin {
|
||||||
|
int port, pin, flags;
|
||||||
|
};
|
||||||
|
|
||||||
|
static __initdata struct cpm_pin ep8248e_pins[] = {
|
||||||
|
/* SMC1 */
|
||||||
|
{2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
|
||||||
|
/* SCC1 */
|
||||||
|
{2, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
|
||||||
|
/* FCC1 */
|
||||||
|
{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
|
||||||
|
{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
|
||||||
|
{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
|
||||||
|
{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
|
||||||
|
{2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
|
||||||
|
/* FCC2 */
|
||||||
|
{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
|
||||||
|
/* I2C */
|
||||||
|
{4, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
|
||||||
|
{4, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
|
||||||
|
|
||||||
|
/* USB */
|
||||||
|
{2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
|
{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init init_ioports(void)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for (i = 0; i < ARRAY_SIZE(ep8248e_pins); i++) {
|
||||||
|
const struct cpm_pin *pin = &ep8248e_pins[i];
|
||||||
|
cpm2_set_pin(pin->port, pin->pin, pin->flags);
|
||||||
|
}
|
||||||
|
|
||||||
|
cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7);
|
||||||
|
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
|
||||||
|
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
|
||||||
|
cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); /* USB */
|
||||||
|
cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
|
||||||
|
cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
|
||||||
|
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
|
||||||
|
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void __init ep8248e_setup_arch(void)
|
||||||
|
{
|
||||||
|
if (ppc_md.progress)
|
||||||
|
ppc_md.progress("ep8248e_setup_arch()", 0);
|
||||||
|
|
||||||
|
cpm2_reset();
|
||||||
|
|
||||||
|
/* When this is set, snooping CPM DMA from RAM causes
|
||||||
|
* machine checks. See erratum SIU18.
|
||||||
|
*/
|
||||||
|
clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
|
||||||
|
|
||||||
|
ep8248e_bcsr_node =
|
||||||
|
of_find_compatible_node(NULL, NULL, "fsl,ep8248e-bcsr");
|
||||||
|
if (!ep8248e_bcsr_node) {
|
||||||
|
printk(KERN_ERR "No bcsr in device tree\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0);
|
||||||
|
if (!ep8248e_bcsr) {
|
||||||
|
printk(KERN_ERR "Cannot map BCSR registers\n");
|
||||||
|
of_node_put(ep8248e_bcsr_node);
|
||||||
|
ep8248e_bcsr_node = NULL;
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
setbits8(&ep8248e_bcsr[7], BCSR7_SCC2_ENABLE);
|
||||||
|
setbits8(&ep8248e_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER |
|
||||||
|
BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER);
|
||||||
|
|
||||||
|
init_ioports();
|
||||||
|
|
||||||
|
if (ppc_md.progress)
|
||||||
|
ppc_md.progress("ep8248e_setup_arch(), finish", 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static __initdata struct of_device_id of_bus_ids[] = {
|
||||||
|
{ .compatible = "simple-bus", },
|
||||||
|
{ .compatible = "fsl,ep8248e-bcsr", },
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init declare_of_platform_devices(void)
|
||||||
|
{
|
||||||
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||||
|
of_register_platform_driver(&ep8248e_mdio_driver);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
machine_device_initcall(ep8248e, declare_of_platform_devices);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Called very early, device-tree isn't unflattened
|
||||||
|
*/
|
||||||
|
static int __init ep8248e_probe(void)
|
||||||
|
{
|
||||||
|
unsigned long root = of_get_flat_dt_root();
|
||||||
|
return of_flat_dt_is_compatible(root, "fsl,ep8248e");
|
||||||
|
}
|
||||||
|
|
||||||
|
define_machine(ep8248e)
|
||||||
|
{
|
||||||
|
.name = "Embedded Planet EP8248E",
|
||||||
|
.probe = ep8248e_probe,
|
||||||
|
.setup_arch = ep8248e_setup_arch,
|
||||||
|
.init_IRQ = ep8248e_pic_init,
|
||||||
|
.get_irq = cpm2_get_irq,
|
||||||
|
.calibrate_decr = generic_calibrate_decr,
|
||||||
|
.restart = pq2_restart,
|
||||||
|
.progress = udbg_progress,
|
||||||
|
};
|
||||||
|
|
@ -14,6 +14,7 @@
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <linux/pci.h>
|
#include <linux/pci.h>
|
||||||
|
#include <linux/of_platform.h>
|
||||||
|
|
||||||
#include <asm/time.h>
|
#include <asm/time.h>
|
||||||
#include <asm/ipic.h>
|
#include <asm/ipic.h>
|
||||||
|
|
@ -75,6 +76,18 @@ static int __init mpc8313_rdb_probe(void)
|
||||||
return of_flat_dt_is_compatible(root, "MPC8313ERDB");
|
return of_flat_dt_is_compatible(root, "MPC8313ERDB");
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static struct of_device_id __initdata of_bus_ids[] = {
|
||||||
|
{ .compatible = "simple-bus" },
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init declare_of_platform_devices(void)
|
||||||
|
{
|
||||||
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
machine_device_initcall(mpc8313_rdb, declare_of_platform_devices);
|
||||||
|
|
||||||
define_machine(mpc8313_rdb) {
|
define_machine(mpc8313_rdb) {
|
||||||
.name = "MPC8313 RDB",
|
.name = "MPC8313 RDB",
|
||||||
.probe = mpc8313_rdb_probe,
|
.probe = mpc8313_rdb_probe,
|
||||||
|
|
|
||||||
|
|
@ -110,15 +110,12 @@ static struct of_device_id mpc832x_ids[] = {
|
||||||
|
|
||||||
static int __init mpc832x_declare_of_platform_devices(void)
|
static int __init mpc832x_declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
if (!machine_is(mpc832x_mds))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
/* Publish the QE devices */
|
/* Publish the QE devices */
|
||||||
of_platform_bus_probe(NULL, mpc832x_ids, NULL);
|
of_platform_bus_probe(NULL, mpc832x_ids, NULL);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(mpc832x_declare_of_platform_devices);
|
machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);
|
||||||
|
|
||||||
static void __init mpc832x_sys_init_IRQ(void)
|
static void __init mpc832x_sys_init_IRQ(void)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -63,9 +63,6 @@ static struct spi_board_info mpc832x_spi_boardinfo = {
|
||||||
|
|
||||||
static int __init mpc832x_spi_init(void)
|
static int __init mpc832x_spi_init(void)
|
||||||
{
|
{
|
||||||
if (!machine_is(mpc832x_rdb))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */
|
par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */
|
||||||
par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */
|
par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */
|
||||||
par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */
|
par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */
|
||||||
|
|
@ -80,7 +77,7 @@ static int __init mpc832x_spi_init(void)
|
||||||
mpc83xx_spi_deactivate_cs);
|
mpc83xx_spi_deactivate_cs);
|
||||||
}
|
}
|
||||||
|
|
||||||
device_initcall(mpc832x_spi_init);
|
machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
|
||||||
|
|
||||||
/* ************************************************************************
|
/* ************************************************************************
|
||||||
*
|
*
|
||||||
|
|
@ -123,15 +120,12 @@ static struct of_device_id mpc832x_ids[] = {
|
||||||
|
|
||||||
static int __init mpc832x_declare_of_platform_devices(void)
|
static int __init mpc832x_declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
if (!machine_is(mpc832x_rdb))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
/* Publish the QE devices */
|
/* Publish the QE devices */
|
||||||
of_platform_bus_probe(NULL, mpc832x_ids, NULL);
|
of_platform_bus_probe(NULL, mpc832x_ids, NULL);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(mpc832x_declare_of_platform_devices);
|
machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
|
||||||
|
|
||||||
void __init mpc832x_rdb_init_IRQ(void)
|
void __init mpc832x_rdb_init_IRQ(void)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -23,6 +23,7 @@
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
#include <linux/seq_file.h>
|
#include <linux/seq_file.h>
|
||||||
#include <linux/root_dev.h>
|
#include <linux/root_dev.h>
|
||||||
|
#include <linux/of_platform.h>
|
||||||
|
|
||||||
#include <asm/system.h>
|
#include <asm/system.h>
|
||||||
#include <asm/atomic.h>
|
#include <asm/atomic.h>
|
||||||
|
|
@ -37,6 +38,17 @@
|
||||||
|
|
||||||
#include "mpc83xx.h"
|
#include "mpc83xx.h"
|
||||||
|
|
||||||
|
static struct of_device_id __initdata mpc834x_itx_ids[] = {
|
||||||
|
{ .compatible = "fsl,pq2pro-localbus", },
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init mpc834x_itx_declare_of_platform_devices(void)
|
||||||
|
{
|
||||||
|
return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
|
||||||
|
}
|
||||||
|
machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
|
||||||
|
|
||||||
/* ************************************************************************
|
/* ************************************************************************
|
||||||
*
|
*
|
||||||
* Setup the architecture
|
* Setup the architecture
|
||||||
|
|
|
||||||
|
|
@ -115,13 +115,10 @@ static struct of_device_id mpc834x_ids[] = {
|
||||||
|
|
||||||
static int __init mpc834x_declare_of_platform_devices(void)
|
static int __init mpc834x_declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
if (!machine_is(mpc834x_mds))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
of_platform_bus_probe(NULL, mpc834x_ids, NULL);
|
of_platform_bus_probe(NULL, mpc834x_ids, NULL);
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(mpc834x_declare_of_platform_devices);
|
machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Called very early, MMU is off, device-tree isn't unflattened
|
* Called very early, MMU is off, device-tree isn't unflattened
|
||||||
|
|
|
||||||
|
|
@ -141,15 +141,12 @@ static struct of_device_id mpc836x_ids[] = {
|
||||||
|
|
||||||
static int __init mpc836x_declare_of_platform_devices(void)
|
static int __init mpc836x_declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
if (!machine_is(mpc836x_mds))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
/* Publish the QE devices */
|
/* Publish the QE devices */
|
||||||
of_platform_bus_probe(NULL, mpc836x_ids, NULL);
|
of_platform_bus_probe(NULL, mpc836x_ids, NULL);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(mpc836x_declare_of_platform_devices);
|
machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
|
||||||
|
|
||||||
static void __init mpc836x_mds_init_IRQ(void)
|
static void __init mpc836x_mds_init_IRQ(void)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -22,6 +22,56 @@
|
||||||
|
|
||||||
#include "mpc83xx.h"
|
#include "mpc83xx.h"
|
||||||
|
|
||||||
|
#define BCSR12_USB_SER_MASK 0x8a
|
||||||
|
#define BCSR12_USB_SER_PIN 0x80
|
||||||
|
#define BCSR12_USB_SER_DEVICE 0x02
|
||||||
|
extern int mpc837x_usb_cfg(void);
|
||||||
|
|
||||||
|
static int mpc837xmds_usb_cfg(void)
|
||||||
|
{
|
||||||
|
struct device_node *np;
|
||||||
|
const void *phy_type, *mode;
|
||||||
|
void __iomem *bcsr_regs = NULL;
|
||||||
|
u8 bcsr12;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = mpc837x_usb_cfg();
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
/* Map BCSR area */
|
||||||
|
np = of_find_node_by_name(NULL, "bcsr");
|
||||||
|
if (np) {
|
||||||
|
struct resource res;
|
||||||
|
|
||||||
|
of_address_to_resource(np, 0, &res);
|
||||||
|
bcsr_regs = ioremap(res.start, res.end - res.start + 1);
|
||||||
|
of_node_put(np);
|
||||||
|
}
|
||||||
|
if (!bcsr_regs)
|
||||||
|
return -1;
|
||||||
|
|
||||||
|
np = of_find_node_by_name(NULL, "usb");
|
||||||
|
if (!np)
|
||||||
|
return -ENODEV;
|
||||||
|
phy_type = of_get_property(np, "phy_type", NULL);
|
||||||
|
if (phy_type && !strcmp(phy_type, "ulpi")) {
|
||||||
|
clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
|
||||||
|
} else if (phy_type && !strcmp(phy_type, "serial")) {
|
||||||
|
mode = of_get_property(np, "dr_mode", NULL);
|
||||||
|
bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK;
|
||||||
|
bcsr12 |= BCSR12_USB_SER_PIN;
|
||||||
|
if (mode && !strcmp(mode, "peripheral"))
|
||||||
|
bcsr12 |= BCSR12_USB_SER_DEVICE;
|
||||||
|
out_8(bcsr_regs + 12, bcsr12);
|
||||||
|
} else {
|
||||||
|
printk(KERN_ERR "USB DR: unsupported PHY\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
of_node_put(np);
|
||||||
|
iounmap(bcsr_regs);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
/* ************************************************************************
|
/* ************************************************************************
|
||||||
*
|
*
|
||||||
* Setup the architecture
|
* Setup the architecture
|
||||||
|
|
@ -40,6 +90,7 @@ static void __init mpc837x_mds_setup_arch(void)
|
||||||
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
|
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
|
||||||
mpc83xx_add_bridge(np);
|
mpc83xx_add_bridge(np);
|
||||||
#endif
|
#endif
|
||||||
|
mpc837xmds_usb_cfg();
|
||||||
}
|
}
|
||||||
|
|
||||||
static struct of_device_id mpc837x_ids[] = {
|
static struct of_device_id mpc837x_ids[] = {
|
||||||
|
|
@ -50,15 +101,12 @@ static struct of_device_id mpc837x_ids[] = {
|
||||||
|
|
||||||
static int __init mpc837x_declare_of_platform_devices(void)
|
static int __init mpc837x_declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
if (!machine_is(mpc837x_mds))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
/* Publish of_device */
|
/* Publish of_device */
|
||||||
of_platform_bus_probe(NULL, mpc837x_ids, NULL);
|
of_platform_bus_probe(NULL, mpc837x_ids, NULL);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(mpc837x_declare_of_platform_devices);
|
machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
|
||||||
|
|
||||||
static void __init mpc837x_mds_init_IRQ(void)
|
static void __init mpc837x_mds_init_IRQ(void)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -14,6 +14,7 @@
|
||||||
#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
|
#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
|
||||||
#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
|
#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
|
||||||
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
|
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
|
||||||
|
#define MPC837X_SCCR_USB_DRCM_11 0x00c00000
|
||||||
|
|
||||||
/* system i/o configuration register low */
|
/* system i/o configuration register low */
|
||||||
#define MPC83XX_SICRL_OFFS 0x114
|
#define MPC83XX_SICRL_OFFS 0x114
|
||||||
|
|
@ -22,6 +23,8 @@
|
||||||
#define MPC834X_SICRL_USB1 0x20000000
|
#define MPC834X_SICRL_USB1 0x20000000
|
||||||
#define MPC831X_SICRL_USB_MASK 0x00000c00
|
#define MPC831X_SICRL_USB_MASK 0x00000c00
|
||||||
#define MPC831X_SICRL_USB_ULPI 0x00000800
|
#define MPC831X_SICRL_USB_ULPI 0x00000800
|
||||||
|
#define MPC837X_SICRL_USB_MASK 0xf0000000
|
||||||
|
#define MPC837X_SICRL_USB_ULPI 0x50000000
|
||||||
|
|
||||||
/* system i/o configuration register high */
|
/* system i/o configuration register high */
|
||||||
#define MPC83XX_SICRH_OFFS 0x118
|
#define MPC83XX_SICRH_OFFS 0x118
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ int mpc834x_usb_cfg(void)
|
||||||
sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
|
sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
|
||||||
sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
|
sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
|
||||||
|
|
||||||
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
|
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
|
||||||
if (np) {
|
if (np) {
|
||||||
sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
|
sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
|
||||||
|
|
||||||
|
|
@ -67,7 +67,7 @@ int mpc834x_usb_cfg(void)
|
||||||
port0_is_dr = 1;
|
port0_is_dr = 1;
|
||||||
of_node_put(np);
|
of_node_put(np);
|
||||||
}
|
}
|
||||||
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph");
|
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
|
||||||
if (np) {
|
if (np) {
|
||||||
sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
|
sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
|
||||||
|
|
||||||
|
|
@ -111,7 +111,7 @@ int mpc831x_usb_cfg(void)
|
||||||
const void *dr_mode;
|
const void *dr_mode;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
|
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
|
||||||
