microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARC port updates for Linux 3.10 (part 1) 

* Support for two new platforms based on ARC700
  - Abilis TB10x SoC [Chritisian/Pierrick]
  - Simulator only System-C Model [Mischa]
 
 * ARC specific MM improvements
  - Avoid full TLB flush (ASID increment) on munmap (even single page)
  - VIPT Cache Flushing improvements
    + Delayed dcache flush for non-aliasing dcache (big performance boost)
    + icache flush aliasing agnostic (no need to kill all possible aliases)
 
 * Others
  - Avoid needless rebuild of DTB files for every kernel build
  - Remove builtin cmdline as that is already provided by DeviceTree/bootargs
  - Fixing unaligned access emulation corner case
  - checkpatch fixes [Sachin]
  - Various fixlets [Noam]
  - Minor build failures/cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRiydEAAoJEGnX8d3iisJewBkQAJ/cvIjrIuMMdeDo0bokzZN2
 bfsG8U+V7S0CKjqLyUD1bMRXo7rTgus8hp/klVORRXoAwSKiWhkj0p6dqJjCGUGc
 LqtEPlxaLR1X+pe5wKtpB3j6kTpRwictVhFUqkFACUxGZx1GbYFxdeL8+3oDsepW
 lwidBYgoya+Q4puRfmY/sCTtVhJlwTUi6g0lmpaEPWc3T2s83/u1GnlVBYd9B7yA
 fCYkUceC2ZnuRMfH00sRsjQ3USyyYptGpY8U1nv9STFJ3fC+EestBPppAAwAzcm0
 iiRgo3s314EzfeNRgzjjHrbULnVUJWkrdFXPisWepyPyVjsgnVr84YkO3kiEN6l7
 JM1cUCvJUbKZaOb2iUwrlPOqISNjCyY9QZWwqW6PCG3TBpfQsJM2mnXKnPLvV2v2
 5Ttba4+ETZ3rn4pPIuTeC6REr0aV/Zl1LKeWuk8PXz4aljWrlOrifBN6QkXWr4HU
 4z6X3j2nw4T2LzqwbNYF+xLaDaZZpV8UdvQwOkliCxZ04myx135ImvgOim7Hh9j+
 Ow1Jp9mRZha/44qM3jXdZ6Cv55pEOR4oQJsl6OBNUXgb5bnDcFHz1UpZtzoZ2V+s
 RPozsfnleNXxDIJlCGK96+PG5qVTRQvklowsz6aTP8r+EEbQnrRlnrhi82cQWqnM
 sMxzN320zrt/MWXxec89
 =WeDp
 -----END PGP SIGNATURE-----

Merge tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC port updates from Vineet Gupta:
 "Support for two new platforms based on ARC700:
   - Abilis TB10x SoC [Chritisian/Pierrick]
   - Simulator only System-C Model [Mischa]

  ARC specific MM improvements:
   - Avoid full TLB flush (ASID increment) on munmap (even single page)
   - VIPT Cache Flushing improvements
     + Delayed dcache flush for non-aliasing dcache (big performance boost)
     + icache flush aliasing agnostic (no need to kill all possible aliases)

  Others:
   - Avoid needless rebuild of DTB files for every kernel build
   - Remove builtin cmdline as that is already provided by DeviceTree/bootargs
   - Fixing unaligned access emulation corner case
   - checkpatch fixes [Sachin]
   - Various fixlets [Noam]
   - Minor build failures/cleanups"

* tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (35 commits)
  ARC: [mm] Lazy D-cache flush (non aliasing VIPT)
  ARC: [mm] micro-optimize page size icache invalidate
  ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers
  ARC: [mm] consolidate icache/dcache sync code
  ARC: [mm] optimise icache flush for kernel mappings
  ARC: [mm] optimise icache flush for user mappings
  ARC: [mm] optimize needless full mm TLB flush on munmap
  ARC: Add support for nSIM OSCI System C model
  ARC: [TB10x] Adapt device tree to new compatible string
  ARC: [TB10x] Add support for TB10x platform
  ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
  ARC: Prepare interrupt code for external controllers
  ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy
  ARC: [cmdline] Don't overwrite u-boot provided bootargs
  ARC: [cmdline] Remove CONFIG_CMDLINE
  ARC: [plat-arcfpga] defconfig update
  ARC: unaligned access emulation broken if callee-reg dest of LD/ST
  ARC: unaligned access emulation error handling consolidation
  ARC: Debug/crash-printing Improvements
  ARC: fix typo with clock speed
  ...
This commit is contained in:
Linus Torvalds 2013-05-09 14:36:27 -07:00
Родитель b32729b1ee eacd0e950d
Коммит e30f419245
38 изменённых файлов: 1847 добавлений и 349 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

31
arch/arc/Kconfig
Просмотреть файл

@ -16,8 +16,6 @@ config ARC
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_KERNEL_EXECVE
select GENERIC_KERNEL_THREAD
select GENERIC_PENDING_IRQ if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
@ -61,9 +59,6 @@ config GENERIC_CALIBRATE_DELAY
config GENERIC_HWEIGHT
def_bool y
config BINFMT_ELF
def_bool y
config STACKTRACE_SUPPORT
def_bool y
select STACKTRACE
@ -82,6 +77,7 @@ menu "ARC Architecture Configuration"
menu "ARC Platform/SoC/Board"
source "arch/arc/plat-arcfpga/Kconfig"
source "arch/arc/plat-tb10x/Kconfig"
#New platform adds here
endmenu
@ -134,9 +130,6 @@ if SMP
config ARC_HAS_COH_CACHES
def_bool n
config ARC_HAS_COH_LLSC
def_bool n
config ARC_HAS_COH_RTSC
def_bool n
@ -304,6 +297,9 @@ config ARC_FPU_SAVE_RESTORE
based on actual usage of FPU by a task. Thus our implemn does
this for all tasks in system.
config ARC_CANT_LLSC
def_bool n
menuconfig ARC_CPU_REL_4_10
bool "Enable support for Rel 4.10 features"
default n
@ -314,9 +310,7 @@ menuconfig ARC_CPU_REL_4_10
config ARC_HAS_LLSC
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
default y
depends on ARC_CPU_770
# if SMP, enable LLSC ONLY if ARC implementation has coherent atomics
depends on !SMP || ARC_HAS_COH_LLSC
depends on ARC_CPU_770 && !ARC_CANT_LLSC
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
@ -415,13 +409,6 @@ config ARC_DBG_TLB_MISS_COUNT
Counts number of I and D TLB Misses and exports them via Debugfs
The counters can be cleared via Debugfs as well
config CMDLINE
string "Kernel command line to built-in"
default "print-fatal-signals=1"
help
The default command line which will be appended to the optional
u-boot provided command line (see below)
config CMDLINE_UBOOT
bool "Support U-boot kernel command line passing"
default n
@ -430,8 +417,8 @@ config CMDLINE_UBOOT
command line from the U-boot environment to the Linux kernel then
switch this option on.
ARC U-boot will setup the cmdline in RAM/flash and set r2 to point
to it. kernel startup code will copy the string into cmdline buffer
and also append CONFIG_CMDLINE.
to it. kernel startup code will append this to DeviceTree
/bootargs provided cmdline args.
config ARC_BUILTIN_DTB_NAME
string "Built in DTB"
@ -441,6 +428,10 @@ config ARC_BUILTIN_DTB_NAME
source "kernel/Kconfig.preempt"
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
endmenu # "ARC Architecture Configuration"
source "mm/Kconfig"

13
arch/arc/Makefile
Просмотреть файл

@ -8,6 +8,10 @@
UTS_MACHINE := arc
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := arc-elf32-
endif
KBUILD_DEFCONFIG := fpga_defconfig
cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__
@ -87,20 +91,23 @@ core-y += arch/arc/
core-y += arch/arc/boot/dts/
core-$(CONFIG_ARC_PLAT_FPGA_LEGACY) += arch/arc/plat-arcfpga/
core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/
libs-y += arch/arc/lib/ $(LIBGCC)
boot := arch/arc/boot
#default target for make without any arguements.
KBUILD_IMAGE := bootpImage
all: $(KBUILD_IMAGE)
boot := arch/arc/boot
bootpImage: vmlinux
uImage: vmlinux
boot_targets += uImage uImage.bin uImage.gz
$(boot_targets): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
%.dtb %.dtb.S %.dtb.o: scripts

