dt-bindings: iio: accel: adxl345: switch to YAML bindings

The ADX345 supports both I2C & SPI bindings.
This change switches from old text bindings, to YAML bindings, and also
tries to make use of the recent multiple-examples support.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
+  both I2C & SPI interfaces.
+    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl345
+      - adi,adxl375
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@2a {
+            compatible = "adi,adxl345";
+            reg = <0x53>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl345";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };

Documentation/devicetree/bindings/iio/accel/adxl345.txt

@@ -1,39 +0,0 @@
-Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
-
-http://www.analog.com/en/products/mems/accelerometers/adxl345.html
-http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
-
-Required properties:
- - compatible : should be one of
-		"adi,adxl345"
-		"adi,adxl375"
- - reg : the I2C address or SPI chip select number of the sensor
-
-Required properties for SPI bus usage:
- - spi-max-frequency : set maximum clock frequency, must be 5000000
- - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
-
-Optional properties:
- - interrupts: interrupt mapping for IRQ as documented in
-   Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example for a I2C device node:
-
-	accelerometer@2a {
-		compatible = "adi,adxl345";
-		reg = <0x53>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-Example for a SPI device node:
-
-	accelerometer@0 {
-		compatible = "adi,adxl345";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		spi-cpol;
-		spi-cpha;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-	};

MAINTAINERS

@@ -551,6 +551,7 @@ W:	http://wiki.analog.com/ADXL345
 W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
 F:	drivers/input/misc/adxl34x.c
+F:	Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
 
 ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>