microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'merge' into next 

Merge "merge" branch to bring in various bug fixes that are
going into 3.8
This commit is contained in:
Benjamin Herrenschmidt 2013-01-29 11:33:37 +11:00
Родитель b9818c3312 689dfa894c
Коммит dfd0436ad0
710 изменённых файлов: 13309 добавлений и 4053 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

5
Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
Просмотреть файл

@ -81,7 +81,8 @@ PA31 TXD4
Required properties for pin configuration node:
- atmel,pins: 4 integers array, represents a group of pins mux and config
setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
The PERIPH 0 means gpio.
The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
Bits used for CONFIG:
PULL_UP (1 << 0): indicate this pin need a pull up.
@ -126,7 +127,7 @@ pinctrl@fffff400 {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<1 14 0x1 0x0 /* PB14 periph A */
1 15 0x1 0x1>; /* PB15 periph with pullup */
1 15 0x1 0x1>; /* PB15 periph A with pullup */
};
};
};

18
Documentation/filesystems/f2fs.txt
Просмотреть файл

@ -175,9 +175,9 @@ consists of multiple segments as described below.
align with the zone size <-|
|-> align with the segment size
_________________________________________________________________________
| | | Node | Segment | Segment | |
| Superblock | Checkpoint | Address | Info. | Summary | Main |
| (SB) | (CP) | Table (NAT) | Table (SIT) | Area (SSA) | |
| | | Segment | Node | Segment | |
| Superblock | Checkpoint | Info. | Address | Summary | Main |
| (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | |
|____________|_____2______|______N______|______N______|______N_____|__N___|
. .
. .
@ -200,14 +200,14 @@ consists of multiple segments as described below.
: It contains file system information, bitmaps for valid NAT/SIT sets, orphan
inode lists, and summary entries of current active segments.
- Node Address Table (NAT)
: It is composed of a block address table for all the node blocks stored in
Main area.
- Segment Information Table (SIT)
: It contains segment information such as valid block count and bitmap for the
validity of all the blocks.
- Node Address Table (NAT)
: It is composed of a block address table for all the node blocks stored in
Main area.
- Segment Summary Area (SSA)
: It contains summary entries which contains the owner information of all the
data and node blocks stored in Main area.
@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
valid, as shown as below.
+--------+----------+---------+
| CP | NAT | SIT |
| CP | SIT | NAT |
+--------+----------+---------+
. . . .
. . . .
. . . .
+-------+-------+--------+--------+--------+--------+
| CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
| CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
+-------+-------+--------+--------+--------+--------+
| ^ ^
| | |

48
MAINTAINERS
Просмотреть файл

@ -228,7 +228,7 @@ S: Maintained
F: drivers/platform/x86/acerhdf.c
ACER WMI LAPTOP EXTRAS
M: Joey Lee <jlee@novell.com>
M: "Lee, Chun-Yi" <jlee@suse.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/acer-wmi.c
@ -648,7 +648,7 @@ F: arch/arm/
ARM SUB-ARCHITECTURES
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: MAINTAINED
S: Maintained
F: arch/arm/mach-*/
F: arch/arm/plat-*/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
@ -1351,6 +1351,14 @@ W: http://wireless.kernel.org/en/users/Drivers/ath9k
S: Supported
F: drivers/net/wireless/ath/ath9k/
WILOCITY WIL6210 WIRELESS DRIVER
M: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
L: linux-wireless@vger.kernel.org
L: wil6210@qca.qualcomm.com
S: Supported
W: http://wireless.kernel.org/en/users/Drivers/wil6210
F: drivers/net/wireless/ath/wil6210/
CARL9170 LINUX COMMUNITY WIRELESS DRIVER
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
@ -1964,9 +1972,9 @@ S: Maintained
F: drivers/usb/host/ohci-ep93xx.c
CIRRUS LOGIC CS4270 SOUND DRIVER
M: Timur Tabi <timur@freescale.com>
M: Timur Tabi <timur@tabi.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
S: Odd Fixes
F: sound/soc/codecs/cs4270*
CLEANCACHE API
@ -2958,7 +2966,7 @@ S: Maintained
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
@ -3183,9 +3191,9 @@ F: include/uapi/video/
F: include/uapi/linux/fb.h
FREESCALE DIU FRAMEBUFFER DRIVER
M: Timur Tabi <timur@freescale.com>
M: Timur Tabi <timur@tabi.org>
L: linux-fbdev@vger.kernel.org
S: Supported
S: Maintained
F: drivers/video/fsl-diu-fb.*
FREESCALE DMA DRIVER
@ -3220,9 +3228,8 @@ F: drivers/net/ethernet/freescale/fs_enet/
F: include/linux/fs_enet_pd.h
FREESCALE QUICC ENGINE LIBRARY
M: Timur Tabi <timur@freescale.com>
L: linuxppc-dev@lists.ozlabs.org
S: Supported
S: Orphan
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
@ -3241,16 +3248,16 @@ S: Maintained
F: drivers/net/ethernet/freescale/ucc_geth*
FREESCALE QUICC ENGINE UCC UART DRIVER
M: Timur Tabi <timur@freescale.com>
M: Timur Tabi <timur@tabi.org>
L: linuxppc-dev@lists.ozlabs.org
S: Supported
S: Maintained
F: drivers/tty/serial/ucc_uart.c
FREESCALE SOC SOUND DRIVERS
M: Timur Tabi <timur@freescale.com>
M: Timur Tabi <timur@tabi.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@lists.ozlabs.org
S: Supported
S: Maintained
F: sound/soc/fsl/fsl*
F: sound/soc/fsl/mpc8610_hpcd.c
@ -4898,7 +4905,7 @@ S: Maintained
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
M: Mirko Lindner <mlindner@marvell.com>
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
@ -5077,7 +5084,7 @@ S: Maintained
F: drivers/media/radio/radio-mr800.c
MSI LAPTOP SUPPORT
M: "Lee, Chun-Yi" <jlee@novell.com>
M: "Lee, Chun-Yi" <jlee@suse.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/msi-laptop.c
@ -5173,7 +5180,7 @@ S: Supported
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
@ -5507,8 +5514,7 @@ M: Benoît Cousson <b-cousson@ti.com>
M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod.c
F: arch/arm/plat-omap/include/plat/omap_hwmod.h
F: arch/arm/mach-omap2/omap_hwmod.*
OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
M: Benoît Cousson <b-cousson@ti.com>
@ -6579,7 +6585,7 @@ F: drivers/media/platform/s3c-camif/
F: include/media/s3c_camif.h
SERIAL DRIVERS
M: Alan Cox <alan@linux.intel.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial
@ -7334,7 +7340,7 @@ S: Odd Fixes
F: drivers/staging/speakup/
STAGING - TI DSP BRIDGE DRIVERS
M: Omar Ramirez Luna <omar.ramirez@ti.com>
M: Omar Ramirez Luna <omar.ramirez@copitl.com>
S: Odd Fixes
F: drivers/staging/tidspbridge/
@ -8526,7 +8532,7 @@ F: Documentation/x86/
F: arch/x86/
X86 PLATFORM DRIVERS
M: Matthew Garrett <mjg@redhat.com>
M: Matthew Garrett <matthew.garrett@nebula.com>
L: platform-driver-x86@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
S: Maintained

4
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc5
NAME = Terrified Chipmunk
# *DOCUMENTATION*
@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/sh[234].*/sh/ )
-e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------

1
arch/arm/boot/dts/Makefile
Просмотреть файл

@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
targets += dtbs
targets += $(dtb-y)
endif
# *.dtb used to be generated in the directory above. Clean out the

2
arch/arm/boot/dts/armada-370-db.dts
Просмотреть файл

@ -26,7 +26,7 @@
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {

14
arch/arm/boot/dts/armada-xp-mv78230.dtsi
Просмотреть файл

@ -50,27 +50,25 @@
};
gpio0: gpio@d0018100 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018100 0x40>,
<0xd0018800 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <16>, <17>, <18>, <19>;
interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018140 0x40>,
<0xd0018840 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018140 0x40>;
ngpios = <17>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <20>, <21>, <22>;
interrupts = <87>, <88>, <89>;
};
};
};