19
arch/arc/boot/Makefile
Просмотреть файл

@ -3,7 +3,6 @@ targets := vmlinux.bin vmlinux.bin.gz uImage
# uImage build relies on mkimage being availble on your host for ARC target
# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
# and make sure it's reacable from your PATH
MKIMAGE := $(srctree)/scripts/mkuboot.sh
OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
@ -12,7 +11,12 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \
UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE)
UIMAGE_ENTRYADDR = $(LINUX_START_TEXT)
UIMAGE_COMPRESSION = gzip
suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
targets += uImage uImage.bin uImage.gz
extra-y += vmlinux.bin vmlinux.bin.gz
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
@ -20,7 +24,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,uimage)
$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
$(call if_changed,uimage,none)
PHONY += FORCE
$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,uimage,gzip)
$(obj)/uImage: $(obj)/uImage.$(suffix-y)
@ln -sf $(notdir $<) $@
@echo ' Image $@ is ready'

4
arch/arc/boot/dts/Makefile
Просмотреть файл

@ -8,6 +8,8 @@ endif
obj-y += $(builtindtb-y).dtb.o
targets += $(builtindtb-y).dtb
.SECONDARY: $(obj)/$(builtindtb-y).dtb.S
dtbs: $(addprefix $(obj)/, $(builtindtb-y).dtb)
clean-files := *.dtb
clean-files := *.dtb *.dtb.S

340
arch/arc/boot/dts/abilis_tb100.dtsi Normal file
Просмотреть файл

@ -0,0 +1,340 @@
/*
* Abilis Systems TB100 SOC device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/include/ "abilis_tb10x.dtsi"
/* interrupt specifiers
* --------------------
* 0: rising, 1: low, 2: high, 3: falling,
*/
/ {
clock-frequency = <500000000>; /* 500 MHZ */
soc100 {
bus-frequency = <166666666>;
pll0: oscillator {
clock-frequency = <1000000000>;
};
cpu_clk: clkdiv_cpu {
clock-mult = <1>;
clock-div = <2>;
};
ahb_clk: clkdiv_ahb {
clock-mult = <1>;
clock-div = <6>;
};
iomux: iomux@FF10601c {
/* Port 1 */
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
pingrp = "mis0_pins";
};
pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */
pingrp = "mis1_pins";
};
pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */
pingrp = "gpioa_pins";
};
pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */
pingrp = "mip1_pins";
};
/* Port 2 */
pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */
pingrp = "mis2_pins";
};
pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */
pingrp = "mis3_pins";
};
pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */
pingrp = "gpioc_pins";
};
pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */
pingrp = "mip3_pins";
};
/* Port 3 */
pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */
pingrp = "mis4_pins";
};
pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */
pingrp = "mis5_pins";
};
pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */
pingrp = "gpioe_pins";
};
pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */
pingrp = "mip5_pins";
};
/* Port 4 */
pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */
pingrp = "mis6_pins";
};
pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */
pingrp = "mis7_pins";
};
pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */
pingrp = "gpiog_pins";
};
pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */
pingrp = "mip7_pins";
};
/* Port 5 */
pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */
pingrp = "gpioj_pins";
};
pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */
pingrp = "gpiok_pins";
};
pctl_ciplus: pctl-ciplus { /* CI+ interface */
pingrp = "ciplus_pins";
};
pctl_mcard: pctl-mcard { /* M-Card interface */
pingrp = "mcard_pins";
};
/* Port 6 */
pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */
pingrp = "mop_pins";
};
pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
pingrp = "mos0_pins";
};
pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
pingrp = "mos1_pins";
};
pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
pingrp = "mos2_pins";
};
pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
pingrp = "mos3_pins";
};
/* Port 7 */
pctl_uart0: pctl-uart0 { /* UART 0 */
pingrp = "uart0_pins";
};
pctl_uart1: pctl-uart1 { /* UART 1 */
pingrp = "uart1_pins";
};
pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */
pingrp = "gpiol_pins";
};
pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */
pingrp = "gpiom_pins";
};
/* Port 8 */
pctl_spi3: pctl-spi3 {
pingrp = "spi3_pins";
};
/* Port 9 */
pctl_spi1: pctl-spi1 {
pingrp = "spi1_pins";
};
pctl_gpio_n: pctl-gpio-n {
pingrp = "gpion_pins";
};
/* Unmuxed GPIOs */
pctl_gpio_b: pctl-gpio-b {
pingrp = "gpiob_pins";
};
pctl_gpio_d: pctl-gpio-d {
pingrp = "gpiod_pins";
};
pctl_gpio_f: pctl-gpio-f {
pingrp = "gpiof_pins";
};
pctl_gpio_h: pctl-gpio-h {
pingrp = "gpioh_pins";
};
pctl_gpio_i: pctl-gpio-i {
pingrp = "gpioi_pins";
};
};
gpioa: gpio@FF140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF140000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <0>;
gpio-pins = <&pctl_gpio_a>;
};
gpiob: gpio@FF141000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF141000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <3>;
gpio-pins = <&pctl_gpio_b>;
};
gpioc: gpio@FF142000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF142000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <5>;
gpio-pins = <&pctl_gpio_c>;
};
gpiod: gpio@FF143000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF143000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <8>;
gpio-pins = <&pctl_gpio_d>;
};
gpioe: gpio@FF144000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF144000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <10>;
gpio-pins = <&pctl_gpio_e>;
};
gpiof: gpio@FF145000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF145000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <13>;
gpio-pins = <&pctl_gpio_f>;
};
gpiog: gpio@FF146000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF146000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <15>;
gpio-pins = <&pctl_gpio_g>;
};
gpioh: gpio@FF147000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF147000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <18>;
gpio-pins = <&pctl_gpio_h>;
};
gpioi: gpio@FF148000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF148000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <20>;
gpio-pins = <&pctl_gpio_i>;
};
gpioj: gpio@FF149000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF149000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <32>;
gpio-pins = <&pctl_gpio_j>;
};
gpiok: gpio@FF14a000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF14A000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <64>;
gpio-pins = <&pctl_gpio_k>;
};
gpiol: gpio@FF14b000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF14B000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <86>;
gpio-pins = <&pctl_gpio_l>;
};
gpiom: gpio@FF14c000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF14C000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <90>;
gpio-pins = <&pctl_gpio_m>;
};
gpion: gpio@FF14d000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF14D000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <94>;
gpio-pins = <&pctl_gpio_n>;
};
};
};

127
arch/arc/boot/dts/abilis_tb100_dvk.dts Normal file
Просмотреть файл

@ -0,0 +1,127 @@
/*
* Abilis Systems TB100 Development Kit PCB device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/dts-v1/;
/include/ "abilis_tb100.dtsi"
/ {
chosen {
bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
};
aliases { };
memory {
device_type = "memory";
reg = <0x80000000 0x08000000>; /* 128M */
};
soc100 {
uart@FF100000 {
pinctrl-names = "abilis,simple-default";
pinctrl-0 = <&pctl_uart0>;
};
ethernet@FE100000 {
phy-mode = "rgmii";
};
i2c0: i2c@FF120000 {
sda-hold-time = <432>;
};
i2c1: i2c@FF121000 {
sda-hold-time = <432>;
};
i2c2: i2c@FF122000 {
sda-hold-time = <432>;
};
i2c3: i2c@FF123000 {
sda-hold-time = <432>;
};
i2c4: i2c@FF124000 {
sda-hold-time = <432>;
};
leds {
compatible = "gpio-leds";
power {
label = "Power";
gpios = <&gpioi 0>;
linux,default-trigger = "default-on";
};
heartbeat {
label = "Heartbeat";
gpios = <&gpioi 1>;
linux,default-trigger = "heartbeat";
};
led2 {
label = "LED2";
gpios = <&gpioi 2>;
default-state = "off";
};
led3 {
label = "LED3";
gpios = <&gpioi 3>;
default-state = "off";
};
led4 {
label = "LED4";
gpios = <&gpioi 4>;
default-state = "off";
};
led5 {
label = "LED5";
gpios = <&gpioi 5>;
default-state = "off";
};
led6 {
label = "LED6";
gpios = <&gpioi 6>;
default-state = "off";
};
led7 {
label = "LED7";
gpios = <&gpioi 7>;
default-state = "off";
};
led8 {
label = "LED8";
gpios = <&gpioi 8>;
default-state = "off";
};
led9 {
label = "LED9";
gpios = <&gpioi 9>;
default-state = "off";
};
led10 {
label = "LED10";
gpios = <&gpioi 10>;
default-state = "off";
};
led11 {
label = "LED11";
gpios = <&gpioi 11>;
default-state = "off";
};
};
};
};

