soundwire: qcom: update register read/write routine

In the existing code every soundwire register read and register write
are kinda blocked. Each of these are using a special command id that
generates interrupt after it successfully finishes. This is really
overhead, limiting and not really necessary unless we are doing
something special.

We can simply read/write the fifo that should also give exactly
what we need! This will also allow to read/write registers in
interrupt context, which was not possible with the special
command approach.

With previous approach number of interrupts generated
after enumeration are around 130:
$ cat /proc/interrupts  | grep soundwire
 21: 130 0 0 0 0 0 0 0 GICv3 234 Edge      soundwire

after this patch they are just 3 interrupts
$ cat /proc/interrupts  | grep soundwire
 21: 3 0 0 0 0 0 0 0 GICv3 234 Edge      soundwire

This has significantly not only reduced interrupting CPU during enumeration
but also during streaming!

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210330144719.13284-6-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Srinivas Kandagatla 2021-03-30 15:47:15 +01:00 коммит произвёл Vinod Koul
Родитель a866a04902
Коммит ddea6cf7b6
1 изменённых файлов: 101 добавлений и 80 удалений

Просмотреть файл

@ -38,11 +38,13 @@
#define SWRM_CMD_FIFO_WR_CMD 0x300
#define SWRM_CMD_FIFO_RD_CMD 0x304
#define SWRM_CMD_FIFO_CMD 0x308
#define SWRM_CMD_FIFO_FLUSH 0x1
#define SWRM_CMD_FIFO_STATUS 0x30C
#define SWRM_CMD_FIFO_CFG_ADDR 0x314
#define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE BIT(31)
#define SWRM_RD_WR_CMD_RETRIES 0x7
#define SWRM_CMD_FIFO_RD_FIFO_ADDR 0x318
#define SWRM_RD_FIFO_CMD_ID_MASK GENMASK(11, 8)
#define SWRM_ENUMERATOR_CFG_ADDR 0x500
#define SWRM_MCP_FRAME_CTRL_BANK_ADDR(m) (0x101C + 0x40 * (m))
#define SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK GENMASK(2, 0)
@ -78,13 +80,16 @@
#define SWRM_SPECIAL_CMD_ID 0xF
#define MAX_FREQ_NUM 1
#define TIMEOUT_MS (2 * HZ)
#define QCOM_SWRM_MAX_RD_LEN 0xf
#define QCOM_SWRM_MAX_RD_LEN 0x1
#define QCOM_SDW_MAX_PORTS 14
#define DEFAULT_CLK_FREQ 9600000
#define SWRM_MAX_DAIS 0xF
#define SWR_INVALID_PARAM 0xFF
#define SWR_HSTOP_MAX_VAL 0xF
#define SWR_HSTART_MIN_VAL 0x0
#define SWR_BROADCAST_CMD_ID 0x0F
#define SWR_MAX_CMD_ID 14
#define MAX_FIFO_RD_RETRY 3
struct qcom_swrm_port_config {
u8 si;
@ -103,10 +108,8 @@ struct qcom_swrm_ctrl {
struct device *dev;
struct regmap *regmap;
void __iomem *mmio;
struct completion *comp;
struct completion broadcast;
struct work_struct slave_work;
/* read/write lock */
spinlock_t comp_lock;
/* Port alloc/free lock */
struct mutex port_lock;
struct clk *hclk;
@ -120,6 +123,8 @@ struct qcom_swrm_ctrl {
int rows_index;
unsigned long dout_port_mask;
unsigned long din_port_mask;
u8 rcmd_id;
u8 wcmd_id;
struct qcom_swrm_port_config pconfig[QCOM_SDW_MAX_PORTS];
struct sdw_stream_runtime *sruntime[SWRM_MAX_DAIS];
enum sdw_slave_status status[SDW_MAX_DEVICES];
