net: phy: realtek: Replace phy functions with non-locked version in rtl8211e_config_init()

After calling phy_select_page() and until calling phy_restore_page(),
the mutex 'mdio_lock' is already locked, so the driver should use
non-locked version of phy functions. Or there will be a deadlock with
'mdio_lock'.

This replaces phy functions called from rtl8211e_config_init() to avoid
the deadlock issue.

Fixes: f81dadbcf7 ("net: phy: realtek: Add rtl8211e rx/tx delays config")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/realtek.c

@@ -217,12 +217,12 @@ static int rtl8211e_config_init(struct phy_device *phydev)
 	if (oldpage < 0)
 		goto err_restore_page;
 
-	ret = phy_write(phydev, RTL821x_EXT_PAGE_SELECT, 0xa4);
+	ret = __phy_write(phydev, RTL821x_EXT_PAGE_SELECT, 0xa4);
 	if (ret)
 		goto err_restore_page;
 
-	ret = phy_modify(phydev, 0x1c, RTL8211E_TX_DELAY | RTL8211E_RX_DELAY,
-			 val);
+	ret = __phy_modify(phydev, 0x1c, RTL8211E_TX_DELAY | RTL8211E_RX_DELAY,
+			   val);
 
 err_restore_page:
 	return phy_restore_page(phydev, oldpage, ret);