349
arch/arc/boot/dts/abilis_tb101.dtsi Normal file
Просмотреть файл

@ -0,0 +1,349 @@
/*
* Abilis Systems TB101 SOC device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/include/ "abilis_tb10x.dtsi"
/* interrupt specifiers
* --------------------
* 0: rising, 1: low, 2: high, 3: falling,
*/
/ {
clock-frequency = <500000000>; /* 500 MHZ */
soc100 {
bus-frequency = <166666666>;
pll0: oscillator {
clock-frequency = <1000000000>;
};
cpu_clk: clkdiv_cpu {
clock-mult = <1>;
clock-div = <2>;
};
ahb_clk: clkdiv_ahb {
clock-mult = <1>;
clock-div = <6>;
};
iomux: iomux@FF10601c {
/* Port 1 */
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
pingrp = "mis0_pins";
};
pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */
pingrp = "mis1_pins";
};
pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */
pingrp = "gpioa_pins";
};
pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */
pingrp = "mip1_pins";
};
/* Port 2 */
pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */
pingrp = "mis2_pins";
};
pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */
pingrp = "mis3_pins";
};
pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */
pingrp = "gpioc_pins";
};
pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */
pingrp = "mip3_pins";
};
/* Port 3 */
pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */
pingrp = "mis4_pins";
};
pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */
pingrp = "mis5_pins";
};
pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */
pingrp = "gpioe_pins";
};
pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */
pingrp = "mip5_pins";
};
/* Port 4 */
pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */
pingrp = "mis6_pins";
};
pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */
pingrp = "mis7_pins";
};
pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */
pingrp = "gpiog_pins";
};
pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */
pingrp = "mip7_pins";
};
/* Port 5 */
pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */
pingrp = "gpioj_pins";
};
pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */
pingrp = "gpiok_pins";
};
pctl_ciplus: pctl-ciplus { /* CI+ interface */
pingrp = "ciplus_pins";
};
pctl_mcard: pctl-mcard { /* M-Card interface */
pingrp = "mcard_pins";
};
pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */
pingrp = "stc0_pins";
};
pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */
pingrp = "stc1_pins";
};
/* Port 6 */
pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */
pingrp = "mop_pins";
};
pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
pingrp = "mos0_pins";
};
pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
pingrp = "mos1_pins";
};
pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
pingrp = "mos2_pins";
};
pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
pingrp = "mos3_pins";
};
/* Port 7 */
pctl_uart0: pctl-uart0 { /* UART 0 */
pingrp = "uart0_pins";
};
pctl_uart1: pctl-uart1 { /* UART 1 */
pingrp = "uart1_pins";
};
pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */
pingrp = "gpiol_pins";
};
pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */
pingrp = "gpiom_pins";
};
/* Port 8 */
pctl_spi3: pctl-spi3 {
pingrp = "spi3_pins";
};
pctl_jtag: pctl-jtag {
pingrp = "jtag_pins";
};
/* Port 9 */
pctl_spi1: pctl-spi1 {
pingrp = "spi1_pins";
};
pctl_gpio_n: pctl-gpio-n {
pingrp = "gpion_pins";
};
/* Unmuxed GPIOs */
pctl_gpio_b: pctl-gpio-b {
pingrp = "gpiob_pins";
};
pctl_gpio_d: pctl-gpio-d {
pingrp = "gpiod_pins";
};
pctl_gpio_f: pctl-gpio-f {
pingrp = "gpiof_pins";
};
pctl_gpio_h: pctl-gpio-h {
pingrp = "gpioh_pins";
};
pctl_gpio_i: pctl-gpio-i {
pingrp = "gpioi_pins";
};
};
gpioa: gpio@FF140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF140000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <0>;
gpio-pins = <&pctl_gpio_a>;
};
gpiob: gpio@FF141000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF141000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <3>;
gpio-pins = <&pctl_gpio_b>;
};
gpioc: gpio@FF142000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF142000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <5>;
gpio-pins = <&pctl_gpio_c>;
};
gpiod: gpio@FF143000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF143000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <8>;
gpio-pins = <&pctl_gpio_d>;
};
gpioe: gpio@FF144000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF144000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <10>;
gpio-pins = <&pctl_gpio_e>;
};
gpiof: gpio@FF145000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF145000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <13>;
gpio-pins = <&pctl_gpio_f>;
};
gpiog: gpio@FF146000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF146000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <15>;
gpio-pins = <&pctl_gpio_g>;
};
gpioh: gpio@FF147000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF147000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <18>;
gpio-pins = <&pctl_gpio_h>;
};
gpioi: gpio@FF148000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF148000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <20>;
gpio-pins = <&pctl_gpio_i>;
};
gpioj: gpio@FF149000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF149000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <32>;
gpio-pins = <&pctl_gpio_j>;
};
gpiok: gpio@FF14a000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF14A000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <64>;
gpio-pins = <&pctl_gpio_k>;
};
gpiol: gpio@FF14b000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF14B000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <86>;
gpio-pins = <&pctl_gpio_l>;
};
gpiom: gpio@FF14c000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF14C000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <90>;
gpio-pins = <&pctl_gpio_m>;
};
gpion: gpio@FF14d000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 1>;
reg = <0xFF14D000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <94>;
gpio-pins = <&pctl_gpio_n>;
};
};
};

127
arch/arc/boot/dts/abilis_tb101_dvk.dts Normal file
Просмотреть файл

@ -0,0 +1,127 @@
/*
* Abilis Systems TB101 Development Kit PCB device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/dts-v1/;
/include/ "abilis_tb101.dtsi"
/ {
chosen {
bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
};
aliases { };
memory {
device_type = "memory";
reg = <0x80000000 0x08000000>; /* 128M */
};
soc100 {
uart@FF100000 {
pinctrl-names = "abilis,simple-default";
pinctrl-0 = <&pctl_uart0>;
};
ethernet@FE100000 {
phy-mode = "rgmii";
};
i2c0: i2c@FF120000 {
sda-hold-time = <432>;
};
i2c1: i2c@FF121000 {
sda-hold-time = <432>;
};
i2c2: i2c@FF122000 {
sda-hold-time = <432>;
};
i2c3: i2c@FF123000 {
sda-hold-time = <432>;
};
i2c4: i2c@FF124000 {
sda-hold-time = <432>;
};
leds {
compatible = "gpio-leds";
power {
label = "Power";
gpios = <&gpioi 0>;
linux,default-trigger = "default-on";
};
heartbeat {
label = "Heartbeat";
gpios = <&gpioi 1>;
linux,default-trigger = "heartbeat";
};
led2 {
label = "LED2";
gpios = <&gpioi 2>;
default-state = "off";
};
led3 {
label = "LED3";
gpios = <&gpioi 3>;
default-state = "off";
};
led4 {
label = "LED4";
gpios = <&gpioi 4>;
default-state = "off";
};
led5 {
label = "LED5";
gpios = <&gpioi 5>;
default-state = "off";
};
led6 {
label = "LED6";
gpios = <&gpioi 6>;
default-state = "off";
};
led7 {
label = "LED7";
gpios = <&gpioi 7>;
default-state = "off";
};
led8 {
label = "LED8";
gpios = <&gpioi 8>;
default-state = "off";
};
led9 {
label = "LED9";
gpios = <&gpioi 9>;
default-state = "off";
};
led10 {
label = "LED10";
gpios = <&gpioi 10>;
default-state = "off";
};
led11 {
label = "LED11";
gpios = <&gpioi 11>;
default-state = "off";
};
};
};
};

