Merge branch 'multiplatform/platform-data' into next/multiplatform

* multiplatform/platform-data:
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

Conflicts due to removed files:
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to code removal:
	arch/arm/mach-tegra/board-paz00.c

Context conflicts in:
	drivers/mmc/host/sdhci-tegra.c
	drivers/net/irda/pxaficp_ir.c

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/spi/ep93xx_spi

@@ -26,7 +26,7 @@ arch/arm/mach-ep93xx/ts72xx.c:
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/spi-ep93xx.h>
 
 /* this is our GPIO line used for chip select */
 #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -31,7 +31,7 @@
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 #include <mach/atmel-mci.h>
 
 #include <media/atmel-isi.h>

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -22,7 +22,7 @@
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 
 #include "generic.h"
 

arch/arm/mach-at91/include/mach/atmel-mci.h

@@ -1,7 +1,7 @@
 #ifndef __MACH_ATMEL_MCI_H
 #define __MACH_ATMEL_MCI_H
 
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 
 /**
  * struct mci_dma_data - DMA data for MCI interface

arch/arm/mach-davinci/aemif.c

@@ -15,7 +15,7 @@
 #include <linux/module.h>
 #include <linux/time.h>
 
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 /* Timing value configuration */
 

arch/arm/mach-davinci/board-da830-evm.c

@@ -28,11 +28,11 @@
 
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*

arch/arm/mach-davinci/board-da850-evm.c

@@ -40,10 +40,10 @@
 
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)

arch/arm/mach-davinci/board-dm355-evm.c

@@ -26,11 +26,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -23,11 +23,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-dm365-evm.c

@@ -33,11 +33,11 @@
 
 #include <mach/mux.h>
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
 
 #include <media/tvp514x.h>
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -31,13 +31,13 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -38,11 +38,11 @@
 
 #include <mach/common.h>
 #include <mach/serial.h>
-#include <mach/i2c.h>
-#include <mach/nand.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"

arch/arm/mach-davinci/board-mityomapl138.c

@@ -26,9 +26,9 @@
 #include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define MITYOMAPL138_PHY_ID		""
 

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -31,12 +31,12 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-sffsdr.c

@@ -36,10 +36,10 @@
 #include <asm/mach/flash.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/davinci.h

@@ -24,7 +24,7 @@
 #include <linux/spi/spi.h>
 
 #include <mach/asp.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
 #include <mach/hardware.h>
 
 #include <media/davinci/vpfe_capture.h>

arch/arm/mach-davinci/devices.c

@@ -15,12 +15,12 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
 #include <mach/edma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
 #include <mach/time.h>
 
 #include "davinci.h"

arch/arm/mach-davinci/dm355.c

@@ -27,7 +27,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"

arch/arm/mach-davinci/dm365.c

@@ -30,8 +30,8 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/spi.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -19,12 +19,12 @@
 
 #include <mach/serial.h>
 #include <mach/edma.h>
-#include <mach/i2c.h>
 #include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/pm.h>
-#include <mach/spi.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 extern void __iomem *da8xx_syscfg0_base;
 extern void __iomem *da8xx_syscfg1_base;

arch/arm/mach-davinci/include/mach/tnetv107x.h

@@ -36,8 +36,8 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/mfd/ti_ssp.h>
 
-#include <mach/mmc.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/serial.h>
 
 struct tnetv107x_device_info {

arch/arm/mach-davinci/usb.c

@@ -10,7 +10,7 @@
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000
 

arch/arm/mach-dove/common.c

@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
 #include <plat/time.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"

arch/arm/mach-ep93xx/core.c

@@ -36,9 +36,9 @@
 #include <linux/export.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_keypad.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/keypad-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/mach/map.h>

arch/arm/mach-ep93xx/dma.c

@@ -25,7 +25,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
 #include <mach/hardware.h>
 
 #include "soc.h"

arch/arm/mach-ep93xx/edb93xx.c

@@ -35,8 +35,8 @@
 #include <sound/cs4271.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>

arch/arm/mach-ep93xx/simone.c

@@ -22,7 +22,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>

arch/arm/mach-ep93xx/snappercl15.c

@@ -28,7 +28,7 @@
 #include <linux/mtd/nand.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -30,8 +30,8 @@
 #include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>

arch/arm/mach-exynos/dev-audio.c

@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>

arch/arm/mach-exynos/dev-ohci.c

@@ -15,7 +15,7 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <plat/devs.h>
 #include <plat/usb-phy.h>

arch/arm/mach-exynos/mach-nuri.c

@@ -45,14 +45,14 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/mfc.h>
 #include <plat/fimc-core.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 

arch/arm/mach-exynos/mach-origen.c

@@ -35,8 +35,8 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
@@ -44,7 +44,7 @@
 #include <plat/mfc.h>
 #include <plat/hdmi.h>
 
