ARM: bcm2835: device tree updates

The SoC's SDHCI and MMC controllers are added to device tree, and enabled
 in the Raspberry Pi board device tree. Some fixed clocks are added to the
 device tree to support these drivers. These could be replaced by real
 clocks in the future.
 
 A hard-coded memreserve is removed from device tree; the bootloader should
 specify the correct memory node content instead, since the memory layout
 is dynamic.
 
 This branch is based on v3.8-rc3.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRB2uRAAoJEJuNpwkmVCGcbWUP/0+t9FroP+QVadRuCiei9XG8
 gAvnD8CG7/5Oxz488XctQHwZoxZStomfbvBhCUua+UjAcQoXLvpPbUfOwK2tObxo
 OIDijyBtG/Ao8pG3VlL874+QXDv1tIi3GB02kV08FiL45bIXvOqkBFvZrG6MB/im
 aug9YmA8GcBj6N0T/lTfSdhgDyjE3qPicJGdjemFac1O2QVTANya4wzg8ZdMOJe3
 B60VzcsfegCKCZ+otNFiuh7MDpoVuT0N7H/JzrPZSu1jAjDfvo0nHUH2jNIHXtMZ
 GUqQxG0+c5IyXnSp1QyRVmj1B56j9Y2Zxdv+FBqzVAM5U2tvozcXc2PIl1MP++nQ
 lxknQa+NEqpyETaeRDwAKI0K5RWdPsiFk1QcM81IoUR5WXT4y/mMdIFsWzazmZ6s
 HSxyytiMKiQ5uoA2+KN42FSXVn3DtR5qjAPKq1/+fdG9otdsYHZE000tFUYNrY3f
 bZul35fuCMlpfccXOSJ9+0d+Jab4v0sGlp2/e3PK4UeEuEsg7N7RuF1d/DV6OX1G
 CelMrdyny6W0thTYxFN2PAfH/xWFDirW6DzgtQYQbZF6plmu1teltJzaBXdsiYzd
 YiWcKfzzWcBm9tAlVrAL6b0ljJZBLNZE62zJESEefifiqf7Yftk7aIjp7lLcZ2wp
 Jbk5aIyY1oUE1pAf5UgA
 =zsFG
 -----END PGP SIGNATURE-----

Merge tag 'bcm2835-for-3.9-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/dt

From Stephen Warren:
ARM: bcm2835: device tree updates

The SoC's SDHCI and MMC controllers are added to device tree, and enabled
in the Raspberry Pi board device tree. Some fixed clocks are added to the
device tree to support these drivers. These could be replaced by real
clocks in the future.

A hard-coded memreserve is removed from device tree; the bootloader should
specify the correct memory node content instead, since the memory layout
is dynamic.

This branch is based on v3.8-rc3.

* tag 'bcm2835-for-3.9-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: fix clock node aliasing in device tree
  ARM: bcm2835: add I2C controllers to DT
  ARM: bcm2835: add SDHCI node to DT
  ARM: bcm2835 rpi: remove hard-coded memreserve from DT

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -1,5 +1,4 @@
 /dts-v1/;
-/memreserve/ 0x0c000000 0x04000000;
 /include/ "bcm2835.dtsi"
 
 / {
@@ -25,3 +24,18 @@
 		brcm,function = <7>; /* alt3 */
 	};
 };
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&sdhci {
+	status = "okay";
+	bus-width = <4>;
+};

arch/arm/boot/dts/bcm2835.dtsi

@@ -63,5 +63,49 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		i2c0: i2c@20205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			status = "disabled";
+		};
+
+		sdhci: sdhci {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clk_mmc>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk_mmc: mmc {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+		};
+
+		clk_i2c: i2c {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <150000000>;
+		};
 	};
 };