247
arch/arc/boot/dts/abilis_tb10x.dtsi Normal file
Просмотреть файл

@ -0,0 +1,247 @@
/*
* Abilis Systems TB10X SOC device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* interrupt specifiers
* --------------------
* 0: rising, 1: low, 2: high, 3: falling,
*/
/ {
compatible = "abilis,arc-tb10x";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "snps,arc770d";
reg = <0>;
};
};
soc100 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0xfe000000 0xfe000000 0x02000000
0x000F0000 0x000F0000 0x00010000>;
compatible = "abilis,tb10x", "simple-bus";
pll0: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "pll0";
};
cpu_clk: clkdiv_cpu {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clocks = <&pll0>;
clock-output-names = "cpu_clk";
};
ahb_clk: clkdiv_ahb {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clocks = <&pll0>;
clock-output-names = "ahb_clk";
};
iomux: iomux@FF10601c {
#address-cells = <1>;
#size-cells = <1>;
compatible = "abilis,tb10x-iomux";
reg = <0xFF10601c 0x4>;
};
intc: interrupt-controller {
compatible = "snps,arc700-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
tb10x_ictl: pic@fe002000 {
compatible = "abilis,tb10x_ictl";
reg = <0xFE002000 0x20>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31>;
};
uart@FF100000 {
compatible = "snps,dw-apb-uart",
"abilis,simple-pinctrl";
reg = <0xFF100000 0x100>;
clock-frequency = <166666666>;
interrupts = <25 1>;
reg-shift = <2>;
reg-io-width = <4>;
interrupt-parent = <&tb10x_ictl>;
};
ethernet@FE100000 {
compatible = "snps,dwmac-3.70a","snps,dwmac";
reg = <0xFE100000 0x1058>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <6 1>;
interrupt-names = "macirq";
clocks = <&ahb_clk>;
clock-names = "stmmaceth";
};
dma@FE000000 {
compatible = "snps,dma-spear1340";
reg = <0xFE000000 0x400>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <14 1>;
dma-channels = <6>;
dma-requests = <0>;
dma-masters = <1>;
#dma-cells = <3>;
chan_allocation_order = <0>;
chan_priority = <1>;
block_size = <0x7ff>;
data_width = <2 0 0 0>;
clocks = <&ahb_clk>;
clock-names = "hclk";
};
i2c0: i2c@FF120000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF120000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 1>;
clocks = <&ahb_clk>;
};
i2c1: i2c@FF121000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF121000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 1>;
clocks = <&ahb_clk>;
};
i2c2: i2c@FF122000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF122000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 1>;
clocks = <&ahb_clk>;
};
i2c3: i2c@FF123000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF123000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 1>;
clocks = <&ahb_clk>;
};
i2c4: i2c@FF124000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF124000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 1>;
clocks = <&ahb_clk>;
};
spi0: spi@0xFE010000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "abilis,tb100-spi";
num-cs = <1>;
reg = <0xFE010000 0x20>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <26 1>;
clocks = <&ahb_clk>;
};
spi1: spi@0xFE011000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "abilis,tb100-spi",
"abilis,simple-pinctrl";
num-cs = <2>;
reg = <0xFE011000 0x20>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <10 1>;
clocks = <&ahb_clk>;
};
tb10x_tsm: tb10x-tsm@ff316000 {
compatible = "abilis,tb100-tsm";
reg = <0xff316000 0x400>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <17 1>;
output-clkdiv = <4>;
global-packet-delay = <0x21>;
port-packet-delay = <0>;
};
tb10x_stream_proc: tb10x-stream-proc {
compatible = "abilis,tb100-streamproc";
reg = <0xfff00000 0x200>,
<0x000f0000 0x10000>,
<0xfff00200 0x105>,
<0xff10600c 0x1>,
<0xfe001018 0x1>;
reg-names = "mbox",
"sp_iccm",
"mbox_irq",
"cpuctrl",
"a6it_int_force";
interrupt-parent = <&tb10x_ictl>;
interrupts = <20 1>, <19 1>;
interrupt-names = "cmd_irq", "event_irq";
};
tb10x_mdsc0: tb10x-mdscr@FF300000 {
compatible = "abilis,tb100-mdscr";
reg = <0xFF300000 0x7000>;
tb100-mdscr-manage-tsin;
};
tb10x_mscr0: tb10x-mdscr@FF307000 {
compatible = "abilis,tb100-mdscr";
reg = <0xFF307000 0x7000>;
};
tb10x_scr0: tb10x-mdscr@ff30e000 {
compatible = "abilis,tb100-mdscr";
reg = <0xFF30e000 0x4000>;
tb100-mdscr-manage-tsin;
};
tb10x_scr1: tb10x-mdscr@ff312000 {
compatible = "abilis,tb100-mdscr";
reg = <0xFF312000 0x4000>;
tb100-mdscr-manage-tsin;
};
tb10x_wfb: tb10x-wfb@ff319000 {
compatible = "abilis,tb100-wfb";
reg = <0xff319000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <16 1>;
};
};
};

77
arch/arc/boot/dts/nsimosci.dts Normal file
Просмотреть файл

@ -0,0 +1,77 @@
/*
* Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/ {
compatible = "snps,nsimosci";
clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
chosen {
bootargs = "console=tty0 consoleblank=0";
};
aliases {
serial0 = &uart0;
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256M */
};
fpga {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
intc: interrupt-controller {
compatible = "snps,arc700-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
uart0: serial@c0000000 {
compatible = "snps,dw-apb-uart";
reg = <0xc0000000 0x2000>;
interrupts = <11>;
#clock-frequency = <80000000>;
clock-frequency = <3686400>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
status = "okay";
};
pgu0: pgu@c9000000 {
compatible = "snps,arcpgufb";
reg = <0xc9000000 0x400>;
};
ps2: ps2@c9001000 {
compatible = "snps,arc_ps2";
reg = <0xc9000400 0x14>;
interrupts = <13>;
interrupt-names = "arc_ps2_irq";
};
eth0: ethernet@c0003000 {
compatible = "snps,oscilan";
reg = <0xc0003000 0x44>;
interrupts = <7>, <8>;
interrupt-names = "rx", "tx";
};
};
};

3
arch/arc/configs/fpga_defconfig
Просмотреть файл

@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs"
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
@ -24,6 +24,7 @@ CONFIG_ARC_PLAT_FPGA_LEGACY=y
CONFIG_ARC_BOARD_ML509=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y

75
arch/arc/configs/nsimosci_defconfig Normal file
Просмотреть файл

@ -0,0 +1,75 @@
CONFIG_CROSS_COMPILE="arc-elf32-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_FPGA_LEGACY=y
CONFIG_ARC_BOARD_ML509=y
# CONFIG_ARC_IDE is not set
# CONFIG_ARCTANGENT_EMAC is not set
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_XZ_DEC=y

117
arch/arc/configs/tb10x_defconfig Normal file
Просмотреть файл

@ -0,0 +1,117 @@
CONFIG_CROSS_COMPILE="arc-elf32-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="tb10x"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio"
CONFIG_INITRAMFS_ROOT_UID=2100
CONFIG_INITRAMFS_ROOT_GID=501
# CONFIG_RD_GZIP is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLOCK is not set
CONFIG_ARC_PLAT_TB10X=y
CONFIG_ARC_CACHE_LINE_SHIFT=5
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_STACK_NONEXEC=y
CONFIG_HZ=250
CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_DEBUG_FS=y
CONFIG_STMMAC_DA=y
CONFIG_STMMAC_CHAINED=y
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_DW=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

16
arch/arc/include/asm/cacheflush.h
Просмотреть файл

@ -20,12 +20,20 @@
#include <linux/mm.h>
/*
* Semantically we need this because icache doesn't snoop dcache/dma.
* However ARC Cache flush requires paddr as well as vaddr, latter not available
* in the flush_icache_page() API. So we no-op it but do the equivalent work
* in update_mmu_cache()
*/
#define flush_icache_page(vma, page)
void flush_cache_all(void);
void flush_icache_range(unsigned long start, unsigned long end);
void flush_icache_page(struct vm_area_struct *vma, struct page *page);
void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr,
int len);
void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len);
void __inv_icache_page(unsigned long paddr, unsigned long vaddr);
void __flush_dcache_page(unsigned long paddr);
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
@ -58,7 +66,7 @@ void dma_cache_wback(unsigned long start, unsigned long sz);
do { \
memcpy(dst, src, len); \
if (vma->vm_flags & VM_EXEC) \
flush_icache_range_vaddr((unsigned long)(dst), vaddr, len);\
__sync_icache_dcache((unsigned long)(dst), vaddr, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \

3
arch/arc/include/asm/irq.h
Просмотреть файл

@ -9,7 +9,8 @@
#ifndef __ASM_ARC_IRQ_H
#define __ASM_ARC_IRQ_H
#define NR_IRQS 32
#define NR_CPU_IRQS 32 /* number of interrupt lines of ARC770 CPU */
#define NR_IRQS 128 /* allow some CPU external IRQ handling */
/* Platform Independent IRQs */
#define TIMER0_IRQ 3

10
arch/arc/include/asm/serial.h
Просмотреть файл

@ -22,4 +22,14 @@
#define BASE_BAUD (arc_get_core_freq() / 16)
/*
* This is definitely going to break early 8250 consoles on multi-platform
* images but hey, it won't add any code complexity for a debug feature of
* one broken driver.
*/
#ifdef CONFIG_ARC_PLAT_TB10X
#undef BASE_BAUD
#define BASE_BAUD (arc_get_core_freq() / 16 / 3)
#endif
#endif /* _ASM_ARC_SERIAL_H */

