microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

OMAP1: pass LCD config with omapfb_set_lcd_config() 

LCD config for old omapfb driver is passed with OMAP_TAG_LCD from board
files or from the bootloader. In an effort to remove OMAP_TAG_LCD, this
patch adds omapfb_set_lcd_config() function that the board files can
call to set the LCD config.

This has the drawback that configuration can no longer come from the
bootloader. Of the boards supported by the kernel, this should only
affect N770 which depends on the data from the bootloader. This patch
adds an LCD config for N770 to its board files, but that is most
probably broken. Fixing this would need information about the HW setup
in N770 boards.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tomi Valkeinen 2011-09-20 15:23:13 +03:00
Родитель f060f95365
Коммит ddba6c7f7e
15 изменённых файлов: 64 добавлений и 92 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

9
arch/arm/mach-omap1/board-ams-delta.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
#include <linux/omapfb.h>
#include <media/soc_camera.h>
@ -169,10 +170,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
.pins[0] = 2,
};
static struct omap_board_config_kernel ams_delta_config[] __initdata = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
};
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
@ -302,8 +299,6 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
omap_board_config = ams_delta_config;
omap_board_config_size = ARRAY_SIZE(ams_delta_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
@ -321,6 +316,8 @@ static void __init ams_delta_init(void)
ams_delta_init_fiq();
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
omapfb_set_lcd_config(&ams_delta_lcd_config);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {

9
arch/arm/mach-omap1/board-fsample.c
Просмотреть файл

@ -21,6 +21,7 @@
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -290,10 +291,6 @@ static struct omap_lcd_config fsample_lcd_config = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel fsample_config[] __initdata = {
{ OMAP_TAG_LCD, &fsample_lcd_config },
};
static void __init omap_fsample_init(void)
{
/* Early, board-dependent init */
@ -352,10 +349,10 @@ static void __init omap_fsample_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = fsample_config;
omap_board_config_size = ARRAY_SIZE(fsample_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omapfb_set_lcd_config(&fsample_lcd_config);
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */

9
arch/arm/mach-omap1/board-h2.c
Просмотреть файл

@ -30,6 +30,7 @@
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
@ -391,10 +392,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_LCD, &h2_lcd_config },
};
static void __init h2_init(void)
{
h2_init_smc91x();
@ -438,13 +435,13 @@ static void __init h2_init(void)
omap_cfg_reg(N19_1610_KBR5);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
omap1_usb_init(&h2_usb_config);
h2_mmc_init();
omapfb_set_lcd_config(&h2_lcd_config);
}
MACHINE_START(OMAP_H2, "TI-H2")

9
arch/arm/mach-omap1/board-h3.c
Просмотреть файл

@ -30,6 +30,7 @@
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <asm/setup.h>
#include <asm/page.h>
@ -370,10 +371,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h3_config[] __initdata = {
{ OMAP_TAG_LCD, &h3_lcd_config },
};
static struct i2c_board_info __initdata h3_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65013", 0x48),
@ -426,13 +423,13 @@ static void __init h3_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
omap_board_config = h3_config;
omap_board_config_size = ARRAY_SIZE(h3_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
omap1_usb_init(&h3_usb_config);
h3_mmc_init();
omapfb_set_lcd_config(&h3_lcd_config);
}
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")

9
arch/arm/mach-omap1/board-htcherald.c
Просмотреть файл

@ -36,6 +36,7 @@
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/omapfb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -398,10 +399,6 @@ static struct omap_lcd_config htcherald_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel htcherald_config[] __initdata = {
{ OMAP_TAG_LCD, &htcherald_lcd_config },
};
static struct platform_device lcd_device = {
.name = "lcd_htcherald",
.id = -1,
@ -580,8 +577,6 @@ static void __init htcherald_init(void)
printk(KERN_INFO "HTC Herald init.\n");
/* Do board initialization before we register all the devices */
omap_board_config = htcherald_config;
omap_board_config_size = ARRAY_SIZE(htcherald_config);
platform_add_devices(devices, ARRAY_SIZE(devices));
htcherald_disable_watchdog();
@ -598,6 +593,8 @@ static void __init htcherald_init(void)
htc_mmc_data[0] = &htc_mmc1_data;
omap1_init_mmc(htc_mmc_data, 1);
#endif
omapfb_set_lcd_config(&htcherald_lcd_config);
}
MACHINE_START(HERALD, "HTC Herald")