if (!np)
|
if (!np)
|
||||||
return -ENODEV;
|
return -ENODEV;
|
||||||
prop = of_get_property(np, "phy_type", NULL);
|
prop = of_get_property(np, "phy_type", NULL);
|
||||||
|
|
@ -179,3 +179,43 @@ int mpc831x_usb_cfg(void)
|
||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
#endif /* CONFIG_PPC_MPC831x */
|
#endif /* CONFIG_PPC_MPC831x */
|
||||||
|
|
||||||
|
#ifdef CONFIG_PPC_MPC837x
|
||||||
|
int mpc837x_usb_cfg(void)
|
||||||
|
{
|
||||||
|
void __iomem *immap;
|
||||||
|
struct device_node *np = NULL;
|
||||||
|
const void *prop;
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
|
||||||
|
if (!np)
|
||||||
|
return -ENODEV;
|
||||||
|
prop = of_get_property(np, "phy_type", NULL);
|
||||||
|
|
||||||
|
if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
|
||||||
|
printk(KERN_WARNING "837x USB PHY type not supported\n");
|
||||||
|
of_node_put(np);
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Map IMMR space for pin and clock settings */
|
||||||
|
immap = ioremap(get_immrbase(), 0x1000);
|
||||||
|
if (!immap) {
|
||||||
|
of_node_put(np);
|
||||||
|
return -ENOMEM;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Configure clock */
|
||||||
|
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
|
||||||
|
MPC837X_SCCR_USB_DRCM_11);
|
||||||
|
|
||||||
|
/* Configure pin mux for ULPI/serial */
|
||||||
|
clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
|
||||||
|
MPC837X_SICRL_USB_ULPI);
|
||||||
|
|
||||||
|
iounmap(immap);
|
||||||
|
of_node_put(np);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
#endif /* CONFIG_PPC_MPC837x */
|
||||||
|
|
|
||||||
|
|
@ -52,9 +52,9 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
|
||||||
{
|
{
|
||||||
int cascade_irq;
|
int cascade_irq;
|
||||||
|
|
||||||
while ((cascade_irq = cpm2_get_irq()) >= 0) {
|
while ((cascade_irq = cpm2_get_irq()) >= 0)
|
||||||
generic_handle_irq(cascade_irq);
|
generic_handle_irq(cascade_irq);
|
||||||
}
|
|
||||||
desc->chip->eoi(irq);
|
desc->chip->eoi(irq);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -70,13 +70,12 @@ static void __init mpc85xx_ads_pic_init(void)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
np = of_find_node_by_type(np, "open-pic");
|
np = of_find_node_by_type(np, "open-pic");
|
||||||
|
if (!np) {
|
||||||
if (np == NULL) {
|
|
||||||
printk(KERN_ERR "Could not find open-pic node\n");
|
printk(KERN_ERR "Could not find open-pic node\n");
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
if(of_address_to_resource(np, 0, &r)) {
|
if (of_address_to_resource(np, 0, &r)) {
|
||||||
printk(KERN_ERR "Could not map mpic register space\n");
|
printk(KERN_ERR "Could not map mpic register space\n");
|
||||||
of_node_put(np);
|
of_node_put(np);
|
||||||
return;
|
return;
|
||||||
|
|
@ -100,6 +99,7 @@ static void __init mpc85xx_ads_pic_init(void)
|
||||||
irq = irq_of_parse_and_map(np, 0);
|
irq = irq_of_parse_and_map(np, 0);
|
||||||
|
|
||||||
cpm2_pic_init(np);
|
cpm2_pic_init(np);
|
||||||
|
of_node_put(np);
|
||||||
set_irq_chained_handler(irq, cpm2_cascade);
|
set_irq_chained_handler(irq, cpm2_cascade);
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
@ -112,7 +112,7 @@ struct cpm_pin {
|
||||||
int port, pin, flags;
|
int port, pin, flags;
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct cpm_pin mpc8560_ads_pins[] = {
|
static const struct cpm_pin mpc8560_ads_pins[] = {
|
||||||
/* SCC1 */
|
/* SCC1 */
|
||||||
{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
|
||||||
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
|
@ -233,13 +233,11 @@ static struct of_device_id __initdata of_bus_ids[] = {
|
||||||
|
|
||||||
static int __init declare_of_platform_devices(void)
|
static int __init declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
if (!machine_is(mpc85xx_ads))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(declare_of_platform_devices);
|
machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Called very early, device-tree isn't unflattened
|
* Called very early, device-tree isn't unflattened
|
||||||
|
|
|
||||||
|
|
@ -222,9 +222,6 @@ static int mpc85xx_cds_8259_attach(void)
|
||||||
struct device_node *cascade_node = NULL;
|
struct device_node *cascade_node = NULL;
|
||||||
int cascade_irq;
|
int cascade_irq;
|
||||||
|
|
||||||
if (!machine_is(mpc85xx_cds))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
/* Initialize the i8259 controller */
|
/* Initialize the i8259 controller */
|
||||||
for_each_node_by_type(np, "interrupt-controller")
|
for_each_node_by_type(np, "interrupt-controller")
|
||||||
if (of_device_is_compatible(np, "chrp,iic")) {
|
if (of_device_is_compatible(np, "chrp,iic")) {
|
||||||
|
|
@ -262,8 +259,7 @@ static int mpc85xx_cds_8259_attach(void)
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
|
||||||
device_initcall(mpc85xx_cds_8259_attach);
|
|
||||||
|
|
||||||
#endif /* CONFIG_PPC_I8259 */
|
#endif /* CONFIG_PPC_I8259 */
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -144,15 +144,12 @@ static struct of_device_id mpc85xx_ids[] = {
|
||||||
|
|
||||||
static int __init mpc85xx_publish_devices(void)
|
static int __init mpc85xx_publish_devices(void)
|
||||||
{
|
{
|
||||||
if (!machine_is(mpc85xx_mds))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
/* Publish the QE devices */
|
/* Publish the QE devices */
|
||||||
of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
|
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(mpc85xx_publish_devices);
|
machine_device_initcall(mpc85xx_mds, mpc85xx_publish_devices);
|
||||||
|
|
||||||
static void __init mpc85xx_mds_pic_init(void)
|
static void __init mpc85xx_mds_pic_init(void)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -34,9 +34,24 @@
|
||||||
|
|
||||||
#include <asm/mpic.h>
|
#include <asm/mpic.h>
|
||||||
|
|
||||||
|
#include <linux/of_platform.h>
|
||||||
#include <sysdev/fsl_pci.h>
|
#include <sysdev/fsl_pci.h>
|
||||||
#include <sysdev/fsl_soc.h>
|
#include <sysdev/fsl_soc.h>
|
||||||
|
|
||||||
|
static struct of_device_id __initdata mpc8610_ids[] = {
|
||||||
|
{ .compatible = "fsl,mpc8610-immr", },
|
||||||
|
{}
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init mpc8610_declare_of_platform_devices(void)
|
||||||
|
{
|
||||||
|
/* Without this call, the SSI device driver won't get probed. */
|
||||||
|
of_platform_bus_probe(NULL, mpc8610_ids, NULL);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
|
||||||
|
|
||||||
void __init
|
void __init
|
||||||
mpc86xx_hpcd_init_irq(void)
|
mpc86xx_hpcd_init_irq(void)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -18,6 +18,7 @@
|
||||||
#include <linux/kdev_t.h>
|
#include <linux/kdev_t.h>
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
#include <linux/seq_file.h>
|
#include <linux/seq_file.h>
|
||||||
|
#include <linux/of_platform.h>
|
||||||
|
|
||||||
#include <asm/system.h>
|
#include <asm/system.h>
|
||||||
#include <asm/time.h>
|
#include <asm/time.h>
|
||||||
|
|
@ -212,6 +213,19 @@ mpc86xx_time_init(void)
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static __initdata struct of_device_id of_bus_ids[] = {
|
||||||
|
{ .compatible = "simple-bus", },
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init declare_of_platform_devices(void)
|
||||||
|
{
|
||||||
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
|
||||||
|
|
||||||
define_machine(mpc86xx_hpcn) {
|
define_machine(mpc86xx_hpcn) {
|
||||||
.name = "MPC86xx HPCN",
|
.name = "MPC86xx HPCN",
|
||||||
.probe = mpc86xx_hpcn_probe,
|
.probe = mpc86xx_hpcn_probe,
|
||||||
|
|
|
||||||
|
|
@ -44,6 +44,15 @@ config PPC_EP88XC
|
||||||
This board is also resold by Freescale as the QUICCStart
|
This board is also resold by Freescale as the QUICCStart
|
||||||
MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
|
MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
|
||||||
|
|
||||||
|
config PPC_ADDER875
|
||||||
|
bool "Analogue & Micro Adder 875"
|
||||||
|
select CPM1
|
||||||
|
select PPC_CPM_NEW_BINDING
|
||||||
|
select REDBOOT
|
||||||
|
help
|
||||||
|
This enables support for the Analogue & Micro Adder 875
|
||||||
|
board.
|
||||||
|
|
||||||
endchoice
|
endchoice
|
||||||
|
|
||||||
menu "Freescale Ethernet driver platform-specific options"
|
menu "Freescale Ethernet driver platform-specific options"
|
||||||
|
|
|
||||||
|
|
@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_8xx) += m8xx_setup.o
|
||||||
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
|
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
|
||||||
obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
|
obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
|
||||||
obj-$(CONFIG_PPC_EP88XC) += ep88xc.o
|
obj-$(CONFIG_PPC_EP88XC) += ep88xc.o
|
||||||
|
obj-$(CONFIG_PPC_ADDER875) += adder875.o
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,118 @@
|
||||||
|
/* Analogue & Micro Adder MPC875 board support
|
||||||
|
*
|
||||||
|
* Author: Scott Wood <scottwood@freescale.com>
|
||||||
|
*
|
||||||
|
* Copyright (c) 2007 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License, version 2, as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/fs_enet_pd.h>
|
||||||
|
#include <linux/of_platform.h>
|
||||||
|
|
||||||
|
#include <asm/time.h>
|
||||||
|
#include <asm/machdep.h>
|
||||||
|
#include <asm/commproc.h>
|
||||||
|
#include <asm/fs_pd.h>
|
||||||
|
#include <asm/udbg.h>
|
||||||
|
#include <asm/prom.h>
|
||||||
|
|
||||||
|
#include <sysdev/commproc.h>
|
||||||
|
|
||||||
|
struct cpm_pin {
|
||||||
|
int port, pin, flags;
|
||||||
|
};
|
||||||
|
|
||||||
|
static __initdata struct cpm_pin adder875_pins[] = {
|
||||||
|
/* SMC1 */
|
||||||
|
{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
|
||||||
|
{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
|
||||||
|
|
||||||
|
/* MII1 */
|
||||||
|
{CPM_PORTA, 0, CPM_PIN_INPUT},
|
||||||
|
{CPM_PORTA, 1, CPM_PIN_INPUT},
|
||||||
|
{CPM_PORTA, 2, CPM_PIN_INPUT},
|
||||||
|
{CPM_PORTA, 3, CPM_PIN_INPUT},
|
||||||
|
{CPM_PORTA, 4, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTA, 10, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTA, 11, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTB, 19, CPM_PIN_INPUT},
|
||||||
|
{CPM_PORTB, 31, CPM_PIN_INPUT},
|
||||||
|
{CPM_PORTC, 12, CPM_PIN_INPUT},
|
||||||
|
{CPM_PORTC, 13, CPM_PIN_INPUT},
|
||||||
|
{CPM_PORTE, 30, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 31, CPM_PIN_OUTPUT},
|
||||||
|
|
||||||
|
/* MII2 */
|
||||||
|
{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{CPM_PORTE, 16, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||||
|
{CPM_PORTE, 21, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 22, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 23, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 24, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 25, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 26, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 27, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
|
||||||
|
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init init_ioports(void)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) {
|
||||||
|
const struct cpm_pin *pin = &adder875_pins[i];
|
||||||
|
cpm1_set_pin(pin->port, pin->pin, pin->flags);
|
||||||
|
}
|
||||||
|
|
||||||
|
cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
|
||||||
|
|
||||||
|
/* Set FEC1 and FEC2 to MII mode */
|
||||||
|
clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void __init adder875_setup(void)
|
||||||
|
{
|
||||||
|
cpm_reset();
|
||||||
|
init_ioports();
|
||||||
|
}
|
||||||
|
|
||||||
|
static int __init adder875_probe(void)
|
||||||
|
{
|
||||||
|
unsigned long root = of_get_flat_dt_root();
|
||||||
|
return of_flat_dt_is_compatible(root, "analogue-and-micro,adder875");
|
||||||
|
}
|
||||||
|
|
||||||
|
static __initdata struct of_device_id of_bus_ids[] = {
|
||||||
|
{ .compatible = "simple-bus", },
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init declare_of_platform_devices(void)
|
||||||
|
{
|
||||||
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
machine_device_initcall(adder875, declare_of_platform_devices);
|
||||||
|
|
||||||
|
define_machine(adder875) {
|
||||||
|
.name = "Adder MPC875",
|
||||||
|
.probe = adder875_probe,
|
||||||
|
.setup_arch = adder875_setup,
|
||||||
|
.init_IRQ = m8xx_pic_init,
|
||||||
|
.get_irq = mpc8xx_get_irq,
|
||||||
|
.restart = mpc8xx_restart,
|
||||||
|
.calibrate_decr = generic_calibrate_decr,
|
||||||
|
.set_rtc_time = mpc8xx_set_rtc_time,
|
||||||
|
.get_rtc_time = mpc8xx_get_rtc_time,
|
||||||
|
.progress = udbg_progress,
|
||||||
|
};
|
||||||
|
|
@ -155,12 +155,11 @@ static struct of_device_id __initdata of_bus_ids[] = {
|
||||||
static int __init declare_of_platform_devices(void)
|
static int __init declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
/* Publish the QE devices */
|
/* Publish the QE devices */
|
||||||
if (machine_is(ep88xc))
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||||
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(declare_of_platform_devices);
|
machine_device_initcall(ep88xc, declare_of_platform_devices);
|
||||||
|
|
||||||
define_machine(ep88xc) {
|
define_machine(ep88xc) {
|
||||||
.name = "Embedded Planet EP88xC",
|
.name = "Embedded Planet EP88xC",
|
||||||
|
|
|
||||||
|
|
@ -128,12 +128,11 @@ static struct of_device_id __initdata of_bus_ids[] = {
|
||||||
|
|
||||||
static int __init declare_of_platform_devices(void)
|
static int __init declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
if (machine_is(mpc86x_ads))
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||||
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(declare_of_platform_devices);
|
machine_device_initcall(mpc86x_ads, declare_of_platform_devices);
|
||||||
|
|
||||||
define_machine(mpc86x_ads) {
|
define_machine(mpc86x_ads) {
|
||||||
.name = "MPC86x ADS",
|
.name = "MPC86x ADS",
|
||||||
|
|
|
||||||
|
|
@ -264,12 +264,11 @@ static struct of_device_id __initdata of_bus_ids[] = {
|
||||||
static int __init declare_of_platform_devices(void)
|
static int __init declare_of_platform_devices(void)
|
||||||
{
|
{
|
||||||
/* Publish the QE devices */
|
/* Publish the QE devices */
|
||||||
if (machine_is(mpc885_ads))
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||||
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
device_initcall(declare_of_platform_devices);
|
machine_device_initcall(mpc885_ads, declare_of_platform_devices);
|
||||||
|
|
||||||
define_machine(mpc885_ads) {
|
define_machine(mpc885_ads) {
|
||||||
.name = "Freescale MPC885 ADS",
|
.name = "Freescale MPC885 ADS",
|
||||||
|
|
|
||||||
|
|
@ -22,6 +22,7 @@ config PPC_83xx
|
||||||
depends on 6xx
|
depends on 6xx
|
||||||
select FSL_SOC
|
select FSL_SOC
|
||||||
select 83xx
|
select 83xx
|
||||||
|
select IPIC
|
||||||
select WANT_DEVICE_TREE
|
select WANT_DEVICE_TREE
|
||||||
|
|
||||||
config PPC_86xx
|
config PPC_86xx
|
||||||
|
|
@ -80,6 +81,10 @@ config XICS
|
||||||
bool
|
bool
|
||||||
default y
|
default y
|
||||||
|
|
||||||
|
config IPIC
|
||||||
|
bool
|
||||||
|
default n
|
||||||
|
|
||||||
config MPIC
|
config MPIC
|
||||||
bool
|
bool
|
||||||
default n
|
default n
|
||||||
|
|
@ -265,6 +270,7 @@ config TAU_AVERAGE
|
||||||
config QUICC_ENGINE
|
config QUICC_ENGINE
|
||||||
bool
|
bool
|
||||||
select PPC_LIB_RHEAP
|
select PPC_LIB_RHEAP
|
||||||
|
select CRC32
|
||||||
help
|
help
|
||||||
The QUICC Engine (QE) is a new generation of communications
|
The QUICC Engine (QE) is a new generation of communications
|
||||||
coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
|
coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
|
||||||
|
|
|
||||||
|
|
@ -9,6 +9,8 @@ config LINKSTATION
|
||||||
select FSL_SOC
|
select FSL_SOC
|
||||||
select PPC_UDBG_16550 if SERIAL_8250
|
select PPC_UDBG_16550 if SERIAL_8250
|
||||||
select DEFAULT_UIMAGE
|
select DEFAULT_UIMAGE
|
||||||
|
select MPC10X_OPENPIC
|
||||||
|
select MPC10X_BRIDGE
|
||||||
help
|
help
|
||||||
Select LINKSTATION if configuring for one of PPC- (MPC8241)
|
Select LINKSTATION if configuring for one of PPC- (MPC8241)
|
||||||
based NAS systems from Buffalo Technology. So far only
|
based NAS systems from Buffalo Technology. So far only
|
||||||
|
|
@ -16,6 +18,19 @@ config LINKSTATION
|
||||||
Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
|
Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
|
||||||
Terastation systems should be supported too.