@ -198,79 +203,108 @@ static int qcom_swrm_cpu_reg_write(struct qcom_swrm_ctrl *ctrl, int reg,
return SDW_CMD_OK;
}
static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data,
u8 dev_addr, u16 reg_addr)
static u32 swrm_get_packed_reg_val(u8 *cmd_id, u8 cmd_data,
u8 dev_addr, u16 reg_addr)
{
DECLARE_COMPLETION_ONSTACK(comp);
unsigned long flags;
u32 val;
int ret;
u8 id = *cmd_id;
spin_lock_irqsave(&ctrl->comp_lock, flags);
ctrl->comp = &comp;
spin_unlock_irqrestore(&ctrl->comp_lock, flags);
val = SWRM_REG_VAL_PACK(cmd_data, dev_addr,
SWRM_SPECIAL_CMD_ID, reg_addr);
ret = ctrl->reg_write(ctrl, SWRM_CMD_FIFO_WR_CMD, val);
if (ret)
goto err;
if (id != SWR_BROADCAST_CMD_ID) {
if (id < SWR_MAX_CMD_ID)
id += 1;
else
id = 0;
*cmd_id = id;
}
val = SWRM_REG_VAL_PACK(cmd_data, dev_addr, id, reg_addr);
ret = wait_for_completion_timeout(ctrl->comp,
msecs_to_jiffies(TIMEOUT_MS));
if (!ret)
ret = SDW_CMD_IGNORED;
else
ret = SDW_CMD_OK;
err:
spin_lock_irqsave(&ctrl->comp_lock, flags);
ctrl->comp = NULL;
spin_unlock_irqrestore(&ctrl->comp_lock, flags);
return ret;
return val;
}
static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl,
u8 dev_addr, u16 reg_addr,
u32 len, u8 *rval)
static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data,
u8 dev_addr, u16 reg_addr)
{
int i, ret;
u32 val;
DECLARE_COMPLETION_ONSTACK(comp);
unsigned long flags;
int ret = 0;
u8 cmd_id = 0x0;
spin_lock_irqsave(&ctrl->comp_lock, flags);
ctrl->comp = &comp;
spin_unlock_irqrestore(&ctrl->comp_lock, flags);
if (dev_addr == SDW_BROADCAST_DEV_NUM) {
cmd_id = SWR_BROADCAST_CMD_ID;
val = swrm_get_packed_reg_val(&cmd_id, cmd_data,
dev_addr, reg_addr);
} else {
val = swrm_get_packed_reg_val(&swrm->wcmd_id, cmd_data,
dev_addr, reg_addr);
}
val = SWRM_REG_VAL_PACK(len, dev_addr, SWRM_SPECIAL_CMD_ID, reg_addr);
ret = ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val);
if (ret)
goto err;
/* Its assumed that write is okay as we do not get any status back */
swrm->reg_write(swrm, SWRM_CMD_FIFO_WR_CMD, val);
ret = wait_for_completion_timeout(ctrl->comp,
msecs_to_jiffies(TIMEOUT_MS));
/* version 1.3 or less */
if (swrm->version <= 0x01030000)
usleep_range(150, 155);
if (cmd_id == SWR_BROADCAST_CMD_ID) {
/*
* sleep for 10ms for MSM soundwire variant to allow broadcast
* command to complete.
*/
ret = wait_for_completion_timeout(&swrm->broadcast,
msecs_to_jiffies(TIMEOUT_MS));
if (!ret)
ret = SDW_CMD_IGNORED;
else
ret = SDW_CMD_OK;
if (!ret) {
ret = SDW_CMD_IGNORED;
goto err;
} else {
ret = SDW_CMD_OK;
}
for (i = 0; i < len; i++) {
ctrl->reg_read(ctrl, SWRM_CMD_FIFO_RD_FIFO_ADDR, &val);
rval[i] = val & 0xFF;
}
err:
spin_lock_irqsave(&ctrl->comp_lock, flags);
ctrl->comp = NULL;
spin_unlock_irqrestore(&ctrl->comp_lock, flags);
return ret;
}
static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *swrm,
u8 dev_addr, u16 reg_addr,
u32 len, u8 *rval)
{
u32 cmd_data, cmd_id, val, retry_attempt = 0;
val = swrm_get_packed_reg_val(&swrm->rcmd_id, len, dev_addr, reg_addr);