11
arch/arm/mach-omap1/board-innovator.c
Просмотреть файл

@ -25,6 +25,7 @@
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -370,10 +371,6 @@ static inline void innovator_mmc_init(void)
}
#endif
static struct omap_board_config_kernel innovator_config[] = {
{ OMAP_TAG_LCD, NULL },
};
static void __init innovator_init(void)
{
if (cpu_is_omap1510())
@ -416,17 +413,15 @@ static void __init innovator_init(void)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1_usb_init(&innovator1510_usb_config);
innovator_config[1].data = &innovator1510_lcd_config;
omapfb_set_lcd_config(&innovator1510_lcd_config);
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
omap1_usb_init(&h2_usb_config);
innovator_config[1].data = &innovator1610_lcd_config;
omapfb_set_lcd_config(&innovator1610_lcd_config);
}
#endif
omap_board_config = innovator_config;
omap_board_config_size = ARRAY_SIZE(innovator_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
innovator_mmc_init();

13
arch/arm/mach-omap1/board-nokia770.c
Просмотреть файл

@ -98,15 +98,16 @@ static struct mipid_platform_data nokia770_mipid_platform_data = {
.shutdown = mipid_shutdown,
};
static struct omap_lcd_config nokia770_lcd_config __initdata = {
.ctrl_name = "hwa742",
};
static void __init mipid_dev_init(void)
{
const struct omap_lcd_config *conf;
nokia770_mipid_platform_data.nreset_gpio = 13;
nokia770_mipid_platform_data.data_lines = 16;
conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
if (conf != NULL) {
nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
nokia770_mipid_platform_data.data_lines = conf->data_lines;
}
omapfb_set_lcd_config(&nokia770_lcd_config);
}
static void __init ads7846_dev_init(void)

14
arch/arm/mach-omap1/board-osk.c
Просмотреть файл

@ -34,6 +34,7 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -300,12 +301,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
};
#endif
static struct omap_board_config_kernel osk_config[] __initdata = {
#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
#endif
};
#ifdef CONFIG_OMAP_OSK_MISTRAL
#include <linux/input.h>
@ -549,8 +544,6 @@ static void __init osk_init(void)
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
omap_board_config = osk_config;
omap_board_config_size = ARRAY_SIZE(osk_config);
l = omap_readl(USB_TRANSCEIVER_CTRL);
l |= (3 << 1);
@ -567,6 +560,11 @@ static void __init osk_init(void)
omap_register_i2c_bus(1, 400, osk_i2c_board_info,
ARRAY_SIZE(osk_i2c_board_info));
osk_mistral_init();
#ifdef CONFIG_OMAP_OSK_MISTRAL
omapfb_set_lcd_config(&osk_lcd_config);
#endif
}
MACHINE_START(OMAP_OSK, "TI-OSK")

10
arch/arm/mach-omap1/board-palmte.c
Просмотреть файл

@ -27,6 +27,7 @@
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -209,10 +210,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_LCD, &palmte_lcd_config },
};
static struct spi_board_info palmte_spi_info[] __initdata = {
{
.modalias = "tsc2102",
@ -250,9 +247,6 @@ static void __init omap_palmte_init(void)
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
omap_board_config = palmte_config;
omap_board_config_size = ARRAY_SIZE(palmte_config);
platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
@ -260,6 +254,8 @@ static void __init omap_palmte_init(void)
omap_serial_init();
omap1_usb_init(&palmte_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
omapfb_set_lcd_config(&palmte_lcd_config);
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")