|
Terastation systems should be supported too.
|
||||||
|
|
||||||
|
config STORCENTER
|
||||||
|
bool "IOMEGA StorCenter"
|
||||||
|
depends on EMBEDDED6xx
|
||||||
|
select MPIC
|
||||||
|
select FSL_SOC
|
||||||
|
select PPC_UDBG_16550 if SERIAL_8250
|
||||||
|
select WANT_DEVICE_TREE
|
||||||
|
select MPC10X_OPENPIC
|
||||||
|
select MPC10X_BRIDGE
|
||||||
|
help
|
||||||
|
Select STORCENTER if configuring for the iomega StorCenter
|
||||||
|
with an 8241 CPU in it.
|
||||||
|
|
||||||
config MPC7448HPC2
|
config MPC7448HPC2
|
||||||
bool "Freescale MPC7448HPC2(Taiga)"
|
bool "Freescale MPC7448HPC2(Taiga)"
|
||||||
depends on EMBEDDED6xx
|
depends on EMBEDDED6xx
|
||||||
|
|
@ -23,6 +38,7 @@ config MPC7448HPC2
|
||||||
select DEFAULT_UIMAGE
|
select DEFAULT_UIMAGE
|
||||||
select PPC_UDBG_16550
|
select PPC_UDBG_16550
|
||||||
select WANT_DEVICE_TREE
|
select WANT_DEVICE_TREE
|
||||||
|
select TSI108_BRIDGE
|
||||||
help
|
help
|
||||||
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
|
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
|
||||||
platform
|
platform
|
||||||
|
|
@ -33,6 +49,7 @@ config PPC_HOLLY
|
||||||
select TSI108_BRIDGE
|
select TSI108_BRIDGE
|
||||||
select PPC_UDBG_16550
|
select PPC_UDBG_16550
|
||||||
select WANT_DEVICE_TREE
|
select WANT_DEVICE_TREE
|
||||||
|
select TSI108_BRIDGE
|
||||||
help
|
help
|
||||||
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
|
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
|
||||||
Board with TSI108/9 bridge (Hickory/Holly)
|
Board with TSI108/9 bridge (Hickory/Holly)
|
||||||
|
|
@ -48,17 +65,13 @@ config PPC_PRPMC2800
|
||||||
|
|
||||||
config TSI108_BRIDGE
|
config TSI108_BRIDGE
|
||||||
bool
|
bool
|
||||||
depends on MPC7448HPC2 || PPC_HOLLY
|
|
||||||
select PCI
|
select PCI
|
||||||
select MPIC
|
select MPIC
|
||||||
select MPIC_WEIRD
|
select MPIC_WEIRD
|
||||||
default y
|
|
||||||
|
|
||||||
config MPC10X_BRIDGE
|
config MPC10X_BRIDGE
|
||||||
bool
|
bool
|
||||||
depends on LINKSTATION
|
|
||||||
select PPC_INDIRECT_PCI
|
select PPC_INDIRECT_PCI
|
||||||
default y
|
|
||||||
|
|
||||||
config MV64X60
|
config MV64X60
|
||||||
bool
|
bool
|
||||||
|
|
@ -67,8 +80,6 @@ config MV64X60
|
||||||
|
|
||||||
config MPC10X_OPENPIC
|
config MPC10X_OPENPIC
|
||||||
bool
|
bool
|
||||||
depends on LINKSTATION
|
|
||||||
default y
|
|
||||||
|
|
||||||
config MPC10X_STORE_GATHERING
|
config MPC10X_STORE_GATHERING
|
||||||
bool "Enable MPC10x store gathering"
|
bool "Enable MPC10x store gathering"
|
||||||
|
|
|
||||||
|
|
@ -3,5 +3,6 @@
|
||||||
#
|
#
|
||||||
obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
|
obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
|
||||||
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
|
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
|
||||||
|
obj-$(CONFIG_STORCENTER) += storcenter.o
|
||||||
obj-$(CONFIG_PPC_HOLLY) += holly.o
|
obj-$(CONFIG_PPC_HOLLY) += holly.o
|
||||||
obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o
|
obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o
|
||||||
|
|
|
||||||
|
|
@ -53,8 +53,6 @@
|
||||||
|
|
||||||
#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
|
#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
|
||||||
|
|
||||||
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
|
|
||||||
|
|
||||||
int mpc7448_hpc2_exclude_device(struct pci_controller *hose,
|
int mpc7448_hpc2_exclude_device(struct pci_controller *hose,
|
||||||
u_char bus, u_char devfn)
|
u_char bus, u_char devfn)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,192 @@
|
||||||
|
/*
|
||||||
|
* Board setup routines for the storcenter
|
||||||
|
*
|
||||||
|
* Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org)
|
||||||
|
* Copyright 2007 Andy Wilcox, Jon Loeliger
|
||||||
|
*
|
||||||
|
* Based on linkstation.c by G. Liakhovetski
|
||||||
|
*
|
||||||
|
* This file is licensed under the terms of the GNU General Public License
|
||||||
|
* version 2. This program is licensed "as is" without any warranty of
|
||||||
|
* any kind, whether express or implied.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/pci.h>
|
||||||
|
#include <linux/initrd.h>
|
||||||
|
#include <linux/mtd/physmap.h>
|
||||||
|
#include <linux/of_platform.h>
|
||||||
|
|
||||||
|
#include <asm/system.h>
|
||||||
|
#include <asm/time.h>
|
||||||
|
#include <asm/prom.h>
|
||||||
|
#include <asm/mpic.h>
|
||||||
|
#include <asm/pci-bridge.h>
|
||||||
|
|
||||||
|
#include "mpc10x.h"
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef CONFIG_MTD_PHYSMAP
|
||||||
|
static struct mtd_partition storcenter_physmap_partitions[] = {
|
||||||
|
{
|
||||||
|
.name = "kernel",
|
||||||
|
.offset = 0x000000,
|
||||||
|
.size = 0x170000,
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.name = "rootfs",
|
||||||
|
.offset = 0x170000,
|
||||||
|
.size = 0x590000,
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.name = "uboot",
|
||||||
|
.offset = 0x700000,
|
||||||
|
.size = 0x040000,
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.name = "config",
|
||||||
|
.offset = 0x740000,
|
||||||
|
.size = 0x0c0000,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
static __initdata struct of_device_id storcenter_of_bus[] = {
|
||||||
|
{ .name = "soc", },
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init storcenter_device_probe(void)
|
||||||
|
{
|
||||||
|
of_platform_bus_probe(NULL, storcenter_of_bus, NULL);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
machine_device_initcall(storcenter, storcenter_device_probe);
|
||||||
|
|
||||||
|
|
||||||
|
static int __init storcenter_add_bridge(struct device_node *dev)
|
||||||
|
{
|
||||||
|
#ifdef CONFIG_PCI
|
||||||
|
int len;
|
||||||
|
struct pci_controller *hose;
|
||||||
|
const int *bus_range;
|
||||||
|
|
||||||
|
printk("Adding PCI host bridge %s\n", dev->full_name);
|
||||||
|
|
||||||
|
hose = pcibios_alloc_controller(dev);
|
||||||
|
if (hose == NULL)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
bus_range = of_get_property(dev, "bus-range", &len);
|
||||||
|
hose->first_busno = bus_range ? bus_range[0] : 0;
|
||||||
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
||||||
|
|
||||||
|
setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0);
|
||||||
|
|
||||||
|
/* Interpret the "ranges" property */
|
||||||
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
||||||
|
pci_process_bridge_OF_ranges(hose, dev, 1);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void __init storcenter_setup_arch(void)
|
||||||
|
{
|
||||||
|
struct device_node *np;
|
||||||
|
|
||||||
|
#ifdef CONFIG_MTD_PHYSMAP
|
||||||
|
physmap_set_partitions(storcenter_physmap_partitions,
|
||||||
|
ARRAY_SIZE(storcenter_physmap_partitions));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Lookup PCI host bridges */
|
||||||
|
for_each_compatible_node(np, "pci", "mpc10x-pci")
|
||||||
|
storcenter_add_bridge(np);
|
||||||
|
|
||||||
|
printk(KERN_INFO "IOMEGA StorCenter\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Interrupt setup and service. Interrrupts on the turbostation come
|
||||||
|
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
|
||||||
|
*/
|
||||||
|
static void __init storcenter_init_IRQ(void)
|
||||||
|
{
|
||||||
|
struct mpic *mpic;
|
||||||
|
struct device_node *dnp;
|
||||||
|
const void *prop;
|
||||||
|
int size;
|
||||||
|
phys_addr_t paddr;
|
||||||
|
|
||||||
|
dnp = of_find_node_by_type(NULL, "open-pic");
|
||||||
|
if (dnp == NULL)
|
||||||
|
return;
|
||||||
|
|
||||||
|
prop = of_get_property(dnp, "reg", &size);
|
||||||
|
if (prop == NULL) {
|
||||||
|
of_node_put(dnp);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
paddr = (phys_addr_t)of_translate_address(dnp, prop);
|
||||||
|
mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
|
||||||
|
4, 32, " EPIC ");
|
||||||
|
|
||||||
|
of_node_put(dnp);
|
||||||
|
|
||||||
|
BUG_ON(mpic == NULL);
|
||||||
|
|
||||||
|
/* PCI IRQs */
|
||||||
|
/*
|
||||||
|
* 2.6.12 patch:
|
||||||
|
* openpic_set_sources(0, 5, OpenPIC_Addr + 0x10200);
|
||||||
|
* openpic_set_sources(5, 2, OpenPIC_Addr + 0x11120);
|
||||||
|
* first_irq, num_irqs, __iomem first_ISR
|
||||||
|
* o_ss: i, src: 0, fdf50200
|
||||||
|
* o_ss: i, src: 1, fdf50220
|
||||||
|
* o_ss: i, src: 2, fdf50240
|
||||||
|
* o_ss: i, src: 3, fdf50260
|
||||||
|
* o_ss: i, src: 4, fdf50280
|
||||||
|
* o_ss: i, src: 5, fdf51120
|
||||||
|
* o_ss: i, src: 6, fdf51140
|
||||||
|
*/
|
||||||
|
mpic_assign_isu(mpic, 0, paddr + 0x10200);
|
||||||
|
mpic_assign_isu(mpic, 1, paddr + 0x10220);
|
||||||
|
mpic_assign_isu(mpic, 2, paddr + 0x10240);
|
||||||
|
mpic_assign_isu(mpic, 3, paddr + 0x10260);
|
||||||
|
mpic_assign_isu(mpic, 4, paddr + 0x10280);
|
||||||
|
mpic_assign_isu(mpic, 5, paddr + 0x11120);
|
||||||
|
mpic_assign_isu(mpic, 6, paddr + 0x11140);
|
||||||
|
|
||||||
|
mpic_init(mpic);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void storcenter_restart(char *cmd)
|
||||||
|
{
|
||||||
|
local_irq_disable();
|
||||||
|
|
||||||
|
/* Set exception prefix high - to the firmware */
|
||||||
|
_nmask_and_or_msr(0, MSR_IP);
|
||||||
|
|
||||||
|
/* Wait for reset to happen */
|
||||||
|
for (;;) ;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int __init storcenter_probe(void)
|
||||||
|
{
|
||||||
|
unsigned long root = of_get_flat_dt_root();
|
||||||
|
|
||||||
|
return of_flat_dt_is_compatible(root, "storcenter");
|
||||||
|
}
|
||||||
|
|
||||||
|
define_machine(storcenter){
|
||||||
|
.name = "IOMEGA StorCenter",
|
||||||
|
.probe = storcenter_probe,
|
||||||
|
.setup_arch = storcenter_setup_arch,
|
||||||
|
.init_IRQ = storcenter_init_IRQ,
|
||||||
|
.get_irq = mpic_get_irq,
|
||||||
|
.restart = storcenter_restart,
|
||||||
|
.calibrate_decr = generic_calibrate_decr,
|
||||||
|
};
|
||||||
|
|
@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
|
||||||
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
|
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
|
||||||
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
|
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
|
||||||
obj-$(CONFIG_FSL_PCI) += fsl_pci.o
|
obj-$(CONFIG_FSL_PCI) += fsl_pci.o
|
||||||
|
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
|
||||||
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
|
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
|
||||||
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
|
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
|
||||||
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
|
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
|
||||||
|
|
@ -24,7 +25,7 @@ obj-$(CONFIG_AXON_RAM) += axonram.o
|
||||||
ifeq ($(CONFIG_PPC_MERGE),y)
|
ifeq ($(CONFIG_PPC_MERGE),y)
|
||||||
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
|
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
|
||||||
obj-$(CONFIG_PPC_I8259) += i8259.o
|
obj-$(CONFIG_PPC_I8259) += i8259.o
|
||||||
obj-$(CONFIG_PPC_83xx) += ipic.o
|
obj-$(CONFIG_IPIC) += ipic.o
|
||||||
obj-$(CONFIG_4xx) += uic.o
|
obj-$(CONFIG_4xx) += uic.o
|
||||||
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
|
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
|
||||||
ifeq ($(CONFIG_PCI),y)
|
ifeq ($(CONFIG_PCI),y)
|
||||||
|
|
|
||||||
|
|
@ -33,8 +33,8 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
|
||||||
struct ccsr_pci __iomem *pci;
|
struct ccsr_pci __iomem *pci;
|
||||||
int i;
|
