diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 9c957c81c688..ed0fcdf7e990 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -122,12 +122,6 @@ config ETRAX100LX_V2
 	help
 	  Support version 2 of the ETRAX 100LX.
 
-config SVINTO_SIM
-	bool "ETRAX-100LX-for-xsim-simulator"
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  Support the xsim ETRAX Simulator.
-
 config ETRAXFS
 	bool "ETRAX-FS-V32"
 	help
diff --git a/arch/cris/arch-v10/kernel/Makefile b/arch/cris/arch-v10/kernel/Makefile
index dcfec41d3533..4841e822cdd1 100644
--- a/arch/cris/arch-v10/kernel/Makefile
+++ b/arch/cris/arch-v10/kernel/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.6 2004/12/13 12:21:51 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
index f932c85fbde4..7d307cce8bd8 100644
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -19,7 +19,6 @@
 #include <linux/delay.h>
 #include <linux/tty.h>
 #include <arch/svinto.h>
-#include <asm/io.h>             /* Get SIMCOUT. */
 
 extern void reset_watchdog(void);
 
@@ -318,12 +317,6 @@ console_write(struct console *co, const char *buf, unsigned int len)
 	if (!port)
 		return;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* no use to simulate the serial debug output */
-	SIMCOUT(buf, len);
-	return;
-#endif
-
         console_write_direct(co, buf, len);
 }
 
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index def0a530e9d4..81570fcd0412 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -457,7 +457,7 @@ IRQ1_interrupt:
 	ba	_Rexit		; Return the standard way
 	nop
 wdog:
-#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+#if defined(CONFIG_ETRAX_WATCHDOG)
 ;; Check if we're waiting for reset to happen, as signalled by
 ;; hard_reset_now setting cause_of_death to a magic value.  If so, just
 ;; get stuck until reset happens.
@@ -523,7 +523,7 @@ _watchdogmsg:
 	.ascii	"Oops: bitten by watchdog\n\0"
 	.previous
 
-#endif /* CONFIG_ETRAX_WATCHDOG and not CONFIG_SVINTO_SIM */
+#endif /* CONFIG_ETRAX_WATCHDOG */
 
 spurious_interrupt:
 	di
diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S
index 137bf52a5596..4a146e1749c9 100644
--- a/arch/cris/arch-v10/kernel/head.S
+++ b/arch/cris/arch-v10/kernel/head.S
@@ -168,13 +168,11 @@ _inflash:
 #endif
 
 	;; Set up waitstates etc according to kernel configuration.
-#ifndef CONFIG_SVINTO_SIM
 	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
 	move.d   $r0, [R_WAITSTATES]
 
 	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
 	move.d   $r0, [R_BUS_CONFIG]
-#endif
 
 	;; We need to initialze DRAM registers before we start using the DRAM
 
@@ -466,7 +464,6 @@ no_command_line:
 
 	move.d	$r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG
 
-#ifndef CONFIG_SVINTO_SIM
 	move.d	$r0,[R_GEN_CONFIG]
 
 #if 0
@@ -701,8 +698,6 @@ no_command_line:
 	move.b	$r0,[R_SERIAL3_TR_CTRL]
 #endif
 
-#endif /* CONFIG_SVINTO_SIM */
-
 	jump	start_kernel	; jump into the C-function start_kernel in init/main.c
 
 	.data
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index ba0e5965d6e3..09cae80a834a 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -5,7 +5,7 @@
  *
  *      Authors: Bjorn Wesen (bjornw@axis.com)
  *
- *      This file contains the interrupt vectors and some 
+ *      This file contains the interrupt vectors and some
  *      helper functions
  *
  */
@@ -182,19 +182,14 @@ void do_multiple_IRQ(struct pt_regs* regs)
    setting the irq vector table.
 */
 
-void __init
-init_IRQ(void)
+void __init init_IRQ(void)
 {
 	int i;
 
 	/* clear all interrupt masks */
-
-#ifndef CONFIG_SVINTO_SIM
 	*R_IRQ_MASK0_CLR = 0xffffffff;
 	*R_IRQ_MASK1_CLR = 0xffffffff;
 	*R_IRQ_MASK2_CLR = 0xffffffff;
-#endif
-
 	*R_VECT_MASK_CLR = 0xffffffff;
 
         for (i = 0; i < 256; i++)
@@ -211,25 +206,20 @@ init_IRQ(void)
            executed by the associated break handler, rather than just a jump
            address. therefore we need to setup a default breakpoint handler
            for all breakpoints */
-
 	for (i = 0; i < 16; i++)
                 set_break_vector(i, do_sigtrap);
-        
+
 	/* except IRQ 15 which is the multiple-IRQ handler on Etrax100 */
-
 	set_int_vector(15, multiple_interrupt);
-	
-	/* 0 and 1 which are special breakpoint/NMI traps */
 