21
arch/arm/boot/dts/armada-xp-mv78260.dtsi
Просмотреть файл

@ -51,39 +51,36 @@
};
gpio0: gpio@d0018100 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018100 0x40>,
<0xd0018800 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <16>, <17>, <18>, <19>;
interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018140 0x40>,
<0xd0018840 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <20>, <21>, <22>, <23>;
interrupts = <87>, <88>, <89>, <90>;
};
gpio2: gpio@d0018180 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018180 0x40>,
<0xd0018870 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <24>;
interrupts = <91>;
};
ethernet@d0034000 {

21
arch/arm/boot/dts/armada-xp-mv78460.dtsi
Просмотреть файл

@ -66,39 +66,36 @@
};
gpio0: gpio@d0018100 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018100 0x40>,
<0xd0018800 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <16>, <17>, <18>, <19>;
interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018140 0x40>,
<0xd0018840 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <20>, <21>, <22>, <23>;
interrupts = <87>, <88>, <89>, <90>;
};
gpio2: gpio@d0018180 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018180 0x40>,
<0xd0018870 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <24>;
interrupts = <91>;
};
ethernet@d0034000 {

4
arch/arm/boot/dts/at91rm9200.dtsi
Просмотреть файл

@ -336,8 +336,8 @@
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 23 0 /* sda */
&pioA 24 0 /* scl */
gpios = <&pioA 25 0 /* sda */
&pioA 26 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;

18
arch/arm/boot/dts/at91sam9260.dtsi
Просмотреть файл

@ -306,6 +306,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<1 16 0x1 0x0 /* PB16 periph A */
1 17 0x1 0x0 /* PB17 periph A */
1 18 0x1 0x0>; /* PB18 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<1 19 0x1 0x0 /* PB19 periph A */
1 20 0x1 0x0 /* PB20 periph A */
1 21 0x1 0x0>; /* PB21 periph A */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -450,6 +466,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffbc000 0x4000>;
interrupts = <14 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};

36
arch/arm/boot/dts/at91sam9263.dtsi
Просмотреть файл

@ -271,6 +271,38 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<1 0 0x2 0x0 /* PB0 periph B */
1 1 0x2 0x0 /* PB1 periph B */
1 2 0x2 0x0>; /* PB2 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<1 3 0x2 0x0 /* PB3 periph B */
1 4 0x2 0x0 /* PB4 periph B */
1 5 0x2 0x0>; /* PB5 periph B */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<1 6 0x1 0x0 /* PB6 periph A */
1 7 0x1 0x0 /* PB7 periph A */
1 8 0x1 0x0>; /* PB8 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<1 9 0x1 0x0 /* PB9 periph A */
1 10 0x1 0x0 /* PB10 periph A */
1 11 0x1 0x0>; /* PB11 periph A */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@ -368,6 +400,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>;
interrupts = <16 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
@ -375,6 +409,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <17 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};

36
arch/arm/boot/dts/at91sam9g45.dtsi
Просмотреть файл

@ -290,6 +290,38 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<3 0 0x1 0x0 /* PD0 periph A */
3 1 0x1 0x0 /* PD1 periph A */
3 2 0x1 0x0>; /* PD2 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<3 3 0x1 0x0 /* PD3 periph A */
3 4 0x1 0x0 /* PD4 periph A */
3 5 0x1 0x0>; /* PD5 periph A */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<3 10 0x1 0x0 /* PD10 periph A */
3 11 0x1 0x0 /* PD11 periph A */
3 12 0x1 0x0>; /* PD12 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<3 13 0x1 0x0 /* PD13 periph A */
3 14 0x1 0x0 /* PD14 periph A */
3 15 0x1 0x0>; /* PD15 periph A */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@ -425,6 +457,8 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <16 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
@ -432,6 +466,8 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>;
interrupts = <17 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};

26
arch/arm/boot/dts/at91sam9n12.dtsi
Просмотреть файл

@ -28,6 +28,7 @@
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
ssc0 = &ssc0;
};
cpus {
cpu@0 {
@ -244,6 +245,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<0 24 0x2 0x0 /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0>; /* PA26 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<0 27 0x2 0x0 /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -294,6 +311,15 @@
status = "disabled";
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;

92
arch/arm/boot/dts/at91sam9x5.dtsi
Просмотреть файл

@ -88,13 +88,6 @@
interrupts = <1 4 7>;
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
status = "disabled";
};
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
@ -150,6 +143,11 @@
atmel,pins =
<0 3 0x1 0x0>; /* PA3 periph A */
};
pinctrl_usart0_sck: usart0_sck-0 {
atmel,pins =
<0 4 0x1 0x0>; /* PA4 periph A */
};
};
usart1 {
@ -161,12 +159,17 @@
pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins =
<3 27 0x3 0x0>; /* PC27 periph C */
<2 27 0x3 0x0>; /* PC27 periph C */
};
pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins =
<3 28 0x3 0x0>; /* PC28 periph C */
<2 28 0x3 0x0>; /* PC28 periph C */
};
pinctrl_usart1_sck: usart1_sck-0 {
atmel,pins =
<2 28 0x3 0x0>; /* PC29 periph C */
};
};
@ -179,46 +182,56 @@
pinctrl_uart2_rts: uart2_rts-0 {
atmel,pins =
<0 0 0x2 0x0>; /* PB0 periph B */
<1 0 0x2 0x0>; /* PB0 periph B */
};
pinctrl_uart2_cts: uart2_cts-0 {
atmel,pins =
<0 1 0x2 0x0>; /* PB1 periph B */
<1 1 0x2 0x0>; /* PB1 periph B */
};
pinctrl_usart2_sck: usart2_sck-0 {
atmel,pins =
<1 2 0x2 0x0>; /* PB2 periph B */
};
};
usart3 {
pinctrl_uart3: usart3-0 {
atmel,pins =
<3 23 0x2 0x1 /* PC22 periph B with pullup */
3 23 0x2 0x0>; /* PC23 periph B */
<2 23 0x2 0x1 /* PC22 periph B with pullup */
2 23 0x2 0x0>; /* PC23 periph B */
};
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<3 24 0x2 0x0>; /* PC24 periph B */
<2 24 0x2 0x0>; /* PC24 periph B */
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<3 25 0x2 0x0>; /* PC25 periph B */
<2 25 0x2 0x0>; /* PC25 periph B */
};
pinctrl_usart3_sck: usart3_sck-0 {
atmel,pins =
<2 26 0x2 0x0>; /* PC26 periph B */
};
};
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
<3 8 0x3 0x0 /* PC8 periph C */
3 9 0x3 0x1>; /* PC9 periph C with pullup */
<2 8 0x3 0x0 /* PC8 periph C */
2 9 0x3 0x1>; /* PC9 periph C with pullup */
};
};
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
<3 16 0x3 0x0 /* PC16 periph C */
3 17 0x3 0x1>; /* PC17 periph C with pullup */
<2 16 0x3 0x0 /* PC16 periph C */
2 17 0x3 0x1>; /* PC17 periph C with pullup */
};
};
@ -247,14 +260,14 @@
pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
atmel,pins =
<1 8 0x1 0x0 /* PA8 periph A */
1 11 0x1 0x0 /* PA11 periph A */
1 12 0x1 0x0 /* PA12 periph A */
1 13 0x1 0x0 /* PA13 periph A */
1 14 0x1 0x0 /* PA14 periph A */
1 15 0x1 0x0 /* PA15 periph A */
1 16 0x1 0x0 /* PA16 periph A */
1 17 0x1 0x0>; /* PA17 periph A */
<1 8 0x1 0x0 /* PB8 periph A */
1 11 0x1 0x0 /* PB11 periph A */
1 12 0x1 0x0 /* PB12 periph A */
1 13 0x1 0x0 /* PB13 periph A */
1 14 0x1 0x0 /* PB14 periph A */
1 15 0x1 0x0 /* PB15 periph A */
1 16 0x1 0x0 /* PB16 periph A */
1 17 0x1 0x0>; /* PB17 periph A */
};
};
@ -290,6 +303,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<0 24 0x2 0x0 /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0>; /* PA26 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<0 27 0x2 0x0 /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -333,6 +362,15 @@
};
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
mmc0: mmc@f0008000 {
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;

12
arch/arm/boot/dts/cros5250-common.dtsi
Просмотреть файл

@ -96,8 +96,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
@ -120,8 +120,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
@ -141,8 +141,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;