int i;
|
||||||
|
|
||||||
pr_debug("PCI memory map start 0x%x, size 0x%x\n", rsrc->start,
|
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
|
||||||
rsrc->end - rsrc->start + 1);
|
(u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
|
||||||
pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
|
pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
|
||||||
|
|
||||||
/* Disable all windows (except powar0 since its ignored) */
|
/* Disable all windows (except powar0 since its ignored) */
|
||||||
|
|
@ -46,17 +46,17 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
|
||||||
/* Setup outbound MEM window */
|
/* Setup outbound MEM window */
|
||||||
for(i = 0; i < 3; i++)
|
for(i = 0; i < 3; i++)
|
||||||
if (hose->mem_resources[i].flags & IORESOURCE_MEM){
|
if (hose->mem_resources[i].flags & IORESOURCE_MEM){
|
||||||
pr_debug("PCI MEM resource start 0x%08x, size 0x%08x.\n",
|
resource_size_t pci_addr_start =
|
||||||
hose->mem_resources[i].start,
|
hose->mem_resources[i].start -
|
||||||
hose->mem_resources[i].end
|
hose->pci_mem_offset;
|
||||||
- hose->mem_resources[i].start + 1);
|
pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
|
||||||
out_be32(&pci->pow[i+1].potar,
|
(u64)hose->mem_resources[i].start,
|
||||||
(hose->mem_resources[i].start >> 12)
|
(u64)hose->mem_resources[i].end
|
||||||
& 0x000fffff);
|
- (u64)hose->mem_resources[i].start + 1);
|
||||||
|
out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
|
||||||
out_be32(&pci->pow[i+1].potear, 0);
|
out_be32(&pci->pow[i+1].potear, 0);
|
||||||
out_be32(&pci->pow[i+1].powbar,
|
out_be32(&pci->pow[i+1].powbar,
|
||||||
(hose->mem_resources[i].start >> 12)
|
(hose->mem_resources[i].start >> 12));
|
||||||
& 0x000fffff);
|
|
||||||
/* Enable, Mem R/W */
|
/* Enable, Mem R/W */
|
||||||
out_be32(&pci->pow[i+1].powar, 0x80044000
|
out_be32(&pci->pow[i+1].powar, 0x80044000
|
||||||
| (__ilog2(hose->mem_resources[i].end
|
| (__ilog2(hose->mem_resources[i].end
|
||||||
|
|
@ -65,15 +65,14 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
|
||||||
|
|
||||||
/* Setup outbound IO window */
|
/* Setup outbound IO window */
|
||||||
if (hose->io_resource.flags & IORESOURCE_IO){
|
if (hose->io_resource.flags & IORESOURCE_IO){
|
||||||
pr_debug("PCI IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
|
pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
|
||||||
hose->io_resource.start,
|
"phy base 0x%016llx.\n",
|
||||||
hose->io_resource.end - hose->io_resource.start + 1,
|
(u64)hose->io_resource.start,
|
||||||
hose->io_base_phys);
|
(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
|
||||||
out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12)
|
(u64)hose->io_base_phys);
|
||||||
& 0x000fffff);
|
out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
|
||||||
out_be32(&pci->pow[i+1].potear, 0);
|
out_be32(&pci->pow[i+1].potear, 0);
|
||||||
out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12)
|
out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
|
||||||
& 0x000fffff);
|
|
||||||
/* Enable, IO R/W */
|
/* Enable, IO R/W */
|
||||||
out_be32(&pci->pow[i+1].powar, 0x80088000
|
out_be32(&pci->pow[i+1].powar, 0x80088000
|
||||||
| (__ilog2(hose->io_resource.end
|
| (__ilog2(hose->io_resource.end
|
||||||
|
|
@ -107,55 +106,17 @@ void __init setup_pci_cmd(struct pci_controller *hose)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
static void __init quirk_fsl_pcie_transparent(struct pci_dev *dev)
|
static int fsl_pcie_bus_fixup;
|
||||||
{
|
|
||||||
struct resource *res;
|
|
||||||
int i, res_idx = PCI_BRIDGE_RESOURCES;
|
|
||||||
struct pci_controller *hose;
|
|
||||||
|
|
||||||
|
static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
|
||||||
|
{
|
||||||
/* if we aren't a PCIe don't bother */
|
/* if we aren't a PCIe don't bother */
|
||||||
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
|
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
|
||||||
return ;
|
return ;
|
||||||
|
|
||||||
/*
|
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
||||||
* Make the bridge be transparent.
|
fsl_pcie_bus_fixup = 1;
|
||||||
*/
|
return ;
|
||||||
dev->transparent = 1;
|
|
||||||
|
|
||||||
hose = pci_bus_to_host(dev->bus);
|
|
||||||
if (!hose) {
|
|
||||||
printk(KERN_ERR "Can't find hose for bus %d\n",
|
|
||||||
dev->bus->number);
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Clear out any of the virtual P2P bridge registers */
|
|
||||||
pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0);
|
|
||||||
pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, 0);
|
|
||||||
pci_write_config_byte(dev, PCI_IO_BASE, 0x10);
|
|
||||||
pci_write_config_byte(dev, PCI_IO_LIMIT, 0);
|
|
||||||
pci_write_config_word(dev, PCI_MEMORY_BASE, 0x10);
|
|
||||||
pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
|
|
||||||
pci_write_config_word(dev, PCI_PREF_BASE_UPPER32, 0x0);
|
|
||||||
pci_write_config_word(dev, PCI_PREF_LIMIT_UPPER32, 0x0);
|
|
||||||
pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
|
|
||||||
pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
|
|
||||||
|
|
||||||
if (hose->io_resource.flags) {
|
|
||||||
res = &dev->resource[res_idx++];
|
|
||||||
res->start = hose->io_resource.start;
|
|
||||||
res->end = hose->io_resource.end;
|
|
||||||
res->flags = hose->io_resource.flags;
|
|
||||||
update_bridge_resource(dev, res);
|
|
||||||
}
|
|
||||||
|
|
||||||
for (i = 0; i < 3; i++) {
|
|
||||||
res = &dev->resource[res_idx + i];
|
|
||||||
res->start = hose->mem_resources[i].start;
|
|
||||||
res->end = hose->mem_resources[i].end;
|
|
||||||
res->flags = hose->mem_resources[i].flags;
|
|
||||||
update_bridge_resource(dev, res);
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
|
||||||
int __init fsl_pcie_check_link(struct pci_controller *hose)
|
int __init fsl_pcie_check_link(struct pci_controller *hose)
|
||||||
|
|
@ -172,11 +133,24 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus)
|
||||||
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
|
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
|
||||||
int i;
|
int i;
|
||||||
|
|
||||||
/* deal with bogus pci_bus when we don't have anything connected on PCIe */
|
if ((bus->parent == hose->bus) &&
|
||||||
if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
|
((fsl_pcie_bus_fixup &&
|
||||||
if (bus->parent) {
|
early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
|
||||||
for (i = 0; i < 4; ++i)
|
(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
|
||||||
bus->resource[i] = bus->parent->resource[i];
|
{
|
||||||
|
for (i = 0; i < 4; ++i) {
|
||||||
|
struct resource *res = bus->resource[i];
|
||||||
|
struct resource *par = bus->parent->resource[i];
|
||||||
|
if (res) {
|
||||||
|
res->start = 0;
|
||||||
|
res->end = 0;
|
||||||
|
res->flags = 0;
|
||||||
|
}
|
||||||
|
if (res && par) {
|
||||||
|
res->start = par->start;
|
||||||
|
res->end = par->end;
|
||||||
|
res->flags = par->flags;
|
||||||
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
@ -240,23 +214,23 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
|
||||||
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_transparent);
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
|
||||||
|
|
|
||||||
|
|
@ -24,6 +24,7 @@
|
||||||
#include <linux/platform_device.h>
|
#include <linux/platform_device.h>
|
||||||
#include <linux/of_platform.h>
|
#include <linux/of_platform.h>
|
||||||
#include <linux/phy.h>
|
#include <linux/phy.h>
|
||||||
|
#include <linux/phy_fixed.h>
|
||||||
#include <linux/spi/spi.h>
|
#include <linux/spi/spi.h>
|
||||||
#include <linux/fsl_devices.h>
|
#include <linux/fsl_devices.h>
|
||||||
#include <linux/fs_enet_pd.h>
|
#include <linux/fs_enet_pd.h>
|
||||||
|
|
@ -54,10 +55,18 @@ phys_addr_t get_immrbase(void)
|
||||||
soc = of_find_node_by_type(NULL, "soc");
|
soc = of_find_node_by_type(NULL, "soc");
|
||||||
if (soc) {
|
if (soc) {
|
||||||
int size;
|
int size;
|
||||||
const void *prop = of_get_property(soc, "reg", &size);
|
u32 naddr;
|
||||||
|
const u32 *prop = of_get_property(soc, "#address-cells", &size);
|
||||||
|
|
||||||
|
if (prop && size == 4)
|
||||||
|
naddr = *prop;
|
||||||
|
else
|
||||||
|
naddr = 2;
|
||||||
|
|
||||||
|
prop = of_get_property(soc, "ranges", &size);
|
||||||
if (prop)
|
if (prop)
|
||||||
immrbase = of_translate_address(soc, prop);
|
immrbase = of_translate_address(soc, prop + naddr);
|
||||||
|
|
||||||
of_node_put(soc);
|
of_node_put(soc);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -130,6 +139,37 @@ u32 get_baudrate(void)
|
||||||
EXPORT_SYMBOL(get_baudrate);
|
EXPORT_SYMBOL(get_baudrate);
|
||||||
#endif /* CONFIG_CPM2 */
|
#endif /* CONFIG_CPM2 */
|
||||||
|
|
||||||
|
#ifdef CONFIG_FIXED_PHY
|
||||||
|
static int __init of_add_fixed_phys(void)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
struct device_node *np;
|
||||||
|
u32 *fixed_link;
|
||||||
|
struct fixed_phy_status status = {};
|
||||||
|
|
||||||
|
for_each_node_by_name(np, "ethernet") {
|
||||||
|
fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
|
||||||
|
if (!fixed_link)
|
||||||
|
continue;
|
||||||
|
|
||||||
|
status.link = 1;
|
||||||
|
status.duplex = fixed_link[1];
|
||||||
|
status.speed = fixed_link[2];
|
||||||
|
status.pause = fixed_link[3];
|
||||||
|
status.asym_pause = fixed_link[4];
|
||||||
|
|
||||||
|
ret = fixed_phy_add(PHY_POLL, fixed_link[0], &status);
|
||||||
|
if (ret) {
|
||||||
|
of_node_put(np);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
arch_initcall(of_add_fixed_phys);
|
||||||
|
#endif /* CONFIG_FIXED_PHY */
|
||||||
|
|
||||||
static int __init gfar_mdio_of_init(void)
|
static int __init gfar_mdio_of_init(void)
|
||||||
{
|
{
|
||||||
struct device_node *np = NULL;
|
struct device_node *np = NULL;
|
||||||
|
|
@ -198,7 +238,6 @@ static const char *gfar_tx_intr = "tx";
|
||||||
static const char *gfar_rx_intr = "rx";
|
static const char *gfar_rx_intr = "rx";
|
||||||
static const char *gfar_err_intr = "error";
|
static const char *gfar_err_intr = "error";
|
||||||
|
|
||||||
|
|
||||||
static int __init gfar_of_init(void)
|
static int __init gfar_of_init(void)
|
||||||
{
|
{
|
||||||
struct device_node *np;
|
struct device_node *np;
|
||||||
|
|
@ -282,29 +321,43 @@ static int __init gfar_of_init(void)
|
||||||
gfar_data.interface = PHY_INTERFACE_MODE_MII;
|
gfar_data.interface = PHY_INTERFACE_MODE_MII;
|
||||||
|
|
||||||
ph = of_get_property(np, "phy-handle", NULL);
|
ph = of_get_property(np, "phy-handle", NULL);
|
||||||
phy = of_find_node_by_phandle(*ph);
|
if (ph == NULL) {
|
||||||
|
u32 *fixed_link;
|
||||||
|
|
||||||
if (phy == NULL) {
|
fixed_link = (u32 *)of_get_property(np, "fixed-link",
|
||||||
ret = -ENODEV;
|
NULL);
|
||||||
goto unreg;
|
if (!fixed_link) {
|
||||||
}
|
ret = -ENODEV;
|
||||||
|
goto unreg;
|
||||||
|
}
|
||||||
|
|
||||||
mdio = of_get_parent(phy);
|
gfar_data.bus_id = 0;
|
||||||
|
gfar_data.phy_id = fixed_link[0];
|
||||||
|
} else {
|
||||||
|
phy = of_find_node_by_phandle(*ph);
|
||||||
|
|
||||||
|
if (phy == NULL) {
|
||||||
|
ret = -ENODEV;
|
||||||
|
goto unreg;
|
||||||
|
}
|
||||||
|
|
||||||
|
mdio = of_get_parent(phy);
|
||||||
|
|
||||||
|
id = of_get_property(phy, "reg", NULL);
|
||||||
|
ret = of_address_to_resource(mdio, 0, &res);
|
||||||
|
if (ret) {
|
||||||
|
of_node_put(phy);
|
||||||
|
of_node_put(mdio);
|
||||||
|
goto unreg;
|
||||||
|
}
|
||||||
|
|
||||||
|
gfar_data.phy_id = *id;
|
||||||
|