10
arch/arm/mach-omap1/board-palmtt.c
Просмотреть файл

@ -24,6 +24,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -273,10 +274,6 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel palmtt_config[] __initdata = {
{ OMAP_TAG_LCD, &palmtt_lcd_config },
};
static void __init omap_mpu_wdt_mode(int mode) {
if (mode)
omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
@ -298,15 +295,14 @@ static void __init omap_palmtt_init(void)
omap_mpu_wdt_mode(0);
omap_board_config = palmtt_config;
omap_board_config_size = ARRAY_SIZE(palmtt_config);
platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
omap1_usb_init(&palmtt_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
omapfb_set_lcd_config(&palmtt_lcd_config);
}
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")

10
arch/arm/mach-omap1/board-palmz71.c
Просмотреть файл

@ -27,6 +27,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -239,10 +240,6 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel palmz71_config[] __initdata = {
{OMAP_TAG_LCD, &palmz71_lcd_config},
};
static irqreturn_t
palmz71_powercable(int irq, void *dev_id)
{
@ -313,9 +310,6 @@ omap_palmz71_init(void)
palmz71_gpio_setup(1);
omap_mpu_wdt_mode(0);
omap_board_config = palmz71_config;
omap_board_config_size = ARRAY_SIZE(palmz71_config);
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(palmz71_boardinfo,
@ -324,6 +318,8 @@ omap_palmz71_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
palmz71_gpio_setup(0);
omapfb_set_lcd_config(&palmz71_lcd_config);
}
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")

9
arch/arm/mach-omap1/board-perseus2.c
Просмотреть файл

@ -21,6 +21,7 @@
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -249,10 +250,6 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel perseus2_config[] __initdata = {
{ OMAP_TAG_LCD, &perseus2_lcd_config },
};
static void __init perseus2_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
@ -320,10 +317,10 @@ static void __init omap_perseus2_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = perseus2_config;
omap_board_config_size = ARRAY_SIZE(perseus2_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omapfb_set_lcd_config(&perseus2_lcd_config);
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */

10
arch/arm/mach-omap1/board-sx1.c
Просмотреть файл

@ -27,6 +27,7 @@
#include <linux/i2c.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -371,11 +372,6 @@ static struct platform_device *sx1_devices[] __initdata = {
&sx1_lcd_device,
&sx1_irda_device,
};
/*-----------------------------------------*/
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_LCD, &sx1_lcd_config },
};
/*-----------------------------------------*/
@ -391,8 +387,6 @@ static void __init omap_sx1_init(void)
platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
omap_board_config = sx1_config;
omap_board_config_size = ARRAY_SIZE(sx1_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap1_usb_init(&sx1_usb_config);
@ -406,6 +400,8 @@ static void __init omap_sx1_init(void)
gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
omapfb_set_lcd_config(&sx1_lcd_config);
}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")

22
arch/arm/plat-omap/fb.c
Просмотреть файл

@ -37,6 +37,7 @@
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static bool omapfb_lcd_configured;
static struct omapfb_platform_data omapfb_config;
static u64 omap_fb_dma_mask = ~(u32)0;
@ -52,16 +53,21 @@ static struct platform_device omap_fb_device = {
.num_resources = 0,
};
void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
{
omapfb_config.lcd = *config;
omapfb_lcd_configured = true;
}
static int __init omap_init_fb(void)
{
const struct omap_lcd_config *conf;
conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
if (conf == NULL)
/*
* If the board file has not set the lcd config with
* omapfb_set_lcd_config(), don't bother registering the omapfb device
*/
if (!omapfb_lcd_configured)
return 0;
omapfb_config.lcd = *conf;
return platform_device_register(&omap_fb_device);
}
@ -90,4 +96,8 @@ static int __init omap_init_fb(void)
arch_initcall(omap_init_fb);
#else
void __init omapfb_set_lcd_config(omap_lcd_config *config) { }
#endif

2
include/linux/omapfb.h
Просмотреть файл

@ -226,6 +226,8 @@ struct omapfb_platform_data {
struct omap_lcd_config lcd;
};
void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
#endif
#endif /* __OMAPFB_H */