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 #include <mach/map.h>
 
 #include <drm/exynos_drm.h>

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -32,7 +32,7 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb.h>

arch/arm/mach-exynos/mach-smdkv310.c

@@ -34,16 +34,16 @@
 #include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/mfc.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/hdmi.h>
 
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <drm/exynos_drm.h>
 #include "common.h"

arch/arm/mach-exynos/mach-universal_c210.c

@@ -34,7 +34,7 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
@@ -43,7 +43,7 @@
 #include <plat/fimc-core.h>
 #include <plat/s5p-time.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 

arch/arm/mach-exynos/setup-i2c0.c

@@ -14,7 +14,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/cpu.h>
 

arch/arm/mach-exynos/setup-i2c1.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c2.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c3.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c3_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c4.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c4_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c5.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c5_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c6.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c6_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c7.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c7_cfg_gpio(struct platform_device *dev)

arch/arm/mach-imx/ehci-imx25.c

@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 

arch/arm/mach-imx/ehci-imx27.c

@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 

arch/arm/mach-imx/ehci-imx31.c

@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 

arch/arm/mach-imx/ehci-imx35.c

@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 

arch/arm/mach-imx/ehci-imx5.c

@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define MXC_OTG_OFFSET			0
 #define MXC_H1_OFFSET			0x200

arch/arm/mach-imx/mach-mx31moboard.c

@@ -47,7 +47,7 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ulpi.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
 
 #include "devices-imx31.h"
 

arch/arm/mach-imx/mx1-camera-fiq-ksym.c

@@ -11,7 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
 
 /* IMX camera FIQ handler */
 EXPORT_SYMBOL(mx1_camera_sof_fiq_start);

arch/arm/mach-kirkwood/board-dreamplug.c

@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/board-goflexnet.c

@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/common.c

@@ -26,15 +26,15 @@
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
 #include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
 #include <plat/time.h>
 #include <plat/addr-map.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
 /*****************************************************************************

arch/arm/mach-kirkwood/d2net_v2-setup.c

@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"

arch/arm/mach-kirkwood/db88f6281-bp-setup.c

@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/dockstar-setup.c

@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/guruplug-setup.c

@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/netspace_v2-setup.c

@@ -34,7 +34,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"

arch/arm/mach-kirkwood/netxbig_v2-setup.c

@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"

arch/arm/mach-kirkwood/openrd-setup.c

@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/sheevaplug-setup.c

@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-mmp/aspenite.c

@@ -27,7 +27,7 @@
 #include <mach/irqs.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 
 #include "common.h"
 

arch/arm/mach-mmp/include/mach/mmp2.h

@@ -13,7 +13,7 @@ extern void mmp2_clear_pmic_int(void);
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
 
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;

arch/arm/mach-mmp/include/mach/pxa168.h

@@ -11,9 +11,9 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/pxa168fb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>

arch/arm/mach-mmp/include/mach/pxa910.h

@@ -9,7 +9,7 @@ extern void __init pxa910_init_irq(void);
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;

arch/arm/mach-mmp/sram.c

@@ -22,7 +22,7 @@
 #include <linux/slab.h>
 #include <linux/genalloc.h>
 
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
 
 struct sram_bank_info {
 	char *pool_name;

arch/arm/mach-mmp/teton_bga.c

@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/i2c.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-msm/board-qsd8x50.c

@@ -32,7 +32,7 @@
 #include <mach/irqs.h>
 #include <mach/sirc.h>
 #include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 #include "devices.h"
 #include "common.h"

arch/arm/mach-msm/board-trout-mmc.c

@@ -15,7 +15,7 @@
 
 #include <mach/vreg.h>
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 #include "devices.h"
 

arch/arm/mach-msm/board-trout-panel.c

@@ -14,7 +14,7 @@
 #include <asm/mach-types.h>
 #include <asm/system_info.h>
 
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
 #include <mach/vreg.h>
 
 #include "board-trout.h"

arch/arm/mach-msm/devices-msm7x00.c

@@ -27,7 +27,7 @@
 
 #include "clock.h"
 #include "clock-pcom.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 static struct resource resources_uart1[] = {
 	{