gfar_data.bus_id = res.start;
|
||||||
|
|
||||||
id = of_get_property(phy, "reg", NULL);
|
|
||||||
ret = of_address_to_resource(mdio, 0, &res);
|
|
||||||
if (ret) {
|
|
||||||
of_node_put(phy);
|
of_node_put(phy);
|
||||||
of_node_put(mdio);
|
of_node_put(mdio);
|
||||||
goto unreg;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
gfar_data.phy_id = *id;
|
|
||||||
gfar_data.bus_id = res.start;
|
|
||||||
|
|
||||||
of_node_put(phy);
|
|
||||||
of_node_put(mdio);
|
|
||||||
|
|
||||||
ret =
|
ret =
|
||||||
platform_device_add_data(gfar_dev, &gfar_data,
|
platform_device_add_data(gfar_dev, &gfar_data,
|
||||||
sizeof(struct
|
sizeof(struct
|
||||||
|
|
@ -531,14 +584,12 @@ static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
|
||||||
static int __init fsl_usb_of_init(void)
|
static int __init fsl_usb_of_init(void)
|
||||||
{
|
{
|
||||||
struct device_node *np;
|
struct device_node *np;
|
||||||
unsigned int i;
|
unsigned int i = 0;
|
||||||
struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
|
struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
|
||||||
*usb_dev_dr_client = NULL;
|
*usb_dev_dr_client = NULL;
|
||||||
int ret;
|
int ret;
|
||||||
|
|
||||||
for (np = NULL, i = 0;
|
for_each_compatible_node(np, NULL, "fsl-usb2-mph") {
|
||||||
(np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL;
|
|
||||||
i++) {
|
|
||||||
struct resource r[2];
|
struct resource r[2];
|
||||||
struct fsl_usb2_platform_data usb_data;
|
struct fsl_usb2_platform_data usb_data;
|
||||||
const unsigned char *prop = NULL;
|
const unsigned char *prop = NULL;
|
||||||
|
|
@ -581,11 +632,10 @@ static int __init fsl_usb_of_init(void)
|
||||||
fsl_usb2_platform_data));
|
fsl_usb2_platform_data));
|
||||||
if (ret)
|
if (ret)
|
||||||
goto unreg_mph;
|
goto unreg_mph;
|
||||||
|
i++;
|
||||||
}
|
}
|
||||||
|
|
||||||
for (np = NULL;
|
for_each_compatible_node(np, NULL, "fsl-usb2-dr") {
|
||||||
(np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL;
|
|
||||||
i++) {
|
|
||||||
struct resource r[2];
|
struct resource r[2];
|
||||||
struct fsl_usb2_platform_data usb_data;
|
struct fsl_usb2_platform_data usb_data;
|
||||||
const unsigned char *prop = NULL;
|
const unsigned char *prop = NULL;
|
||||||
|
|
@ -657,6 +707,7 @@ static int __init fsl_usb_of_init(void)
|
||||||
fsl_usb2_platform_data))))
|
fsl_usb2_platform_data))))
|
||||||
goto unreg_dr;
|
goto unreg_dr;
|
||||||
}
|
}
|
||||||
|
i++;
|
||||||
}
|
}
|
||||||
return 0;
|
return 0;
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -48,6 +48,13 @@ static struct ipic_info ipic_info[] = {
|
||||||
.bit = 17,
|
.bit = 17,
|
||||||
.prio_mask = 1,
|
.prio_mask = 1,
|
||||||
},
|
},
|
||||||
|
[3] = {
|
||||||
|
.mask = IPIC_SIMSR_H,
|
||||||
|
.prio = IPIC_SIPRR_C,
|
||||||
|
.force = IPIC_SIFCR_H,
|
||||||
|
.bit = 18,
|
||||||
|
.prio_mask = 2,
|
||||||
|
},
|
||||||
[4] = {
|
[4] = {
|
||||||
.mask = IPIC_SIMSR_H,
|
.mask = IPIC_SIMSR_H,
|
||||||
.prio = IPIC_SIPRR_C,
|
.prio = IPIC_SIPRR_C,
|
||||||
|
|
@ -55,6 +62,34 @@ static struct ipic_info ipic_info[] = {
|
||||||
.bit = 19,
|
.bit = 19,
|
||||||
.prio_mask = 3,
|
.prio_mask = 3,
|
||||||
},
|
},
|
||||||
|
[5] = {
|
||||||
|
.mask = IPIC_SIMSR_H,
|
||||||
|
.prio = IPIC_SIPRR_C,
|
||||||
|
.force = IPIC_SIFCR_H,
|
||||||
|
.bit = 20,
|
||||||
|
.prio_mask = 4,
|
||||||
|
},
|
||||||
|
[6] = {
|
||||||
|
.mask = IPIC_SIMSR_H,
|
||||||
|
.prio = IPIC_SIPRR_C,
|
||||||
|
.force = IPIC_SIFCR_H,
|
||||||
|
.bit = 21,
|
||||||
|
.prio_mask = 5,
|
||||||
|
},
|
||||||
|
[7] = {
|
||||||
|
.mask = IPIC_SIMSR_H,
|
||||||
|
.prio = IPIC_SIPRR_C,
|
||||||
|
.force = IPIC_SIFCR_H,
|
||||||
|
.bit = 22,
|
||||||
|
.prio_mask = 6,
|
||||||
|
},
|
||||||
|
[8] = {
|
||||||
|
.mask = IPIC_SIMSR_H,
|
||||||
|
.prio = IPIC_SIPRR_C,
|
||||||
|
.force = IPIC_SIFCR_H,
|
||||||
|
.bit = 23,
|
||||||
|
.prio_mask = 7,
|
||||||
|
},
|
||||||
[9] = {
|
[9] = {
|
||||||
.mask = IPIC_SIMSR_H,
|
.mask = IPIC_SIMSR_H,
|
||||||
.prio = IPIC_SIPRR_D,
|
.prio = IPIC_SIPRR_D,
|
||||||
|
|
@ -223,6 +258,20 @@ static struct ipic_info ipic_info[] = {
|
||||||
.bit = 7,
|
.bit = 7,
|
||||||
.prio_mask = 7,
|
.prio_mask = 7,
|
||||||
},
|
},
|
||||||
|
[40] = {
|
||||||
|
.mask = IPIC_SIMSR_H,
|
||||||
|
.prio = IPIC_SIPRR_B,
|
||||||
|
.force = IPIC_SIFCR_H,
|
||||||
|
.bit = 8,
|
||||||
|
.prio_mask = 0,
|
||||||
|
},
|
||||||
|
[41] = {
|
||||||
|
.mask = IPIC_SIMSR_H,
|
||||||
|
.prio = IPIC_SIPRR_B,
|
||||||
|
.force = IPIC_SIFCR_H,
|
||||||
|
.bit = 9,
|
||||||
|
.prio_mask = 1,
|
||||||
|
},
|
||||||
[42] = {
|
[42] = {
|
||||||
.mask = IPIC_SIMSR_H,
|
.mask = IPIC_SIMSR_H,
|
||||||
.prio = IPIC_SIPRR_B,
|
.prio = IPIC_SIPRR_B,
|
||||||
|
|
@ -230,6 +279,13 @@ static struct ipic_info ipic_info[] = {
|
||||||
.bit = 10,
|
.bit = 10,
|
||||||
.prio_mask = 2,
|
.prio_mask = 2,
|
||||||
},
|
},
|
||||||
|
[43] = {
|
||||||
|
.mask = IPIC_SIMSR_H,
|
||||||
|
.prio = IPIC_SIPRR_B,
|
||||||
|
.force = IPIC_SIFCR_H,
|
||||||
|
.bit = 11,
|
||||||
|
.prio_mask = 3,
|
||||||
|
},
|
||||||
[44] = {
|
[44] = {
|
||||||
.mask = IPIC_SIMSR_H,
|
.mask = IPIC_SIMSR_H,
|
||||||
.prio = IPIC_SIPRR_B,
|
.prio = IPIC_SIPRR_B,
|
||||||
|
|
@ -387,6 +443,12 @@ static struct ipic_info ipic_info[] = {
|
||||||
.force = IPIC_SIFCR_L,
|
.force = IPIC_SIFCR_L,
|
||||||
.bit = 18,
|
.bit = 18,
|
||||||
},
|
},
|
||||||
|
[83] = {
|
||||||
|
.mask = IPIC_SIMSR_L,
|
||||||
|
.prio = 0,
|
||||||
|
.force = IPIC_SIFCR_L,
|
||||||
|
.bit = 19,
|
||||||
|
},
|
||||||
[84] = {
|
[84] = {
|
||||||
.mask = IPIC_SIMSR_L,
|
.mask = IPIC_SIMSR_L,
|
||||||
.prio = 0,
|
.prio = 0,
|
||||||
|
|
|
||||||
|
|
@ -267,7 +267,7 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
|
||||||
static void _mpic_map_mmio(struct mpic *mpic, unsigned long phys_addr,
|
static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
|
||||||
struct mpic_reg_bank *rb, unsigned int offset,
|
struct mpic_reg_bank *rb, unsigned int offset,
|
||||||
unsigned int size)
|
unsigned int size)
|
||||||
{
|
{
|
||||||
|
|
@ -287,7 +287,7 @@ static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
|
||||||
BUG_ON(!DCR_MAP_OK(rb->dhost));
|
BUG_ON(!DCR_MAP_OK(rb->dhost));
|
||||||
}
|
}
|
||||||
|
|
||||||
static inline void mpic_map(struct mpic *mpic, unsigned long phys_addr,
|
static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
|
||||||
struct mpic_reg_bank *rb, unsigned int offset,
|
struct mpic_reg_bank *rb, unsigned int offset,
|
||||||
unsigned int size)
|
unsigned int size)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -4,7 +4,7 @@
|
||||||
|
|
||||||
config UCC_SLOW
|
config UCC_SLOW
|
||||||
bool
|
bool
|
||||||
default n
|
default y if SERIAL_QE
|
||||||
help
|
help
|
||||||
This option provides qe_lib support to UCC slow
|
This option provides qe_lib support to UCC slow
|
||||||
protocols: UART, BISYNC, QMC
|
protocols: UART, BISYNC, QMC
|
||||||
|
|
|
||||||
|
|
@ -25,6 +25,7 @@
|
||||||
#include <linux/module.h>
|
#include <linux/module.h>
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
#include <linux/ioport.h>
|
#include <linux/ioport.h>
|
||||||
|
#include <linux/crc32.h>
|
||||||
#include <asm/irq.h>
|
#include <asm/irq.h>
|
||||||
#include <asm/page.h>
|
#include <asm/page.h>
|
||||||
#include <asm/pgtable.h>
|
#include <asm/pgtable.h>
|
||||||
|
|
@ -394,3 +395,249 @@ void *qe_muram_addr(unsigned long offset)
|
||||||
return (void *)&qe_immr->muram[offset];
|
return (void *)&qe_immr->muram[offset];
|
||||||
}
|
}
|
||||||
EXPORT_SYMBOL(qe_muram_addr);
|
EXPORT_SYMBOL(qe_muram_addr);
|
||||||
|
|
||||||
|
/* The maximum number of RISCs we support */
|
||||||
|
#define MAX_QE_RISC 2
|
||||||
|
|
||||||
|
/* Firmware information stored here for qe_get_firmware_info() */
|
||||||
|
static struct qe_firmware_info qe_firmware_info;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Set to 1 if QE firmware has been uploaded, and therefore
|
||||||
|
* qe_firmware_info contains valid data.
|
||||||
|
*/
|
||||||
|
static int qe_firmware_uploaded;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Upload a QE microcode
|
||||||
|
*
|
||||||
|
* This function is a worker function for qe_upload_firmware(). It does
|
||||||
|
* the actual uploading of the microcode.
|
||||||
|
*/
|
||||||
|
static void qe_upload_microcode(const void *base,
|
||||||
|
const struct qe_microcode *ucode)
|
||||||
|
{
|
||||||
|
const __be32 *code = base + be32_to_cpu(ucode->code_offset);
|
||||||
|
unsigned int i;
|
||||||
|
|
||||||
|
if (ucode->major || ucode->minor || ucode->revision)
|
||||||
|
printk(KERN_INFO "qe-firmware: "
|
||||||
|
"uploading microcode '%s' version %u.%u.%u\n",
|
||||||
|
ucode->id, ucode->major, ucode->minor, ucode->revision);
|
||||||
|
else
|
||||||
|
printk(KERN_INFO "qe-firmware: "
|
||||||
|
"uploading microcode '%s'\n", ucode->id);
|
||||||
|
|
||||||
|
/* Use auto-increment */
|
||||||
|
out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
|
||||||
|
QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
|
||||||
|
|
||||||
|
for (i = 0; i < be32_to_cpu(ucode->count); i++)
|
||||||
|
out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Upload a microcode to the I-RAM at a specific address.
|
||||||
|
*
|
||||||
|
* See Documentation/powerpc/qe-firmware.txt for information on QE microcode
|
||||||
|
* uploading.
|
||||||
|
*
|
||||||
|
* Currently, only version 1 is supported, so the 'version' field must be
|
||||||
|
* set to 1.
|
||||||
|
*
|
||||||
|
* The SOC model and revision are not validated, they are only displayed for
|
||||||
|
* informational purposes.
|
||||||
|
*
|
||||||
|
* 'calc_size' is the calculated size, in bytes, of the firmware structure and
|
||||||
|
* all of the microcode structures, minus the CRC.
|
||||||
|
*
|
||||||
|
* 'length' is the size that the structure says it is, including the CRC.
|
||||||
|
*/
|
||||||
|
int qe_upload_firmware(const struct qe_firmware *firmware)
|
||||||
|
{
|
||||||
|
unsigned int i;
|
||||||
|
unsigned int j;
|
||||||
|
u32 crc;
|
||||||
|
size_t calc_size = sizeof(struct qe_firmware);
|
||||||
|
size_t length;
|
||||||
|
const struct qe_header *hdr;
|
||||||
|
|
||||||
|
if (!firmware) {
|
||||||
|
printk(KERN_ERR "qe-firmware: invalid pointer\n");
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
hdr = &firmware->header;
|
||||||
|
length = be32_to_cpu(hdr->length);
|
||||||
|
|
||||||
|
/* Check the magic */
|
||||||
|
if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
|
||||||
|
(hdr->magic[2] != 'F')) {
|
||||||
|
printk(KERN_ERR "qe-firmware: not a microcode\n");
|
||||||
|
return -EPERM;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Check the version */
|
||||||
|
if (hdr->version != 1) {
|
||||||
|
printk(KERN_ERR "qe-firmware: unsupported version\n");
|
||||||
|
return -EPERM;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Validate some of the fields */
|
||||||
|
if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) {
|
||||||
|
printk(KERN_ERR "qe-firmware: invalid data\n");
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Validate the length and check if there's a CRC */
|
||||||
|
calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
|
||||||
|
|
||||||
|
for (i = 0; i < firmware->count; i++)
|
||||||
|
/*
|
||||||
|
* For situations where the second RISC uses the same microcode
|
||||||
|
* as the first, the 'code_offset' and 'count' fields will be
|
||||||
|
* zero, so it's okay to add those.