14
arch/arm/boot/dts/dove-cubox.dts
Просмотреть файл

@ -26,10 +26,15 @@
};
&uart0 { status = "okay"; };
&sdio0 { status = "okay"; };
&sata0 { status = "okay"; };
&i2c0 { status = "okay"; };
&sdio0 {
status = "okay";
/* sdio0 card detect is connected to wrong pin on CuBox */
cd-gpios = <&gpio0 12 1>;
};
&spi0 {
status = "okay";
@ -42,9 +47,14 @@
};
&pinctrl {
pinctrl-0 = <&pmx_gpio_18>;
pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
pinctrl-names = "default";
pmx_gpio_12: pmx-gpio-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_gpio_18: pmx-gpio-18 {
marvell,pins = "mpp18";
marvell,function = "gpio";

8
arch/arm/boot/dts/exynos5250-smdk5250.dts
Просмотреть файл

@ -115,8 +115,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
@ -139,8 +139,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;

16
arch/arm/boot/dts/kirkwood-ns2-common.dtsi
Просмотреть файл

@ -1,4 +1,5 @@
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
chosen {
@ -6,6 +7,21 @@
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
&pmx_ns2_sata0 &pmx_ns2_sata1>;
pinctrl-names = "default";
pmx_ns2_sata0: pmx-ns2-sata0 {
marvell,pins = "mpp21";
marvell,function = "sata0";
};
pmx_ns2_sata1: pmx-ns2-sata1 {
marvell,pins = "mpp20";
marvell,function = "sata1";
};
};
serial@12000 {
clock-frequency = <166666667>;
status = "okay";

2
arch/arm/boot/dts/kirkwood.dtsi
Просмотреть файл

@ -36,6 +36,7 @@
reg = <0x10100 0x40>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
};
@ -46,6 +47,7 @@
reg = <0x10140 0x40>;
ngpios = <18>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
};

2
arch/arm/boot/dts/kizbox.dts
Просмотреть файл

@ -48,6 +48,8 @@
macb0: ethernet@fffc4000 {
phy-mode = "mii";
pinctrl-0 = <&pinctrl_macb_rmii
&pinctrl_macb_rmii_mii_alt>;
status = "okay";
};

6
arch/arm/boot/dts/sunxi.dtsi
Просмотреть файл

@ -60,19 +60,21 @@
};
uart0: uart@01c28000 {
compatible = "ns8250";
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
status = "disabled";
};
uart1: uart@01c28400 {
compatible = "ns8250";
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
status = "disabled";
};

2
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
Просмотреть файл

@ -45,7 +45,6 @@
reg = <1>;
};
/* A7s disabled till big.LITTLE patches are available...
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@ -63,7 +62,6 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
};
*/
};
memory@80000000 {

3
arch/arm/configs/at91_dt_defconfig
Просмотреть файл

@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
CONFIG_SOC_AT91SAM9263=y
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set

2
arch/arm/kernel/debug.S
Просмотреть файл

@ -100,12 +100,14 @@ ENTRY(printch)
b 1b
ENDPROC(printch)
#ifdef CONFIG_MMU
ENTRY(debug_ll_addr)
addruart r2, r3, ip
str r2, [r0]
str r3, [r1]
mov pc, lr
ENDPROC(debug_ll_addr)
#endif
#else

5
arch/arm/kernel/head.S
Просмотреть файл

@ -246,6 +246,7 @@ __create_page_tables:
/*
* Then map boot params address in r2 if specified.
* We map 2 sections in case the ATAGs/DTB crosses a section boundary.
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
@ -253,6 +254,8 @@ __create_page_tables:
addne r3, r3, #PAGE_OFFSET
addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
orrne r6, r7, r0
strne r6, [r3], #1 << PMD_ORDER
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
#ifdef CONFIG_DEBUG_LL
@ -331,7 +334,7 @@ ENTRY(secondary_startup)
* as it has already been validated by the primary processor.
*/
#ifdef CONFIG_ARM_VIRT_EXT
bl __hyp_stub_install
bl __hyp_stub_install_secondary
#endif
safe_svcmode_maskall r9

18
arch/arm/kernel/hyp-stub.S
Просмотреть файл

@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary)
* immediately.
*/
compare_cpu_mode_with_primary r4, r5, r6, r7
bxne lr
movne pc, lr
/*
* Once we have given up on one CPU, we do not try to install the
@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary)
*/
cmp r4, #HYP_MODE
bxne lr @ give up if the CPU is not in HYP mode
movne pc, lr @ give up if the CPU is not in HYP mode
/*
* Configure HSCTLR to set correct exception endianness/instruction set
@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary)
* Eventually, CPU-specific code might be needed -- assume not for now
*
* This code relies on the "eret" instruction to synchronize the
* various coprocessor accesses.
* various coprocessor accesses. This is done when we switch to SVC
* (see safe_svcmode_maskall).
*/
@ Now install the hypervisor stub:
adr r7, __hyp_stub_vectors
@ -155,14 +156,7 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE
1:
#endif
bic r7, r4, #MODE_MASK
orr r7, r7, #SVC_MODE
THUMB( orr r7, r7, #PSR_T_BIT )
msr spsr_cxsf, r7 @ This is SPSR_hyp.
__MSR_ELR_HYP(14) @ msr elr_hyp, lr
__ERET @ return, switching to SVC mode
@ The boot CPU mode is left in r4.
bx lr @ The boot CPU mode is left in r4.
ENDPROC(__hyp_stub_install_secondary)
__hyp_stub_do_trap:
@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors)
@ fall through
ENTRY(__hyp_set_vectors)
__HVC(0)
bx lr
mov pc, lr
ENDPROC(__hyp_set_vectors)
#ifndef ZIMAGE

2
arch/arm/mach-at91/setup.c
Просмотреть файл

@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
at91_boot_soc = at91rm9200_soc;
break;

1
arch/arm/mach-imx/Kconfig
Просмотреть файл

@ -851,6 +851,7 @@ config SOC_IMX6Q
select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select PINCTRL

6
arch/arm/mach-imx/clk-imx25.c
Просмотреть файл

@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");

6
arch/arm/mach-imx/clk-imx27.c
Просмотреть файл

@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");

6
arch/arm/mach-imx/clk-imx31.c
Просмотреть файл

@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
/* i.mx31 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");

6
arch/arm/mach-imx/clk-imx35.c
Просмотреть файл

@ -251,9 +251,9 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");

6
arch/arm/mach-imx/clk-imx51-imx53.c
Просмотреть файл

@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");

3
arch/arm/mach-imx/clk-imx6q.c
Просмотреть файл

@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);

1
arch/arm/mach-imx/common.h
Просмотреть файл

@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_clock_map_io(void);
extern void imx_cpu_die(unsigned int cpu);
extern int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);

1
arch/arm/mach-imx/devices/devices-common.h
Просмотреть файл

@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};

15
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
Просмотреть файл

@ -11,35 +11,36 @@
#include "../hardware.h"
#include "devices-common.h"
#define imx_fsl_usb2_udc_data_entry_single(soc) \
#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX25);
imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27);
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX31);
imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX35);
imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX51);
imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
#endif
struct platform_device *__init imx_add_fsl_usb2_udc(
@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}

2
arch/arm/mach-imx/devices/platform-imx-fb.c
Просмотреть файл

@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("imx-fb", 0,
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}

12
arch/arm/mach-imx/hotplug.c
Просмотреть файл

@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
/* spin here until hardware takes it down */
while (1)
;
cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
{
imx_enable_cpu(cpu, false);
return 1;
}

3
arch/arm/mach-imx/iram_alloc.c
Просмотреть файл

@ -22,8 +22,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/genalloc.h>
#include "iram.h"
#include "linux/platform_data/imx-iram.h"
static unsigned long iram_phys_base;
static void __iomem *iram_virt_base;

1
arch/arm/mach-imx/platsmp.c
Просмотреть файл

@ -92,5 +92,6 @@ struct smp_operations imx_smp_ops __initdata = {
.smp_boot_secondary = imx_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = imx_cpu_die,
.cpu_kill = imx_cpu_kill,
#endif
};

1
arch/arm/mach-imx/pm-imx6q.c
Просмотреть файл

@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
cpu_suspend(0, imx6q_suspend_finish);
imx_smp_prepare();
imx_gpc_post_resume();
imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
return -EINVAL;

14
arch/arm/mach-integrator/pci_v3.c
Просмотреть файл

@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
if (!ap_syscon_base)
return -EINVAL;
if (nr == 0) {
sys->mem_offset = PHYS_PCI_MEM_BASE;
ret = pci_v3_setup_resources(sys);
/* Remap the Integrator system controller */
ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
if (!ap_syscon_base)
return -EINVAL;
}
return ret;
@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
unsigned int temp;
int ret;
/* Remap the Integrator system controller */
ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
if (!ap_syscon_base) {
pr_err("unable to remap the AP syscon for PCIv3\n");
return;
}
pcibios_min_mem = 0x00100000;
/*