16
arch/arc/include/asm/tlb.h
Просмотреть файл

@ -21,20 +21,28 @@
#ifndef __ASSEMBLY__
#define tlb_flush(tlb) local_flush_tlb_mm((tlb)->mm)
#define tlb_flush(tlb) \
do { \
if (tlb->fullmm) \
flush_tlb_mm((tlb)->mm); \
} while (0)
/*
* This pair is called at time of munmap/exit to flush cache and TLB entries
* for mappings being torn down.
* 1) cache-flush part -implemented via tlb_start_vma( ) can be NOP (for now)
* as we don't support aliasing configs in our VIPT D$.
* 2) tlb-flush part - implemted via tlb_end_vma( ) can be NOP as well-
* albiet for difft reasons - its better handled by moving to new ASID
* 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range
*
* Note, read http://lkml.org/lkml/2004/1/15/6
*/
#define tlb_start_vma(tlb, vma)
#define tlb_end_vma(tlb, vma)
#define tlb_end_vma(tlb, vma) \
do { \
if (!tlb->fullmm) \
flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
} while (0)
#define __tlb_remove_tlb_entry(tlb, ptep, address)

2
arch/arc/kernel/asm-offsets.c
Просмотреть файл

@ -11,9 +11,9 @@
#include <linux/interrupt.h>
#include <linux/thread_info.h>
#include <linux/kbuild.h>
#include <linux/ptrace.h>
#include <asm/hardirq.h>
#include <asm/page.h>
#include <asm/ptrace.h>
int main(void)
{

2
arch/arc/kernel/clk.c
Просмотреть файл

@ -8,7 +8,7 @@
#include <asm/clk.h>
unsigned long core_freq = 800000000;
unsigned long core_freq = 80000000;
/*
* As of now we default to device-tree provided clock

2
arch/arc/kernel/disasm.c
Просмотреть файл

@ -12,8 +12,8 @@
#include <linux/types.h>
#include <linux/kprobes.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/disasm.h>
#include <asm/uaccess.h>
#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \
defined(CONFIG_KPROBES)

8
arch/arc/kernel/entry.S
Просмотреть файл

@ -393,12 +393,14 @@ ARC_ENTRY EV_TLBProtV
#ifdef CONFIG_ARC_MISALIGN_ACCESS
SAVE_CALLEE_SAVED_USER
mov r3, sp ; callee_regs
#endif
bl do_misaligned_access
#ifdef CONFIG_ARC_MISALIGN_ACCESS
DISCARD_CALLEE_SAVED_USER
; TBD: optimize - do this only if a callee reg was involved
; either a dst of emulated LD/ST or src with address-writeback
RESTORE_CALLEE_SAVED_USER
#else
bl do_misaligned_error
#endif
b ret_from_exception

25
arch/arc/kernel/irq.c
Просмотреть файл

@ -11,6 +11,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
#include "../../drivers/irqchip/irqchip.h"
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/mach_desc.h>
@ -26,7 +28,7 @@
* -Disable all IRQs (on CPU side)
* -Optionally, setup the High priority Interrupts as Level 2 IRQs
*/
void __init arc_init_IRQ(void)
void __cpuinit arc_init_IRQ(void)
{
int level_mask = 0;
@ -97,15 +99,13 @@ static const struct irq_domain_ops arc_intc_domain_ops = {
static struct irq_domain *root_domain;
void __init init_onchip_IRQ(void)
static int __init
init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
{
struct device_node *intc = NULL;
if (parent)
panic("DeviceTree incore intc not a root irq controller\n");
intc = of_find_compatible_node(NULL, NULL, "snps,arc700-intc");
if(!intc)
panic("DeviceTree Missing incore intc\n");
root_domain = irq_domain_add_legacy(intc, NR_IRQS, 0, 0,
root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
&arc_intc_domain_ops, NULL);
if (!root_domain)
@ -113,8 +113,12 @@ void __init init_onchip_IRQ(void)
/* with this we don't need to export root_domain */
irq_set_default_host(root_domain);
return 0;
}
IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
/*
* Late Interrupt system init called from start_kernel for Boot CPU only
*
@ -123,12 +127,13 @@ void __init init_onchip_IRQ(void)
*/
void __init init_IRQ(void)
{
init_onchip_IRQ();
/* Any external intc can be setup here */
if (machine_desc->init_irq)
machine_desc->init_irq();
/* process the entire interrupt tree in one go */
irqchip_init();
#ifdef CONFIG_SMP
/* Master CPU can initialize it's side of IPI */
if (machine_desc->init_smp)

1
arch/arc/kernel/kprobes.c
Просмотреть файл

@ -10,7 +10,6 @@
#include <linux/kprobes.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
#include <linux/sched.h>
#include <linux/uaccess.h>

38
arch/arc/kernel/setup.c
Просмотреть файл

@ -14,14 +14,13 @@
#include <linux/module.h>
#include <linux/cpu.h>
#include <linux/of_fdt.h>
#include <linux/cache.h>
#include <asm/sections.h>
#include <asm/arcregs.h>
#include <asm/tlb.h>
#include <asm/cache.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/irq.h>
#include <asm/arcregs.h>
#include <asm/prom.h>
#include <asm/unwind.h>
#include <asm/clk.h>
@ -32,14 +31,14 @@
int running_on_hw = 1; /* vs. on ISS */
char __initdata command_line[COMMAND_LINE_SIZE];
struct machine_desc *machine_desc __initdata;
struct machine_desc *machine_desc __cpuinitdata;
struct task_struct *_current_task[NR_CPUS]; /* For stack switching */
struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
void __init read_arc_build_cfg_regs(void)
void __cpuinit read_arc_build_cfg_regs(void)
{
struct bcr_perip uncached_space;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@ -238,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
return buf;
}
void __init arc_chk_ccms(void)
void __cpuinit arc_chk_ccms(void)
{
#if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@ -273,7 +272,7 @@ void __init arc_chk_ccms(void)
* hardware has dedicated regs which need to be saved/restored on ctx-sw
* (Single Precision uses core regs), thus kernel is kind of oblivious to it
*/
void __init arc_chk_fpu(void)
void __cpuinit arc_chk_fpu(void)
{
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@ -294,7 +293,7 @@ void __init arc_chk_fpu(void)
* such as only for boot CPU etc
*/
void __init setup_processor(void)
void __cpuinit setup_processor(void)
{
char str[512];
int cpu_id = smp_processor_id();
@ -319,24 +318,21 @@ void __init setup_processor(void)
void __init setup_arch(char **cmdline_p)
{
#ifdef CONFIG_CMDLINE_UBOOT
/* Make sure that a whitespace is inserted before */
strlcat(command_line, " ", sizeof(command_line));
#endif
/*
* Append .config cmdline to base command line, which might already
* contain u-boot "bootargs" (handled by head.S, if so configured)
*/
strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
/* Save unparsed command line copy for /proc/cmdline */
strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
/* This also populates @boot_command_line from /bootargs */
machine_desc = setup_machine_fdt(__dtb_start);
if (!machine_desc)
panic("Embedded DT invalid\n");
/* Append any u-boot provided cmdline */
#ifdef CONFIG_CMDLINE_UBOOT
/* Add a whitespace seperator between the 2 cmdlines */
strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
strlcat(boot_command_line, command_line, COMMAND_LINE_SIZE);
#endif
/* Save unparsed command line copy for /proc/cmdline */
*cmdline_p = boot_command_line;
/* To force early parsing of things like mem=xxx */
parse_early_param();

1
arch/arc/kernel/time.c
Просмотреть файл

@ -33,7 +33,6 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>

22
arch/arc/kernel/traps.c
Просмотреть файл

@ -16,11 +16,12 @@
#include <linux/sched.h>
#include <linux/kdebug.h>
#include <linux/uaccess.h>
#include <asm/ptrace.h>
#include <linux/ptrace.h>
#include <linux/kprobes.h>
#include <linux/kgdb.h>
#include <asm/setup.h>
#include <asm/kprobes.h>
#include <asm/unaligned.h>
#include <asm/kgdb.h>
#include <asm/kprobes.h>
void __init trap_init(void)
{
@ -83,6 +84,7 @@ DO_ERROR_INFO(SIGILL, "Invalid Extn Insn", do_extension_fault, ILL_ILLOPC)
DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC)
DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", do_memory_error, BUS_ADRERR)
DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN)
#ifdef CONFIG_ARC_MISALIGN_ACCESS
/*
@ -91,21 +93,11 @@ DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
int do_misaligned_access(unsigned long cause, unsigned long address,
struct pt_regs *regs, struct callee_regs *cregs)
{
if (misaligned_fixup(address, regs, cause, cregs) != 0) {
siginfo_t info;
if (misaligned_fixup(address, regs, cause, cregs) != 0)
return do_misaligned_error(cause, address, regs);
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_ADRALN;
info.si_addr = (void __user *)address;
return handle_exception(cause, "Misaligned Access", regs,
&info);
}
return 0;
}
#else
DO_ERROR_INFO(SIGSEGV, "Misaligned Access", do_misaligned_access, SEGV_ACCERR)
#endif
/*