|
||||||
|
*/
|
||||||
|
calc_size += sizeof(__be32) *
|
||||||
|
be32_to_cpu(firmware->microcode[i].count);
|
||||||
|
|
||||||
|
/* Validate the length */
|
||||||
|
if (length != calc_size + sizeof(__be32)) {
|
||||||
|
printk(KERN_ERR "qe-firmware: invalid length\n");
|
||||||
|
return -EPERM;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Validate the CRC */
|
||||||
|
crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
|
||||||
|
if (crc != crc32(0, firmware, calc_size)) {
|
||||||
|
printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
|
||||||
|
return -EIO;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* If the microcode calls for it, split the I-RAM.
|
||||||
|
*/
|
||||||
|
if (!firmware->split)
|
||||||
|
setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
|
||||||
|
|
||||||
|
if (firmware->soc.model)
|
||||||
|
printk(KERN_INFO
|
||||||
|
"qe-firmware: firmware '%s' for %u V%u.%u\n",
|
||||||
|
firmware->id, be16_to_cpu(firmware->soc.model),
|
||||||
|
firmware->soc.major, firmware->soc.minor);
|
||||||
|
else
|
||||||
|
printk(KERN_INFO "qe-firmware: firmware '%s'\n",
|
||||||
|
firmware->id);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The QE only supports one microcode per RISC, so clear out all the
|
||||||
|
* saved microcode information and put in the new.
|
||||||
|
*/
|
||||||
|
memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
|
||||||
|
strcpy(qe_firmware_info.id, firmware->id);
|
||||||
|
qe_firmware_info.extended_modes = firmware->extended_modes;
|
||||||
|
memcpy(qe_firmware_info.vtraps, firmware->vtraps,
|
||||||
|
sizeof(firmware->vtraps));
|
||||||
|
|
||||||
|
/* Loop through each microcode. */
|
||||||
|
for (i = 0; i < firmware->count; i++) {
|
||||||
|
const struct qe_microcode *ucode = &firmware->microcode[i];
|
||||||
|
|
||||||
|
/* Upload a microcode if it's present */
|
||||||
|
if (ucode->code_offset)
|
||||||
|
qe_upload_microcode(firmware, ucode);
|
||||||
|
|
||||||
|
/* Program the traps for this processor */
|
||||||
|
for (j = 0; j < 16; j++) {
|
||||||
|
u32 trap = be32_to_cpu(ucode->traps[j]);
|
||||||
|
|
||||||
|
if (trap)
|
||||||
|
out_be32(&qe_immr->rsp[i].tibcr[j], trap);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Enable traps */
|
||||||
|
out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
|
||||||
|
}
|
||||||
|
|
||||||
|
qe_firmware_uploaded = 1;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(qe_upload_firmware);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Get info on the currently-loaded firmware
|
||||||
|
*
|
||||||
|
* This function also checks the device tree to see if the boot loader has
|
||||||
|
* uploaded a firmware already.
|
||||||
|
*/
|
||||||
|
struct qe_firmware_info *qe_get_firmware_info(void)
|
||||||
|
{
|
||||||
|
static int initialized;
|
||||||
|
struct property *prop;
|
||||||
|
struct device_node *qe;
|
||||||
|
struct device_node *fw = NULL;
|
||||||
|
const char *sprop;
|
||||||
|
unsigned int i;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* If we haven't checked yet, and a driver hasn't uploaded a firmware
|
||||||
|
* yet, then check the device tree for information.
|
||||||
|
*/
|
||||||
|
if (initialized || qe_firmware_uploaded)
|
||||||
|
return NULL;
|
||||||
|
|
||||||
|
initialized = 1;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Newer device trees have an "fsl,qe" compatible property for the QE
|
||||||
|
* node, but we still need to support older device trees.
|
||||||
|
*/
|
||||||
|
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
|
||||||
|
if (!qe) {
|
||||||
|
qe = of_find_node_by_type(NULL, "qe");
|
||||||
|
if (!qe)
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Find the 'firmware' child node */
|
||||||
|
for_each_child_of_node(qe, fw) {
|
||||||
|
if (strcmp(fw->name, "firmware") == 0)
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
of_node_put(qe);
|
||||||
|
|
||||||
|
/* Did we find the 'firmware' node? */
|
||||||
|
if (!fw)
|
||||||
|
return NULL;
|
||||||
|
|
||||||
|
qe_firmware_uploaded = 1;
|
||||||
|
|
||||||
|
/* Copy the data into qe_firmware_info*/
|
||||||
|
sprop = of_get_property(fw, "id", NULL);
|
||||||
|
if (sprop)
|
||||||
|
strncpy(qe_firmware_info.id, sprop,
|
||||||
|
sizeof(qe_firmware_info.id) - 1);
|
||||||
|
|
||||||
|
prop = of_find_property(fw, "extended-modes", NULL);
|
||||||
|
if (prop && (prop->length == sizeof(u64))) {
|
||||||
|
const u64 *iprop = prop->value;
|
||||||
|
|
||||||
|
qe_firmware_info.extended_modes = *iprop;
|
||||||
|
}
|
||||||
|
|
||||||
|
prop = of_find_property(fw, "virtual-traps", NULL);
|
||||||
|
if (prop && (prop->length == 32)) {
|
||||||
|
const u32 *iprop = prop->value;
|
||||||
|
|
||||||
|
for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
|
||||||
|
qe_firmware_info.vtraps[i] = iprop[i];
|
||||||
|
}
|
||||||
|
|
||||||
|
of_node_put(fw);
|
||||||
|
|
||||||
|
return &qe_firmware_info;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(qe_get_firmware_info);
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -19,6 +19,7 @@
|
||||||
#include <linux/stddef.h>
|
#include <linux/stddef.h>
|
||||||
#include <linux/interrupt.h>
|
#include <linux/interrupt.h>
|
||||||
#include <linux/err.h>
|
#include <linux/err.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
|
||||||
#include <asm/io.h>
|
#include <asm/io.h>
|
||||||
#include <asm/immap_qe.h>
|
#include <asm/immap_qe.h>
|
||||||
|
|
@ -41,6 +42,7 @@ u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
|
||||||
default: return QE_CR_SUBBLOCK_INVALID;
|
default: return QE_CR_SUBBLOCK_INVALID;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
|
||||||
|
|
||||||
void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
|
void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
|
||||||
{
|
{
|
||||||
|
|
@ -56,6 +58,7 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
|
||||||
qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
|
qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
|
||||||
QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
|
||||||
|
|
||||||
void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
|
void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
|
||||||
{
|
{
|
||||||
|
|
@ -65,6 +68,7 @@ void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
|
||||||
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
||||||
qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL(ucc_slow_stop_tx);
|
||||||
|
|
||||||
void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
|
void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
|
||||||
{
|
{
|
||||||
|
|
@ -74,6 +78,7 @@ void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
|
||||||
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
||||||
qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL(ucc_slow_restart_tx);
|
||||||
|
|
||||||
void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
|
void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
|
||||||
{
|
{
|
||||||
|
|
@ -94,6 +99,7 @@ void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
|
||||||
}
|
}
|
||||||
out_be32(&us_regs->gumr_l, gumr_l);
|
out_be32(&us_regs->gumr_l, gumr_l);
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL(ucc_slow_enable);
|
||||||
|
|
||||||
void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
|
void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
|
||||||
{
|
{
|
||||||
|
|
@ -114,6 +120,7 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
|
||||||
}
|
}
|
||||||
out_be32(&us_regs->gumr_l, gumr_l);
|
out_be32(&us_regs->gumr_l, gumr_l);
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL(ucc_slow_disable);
|
||||||
|
|
||||||
/* Initialize the UCC for Slow operations
|
/* Initialize the UCC for Slow operations
|
||||||
*
|
*
|
||||||
|
|
@ -347,6 +354,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
|
||||||
*uccs_ret = uccs;
|
*uccs_ret = uccs;
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL(ucc_slow_init);
|
||||||
|
|
||||||
void ucc_slow_free(struct ucc_slow_private * uccs)
|
void ucc_slow_free(struct ucc_slow_private * uccs)
|
||||||
{
|
{
|
||||||
|
|
@ -366,5 +374,5 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
|
||||||
|
|
||||||
kfree(uccs);
|
kfree(uccs);
|
||||||
}
|
}
|
||||||
|
EXPORT_SYMBOL(ucc_slow_free);
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -13,7 +13,6 @@ obj-y := entry.o traps.o time.o misc.o \
|
||||||
ppc_htab.o
|
ppc_htab.o
|
||||||
obj-$(CONFIG_MODULES) += ppc_ksyms.o
|
obj-$(CONFIG_MODULES) += ppc_ksyms.o
|
||||||
obj-$(CONFIG_PCI) += pci.o
|
obj-$(CONFIG_PCI) += pci.o
|
||||||
obj-$(CONFIG_RAPIDIO) += rio.o
|
|
||||||
obj-$(CONFIG_KGDB) += ppc-stub.o
|
obj-$(CONFIG_KGDB) += ppc-stub.o
|
||||||
obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
|
obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
|
||||||
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
|
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
|
||||||
|
|
|
||||||
|
|
@ -42,8 +42,6 @@
|
||||||
|
|
||||||
#include <mm/mmu_decl.h>
|
#include <mm/mmu_decl.h>
|
||||||
|
|
||||||
#include <syslib/ppc85xx_rio.h>
|
|
||||||
|
|
||||||
#include <platforms/85xx/mpc85xx_ads_common.h>
|
#include <platforms/85xx/mpc85xx_ads_common.h>
|
||||||
|
|
||||||
#ifndef CONFIG_PCI
|
#ifndef CONFIG_PCI
|
||||||
|
|
@ -190,6 +188,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
|
||||||
#endif /* CONFIG_PCI */
|
#endif /* CONFIG_PCI */
|
||||||
|
|
||||||
#ifdef CONFIG_RAPIDIO
|
#ifdef CONFIG_RAPIDIO
|
||||||
|
extern void mpc85xx_rio_setup(int law_start, int law_size);
|
||||||
void platform_rio_init(void)
|
void platform_rio_init(void)
|
||||||
{
|
{
|
||||||
/* 512MB RIO LAW at 0xc0000000 */
|
/* 512MB RIO LAW at 0xc0000000 */
|
||||||
|
|
|
||||||
|
|
@ -54,7 +54,6 @@
|
||||||
|
|
||||||
#include <syslib/cpm2_pic.h>
|
#include <syslib/cpm2_pic.h>
|
||||||
#include <syslib/ppc85xx_common.h>
|
#include <syslib/ppc85xx_common.h>
|
||||||
#include <syslib/ppc85xx_rio.h>
|
|
||||||
|
|
||||||
|
|
||||||
unsigned char __res[sizeof(bd_t)];
|
unsigned char __res[sizeof(bd_t)];
|
||||||
|
|
@ -270,6 +269,7 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn)
|
||||||
#endif /* CONFIG_PCI */
|
#endif /* CONFIG_PCI */
|
||||||
|
|
||||||
#ifdef CONFIG_RAPIDIO
|
#ifdef CONFIG_RAPIDIO
|
||||||
|
extern void mpc85xx_rio_setup(int law_start, int law_size);
|
||||||
void
|
void
|
||||||
platform_rio_init(void)
|
platform_rio_init(void)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -54,7 +54,6 @@
|
||||||
#include <syslib/ppc85xx_setup.h>
|
#include <syslib/ppc85xx_setup.h>
|
||||||
#include <syslib/cpm2_pic.h>
|
#include <syslib/cpm2_pic.h>
|
||||||
#include <syslib/ppc85xx_common.h>
|
#include <syslib/ppc85xx_common.h>
|
||||||
#include <syslib/ppc85xx_rio.h>
|
|
||||||
|
|
||||||
#ifndef CONFIG_PCI
|
#ifndef CONFIG_PCI
|
||||||
unsigned long isa_io_base = 0;
|
unsigned long isa_io_base = 0;
|
||||||
|
|
@ -309,6 +308,7 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn)
|
||||||
#endif /* CONFIG_PCI */
|
#endif /* CONFIG_PCI */
|
||||||
|
|
||||||
#ifdef CONFIG_RAPIDIO
|
#ifdef CONFIG_RAPIDIO
|
||||||
|
extern void mpc85xx_rio_setup(int law_start, int law_size);
|
||||||
void platform_rio_init(void)
|
void platform_rio_init(void)
|
||||||
{
|
{
|
||||||
/* 512MB RIO LAW at 0xc0000000 */
|
/* 512MB RIO LAW at 0xc0000000 */
|
||||||
|
|
|
||||||
|
|
@ -93,7 +93,6 @@ obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \
|
||||||
ifeq ($(CONFIG_85xx),y)
|
ifeq ($(CONFIG_85xx),y)
|
||||||
obj-$(CONFIG_PCI) += pci_auto.o
|
obj-$(CONFIG_PCI) += pci_auto.o
|
||||||
endif
|
endif
|
||||||
obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o
|
|
||||||
obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \
|
obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \
|
||||||
mpc83xx_sys.o mpc83xx_devices.o ipic.o
|
mpc83xx_sys.o mpc83xx_devices.o ipic.o
|
||||||
ifeq ($(CONFIG_83xx),y)
|
ifeq ($(CONFIG_83xx),y)
|
||||||
|
|
|
||||||
|
|
@ -1178,8 +1178,15 @@ static int __devinit find_phy(struct device_node *np,
|
||||||
struct device_node *phynode, *mdionode;
|
struct device_node *phynode, *mdionode;
|
||||||
struct resource res;
|
struct resource res;
|
||||||
int ret = 0, len;
|
int ret = 0, len;
|
||||||
|
const u32 *data;
|
||||||
|
|
||||||
const u32 *data = of_get_property(np, "phy-handle", &len);
|
data = of_get_property(np, "fixed-link", NULL);
|
||||||
|
if (data) {
|
||||||
|
snprintf(fpi->bus_id, 16, PHY_ID_FMT, 0, *data);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
data = of_get_property(np, "phy-handle", &len);
|
||||||
if (!data || len != 4)
|
if (!data || len != 4)
|
||||||
return -EINVAL;
|
return -EINVAL;
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -61,34 +61,12 @@ config ICPLUS_PHY
|
||||||
Currently supports the IP175C PHY.
|
Currently supports the IP175C PHY.
|
||||||
|
|
||||||
config FIXED_PHY
|
config FIXED_PHY
|
||||||
tristate "Drivers for PHY emulation on fixed speed/link"
|
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
|
||||||
---help---
|
---help---
|
||||||
Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
|
Adds the platform "fixed" MDIO Bus to cover the boards that use
|
||||||
but with the ability to manipulate the speed/link in software. The relevant MII
|
PHYs that are not connected to the real MDIO bus.