+	/* 0 and 1 which are special breakpoint/NMI traps */
 	set_int_vector(0, hwbreakpoint);
 	set_int_vector(1, IRQ1_interrupt);
 
 	/* and irq 14 which is the mmu bus fault handler */
-
 	set_int_vector(14, mmu_bus_fault);
 
 	/* setup the system-call trap, which is reached by BREAK 13 */
-
 	set_break_vector(13, system_call);
 
         /* setup a breakpoint handler for debugging used for both user and
diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c
index 753e9a03cf87..c20e4e8c3663 100644
--- a/arch/cris/arch-v10/kernel/process.c
+++ b/arch/cris/arch-v10/kernel/process.c
@@ -14,7 +14,6 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/fs.h>
-#include <arch/svinto.h>
 #include <linux/init.h>
 #include <arch/system.h>
 #include <linux/ptrace.h>
@@ -56,14 +55,14 @@ void hard_reset_now (void)
 	 * code to know about it than the watchdog handler in entry.S and
 	 * this code, implementing hard reset through the watchdog.
 	 */
-#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+#if defined(CONFIG_ETRAX_WATCHDOG)
 	extern int cause_of_death;
 #endif
 
 	printk("*** HARD RESET ***\n");
 	local_irq_disable();
 
-#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+#if defined(CONFIG_ETRAX_WATCHDOG)
 	cause_of_death = 0xbedead;
 #else
 	/* Since we dont plan to keep on resetting the watchdog,
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index e6a722715a8d..b5eb5cd2f60b 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -14,7 +14,6 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <arch/svinto.h>
 #include <asm/types.h>
 #include <asm/signal.h>
 #include <asm/io.h>
@@ -34,7 +33,7 @@ unsigned long get_ns_in_jiffie(void)
 
 	local_irq_save(flags);
 	timer_count = *R_TIMER0_DATA;
-	presc_count = *R_TIM_PRESC_STATUS;  
+	presc_count = *R_TIM_PRESC_STATUS;
 	/* presc_count might be wrapped */
 	t1 = *R_TIMER0_DATA;
 
@@ -50,7 +49,7 @@ unsigned long get_ns_in_jiffie(void)
 		presc_count =  PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2;
 	}
 
-	ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) + 
+	ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) +
 	     ( (presc_count) * (1000000000/PRESCALE_FREQ));
 	return ns;
 }
@@ -80,7 +79,7 @@ static u32 cris_v10_gettimeoffset(void)
  * by the R_WATCHDOG register. The R_WATCHDOG register contains an enable bit
  * and a 3-bit key value. The effect of writing to the R_WATCHDOG register is
  * described in the table below:
- * 
+ *
  *   Watchdog    Value written:
  *   state:      To enable:  To key:      Operation:
  *   --------    ----------  -------      ----------
@@ -89,15 +88,15 @@ static u32 cris_v10_gettimeoffset(void)
  *   started         0       ~key         Stop watchdog
  *   started         1       ~key         Restart watchdog with key = ~key.
  *   started         X       new_key_val  Change key to new_key_val.
- * 
+ *
  * Note: '~' is the bitwise NOT operator.
- * 
+ *
  */
 
 /* right now, starting the watchdog is the same as resetting it */
 #define start_watchdog reset_watchdog
 
-#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+#ifdef CONFIG_ETRAX_WATCHDOG
 static int watchdog_key = 0;  /* arbitrary number */
 #endif
 
@@ -107,10 +106,9 @@ static int watchdog_key = 0;  /* arbitrary number */
 
 #define WATCHDOG_MIN_FREE_PAGES 8
 
-void
-reset_watchdog(void)
+void reset_watchdog(void)
 {
-#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+#if defined(CONFIG_ETRAX_WATCHDOG)
 	/* only keep watchdog happy as long as we have memory left! */
 	if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) {
 		/* reset the watchdog with the inverse of the old key */
@@ -123,28 +121,23 @@ reset_watchdog(void)
 