38
arch/arm/mach-kirkwood/board-ns2.c
Просмотреть файл

@ -18,47 +18,11 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data ns2_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static unsigned int ns2_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP7_GPO, /* Fan speed (bit 1) */
MPP8_TW0_SDA,
MPP9_TW0_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_GPO, /* Red led */
MPP14_GPIO, /* USB fuse */
MPP16_GPIO, /* SATA 0 power */
MPP17_GPIO, /* SATA 1 power */
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_SATA1_ACTn,
MPP21_SATA0_ACTn,
MPP22_GPIO, /* Fan speed (bit 0) */
MPP23_GPIO, /* Fan power */
MPP24_GPIO, /* USB mode select */
MPP25_GPIO, /* Fan rotation fail */
MPP26_GPIO, /* USB device vbus */
MPP28_GPIO, /* USB enable host vbus */
MPP29_GPIO, /* Blue led (slow register) */
MPP30_GPIO, /* Blue led (command register) */
MPP31_GPIO, /* Board power off */
MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
MPP33_GPO, /* Fan speed (bit 2) */
0
};
#define NS2_GPIO_POWER_OFF 31
static void ns2_power_off(void)
@ -71,8 +35,6 @@ void __init ns2_init(void)
/*
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(ns2_mpp_config);
if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);

2
arch/arm/mach-mvebu/Makefile
Просмотреть файл

@ -1,6 +1,8 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-orion/include
AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o

6
arch/arm/mach-omap2/board-omap4panda.c
Просмотреть файл

@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PULL_ENA),
OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
/* UART2 - BT/FM/GPS shared transport */
OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};

2
arch/arm/mach-omap2/cclock2420_data.c
Просмотреть файл

@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
omap2xxx_clkt_vps_late_init();
omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,

2
arch/arm/mach-omap2/cclock2430_data.c
Просмотреть файл

@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
omap2xxx_clkt_vps_late_init();
omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,

13
arch/arm/mach-omap2/cclock44xx_data.c
Просмотреть файл

@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
* On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
* state when turning the ABE clock domain. Workaround this by
* locking the ABE DPLL on boot.
* Lock the ABE DPLL in any case to avoid issues with audio.
*/
if (cpu_is_omap446x()) {
rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
if (!rc)
rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
}
rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
if (!rc)
rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
return 0;
}

2
arch/arm/mach-omap2/devices.c
Просмотреть файл

@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
return cnt;
}
static void omap_init_ocp2scp(void)
static void __init omap_init_ocp2scp(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;

3
arch/arm/mach-omap2/drm.c
Просмотреть файл

@ -25,6 +25,7 @@
#include <linux/dma-mapping.h>
#include <linux/platform_data/omap_drm.h>
#include "soc.h"
#include "omap_device.h"
#include "omap_hwmod.h"
@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
oh->name);
}
platform_data.omaprev = GET_OMAP_REVISION();
platform_data.omaprev = GET_OMAP_TYPE;
return platform_device_register(&omap_drm_device);

6
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
Просмотреть файл

@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
* currently reset very early during boot, before I2C is
* available, so it doesn't seem that we have any choice in
* the kernel other than to avoid resetting it.
*
* Also, McPDM needs to be configured to NO_IDLE mode when it
* is in used otherwise vital clocks will be gated which
* results 'slow motion' audio playback.
*/
.flags = HWMOD_EXT_OPT_MAIN_CLK,
.flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_mcpdm_irqs,
.sdma_reqs = omap44xx_mcpdm_sdma_reqs,
.main_clk = "mcpdm_fck",

8
arch/arm/mach-omap2/timer.c
Просмотреть файл

@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
struct device_node *np;
for_each_matching_node(np, match) {
if (!of_device_is_available(np)) {
of_node_put(np);
if (!of_device_is_available(np))
continue;
}
if (property && !of_get_property(np, property, NULL)) {
of_node_put(np);
if (property && !of_get_property(np, property, NULL))
continue;
}
of_add_property(np, &device_disabled);
return np;

3
arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
Просмотреть файл

@ -463,6 +463,9 @@
GPIO76_LCD_PCLK, \
GPIO77_LCD_BIAS
/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
extern int keypad_set_wake(unsigned int on);
#endif /* __ASM_ARCH_MFP_PXA27X_H */

4
arch/arm/mach-pxa/pxa27x.c
Просмотреть файл

@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void)
EXPORT_SYMBOL(pxa27x_clear_otgph);
static unsigned long ac97_reset_config[] = {
GPIO113_GPIO,
GPIO113_AC97_nRESET_GPIO_HIGH,
GPIO113_AC97_nRESET,
GPIO95_GPIO,
GPIO95_AC97_nRESET_GPIO_HIGH,
GPIO95_AC97_nRESET,
};

2
arch/arm/mach-s3c64xx/mach-crag6410-module.c
Просмотреть файл

@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = {
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
.irq = S3C_EINT(5),
.irq = S3C_EINT(4),
.controller_data = &wm0010_spi_csinfo,
.platform_data = &wm0010_pdata,
},

2
arch/arm/mach-s3c64xx/pm.c
Просмотреть файл

@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void)
for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
#ifdef CONFIG_S3C_DEV_FB
if (dev_get_platdata(&s3c_device_fb.dev))
pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
#endif
return 0;
}

18
arch/arm/mm/dma-mapping.c
Просмотреть файл

@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
size_t size, enum dma_data_direction dir,
void (*op)(const void *, size_t, int))
{
unsigned long pfn;
size_t left = size;
pfn = page_to_pfn(page) + offset / PAGE_SIZE;
offset %= PAGE_SIZE;
/*
* A single sg entry may refer to multiple physically contiguous
* pages. But we still need to process highmem pages individually.
* If highmem is not configured then the bulk of this loop gets
* optimized out.
*/
size_t left = size;
do {
size_t len = left;
void *vaddr;
page = pfn_to_page(pfn);
if (PageHighMem(page)) {
if (len + offset > PAGE_SIZE) {
if (offset >= PAGE_SIZE) {
page += offset / PAGE_SIZE;
offset %= PAGE_SIZE;
}
if (len + offset > PAGE_SIZE)
len = PAGE_SIZE - offset;
}
vaddr = kmap_high_get(page);
if (vaddr) {
vaddr += offset;
@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
op(vaddr, len, dir);
}
offset = 0;
page++;
pfn++;
left -= len;
} while (left);
}

2
arch/arm/mm/mmu.c
Просмотреть файл

@ -283,7 +283,7 @@ static struct mem_type mem_types[] = {
},
[MT_MEMORY_SO] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_MT_UNCACHED,
L_PTE_MT_UNCACHED | L_PTE_XN,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
PMD_SECT_UNCACHED | PMD_SECT_XN,

2
arch/arm/plat-versatile/headsmp.S
Просмотреть файл

@ -20,7 +20,7 @@
*/
ENTRY(versatile_secondary_startup)
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
bic r0, #0xff000000
adr r4, 1f
ldmia r4, {r5, r6}
sub r4, r4, r5

6
arch/arm/vfp/entry.S
Просмотреть файл

@ -22,7 +22,7 @@
@ IRQs disabled.
@
ENTRY(do_vfp)
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
add r11, r4, #1 @ increment it
str r11, [r10, #TI_PREEMPT]
@ -35,7 +35,7 @@ ENTRY(do_vfp)
ENDPROC(do_vfp)
ENTRY(vfp_null_entry)
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
sub r11, r4, #1 @ decrement it
@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry)
__INIT
ENTRY(vfp_testing_entry)
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
sub r11, r4, #1 @ decrement it

4
arch/arm/vfp/vfphw.S
Просмотреть файл

@ -168,7 +168,7 @@ vfp_hw_state_valid:
@ else it's one 32-bit instruction, so
@ always subtract 4 from the following
@ instruction address.
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
sub r11, r4, #1 @ decrement it
@ -192,7 +192,7 @@ look_for_VFP_exceptions:
@ not recognised by VFP
DBGSTR "not VFP"
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
sub r11, r4, #1 @ decrement it

1
arch/arm64/boot/dts/Makefile
Просмотреть файл

@ -1,4 +1,5 @@
targets += dtbs
targets += $(dtb-y)
dtbs: $(addprefix $(obj)/, $(dtb-y))