44
arch/arc/kernel/troubleshoot.c
Просмотреть файл

@ -26,7 +26,6 @@ static noinline void print_reg_file(long *reg_rev, int start_num)
char buf[512];
int n = 0, len = sizeof(buf);
/* weird loop because pt_regs regs rev r12..r0, r25..r13 */
for (i = start_num; i < start_num + 13; i++) {
n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t",
i, (unsigned long)*reg_rev);
@ -34,13 +33,18 @@ static noinline void print_reg_file(long *reg_rev, int start_num)
if (((i + 1) % 3) == 0)
n += scnprintf(buf + n, len - n, "\n");
/* because pt_regs has regs reversed: r12..r0, r25..r13 */
reg_rev--;
}
if (start_num != 0)
n += scnprintf(buf + n, len - n, "\n\n");
/* To continue printing callee regs on same line as scratch regs */
if (start_num == 0)
pr_info("%s", buf);
else
pr_cont("%s\n", buf);
}
static void show_callee_regs(struct callee_regs *cregs)
@ -83,6 +87,10 @@ static void show_faulting_vma(unsigned long address, char *buf)
dev_t dev = 0;
char *nm = buf;
/* can't use print_vma_addr() yet as it doesn't check for
* non-inclusive vma
*/
vma = find_vma(current->active_mm, address);
/* check against the find_vma( ) behaviour which returns the next VMA
@ -98,11 +106,14 @@ static void show_faulting_vma(unsigned long address, char *buf)
ino = inode->i_ino;
}
pr_info(" @off 0x%lx in [%s]\n"
" VMA: 0x%08lx to 0x%08lx\n\n",
address - vma->vm_start, nm, vma->vm_start, vma->vm_end);
} else
" VMA: 0x%08lx to 0x%08lx\n",
vma->vm_start < TASK_UNMAPPED_BASE ?
address : address - vma->vm_start,
nm, vma->vm_start, vma->vm_end);
} else {
pr_info(" @No matching VMA found\n");
}
}
static void show_ecr_verbose(struct pt_regs *regs)
{
@ -120,7 +131,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
/* For DTLB Miss or ProtV, display the memory involved too */
if (vec == ECR_V_DTLB_MISS) {
pr_cont("Invalid (%s) @ 0x%08lx by insn @ 0x%08lx\n",
pr_cont("Invalid %s 0x%08lx by insn @ 0x%08lx\n",
(cause_code == 0x01) ? "Read From" :
((cause_code == 0x02) ? "Write to" : "EX"),
address, regs->ret);
@ -168,20 +179,23 @@ void show_regs(struct pt_regs *regs)
if (current->thread.cause_code)
show_ecr_verbose(regs);
pr_info("[EFA]: 0x%08lx\n", current->thread.fault_address);
pr_info("[ERET]: 0x%08lx (PC of Faulting Instr)\n", regs->ret);
pr_info("[EFA ]: 0x%08lx\n[BLINK ]: %pS\n[ERET ]: %pS\n",
current->thread.fault_address,
(void *)regs->blink, (void *)regs->ret);
if (user_mode(regs))
show_faulting_vma(regs->ret, buf); /* faulting code, not data */
/* can't use print_vma_addr() yet as it doesn't check for
* non-inclusive vma
*/
pr_info("[STAT32]: 0x%08lx", regs->status32);
/* print special regs */
pr_info("status32: 0x%08lx\n", regs->status32);
pr_info(" SP: 0x%08lx\tFP: 0x%08lx\n", regs->sp, regs->fp);
pr_info("BTA: 0x%08lx\tBLINK: 0x%08lx\n",
regs->bta, regs->blink);
#define STS_BIT(r, bit) r->status32 & STATUS_##bit##_MASK ? #bit : ""
if (!user_mode(regs))
pr_cont(" : %2s %2s %2s %2s %2s\n",
STS_BIT(regs, AE), STS_BIT(regs, A2), STS_BIT(regs, A1),
STS_BIT(regs, E2), STS_BIT(regs, E1));
pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n",
regs->bta, regs->sp, regs->fp);
pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);

