ARM: dts: add initial Rex Pro board support
Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
This commit is contained in:
Robert Nelson
Shawn Guo
Родитель
18e8499b22
Коммит
e2047e33f2
|
|
@ -219,6 +219,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
|
|||
imx6q-gw54xx.dtb \
|
||||
imx6q-nitrogen6x.dtb \
|
||||
imx6q-phytec-pbab01.dtb \
|
||||
imx6q-rex-pro.dtb \
|
||||
imx6q-sabreauto.dtb \
|
||||
imx6q-sabrelite.dtb \
|
||||
imx6q-sabresd.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,34 @@
|
|||
/*
|
||||
* Copyright 2014 FEDEVEL, Inc.
|
||||
*
|
||||
* Author: Robert Nelson <robertcnelson@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "imx6q.dtsi"
|
||||
#include "imx6qdl-rex.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rex Pro i.MX6 Quad Board";
|
||||
compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi3 {
|
||||
flash: m25p80@0 {
|
||||
compatible = "sst,sst25vf032b";
|
||||
spi-max-frequency = <20000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,357 @@
|
|||
/*
|
||||
* Copyright 2014 FEDEVEL, Inc.
|
||||
*
|
||||
* Author: Robert Nelson <robertcnelson@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg_3p3v: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usbh1_vbus: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbh1>;
|
||||
regulator-name = "usbh1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_led>;
|
||||
|
||||
led0: usr {
|
||||
label = "usr";
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx6-rex-sgtl5000",
|
||||
"fsl,imx-audio-sgtl5000";
|
||||
model = "imx6-rex-sgtl5000";
|
||||
ssi-controller = <&ssi1>;
|
||||
audio-codec = <&codec>;
|
||||
audio-routing =
|
||||
"MIC_IN", "Mic Jack",
|
||||
"Mic Jack", "Mic Bias",
|
||||
"Headphone Jack", "HP_OUT";
|
||||
mux-int-port = <1>;
|
||||
mux-ext-port = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ecspi2 {
|
||||
fsl,spi-num-chipselects = <1>;
|
||||
cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ecspi3 {
|
||||
fsl,spi-num-chipselects = <1>;
|
||||
cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
codec: sgtl5000@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
clocks = <&clks 201>;
|
||||
VDDA-supply = <®_3p3v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
eeprom@57 {
|
||||
compatible = "at,24c02";
|
||||
reg = <0x57>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
imx6qdl-rex {
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
/* SGTL5000 sys_mclk */
|
||||
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_audmux: audmuxgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
|
||||
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
|
||||
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
|
||||
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi2: ecspi2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
|
||||
/* CS */
|
||||
MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x000b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi3: ecspi3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
|
||||
/* CS */
|
||||
MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
||||
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
||||
/* Phy reset */
|
||||
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
|
||||
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_led: ledgrp {
|
||||
fsl,pins = <
|
||||
/* user led */
|
||||
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbh1: usbh1grp {
|
||||
fsl,pins = <
|
||||
/* power enable, high active */
|
||||
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x10b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||||
MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
|
||||
/* power enable, high active */
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
||||
/* CD */
|
||||
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
|
||||
/* WP */
|
||||
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1f0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||||
/* CD */
|
||||
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
|
||||
/* WP */
|
||||
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1f0b0
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
fsl,mode = "i2s-slave";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
vbus-supply = <®_usbh1_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbh1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче