be2net: add ethtool "-m" option support

This patch adds support for the dump-module-eeprom and module-info
ethtool options.

Signed-off-by: Mark Leonard <mark.leonard@emulex.com>
Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -2176,6 +2176,53 @@ err:
 	return status;
 }
 
+/* Uses sync mcc */
+int be_cmd_read_port_transceiver_data(struct be_adapter *adapter,
+				      u8 page_num, u8 *data)
+{
+	struct be_dma_mem cmd;
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_port_type *req;
+	int status;
+
+	if (page_num > TR_PAGE_A2)
+		return -EINVAL;
+
+	cmd.size = sizeof(struct be_cmd_resp_port_type);
+	cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+	if (!cmd.va) {
+		dev_err(&adapter->pdev->dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+	memset(cmd.va, 0, cmd.size);
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = cmd.va;
+
+	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			       OPCODE_COMMON_READ_TRANSRECV_DATA,
+			       cmd.size, wrb, &cmd);
+
+	req->port = cpu_to_le32(adapter->hba_port_num);
+	req->page_num = cpu_to_le32(page_num);
+	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_port_type *resp = cmd.va;
+
+		memcpy(data, resp->page_data, PAGE_DATA_LEN);
+	}
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+	return status;
+}
+
 int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			    u32 data_size, u32 data_offset,
 			    const char *obj_name, u32 *data_written,

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -1014,28 +1014,15 @@ enum {
 	TR_PAGE_A2 = 0xa2
 };
 
+/* From SFF-8472 spec */
+#define	SFP_PLUS_SFF_8472_COMP	0x5E
+
+#define PAGE_DATA_LEN   256
 struct be_cmd_resp_port_type {
 	struct be_cmd_resp_hdr hdr;
 	u32 page_num;
 	u32 port;
-	struct data {
-		u8 identifier;
-		u8 identifier_ext;
-		u8 connector;
-		u8 transceiver[8];
-		u8 rsvd0[3];
-		u8 length_km;
-		u8 length_hm;
-		u8 length_om1;
-		u8 length_om2;
-		u8 length_cu;
-		u8 length_cu_m;
-		u8 vendor_name[16];
-		u8 rsvd;
-		u8 vendor_oui[3];
-		u8 vendor_pn[16];
-		u8 vendor_rev[4];
-	} data;
+	u8  page_data[PAGE_DATA_LEN];
 };
 
 /******************** Get FW Version *******************/
@@ -2067,6 +2054,8 @@ int be_cmd_set_beacon_state(struct be_adapter *adapter, u8 port_num, u8 beacon,
 			    u8 status, u8 state);
 int be_cmd_get_beacon_state(struct be_adapter *adapter, u8 port_num,
 			    u32 *state);
+int be_cmd_read_port_transceiver_data(struct be_adapter *adapter,
+				      u8 page_num, u8 *data);
 int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			  u32 flash_oper, u32 flash_opcode, u32 buf_size);
 int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,

drivers/net/ethernet/emulex/benet/be_ethtool.c

@@ -1189,6 +1189,58 @@ static int be_set_rxfh(struct net_device *netdev, const u32 *indir,
 	return 0;
 }
 
+static int be_get_module_info(struct net_device *netdev,
+			      struct ethtool_modinfo *modinfo)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	u8 page_data[PAGE_DATA_LEN];
+	int status;
+
+	if (!check_privilege(adapter, MAX_PRIVILEGES))
+		return -EOPNOTSUPP;
+
+	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
+						   page_data);
+	if (!status) {
+		if (!page_data[SFP_PLUS_SFF_8472_COMP]) {
+			modinfo->type = ETH_MODULE_SFF_8079;
+			modinfo->eeprom_len = PAGE_DATA_LEN;
+		} else {
+			modinfo->type = ETH_MODULE_SFF_8472;
+			modinfo->eeprom_len = 2 * PAGE_DATA_LEN;
+		}
+	}
+	return be_cmd_status(status);
+}
+
+static int be_get_module_eeprom(struct net_device *netdev,
+				struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	int status;
+
+	if (!check_privilege(adapter, MAX_PRIVILEGES))
+		return -EOPNOTSUPP;
+
+	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
+						   data);
+	if (status)
+		goto err;
+
+	if (eeprom->offset + eeprom->len > PAGE_DATA_LEN) {
+		status = be_cmd_read_port_transceiver_data(adapter,
+							   TR_PAGE_A2,
+							   data +
+							   PAGE_DATA_LEN);
+		if (status)
+			goto err;
+	}
+	if (eeprom->offset)
+		memcpy(data, data + eeprom->offset, eeprom->len);
+err:
+	return be_cmd_status(status);
+}
+
 const struct ethtool_ops be_ethtool_ops = {
 	.get_settings = be_get_settings,
 	.get_drvinfo = be_get_drvinfo,
@@ -1220,5 +1272,7 @@ const struct ethtool_ops be_ethtool_ops = {
 	.get_rxfh = be_get_rxfh,
 	.set_rxfh = be_set_rxfh,
 	.get_channels = be_get_channels,
-	.set_channels = be_set_channels
+	.set_channels = be_set_channels,
+	.get_module_info = be_get_module_info,
+	.get_module_eeprom = be_get_module_eeprom
 };