arch/arm/mach-msm/devices-msm7x30.c

@@ -31,7 +31,7 @@
 #include "clock-pcom.h"
 #include "clock-7x30.h"
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 static struct resource resources_uart2[] = {
 	{

arch/arm/mach-msm/devices-qsd8x50.c

@@ -27,7 +27,7 @@
 
 #include <asm/mach/flash.h>
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 #include "clock-pcom.h"
 
 static struct resource resources_uart3[] = {

arch/arm/mach-msm/include/mach/board.h

@@ -18,7 +18,7 @@
 #define __ASM_ARCH_MSM_BOARD_H
 
 #include <linux/types.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 /* platform device data structures */
 

arch/arm/mach-mv78xx0/common.c

@@ -20,8 +20,8 @@
 #include <mach/mv78xx0.h>
 #include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
-#include <plat/ehci-orion.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>

arch/arm/mach-netx/nxdb500.c

@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 #include "fb.h"

arch/arm/mach-netx/nxdkn.c

@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 

arch/arm/mach-netx/nxeb500hmi.c

@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 #include "fb.h"

arch/arm/mach-nomadik/board-nhk8815.c

@@ -34,7 +34,7 @@
 #include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
 
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <mach/fsmc.h>
 
 #include "cpu-8815.h"

arch/arm/mach-orion5x/common.c

@@ -30,8 +30,8 @@
 #include <mach/bridge-regs.h>
 #include <mach/hardware.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>

arch/arm/mach-orion5x/db88f5281-setup.c

@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-pxa/am200epd.c

@@ -32,7 +32,7 @@
 
 #include <mach/pxa25x.h>
 #include <mach/gumstix.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"
 

arch/arm/mach-pxa/am300epd.c

@@ -30,7 +30,7 @@
 
 #include <mach/gumstix.h>
 #include <mach/mfp-pxa25x.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"
 

arch/arm/mach-pxa/balloon3.c

@@ -45,12 +45,12 @@
 #include <mach/pxa27x.h>
 #include <mach/balloon3.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/cm-x270.c

@@ -22,8 +22,8 @@
 #include <linux/spi/libertas_spi.h>
 
 #include <mach/pxa27x.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
 
 #include "generic.h"
 

arch/arm/mach-pxa/cm-x2xx.c

@@ -24,7 +24,7 @@
 #include <mach/pxa25x.h>
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/smemc.h>
 
 #include <asm/hardware/it8152.h>

arch/arm/mach-pxa/cm-x300.c

@@ -48,12 +48,12 @@
 
 #include <mach/pxa300.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
 
 #include <asm/mach/map.h>
 

arch/arm/mach-pxa/colibri-evalboard.c

@@ -23,8 +23,8 @@
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa27x-udc.h>
 
 #include "generic.h"

arch/arm/mach-pxa/colibri-pxa270-income.c

@@ -27,11 +27,11 @@
 #include <asm/mach-types.h>
 
 #include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
 #include "generic.h"

arch/arm/mach-pxa/colibri-pxa300.c

@@ -24,8 +24,8 @@
 
 #include <mach/pxa300.h>
 #include <mach/colibri.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/audio.h>
 
 #include "generic.h"

arch/arm/mach-pxa/colibri-pxa320.c

@@ -25,8 +25,8 @@
 
 #include <mach/pxa320.h>
 #include <mach/colibri.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>

arch/arm/mach-pxa/colibri-pxa3xx.c

@@ -24,9 +24,9 @@
 #include <mach/pxa3xx-regs.h>
 #include <mach/mfp-pxa300.h>
 #include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/corgi.c

@@ -46,8 +46,8 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/corgi.h>
 #include <mach/sharpsl_pm.h>

arch/arm/mach-pxa/csb726.c

@@ -23,8 +23,8 @@
 #include <asm/mach/arch.h>
 #include <mach/csb726.h>
 #include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
 #include <mach/smemc.h>
 

arch/arm/mach-pxa/devices.c

@@ -7,17 +7,17 @@
 #include <linux/i2c/pxa-i2c.h>
 
 #include <mach/udc.h>
-#include <mach/pxa3xx-u2d.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
 #include <mach/irqs.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/hardware.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "devices.h"
 #include "generic.h"

arch/arm/mach-pxa/em-x270.c

@@ -42,11 +42,11 @@
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/eseries.c

@@ -32,9 +32,9 @@
 #include <mach/eseries-gpio.h>
 #include <mach/eseries-irq.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
 
 #include "devices.h"
 #include "generic.h"