277
arch/arc/mm/cache_arc700.c
Просмотреть файл

@ -72,16 +72,6 @@
#include <asm/cachectl.h>
#include <asm/setup.h>
#ifdef CONFIG_ARC_HAS_ICACHE
static void __ic_line_inv_no_alias(unsigned long, int);
static void __ic_line_inv_2_alias(unsigned long, int);
static void __ic_line_inv_4_alias(unsigned long, int);
/* Holds the ptr to flush routine, dependign on size due to aliasing issues */
static void (*___flush_icache_rtn) (unsigned long, int);
#endif
char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
{
int n = 0;
@ -109,7 +99,7 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
* the cpuinfo structure for later use.
* No Validation done here, simply read/convert the BCRs
*/
void __init read_decode_cache_bcr(void)
void __cpuinit read_decode_cache_bcr(void)
{
struct bcr_cache ibcr, dbcr;
struct cpuinfo_arc_cache *p_ic, *p_dc;
@ -141,7 +131,7 @@ void __init read_decode_cache_bcr(void)
* 3. Enable the Caches, setup default flush mode for D-Cache
* 3. Calculate the SHMLBA used by user space
*/
void __init arc_cache_init(void)
void __cpuinit arc_cache_init(void)
{
unsigned int temp;
unsigned int cpu = smp_processor_id();
@ -171,30 +161,6 @@ void __init arc_cache_init(void)
}
#endif
/*
* if Cache way size is <= page size then no aliasing exhibited
* otherwise ratio determines num of aliases.
* e.g. 32K I$, 2 way set assoc, 8k pg size
* way-sz = 32k/2 = 16k
* way-pg-ratio = 16k/8k = 2, so 2 aliases possible
* (meaning 1 line could be in 2 possible locations).
*/
way_pg_ratio = ic->sz / ARC_ICACHE_WAYS / PAGE_SIZE;
switch (way_pg_ratio) {
case 0:
case 1:
___flush_icache_rtn = __ic_line_inv_no_alias;
break;
case 2:
___flush_icache_rtn = __ic_line_inv_2_alias;
break;
case 4:
___flush_icache_rtn = __ic_line_inv_4_alias;
break;
default:
panic("Unsupported I-Cache Sz\n");
}
#endif
/* Enable/disable I-Cache */
@ -391,75 +357,38 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz,
/*
* I-Cache Aliasing in ARC700 VIPT caches
*
* For fetching code from I$, ARC700 uses vaddr (embedded in program code)
* to "index" into SET of cache-line and paddr from MMU to match the TAG
* in the WAYS of SET.
* ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
* The orig Cache Management Module "CDU" only required paddr to invalidate a
* certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
* Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
* the exact same line.
*
* However the CDU iterface (to flush/inv) lines from software, only takes
* paddr (to have simpler hardware interface). For simpler cases, using paddr
* alone suffices.
* e.g. 2-way-set-assoc, 16K I$ (8k MMU pg sz, 32b cache line size):
* way_sz = cache_sz / num_ways = 16k/2 = 8k
* num_sets = way_sz / line_sz = 8k/32 = 256 => 8 bits
* Ignoring the bottom 5 bits corresp to the off within a 32b cacheline,
* bits req for calc set-index = bits 12:5 (0 based). Since this range fits
* inside the bottom 13 bits of paddr, which are same for vaddr and paddr
* (with 8k pg sz), paddr alone can be safely used by CDU to unambigously
* locate a cache-line.
*
* However for a difft sized cache, say 32k I$, above math yields need
* for 14 bits of vaddr to locate a cache line, which can't be provided by
* paddr, since the bit 13 (0 based) might differ between the two.
*
* This lack of extra bits needed for correct line addressing, defines the
* classical problem of Cache aliasing with VIPT architectures
* num_aliases = 1 << extra_bits
* e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz => 2 aliases
* 2-way-set-assoc, 64K I$ with 8k MMU pg sz => 4 aliases
* 2-way-set-assoc, 16K I$ with 8k MMU pg sz => NO aliases
* However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
* paddr alone could not be used to correctly index the cache.
*
* ------------------
* MMU v1/v2 (Fixed Page Size 8k)
* ------------------
* The solution was to provide CDU with these additonal vaddr bits. These
* would be bits [x:13], x would depend on cache-geom.
* would be bits [x:13], x would depend on cache-geometry, 13 comes from
* standard page size of 8k.
* H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
* of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
* orig 5 bits of paddr were anyways ignored by CDU line ops, as they
* represent the offset within cache-line. The adv of using this "clumsy"
* interface for additional info was no new reg was needed in CDU.
* interface for additional info was no new reg was needed in CDU programming
* model.
*
* 17:13 represented the max num of bits passable, actual bits needed were
* fewer, based on the num-of-aliases possible.
* -for 2 alias possibility, only bit 13 needed (32K cache)
* -for 4 alias possibility, bits 14:13 needed (64K cache)
*
* Since vaddr was not available for all instances of I$ flush req by core
* kernel, the only safe way (non-optimal though) was to kill all possible
* lines which could represent an alias (even if they didnt represent one
* in execution).
* e.g. for 64K I$, 4 aliases possible, so we did
* flush start
* flush start | 0x01
* flush start | 0x2
* flush start | 0x3
*
* The penalty was invoking the operation itself, since tag match is anyways
* paddr based, a line which didn't represent an alias would not match the
* paddr, hence wont be killed
*
* Note that aliasing concerns are independent of line-sz for a given cache
* geometry (size + set_assoc) because the extra bits required by line-sz are
* reduced from the set calc.
* e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz and using math above
* 32b line-sz: 9 bits set-index-calc, 5 bits offset-in-line => 1 extra bit
* 64b line-sz: 8 bits set-index-calc, 6 bits offset-in-line => 1 extra bit
*
* ------------------
* MMU v3
* ------------------
* This ver of MMU supports var page sizes (1k-16k) - Linux will support
* 8k (default), 16k and 4k.
* This ver of MMU supports variable page sizes (1k-16k): although Linux will
* only support 8k (default), 16k and 4k.
* However from hardware perspective, smaller page sizes aggrevate aliasing
* meaning more vaddr bits needed to disambiguate the cache-line-op ;
* the existing scheme of piggybacking won't work for certain configurations.
@ -468,113 +397,27 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz,
*/
/***********************************************************
* Machine specific helpers for per line I-Cache invalidate.
* 3 routines to accpunt for 1, 2, 4 aliases possible
* Machine specific helper for per line I-Cache invalidate.
*/
static void __ic_line_inv_no_alias(unsigned long start, int num_lines)
{
while (num_lines-- > 0) {
#if (CONFIG_ARC_MMU_VER > 2)
write_aux_reg(ARC_REG_IC_PTAG, start);
#endif
write_aux_reg(ARC_REG_IC_IVIL, start);
start += ARC_ICACHE_LINE_LEN;
}
}
static void __ic_line_inv_2_alias(unsigned long start, int num_lines)
{
while (num_lines-- > 0) {
#if (CONFIG_ARC_MMU_VER > 2)
/*
* MMU v3, CDU prog model (for line ops) now uses a new IC_PTAG
* reg to pass the "tag" bits and existing IVIL reg only looks
* at bits relevant for "index" (details above)
* Programming Notes:
* -when writing tag to PTAG reg, bit chopping can be avoided,
* CDU ignores non-tag bits.
* -Ideally "index" must be computed from vaddr, but it is not
* avail in these rtns. So to be safe, we kill the lines in all
* possible indexes corresp to num of aliases possible for
* given cache config.
*/
write_aux_reg(ARC_REG_IC_PTAG, start);
write_aux_reg(ARC_REG_IC_IVIL,
start & ~(0x1 << PAGE_SHIFT));
write_aux_reg(ARC_REG_IC_IVIL, start | (0x1 << PAGE_SHIFT));
#else
write_aux_reg(ARC_REG_IC_IVIL, start);
write_aux_reg(ARC_REG_IC_IVIL, start | 0x01);
#endif
start += ARC_ICACHE_LINE_LEN;
}
}
static void __ic_line_inv_4_alias(unsigned long start, int num_lines)
{
while (num_lines-- > 0) {
#if (CONFIG_ARC_MMU_VER > 2)
write_aux_reg(ARC_REG_IC_PTAG, start);
write_aux_reg(ARC_REG_IC_IVIL,
start & ~(0x3 << PAGE_SHIFT));
write_aux_reg(ARC_REG_IC_IVIL,
start & ~(0x2 << PAGE_SHIFT));
write_aux_reg(ARC_REG_IC_IVIL,
start & ~(0x1 << PAGE_SHIFT));
write_aux_reg(ARC_REG_IC_IVIL, start | (0x3 << PAGE_SHIFT));
#else
write_aux_reg(ARC_REG_IC_IVIL, start);
write_aux_reg(ARC_REG_IC_IVIL, start | 0x01);
write_aux_reg(ARC_REG_IC_IVIL, start | 0x02);
write_aux_reg(ARC_REG_IC_IVIL, start | 0x03);
#endif
start += ARC_ICACHE_LINE_LEN;
}
}
static void __ic_line_inv(unsigned long start, unsigned long sz)
{
unsigned long flags;
int num_lines, slack;
/*
* Ensure we properly floor/ceil the non-line aligned/sized requests
* and have @start - aligned to cache line, and integral @num_lines
* However page sized flushes can be compile time optimised.
* -@start will be cache-line aligned already (being page aligned)
* -@sz will be integral multiple of line size (being page sized).
*/
if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) {
slack = start & ~ICACHE_LINE_MASK;
sz += slack;
start -= slack;
}
num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN);
local_irq_save(flags);
(*___flush_icache_rtn) (start, num_lines);
local_irq_restore(flags);
}
/* Unlike routines above, having vaddr for flush op (along with paddr),
* prevents the need to speculatively kill the lines in multiple sets
* based on ratio of way_sz : pg_sz
*/
static void __ic_line_inv_vaddr(unsigned long phy_start,
unsigned long vaddr, unsigned long sz)
static void __ic_line_inv_vaddr(unsigned long phy_start, unsigned long vaddr,
unsigned long sz)
{
unsigned long flags;
int num_lines, slack;
unsigned int addr;
/*
* Ensure we properly floor/ceil the non-line aligned/sized requests:
* However page sized flushes can be compile time optimised.
* -@phy_start will be cache-line aligned already (being page aligned)
* -@sz will be integral multiple of line size (being page sized).
*/
if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) {
slack = phy_start & ~ICACHE_LINE_MASK;
sz += slack;
phy_start -= slack;
}
num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN);
#if (CONFIG_ARC_MMU_VER > 2)
@ -595,7 +438,7 @@ static void __ic_line_inv_vaddr(unsigned long phy_start,
write_aux_reg(ARC_REG_IC_IVIL, vaddr);
vaddr += ARC_ICACHE_LINE_LEN;
#else
/* this paddr contains vaddrs bits as needed */
/* paddr contains stuffed vaddrs bits */
write_aux_reg(ARC_REG_IC_IVIL, addr);
#endif
addr += ARC_ICACHE_LINE_LEN;
@ -605,7 +448,6 @@ static void __ic_line_inv_vaddr(unsigned long phy_start,
#else
#define __ic_line_inv(start, sz)
#define __ic_line_inv_vaddr(pstart, vstart, sz)
#endif /* CONFIG_ARC_HAS_ICACHE */
@ -615,10 +457,10 @@ static void __ic_line_inv_vaddr(unsigned long phy_start,
* Exported APIs
*/
/* TBD: use pg_arch_1 to optimize this */
void flush_dcache_page(struct page *page)
{
__dc_line_op((unsigned long)page_address(page), PAGE_SIZE, OP_FLUSH);
/* Make a note that dcache is not yet flushed for this page */
set_bit(PG_arch_1, &page->flags);
}
EXPORT_SYMBOL(flush_dcache_page);
@ -642,8 +484,8 @@ void dma_cache_wback(unsigned long start, unsigned long sz)
EXPORT_SYMBOL(dma_cache_wback);
/*
* This is API for making I/D Caches consistent when modifying code
* (loadable modules, kprobes, etc)
* This is API for making I/D Caches consistent when modifying
* kernel code (loadable modules, kprobes, kgdb...)
* This is called on insmod, with kernel virtual address for CODE of
* the module. ARC cache maintenance ops require PHY address thus we
* need to convert vmalloc addr to PHY addr
@ -652,7 +494,6 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
{
unsigned int tot_sz, off, sz;
unsigned long phy, pfn;
unsigned long flags;
/* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */
@ -673,8 +514,13 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
/* Case: Kernel Phy addr (0x8000_0000 onwards) */
if (likely(kstart > PAGE_OFFSET)) {
__ic_line_inv(kstart, kend - kstart);
__dc_line_op(kstart, kend - kstart, OP_FLUSH);
/*
* The 2nd arg despite being paddr will be used to index icache
* This is OK since no alternate virtual mappings will exist
* given the callers for this case: kprobe/kgdb in built-in
* kernel code only.
*/
__sync_icache_dcache(kstart, kstart, kend - kstart);
return;
}
@ -692,42 +538,41 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
pfn = vmalloc_to_pfn((void *)kstart);
phy = (pfn << PAGE_SHIFT) + off;
sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off);
local_irq_save(flags);
__dc_line_op(phy, sz, OP_FLUSH);
__ic_line_inv(phy, sz);
local_irq_restore(flags);
__sync_icache_dcache(phy, kstart, sz);
kstart += sz;
tot_sz -= sz;
}
}
/*
* Optimised ver of flush_icache_range() with spec callers: ptrace/signals
* where vaddr is also available. This allows passing both vaddr and paddr
* bits to CDU for cache flush, short-circuting the current pessimistic algo
* which kills all possible aliases.
* An added adv of knowing that vaddr is user-vaddr avoids various checks
* and handling for k-vaddr, k-paddr as done in orig ver above
* General purpose helper to make I and D cache lines consistent.
* @paddr is phy addr of region
* @vaddr is typically user or kernel vaddr (vmalloc)
* Howver in one instance, flush_icache_range() by kprobe (for a breakpt in
* builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
* use a paddr to index the cache (despite VIPT). This is fine since since a
* built-in kernel page will not have any virtual mappings (not even kernel)
* kprobe on loadable module is different as it will have kvaddr.
*/
void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr,
int len)
void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
{
__ic_line_inv_vaddr(paddr, u_vaddr, len);
unsigned long flags;
local_irq_save(flags);
__ic_line_inv_vaddr(paddr, vaddr, len);
__dc_line_op(paddr, len, OP_FLUSH);
local_irq_restore(flags);
}
/*
* XXX: This also needs to be optim using pg_arch_1
* This is called when a page-cache page is about to be mapped into a
* user process' address space. It offers an opportunity for a
* port to ensure d-cache/i-cache coherency if necessary.
*/
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
/* wrapper to compile time eliminate alignment checks in flush loop */
void __inv_icache_page(unsigned long paddr, unsigned long vaddr)
{
if (!(vma->vm_flags & VM_EXEC))
return;
__ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
}
__ic_line_inv((unsigned long)page_address(page), PAGE_SIZE);
void __flush_dcache_page(unsigned long paddr)
{
__dc_line_op(paddr, PAGE_SIZE, OP_FLUSH_N_INV);
}
void flush_icache_all(void)