/* wait for FIFO RD to complete to avoid overflow */
usleep_range(100, 105);
swrm->reg_write(swrm, SWRM_CMD_FIFO_RD_CMD, val);
/* wait for FIFO RD CMD complete to avoid overflow */
usleep_range(250, 255);
do {
swrm->reg_read(swrm, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data);
rval[0] = cmd_data & 0xFF;
cmd_id = FIELD_GET(SWRM_RD_FIFO_CMD_ID_MASK, cmd_data);
if (cmd_id != swrm->rcmd_id) {
if (retry_attempt < (MAX_FIFO_RD_RETRY - 1)) {
/* wait 500 us before retry on fifo read failure */
usleep_range(500, 505);
swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD,
SWRM_CMD_FIFO_FLUSH);
swrm->reg_write(swrm, SWRM_CMD_FIFO_RD_CMD, val);
}
retry_attempt++;
} else {
return SDW_CMD_OK;
}
} while (retry_attempt < MAX_FIFO_RD_RETRY);
dev_err(swrm->dev, "failed to read fifo: reg: 0x%x, rcmd_id: 0x%x,\
dev_num: 0x%x, cmd_data: 0x%x\n",
reg_addr, swrm->rcmd_id, dev_addr, cmd_data);
return SDW_CMD_IGNORED;
}
static void qcom_swrm_get_device_status(struct qcom_swrm_ctrl *ctrl)
{
u32 val;
@ -291,7 +325,6 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
{
struct qcom_swrm_ctrl *ctrl = dev_id;
u32 sts, value;
unsigned long flags;
ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &sts);
@ -304,8 +337,10 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
}
if ((sts & SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED) ||
sts & SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS)
schedule_work(&ctrl->slave_work);
sts & SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS) {
qcom_swrm_get_device_status(ctrl);
sdw_handle_slave_status(&ctrl->bus, ctrl->status);
}
/**
* clear the interrupt before complete() is called, as complete can
@ -314,15 +349,12 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
*/
ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, sts);
if (sts & SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED) {
spin_lock_irqsave(&ctrl->comp_lock, flags);
if (ctrl->comp)
complete(ctrl->comp);
spin_unlock_irqrestore(&ctrl->comp_lock, flags);
}
if (sts & SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED)
complete(&ctrl->broadcast);
return IRQ_HANDLED;
}
static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
{
u32 val;
@ -562,16 +594,6 @@ static u32 qcom_swrm_freq_tbl[MAX_FREQ_NUM] = {
DEFAULT_CLK_FREQ,
};
static void qcom_swrm_slave_wq(struct work_struct *work)
{
struct qcom_swrm_ctrl *ctrl =
container_of(work, struct qcom_swrm_ctrl, slave_work);
qcom_swrm_get_device_status(ctrl);
sdw_handle_slave_status(&ctrl->bus, ctrl->status);
}
static void qcom_swrm_stream_free_ports(struct qcom_swrm_ctrl *ctrl,
struct sdw_stream_runtime *stream)
{
@ -930,9 +952,8 @@ static int qcom_swrm_probe(struct platform_device *pdev)
ctrl->dev = dev;
dev_set_drvdata(&pdev->dev, ctrl);
spin_lock_init(&ctrl->comp_lock);
mutex_init(&ctrl->port_lock);
INIT_WORK(&ctrl->slave_work, qcom_swrm_slave_wq);
init_completion(&ctrl->broadcast);
ctrl->bus.ops = &qcom_swrm_ops;
ctrl->bus.port_ops = &qcom_swrm_port_ops;