[media] drxk: Convert an #ifdef logic as a new config parameter

Instead of using #ifdef I2C_LONG_ADR for some devices, convert
it into a parameter. Terratec H5 logs from the original driver
seems to need this mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/frontends/drxk.h

@@ -6,6 +6,7 @@
 
 struct drxk_config {
 	u8 adr;
+	u32 single_master : 1;
 };
 
 extern struct dvb_frontend *drxk_attach(const struct drxk_config *config,

drivers/media/dvb/frontends/drxk_hard.c

@@ -375,9 +375,10 @@ static int i2c_read(struct i2c_adapter *adap,
 static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags)
 {
 	u8 adr = state->demod_address, mm1[4], mm2[2], len;
-#ifdef I2C_LONG_ADR
+
+	if (state->single_master)
 		flags |= 0xC0;
-#endif
+
 	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
 		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
 		mm1[1] = ((reg >> 16) & 0xFF);
@@ -406,9 +407,10 @@ static int read16(struct drxk_state *state, u32 reg, u16 *data)
 static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags)
 {
 	u8 adr = state->demod_address, mm1[4], mm2[4], len;
-#ifdef I2C_LONG_ADR
+
+	if (state->single_master)
 		flags |= 0xC0;
-#endif
+
 	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
 		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
 		mm1[1] = ((reg >> 16) & 0xFF);
@@ -438,9 +440,9 @@ static int read32(struct drxk_state *state, u32 reg, u32 *data)
 static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags)
 {
 	u8 adr = state->demod_address, mm[6], len;
-#ifdef I2C_LONG_ADR
+
+	if (state->single_master)
 		flags |= 0xC0;
-#endif
 	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
 		mm[0] = (((reg << 1) & 0xFF) | 0x01);
 		mm[1] = ((reg >> 16) & 0xFF);
@@ -469,9 +471,9 @@ static int write16(struct drxk_state *state, u32 reg, u16 data)
 static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags)
 {
 	u8 adr = state->demod_address, mm[8], len;
-#ifdef I2C_LONG_ADR
+
+	if (state->single_master)
 		flags |= 0xC0;
-#endif
 	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
 		mm[0] = (((reg << 1) & 0xFF) | 0x01);
 		mm[1] = ((reg >> 16) & 0xFF);
@@ -503,9 +505,10 @@ static int write_block(struct drxk_state *state, u32 Address,
 {
 	int status = 0, BlkSize = BlockSize;
 	u8 Flags = 0;
-#ifdef I2C_LONG_ADR
+
+	if (state->single_master)
 		Flags |= 0xC0;
-#endif
+
 	while (BlkSize > 0) {
 		int Chunk = BlkSize > state->m_ChunkSize ?
 		    state->m_ChunkSize : BlkSize;
@@ -6355,6 +6358,7 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config,
 
 	state->i2c = i2c;
 	state->demod_address = adr;
+	state->single_master = config->single_master;
 
 	mutex_init(&state->mutex);
 	mutex_init(&state->ctlock);

drivers/media/dvb/frontends/drxk_hard.h

@@ -326,6 +326,11 @@ struct drxk_state {
 	u16               m_AntennaSwitchDVBTDVBC;
 
 	enum DRXPowerMode m_currentPowerMode;
+
+	/* Configurable parameters at the driver */
+
+	u32 single_master : 1;		/* Use single master i2c mode */
+
 };
 
 #define NEVER_LOCK 0