1
arch/arc/mm/fault.c
Просмотреть файл

@ -12,7 +12,6 @@
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/version.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <asm/pgalloc.h>

3
arch/arc/mm/init.c
Просмотреть файл

@ -10,9 +10,6 @@
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#ifdef CONFIG_BLOCK_DEV_RAM
#include <linux/blk.h>
#endif
#include <linux/swap.h>
#include <linux/module.h>
#include <asm/page.h>

2
arch/arc/mm/ioremap.c
Просмотреть файл

@ -12,7 +12,7 @@
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <asm/cache.h>
#include <linux/cache.h>
void __iomem *ioremap(unsigned long paddr, unsigned long size)
{

32
arch/arc/mm/tlb.c
Просмотреть файл

@ -418,23 +418,37 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
local_irq_restore(flags);
}
/* arch hook called by core VM at the end of handle_mm_fault( ),
* when a new PTE is entered in Page Tables or an existing one
* is modified. We aggresively pre-install a TLB entry
/*
* Called at the end of pagefault, for a userspace mapped page
* -pre-install the corresponding TLB entry into MMU
* -Finalize the delayed D-cache flush (wback+inv kernel mapping)
*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddress,
void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
pte_t *ptep)
{
unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
create_tlb(vma, vaddress, ptep);
create_tlb(vma, vaddr, ptep);
/* icache doesn't snoop dcache, thus needs to be made coherent here */
if (vma->vm_flags & VM_EXEC) {
struct page *page = pfn_to_page(pte_pfn(*ptep));
/* if page was dcache dirty, flush now */
int dirty = test_and_clear_bit(PG_arch_1, &page->flags);
if (dirty) {
unsigned long paddr = pte_val(*ptep) & PAGE_MASK;
__flush_dcache_page(paddr);
__inv_icache_page(paddr, vaddr);
}
}
}
/* Read the Cache Build Confuration Registers, Decode them and save into
* the cpuinfo structure for later use.
* No Validation is done here, simply read/convert the BCRs
*/
void __init read_decode_mmu_bcr(void)
void __cpuinit read_decode_mmu_bcr(void)
{
unsigned int tmp;
struct bcr_mmu_1_2 *mmu2; /* encoded MMU2 attr */
@ -466,7 +480,7 @@ void __init read_decode_mmu_bcr(void)
char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
{
int n = 0;
struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ",
p_mmu->ver, TO_KB(p_mmu->pg_sz));
@ -480,7 +494,7 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
return buf;
}
void __init arc_mmu_init(void)
void __cpuinit arc_mmu_init(void)
{
char str[256];
struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;

12
arch/arc/plat-arcfpga/platform.c
Просмотреть файл

@ -224,3 +224,15 @@ MACHINE_START(ML509, "ml509")
.init_smp = iss_model_init_smp,
#endif
MACHINE_END
static const char *nsimosci_compat[] __initdata = {
"snps,nsimosci",
NULL,
};
MACHINE_START(NSIMOSCI, "nsimosci")
.dt_compat = nsimosci_compat,
.init_early = NULL,
.init_machine = plat_fpga_populate_dev,
.init_irq = NULL,
MACHINE_END

36
arch/arc/plat-tb10x/Kconfig Normal file
Просмотреть файл

@ -0,0 +1,36 @@
# Abilis Systems TB10x platform kernel configuration file
#
# Author: Christian Ruppert <christian.ruppert@abilis.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
menuconfig ARC_PLAT_TB10X
bool "Abilis TB10x"
select COMMON_CLK
select PINCTRL
select PINMUX
select ARCH_REQUIRE_GPIOLIB
help
Support for platforms based on the TB10x home media gateway SOC by
Abilis Systems. TB10x is based on the ARC700 CPU architecture.
Say Y if you are building a kernel for one of the SOCs in this
series (e.g. TB100 or TB101). If in doubt say N.
if ARC_PLAT_TB10X
config GENERIC_GPIO
def_bool y
endif

21
arch/arc/plat-tb10x/Makefile Normal file
Просмотреть файл

@ -0,0 +1,21 @@
# Abilis Systems TB10x platform Makefile
#
# Author: Christian Ruppert <christian.ruppert@abilis.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
KBUILD_CFLAGS += -Iarch/arc/plat-tb10x/include
obj-y += tb10x.o

71
arch/arc/plat-tb10x/tb10x.c Normal file
Просмотреть файл

@ -0,0 +1,71 @@
/*
* Abilis Systems TB10x platform initialisation
*
* Copyright (C) Abilis Systems 2012
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <linux/pinctrl/consumer.h>
#include <asm/mach_desc.h>
static void __init tb10x_platform_init(void)
{
of_clk_init(NULL);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void __init tb10x_platform_late_init(void)
{
struct device_node *dn;
/*
* Pinctrl documentation recommends setting up the iomux here for
* all modules which don't require control over the pins themselves.
* Modules which need this kind of assistance are compatible with
* "abilis,simple-pinctrl", i.e. we can easily iterate over them.
* TODO: Does this recommended method work cleanly with pins required
* by modules?
*/
for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") {
struct platform_device *pd = of_find_device_by_node(dn);
struct pinctrl *pctl;
pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default");
if (IS_ERR(pctl)) {
int ret = PTR_ERR(pctl);
dev_err(&pd->dev, "Could not set up pinctrl: %d\n",
ret);
}
}
}
static const char *tb10x_compat[] __initdata = {
"abilis,arc-tb10x",
NULL,
};
MACHINE_START(TB10x, "tb10x")
.dt_compat = tb10x_compat,
.init_machine = tb10x_platform_init,
.init_late = tb10x_platform_late_init,
MACHINE_END