ARM: socfpga: Repair incorrectly applied MCV patch

For whatever reason, this patch was not applied verbatim and had all
tabs replaced with spaces. Replace them back by a quick sed.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alan Tull <atull@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
This commit is contained in:
Marek Vasut 2015-12-17 23:38:18 +00:00 коммит произвёл Dinh Nguyen
Родитель 34a315883f
Коммит dfd35b779d
2 изменённых файлов: 54 добавлений и 54 удалений

Просмотреть файл

@ -18,16 +18,16 @@
#include "socfpga_cyclone5.dtsi"
/ {
model = "DENX MCV";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
model = "DENX MCV";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
memory {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1 GiB */
};
memory {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1 GiB */
};
};
&mmc0 { /* On-SoM eMMC */
bus-width = <8>;
&mmc0 { /* On-SoM eMMC */
bus-width = <8>;
};

Просмотреть файл

@ -18,77 +18,77 @@
#include "socfpga_cyclone5_mcv.dtsi"
/ {
model = "DENX MCV EVK";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
model = "DENX MCV EVK";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
aliases {
ethernet0 = &gmac0;
stmpe-i2c0 = &stmpe1;
};
aliases {
ethernet0 = &gmac0;
stmpe-i2c0 = &stmpe1;
};
chosen {
stdout-path = "serial0:115200n8";
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&can0 {
status = "okay";
status = "okay";
};
&can1 {
status = "okay";
status = "okay";
};
&gmac0 {
phy-mode = "rgmii";
status = "okay";
phy-mode = "rgmii";
status = "okay";
};
&gpio0 { /* GPIO 0 ... 28 */
status = "okay";
&gpio0 { /* GPIO 0 ... 28 */
status = "okay";
};
&gpio1 { /* GPIO 29 ... 57 */
status = "okay";
&gpio1 { /* GPIO 29 ... 57 */
status = "okay";
};
&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
status = "okay";
&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
status = "okay";
};
&i2c0 {
status = "okay";
speed-mode = <0>;
status = "okay";
speed-mode = <0>;
stmpe1: stmpe811@41 {
compatible = "st,stmpe811";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x41>;
id = <0>;
blocks = <0x5>;
irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
stmpe1: stmpe811@41 {
compatible = "st,stmpe811";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x41>;
id = <0>;
blocks = <0x5>;
irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
stmpe_touchscreen {
compatible = "st,stmpe-ts";
reg = <0>;
ts,sample-time = <4>;
ts,mod-12b = <1>;
ts,ref-sel = <0>;
ts,adc-freq = <1>;
ts,ave-ctrl = <1>;
ts,touch-det-delay = <3>;
ts,settling = <4>;
ts,fraction-z = <7>;
ts,i-drive = <1>;
};
};
stmpe_touchscreen {
compatible = "st,stmpe-ts";
reg = <0>;
ts,sample-time = <4>;
ts,mod-12b = <1>;
ts,ref-sel = <0>;
ts,adc-freq = <1>;
ts,ave-ctrl = <1>;
ts,touch-det-delay = <3>;
ts,settling = <4>;
ts,fraction-z = <7>;
ts,i-drive = <1>;
};
};
};
&uart0 {
status = "okay";
status = "okay";
};
&usb1 {
status = "okay";
status = "okay";
};