 /* stop the watchdog - we still need the correct key */
 
-void 
-stop_watchdog(void)
+void stop_watchdog(void)
 {
-#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+#ifdef CONFIG_ETRAX_WATCHDOG
 	watchdog_key ^= 0x7; /* invert key, which is 3 bits */
 	*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) |
 		IO_STATE(R_WATCHDOG, enable, stop);
-#endif	
+#endif
 }
 
 
+extern void cris_do_profile(struct pt_regs *regs);
+
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "xtime_update()" routine every clocktick
  */
-
-//static unsigned short myjiff; /* used by our debug routine print_timestamp */
-
-extern void cris_do_profile(struct pt_regs *regs);
-
-static inline irqreturn_t
-timer_interrupt(int irq, void *dev_id)
+static inline irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct pt_regs *regs = get_irq_regs();
 	/* acknowledge the timer irq */
@@ -160,20 +153,18 @@ timer_interrupt(int irq, void *dev_id)
 		IO_STATE( R_TIMER_CTRL, tm0, run) |
 		IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
 #else
-	*R_TIMER_CTRL = r_timer_ctrl_shadow | 
-		IO_STATE(R_TIMER_CTRL, i0, clr);
+	*R_TIMER_CTRL = r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i0, clr);
 #endif
 
 	/* reset watchdog otherwise it resets us! */
 	reset_watchdog();
-	
+
 	/* Update statistics. */
 	update_process_times(user_mode(regs));
 
 	/* call the real timer interrupt handler */
-
 	xtime_update(1);
-	
+
         cris_do_profile(regs); /* Save profiling information */
         return IRQ_HANDLED;
 }
@@ -186,16 +177,15 @@ static struct irqaction irq2  = {
 	.name = "timer",
 };
 
-void __init
-time_init(void)
-{	
+void __init time_init(void)
+{
 	arch_gettimeoffset = cris_v10_gettimeoffset;
 
-	/* probe for the RTC and read it if it exists 
-	 * Before the RTC can be probed the loops_per_usec variable needs 
-	 * to be initialized to make usleep work. A better value for 
-	 * loops_per_usec is calculated by the kernel later once the 
-	 * clock has started.  
+	/* probe for the RTC and read it if it exists
+	 * Before the RTC can be probed the loops_per_usec variable needs
+	 * to be initialized to make usleep work. A better value for
+	 * loops_per_usec is calculated by the kernel later once the
+	 * clock has started.
 	 */
 	loops_per_usec = 50;
 
@@ -206,7 +196,7 @@ time_init(void)
 	 * Remember that linux/timex.h contains #defines that rely on the
 	 * timer settings below (hz and divide factor) !!!
 	 */
-	
+
 #ifdef USE_CASCADE_TIMERS
 	*R_TIMER_CTRL =
 		IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) |
@@ -217,8 +207,8 @@ time_init(void)
 		IO_STATE( R_TIMER_CTRL, i0, nop) |
 		IO_STATE( R_TIMER_CTRL, tm0, stop_ld) |
 		IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
-	
-	*R_TIMER_CTRL = r_timer_ctrl_shadow = 
+
+	*R_TIMER_CTRL = r_timer_ctrl_shadow =
 		IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) |
 		IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) |
 		IO_STATE( R_TIMER_CTRL, i1, nop) |
@@ -228,18 +218,18 @@ time_init(void)
 		IO_STATE( R_TIMER_CTRL, tm0, run) |
 		IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
 #else
-	*R_TIMER_CTRL = 
-		IO_FIELD(R_TIMER_CTRL, timerdiv1, 192)      | 
+	*R_TIMER_CTRL =
+		IO_FIELD(R_TIMER_CTRL, timerdiv1, 192)      |
 		IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV)      |
-		IO_STATE(R_TIMER_CTRL, i1,        nop)      | 
+		IO_STATE(R_TIMER_CTRL, i1,        nop)      |
 		IO_STATE(R_TIMER_CTRL, tm1,       stop_ld)  |
 		IO_STATE(R_TIMER_CTRL, clksel1,   c19k2Hz)  |
 		IO_STATE(R_TIMER_CTRL, i0,        nop)      |
 		IO_STATE(R_TIMER_CTRL, tm0,       stop_ld)  |
 		IO_STATE(R_TIMER_CTRL, clksel0,   flexible);
-	
+
 	*R_TIMER_CTRL = r_timer_ctrl_shadow =
-		IO_FIELD(R_TIMER_CTRL, timerdiv1, 192)      | 
+		IO_FIELD(R_TIMER_CTRL, timerdiv1, 192)      |
 		IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV)      |
 		IO_STATE(R_TIMER_CTRL, i1,        nop)      |
 		IO_STATE(R_TIMER_CTRL, tm1,       run)      |
@@ -251,16 +241,14 @@ time_init(void)
 	*R_TIMER_PRESCALE = PRESCALE_VALUE;
 #endif
 