5
arch/arm64/include/asm/elf.h
Просмотреть файл

@ -26,7 +26,10 @@
typedef unsigned long elf_greg_t;
#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t))
#define ELF_CORE_COPY_REGS(dest, regs) \
*(struct user_pt_regs *)&(dest) = (regs)->user_regs;
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef struct user_fpsimd_state elf_fpregset_t;

36
arch/arm64/include/asm/pgtable.h
Просмотреть файл

@ -24,7 +24,8 @@
/*
* Software defined PTE bits definition.
*/
#define PTE_VALID (_AT(pteval_t, 1) << 0) /* pte_present() check */
#define PTE_VALID (_AT(pteval_t, 1) << 0)
#define PTE_PROT_NONE (_AT(pteval_t, 1) << 1) /* only when !PTE_VALID */
#define PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !pte_present() */
#define PTE_DIRTY (_AT(pteval_t, 1) << 55)
#define PTE_SPECIAL (_AT(pteval_t, 1) << 56)
@ -60,9 +61,12 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
extern pgprot_t pgprot_default;
#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
#define __pgprot_modify(prot,mask,bits) \
__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
#define _MOD_PROT(p, b) __pgprot_modify(p, 0, b)
#define PAGE_NONE __pgprot_modify(pgprot_default, PTE_TYPE_MASK, PTE_PROT_NONE)
#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN)
#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
@ -72,7 +76,7 @@ extern pgprot_t pgprot_default;
#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY)
#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY)
#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
#define __PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE)
#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
@ -125,16 +129,15 @@ extern struct page *empty_zero_page;
/*
* The following only work if pte_present(). Undefined behaviour otherwise.
*/
#define pte_present(pte) (pte_val(pte) & PTE_VALID)
#define pte_present(pte) (pte_val(pte) & (PTE_VALID | PTE_PROT_NONE))
#define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY)
#define pte_young(pte) (pte_val(pte) & PTE_AF)
#define pte_special(pte) (pte_val(pte) & PTE_SPECIAL)
#define pte_write(pte) (!(pte_val(pte) & PTE_RDONLY))
#define pte_exec(pte) (!(pte_val(pte) & PTE_UXN))
#define pte_present_exec_user(pte) \
((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
(PTE_VALID | PTE_USER))
#define pte_valid_user(pte) \
((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@ -157,10 +160,13 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
if (pte_present_exec_user(pte))
__sync_icache_dcache(pte, addr);
if (!pte_dirty(pte))
pte = pte_wrprotect(pte);
if (pte_valid_user(pte)) {
if (pte_exec(pte))
__sync_icache_dcache(pte, addr);
if (!pte_dirty(pte))
pte = pte_wrprotect(pte);
}
set_pte(ptep, pte);
}
@ -170,9 +176,6 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
#define pte_huge(pte) ((pte_val(pte) & PTE_TYPE_MASK) == PTE_TYPE_HUGEPAGE)
#define pte_mkhuge(pte) (__pte((pte_val(pte) & ~PTE_TYPE_MASK) | PTE_TYPE_HUGEPAGE))
#define __pgprot_modify(prot,mask,bits) \
__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
#define __HAVE_ARCH_PTE_SPECIAL
/*
@ -264,7 +267,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY;
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
PTE_PROT_NONE | PTE_VALID;
pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
return pte;
}

7
arch/arm64/include/asm/unistd32.h
Просмотреть файл

@ -395,8 +395,13 @@ __SYSCALL(370, sys_name_to_handle_at)
__SYSCALL(371, compat_sys_open_by_handle_at)
__SYSCALL(372, compat_sys_clock_adjtime)
__SYSCALL(373, sys_syncfs)
__SYSCALL(374, compat_sys_sendmmsg)
__SYSCALL(375, sys_setns)
__SYSCALL(376, compat_sys_process_vm_readv)
__SYSCALL(377, compat_sys_process_vm_writev)
__SYSCALL(378, sys_ni_syscall) /* 378 for kcmp */
#define __NR_compat_syscalls 374
#define __NR_compat_syscalls 379
/*
* Compat syscall numbers used by the AArch64 kernel.

4
arch/arm64/kernel/vdso.c
Просмотреть файл

@ -252,10 +252,6 @@ void update_vsyscall(struct timekeeper *tk)
void update_vsyscall_tz(void)
{
++vdso_data->tb_seq_count;
smp_wmb();
vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
vdso_data->tz_dsttime = sys_tz.tz_dsttime;
smp_wmb();
++vdso_data->tb_seq_count;
}

2
arch/arm64/kernel/vdso/gettimeofday.S
Просмотреть файл

@ -73,8 +73,6 @@ ENTRY(__kernel_gettimeofday)
/* If tz is NULL, return 0. */
cbz x1, 3f
ldp w4, w5, [vdso_data, #VDSO_TZ_MINWEST]
seqcnt_read w9
seqcnt_check w9, 1b
stp w4, w5, [x1, #TZ_MINWEST]
3:
mov x0, xzr

27
arch/ia64/kernel/ptrace.c
Просмотреть файл

@ -672,33 +672,6 @@ ptrace_attach_sync_user_rbs (struct task_struct *child)
read_unlock(&tasklist_lock);
}
static inline int
thread_matches (struct task_struct *thread, unsigned long addr)
{
unsigned long thread_rbs_end;
struct pt_regs *thread_regs;
if (ptrace_check_attach(thread, 0) < 0)
/*
* If the thread is not in an attachable state, we'll
* ignore it. The net effect is that if ADDR happens
* to overlap with the portion of the thread's
* register backing store that is currently residing
* on the thread's kernel stack, then ptrace() may end
* up accessing a stale value. But if the thread
* isn't stopped, that's a problem anyhow, so we're
* doing as well as we can...
*/
return 0;
thread_regs = task_pt_regs(thread);
thread_rbs_end = ia64_get_user_rbs_end(thread, thread_regs, NULL);
if (!on_kernel_rbs(addr, thread_regs->ar_bspstore, thread_rbs_end))
return 0;
return 1; /* looks like we've got a winner */
}
/*
* Write f32-f127 back to task->thread.fph if it has been modified.
*/

16
arch/m68k/include/asm/dma-mapping.h
Просмотреть файл

@ -21,6 +21,22 @@ extern void *dma_alloc_coherent(struct device *, size_t,
extern void dma_free_coherent(struct device *, size_t,
void *, dma_addr_t);
static inline void *dma_alloc_attrs(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag,
struct dma_attrs *attrs)
{
/* attrs is not supported and ignored */
return dma_alloc_coherent(dev, size, dma_handle, flag);
}
static inline void dma_free_attrs(struct device *dev, size_t size,
void *cpu_addr, dma_addr_t dma_handle,
struct dma_attrs *attrs)
{
/* attrs is not supported and ignored */
dma_free_coherent(dev, size, cpu_addr, dma_handle);
}
static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t flag)
{

2
arch/m68k/include/asm/pgtable_no.h
Просмотреть файл

@ -64,6 +64,8 @@ extern unsigned int kobjsize(const void *objp);
*/
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
#define KMAP_START 0
#define KMAP_END 0xffffffff
#include <asm-generic/pgtable.h>

2
arch/m68k/include/asm/unistd.h
Просмотреть файл

@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
#define NR_syscalls 348
#define NR_syscalls 349
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT

1
arch/m68k/include/uapi/asm/unistd.h
Просмотреть файл

@ -353,5 +353,6 @@
#define __NR_process_vm_readv 345
#define __NR_process_vm_writev 346
#define __NR_kcmp 347
#define __NR_finit_module 348
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */

1
arch/m68k/kernel/syscalltable.S
Просмотреть файл

@ -368,4 +368,5 @@ ENTRY(sys_call_table)
.long sys_process_vm_readv /* 345 */
.long sys_process_vm_writev
.long sys_kcmp
.long sys_finit_module

8
arch/m68k/mm/init.c
Просмотреть файл

@ -39,6 +39,11 @@
void *empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);
#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
extern void init_pointer_table(unsigned long ptable);
extern pmd_t *zero_pgtable;
#endif
#ifdef CONFIG_MMU
pg_data_t pg_data_map[MAX_NUMNODES];
@ -69,9 +74,6 @@ void __init m68k_setup_node(int node)
node_set_online(node);
}
extern void init_pointer_table(unsigned long ptable);
extern pmd_t *zero_pgtable;
#else /* CONFIG_MMU */
/*