|
||||||
speed/duplex parameters could be effectively handled in a user-specified function.
|
|
||||||
Currently tested with mpc866ads.
|
|
||||||
|
|
||||||
config FIXED_MII_10_FDX
|
Currently tested with mpc866ads and mpc8349e-mitx.
|
||||||
bool "Emulation for 10M Fdx fixed PHY behavior"
|
|
||||||
depends on FIXED_PHY
|
|
||||||
|
|
||||||
config FIXED_MII_100_FDX
|
|
||||||
bool "Emulation for 100M Fdx fixed PHY behavior"
|
|
||||||
depends on FIXED_PHY
|
|
||||||
|
|
||||||
config FIXED_MII_1000_FDX
|
|
||||||
bool "Emulation for 1000M Fdx fixed PHY behavior"
|
|
||||||
depends on FIXED_PHY
|
|
||||||
|
|
||||||
config FIXED_MII_AMNT
|
|
||||||
int "Number of emulated PHYs to allocate "
|
|
||||||
depends on FIXED_PHY
|
|
||||||
default "1"
|
|
||||||
---help---
|
|
||||||
Sometimes it is required to have several independent emulated
|
|
||||||
PHYs on the bus (in case of multi-eth but phy-less HW for instance).
|
|
||||||
This control will have specified number allocated for each fixed
|
|
||||||
PHY type enabled.
|
|
||||||
|
|
||||||
config MDIO_BITBANG
|
config MDIO_BITBANG
|
||||||
tristate "Support for bitbanged MDIO buses"
|
tristate "Support for bitbanged MDIO buses"
|
||||||
|
|
|
||||||
|
|
@ -1,362 +1,253 @@
|
||||||
/*
|
/*
|
||||||
* drivers/net/phy/fixed.c
|
* Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
|
||||||
*
|
*
|
||||||
* Driver for fixed PHYs, when transceiver is able to operate in one fixed mode.
|
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
|
||||||
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
||||||
*
|
*
|
||||||
* Author: Vitaly Bordug
|
* Copyright (c) 2006-2007 MontaVista Software, Inc.
|
||||||
*
|
|
||||||
* Copyright (c) 2006 MontaVista Software, Inc.
|
|
||||||
*
|
*
|
||||||
* This program is free software; you can redistribute it and/or modify it
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
* under the terms of the GNU General Public License as published by the
|
* under the terms of the GNU General Public License as published by the
|
||||||
* Free Software Foundation; either version 2 of the License, or (at your
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
* option) any later version.
|
* option) any later version.
|
||||||
*
|
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <linux/kernel.h>
|
#include <linux/kernel.h>
|
||||||
#include <linux/string.h>
|
|
||||||
#include <linux/errno.h>
|
|
||||||
#include <linux/unistd.h>
|
|
||||||
#include <linux/slab.h>
|
|
||||||
#include <linux/interrupt.h>
|
|
||||||
#include <linux/init.h>
|
|
||||||
#include <linux/delay.h>
|
|
||||||
#include <linux/netdevice.h>
|
|
||||||
#include <linux/etherdevice.h>
|
|
||||||
#include <linux/skbuff.h>
|
|
||||||
#include <linux/spinlock.h>
|
|
||||||
#include <linux/mm.h>
|
|
||||||
#include <linux/module.h>
|
#include <linux/module.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/list.h>
|
||||||
#include <linux/mii.h>
|
#include <linux/mii.h>
|
||||||
#include <linux/ethtool.h>
|
|
||||||
#include <linux/phy.h>
|
#include <linux/phy.h>
|
||||||
#include <linux/phy_fixed.h>
|
#include <linux/phy_fixed.h>
|
||||||
|
|
||||||
#include <asm/io.h>
|
#define MII_REGS_NUM 29
|
||||||
#include <asm/irq.h>
|
|
||||||
#include <asm/uaccess.h>
|
|
||||||
|
|
||||||
/* we need to track the allocated pointers in order to free them on exit */
|
struct fixed_mdio_bus {
|
||||||
static struct fixed_info *fixed_phy_ptrs[CONFIG_FIXED_MII_AMNT*MAX_PHY_AMNT];
|
int irqs[PHY_MAX_ADDR];
|
||||||
|
struct mii_bus mii_bus;
|
||||||
|
struct list_head phys;
|
||||||
|
};
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------------
|
struct fixed_phy {
|
||||||
* If something weird is required to be done with link/speed,
|
int id;
|
||||||
* network driver is able to assign a function to implement this.
|
u16 regs[MII_REGS_NUM];
|
||||||
* May be useful for PHY's that need to be software-driven.
|
struct phy_device *phydev;
|
||||||
*-----------------------------------------------------------------------------*/
|
struct fixed_phy_status status;
|
||||||
int fixed_mdio_set_link_update(struct phy_device *phydev,
|
int (*link_update)(struct net_device *, struct fixed_phy_status *);
|
||||||
int (*link_update) (struct net_device *,
|
struct list_head node;
|
||||||
struct fixed_phy_status *))
|
};
|
||||||
|
|
||||||
|
static struct platform_device *pdev;
|
||||||
|
static struct fixed_mdio_bus platform_fmb = {
|
||||||
|
.phys = LIST_HEAD_INIT(platform_fmb.phys),
|
||||||
|
};
|
||||||
|
|
||||||
|
static int fixed_phy_update_regs(struct fixed_phy *fp)
|
||||||
{
|
{
|
||||||
struct fixed_info *fixed;
|
u16 bmsr = BMSR_ANEGCAPABLE;
|
||||||
|
|
||||||
if (link_update == NULL)
|
|
||||||
return -EINVAL;
|
|
||||||
|
|
||||||
if (phydev) {
|
|
||||||
if (phydev->bus) {
|
|
||||||
fixed = phydev->bus->priv;
|
|
||||||
fixed->link_update = link_update;
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return -EINVAL;
|
|
||||||
}
|
|
||||||
|
|
||||||
EXPORT_SYMBOL(fixed_mdio_set_link_update);
|
|
||||||
|
|
||||||
struct fixed_info *fixed_mdio_get_phydev (int phydev_ind)
|
|
||||||
{
|
|
||||||
if (phydev_ind >= MAX_PHY_AMNT)
|
|
||||||
return NULL;
|
|
||||||
return fixed_phy_ptrs[phydev_ind];
|
|
||||||
}
|
|
||||||
|
|
||||||
EXPORT_SYMBOL(fixed_mdio_get_phydev);
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------------
|
|
||||||
* This is used for updating internal mii regs from the status
|
|
||||||
*-----------------------------------------------------------------------------*/
|
|
||||||
#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX)
|
|
||||||
static int fixed_mdio_update_regs(struct fixed_info *fixed)
|
|
||||||
{
|
|
||||||
u16 *regs = fixed->regs;
|
|
||||||
u16 bmsr = 0;
|
|
||||||
u16 bmcr = 0;
|
u16 bmcr = 0;
|
||||||
|
u16 lpagb = 0;
|
||||||
|
u16 lpa = 0;
|
||||||
|
|
||||||
if (!regs) {
|
if (fp->status.duplex) {
|
||||||
printk(KERN_ERR "%s: regs not set up", __FUNCTION__);
|
|
||||||
return -EINVAL;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (fixed->phy_status.link)
|
|
||||||
bmsr |= BMSR_LSTATUS;
|
|
||||||
|
|
||||||
if (fixed->phy_status.duplex) {
|
|
||||||
bmcr |= BMCR_FULLDPLX;
|
bmcr |= BMCR_FULLDPLX;
|
||||||
|
|
||||||
switch (fixed->phy_status.speed) {
|
switch (fp->status.speed) {
|
||||||
|
case 1000:
|
||||||
|
bmsr |= BMSR_ESTATEN;
|
||||||
|
bmcr |= BMCR_SPEED1000;
|
||||||
|
lpagb |= LPA_1000FULL;
|
||||||
|
break;
|
||||||
case 100:
|
case 100:
|
||||||
bmsr |= BMSR_100FULL;
|
bmsr |= BMSR_100FULL;
|
||||||
bmcr |= BMCR_SPEED100;
|
bmcr |= BMCR_SPEED100;
|
||||||
|
lpa |= LPA_100FULL;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 10:
|
case 10:
|
||||||
bmsr |= BMSR_10FULL;
|
bmsr |= BMSR_10FULL;
|
||||||
|
lpa |= LPA_10FULL;
|
||||||
break;
|
break;
|
||||||
|
default:
|
||||||
|
printk(KERN_WARNING "fixed phy: unknown speed\n");
|
||||||
|
return -EINVAL;
|
||||||
}
|
}
|
||||||
} else {
|
} else {
|
||||||
switch (fixed->phy_status.speed) {
|
switch (fp->status.speed) {
|
||||||
|
case 1000:
|
||||||
|
bmsr |= BMSR_ESTATEN;
|
||||||
|
bmcr |= BMCR_SPEED1000;
|
||||||
|
lpagb |= LPA_1000HALF;
|
||||||
|
break;
|
||||||
case 100:
|
case 100:
|
||||||
bmsr |= BMSR_100HALF;
|
bmsr |= BMSR_100HALF;
|
||||||
bmcr |= BMCR_SPEED100;
|
bmcr |= BMCR_SPEED100;
|
||||||
|
lpa |= LPA_100HALF;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 10:
|
case 10:
|
||||||
bmsr |= BMSR_100HALF;
|
bmsr |= BMSR_10HALF;
|
||||||
|
lpa |= LPA_10HALF;
|
||||||
break;
|
break;
|
||||||
|
default:
|
||||||
|
printk(KERN_WARNING "fixed phy: unknown speed\n");
|
||||||
|
return -EINVAL;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
regs[MII_BMCR] = bmcr;
|
if (fp->status.link)
|
||||||
regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx */
|
bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
|
||||||
|
|
||||||
|
if (fp->status.pause)
|
||||||
|
lpa |= LPA_PAUSE_CAP;
|
||||||
|
|
||||||
|
if (fp->status.asym_pause)
|
||||||
|
lpa |= LPA_PAUSE_ASYM;
|
||||||
|
|
||||||
|
fp->regs[MII_PHYSID1] = fp->id >> 16;
|
||||||
|
fp->regs[MII_PHYSID2] = fp->id;
|
||||||
|
|
||||||
|
fp->regs[MII_BMSR] = bmsr;
|
||||||
|
fp->regs[MII_BMCR] = bmcr;
|
||||||
|
fp->regs[MII_LPA] = lpa;
|
||||||
|
fp->regs[MII_STAT1000] = lpagb;
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location)
|
static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
|
||||||
{
|
{
|
||||||
struct fixed_info *fixed = bus->priv;
|
struct fixed_mdio_bus *fmb = container_of(bus, struct fixed_mdio_bus,
|
||||||
|
mii_bus);
|
||||||
|
struct fixed_phy *fp;
|
||||||
|
|
||||||
/* if user has registered link update callback, use it */
|
if (reg_num >= MII_REGS_NUM)
|
||||||
if (fixed->phydev)
|
|
||||||
if (fixed->phydev->attached_dev) {
|
|
||||||
if (fixed->link_update) {
|
|
||||||
fixed->link_update(fixed->phydev->attached_dev,
|
|
||||||
&fixed->phy_status);
|
|
||||||
fixed_mdio_update_regs(fixed);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
if ((unsigned int)location >= fixed->regs_num)
|
|
||||||
return -1;
|
return -1;
|
||||||
return fixed->regs[location];
|
|
||||||
}
|
|
||||||
|
|
||||||
static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location,
|
list_for_each_entry(fp, &fmb->phys, node) {
|
||||||
u16 val)
|
if (fp->id == phy_id) {
|
||||||
{
|
/* Issue callback if user registered it. */
|
||||||
/* do nothing for now */
|
if (fp->link_update) {
|
||||||
return 0;
|
fp->link_update(fp->phydev->attached_dev,
|
||||||
}
|
&fp->status);
|
||||||
|
fixed_phy_update_regs(fp);
|
||||||
static int fixed_mii_reset(struct mii_bus *bus)
|
}
|
||||||
{
|
return fp->regs[reg_num];
|
||||||
/*nothing here - no way/need to reset it */
|
}
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
static int fixed_config_aneg(struct phy_device *phydev)
|
|
||||||
{
|
|
||||||
/* :TODO:03/13/2006 09:45:37 PM::
|
|
||||||
The full autoneg funcionality can be emulated,
|
|
||||||
but no need to have anything here for now
|
|
||||||
*/
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------------
|
|
||||||
* the manual bind will do the magic - with phy_id_mask == 0
|
|
||||||
* match will never return true...
|
|
||||||
*-----------------------------------------------------------------------------*/
|
|
||||||
static struct phy_driver fixed_mdio_driver = {
|
|
||||||
.name = "Fixed PHY",
|
|
||||||
#ifdef CONFIG_FIXED_MII_1000_FDX
|
|
||||||
.features = PHY_GBIT_FEATURES,
|
|
||||||
#else
|
|
||||||
.features = PHY_BASIC_FEATURES,
|
|
||||||
#endif
|
|
||||||
.config_aneg = fixed_config_aneg,
|
|
||||||
.read_status = genphy_read_status,
|
|
||||||
.driver = { .owner = THIS_MODULE, },
|
|
||||||
};
|
|
||||||
|
|
||||||
static void fixed_mdio_release(struct device *dev)
|
|
||||||
{
|
|
||||||
struct phy_device *phydev = container_of(dev, struct phy_device, dev);
|
|
||||||
struct mii_bus *bus = phydev->bus;
|
|
||||||
struct fixed_info *fixed = bus->priv;
|
|
||||||
|
|
||||||
kfree(phydev);
|
|
||||||
kfree(bus->dev);
|
|
||||||
kfree(bus);
|
|
||||||
kfree(fixed->regs);
|
|
||||||
kfree(fixed);
|
|
||||||
}
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------------
|
|
||||||
* This func is used to create all the necessary stuff, bind
|
|
||||||
* the fixed phy driver and register all it on the mdio_bus_type.
|
|
||||||
* speed is either 10 or 100 or 1000, duplex is boolean.
|
|
||||||
* number is used to create multiple fixed PHYs, so that several devices can
|
|
||||||
* utilize them simultaneously.
|
|
||||||
*
|
|
||||||
* The device on mdio bus will look like [bus_id]:[phy_id],
|
|
||||||
* bus_id = number
|
|
||||||
* phy_id = speed+duplex.