-	*R_IRQ_MASK0_SET =
-		IO_STATE(R_IRQ_MASK0_SET, timer0, set); /* unmask the timer irq */
-	
-	/* now actually register the timer irq handler that calls timer_interrupt() */
-	
+	/* unmask the timer irq */
+	*R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer0, set);
+
+	/* now actually register the irq handler that calls timer_interrupt() */
 	setup_irq(2, &irq2); /* irq 2 is the timer0 irq in etrax */
 
 	/* enable watchdog if we should use one */
-
-#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+#if defined(CONFIG_ETRAX_WATCHDOG)
 	printk("Enabling watchdog...\n");
 	start_watchdog();
 
@@ -273,9 +261,7 @@ time_init(void)
 	   driver or infrastructure support yet.  */
 	asm ("setf m");
 
-	*R_IRQ_MASK0_SET =
-		IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set);
-	*R_VECT_MASK_SET =
-		IO_STATE(R_VECT_MASK_SET, nmi, set);
+	*R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set);
+	*R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, nmi, set);
 #endif
 }
diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S
index b9190ff7d0a4..e541d3d8f922 100644
--- a/arch/cris/arch-v10/lib/dram_init.S
+++ b/arch/cris/arch-v10/lib/dram_init.S
@@ -5,9 +5,7 @@
  * Note: This file may not modify r9 because r9 is used to carry
  *       information from the decompresser to the kernel
  *
- * Copyright (C) 2000, 2001 Axis Communications AB
- *
- * Authors:  Mikael Starvik (starvik@axis.com)
+ * Copyright (C) 2000-2012 Axis Communications AB
  *
  */
 
@@ -18,16 +16,15 @@
 
 
 	;; WARNING! The registers r8 and r9 are used as parameters carrying
-	;; information from the decompressor (if the kernel was compressed). 
+	;; information from the decompressor (if the kernel was compressed).
 	;; They should not be used in the code below.
 
-#ifndef CONFIG_SVINTO_SIM	
 	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
 	move.d   $r0, [R_WAITSTATES]
 
 	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
 	move.d   $r0, [R_BUS_CONFIG]
-	
+
 #ifndef CONFIG_ETRAX_SDRAM
 	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
 	move.d   $r0, [R_DRAM_CONFIG]
@@ -38,14 +35,14 @@
 	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
 	moveq    2, $r6	
 _sdram_init:
-	
+
 	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-	
+
 	; Bank configuration
 	move.d   CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0
 	move.d   $r0, [R_SDRAM_CONFIG]
 
-	; Calculate value of mrs_data 
+	; Calculate value of mrs_data
 	; CAS latency = 2 && bus_width = 32 => 0x40
 	; CAS latency = 3 && bus_width = 32 => 0x60
 	; CAS latency = 2 && bus_width = 16 => 0x20
@@ -56,22 +53,22 @@ _sdram_init:
 	and.d    0x00ff0000, $r2
 	bne	 _set_timing
 	lsrq     16, $r2
-	
+
 	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
 	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
 	move.d   $r1, $r3
- 	and.d    0x03, $r1       ; Get CAS latency
+	and.d    0x03, $r1       ; Get CAS latency
 	and.d    0x1000, $r3     ; 50 or 100 MHz?
 	beq      _speed_50
 	nop
-_speed_100:		
+_speed_100:
 	cmp.d    0x00, $r1	; CAS latency = 2?
 	beq      _bw_check
 	nop
-	or.d     0x20, $r2	; CAS latency = 3 
+	or.d     0x20, $r2	; CAS latency = 3
 	ba       _bw_check
 	nop
-_speed_50:			
+_speed_50:
 	cmp.d    0x01, $r1	; CAS latency = 2?
 	beq      _bw_check
 	nop
@@ -86,19 +83,19 @@ _bw_check:
 	; Set timing parameters. Starts master clock
 _set_timing:
 	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
-	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
+	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0
 	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
 	move.d   $r1, $r5
 	or.d     0x0000c000, $r1 ; ref = disable
 	lslq     16, $r2		; mrs data starts at bit 16
-	or.d     $r2, $r1 
-	move.d   $r1, [R_SDRAM_TIMING]	
-		
+	or.d     $r2, $r1
+	move.d   $r1, [R_SDRAM_TIMING]
+
 	; Wait 200us
 	move.d   10000, $r2
 1:	bne      1b
 	subq     1, $r2
-	
+
 	; Issue initialization command sequence
 	move.d   _sdram_commands_start, $r2
 	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
@@ -144,7 +141,6 @@ _sdram_commands_start:
 	.byte   2	; refresh
 	.byte   0	; nop
 	.byte   1	; mrs
-	.byte   0	; nop 
-_sdram_commands_end:		
-#endif
+	.byte   0	; nop
+_sdram_commands_end:
 #endif
diff --git a/arch/cris/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S
index 6f7b3e61260b..655b511fecf3 100644
--- a/arch/cris/boot/rescue/kimagerescue.S
+++ b/arch/cris/boot/rescue/kimagerescue.S
@@ -50,7 +50,6 @@
 