1
arch/mn10300/Kconfig
Просмотреть файл

@ -6,6 +6,7 @@ config MN10300
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_KGDB
select GENERIC_ATOMIC64
select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA

20
arch/parisc/kernel/entry.S
Просмотреть файл

@ -1865,7 +1865,7 @@ syscall_restore:
/* Are we being ptraced? */
ldw TASK_FLAGS(%r1),%r19
ldi (_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2
ldi _TIF_SYSCALL_TRACE_MASK,%r2
and,COND(=) %r19,%r2,%r0
b,n syscall_restore_rfi
@ -1978,15 +1978,23 @@ syscall_restore_rfi:
/* sr2 should be set to zero for userspace syscalls */
STREG %r0,TASK_PT_SR2(%r1)
pt_regs_ok:
LDREG TASK_PT_GR31(%r1),%r2
depi 3,31,2,%r2 /* ensure return to user mode. */
STREG %r2,TASK_PT_IAOQ0(%r1)
depi 3,31,2,%r2 /* ensure return to user mode. */
STREG %r2,TASK_PT_IAOQ0(%r1)
ldo 4(%r2),%r2
STREG %r2,TASK_PT_IAOQ1(%r1)
copy %r25,%r16
b intr_restore
nop
copy %r25,%r16
pt_regs_ok:
LDREG TASK_PT_IAOQ0(%r1),%r2
depi 3,31,2,%r2 /* ensure return to user mode. */
STREG %r2,TASK_PT_IAOQ0(%r1)
LDREG TASK_PT_IAOQ1(%r1),%r2
depi 3,31,2,%r2
STREG %r2,TASK_PT_IAOQ1(%r1)
b intr_restore
copy %r25,%r16
.import schedule,code
syscall_do_resched:

6
arch/parisc/kernel/irq.c
Просмотреть файл

@ -410,11 +410,13 @@ void __init init_IRQ(void)
{
local_irq_disable(); /* PARANOID - should already be disabled */
mtctl(~0UL, 23); /* EIRR : clear all pending external intr */
claim_cpu_irqs();
#ifdef CONFIG_SMP
if (!cpu_eiem)
if (!cpu_eiem) {
claim_cpu_irqs();
cpu_eiem = EIEM_MASK(IPI_IRQ) | EIEM_MASK(TIMER_IRQ);
}
#else
claim_cpu_irqs();
cpu_eiem = EIEM_MASK(TIMER_IRQ);
#endif
set_eiem(cpu_eiem); /* EIEM : enable all external intr */

2
arch/parisc/kernel/ptrace.c
Просмотреть файл

@ -26,7 +26,7 @@
#include <asm/asm-offsets.h>
/* PSW bits we allow the debugger to modify */
#define USER_PSW_BITS (PSW_N | PSW_V | PSW_CB)
#define USER_PSW_BITS (PSW_N | PSW_B | PSW_V | PSW_CB)
/*
* Called by kernel/ptrace.c when detaching..

4
arch/parisc/kernel/signal.c
Просмотреть файл

@ -190,8 +190,10 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n",
(unsigned long)ka, sp, frame_size);
/* Align alternate stack and reserve 64 bytes for the signal
handler's frame marker. */
if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
sp = current->sas_ss_sp; /* Stacks grow up! */
sp = (current->sas_ss_sp + 0x7f) & ~0x3f; /* Stacks grow up! */
DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp);
return (void __user *) sp; /* Stacks grow up. Fun. */

11
arch/parisc/math-emu/cnv_float.h
Просмотреть файл

@ -347,16 +347,15 @@
Sgl_isinexact_to_fix(sgl_value,exponent)
#define Duint_from_sgl_mantissa(sgl_value,exponent,dresultA,dresultB) \
{Sall(sgl_value) <<= SGL_EXP_LENGTH; /* left-justify */ \
{unsigned int val = Sall(sgl_value) << SGL_EXP_LENGTH; \
if (exponent <= 31) { \
Dintp1(dresultA) = 0; \
Dintp2(dresultB) = (unsigned)Sall(sgl_value) >> (31 - exponent); \
Dintp1(dresultA) = 0; \
Dintp2(dresultB) = val >> (31 - exponent); \
} \
else { \
Dintp1(dresultA) = Sall(sgl_value) >> (63 - exponent); \
Dintp2(dresultB) = Sall(sgl_value) << (exponent - 31); \
Dintp1(dresultA) = val >> (63 - exponent); \
Dintp2(dresultB) = exponent <= 62 ? val << (exponent - 31) : 0; \
} \
Sall(sgl_value) >>= SGL_EXP_LENGTH; /* return to original */ \
}
#define Duint_setzero(dresultA,dresultB) \

2
arch/powerpc/include/uapi/asm/kvm_para.h
Просмотреть файл

@ -78,7 +78,7 @@ struct kvm_vcpu_arch_shared {
#define KVM_HCALL_TOKEN(num) _EV_HCALL_TOKEN(EV_KVM_VENDOR_ID, num)
#include <uapi/asm/epapr_hcalls.h>
#include <asm/epapr_hcalls.h>
#define KVM_FEATURE_MAGIC_PAGE 1

13
arch/powerpc/kernel/entry_64.S
Просмотреть файл

@ -667,6 +667,19 @@ resume_kernel:
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
/*
* arch_local_irq_restore() from preempt_schedule_irq above may
* enable hard interrupt but we really should disable interrupts
* when we return from the interrupt, and so that we don't get
* interrupted after loading SRR0/1.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq

5
arch/powerpc/kernel/kgdb.c
Просмотреть файл

@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
static int kgdb_singlestep(struct pt_regs *regs)
{
struct thread_info *thread_info, *exception_thread_info;
struct thread_info *backup_current_thread_info = \
(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
struct thread_info *backup_current_thread_info;
if (user_mode(regs))
return 0;
backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
/*
* On Book E and perhaps other processors, singlestep is handled on
* the critical exception stack. This causes current_thread_info()
@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
/* Restore current_thread_info lastly. */
memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
kfree(backup_current_thread_info);
return 1;
}

9
arch/powerpc/kernel/time.c
Просмотреть файл

@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs)
set_dec(DECREMENTER_MAX);
/* Some implementations of hotplug will get timer interrupts while
* offline, just ignore these
* offline, just ignore these and we also need to set
* decrementers_next_tb as MAX to make sure __check_irq_replay
* don't replay timer interrupt when return, otherwise we'll trap
* here infinitely :(
*/
if (!cpu_online(smp_processor_id()))
if (!cpu_online(smp_processor_id())) {
*next_tb = ~(u64)0;
return;
}
/* Conditionally hard-enable interrupts now that the DEC has been
* bumped to its maximum value

4
arch/powerpc/kvm/book3s_hv_ras.c
Просмотреть файл

@ -79,7 +79,9 @@ static void flush_tlb_power7(struct kvm_vcpu *vcpu)
static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu)
{
unsigned long srr1 = vcpu->arch.shregs.msr;
#ifdef CONFIG_PPC_POWERNV
struct opal_machine_check_event *opal_evt;
#endif
long handled = 1;
if (srr1 & SRR1_MC_LDSTERR) {
@ -117,6 +119,7 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu)
handled = 0;
}
#ifdef CONFIG_PPC_POWERNV
/*
* See if OPAL has already handled the condition.
* We assume that if the condition is recovered then OPAL
@ -131,6 +134,7 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu)
if (handled)
opal_evt->in_use = 0;
#endif
return handled;
}

2
arch/powerpc/kvm/emulate.c
Просмотреть файл

@ -39,6 +39,7 @@
#define OP_31_XOP_TRAP 4
#define OP_31_XOP_LWZX 23
#define OP_31_XOP_TRAP_64 68
#define OP_31_XOP_DCBF 86
#define OP_31_XOP_LBZX 87
#define OP_31_XOP_STWX 151
#define OP_31_XOP_STBX 215
@ -374,6 +375,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
emulated = kvmppc_emulate_mtspr(vcpu, sprn, rs);
break;
case OP_31_XOP_DCBF:
case OP_31_XOP_DCBI:
/* Do nothing. The guest is performing dcbi because
* hardware DMA is not snooped by the dcache, but

2
arch/powerpc/oprofile/op_model_power4.c
Просмотреть файл

@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1)
for (pmc = 0; pmc < 4; pmc++) {
psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
<< (OPROFILE_MAX_PMC_NUM - pmc)
* OPROFILE_MAX_PMC_NUM);
* OPROFILE_PMSEL_FIELD_WIDTH);
psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
* OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
unit = mmcr1 & (OPROFILE_PM_UNIT_MSK