|
|
||||||
*-----------------------------------------------------------------------------*/
|
|
||||||
#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX)
|
|
||||||
struct fixed_info *fixed_mdio_register_device(
|
|
||||||
int bus_id, int speed, int duplex, u8 phy_id)
|
|
||||||
{
|
|
||||||
struct mii_bus *new_bus;
|
|
||||||
struct fixed_info *fixed;
|
|
||||||
struct phy_device *phydev;
|
|
||||||
int err;
|
|
||||||
|
|
||||||
struct device *dev = kzalloc(sizeof(struct device), GFP_KERNEL);
|
|
||||||
|
|
||||||
if (dev == NULL)
|
|
||||||
goto err_dev_alloc;
|
|
||||||
|
|
||||||
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
|
|
||||||
|
|
||||||
if (new_bus == NULL)
|
|
||||||
goto err_bus_alloc;
|
|
||||||
|
|
||||||
fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);
|
|
||||||
|
|
||||||
if (fixed == NULL)
|
|
||||||
goto err_fixed_alloc;
|
|
||||||
|
|
||||||
fixed->regs = kzalloc(MII_REGS_NUM * sizeof(int), GFP_KERNEL);
|
|
||||||
if (NULL == fixed->regs)
|
|
||||||
goto err_fixed_regs_alloc;
|
|
||||||
|
|
||||||
fixed->regs_num = MII_REGS_NUM;
|
|
||||||
fixed->phy_status.speed = speed;
|
|
||||||
fixed->phy_status.duplex = duplex;
|
|
||||||
fixed->phy_status.link = 1;
|
|
||||||
|
|
||||||
new_bus->name = "Fixed MII Bus";
|
|
||||||
new_bus->read = &fixed_mii_read;
|
|
||||||
new_bus->write = &fixed_mii_write;
|
|
||||||
new_bus->reset = &fixed_mii_reset;
|
|
||||||
/*set up workspace */
|
|
||||||
fixed_mdio_update_regs(fixed);
|
|
||||||
new_bus->priv = fixed;
|
|
||||||
|
|
||||||
new_bus->dev = dev;
|
|
||||||
dev_set_drvdata(dev, new_bus);
|
|
||||||
|
|
||||||
/* create phy_device and register it on the mdio bus */
|
|
||||||
phydev = phy_device_create(new_bus, 0, 0);
|
|
||||||
if (phydev == NULL)
|
|
||||||
goto err_phy_dev_create;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Put the phydev pointer into the fixed pack so that bus read/write
|
|
||||||
* code could be able to access for instance attached netdev. Well it
|
|
||||||
* doesn't have to do so, only in case of utilizing user-specified
|
|
||||||
* link-update...
|
|
||||||
*/
|
|
||||||
|
|
||||||
fixed->phydev = phydev;
|
|
||||||
phydev->speed = speed;
|
|
||||||
phydev->duplex = duplex;
|
|
||||||
|
|
||||||
phydev->irq = PHY_IGNORE_INTERRUPT;
|
|
||||||
phydev->dev.bus = &mdio_bus_type;
|
|
||||||
|
|
||||||
snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
|
|
||||||
PHY_ID_FMT, bus_id, phy_id);
|
|
||||||
|
|
||||||
phydev->bus = new_bus;
|
|
||||||
|
|
||||||
phydev->dev.driver = &fixed_mdio_driver.driver;
|
|
||||||
phydev->dev.release = fixed_mdio_release;
|
|
||||||
err = phydev->dev.driver->probe(&phydev->dev);
|
|
||||||
if (err < 0) {
|
|
||||||
printk(KERN_ERR "Phy %s: problems with fixed driver\n",
|
|
||||||
phydev->dev.bus_id);
|
|
||||||
goto err_out;
|
|
||||||
}
|
}
|
||||||
err = device_register(&phydev->dev);
|
|
||||||
if (err) {
|
|
||||||
printk(KERN_ERR "Phy %s failed to register\n",
|
|
||||||
phydev->dev.bus_id);
|
|
||||||
goto err_out;
|
|
||||||
}
|
|
||||||
//phydev->state = PHY_RUNNING; /* make phy go up quick, but in 10Mbit/HDX
|
|
||||||
return fixed;
|
|
||||||
|
|
||||||
err_out:
|
|
||||||
kfree(phydev);
|
|
||||||
err_phy_dev_create:
|
|
||||||
kfree(fixed->regs);
|
|
||||||
err_fixed_regs_alloc:
|
|
||||||
kfree(fixed);
|
|
||||||
err_fixed_alloc:
|
|
||||||
kfree(new_bus);
|
|
||||||
err_bus_alloc:
|
|
||||||
kfree(dev);
|
|
||||||
err_dev_alloc:
|
|
||||||
|
|
||||||
return NULL;
|
|
||||||
|
|
||||||
|
return 0xFFFF;
|
||||||
}
|
}
|
||||||
#endif
|
|
||||||
|
|
||||||
MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
|
static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
|
||||||
|
u16 val)
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* If something weird is required to be done with link/speed,
|
||||||
|
* network driver is able to assign a function to implement this.
|
||||||
|
* May be useful for PHY's that need to be software-driven.
|
||||||
|
*/
|
||||||
|
int fixed_phy_set_link_update(struct phy_device *phydev,
|
||||||
|
int (*link_update)(struct net_device *,
|
||||||
|
struct fixed_phy_status *))
|
||||||
|
{
|
||||||
|
struct fixed_mdio_bus *fmb = &platform_fmb;
|
||||||
|
struct fixed_phy *fp;
|
||||||
|
|
||||||
|
if (!link_update || !phydev || !phydev->bus)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
list_for_each_entry(fp, &fmb->phys, node) {
|
||||||
|
if (fp->id == phydev->phy_id) {
|
||||||
|
fp->link_update = link_update;
|
||||||
|
fp->phydev = phydev;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return -ENOENT;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
|
||||||
|
|
||||||
|
int fixed_phy_add(unsigned int irq, int phy_id,
|
||||||
|
struct fixed_phy_status *status)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
struct fixed_mdio_bus *fmb = &platform_fmb;
|
||||||
|
struct fixed_phy *fp;
|
||||||
|
|
||||||
|
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
|
||||||
|
if (!fp)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
|
||||||
|
|
||||||
|
fmb->irqs[phy_id] = irq;
|
||||||
|
|
||||||
|
fp->id = phy_id;
|
||||||
|
fp->status = *status;
|
||||||
|
|
||||||
|
ret = fixed_phy_update_regs(fp);
|
||||||
|
if (ret)
|
||||||
|
goto err_regs;
|
||||||
|
|
||||||
|
list_add_tail(&fp->node, &fmb->phys);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
err_regs:
|
||||||
|
kfree(fp);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(fixed_phy_add);
|
||||||
|
|
||||||
|
static int __init fixed_mdio_bus_init(void)
|
||||||
|
{
|
||||||
|
struct fixed_mdio_bus *fmb = &platform_fmb;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
|
||||||
|
if (!pdev) {
|
||||||
|
ret = -ENOMEM;
|
||||||
|
goto err_pdev;
|
||||||
|
}
|
||||||
|
|
||||||
|
fmb->mii_bus.id = 0;
|
||||||
|
fmb->mii_bus.name = "Fixed MDIO Bus";
|
||||||
|
fmb->mii_bus.dev = &pdev->dev;
|
||||||
|
fmb->mii_bus.read = &fixed_mdio_read;
|
||||||
|
fmb->mii_bus.write = &fixed_mdio_write;
|
||||||
|
fmb->mii_bus.irq = fmb->irqs;
|
||||||
|
|
||||||
|
ret = mdiobus_register(&fmb->mii_bus);
|
||||||
|
if (ret)
|
||||||
|
goto err_mdiobus_reg;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
err_mdiobus_reg:
|
||||||
|
platform_device_unregister(pdev);
|
||||||
|
err_pdev:
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
module_init(fixed_mdio_bus_init);
|
||||||
|
|
||||||
|
static void __exit fixed_mdio_bus_exit(void)
|
||||||
|
{
|
||||||
|
struct fixed_mdio_bus *fmb = &platform_fmb;
|
||||||
|
struct fixed_phy *fp;
|
||||||
|
|
||||||
|
mdiobus_unregister(&fmb->mii_bus);
|
||||||
|
platform_device_unregister(pdev);
|
||||||
|
|
||||||
|
list_for_each_entry(fp, &fmb->phys, node) {
|
||||||
|
list_del(&fp->node);
|
||||||
|
kfree(fp);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
module_exit(fixed_mdio_bus_exit);
|
||||||
|
|
||||||
|
MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)");
|
||||||
MODULE_AUTHOR("Vitaly Bordug");
|
MODULE_AUTHOR("Vitaly Bordug");
|
||||||
MODULE_LICENSE("GPL");
|
MODULE_LICENSE("GPL");
|
||||||
|
|
||||||
static int __init fixed_init(void)
|
|
||||||
{
|
|
||||||
int cnt = 0;
|
|
||||||
int i;
|
|
||||||
/* register on the bus... Not expected to be matched
|
|
||||||
* with anything there...
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
phy_driver_register(&fixed_mdio_driver);
|
|
||||||
|
|
||||||
/* We will create several mdio devices here, and will bound the upper
|
|
||||||
* driver to them.
|
|
||||||
*
|
|
||||||
* Then the external software can lookup the phy bus by searching
|
|
||||||
* for 0:101, to be connected to the virtual 100M Fdx phy.
|
|
||||||
*
|
|
||||||
* In case several virtual PHYs required, the bus_id will be in form
|
|
||||||
* [num]:[duplex]+[speed], which make it able even to define
|
|
||||||
* driver-specific link control callback, if for instance PHY is
|
|
||||||
* completely SW-driven.
|
|
||||||
*/
|
|
||||||
for (i=1; i <= CONFIG_FIXED_MII_AMNT; i++) {
|
|
||||||
#ifdef CONFIG_FIXED_MII_1000_FDX
|
|
||||||
fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(0, 1000, 1, i);
|
|
||||||
#endif
|
|
||||||
#ifdef CONFIG_FIXED_MII_100_FDX
|
|
||||||
fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(1, 100, 1, i);
|
|
||||||
#endif
|
|
||||||
#ifdef CONFIG_FIXED_MII_10_FDX
|
|
||||||
fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(2, 10, 1, i);
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void __exit fixed_exit(void)
|
|
||||||
{
|
|
||||||
int i;
|
|
||||||
|
|
||||||
phy_driver_unregister(&fixed_mdio_driver);
|
|
||||||
for (i=0; i < MAX_PHY_AMNT; i++)
|
|
||||||
if ( fixed_phy_ptrs[i] )
|
|
||||||
device_unregister(&fixed_phy_ptrs[i]->phydev->dev);
|
|
||||||
}
|
|
||||||
|
|
||||||
module_init(fixed_init);
|
|
||||||
module_exit(fixed_exit);
|
|
||||||
|
|
|
||||||
|
|
@ -23,6 +23,7 @@
|
||||||
#include <linux/module.h>
|
#include <linux/module.h>
|
||||||
#include <linux/spinlock.h>
|
#include <linux/spinlock.h>
|
||||||
#include <linux/slab.h>
|
#include <linux/slab.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
|
||||||
#include "rio.h"
|
#include "rio.h"
|
||||||
|
|
||||||
|
|
@ -476,8 +477,8 @@ int rio_init_mports(void)
|
||||||
port->iores.end - port->iores.start,
|
port->iores.end - port->iores.start,
|
||||||
port->name)) {
|
port->name)) {
|
||||||
printk(KERN_ERR
|
printk(KERN_ERR
|
||||||
"RIO: Error requesting master port region %8.8lx-%8.8lx\n",
|
"RIO: Error requesting master port region 0x%016llx-0x%016llx\n",
|
||||||
port->iores.start, port->iores.end - 1);
|
(u64)port->iores.start, (u64)port->iores.end - 1);
|
||||||
rc = -ENOMEM;
|
rc = -ENOMEM;
|
||||||
goto out;
|
goto out;
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -1284,4 +1284,14 @@ config SERIAL_OF_PLATFORM
|
||||||
Currently, only 8250 compatible ports are supported, but
|
Currently, only 8250 compatible ports are supported, but
|
||||||
others can easily be added.
|
others can easily be added.
|
||||||
|
|
||||||
|
config SERIAL_QE
|
||||||
|
tristate "Freescale QUICC Engine serial port support"
|
||||||
|
depends on QUICC_ENGINE
|
||||||
|
select SERIAL_CORE
|
||||||
|
select FW_LOADER
|
||||||
|
default n
|
||||||
|
help
|
||||||
|
This driver supports the QE serial ports on Freescale embedded
|
||||||
|
PowerPC that contain a QUICC Engine.
|
||||||
|
|
||||||
endmenu
|
endmenu
|
||||||
|
|
|
||||||
|
|
@ -64,3 +64,4 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
|
||||||
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
|
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
|
||||||
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
|
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
|
||||||
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
|
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
|
||||||
|
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
|
||||||
|
|
|
||||||
|
|
@ -165,9 +165,9 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
|
||||||
* really has to get out of the driver so boards can
|
* really has to get out of the driver so boards can
|
||||||
* be supported in a sane fashion.
|
* be supported in a sane fashion.
|
||||||
*/
|
*/
|
||||||
|
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
|
||||||
#ifndef CONFIG_STX_GP3
|
#ifndef CONFIG_STX_GP3
|
||||||
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
|
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
|
||||||
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
|
|
||||||
|
|
||||||
io->iop_pparb |= 0x008b0000;
|
io->iop_pparb |= 0x008b0000;
|
||||||
io->iop_pdirb |= 0x00880000;
|
io->iop_pdirb |= 0x00880000;
|
||||||
|
|
|
||||||
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
|
|
@ -393,9 +393,39 @@ struct dbg {
|
||||||
u8 res2[0x48];
|
u8 res2[0x48];
|
||||||
} __attribute__ ((packed));
|
} __attribute__ ((packed));
|
||||||
|
|
||||||
/* RISC Special Registers (Trap and Breakpoint) */
|
/*
|
||||||
|
* RISC Special Registers (Trap and Breakpoint). These are described in
|
||||||
|
* the QE Developer's Handbook.
|
||||||
|
*/
|
||||||
struct rsp {
|
struct rsp {
|
||||||
u32 reg[0x40]; /* 64 32-bit registers */
|
__be32 tibcr[16]; /* Trap/instruction breakpoint control regs */
|
||||||
|
u8 res0[64];
|
||||||
|
__be32 ibcr0;
|
||||||
|
__be32 ibs0;
|
||||||
|
__be32 ibcnr0;
|
||||||
|
u8 res1[4];
|
||||||
|
__be32 ibcr1;
|
||||||
|
__be32 ibs1;
|
||||||
|
__be32 ibcnr1;
|
||||||
|
__be32 npcr;
|
||||||
|
__be32 dbcr;
|
||||||
|
__be32 dbar;
|
||||||
|
__be32 dbamr;
|
||||||
|
__be32 dbsr;
|
||||||
|
__be32 dbcnr;
|
||||||
|
u8 res2[12];
|
||||||
|
__be32 dbdr_h;
|
||||||
|
__be32 dbdr_l;
|
||||||
|
__be32 dbdmr_h;
|
||||||
|
__be32 dbdmr_l;
|
||||||
|
__be32 bsr;
|
||||||
|
__be32 bor;
|
||||||
|
__be32 bior;
|
||||||
|
u8 res3[4];
|
||||||
|
__be32 iatr[4];
|
||||||
|
__be32 eccr; /* Exception control configuration register */
|
||||||
|
__be32 eicr;
|
||||||
|
u8 res4[0x100-0xf8];
|
||||||
} __attribute__ ((packed));
|
} __attribute__ ((packed));
|
||||||
|
|
||||||
struct qe_immap {
|
struct qe_immap {
|
||||||
|
|
|
||||||
Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше
Загрузка…
Ссылка в новой задаче