 	nop
 	di
-#ifndef CONFIG_SVINTO_SIM
 	;; setup port PA and PB default initial directions and data
 	;; (so we can flash LEDs, and so that DTR and others are set)
 
@@ -67,7 +66,6 @@
 	;; We need to setup the bus registers before we start using the DRAM
 #include "../../lib/dram_init.S"
 
-#endif
 	;; Setup the stack to a suitably high address.
 	;; We assume 8 MB is the minimum DRAM in an eLinux
 	;; product and put the sp at the top for now.
diff --git a/arch/cris/include/arch-v10/arch/io.h b/arch/cris/include/arch-v10/arch/io.h
index f627ad0b8a3d..4a724172877f 100644
--- a/arch/cris/include/arch-v10/arch/io.h
+++ b/arch/cris/include/arch-v10/arch/io.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_ARCH_CRIS_IO_H
 #define _ASM_ARCH_CRIS_IO_H
 
-#include <arch/svinto.h>
-
 /* Etrax shadow registers - which live in arch/cris/kernel/shadows.c */
 
 extern unsigned long gen_config_ii_shadow;
@@ -34,7 +32,7 @@ extern volatile unsigned long *port_csp4_addr;
 
 /* The LED's on various Etrax-based products are set differently. */
 
-#if defined(CONFIG_ETRAX_NO_LEDS) || defined(CONFIG_SVINTO_SIM)
+#if defined(CONFIG_ETRAX_NO_LEDS)
 #undef CONFIG_ETRAX_PA_LEDS
 #undef CONFIG_ETRAX_PB_LEDS
 #undef CONFIG_ETRAX_CSP0_LEDS
@@ -171,29 +169,4 @@ extern volatile unsigned long *port_csp4_addr;
 #define SOFT_SHUTDOWN()
 #endif
 
-/* Console I/O for simulated etrax100.  Use #ifdef so erroneous
-   use will be evident. */
-#ifdef CONFIG_SVINTO_SIM
-  /* Let's use the ucsim interface since it lets us do write(2, ...) */
-#define SIMCOUT(s,len)							\
-  asm ("moveq 4,$r9	\n\t"						\
-       "moveq 2,$r10	\n\t"						\
-       "move.d %0,$r11	\n\t"						\
-       "move.d %1,$r12	\n\t"						\
-       "push $irp	\n\t"						\
-       "move 0f,$irp	\n\t"						\
-       "jump -6809	\n"						\
-       "0:		\n\t"						\
-       "pop $irp"							\
-       : : "rm" (s), "rm" (len) : "r9","r10","r11","r12","memory")
-#define TRACE_ON() __extension__ \
- ({ int _Foofoo; __asm__ volatile ("bmod [%0],%0" : "=r" (_Foofoo) : "0" \
-			       (255)); _Foofoo; })
-
-#define TRACE_OFF() do { __asm__ volatile ("bmod [%0],%0" :: "r" (254)); } while (0)
-#define SIM_END() do { __asm__ volatile ("bmod [%0],%0" :: "r" (28)); } while (0)
-#define CRIS_CYCLES() __extension__ \
- ({ unsigned long c; asm ("bmod [%1],%0" : "=r" (c) : "r" (27)); c;})
-#endif /* ! defined CONFIG_SVINTO_SIM */
-
 #endif