7
arch/powerpc/platforms/pasemi/cpufreq.c
Просмотреть файл

@ -236,6 +236,13 @@ out:
static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
/*
* We don't support CPU hotplug. Don't unmap after the system
* has already made it to a running state.
*/
if (system_state != SYSTEM_BOOTING)
return 0;
if (sdcasr_mapbase)
iounmap(sdcasr_mapbase);
if (sdcpwr_mapbase)

4
arch/s390/Makefile
Просмотреть файл

@ -24,8 +24,8 @@ CHECKFLAGS += -D__s390__ -msize-long
else
LD_BFD := elf64-s390
LDFLAGS := -m elf64_s390
KBUILD_AFLAGS_MODULE += -fpic -D__PIC__
KBUILD_CFLAGS_MODULE += -fpic -D__PIC__
KBUILD_AFLAGS_MODULE += -fPIC
KBUILD_CFLAGS_MODULE += -fPIC
KBUILD_CFLAGS += -m64
KBUILD_AFLAGS += -m64
UTS_MACHINE := s390x

6
arch/s390/include/asm/dma.h
Просмотреть файл

@ -10,4 +10,10 @@
*/
#define MAX_DMA_ADDRESS 0x80000000
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
#define isa_dma_bridge_buggy (0)
#endif
#endif /* _ASM_S390_DMA_H */

5
arch/s390/include/asm/io.h
Просмотреть файл

@ -85,6 +85,11 @@ static inline void iounmap(volatile void __iomem *addr)
#define __raw_writel zpci_write_u32
#define __raw_writeq zpci_write_u64
#define readb_relaxed readb
#define readw_relaxed readw
#define readl_relaxed readl
#define readq_relaxed readq
#endif /* CONFIG_PCI */
#include <asm-generic/io.h>

80
arch/s390/include/asm/irq.h
Просмотреть файл

@ -2,43 +2,61 @@
#define _ASM_IRQ_H
#include <linux/hardirq.h>
#include <linux/percpu.h>
#include <linux/cache.h>
#include <linux/types.h>
enum interruption_class {
enum interruption_main_class {
EXTERNAL_INTERRUPT,
IO_INTERRUPT,
EXTINT_CLK,
EXTINT_EXC,
EXTINT_EMS,
EXTINT_TMR,
EXTINT_TLA,
EXTINT_PFL,
EXTINT_DSD,
EXTINT_VRT,
EXTINT_SCP,
EXTINT_IUC,
EXTINT_CMS,
EXTINT_CMC,
EXTINT_CMR,
IOINT_CIO,
IOINT_QAI,
IOINT_DAS,
IOINT_C15,
IOINT_C70,
IOINT_TAP,
IOINT_VMR,
IOINT_LCS,
IOINT_CLW,
IOINT_CTC,
IOINT_APB,
IOINT_ADM,
IOINT_CSC,
IOINT_PCI,
IOINT_MSI,
NMI_NMI,
NR_IRQS,
NR_IRQS
};
enum interruption_class {
IRQEXT_CLK,
IRQEXT_EXC,
IRQEXT_EMS,
IRQEXT_TMR,
IRQEXT_TLA,
IRQEXT_PFL,
IRQEXT_DSD,
IRQEXT_VRT,
IRQEXT_SCP,
IRQEXT_IUC,
IRQEXT_CMS,
IRQEXT_CMC,
IRQEXT_CMR,
IRQIO_CIO,
IRQIO_QAI,
IRQIO_DAS,
IRQIO_C15,
IRQIO_C70,
IRQIO_TAP,
IRQIO_VMR,
IRQIO_LCS,
IRQIO_CLW,
IRQIO_CTC,
IRQIO_APB,
IRQIO_ADM,
IRQIO_CSC,
IRQIO_PCI,
IRQIO_MSI,
NMI_NMI,
CPU_RST,
NR_ARCH_IRQS
};
struct irq_stat {
unsigned int irqs[NR_ARCH_IRQS];
};
DECLARE_PER_CPU_SHARED_ALIGNED(struct irq_stat, irq_stat);
static __always_inline void inc_irq_stat(enum interruption_class irq)
{
__get_cpu_var(irq_stat).irqs[irq]++;
}
struct ext_code {
unsigned short subcode;
unsigned short code;

5
arch/s390/include/asm/pgtable.h
Просмотреть файл

@ -1387,10 +1387,7 @@ static inline int has_transparent_hugepage(void)
static inline unsigned long pmd_pfn(pmd_t pmd)
{
if (pmd_trans_huge(pmd))
return pmd_val(pmd) >> HPAGE_SHIFT;
else
return pmd_val(pmd) >> PAGE_SHIFT;
return pmd_val(pmd) >> PAGE_SHIFT;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */

28
arch/s390/include/asm/timex.h
Просмотреть файл

@ -128,4 +128,32 @@ static inline unsigned long long get_clock_monotonic(void)
return get_clock_xt() - sched_clock_base_cc;
}
/**
* tod_to_ns - convert a TOD format value to nanoseconds
* @todval: to be converted TOD format value
* Returns: number of nanoseconds that correspond to the TOD format value
*
* Converting a 64 Bit TOD format value to nanoseconds means that the value
* must be divided by 4.096. In order to achieve that we multiply with 125
* and divide by 512:
*
* ns = (todval * 125) >> 9;
*
* In order to avoid an overflow with the multiplication we can rewrite this.
* With a split todval == 2^32 * th + tl (th upper 32 bits, tl lower 32 bits)
* we end up with
*
* ns = ((2^32 * th + tl) * 125 ) >> 9;
* -> ns = (2^23 * th * 125) + ((tl * 125) >> 9);
*
*/
static inline unsigned long long tod_to_ns(unsigned long long todval)
{
unsigned long long ns;
ns = ((todval >> 32) << 23) * 125;
ns += ((todval & 0xffffffff) * 125) >> 9;
return ns;
}
#endif

3
arch/s390/include/uapi/asm/unistd.h
Просмотреть файл

@ -279,7 +279,8 @@
#define __NR_process_vm_writev 341
#define __NR_s390_runtime_instr 342
#define __NR_kcmp 343
#define NR_syscalls 344
#define __NR_finit_module 344
#define NR_syscalls 345
/*
* There are some system calls that are not present on 64 bit, some

6
arch/s390/kernel/compat_wrapper.S
Просмотреть файл

@ -1659,3 +1659,9 @@ ENTRY(sys_kcmp_wrapper)
llgfr %r5,%r5 # unsigned long
llgfr %r6,%r6 # unsigned long
jg sys_kcmp
ENTRY(sys_finit_module_wrapper)
lgfr %r2,%r2 # int
llgtr %r3,%r3 # const char __user *
lgfr %r4,%r4 # int
jg sys_finit_module

11
arch/s390/kernel/debug.c
Просмотреть файл

@ -1127,13 +1127,14 @@ debug_register_view(debug_info_t * id, struct debug_view *view)
if (i == DEBUG_MAX_VIEWS) {
pr_err("Registering view %s/%s would exceed the maximum "
"number of views %i\n", id->name, view->name, i);
debugfs_remove(pde);
rc = -1;
} else {
id->views[i] = view;
id->debugfs_entries[i] = pde;
}
spin_unlock_irqrestore(&id->lock, flags);
if (rc)
debugfs_remove(pde);
out:
return rc;
}
@ -1146,9 +1147,9 @@ EXPORT_SYMBOL(debug_register_view);
int
debug_unregister_view(debug_info_t * id, struct debug_view *view)
{
int rc = 0;
int i;
struct dentry *dentry = NULL;
unsigned long flags;
int i, rc = 0;
if (!id)
goto out;
@ -1160,10 +1161,12 @@ debug_unregister_view(debug_info_t * id, struct debug_view *view)
if (i == DEBUG_MAX_VIEWS)
rc = -1;
else {
debugfs_remove(id->debugfs_entries[i]);
dentry = id->debugfs_entries[i];
id->views[i] = NULL;
id->debugfs_entries[i] = NULL;
}
spin_unlock_irqrestore(&id->lock, flags);
debugfs_remove(dentry);
out:
return rc;
}

