mdio: Add XENPAK LASI register definitions
These registers were originally defined for XENPAK modules, but are also implemented by many other 10G PHYs. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Родитель
f2a3e62620
Коммит
e0b221bf4e
|
@ -55,6 +55,14 @@
|
|||
#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
|
||||
#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
|
||||
|
||||
/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
|
||||
#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
|
||||
#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
|
||||
#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
|
||||
#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
|
||||
#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
|
||||
#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
|
||||
|
||||
/* Control register 1. */
|
||||
/* Enable extended speed selection */
|
||||
#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
|
||||
|
@ -218,6 +226,26 @@
|
|||
#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
|
||||
#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
|
||||
|
||||
/* LASI RX_ALARM control/status registers. */
|
||||
#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
|
||||
#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
|
||||
#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
|
||||
#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
|
||||
#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
|
||||
|
||||
/* LASI TX_ALARM control/status registers. */
|
||||
#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
|
||||
#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
|
||||
#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
|
||||
#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
|
||||
#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
|
||||
#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
|
||||
|
||||
/* LASI control/status registers. */
|
||||
#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
|
||||
#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
|
||||
#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
|
||||
|
||||
/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
|
||||
|
||||
#define MDIO_PHY_ID_C45 0x8000
|
||||
|
|
Загрузка…
Ссылка в новой задаче