124
arch/s390/kernel/irq.c
Просмотреть файл

@ -24,43 +24,65 @@
#include <asm/irq.h>
#include "entry.h"
DEFINE_PER_CPU_SHARED_ALIGNED(struct irq_stat, irq_stat);
EXPORT_PER_CPU_SYMBOL_GPL(irq_stat);
struct irq_class {
char *name;
char *desc;
};
static const struct irq_class intrclass_names[] = {
/*
* The list of "main" irq classes on s390. This is the list of interrrupts
* that appear both in /proc/stat ("intr" line) and /proc/interrupts.
* Historically only external and I/O interrupts have been part of /proc/stat.
* We can't add the split external and I/O sub classes since the first field
* in the "intr" line in /proc/stat is supposed to be the sum of all other
* fields.
* Since the external and I/O interrupt fields are already sums we would end
* up with having a sum which accounts each interrupt twice.
*/
static const struct irq_class irqclass_main_desc[NR_IRQS] = {
[EXTERNAL_INTERRUPT] = {.name = "EXT"},
[IO_INTERRUPT] = {.name = "I/O"},
[EXTINT_CLK] = {.name = "CLK", .desc = "[EXT] Clock Comparator"},
[EXTINT_EXC] = {.name = "EXC", .desc = "[EXT] External Call"},
[EXTINT_EMS] = {.name = "EMS", .desc = "[EXT] Emergency Signal"},
[EXTINT_TMR] = {.name = "TMR", .desc = "[EXT] CPU Timer"},
[EXTINT_TLA] = {.name = "TAL", .desc = "[EXT] Timing Alert"},
[EXTINT_PFL] = {.name = "PFL", .desc = "[EXT] Pseudo Page Fault"},
[EXTINT_DSD] = {.name = "DSD", .desc = "[EXT] DASD Diag"},
[EXTINT_VRT] = {.name = "VRT", .desc = "[EXT] Virtio"},
[EXTINT_SCP] = {.name = "SCP", .desc = "[EXT] Service Call"},
[EXTINT_IUC] = {.name = "IUC", .desc = "[EXT] IUCV"},
[EXTINT_CMS] = {.name = "CMS", .desc = "[EXT] CPU-Measurement: Sampling"},
[EXTINT_CMC] = {.name = "CMC", .desc = "[EXT] CPU-Measurement: Counter"},
[EXTINT_CMR] = {.name = "CMR", .desc = "[EXT] CPU-Measurement: RI"},
[IOINT_CIO] = {.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt"},
[IOINT_QAI] = {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt"},
[IOINT_DAS] = {.name = "DAS", .desc = "[I/O] DASD"},
[IOINT_C15] = {.name = "C15", .desc = "[I/O] 3215"},
[IOINT_C70] = {.name = "C70", .desc = "[I/O] 3270"},
[IOINT_TAP] = {.name = "TAP", .desc = "[I/O] Tape"},
[IOINT_VMR] = {.name = "VMR", .desc = "[I/O] Unit Record Devices"},
[IOINT_LCS] = {.name = "LCS", .desc = "[I/O] LCS"},
[IOINT_CLW] = {.name = "CLW", .desc = "[I/O] CLAW"},
[IOINT_CTC] = {.name = "CTC", .desc = "[I/O] CTC"},
[IOINT_APB] = {.name = "APB", .desc = "[I/O] AP Bus"},
[IOINT_ADM] = {.name = "ADM", .desc = "[I/O] EADM Subchannel"},
[IOINT_CSC] = {.name = "CSC", .desc = "[I/O] CHSC Subchannel"},
[IOINT_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" },
[IOINT_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" },
[IO_INTERRUPT] = {.name = "I/O"}
};
/*
* The list of split external and I/O interrupts that appear only in
* /proc/interrupts.
* In addition this list contains non external / I/O events like NMIs.
*/
static const struct irq_class irqclass_sub_desc[NR_ARCH_IRQS] = {
[IRQEXT_CLK] = {.name = "CLK", .desc = "[EXT] Clock Comparator"},
[IRQEXT_EXC] = {.name = "EXC", .desc = "[EXT] External Call"},
[IRQEXT_EMS] = {.name = "EMS", .desc = "[EXT] Emergency Signal"},
[IRQEXT_TMR] = {.name = "TMR", .desc = "[EXT] CPU Timer"},
[IRQEXT_TLA] = {.name = "TAL", .desc = "[EXT] Timing Alert"},
[IRQEXT_PFL] = {.name = "PFL", .desc = "[EXT] Pseudo Page Fault"},
[IRQEXT_DSD] = {.name = "DSD", .desc = "[EXT] DASD Diag"},
[IRQEXT_VRT] = {.name = "VRT", .desc = "[EXT] Virtio"},
[IRQEXT_SCP] = {.name = "SCP", .desc = "[EXT] Service Call"},
[IRQEXT_IUC] = {.name = "IUC", .desc = "[EXT] IUCV"},
[IRQEXT_CMS] = {.name = "CMS", .desc = "[EXT] CPU-Measurement: Sampling"},
[IRQEXT_CMC] = {.name = "CMC", .desc = "[EXT] CPU-Measurement: Counter"},
[IRQEXT_CMR] = {.name = "CMR", .desc = "[EXT] CPU-Measurement: RI"},
[IRQIO_CIO] = {.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt"},
[IRQIO_QAI] = {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt"},
[IRQIO_DAS] = {.name = "DAS", .desc = "[I/O] DASD"},
[IRQIO_C15] = {.name = "C15", .desc = "[I/O] 3215"},
[IRQIO_C70] = {.name = "C70", .desc = "[I/O] 3270"},
[IRQIO_TAP] = {.name = "TAP", .desc = "[I/O] Tape"},
[IRQIO_VMR] = {.name = "VMR", .desc = "[I/O] Unit Record Devices"},
[IRQIO_LCS] = {.name = "LCS", .desc = "[I/O] LCS"},
[IRQIO_CLW] = {.name = "CLW", .desc = "[I/O] CLAW"},
[IRQIO_CTC] = {.name = "CTC", .desc = "[I/O] CTC"},
[IRQIO_APB] = {.name = "APB", .desc = "[I/O] AP Bus"},
[IRQIO_ADM] = {.name = "ADM", .desc = "[I/O] EADM Subchannel"},
[IRQIO_CSC] = {.name = "CSC", .desc = "[I/O] CHSC Subchannel"},
[IRQIO_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" },
[IRQIO_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" },
[NMI_NMI] = {.name = "NMI", .desc = "[NMI] Machine Check"},
[CPU_RST] = {.name = "RST", .desc = "[CPU] CPU Restart"},
};
/*
@ -68,30 +90,34 @@ static const struct irq_class intrclass_names[] = {
*/
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
int irq = *(loff_t *) v;
int cpu;
get_online_cpus();
if (i == 0) {
if (irq == 0) {
seq_puts(p, " ");
for_each_online_cpu(j)
seq_printf(p, "CPU%d ",j);
for_each_online_cpu(cpu)
seq_printf(p, "CPU%d ", cpu);
seq_putc(p, '\n');
}
if (i < NR_IRQS) {
seq_printf(p, "%s: ", intrclass_names[i].name);
#ifndef CONFIG_SMP
seq_printf(p, "%10u ", kstat_irqs(i));
#else
for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
#endif
if (intrclass_names[i].desc)
seq_printf(p, " %s", intrclass_names[i].desc);
seq_putc(p, '\n');
}
if (irq < NR_IRQS) {
seq_printf(p, "%s: ", irqclass_main_desc[irq].name);
for_each_online_cpu(cpu)
seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[irq]);
seq_putc(p, '\n');
goto skip_arch_irqs;
}
for (irq = 0; irq < NR_ARCH_IRQS; irq++) {
seq_printf(p, "%s: ", irqclass_sub_desc[irq].name);
for_each_online_cpu(cpu)
seq_printf(p, "%10u ", per_cpu(irq_stat, cpu).irqs[irq]);
if (irqclass_sub_desc[irq].desc)
seq_printf(p, " %s", irqclass_sub_desc[irq].desc);
seq_putc(p, '\n');
}
skip_arch_irqs:
put_online_cpus();
return 0;
return 0;
}
/*
@ -222,7 +248,7 @@ void __irq_entry do_extint(struct pt_regs *regs, struct ext_code ext_code,
/* Serve timer interrupts first. */
clock_comparator_work();
}
kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
kstat_incr_irqs_this_cpu(EXTERNAL_INTERRUPT, NULL);
if (ext_code.code != 0x1004)
__get_cpu_var(s390_idle).nohz_delay = 1;

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше